Error in CREATE_DRAFT_FINPLAN Plan Type: Approved Cost Budget. Before you c

I am getting below error when I call "pa_budget_pub.CREATE_DRAFT_FINPLAN"
api to create a COST budge
do I need to call any other API to create PLAN_TYPE.
pls. help me if anybody has an idea
Project: 60040107; Plan Type: Approved Cost Budget. Before you can create a plan version for the plan type, you must add the plan type to the project.

Can you add the plan type in the project or template? That would be better than an API call.
These need to run to perform a budget upload...
- pa_interface_utils_pub.set_global_info
- pa_budget_pub.init_budget
- pa_budget_pub.create_draft_budget
- pa_budget_pub.baseline_budget
- pa_budget_pub.clear_budget

Similar Messages

  • Printing PO error "Maintain billing plan type in sales document type...

    Hi,
    I am trying to print SAPscript to pdf using ADOBE_ENTRY_NEU routine and when i try to display output from ME9F, i get an error that says "Maintain billing plan type in sales document type or Item Category"
    anyone have any clue why this is happening?

    As this is about SAPscript, moved it to ABAP Programming forum

  • I have an error message reading "Iphone needs to cool down before you can use it". ?

    I can only use the phone for maybe 4 minutes before this message appears with a yellow warning triangle. (Iphone 4S)
    "Iphone needs to cool down before you can use it"
    The phone is not warm and after a couple of minutes it is useable again only to repeat the same message a few minutes later.
    I've done a restore which made no difference.
    Anyone have any ideas/similar problem?
    Cheers

    iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures

  • Use of 'Cost Budget - Needs Approval' Budget Type? Change of Status?

    Hi Experts
    Could you please explain me whats the use of budget type 'Cost Budget - Needs Approval' ? And is it possible to use workflow to change this to 'Approved Cost Budget' after due approval?
    Requirement is to create a initial draft budget which is yet to be approved, so at this time the budget type required is 'Cost Budget - Needs Approval'. Once this is submitted for approval and approved theh this should be shown as 'Approved Cost Budget'.
    Please let me know if this is achievable and how?
    Thanks & Regards

    Hi,
    Budget types are mainly used to classify your Project budgets, there can be different types of budgets for your project cost and Project Bill. The Cost Budget type is designed in such a way to keep a track of your expenses with some pre-estimation of your Project expenditures.
    Whatever you create initially, This can be treated as Initial draft budget, once after the manager approves the budget then the status changes to "baselined" there is a field to enter the description, where you can give the case as Intial draft budget or Approved draft budget or you can use the Version name for the case, "Version 0" is the Intial draft budget and "Version 1" is the approved cost budget.
    but functionally, for one project cost budget there cannot be two different budget types.
    Lavanya

  • How to add a new payment plan type

    I want to define a crm sales order. In customizing process, I want to add the new item in payment plan type field, but I don't find the customizing route . Where is it to find ? Thanks.

    Nice question ,
    The field payment plan is part of the payment card processing in SAPCRM  . The menu path is CRM-Basic functions-PAYMENT cards - Assign Payment plan type to Transaction. If you want to have new fields then BADIs are available .
    Definition is COM_PAYPLAN_BADI
    Reward points if this helps
    Thanks
    Surya
    Message was edited by: Surya Kuchibhotla

  • Converting Cost Budget From Plan level Type to Project Level

    Hi There ,
    I am Working on Project Accounting in Oracle apps .Perviously we used to create projects using oracle forms now we have created the OA pages for the same and using them to create the projects .
    Thus Cost budget done by using forms will be at project level and Cost Budget done through OA pages is at PLAN TYPE .
    And my problem is , I want to convert PLAN TYPE cost budget to PROJECT LEVEL cost budget. Do any body know how to do it , I know that we can convert project level to plan type by running one request , is there any such request to solve my problem.
    Please help me
    Thanks

    Zafar,
    What exactly ur looking for, can u explain in oaf terms, as this is a oaf forum.
    --Mukul                                                                                                                                                                                                                                                                                       

  • Tax code error while posting Planned delivery costs in Import Scenario

    Hi!!!!!
    I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
    "Tax code V0 country IN does not exist in procedure ZAXINN"
    For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
    While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
    Please let me know what config is missing.
    Regards,
    Durga

    Is you ZAXINN assigned to the country India
    and is your taxcode (created in FTXP) created for country India?
    kr
    hakan

  • Is it possible to create financial plan for cost budget when ?

