Plan value(break up) not appearing in sales order cost report

hi
I have done sales order bom in cs61,operation in ca01,in va02 for sales order costing in itemization showing like
material 100
actity 10
total 110
saved and if I see in cost report it show only revenue , cogs(110),but it is not show raw materials and operations.
please advise me what to do?
Thanks and Regards,
Nagesh

Dear Nagesh,
Probably, you need to check the status of the BOM and the Routing in the Header. It should be active/released.
Kind Regards
Umapathi G
Edited by: Umapathi Naidu G on Aug 11, 2011 3:26 PM

Similar Messages

AFS grid value/valuation type not picked in sales order cost estimate

Hi Experts,
We have different valuation types in the material master. This is part of the AFS, where each grid value is a valuation type. While making a sales order cost estimate and in one sales order item, we have 3 grid values (valuation types), system is costing only for one grid value and that too for the entire quantity. This way the costing is wrong as different grid values have different BOMs and routings.
Is there any specific setting to have the grid value to be picked up in the sales order cost estimate? Or am i missing some setting? in general product costing settings or AFS product costing settings?
Best Regards
Vimal

Hi,
Do you mean "sales order costing", please if so then please ref. the link:
http://help.sap.com/saphelp_46c/helpdata/en/90/ba6da4446711d189420000e829fbbd/content.htm
Regards
DSR
Edited by: D.Srinivasa Rao on Nov 25, 2011 8:19 AM

Open Balance on Sales Order Cost Report

Hi SAP Group -
I have a couple questions about the settlement of manufacturing variance to COPA.
When our settlement process is complete (production order and sales order both settled to COPA), there is a balance remaining on the sales order cost report which is equal to the manufacturing variance on the production order.
It seems that the manufacturing variance is posting from the production order to the sales order, but is not being assigned to the PSEG and flowing to COPA.
I am looking for advice in two areas:
First, how do we "clear" these balances on old orders that are already settled?
Second, how do we prevent this from happening on future orders?
Thanks !!!

Refer to OSS 183250 and note 186485.
If you dont specify in the settlement profile for the production order that the variances are not transferred from the production order into CO-PA, you will settle the variances to <b>CO-PA twice</b>: once from the production order (broken down into variance categories), and once from the sales order item. The settlement rule still references the material and not the sales order item.
Special Features of Product Cost by Sales Order with Valuated Sales Order Stock
<a href="http://help.sap.com/erp2005_ehp_02/helpdata/en/90/ba66cc446711d189420000e829fbbd/content.htm">Read the topic on 'Special Features of Product Cost by Sales Order with Valuated Sales Order Stock'</a>
You may want to check the period of the variance settlement from mfg order to sales order and ensure the settlement of sales order is also done the same period, if the type is PER.

Sales order Cost- Report

Hi,
I have an issue in MCTG. For some sales offices the value of Orders: Cost is showing as zero and for some sales offices the report is showing value.
Why is it so?Any known reasons?
Also is there any standard report which will show sales orders cost per sales organisation for a particular period?
Regards,
Ajit

Hi Rajkumar,
Analyse the report and read the documentation. It is not possible for sap also to give all in one report.
Regards,
Madhu.

Control Costs not Displayed in Process Order Cost Reports

Hi
After Variance calculation and settlement of Process Orders also COntrol COst appearing as Zero, is there any step I am missing or any configuration needs to be adjusted?
Thanks in Advance
Regards
Venkat

Hi,
I checked in IDES system as well, there also using standard settings control costs are not getting updated on the process orders.
I couldn't makeout how the control costs fields get updated in the process order cost reports
Regards
Venkat

Internal Item Number " Items not appearing in Sales order Line form

Hi,
We are in 11.5.7 vis. While choosing an item in the Sales order form, only the line items with type 'chargemaster' and 'vendor' appear. The items with type 'Internal item number' doesn't appear anymore. The item validation organization is set to the Master Inventory organization.(V1).
When i checked the pricelist creation screen, with product attribute - item number, the product value field is empty and greyed out for all the items.
I compiled the system Items flexfield. I tried adding a new product to the pricelist with product attribute-item number,product value - A000 .All the items (with their internal item numbers) appear while choosing the product, but the product description doesn't default and the field remains empty and greyed out.
After saving the item in the price list and if i query for this particular item, the product description appears but the product value now becomes empty and greyed out.
Any explanation as to to why this is behaving so and to rectify the same?
Regards,
Nithya

