Error in "cpio -idcmv Linux_iFS_901_Disk1.cpio"

Hello,
when i use 'cpio -idcmv < Linux_iFS_901_Disk1.cpio' to extact the file, but it shows
'cpio: premature end of file'
I have checked the size of Linux_iFS_901_Disk1.cpio.gz is same with the one shown on the download site. Could anyone tell me why? Is it something wrong in the file of the download site? Thanks!
Regards
Winnie

There appears to be some problem when extracting the file on Red Hat (perhaps on other operating systems as well).
We're reuploading the file. It should be changed by 8pm California time this evening.
Let us know if that doesn't fix the problem.
Alan

Similar Messages

  • Linux_iFS_901_Disk1.cpio.gz

    hello all
    i have a problem with this archive file.
    My download server is download-uk.oracle.com.
    File size is correct: 113,053,132 bytes.
    Gunzip works fine.
    But when i run the cpio command
    cpio -idcmv < Linux_iFS_901_Disk1.cpio
    i have the following error:
    cpio: premature end of file.
    Thanks for help

    download instructions specifiy to use cpio -idcmv but that is wrong. specifically the d option is wrong. the cpio archive does not use the SVR format, it uses the ASCII format. iirc, cpio -icmv will do it, you may need to add -H odc also.
    all of this is if memeory serves...hope it's right.

  • I download lnx_920_disk1.cpio.gz, lnx_920_disk2.cpio.gz & lnx_920_disk3.cpio.gz

    When I try to unzip the files I received the message unexpected end of file, I followed the how to install, is any trick on it???

    Ok, I have it. I download the files sometimes, always same error appear, (not end of file found or someting like that), I decided use just NT, I download cpio and gzip(gunzip come with it) for NT and last try, I download Getright too, I use Getright to download the files, next I ran "gunzip gunzip Linux9i_DiskX.cpio.gz", next I ran "cpio -idmv -I Linux9i_DiskX.cpio", well in my Windows 2k, it work fine, my next steps are burn a CD and install it on linux, I will try it tonight, I hope it finish well for me and for all you, Thanks to all and be luck too.
    Henry Gomez N.

  • Error on iFS download file instructions

    On http://otn.oracle.com/software/products/ifs/htdocs/linuxsoft.html:
    Oracle Internet File System, Release 9.0.1 for Linux (Intel)
    Download Internet File System for Linux
    Linux_iFS_901_Disk1.cpio.gz (113,053,132 bytes)
    Directions
    To extract the file do the following : gunzip Linux_iFS_901_Disk1.cpio.gz
    then: cpio -idcmv < Linux_iFS_901_Disk1.cpio
    The instructions say cpio -idcmv. It should be cpio - idmv

    I haven't seen that error, but the download manager does produce two files, one .exe and another. The .exe uses the second file during the installation.
    Usually the files are either in your browser's \Download folder or on your desktop.
    However -- I haven't been able to get the download manager to work in Firefox or Chrome -- it's only worked for me under IE. So you may want to try with IE too.
    Also, Adobe doees provide free install support; may be worth a call to see if they have thoughts....

  • The CPIO files return error

    I don't know what may be the problem, but i'm trying to download the Oracle 9i for HP-UX and i cannot use the CPIO files.
    When i use the command:
    cpio -idcmv <file.disk1.cpio>
    the system does not return any error and don't do anything. The cursor stay bliking in the next line.
    I've try to run this with normal user and root.
    I've try to cpio the file in windows. I've download the cpio command for windows and try do run the same command and i get the message:
    cpio: standard input is closed: Bad file descriptor
    Any one can help me?? How can I resolve this problem?
    Paulo Aboim Pinto
    Amadora - Porgual
    http://www.dsts.pt

    Sorry about the POST ... the error was mine.
    The correct sintaxe of the cpio is:
    # cpio -idcmv < file.cpio
    sorry about the post

  • Server_9201_hpunix64_disk1.cpio.gz may be corrupted, please fix it

    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name
    - Filename: server_9201_hpunix64_disk1.cpio.gz
    - Date/Time: Jul 13,2002
    - Browser + Version: netscape communicator 4.75
    - O/S + Version: hp-ux 11.11
    - Error Msg
    after download,
    1. run "gunzip server_9201_hpunix64_disk1.cpio.gz"
    error:
    gunzip: server_9201_hpunix64_disk1.cpio.gz: invalid compressed data--format violated
    2. run "cpio -idcmv <server_9201_hpunix64_disk1.cpio.gz"
    error:
    Out of phase--get help
    Perhaps the "-c" option shouldn't be used
    3. run "cpio -idmv <server_9201_hpunix64_disk1.cpio.gz"
    error:
    Out of phase--get help
    Perhaps the "-c" option should be used