    Hello Experts,
    I am in situation where customer is currently using budgetory control enabled features and creating / maintaining cost budgets using oracle Form based budgets. Now after using for so many years, suddenly they choose not to use it. Instead they want financial plans to use for cost and revenue budgeting.
    When We have run UPG : Upgrade budget type process it results into no data found and cannot able to help me in upgrading financial plan.
    I think if the budgetory control is enable then we must need to create the cost budgets using Oracle Smart Forms. Am I rght?
    If I am right then what would be work around? As I cannot ask them to create a new project & close exsting project because lots of PO & REQ are still open.
    Lets say though they wanted to closed those PO & REQ and wanted to disabled budgetory control option on project they must need to diasable encumbrance acconting from Ledger. In that case what would be the overall impact? And what is gurantee whether system allow them to updgrade the budget to financial plan?
    Has someone trapped and escaped from such kind of situation ever before?
    Please help...
    Thanks
    :-)

    Hi Dina,
    The patch is nothing doing great but disabling the flag from the table which in turns enabling the budget types to be upgraded to financial plans very smoothly. Once updgraded, the budgets values are easily available in financial plans for reporting and further processing.
    In this org, Customer is not using budgetory control functionality but in another org they are using it.
    What I have learn in this situation is had it been all the budget types been upgraded first and later use in budgetory control, this situation would not have been arrived.
    Thanks
    :-)

  • ECM Plan with no budget, planning, or approval for hourly union employees

    We are implementing Enterprise Compensation Management at my company.  We are on 6.0 Ehp5.  One of our requirements is for a General Increase Plan (Salary Adjustment) for union employees.  There is no approval process for this plan.  Once top leadership has approved the increase (outside of SAP) every eligible employeeu2019s base pay is increased by the same percentage.  Also, this group of employees has fixed pay per job.  We use table T510 to store their pay scales and levels.  So we normally increase the values in T510 by the approved percentage and then create new IT0008 via mass upload. 
    Since we are implementing ECM and want this plan to be administered through ECM, my question is about how that should work.  I was thinking that we would use PECM_CREATE_COMP_PRO to create the Compensation Process record and bring to the minimum.  I am not sure if this transaction looks at T510 or just T710 or the Planned Compensation (HRP1005).  I assume we would then use PECM_CHANGE_STATUS to change the status to u201CApprovedu201D (not sure if the IT0759 has to be in Appoved status before being activated).  Lastly we would use PECM_CHANGE_STATUS to Activate the Compensation Process infotypes.  Does this sound like the way to handle a plan where every eligible employee gets the same % increase or do you know of a best practice you could share?

    Hi Vishal,
    Nice to see your reply, i am having SAP_ALL permissions in the backend system, my user id was attached to employee, that employee is top level manager, i am able to see employees successfully in MSS 600 Compensation Approval WebDynpro JAVA application for Approval and Rejection, but i am not able to see employeed in MSS 604 (EHP4) Review Planning(Compensation Approval) WebDynpro ABAP application.
    When i am trying to execute that application even i am not able to see any errors, the screen looks fine, only in the table it displays " table does not contain data"
    If you have any idea please help me on this one.
    Thanks in Advance.
    Regards,
    Babu.

  • Error validating business rules containing variable from another plan type.

    We have created few business rules in in plan type "Plan1" which we are using variable from plan type "Capex". This is how we are using it.
    "(@XREF(cpx,"Intangible Assets Finite, Gross","Unspecified","No Project","Information Technology (IT)","371064911-01"))"
    But when we validate this rule it gives the following error
    "An error occurred in: Rule:IFLJAN13.Plan1.B - Trail Balance - Capex
    A validation error was received from the Planning server 'http://hptstorg:8300/HyperionPlanning/servlet/HspAppManagerServlet?appname=IFLJAN13'.
    'Error:The member 'Unspecified' cannot be found.
    The member 'Unspecified' cannot be found.
    The member 'Intangible Assets' cannot be found.
    The member 'Unspecified' cannot be found.
    The member 'Unspecified' cannot be found. Rule IFLJAN13.Plan1.B - Trail Balance - Capex'."
    We have checked the location aliases using EAS Console and they are correct.

