Error in creating a connection pool (No suitable driver)

I try to create a connection pool in a Weblogic server 7.0 with the following config:
URL:
jdbc:oracle:oci9:@db_name
Driver Classname:
oracle.jdbc.driver.OracleDriver
Properties(key=value):
user=user_name
password=user_password
dll=ocijdbc9
server=db_name
protocol=oci
my computer (windows 2000) has installed Oracle 9i client, and this connection
pool will connect to Oracle 8i server. Besides, I have config classes12.zip in
the "classpath" and ocijdbc9.dll in the "path" environment variables.
Can Oracle 9i driver connect to a Oracle 8i server? Or there is other problems?
Thanks in advance.

Please try URL = jdbc:oracle:oci8:@db_name... that should be fine.
Yes, you can connect to 8i oracle database using 9i driver.
Also, make sure you have classes12.zip in classpath and ocijdbc9.dll in path.
Thanks,
Mitesh
Jacky Ho wrote:
I try to create a connection pool in a Weblogic server 7.0 with the following config:
URL:
jdbc:oracle:oci9:@db_name
Driver Classname:
oracle.jdbc.driver.OracleDriver
Properties(key=value):
user=user_name
password=user_password
dll=ocijdbc9
server=db_name
protocol=oci
my computer (windows 2000) has installed Oracle 9i client, and this connection
pool will connect to Oracle 8i server. Besides, I have config classes12.zip in
the "classpath" and ocijdbc9.dll in the "path" environment variables.
Can Oracle 9i driver connect to a Oracle 8i server? Or there is other problems?
Thanks in advance.

Similar Messages

Error creating a connection pool (No suitable driver)

I have just installed WLS6.1 SP3
I try to create a connection with the following parameters
URL = jdbc:oracle:thin@myOracleServer:1521:myOracleSID
DriverName = oracle.jdbc.driver.OracleDriver
every thing else is left as the defaults,
when I click create everything is OK.
I then go to the "Targets" tab and select myserver,
move it to the chosen column and click apply.
I then get the error
<Error> <JDBC> <Cannot startup connection pool "myCP" No suitable driver>
I looked at the doc edocs.bea.com/wls/docs61/jdbc/thirdparty.html
Under the section "Setting environment for your third party driver"
it implys that if your using sybase jconnect or oracle thin drivers
you do not need to do anything else.
I looked in the weblogic.jar file and the OracleDriver.class file
is there under oracle\jdbc\driver.
the CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
I would have thought that the driver class in the jar file
would have be picked up given the path & classname match the
driver name enter in the console.
Any ideas on how to fix this problem?

"Robert Towler" <[email protected]> wrote in message
news:3dd3ea04$[email protected]..
Thanks Slava, you were correct,
I really appreciate it.Glad to help :)
Regards,
Slava Imeshev
"Slava Imeshev" <[email protected]> wrote:
Hi Robert,
Looks like colon is missing after jdbc:oracle:thin. The url should be
jdbc:oracle:thin:@myOracleServer:1521:myOracleSID
Regards,
Slava Imeshev
"Robert Towler" <[email protected]> wrote in message
news:3dd3e3c6$[email protected]..
I have just installed WLS6.1 SP3
I try to create a connection with the following parameters
URL = jdbc:oracle:thin@myOracleServer:1521:myOracleSID
DriverName = oracle.jdbc.driver.OracleDriver
every thing else is left as the defaults,
when I click create everything is OK.
I then go to the "Targets" tab and select myserver,
move it to the chosen column and click apply.
I then get the error
<Error> <JDBC> <Cannot startup connection pool "myCP" No suitable
driver>
>>>
I looked at the doc edocs.bea.com/wls/docs61/jdbc/thirdparty.html
Under the section "Setting environment for your third party driver"
it implys that if your using sybase jconnect or oracle thin drivers
you do not need to do anything else.
I looked in the weblogic.jar file and the OracleDriver.class file
is there under oracle\jdbc\driver.
the CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
I would have thought that the driver class in the jar file
would have be picked up given the path & classname match the
driver name enter in the console.
Any ideas on how to fix this problem?

Error while creating JDBC connection pool for MSSQL database

Hi,
From my windows m/c, I am trying to configure a connection pool to connect to
an MSSQL database on another m/c. While setting the targets, i get the error :-
<Mar 11, 2004 6:17:52 PM GMT+08:00> <Error> <JDBC> <Cannot startup connection
pool "gcdb_connpool" Cannot load driver class: com.microsoft.jdbc.sqlserver.SQLServerDriver>
I have added the path of the jars for the driver in the classpath.
Any help would be appreciated.
Thanks.