    Frank: This procedure (with some variations required for my environment) worked
    perfectly. Thank you very much.
    To other readers: The procedure works, but it is a loaded gun. Be careful and methodical.
    The specifics of my situation, which I offer as additional information, are:
    Windows Server 2003 R2 Standard Edition SP2 with all updates.
    One server, 20 clients; of course the server is the domain controller.
    I suggest running the command prompt window at an elevated security level ("run as:", followed by unchecking the "restricted" box).
    I also suggest changing directories to C:\WINNT\NTDS or C:\WINDOWS\NTDS, as appropriate.
    Variations:
    The location of the NTDS folder is C:\WINDOWS\NTDS for an install that is not an upgrade from Server 2000.
    Step 9 -- the parameters for ESENTUTL are different. For the integrity check I used "ESENTUTL /g NTDS.DIT /8" as the other parameters are not available.
    Also in step 9 -- For the repair step that was required I used "ESENTUTL /p NTDS.DIT /8". There was a window warning of a possible data loss, which clicking OK cleared.
    Step 11 -- NTDSUTIL FILES INTEGRITY works properly without change. However, the Semantic Database Analysis check cannot be run in a single command. I used "NTDSUTIL SEMANTIC DATABASE ANALYSIS" followed by "GO" at the next prompt. The database analysis does
    not report a positive result, but if there is no warning the database passes the analysis. To be certain I ran the "GO FIX" step anyway, which gave identical output.
    After this procedure the system started perfectly. I recommend this procedure as the answer to the problem.
      -- E. R. Quinones

  • How to extract cpio file ?

    Hi all,
    We are trying to install application server and download file is .cpio file. How do we extract this file. I have tried the following command and its just hanging.
    cpio -i (Filename)
    cpio -idmv (file_name)
    cpio -idcmv (filename)
    cpio -Hhpodc -idmv (file_name)
    none of above commands are working.
    Please advise.
    Thanks a bunch in advance.

    Actually I tried the command cpio -idmv <file_name>I somehow doubt you tried that exact string. Perhaps you tried
    cpio -idmv somefile.cpio
    In which case it would appear to hang, but in reality it would be waiting for input from standard in. The other posters correctly stated you should use
    cpio -idmv < somefile.cpio
    which means "run the cpio command with options idmv and take input from the somefile.cpio in place of default standard input device."
    Note that in Linux and Unix shells, the triangle brackets have meaning.

  • Oracle 9i Linux installation cpio problem

    While using cpio to unpack the 9i installation files for Linux I get "cpio: premature end of file" This only happens on the first file "lnx_920_disk1.cpio". The other files unpack fine.
    I am using the following:
    - Redhat 7.3 kernel 2.4.18-24.7
    - GNU cpio version 2.4.2
    - "Oracle9i Database Release 2 Enterprise/Standard Edition for Linux" from http://otn.oracle.com/software/products/oracle9i/content.html
    I have scoured the internet and found the following suggestions (none of them work):
    cpio -icdcmv < lnx_920_disk1.cpio
    cpio -idmv < lnx_920_disk1.cpio
    cpio -idcmv <lnx_920_disk1.cpio
    cpio -icdcmvB <lnx_920_disk1.cpio
    cpio -idmv -I lnx_920_disk1.cpio
    cpio -idmv -H new < clnx_920_disk1.cpio
    cpio -idmv -H odc < lnx_920_disk1.cpio
    cpio -idmv -H crc < lnx_920_disk1.cpio
    cat lnx_920_disk1.cpio | cpio -idvm
    I have tried all the -H formats!
    What is going on? Why is this only a problem in the first archive file "lnx_920_disk1.cpio"? Even just listing the files out using cpio does not help.
    A great many people seem to be having this problem.
    -Brent

    When you have the cpio.gz files you must first unzip each of them.
    I.e. for each file run "gzip -d <file name>.cpio.gz and when it's finished run "cat <file name>.cpio | cpio -icd" (or "cat <file name>.cpio | cpio -id").
    Hope this helps
    -Thomas