    Could you pls. check if you can see your BR in the location for the cube where you are unable to validate the rule?! (EAS console --> Administration --> Locations --> (right click) open)
    your user must be able to "validate or launch" the rule in this location (changeable with "Add Access Privileges") and the rule itself must be able to launch in this location (changeable with "Add rules").
    Kind regards
    André

  • Conversion for plan type budgets / Forecast from Project Management

    We are doing Conversion of projects from oracle old version 11.5.10 to 12.2.3, client is using  Project management based budgets and forecast.
    I are aware there are API to migrate budgets and forecast created in project costing module but unable to find any API for migrating budgets created in Project management Responsibility.
    Can even one help me out to know the process how to perform conversion of Project management based budgets and forecast. as I am helpless and don't find any way to move further.
    I highly Appreciate if you can help me in this regards.
    Thanks,
    Mohammed

    Hello,
    I found a way to approve the budget costs and revenues using the PA Budget workflow. In order to kick off this workflow I still have to submit the budget costs or revenue. Is there anyway I can by pass this submission process? Is there an api I can use to submit the latest budget costs so it will kick off the workflow?
    Thanks
    -Nelly

  • Error in MIR7 - Different Material Vendor  planned for del. costs item in PO

    Dear All,
    We getting error during MIR7.
    We add two freight condtion ZFRO and ZFRT in purchase order  as below :
    ZFRO = we have add Rs. 350 against freight to Vendor(MATERIAL VENDOR)
    ZFRT =  We have add Rs. 100 for local freight which is paid to FREIGHT VENDOR directly (cash payment) i.e. paid for Transporter's Godown to our factory.
    Now during MIGO, store department has enter  as :
    1. ZFRT (Freight Vendor - FREIGHT VENDOR)
    2. ZFRO (Freight Vendor - MATERIAL VENDOR)
    Now during MIR7 we are getting following error :
    Different Material Vendor 300255 planned for del. costs item in PO 4500028018
    (300255 is FREIGHT VENDOR which is at Number 1 in freight tab of MIGO)
    Thanks and Regards,
    Nirav

    For good and service,
    In MIR7, select the option Goods/Service Item
    First do only for Good/Service item...
    After that, in MIR7 select only Planned Delivery cost and give the same PO number..
    Then you will receive a pop-up message to choose vendor..
    Here select one vendor and press continue..
    Then save you invoice..
    And again do the same and just select the other vendor..
    You can see 3 invoice number in PO history..
    One for goods charges and another two for freight charges..

  • Error regarding plan type in hyperion planning

    Hi,
    I have created a hyperion planning application with 2 plan types namely Plan1 and Plan2.
    Initially i designed my every dimension members in Plan1 alone. Product dimension (User defined dimension) is alone  in both the plan type.
    Now if i go to the edit properties of all other dimensions except my user defined dimension i could not enable the Plan2 in the plan type.
    Can anyone give me suggestions to enable the Plan2 for other dimensions.

    Hi ,
    You cannot modify in front end if you deployed your application already. You can enable if you have Workforce or Capex cube created in you application.
    you cant do it for for the normal cube (Plan1, Plan2, Plan3).
    Regards,
    Vikram.

  • Can a Financial Plan Type be attached to more than one Project Template

    We are working on Project Accounting through Self Service pages. For doing the Cost Budget we have created a Financial Plan Type. We attached it to a Time & Material Project. But later when we tried attaching it one more template, a Turnkey Template, it does not give us the Cost Budget-Financial Plan type in the drop down box.
    Hence, wanted to know whether we can attach a Financial Plan Type to more than one Project Template??? If yes, then why didnt we get the option in the drop down box?
    Chirag..

    Since you are not using Company code as the branch, and are using Profit centre as the branch, I dont think its right for you to set a default profit centre for any GL account in the Chart of Account for that company.
    all the SAP user in the company will be using the same company code to post, and thus, will be using exactly the same inventory account, if you set a default profit centre there, no point rite? You will need to implement a procedure to ask all the user to manually assign the profit centre during posting. Just like how we normally ask user to specify the company code before posting.
    The authorisation should be set by profit centre as well. hope this helps. Thanks.

  • Error occurred in accounting - check the costing in the ERP system

    Hi Experts,
    i am experiencing error in cproject preliminary costing. please refer below error.
    i have the choosed the costing variant as ad hoc cost estimation in controlling for easy cost planning. i need to create a quotation from cproject.
    Please sugeest me what is missing?
    thanks in advance,
    Prabu
    Error occurred in accounting - check the costing in the ERP system
    Message no. DPR_FIN_GECCO026
    Diagnosis
    Errors occurred in costing in the ERP system.
    Procedure
    Check the costing log for costing in the ERP system:
    Call costing:
    If it is preliminary costing, the hyperlink for calling the ad hoc cost estimate can be found in the Costing view.
    If it is costing for an account assignment object (after transfer), the hyperlink for calling Easy Cost Planning can be found in the Services view.
    In costing, choose Revaluate All Items. The costing log is then generated with the error messages.
    Procedure for System Administration
    This message has the number DPR_FIN_GECCO026.

    Hi,
    Check the configuration.
    Create and Change Controlling Scenario
    Define Controlling Scenario
    Settings for Easy Cost Planning
    Assign Cost Elements and Activity Types
    Regards
    Ravindra

Maybe you are looking for