Error in Cost Report

Hi All,
I am new to CO, I am in support project, my client had getting error in CO report. Can any one explain the process of kp26 and kkf6n.
Regards,

KP26 is used to Price Activity types in a cost center. Pricing activity types (besides giving labor cost) resolves the error message in CK11n concernng activity types not defined for a cost center.
Althea

Similar Messages

Error while Connecting report Best Practices v1.31 with SAP

Hello experts,
I'm facing an issue while trying to connect some of my reports from Best Practices for BI with SAP.
It only happens when it's about info sets, the other ones that are with SAP tables go smoothly without a problem.
The most interesting is I have already one of the reports connected to SAP info sets.
I have already verified the document of steps of creation of additional database that comes with BP pack. They seem ok.
Here goes what Crystal Reports throws to me after changing the data source to SAP:
For report "GL Statement" one of the Financial Analysis one which uses InfoSet: /KYK/IS_FIGL_I3:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: It wasn't indicated any variant for exercise (something like this after translating) - click ok then
- Database connector error: RFC_INVALID_HANDLE
For report "Cost Analysis: Planned vs. Actual Order Costs" one of the Financial Analysis one which uses InfoSet: ZBPBI131_INFO_ODVR and ZBPBI131_INFO_COAS; and also the Query CO_OM_OP_20_Q1:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: check class for selections raised errors - click ok then
- Database connector error: RFC_INVALID_HANDLE
Obs.: Those "Z" infosets are already created in SAP environment.
The one that works fine is one of the Purchasing Analysis reports:
- Purchasing Group Analysis -> InfoSet: /KYK/IS_MCE1
I'm kind of lost to solve this, because I'm not sure if it can be in the SAP JCO or some parameter that was done wrongly in SAP and I have already check possible solutions for both.
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

I re-checked step 3.2.3 - Uploading Crystal User Roles (transaction PFCG) - of the manual where it talks about CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER roles, I noticed in the Authorizations tab that the status was saying it hadn't been generated and I had a yellow sign, so then that was what I did (I generated) as it says in the manual.
Both statuses are now saying "Authorization profile is generated" and the sign is now green on the tab.
I had another issue in the User tab (it was yellow as Authorizations one before generating)....all I needed to do to change to green was comparing user (User Comparison button).
After all that, I tried once more to refresh the Crystal report and I still have the error messages being thrown.
There's one more issue in one of the tabs of PFCG transaction, it is on the Menu one where it is with a red sign, but there's nothing talking about it in the manual. I just have a folder called "Role menu" without anything in it.
Can it be the reason why I'm facing errors when connecting the report to SAP infoSets? (remember one of my reports which is connected to an infoSet works good)
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

Open Balance on Sales Order Cost Report

Hi SAP Group -
I have a couple questions about the settlement of manufacturing variance to COPA.
When our settlement process is complete (production order and sales order both settled to COPA), there is a balance remaining on the sales order cost report which is equal to the manufacturing variance on the production order.
It seems that the manufacturing variance is posting from the production order to the sales order, but is not being assigned to the PSEG and flowing to COPA.
I am looking for advice in two areas:
First, how do we "clear" these balances on old orders that are already settled?
Second, how do we prevent this from happening on future orders?
Thanks !!!

Refer to OSS 183250 and note 186485.
If you dont specify in the settlement profile for the production order that the variances are not transferred from the production order into CO-PA, you will settle the variances to CO-PA twice: once from the production order (broken down into variance categories), and once from the sales order item. The settlement rule still references the material and not the sales order item.
Special Features of Product Cost by Sales Order with Valuated Sales Order Stock
<a href="http://help.sap.com/erp2005_ehp_02/helpdata/en/90/ba66cc446711d189420000e829fbbd/content.htm">Read the topic on 'Special Features of Product Cost by Sales Order with Valuated Sales Order Stock'</a>
You may want to check the period of the variance settlement from mfg order to sales order and ensure the settlement of sales order is also done the same period, if the type is PER.

FRM-92101 error while running report from a button or menu

Hi All,
I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
Arif

Hello Sir,
Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
FROM branch br,
(SELECT gladbrid branchid,
SUM
(CASE
WHEN ga.gl_acc_categry IN ('L', 'I')
THEN gd.gladbalance
ELSE -1 * gd.gladbalance
END
) AS difference
FROM glaccount ga, glaccountdetail gd
WHERE ga.glid = gd.gladglid
GROUP BY gladbrid) dif
WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
and dif.difference!=0
ORDER BY br.bid;
and the code against the button or menu item is---
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('ASSET');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
which has shown the error FRM-92101 and didn't run the report.
In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
It is mentioned that there had no error on my codes.
Arif

Error while generating report in RAR

Hello,
We are getting error while generating reports in RAR.
RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
or cannot see details ,
gives error cannt be displayed.
Thanks,
DK

Hello,
we had same issues, this happed because the disk was full.
Please check with your basis team if the disk is full.
Thanks,
Prasant

Failed to commit objects to server. Error while publishing reports from BW

Hi,
I am getting below error while publishing reports from BW to BO.
"0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
Anyone having any solution for this. Thanks in advance.