  • How to unzip cpio extention file

    Hi All,
    I am trying to install Oracle 9.2.0.4 on linux so i downloaded oracle software but not able to extract this files on linux
    i tried with this command
    1. gunzip ship_9204_linux_disk1.cpio.gz------------I extracted this file to cpio
    2. cpio -idmv <ship_9204_linux_disk1.cpio --------I am not able to extract this file (i.e.system is hanging )
    can any body help in this
    Thanks in Advance
    Praveen

    Pasting Oracle support solution (ID 458985.1), hope this helps ....
    Unable to use cpio to uncompress the 10gr2_aix5l64_client.cpio install media
    Using:
    cpio -idcmv 10gr2_aix5l64_client.cpio
    This hangs.
    -- Steps To Reproduce:
    cpio -idcmv 10gr2_aix5l64_client.cpio
    Cause
    Incorrect Syntax:
    cpio -idcmv 10gr2_aix5l64_client.cpio
    Correct Syntax:
    cpio -idcmv < 10gr2_aix5l64_client.cpio
    The cpio command must be fed the correct file name with a file redirect using "<".
    Solution
    -- To implement the solution, please execute the following steps::
    Please issue:
    cpio -idcmv < 10gr2_aix.cpio
    This should work to uncompress the cpio file.

  • Lnx390_db_9201_Disk1.cpio cpio: premature end of file

    I have downloaded
    -rw-r--r-- 1 mbrooker 440724391 2003-10-14 03:57 lnx390_db_9201_Disk1.cpio.gz
    -rw-r--r-- 1 mbrooker 616447271 2003-10-14 04:03 lnx390_db_9201_Disk2.cpio.gz
    gunzipped them:
    $ gunzip lnx390_db_9201_Disk1.cpio.gz
    $ gunzip lnx390_db_9201_Disk2.cpio.gz
    but cpio doesn't like either:
    $ cpio -idcmv < lnx390_db_9201_Disk1.cpio
    cpio: premature end of file
    $ cpio -idcmv < lnx390_db_9201_Disk2.cpio
    cpio: premature end of file
    The extraction instructions are WRONG. These archives are of type:
    $ file *
    lnx390_db_9201_Disk1.cpio: ASCII cpio archive (pre-SVR4 or odc)
    lnx390_db_9201_Disk2.cpio: ASCII cpio archive (pre-SVR4 or odc)
    so the correct way to extract them is
    $ cpio -idmv lnx390_db_9201_Disk1.cpio
    $ cpio -idmv lnx390_db_9201_Disk2.cpio
    Please correct the instructions on the download page.

    You are correct, its working now. but now i am stuck up with
    $/ora01/oracle920/Disk1/runInstaller then i got
    /ora01/oracle920/Disk1/runInstaller: ./runInstaller: cannot execute binary file
    Is this related to dos to unix conversion or some thing else!!
    Thanks.

  • Install Oracle 9i on Linux

    Hi,
    I downloaded the source from oracle OTN site and did :
    1.      Uncompress the file using "gunzip". Eg.: "gunzip amd64_db_9204_Disk1.cpio.gz"
    2.      Extract the file resulting from the step above using "cpio". Eg.: "cpio -idcmv < amd64_db_9204_Disk1.cpio"
    and now I have the followin files :
    amd64_db_9204_Disk1.cpio
    amd64_db_9204_Disk2.cpio
    amd64_db_9204_Disk3.cpio
    How should I continu in order to install Oracle ?
    Thank for help.

    sorry,
    I need your help again :
    oracle@ak-xubuntu:/u0/ORACLE/Disk1$ ./runInstaller
    ./runInstaller: 62: Syntax error: word unexpected (expecting ")")
    oracle@ak-xubuntu:/u0/ORACLE/Disk1$ runInstaller
    ./runInstaller: 62: Syntax error: word unexpected (expecting ")")Thank you.

  • How to extract the downloaded files for AS 10.1.2.0.2 Solaris?

    Hi,
    When I try to extract the downloaded files from OTN, the following error occurs?
    # cpio -idcmv < as_sun_sparc_101202_disk1.cpio
    cpio: Can't read input: end of file encountered prior to expected end of archi.
    Regards,
    Kitae

    It brings the same error message.
    Are these files fine?Probably your files are broken because of interrupted or incomplete download.

