Error in create tablespace statement

Hello
I'm try create a tablespace in oracle 10g r2 database, but this don't support the unlimited parameters. It's true?
See the statement:
SQL> CREATE TABLESPACE "DESENV"
LOGGING
DATAFILE 'c:\dados\basesoracle\orcl10g\desenv.ora' SIZE 2700M REUSE
AUTOEXTEND ON
NEXT 50M
UNLIMITED
EXTENT MANAGEMENT LOCAL
SEGMENT SPACE MANAGEMENT AUTO
UNLIMITED
ERROR at line 6:
ORA-02180: invalid option for CREATE TABLESPACE

My old version was oracle8i. He's support this s "unlimited".
This mean not define a limit alocation space in disk to database file.

Similar Messages

Error in creating tablespaces

hi,
I have installed oracle9i in HP-USserver.its installed successfully.
I ahve created the instance too with datafiles.but the problem is that due to shortage of disk space,iam unable to store datas.so i have dropped the tablespaces and tried to create to a new file system (in the sense a new hard drive) in the same server.while creating the tablespaces alone in a different path its
showing error as
SQL*Plus: Release 9.2.0.2.0 - Production on Sat Jul 28 13:18:44 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter user-name: sys as sysdbas
Enter password:
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.2.0 - Production
SQL> CREATE TABLESPACE DATAXML
2 LOGGING DATAFILE
3 '/server47/Bankareas/CFC/oracledatafiles/globusdataxml01.dbf' SIZE 2048M AUTOEXTEND ON MAXSIZE UNLIMITED,
4 '/server47/Bankareas/CFC/oracledatafiles/globusdataxml02.dbf' SIZE 2048M AUTOEXTEND ON MAXSIZE UNLIMITED,
5 '/server47/Bankareas/CFC/oracledatafiles/globusdataxml03.dbf' SIZE 2048M AUTOEXTEND ON MAXSIZE UNLIMITED
6 EXTENT MANAGEMENT LOCAL
7 SEGMENT SPACE MANAGEMENT AUTO;
CREATE TABLESPACE DATAXML
ERROR at line 1:
ORA-01119: error in creating database file
'/server47/Bankareas/CFC/oracledatafiles/globusdataxml01.dbf'
ORA-27086: skgfglk: unable to lock file - already in use
HPUX-ia64 Error: 13: Permission denied
Additional information: 8
i want to know whether the tablespaces can be created in a seperate path apart from where oracle is installed?
anything to be exported??
can anybody please help me out in solving this problem.
thanks in advance ,
Ratheesh

You state you have dropped the tablespace (which does not necessarily automatically drop the datafiles in version 9i); and
You state you are trying to locate the tablespace's datafiles in a new file system where no files should exist.
Please post response to
ls -ld /server47/Bankareas/CFC/oracledatafiles
ls -l /server47/Bankareas/CFC/oracledatafiles/globusdataxml01.dbf

Error in creating tablespace

Machine has the following configuration,
Oracle 10g 10.2.0
Solaris 10
Sparc v9-64 bit
I have mounted NAS(Network attached Storage) device on solaris using NFS file system. The device has been mounted using sharity software.
The problem is that when i execute the following command in sqlplus,
create tablespace test datafile '/storage/test.dbf' size 1m autoextend on
(/storage is the mount point for NAS device)
then i get the following error message
ORA-01119: error in creating database file '/storage/test.dbf'
ORA-27054: NFS file system where the file is created or resides is not mounted with correct options.
Additional Information:2

this is the document
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b15660/app_nas.htm#BCFEAHIC
and this will help either
10gR2 "database backup" to nfs mounted dir results in ORA-27054 NFS error

30EA3 - multiple errors in "Create Tablespace" dialog box

I have noticed the following errors in the "Create Tablespace" dialog box (in the DBA view).
1) In the "File Specifications" tab, if you try to use a period in the file name (for example "data01.dbf") , you get an error message "Validation Failed: Name DATA01.DBF contains an illegal character."
2) The tool is automatically changing the case of the file name to all upper case. You can work around this by enclosing the file name in quotes, but you shouldn't have to do that.
Overall, I've been real happy with the product, and that Oracle keeps improving it.

I've also run into this, recently, in version 3 on Windows 7 (db is version 10g on Solaris 10/SPARC64). Although the error message is now "Name TABLESPACENAME.DBF contains an illegal character." Also found the described capitalization overriding what user types in.