Hi,
Check item category determination (VOV4) whether the item category is determine with the combination of material item
category group,untill the material being read by the system it will not give the line item no,and also check at VOV8 for your doc
type Item no.increment Ex: 10, is maintained or not ,if not maintain and try.
Regards
Ram

Tax classification screen for item level not appearing in sale order under Billing Doc tab

Hi Expert
while creating sale order Tax classification screen is not appearing for item level under Billing document tab.
Tax classification for customer and Material has already maintained. Tax classification screen is not appearing for USER but same time from our USER ID we can able to see that screen.
please help in above issue. is this related to Authorization issue or other thing need to check.
Regards
Pash@SD

Hi,
As per standard in Sales Order Document you will be able to see the Tax Classification fields in Billing Tab at Header level (for Customer Tax Classification) and at Item level for (Material tax Classification). The values from Customer M<aster is not populated at Header level as per standard but you can populate the value by using the Exit. Material tax classification populated from material master as you can see that at item level.
If for one User you are able to see and for other you are not able to see, kindly check first whether both are using same customer and material, and if yes, then check the User Exit.
Thanks and regards,
Amitesh Anand

Condion Type "VPRS" should not appear in Sales Order, Inquiry, Contract

Hi Gurus,
Normally when you create Sales Order/Inquiry/Contract, in the Condition Tab VPRS Condition Type will appear and show the cost price of Materail from the Material Master.
My Client requirement is, VPRS Condition type has to be calculated as "Statistical" Contion but IT SHOULD NOT APPEAR IN THE CONDITIONS TAB IN THE SALES ORDER/INQUIRY/CONTRACT.
Thanks,
Bala

hello, friend.
try sapnote 105621. this is about restricting view of condition types (i.e. vprs) in sales orders by creating anauthorization object for cond types..
i wish to discuss our experience with this, as we had the same business requirement.
first, we simply deleted vprs from the PP. this did not affect financial accounting, until the client decided to implement std cost estimates. we had to bring back vprs.
now, we did the sapnote, which required joint efforts among SD, ABAP and BASIS. although we were able to restrict view of vprs in the cond tabs at itm level, this was still visible at header level. also, a resourceful data encoder can always find ways to view the same in, for example, the document flow or materials movement data.
however, try this and maybe you will get it right.
regards.

Discount condition type not appearing in sales order but in invoice

Hi,
I have two discount condition types (MPDI,ZSDI) in my pricing procedure,at the time of sales order creation one discount condition is not appearing.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
In the billing ,i could see the condition type appearing.I have checked this,but i could not understand why it is happening.Even the condition catergory of condition is empty not L.
Also please find the screen shots below,
Pradeep

Pradeep,
Am sure user might have deleted the condition type in sales order, the same condition type woudl have entered manually in invoice.
Please check my testing, i have done the same entered ZA09 manually and after saving have deleted again in sales order, after dilivery and when i created invoice here i have entered manually the same condition type.
So in your case also the same thing could have happend, check the change log and also in invoce condtion tab check the condtion type in analysis ( Invoice analysis not order). so that you can udnerstand whether it was entered manully or not.
On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
This is because in the condtion tyoe the abvoe key combiantion was found with records hence the below key combition was ignored. this you observe in your screen shot with with 5.00
So my guess is the condtion records was deleted in sales order.
thanks,
srinu.

Payment methods do not appear in Sales order

Dear all,
I've a problem with payment methods on my sales order (billing tab): the value list is not activated (is empty) in my sales order type whereas with a standard sales order it works. It seems it is because the field Tax destination country is not determined automatically. The BP used is the same in both cases, so it is not a problem of master data.
I don't know what to change in my customizing as I've compared 2 sales order types and it is the same; For information we don't use neither tax determination nor billing, only pricing.
Many thanks for your help
Marjolaine

I've found the solution: It is necessary to manage ship-to party in partner procedure, this is the role that determines the tax determination country.