Hi Amit
It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
Thank you:-)

What is the meaning of Rem.Order Plan in the PS cost report S_ALR_87013558

Hi,
Does anyone know the meaning of "Rem. Order Plan" column in the PS Budget-related cost report-- S_ALR_87013558 Budget\actual\Commitment\Rem.Plan\Assigned? I understand all the other columns like budget, actuals, commitment and assigned, but I have no idea what the "Rem order plan' means?
Thanks,

In this report it is "Planned Cost - (Actual + Commitment)"
Venkat
Edited by: VenkatSrinvas Konda on Oct 16, 2008 8:09 AM

Plan value(break up) not appearing in sales order cost report

hi
I have done sales order bom in cs61,operation in ca01,in va02 for sales order costing in itemization showing like
material 100
actity 10
total 110
saved and if I see in cost report it show only revenue , cogs(110),but it is not show raw materials and operations.
please advise me what to do?
Thanks and Regards,
Nagesh

Dear Nagesh,
Probably, you need to check the status of the BOM and the Routing in the Header. It should be active/released.
Kind Regards
Umapathi G
Edited by: Umapathi Naidu G on Aug 11, 2011 3:26 PM

Costing Report to Check the Result of MR21

Hi all,
I have tried to change the Sales Order Material Value with MR21. The results can be checked with MB52.
However, I want to check the actual results in accounting and costing aspect.
Could suggest any costing reports that can trace and analysis the costing Sales cost?
Cheers,
Simon

Hi Simon
Use T code CKMPCD and you can see the Price Change docs... You can filter the docs based on Mat No / Period/ etc
It will show you the desired acc/CO docs
Br, Ajay M

Error in Report: Next to amount field i could see 'ERROR' word in report

Guys,
Problem in Report: Next to amount field i could see 'ERROR' word in report
Eg: Invoice Amount : "1200ERROR" it should be like "$1200".
Pls help where do i need to check.
Thanks

Ajeet wrote :
Hi,
It can heppens if all the records getting aggregated in the report are of different currencies and not belonging to one currency.
Do a currency conversion for the key figures and make them all with same currency.
See if the records in the cube for the selection which you have given in the report gives you records with different currency and if it is true then as above said.
Thanks
AJeet
Are you sure ???
The mixed unit values will be displayed as * (by default unless its changed).
ERR comes if unit is not maintained.

Error on Bursting Report for BI Publisher

hi all,
i am getting the following error when i am bursting the report for BI Publisher.
* Nested Exception (Underlying Cause) ---------------
oracle.apps.xdo.servlet.scheduler.ProcessingException: java.lang.NullPointerExce
ption
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.jav
a:2116)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:358)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:520)
Caused by: java.lang.NullPointerException
at com.sun.java.util.collections.Hashtable.get(Hashtable.java:321)
at oracle.apps.xdo.batch.bursting.ProcessEnterpriseDocument.processLayou
t(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unkno
wn Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(
Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endDocument(Unknown Sou
rce)
at oracle.xml.parser.v2.XMLContentHandler.endDocument(XMLContentHandler.
java:119)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingP
arser.java:311)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:263)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown
Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.jav
a:2008)
... 3 more
Kindly Help..
Thanks.

Thanks alot Guru for u r reply, i am attaching more Details regarding my error.
In Reporting options i gave
Reporting folder CCB
Reporting server:BIPUbliser url
Reporting password:Admin
Reproting userid:Admin
I already configured Bill Display Algorithm OBLD_CRYS in installation-frame work
Now i am getting the error the value in the field is not a valid value for the field.
In Console I am getting the error '
SYSUSER - 612791-31-1 2011-05-26 11:32:21,709 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR (schema.rules.BusinessObjectRuleProcessor$Factory) There is more th
an 1 MO for the service 'CILCSVAP': MaintenanceObject_Id(SA), MaintenanceObject_Id(CM_CONT), using 1st one 'MaintenanceObject_Id(SA)'
<May 26, 2011 11:32:22 AM IST> <Error> <HTTP> <BEA-101020> <[ServletContext@4736418[app:SPLWeb module:/spl path:/spl spec-version:2.5]] Servlet failed with Exception
com.splwg.shared.common.ApplicationError: (Server Message)
Category: 3
Number: 501
Call Sequence: ;CIPCSVAP
Program Name: CIPCSVAP
Text: You are not allowed access (directly/indirectly) to this account.
Description: Please contact your security administrator to check your security for this account.
Table:
Field:
at com.splwg.base.support.context.FrameworkSession.addError(FrameworkSession.java:1177)
at com.splwg.base.support.context.FrameworkSession.addError(FrameworkSession.java:1158)
at com.splwg.base.support.cobol.CobolSubprogram.populateError(CobolSubprogram.java:142)
at com.splwg.base.support.cobol.CobolSubprogram.checkForErrors(CobolSubprogram.java:94)
at com.splwg.base.support.cobol.AbstractCobolProgram$CallCobolClosure.run(AbstractCobolProgram.java:214)
Truncated. see log file for complete stacktrace

Error in displaying report

I am geting the following error while displaying report-
Internal error (-101) occured [Message 131-183]
The reports are geting displayed on other pcs but not on my pc.I tried unistalling and re-installing sap but the error was not solved.