Runtime Error while creating FINANCIAL STATEMENT VERSION

Hi Experts,
The major concern of the problem is related with the new creation of FINANCIAL STATEMENT VERSION.
(SPRO --> IMG --> Financial Accounting --> General Ledger Accounting --> Business Transactinons --> Closing > Document> Define Financial Statement Versions.)
My quries is that is it possiable to maintain more then one FSV for the same company code or for same chart of account.
If yes then we are trying to do it . But the problem reflect, be the indication that we can`t maintain more then one code.
Its giving an runtime error
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Except.                CX_SY_OPEN_SQL_DB
Date and Time          15.03.2008 18:36:04
Short text
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLFAGL_FSV" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
      in
procedure "FSV_TEXTS_CONVERT" "(FORM)", nor was it propagated by a RAISING
      clause.
Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     If you use an ABAP/4 Open SQL array insert to insert a record in
     the database and that record already exists with the same key,
     this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
     situation, processing does not terminate, but SY-SUBRC is set to 4.)
We are trying Its giving an abap dump
Rest the technicall aspect that is comming in ABAP Dump i am not
getting.....so pls inquire according to yourself.
Kind Regards,
Sudhanshu

Hello
Logically speaking, a company code can have more than one FSV as long as they share the same chart of accounts.
When COA is common, the FSV pattern can be designed seperatly to serve the purpose of varied reporting.
The dump you are getting is a temporary snag. Take a screen shot from SM54 after you execute the report and pass it to BASIS for analysis. They would fix that.
Reg
assign points if useful

Oracle10g Import:ORA-01119: error in creating database

I am trying to Import a Oracle10g dump into a Oracle 10g db server(SunOS).The server has enough space and so do the tablespace.
This is the import command i'm trying:
imp db/db@sid file=file.dmp ignore=y full=y
But it still posts the following error:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
Warning: the objects were exported by OPS$QZORA, not by you
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export client uses UTF8 character set (possible charset conversion)
. importing SYSTEM's objects into SYSTEM
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE TABLESPACE "NEW" BLOCKSIZE 8192 DATAFILE '/home/NEW01.d"
"bf' SIZE 2000M , '/home/NEW02.dbf' SIZE 3000M , '/u03/bm"
"qzdb/NEW03.dbf' SIZE 2000M , '/u03/bmqzdb/NEW04.dbf' SIZE 3000M "
" , '/home/NEW05.dbf' SIZE 2000M , '/home/NEW06.d"
"bf' SIZE 5900M , '/home/NEW07.dbf' SIZE 943718400 , '/u0"
"1/bmqzdb/NEW08.dbf' SIZE 734003200 , '/home/NEW09.dbf' SIZ"
"E 144703488 , '/home/NEW10.dbf' SIZE 144703488 , '/u01/b"
"mqzdb/NEW11.dbf' SIZE 81788928 , '/home/NEW12.dbf' SIZE 15"
"00M AUTOEXTEND ON NEXT 8192 MAXSIZE 2000M, '/home/NEW13.dbf"
"' SIZE 1048576000 AUTOEXTEND ON NEXT 8192 MAXSIZE 2000M EXTENT MANAG"
"EMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMENT AUTO"
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file '/home/NEW01.dbf'
ORA-27040: file create error, unable to create file
SVR4 Error: 2: No such file or directory
IMP-00000: Import terminated unsuccessfully

Actually i dont want that to create any tablespaces.I have a tablespace created on my db.In fact i dont have the same (/home) path on my unix server.
I want the imp utility to ignore create tablespace command.I did give the IGNORE=Y on the imp command.
If i give fromuser,touser i can import but that does not go along with full=y.I have to do it table by table.It has also got sequences,types,synonyms etc
thanks in advance
shiva

Create tablespace in Oracle 10g Express

Hi,
I've been playing around over the last few days with Oracle 10g Express and I need to create my own tablespace and therefore create user associated with my custom table space.
I tried with the command create tablespace, but I am not successful with configuring the parameters such as the datafile location and such. I did go through the Oracle Concepts Guide which was very helpful, but I must be missing something.
Also assuming that my db scheme will be part of my application and therefore released to my client as script so they can re-create my database how would the table space integration work on their end.
I would I have to place my first line of the script to create the table space and ask them for database file location?
Any advice will be appreciated.
Thank you in advance.

user12359577 wrote:
The reason why I think I should create my own tablespace is because I am creating a database scheme and thus I think it is appropriate to place my db scheme in its own tablespace instead of simply using the Users tablespace default.
This is my command:
create tablespace MYTBLSPACE;
Error:
Error starting at line 1 in command:
create tablespace MYTBLSPACE
Error at Command Line:1 Column:32
Error report:
SQL Error: ORA-02199: missing DATAFILE/TEMPFILE clause
02199. 00000 - "missing DATAFILE/TEMPFILE clause"
*Cause: A CREATE TABLESPACE statement has no DATAFILE/TEMPFILE clause.
*Action: Specify a DATAFILE/TEMPFILE clause.
I am also not sure how to specify the datafile.
Thank you.How about checking with the fine SQL Reference manual for the syntax of the CREATE TABLESPACE command?
Learning where to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com. Drill down to your product and version.
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
Edited by: EdStevens on Mar 3, 2010 10:13 AM
Edited by: EdStevens on Mar 3, 2010 10:15 AM