Hi. Read the weblogic startup script, and follow how it creates
a classpath argument for the server. You must get the driver jars
into that classpath.
Joe
Neha wrote:
Hi,
From my windows m/c, I am trying to configure a connection pool to connect to
an MSSQL database on another m/c. While setting the targets, i get the error :-
<Mar 11, 2004 6:17:52 PM GMT+08:00> <Error> <JDBC> <Cannot startup connection
pool "gcdb_connpool" Cannot load driver class: com.microsoft.jdbc.sqlserver.SQLServerDriver>
I have added the path of the jars for the driver in the classpath.
Any help would be appreciated.
Thanks.

Error While Creating Informix Connection Pool

Hi,
I am trying to port an application from Weblogic 6.1 to Weblogic 8.1. The Application accesses Informix database. I used the following driver, url and properties while connecting to this database using Weblogic 6.1
url:->jdbc:weblogic:informix4:snss_live
Driver ClassName :-> weblogic.jdbc.informix.InformixDriver
Properties :->
port=22000
user=snssadmn
password=snssadmn
server=10.115.26.40
The above used to work fine with weblogic 6.1
With Weblogic 8.1, I am using the following properties
url :-> jdbc:bea:informix://10.115.26.40:22000;informixServer=10.115.26.40;databaseName=snss_live
Driver ClassName :-> weblogic.jdbc.informix.InformixDriver
Properties :->
informixServer=10.115.26.40
user=snssadmn
portNumber=22000
databaseName=snss_live
serverName=10.115.26.40
However using these properties I am getting the following error while deploying the Connection Pool to the Managed Server
<Dec 29, 2004 12:26:53 PM EST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "Btv_Vms_Pool": [BEA][Informix JDBC Driver][Informix]INFORMIXSERVER does not match either DBSERVERNAME or DBSERVERALIASES.>
<Dec 29, 2004 12:26:54 PM EST> <Error> <JDBC> <BEA-001150> <Connection Pool "Btv_Vms_Pool" deployment failed with the following error: 0:Could not create pool connection. The DBMS driver exception was: [BEA][Informix JDBC Driver][Informix]INFORMIXSERVER does not match either DBSERVERNAME or DBSERVERALIASES..>
Any idea as to why this is happening
Regards
Nitin Nair

Hi. I suspect that the databaseName property is causing the problem in
8.1. Remove it and see if that works. Also, try running:
java utils.dbping, and giving it the properties it asks for, for your
Informix connection. Once it succeeds in making a connection, it will
print out the URL and properties it used. Then define the pool with
those (and only those) properties and URL.
Joe
Nitin Nair wrote:
Hi,
I am trying to port an application from Weblogic 6.1 to Weblogic 8.1. The Application accesses Informix database. I used the following driver, url and properties while connecting to this database using Weblogic 6.1
url:->jdbc:weblogic:informix4:snss_live
Driver ClassName :-> weblogic.jdbc.informix.InformixDriver
Properties :->
port=22000
user=snssadmn
password=snssadmn
server=10.115.26.40
The above used to work fine with weblogic 6.1
With Weblogic 8.1, I am using the following properties
url :-> jdbc:bea:informix://10.115.26.40:22000;informixServer=10.115.26.40;databaseName=snss_live
Driver ClassName :-> weblogic.jdbc.informix.InformixDriver
Properties :->
informixServer=10.115.26.40
user=snssadmn
portNumber=22000
databaseName=snss_live
serverName=10.115.26.40
However using these properties I am getting the following error while deploying the Connection Pool to the Managed Server
<Dec 29, 2004 12:26:53 PM EST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "Btv_Vms_Pool": [BEA][Informix JDBC Driver][Informix]INFORMIXSERVER does not match either DBSERVERNAME or DBSERVERALIASES.>
<Dec 29, 2004 12:26:54 PM EST> <Error> <JDBC> <BEA-001150> <Connection Pool "Btv_Vms_Pool" deployment failed with the following error: 0:Could not create pool connection. The DBMS driver exception was: [BEA][Informix JDBC Driver][Informix]INFORMIXSERVER does not match either DBSERVERNAME or DBSERVERALIASES..>
Any idea as to why this is happening
Regards
Nitin Nair