Condition type not appearing in Sales order

Hi All,
Iam using TAXINN, Copied ZINFAC to KINFAC,
I have created JIVP and JIVC for VAT and CST,
I have maintained Condition Records for JIVP and JIVC.
Both these condition records are not reflecting in my sales order, i.e. the records are not coming.
Please help me in this regard
Siva Narayana.B

hi,
please check if the condition records are mentioned for the key combination matching the sales order. ie if the condition records are maintained for the required combinations. Then check if the correct tax codes are maintained in the condition record and properly determined at FTXP.
Thanks
Sadhu Kishore

Invoice/billing document Number not appearing on sales order document flow

Dear all,
After saving the sales order invoice when i check in va02 sales order document flow invoice number is not generating

Really something is wrong in your configuration. When your delivery status shows Being Processed, I could see subsequent two documents, viz.Confirmation of Service and GD doc reference as complete.
Can you let me know how many line items that delivery contains? The reason for this query is normally, for stock item, we see Material Document reference and for non-stock item, we see Confirmation of service. But in your case, I could see both. From your VBFA table screen shot, I could see two different material document references.
G. Lakshmipathi

BOM not picking correctly in Sales Order Costing

Hi,
During Sales Order costing of configurable material Say ABC is configurable material(finished material) and it has 4 components. I am using standard sales order costing variant as PPC4. During sales order costing from VA22(quotation) of the material ABC(finished material) system take its first two components during costing. Remaining two components system does not take. It shows correctly BOM usage as 2. But two components are missing during calculation.. What may be reaon or special configuration is required for sales order costing ?
Best Reagrds,
Samrat

Dear,
please check your condition type : Ek02
It is used for statistical posting. If you use this condition type, the result of unit costing is simply a statistical value which you can compare with the price. So, this can be can used instead of VPRS to calculate the profit margin for the assembly item.
Please note the following points:
1) The condition type must have condition category 'Q' (costing).
2) The condition type must agree with the condition type defined for unit costing in the pricing procedure.
So, EK01 & EK02 are the condition type that will display the results of the unit costing for certain type of sales document and can be used in Make To Order scenario.
Sales order cost estimate can be flow to COPA. Where you have to maintain setting in COPA in Define access to Standard cost estimate for costing key select sales order cost estimate.
For transfer SD to COPA you have to use Transaction KE4I here enter SD conditions with COPA Value fields.
So, whether EK01 or EK02, these will determine from Requirement class configuration. Requirement class in turn there is requirement type and requirement type is determined by item category and MRP type when you cost a sales order (valuated/non valuated sales order) at that time when save the cost estimate then the cost value automatically gets populated in your condition tab. Hence, if the item is not relevant to sales order costing then the cost comes from VPRS.
For more details please check below links
http://wiki.sdn.sap.com/wiki/display/ERPLO/VPRS%2C+EK01%28ActualCost%29andEK02%28Calculated+Cost%29
Std Cost Calculation in Sales Order - EK02 and by T-Code CK11N
Thanks,
Ram

Sales order costing is not possible for recursive configurable material

User is creating cost estimate for sales order, where system is throwing above error.
The diagnosis is like below
The system recognized that the BOM structure being costed is a recursive production process in which configurable materials are used. This scenario is not supportive by sales order costing
System resopose
Material XXXX in plant XXXX can not be exploded further.
If anyone has come across such error or knows the solution, please help.
Thanks

Answered

Inventory Valuation based on Sales Order Costing

Dear All
My client requirement is the inventory value should happen based on the "Sales Order Cost Estimate"
Kindly give the configuration steps, if it is possible in SAP
Regards
Anilkumar

Hi rback59,
The information you have provided is very clear and accurate. Thank you. I am hoping that you can assist with a related problem I am facing:
We have sales order costing in place with the Material Ledger and multiple valuation. For financial reporting purposes, we have a legal valuation/local currency variant entered in our requirements class (46) and we are using this to value our sales order stock. The problem we are facing is that the requirements class allows us to enter only one costing variant. This means we are not able to create a cost estimate for our two additional valuation views (group and profit centre). As a result, we are forced to use the material standard price in the material master for the group and profit centre views which is not ideal.
Do you know if there is a way to create cost estimates in all 3 valuation views for a single sales order line item?
Any pointers would be appreciated.
Thanks,
Ross

Plan value(break up) not appearing in sales order cost report

Similar Messages

Maybe you are looking for