Import database from Linux to Windows fails with creating tablespaces

Using (Oracle10g/Linux) user/schema (i think)"Sys" i exported succesfully full database and produced a log file which looks like this:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export done in UTF8 character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)
Note: table data (rows) will not be exported
About to export the entire database ...
exporting tablespace definitions
exporting profiles
exporting user definitions
exporting roles
exporting resource costs
exporting rollback segment definitions
exporting database links
. exporting sequence numbers
exporting directory aliases
exporting context namespaces
exporting foreign function library names
exporting PUBLIC type synonyms
exporting private type synonyms
exporting object type definitions
exporting system procedural objects and actions
exporting pre-schema procedural objects and actions
exporting cluster definitions
about to export SYSTEM's tables via Conventional Path ...
exporting table                    DEF$_AQCALL
exporting table                   DEF$_AQERROR
exporting table                  DEF$_CALLDEST
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.Now (in Oracle10 Express/ Windows) i'm importing the dmp-file using user/schema System, following errors occur:
Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Export file created by EXPORT:V10.02.01 via conventional path
Warning: the objects were exported by SYS, not by you
import done in AL32UTF8 character set and AL16UTF16 NCHAR character set
export client uses UTF8 character set (possible charset conversion)
. importing SYSTEM's objects into SYSTEM
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE UNDO TABLESPACE "UNDOTBS1" BLOCKSIZE 8192 DATAFILE '/u01/app/oracle"
"/oradata/live/undotbs01.dbf' SIZE 251658240       AUTOEXTEND ON NEXT 524288"
"0 MAXSIZE 32765M EXTENT MANAGEMENT LOCAL "
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file '/u01/app/oracle/oradata/live/undotbs01.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "SYSAUX" BLOCKSIZE 8192 DATAFILE '/u01/app/oracle/oradat"
"a/live/sysaux01.dbf' SIZE 346030080       AUTOEXTEND ON NEXT 10485760 MAXS"
"IZE 32765M EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT"
" SPACE MANAGEMENT AUTO"
IMP-00000: Import terminated unsuccessfullyWhy i get those errors when importing? Seems like the main problem is that the export was done in Linux which have it's own directories like '/u01/app/oracle/oradat' and others but in my Windows OS those folders don't exist? The whole import fails because tablespaces couldn't be created, later Schemas couldn't be created and tables also. Can i get the import work somehow?
I runned the import as following:
C:\Users\charlesr>imp userid=system/a FULL=Y FILE=exp_ddl.dmp log=imp.logMy Oracle 10 XE is installed into folder:
D:\oraclexe\app\oracle\product\10.2.0Maybe i should run the import command in drive D where my Oracle lives, not in drive C as i did?
And now when i tried to run the import on drive C, seems like my database user "system/a" is corrupted or password corrupted:
C:\Users\charlesr>d:
D:\>imp userid=system/a FULL=Y FILE=exp_ddl.dmp log=imp.log
Import: Release 10.2.0.1.0 - Production on R Sept 10 17:32:25 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
IMP-00058: ORACLE error 1017 encountered
ORA-01017: invalid username/password; logon deniedUsername:I think i don't have on OS level rights to write to C-drive, that's why i got errors. But now i can't log in with system/a, why so?
Edited by: CharlesRoos on Sep 10, 2010 7:38 AM

CharlesRoos wrote:
Why i get those errors when importing? Seems like the main problem is that the export was done in Linux which have it's own directories like '/u01/app/oracle/oradat' and others but in my Windows OS those folders don't exist? The whole import fails because tablespaces couldn't be created, later Schemas couldn't be created and tables also. Can i get the import work somehow?Precreate tablespaces. You could use import option show=y to capture import run statements and find CREATE TABLESPACE statements. Keep in mind your target database already has undo, temp system, etc. tablespaces so you do not need to precreate them. Then rerun import.
SY.

CREATE TABLESPACE PROBLEM

I'm unable to get sqlplus to recognize predefined Windows environment variables. For example:
CREATE TABLESPACE PRODUCT DATAFILE '%ORACLE_DIR%\oradata\xxx\PRODUCT.DAT' SIZE 1M AUTOEXTEND ON NEXT 1M;
%ORACLE_DIR% = C:\bas\db\oracle
After trying to execute this statement the following error gets returned:
ERROR at line 1:
ORA-01119: error in creating database file
'BAS_ORACLE_HOME\oradata\bas\PRODUCT.DAT'
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
However, when I enter the command as:
CREATE TABLESPACE PRODUCT DATAFILE 'C:\bas\db\oracle\oradata\xxx\PRODUCT.DAT' SIZE 1M AUTOEXTEND ON NEXT 1M;
The tablespace gets completed successfully.
Therefore, how do I get the CREATE TABLESPACE statement to recognize ORACLE_DIR?
Thank you in advance for your help!

I sometimes pass in filenames as parameters to SQL*Plus
and then use the argument substitution variables.
For example:
sqlplus system/manager @myscript.sql c:\mydir\myfile
Where myscript.sql contains
create .... datafile '&1' ...
Another common solution is to construct the script
in a shell environment that does the the OS variable
expansion before the script is passed to SQL*Plus.
Typically this is with a "here document". In Perl
it would be something like:
sqlplus -s <<EOF;
system/manager
create ... datafile $ENV{'ORACLE_DIR'} ...
exit
EOF
-- C

"The CREATE USER statement must be the only statement in the batch" in SQL Azure - why? what to do?