Cannot startup connection pool no suitable driver /WLS 6.1 SP4

hi all,
i got a problem in creating a ConnectionPool with weblogic 6.1 sp4.
my connection pool has following config data:
URL:jdbc:oracle:[email protected]:1521:ESECD7
Driver:oracle.jdbc.driver.OracleDriver
props
username=aaaa
password=bbbb
in my startWebLogic.cmd i have following classpath:
set PATH=.\bin;%PATH%;c:\bea\wlserver6.1\config\mydomain;c:\bea\wlserver6.1\bin\oci817_8;c:\oracle\ora92\bin;%PATH%
set CLASSPATH=C:\oracle\ora92\jdbc\lib\classes111.zip;C:\oracle\ora92\jdbc\lib\classes12.zip;.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;c:\bea\jolt.jar;c:\bea\joltwls.jar;c:\bea\joltjse.jar
but i keep on gettign the exception Cannot startup connection pool.. no suitable
driver
to me it looks like everything is in classpath...
any ideas?
regards
marco

Marco wrote:
hi all,
i got a problem in creating a ConnectionPool with weblogic 6.1 sp4.
my connection pool has following config data:
URL:jdbc:oracle:[email protected]:1521:ESECD7
Driver:oracle.jdbc.driver.OracleDriver
props
username=aaaa
password=bbbb
in my startWebLogic.cmd i have following classpath:
set PATH=.\bin;%PATH%;c:\bea\wlserver6.1\config\mydomain;c:\bea\wlserver6.1\bin\oci817_8;c:\oracle\ora92\bin;%PATH%
set CLASSPATH=C:\oracle\ora92\jdbc\lib\classes111.zip;C:\oracle\ora92\jdbc\lib\classes12.zip;.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;c:\bea\jolt.jar;c:\bea\joltwls.jar;c:\bea\joltjse.jar
but i keep on gettign the exception Cannot startup connection pool.. no suitable
driver
to me it looks like everything is in classpath...
any ideas?
regards
marcoHi. Read the weblogi startServer script, and the startWLS script it calls. These
scripts build up a string which is added to the java commandline that starts
the server, with an argument -classpath ....... Unless the driver shows up there,
the server doesn't see it.
However, we already include a version of the oracle thin driver. It may not be
the best (it's old), so you will want to make sure you version gets in to the classpath
argument ahead of our stuff, but the old driver would have been invoked...
Therefore, I suspect your URL is not exactly correct. Please verify that this exact URL
works in a simple standalone JDBC program using the driver you want, without any
weblogic code in the picture.
thanks,
Joe

How to create the connection pool using jdbc20 driver?

Hi all,
My configuration is WL4.5 SP5 + jdk1.2.2+WinNT+ Oracle thin driver
8.1.6.
It is creating the connections with weblogic.jdbc.pool.Driver, whereas i
want the connections in the pool to be created with jdbc20 driver. This
how my pool definition is defined.
weblogic.jdbc.connectionPool.PoolName=\
url=jdbc:oracle:thin:@<IP address>:<Instance>,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=1,\
maxCapacity=40,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=5,\
refreshMinutes=10,\
testTable=dual,\
props=user=XXXX;password=XXXX
The reason is I want to use BLOB's. I have a message posted in jdbc news
group with the exception i got. But since this more of a environement
issue i am posting it here.
Any help is appreciated,
Thanks
John

Here is the correct pool definition.
################JDBC20 Driver#########################
weblogic.jdbc.connectionPool.jdbc20Pool=\
url=jdbc20:weblogic:oracle,\
driver=weblogic.jdbc20.oci.Driver,\
loginDelaySecs=1,\
initialCapacity=1,\
maxCapacity=1,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=10,\
testTable=dual,\
props=user=SCOTT;password=tiger;server=goldengate
weblogic.allow.reserve.weblogic.jdbc.connectionPool.jdbc20Pool=guest
Hope this helps,
--Kumar
Kuppuswamy Seshadhri wrote:
I think you are missing the port number.
A working example,
Ensuring
- TSNAMES is setup and the service is running
- set ORACLE_HOME variable in setenv.cmd
weblogic.jdbc.connectionPool.theOraclePool=\
url=jdbc:oracle:thin:@IPADRESS:1521:orcl,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=1,\
maxCapacity=10,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=10,\
testTable=dual,\
props=user=XXXX;password=XXXX;
weblogic.allow.reserve.weblogic.jdbc.connectionPool.theOraclePool=everyone
Kuppu
"John Galt" <[email protected]> wrote in message
news:[email protected]..
Hi all,
My configuration is WL4.5 SP5 + jdk1.2.2+WinNT+ Oracle thin driver
8.1.6.
It is creating the connections with weblogic.jdbc.pool.Driver, whereas i
want the connections in the pool to be created with jdbc20 driver. This
how my pool definition is defined.
weblogic.jdbc.connectionPool.PoolName=\
url=jdbc:oracle:thin:@<IP address>:<Instance>,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=1,\
maxCapacity=40,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=5,\
refreshMinutes=10,\
testTable=dual,\
props=user=XXXX;password=XXXX
The reason is I want to use BLOB's. I have a message posted in jdbc news
group with the exception i got. But since this more of a environement
issue i am posting it here.
Any help is appreciated,
Thanks
John