Daan,
 The printer was not installed on my pc.After installing printer, the reports are visible.Thanks for u r help.
 Regards,
 Dilip Kumbhar

Error while displaying report

I am getting following error while displaying report in sap business one-
Internal error (-101) occured [Message 131-183]
I tried resintalling sap but it did not solved the problem.The reports are getting displayed on other pc's but not on my pc.

Hi Yogesh,
 I haven't installed any patch on my client machine.
 Regards,
 Dilip Kumbhar

Error with Member Report

HI Gurus,
I have a dimension with single hierarchy, I am able to process the dimension and view the members in a hierarchy on the excel.
On the admin tool under dimension -> Maintain dimension members -> View member Report gives an error that member report cannot be reviewed because of a circular reference and the application terminates. I am able to perform this activity for rest of the dimensions.
Any insight on this.
thanks

When you select the Dimension, Maintain Dimension Members, the Excel file opens, then click the View Member Report, do you get the interface box that allows you to select the dimension hierarchy and properties to add to your report, or do you get the error only? If you are getting the box called Make Report, and the information in the box states, cannot generate report, Error, there is a problem in the member which may indicate a circular reference, then there IS an issue with your hierachy and memberset. I am suprised that the file processes, but I would guess there a bad reference in the existing hierarchy.
My advice would be to take a portion of the dimension file, (ie delete some of the hierarchy), process it and test to see if you can build a report. Once you get to a point where the report may be built successfully, then add back in portions of the hierarchy until you get or find the error or portion of the file that will not allow for a report to be build. This may be an extreme test, but it should help narrow down the place where the report or hierarchy fails. I have tested examples in my system, and the report will not be constructed if the dimension is not processed succesfully.

CRVS2010 Beta - Error: No valid Report Source is available

I am new to using crystal reports in .NET so any (un-jargoned) help is much welcomed and appreciated.
I am implementing an web application on a Windows XP machine using VS2010 and have downloaded and installed the CR4VS2010 beta 2 and the CRforNET40_x86. All installed OK with no errors.
I have embedded a crystal report viewer into my web page and have populated a dataset (myDS) successfully from my SQL server connection earlier in the code.
The report (stoppages.rpt) is an untyped report stored in a separate folder and has 2 datetime parameters to pass in. When I run the web app it runs fine until the parameter boxes appear - I enter 2 valid date values into the parameter boxes when I hit OK I get an error - No valid report source is available.
My code is shown below - I have searched other forums and it was suggested to put in the session.add part but the error occurs with or without this bit in...
Please help - newbie and desparate! Thanks
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
 myReportDocument.Load("C:\Reports\stoppages.rpt")
 myReportDocument.SetDataSource(myDS)
 Session.Add("Report", myReportDocument)
 crvThisReport.ReportSource = myReportDocument
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Oct 13, 2010 7:22 AM

Hi Ludek, I tried adding
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
to the config file but it didnt resolve the problems.
However I think I have found a work-around solution to setting the parameters programmatically rather than use the crystal report viewer pop-up boxes. I am posting my code to help anyone else who might be experiencing the same problems:
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
myReportDocument.Load(Server.MapPath(strRptPath))
myDS.WriteXml(Server.MapPath(strXMLPath), XmlWriteMode.WriteSchema)
myReportDocument.SetDataSource(myDS)
myReportDocument.Refresh()
myReportDocument.SetParameterValue("DateFrom", #9/1/2010 6:35:00 AM#)
myReportDocument.SetParameterValue("DateTo", #9/8/2010 6:35:00 PM#)
crvThisReport.ReportSource = myReportDocument
DateFrom and DateTo are the parameter names within my crystal report.
It seems to be working fine, it stops the crystal report viewer from displaying the parameter pop-up box which stops the error occurring. However, the error still occurs when you want to interact with the report in other ways, ie page navigation, group tree navigation. It still allows me to print, export and zoom in and out, so I will have to disable some buttons and features until this error is resolved - the search continues!
Thanks for all your help and advise.
Edited by: juliep68 on Oct 14, 2010 11:33 PM

Error in Cost Report

Similar Messages

Maybe you are looking for