I'm getting an error on a line in the middle of a larger sql script, only in SQL Azure.
IF NOT EXISTS (SELECT * FROM sys.database_principals WHERE name = N'foouser')
CREATE USER [foouser] FOR LOGIN [foouser] WITH DEFAULT_SCHEMA=[dbo]
GO
Error: "The CREATE USER statement must be the only statement in the batch."
I don't actually understand what 'the only statement in the batch' means.
What is a batch? Is it a SQL file? Is it related to a 'GO' statement or an 'IF' statement? What is the reason for the error? And how do I avoid it?
Thanks,
Tim

>IF...ELSE imposes conditions on the execution of a Transact-SQL statement
I understand the general purpose of an If statement. I could let go of our definition of statement counting disagreeing too except that because of the error I'm stuck.
It's less important for Create User but what I am really puzzled over now is a very similar issue how am I supposed to do a safe version of CREATE LOGIN, when I don't know whether a login has been previously created on the server or whether I
am setting up the database on a clean server?
IF NOT EXISTS (SELECT * FROM sys.server_principals WHERE name = N'foouser')
CREATE LOGIN [foouser] WITH PASSWORD = 'asdfasdf'
GO
If I try and execute this script, it throws the same error as above.
The first unworkable workaround idea is to omit the if statement
CREATE LOGIN [foouser] WITH PASSWORD = 'asdfasdf'
GO
But if the login already exists on the server (because a similar script was already run), then the script throws an error.
The second unworkable workaround idea is to do
DROP LOGIN [foouser]
GO
CREATE LOGIN [foouser] WITH PASSWORD = 'asdfasdf'
GO
Obviously this throws an error in the second block if the login doesn't already exist on the server.
The third workaround idea I have is to go conditional by putting an IF condition around DROP instead of CREATE:
Unfortunately that doesn't work for me either!
"The DROP LOGIN statement must be the only statement in the batch"
(This is despite the fact that 'drop login' is listed on the
supported commands page, not the partially supported page..?! Which disagrees with the notes on
this page.)
Anyway the real question I am interesting in addressing is: is there actually a way to have a 'Create/Delete login
if exists' operation which is SQL-Azure compatible and doesn't throw me error messages (which messes with the sql execution tool I am using)?
If there is no way, I would like to believe it's because it would be a bad idea to do this. But in that case why is it a bad idea?
Tim

Error when creating database

when installing 9i server i couldn't create database and after installation i tried to create database using DBCA but same errors occured.
it says null sid name error=2. and then says tns protocol problem.
what should i do?

Kim Gabrielsen (guest) wrote:
: Hi,
: I have tried to install O8 on Linux several times but all have
: failed. I follow the doc written by Tom Bissett which I find
very
: informative on this subject.
: I have the correct env setting, have created oracle user as
: member of the dba group and the install program runs nicely
until
: it starts to create the database. It stops with an error
message.
: The log files look like this (excerpts):
: CRDBORCL.LST
: ORA-06413: Connection not open.
: LCC-00161: Message 161 not found; product=SVRMGR; facility=MGR
: ORA-06413: Connection not open.
: create database "ORCL"
: ORA-03114: not connected to ORACLE
: ORA-06413: Connection not open.
: which is the same results I see if I invoke svrmgr manually
: and tries to connect as 'internal'. BTW srvmgr prompts me for a
: password even though I'm logged on as 'Oracle' which is a
member
: of DBA.
: INSTALL.LOG
: - Entering database actions section.
: - Creating initORCL.ora file
: - Creating crdb2ORCL.sql database catalog and file
creation
: script
: - ERROR: The 'CREATE DATABASE' statement for the ORCL
: database failed.
: egrep failed to find 'ORA-' error in the file:
: /u01/app/oracle/admin/ORCL/create/crdbORCL.lst
: I hope someone can help 'cause I'm stock here...
: Best regards
: Kim Gabrielsen
If you followed the instructions on setting the shared memory
parameters you may have a problem.
In the 'shmparam.h' file set SHMMAX to something smaller than 4G.
I just set mine to 2G or 0x7FFFFFFF and now it works fine.
I have done the Oracle 8.0.5 installation twice now on 2
different machines with success(1 Compaq Proliant 1500 -
RH5.2/2.0.36 kernel and 1 GW2K - RH5.2/2.2.1 kernel) I ran into
several problems along the way but all problems were solvable.
Mark
null

OMWB Create tablespace...