  • AIX 9.0.1 archives seem to be corrupt?

    I am trying to download/install 9.0.1 for AIX, and am having trouble extracting the archives. I download the *.cpio.gz files fine, and i can extract the *.cpio archives without a problem.
    When I attempt to extract files from within the cpio archive I see one of two outcomes:
    - on Windows (was going to make CDs) using TUGZip or 7-zip, I get an 'unspecified error' message. No other info, just fails.
    - If I ftp to AIX or Linux and run cpio -idcmv <filename.cpio>, cpio just sits there. No extracted files, no errors, no io, no cpu cycles spent.
    What is the problem here? I need to be able to get this installed to address a bug in 9.2, and this is killing me.
    Thanks in advance.
    Bob Blizard

    - If I ftp to AIX or Linux and run cpio -idcmv
    <filename.cpio>, cpio just sits there. No extracted
    files, no errors, no io, no cpu cycles spent.There seems to be an error in your command line, try:
    cat filename.cpio|cpio -idcmv
    or
    cpio -idcmv < filename.cpio
    It should dissolve with either of the above command lines.

  • How to start single box installation

    Hi
    I've downloaded the 3 files for linux single box instalation(9.0.4.1), but I have problems to continue with installation, I hava an error that say that he cannot find .rsp files por storage/midtie/infra
    I think I'm making something wrong uncompressing the .cpio files, because i get a lot of directories with a Disk1 label. Somebody knows the correct way to do it ? I've followed de otn directions and didn't work:
    - gzip -d [all 3 files]
    - cpio -idcmv < ocs_9041_onebox_lnx_file1.cpio.gz
    - chmod +w Disk1
    - cd Disk1
    - cpio -idcmv < ocs_9041_onebox_lnx_file2.cpio.gz
    - cpio -idcmv < ocs_9041_onebox_lnx_file3.cpio.gz
    THanks !

    I am getting the same problem when trying to install. It keeps looking for the files relative to the root directory /onebox/ instead of the directory the rsp files are located in which is /somepath/onebox/Disk1/install/linux. From my install log file I see the problem but am not sure how to fix it. The source and destination paths are being set wrong.
    Starting install Install Phase 1 of component Oracle Collaboration Suite Single-box Install
    Calling Action fileActions2.3.0.8.0 instantiateFile
    selectedNodes = null
    source = /onebox/onebox_stg.rsp
    destination = /onebox/onebox_stg.rsp
    variables = null

  • Corrupt release of HPUX GridControl Mass agent?

    I'm downloading the HPUX64_Grid_Control_agentdownload_10_1_0_3_Disk1 from this page: http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html
    The checksum is fine but when trying to cpio the file on our Gridcontrol-machine I'm getting the error:
    cpio -idcmv < HPUX64_Grid_Control_agentdownload_10_1_0_3_Disk1.cpio
    cpio: premature end of file
    Is the release corrupt?

    Hi,
    This was tested out by the product team and appears to be a valid file that was extracted properly. Not sure what could be your issue here.. can you give some details about the environment?
    OTN

Maybe you are looking for

  • Confirmation of 2 Services for a Service PO

    Hi All, We are using SRM 3.0, EBP 4.0 ECS. We create a Service PO in SRM and have 2 Services (items) for the Service PO. While doing confirmation in SRM both the services are available. If we confirm one Service (item) for the full quantity and then

  • Poll service  is unavailable

    Hi, I wanted to create Poll using webcenter portal using Poll service .For that I have followed following steps in development environment : 1-In the application Navigation right click the connection Folder 2-Select new connection and select Database

  • Type casting in OOPS ABAP

    Hi Team,              Could any one explain me about Type casting used in oops abap and in what circumstances it is used with an example. Regards, Pradeep P.

  • Array of Tab Control page names

    Hi, I wish to programatically create an array of the names of the pages within a Tab Control. See the attached VI for my attempt at this. It works, but as it runs it changes which page is displayed on the front panel. Is there a way to do this withou

  • NUM-EXP DOES NOT WORK

    hi good day I have configured a num-exp however I see that are not working properly ie the call does not end at ext indicated that tagging tries to send the last dialed numbers call his voice brief  I see the term 8100 call and tries to look at the C