I am migrating from Informix to Oracle !0g using OMWB and the following 'Create Tablespace' statements have been generated by the OMWB in the Create.sql script.
I wish to migrate to tablespace SYSAUX which already exisits in the Oracle 10g schema.
Can I replace the OMWB 'Create Tablespace' statements shown below i.e DBS1, DBS2, ROOTDBS and migrate to exxisting tablespace SYSAUX.
If so can you suggest what the complete statement should be.
Also could you explain the terms of the Create tablespace statements below i.e logging datafile, reuse, autoextend on next 5M maxsize unlimited etc. why does it start at DBS10.dbf etc
REM
REM Start Tablespaces
REM
REM
REM Message : Created tablespace :DBS1
REM User : mobs
CONNECT mobs/abc123
CREATE TABLESPACE DBS1 LOGGING DATAFILE 'DBS10.dbf' SIZE 2000M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED,'DBS11.dbf' SIZE 2000M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED,'DBS12.dbf' SIZE 2000M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED,'DBS13.dbf' SIZE 2000M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED,'DBS14.dbf' SIZE 2000M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED,'DBS15.dbf' SIZE 2000M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED,'DBS16.dbf' SIZE 582M REUSE AUTOEXTEND
ON NEXT 5M MAXSIZE UNLIMITED
REM
REM Message : Created tablespace :DBS2
REM User : mobs
CREATE TABLESPACE DBS2 LOGGING DATAFILE 'DBS20.dbf' SIZE 2000M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED,'DBS21.dbf' SIZE 2000M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED,'DBS22.dbf' SIZE 2000M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED,'DBS23.dbf' SIZE 2000M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED,'DBS24.dbf' SIZE 2000M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED,'DBS25.dbf' SIZE 485M REUSE AUTOEXTEND
ON NEXT 5M MAXSIZE UNLIMITED
REM
REM Message : Created tablespace :ROOTDBS
REM User : mobs
CREATE TABLESPACE ROOTDBS LOGGING DATAFILE 'ROOTDBS0.dbf' SIZE 2000M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED,'ROOTDBS1.dbf' SIZE 97M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED
REM
REM End Tablespaces
REM

These questions have now been answered on the Oracle Database - General forum

Error During Installation: ORA-02180: invalid option for CREATE TABLESPACE

Hi all,
This is our enviroment,
Windows 2000 Service Pack 4
We are installing SAP R/3 Enterprise 4.7 Ext. 200 SR1
First we installed:
Oracle: 9.2
Patch: 9.2.0.7
SAP Central Instance
Now we are installing the DB Instance, but it gives this error:
INFO 2007-11-22 16:58:20
Working directory changed to C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB.
ERROR 2007-11-22 16:58:21
CJS-00084 SQL statement or script failed.DIAGNOSIS: Error message: ORA-02180: invalid option for CREATE TABLESPACE
We are in the step 19 of 34
Create Tablespaces
Please some tips.
Regards,
Erick

Hi! Thanks a lot for the reply.
This is our ora_sql_results.log
================================================================================
2007-11-23, 07:31:09 SAPINST ORACLE start logging for
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.7.0 - Production on Fri Nov 23 07:31:09 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
OPEN
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
SAPINST: End of output of SQL executing program D:\oracle\TVD\920/bin/sqlplus.
2007-11-23, 07:31:10 SAPINST ORACLE stop logging
================================================================================
2007-11-23, 07:31:10 SAPINST ORACLE start logging for
connect / as sysdba ;
CREATE TABLESPACE PSAP@SCHEMAID@ DATAFILE 'E:\oracle\TVD\sapdata4\psap@schemaid@_1\psap@[email protected]' SIZE 2000M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M LOGGING ONLINE PERMANENT EXTENT MANAGEMENT LOCAL AUTOALLOCATE SEGMENT SPACE MANAGEMENT AUTO ;
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.7.0 - Production on Fri Nov 23 07:31:10 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
CREATE TABLESPACE PSAP@SCHEMAID@ DATAFILE 'E:\oracle\TVD\sapdata4\psap@schemaid@_1\psap@[email protected]' SIZE 2000M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M LOGGING ONLINE PERMANENT EXTENT MANAGEMENT LOCAL AUTOALLOCATE SEGMENT SPACE MANAGEMENT AUTO
ERROR at line 1:
ORA-02180: invalid option for CREATE TABLESPACE
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
SAPINST: End of output of SQL executing program D:\oracle\TVD\920/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2007-11-23, 07:31:10 SAPINST ORACLE stop logging
And this is our alert_SID.log
Dump file d:\oracle\tvd\saptrace\background\alert_tvd.log
Thu Nov 22 16:27:45 2007
ORACLE V9.2.0.7.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.0 Service Pack 4, CPU type 586
Thu Nov 22 16:27:45 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 2
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.7.0.
System parameters with non-default values:
processes = 80
sessions = 96
shared_pool_size = 251658240
sga_max_size = 546906620
shared_pool_reserved_size= 24363663
enqueue_resources = 8000
control_files = E:\oracle\TVD\origlogA\cntrl\cntrlTVD.dbf, E:\oracle\TVD\sapdata1\system_1\cntrl\cntrlTVD.dbf, D:\oracle\TVD\saparch\cntrl\cntrlTVD.dbf
db_block_size = 8192
db_cache_size = 251658240
compatible = 9.2.0
log_archive_start = TRUE
log_archive_dest = D:\oracle\TVD\oraarch\TVDarch
log_buffer = 1048576
log_checkpoint_interval = 0
db_files = 254
fast_start_mttr_target = 900
log_checkpoints_to_alert = TRUE
control_file_record_keep_time= 30
dml_locks = 4000
transaction_auditing = FALSE
undo_management = AUTO
undo_tablespace = PSAPUNDO
undo_retention = 43200
remote_os_authent = TRUE
hash_join_enabled = FALSE
background_dump_dest = D:\oracle\TVD\saptrace\background
user_dump_dest = D:\oracle\TVD\saptrace\usertrace
core_dump_dest = D:\oracle\TVD\saptrace\background
optimizer_features_enable= 9.2.0
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = TVD
open_cursors = 800
pga_aggregate_target = 324848844
workarea_size_policy = AUTO
statistics_level = typical
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Thu Nov 22 16:27:48 2007
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=8
ARC1 started with pid=9
Thu Nov 22 16:27:48 2007
ARC0: Archival started
Thu Nov 22 16:27:48 2007
ARCH: STARTING ARCH PROCESSES COMPLETE
Thu Nov 22 16:27:48 2007
ARC1: Archival started
Thu Nov 22 16:27:48 2007
ARC0: Becoming the 'no FAL' ARCH
Thu Nov 22 16:27:48 2007
ARC1: Becoming the heartbeat ARCH
Thu Nov 22 16:27:48 2007
ARC0: Becoming the 'no FAL' ARCHARC0: Thread not mounted
Thu Nov 22 16:27:48 2007
ARC1: Becoming the heartbeat ARCHARC1: Thread not mounted
Thu Nov 22 16:27:49 2007
alter database mount exclusive
Thu Nov 22 16:27:49 2007
ORA-00202: controlfile: 'E:\oracle\TVD\origlogA\cntrl\cntrlTVD.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Thu Nov 22 16:27:50 2007
ORA-205 signalled during: alter database mount exclusive...
Shutting down instance (abort)
License high water mark = 1
Instance terminated by USER, pid = 1768
Thu Nov 22 16:28:05 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 2
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.7.0.
System parameters with non-default values:
processes = 80
sessions = 96
shared_pool_size = 251658240
sga_max_size = 546906620
shared_pool_reserved_size= 24363663
enqueue_resources = 8000
control_files = E:\oracle\TVD\origlogA\cntrl\cntrlTVD.dbf, E:\oracle\TVD\sapdata1\system_1\cntrl\cntrlTVD.dbf, D:\oracle\TVD\saparch\cntrl\cntrlTVD.dbf
db_block_size = 8192
db_cache_size = 251658240
compatible = 9.2.0
log_archive_start = TRUE
log_archive_dest = D:\oracle\TVD\oraarch\TVDarch
log_buffer = 1048576
log_checkpoint_interval = 0
db_files = 254
fast_start_mttr_target = 900
log_checkpoints_to_alert = TRUE
control_file_record_keep_time= 30
dml_locks = 4000
transaction_auditing = FALSE
undo_management = AUTO
undo_tablespace = PSAPUNDO
undo_retention = 43200
remote_os_authent = TRUE
hash_join_enabled = FALSE
background_dump_dest = D:\oracle\TVD\saptrace\background
user_dump_dest = D:\oracle\TVD\saptrace\usertrace
core_dump_dest = D:\oracle\TVD\saptrace\background
optimizer_features_enable= 9.2.0
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = TVD
open_cursors = 800
pga_aggregate_target = 324848844
workarea_size_policy = AUTO
statistics_level = typical
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Thu Nov 22 16:28:08 2007
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=8
ARC0: Archival started
ARC1 started with pid=9
Thu Nov 22 16:28:08 2007
ARCH: STARTING ARCH PROCESSES COMPLETE
Thu Nov 22 16:28:08 2007
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no FAL' ARCHARC0: Thread not mounted
Thu Nov 22 16:28:09 2007
ARC1: Archival started
Thu Nov 22 16:28:09 2007
ARC1: Becoming the heartbeat ARCH
ARC1: Becoming the heartbeat ARCHARC1: Thread not mounted
Thu Nov 22 16:28:11 2007
CREATE DATABASE TVD CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET WE8DEC NATIONAL CHARACTER SET UTF8 DATAFILE 'E:\oracle\TVD\sapdata1\system_1\system.data1' SIZE 550M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE 'E:\oracle\TVD\sapdata3\temp_1\temp.data1' SIZE 540M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE 'E:\oracle\TVD\sapdata2\undo_1\undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('E:
oracle/TVD/origlogA/log_g11m1.dbf',
'D:
oracle/TVD/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('E:
oracle/TVD/origlogB/log_g12m1.dbf',
'D:
oracle/TVD/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('E:
oracle/TVD/origlogA/log_g13m1.dbf',
'D:
oracle/TVD/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('E:
oracle/TVD/origlogB/log_g14m1.dbf',
'D:
oracle/TVD/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
Thu Nov 22 16:28:12 2007
Database mounted in Exclusive Mode.
Thu Nov 22 16:28:29 2007
Successful mount of redo thread 1, with mount id 1434613531
Assigning activation ID 1434613531 (0x5582771b)
Thread 1 opened at log sequence 1
Thu Nov 22 16:28:30 2007
ARC1: Media recovery disabled
Thu Nov 22 16:28:31 2007
Current log# 1 seq# 1 mem# 0: E:\ORACLE\TVD\ORIGLOGA\LOG_G11M1.DBF
Current log# 1 seq# 1 mem# 1: D:\ORACLE\TVD\MIRRLOGA\LOG_G11M2.DBF
Successful open of redo thread 1
Thu Nov 22 16:28:31 2007
ARC0: Media recovery disabled
Thu Nov 22 16:28:31 2007
SMON: enabling cache recovery
Thu Nov 22 16:28:32 2007
WARNING: Default passwords for SYS and SYSTEM will be used.
 Please change the passwords.
Thu Nov 22 16:28:32 2007
create tablespace SYSTEM datafile 'E:\oracle\TVD\sapdata1\system_1\system.data1' SIZE 550M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
EXTENT MANAGEMENT LOCAL online
Thu Nov 22 16:28:51 2007
Completed: create tablespace SYSTEM datafile 'E:\oracle\TVD\
Thu Nov 22 16:28:51 2007
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
Thu Nov 22 16:29:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:29:10 2007
CREATE UNDO TABLESPACE PSAPUNDO DATAFILE 'E:\oracle\TVD\sapdata2\undo_1\undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
Thu Nov 22 16:29:35 2007
Successfully onlined Undo Tablespace 1.
Completed: CREATE UNDO TABLESPACE PSAPUNDO DATAFILE 'E:\orac
Thu Nov 22 16:29:36 2007
CREATE TEMPORARY TABLESPACE PSAPTEMP TEMPFILE 'E:\oracle\TVD\sapdata3\temp_1\temp.data1' SIZE 540M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
Completed: CREATE TEMPORARY TABLESPACE PSAPTEMP TEMPFILE 'E:
Thu Nov 22 16:29:36 2007
ALTER DATABASE DEFAULT TEMPORARY TABLESPACE PSAPTEMP
Completed: ALTER DATABASE DEFAULT TEMPORARY TABLESPACE PSAPTE
Thu Nov 22 16:29:39 2007
SMON: enabling tx recovery
Thu Nov 22 16:29:39 2007
Beginning local checkpoint up to RBA [0x1.538b.10], SCN: 0x0000.000019d9
Completed checkpoint up to RBA [0x1.538b.10], SCN: 0x0000.000019d9
kwqplbsc: open notifier exception err 604
replication_dependency_tracking turned off (no async multimaster replication found)
Completed: CREATE DATABASE TVD CONTROLFILE REUSE MAXLOGFILES
Thu Nov 22 16:30:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:31:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:31:28 2007
Beginning log switch checkpoint up to RBA [0x2.2.10], SCN: 0x0000.00006489
Thread 1 advanced to log sequence 2
Thu Nov 22 16:31:28 2007
ARC1: Media recovery disabled
Thu Nov 22 16:31:29 2007
Current log# 2 seq# 2 mem# 0: E:\ORACLE\TVD\ORIGLOGB\LOG_G12M1.DBF
Current log# 2 seq# 2 mem# 1: D:\ORACLE\TVD\MIRRLOGB\LOG_G12M2.DBF
Thu Nov 22 16:32:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:33:08 2007
ARC0: Media recovery disabled
Thu Nov 22 16:33:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:33:16 2007
Completed checkpoint up to RBA [0x2.2.10], SCN: 0x0000.00006489
Thu Nov 22 16:33:26 2007
Beginning log switch checkpoint up to RBA [0x3.2.10], SCN: 0x0000.00009227
Thread 1 advanced to log sequence 3
Thu Nov 22 16:33:26 2007
ARC0: Media recovery disabled
Thu Nov 22 16:33:26 2007
Current log# 3 seq# 3 mem# 0: E:\ORACLE\TVD\ORIGLOGA\LOG_G13M1.DBF
Current log# 3 seq# 3 mem# 1: D:\ORACLE\TVD\MIRRLOGA\LOG_G13M2.DBF
Thu Nov 22 16:34:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:35:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:35:19 2007
Completed checkpoint up to RBA [0x3.2.10], SCN: 0x0000.00009227
Thu Nov 22 16:35:28 2007
Beginning log switch checkpoint up to RBA [0x4.2.10], SCN: 0x0000.0000b0ac
Thread 1 advanced to log sequence 4
Current log# 4 seq# 4 mem# 0: E:\ORACLE\TVD\ORIGLOGB\LOG_G14M1.DBF
Thu Nov 22 16:35:28 2007
ARC1: Media recovery disabled
Thu Nov 22 16:35:28 2007
Current log# 4 seq# 4 mem# 1: D:\ORACLE\TVD\MIRRLOGB\LOG_G14M2.DBF
Thu Nov 22 16:36:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:37:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:38:08 2007
ARC0: Media recovery disabled
Thu Nov 22 16:38:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:38:51 2007
Completed checkpoint up to RBA [0x4.2.10], SCN: 0x0000.0000b0ac
Thu Nov 22 16:38:59 2007
Beginning log switch checkpoint up to RBA [0x5.2.10], SCN: 0x0000.0000e12b
Thread 1 advanced to log sequence 5
Thu Nov 22 16:38:59 2007
Current log# 1 seq# 5 mem# 0: E:\ORACLE\TVD\ORIGLOGA\LOG_G11M1.DBF
Current log# 1 seq# 5 mem# 1: D:\ORACLE\TVD\MIRRLOGA\LOG_G11M2.DBF
Thu Nov 22 16:39:00 2007
ARC0: Media recovery disabled
Thu Nov 22 16:39:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:40:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:41:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:41:09 2007
Completed checkpoint up to RBA [0x5.2.10], SCN: 0x0000.0000e12b
Thu Nov 22 16:41:18 2007
Beginning log switch checkpoint up to RBA [0x6.2.10], SCN: 0x0000.0000ee94
Thread 1 advanced to log sequence 6
Current log# 2 seq# 6 mem# 0: E:\ORACLE\TVD\ORIGLOGB\LOG_G12M1.DBF
Current log# 2 seq# 6 mem# 1: D:\ORACLE\TVD\MIRRLOGB\LOG_G12M2.DBF
Thu Nov 22 16:41:18 2007
ARC1: Media recovery disabled
Thu Nov 22 16:42:08 2007
Fri Nov 23 07:38:10 2007
ARC1: Media recovery disabled
Regards,
Erick

How to specify tablespace for a primary key inde in create table statement

How to specify the tablespace for a primary key index in a create table statement?
Does the following statement is right?
CREATE TABLE 'GPS'||TO_CHAR(SYSDATE+1,'YYYYMMDD')
            ("ID" NUMBER(10,0) NOT NULL ENABLE,
            "IP_ADDRESS" VARCHAR2(32 BYTE),
            "EQUIPMENT_ID" VARCHAR2(32 BYTE),
            "PACKET_DT" DATE,
            "PACKET" VARCHAR2(255 BYTE),
            "PACKET_FORMAT" VARCHAR2(32 BYTE),
            "SAVED_TIME" DATE DEFAULT CURRENT_TIMESTAMP,
             CONSTRAINT "UDP_LOG_PK" PRIMARY KEY ("ID") TABLESPACE "INDEX_DATA"
             TABLESPACE "SBM_DATA";   Thank you
Edited by: qkc on 09-Nov-2009 13:42

As orafad indicated, you'll have to use the USING INDEX clause from the documentation, i.e.
SQL> ed
Wrote file afiedt.buf
1 CREATE TABLE GPS
2              ("ID" NUMBER(10,0) NOT NULL ENABLE,
3              "IP_ADDRESS" VARCHAR2(32 BYTE),
4              "EQUIPMENT_ID" VARCHAR2(32 BYTE),
5              "PACKET_DT" DATE,
6              "PACKET" VARCHAR2(255 BYTE),
7              "PACKET_FORMAT" VARCHAR2(32 BYTE),
8              "SAVED_TIME" DATE DEFAULT CURRENT_TIMESTAMP,
9               CONSTRAINT "UDP_LOG_PK" PRIMARY KEY ("ID") USING INDEX TABLESP
ACE "USERS"
10               )
11*              TABLESPACE "USERS"
SQL> /
Table created.Justin

Error when creating the form in Salary Statement of ESS

Dear All,
We are implementing ESS and MSS,
when i try to select ESS>Benfits and Payment>Salary statement, it shows the error as com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form.
We have configured ADS in our ERP system as per the ADS config guide.
Landscape is, NW04s ,ECC5.0 integration, corresponding ESS and MSS versions.
Complete Error is:com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form
 at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
 at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
 at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:495)
 at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:366)
 at com.sap.xss.hr.rep.fcrfw.FcRepFramework.processFollowingActions(FcRepFramework.java:454)
 at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:350)
 at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:264)
 at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:243)
 at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
 at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:196)
 at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:256)
 at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:217)
 at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:238)
 at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
 at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
 at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
 at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:466)
 at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:354)
 at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:179)
 at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
your input will be appreciated,
please do the needful.
Regards,
Sireesha.

hi Sandip
I clear the temporary files, but the error persist.
I think so, my error is because otherwise customizing the salary statement is seen in ERP (Back-End) but I can not see through the sap portal (Error: Salary Statement http://img153.imageshack.us/img153/3007/payroll2.jpg)
thanks for your post and helps,
Ivan

Error in create tablespace statement

Similar Messages

Maybe you are looking for