Error: Creating a Connection Pool: issue with valid transaction levels

Server: SunOS 5.8 Generic_117350-27 sun4u sparc SUNW,UltraAX-MP
App Server: Sun Java System Application Server 8.2
Jar: ojdbc14.jar
Datasource Classname: oracle.jdbc.pool.OracleConnectionPoolDataSource
Resource Type: javax.sql.ConnectionPoolDataSource
[Issue]
Using /SUNWappserver/lib/ojdbc14.jar, when I create my connection pool in Sun Java System Application Server 8.2, I return the following error each time I try to start the domain:
[#|2006-07-28T14:53:56.169-0500|WARNING|sun-appserver-pe8.2|javax.enterprise.resource.resourceadapter|_ThreadID=11;|RAR5117 : Failed to obtain/create connection. Reason : The isolation level could not be set: READ_COMMITTED and SERIALIZABLE are the only valid transaction levels|#]
When I change the value to "SERIALIZABLE" in my domain.xml file, I receive the following error in my server.log:
Caused by: org.xml.sax.SAXParseException: Attribute "transaction-isolation-level" with value "SERIALIZABLE" must have a value from the list "read-uncommitted read-committed repeatable-read serializable ".
So, I'm stuck!
I can't use the values READ_COMMITTED or SERIALIZABLE since the valid values are "read-uncommitted read-committed repeatable-read serializable ".
Case sensitivity matters.
Any thoughts or help would be greatly appreciated.
Thanks,
--Todd

The Oracle JDBC accepts TRANSACTION_READ_COMMITTED and TRANSACTION_SERIALIZABLE isolation levels.
Example:
connAttr.setProperty(“TRANSACTION_ISOLATION”, “TRANSACTION_SERIALIZABLE”);
I'd check with the Apps server folks.
Kuassi - blog http://db360.blogspot.com/
------ book http://www.amazon.com/gp/product/1555583296/

How to create a connection pooling in Netbeans 6.0 using the oracle driver

hi all,
I am using Netbeans 6.0. Apache Tomcat 6.0.14 server, oracle 9i.
I tried to create a connection pooling using tomcat web server.
I have included the following code in context.xml and web.xml.
CONTEXT.XML:
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/network1">
<Resource name="jdbc/myoracle"
auth="Container"
type="javax.sql.DataSource"
username="scott"
password="tiger"
factory="BasicDataSourceFactory"
driverClassName="oracle.jdbc.OracleDriver"
url="jdbc:odbc:thin:@127.0.0.1:1521:mydb"
maxActive="20"
maxIdle="10"
maxwait="-1"/>
</Context>
WEB.XML:
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
<session-config>
<session-timeout>
30
</session-timeout>
</session-config>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/myoracle</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
After that i have included the following JDBC driver's jar files in the $Catalina_Home/lib folder.
classes 111.jar,
classes 111_g.jar
classes12.jar
classes 12_g.jar
classes12dms.jar
classes12dms_g.jar
nls_charset11.jar
nls_charset12.jar
ocrs12.jar
ojdbc14.jar
ojdbc14_g.jar
Then i stop the tomcat web server and start it again.
In jsp page i have included the following code:
Context ctx=new InitialContext();
Context envctx=(Context)ctx.lookup("java:comp:env");
DataSource ds=(DataSource)envctx.lookup("jdbc/myoracle");
Connection con=ds.getConnection(); ----->(In this line an error occured that Connection class cannot be found.)
please help me how to create a connection pooling and rectify the error in conneciton.
Thanks in advance

Please refer
http://www.netbeans.org/kb/60/web/customer-book.html

Problem creating a connection pool for mssql server

Hi
i downloaded the microsoft type 4 driver for JDBC and i have installed it. now i am trying to create a connection pool for MS Sql server but each time i ping i keep getting an error telling me
Operation 'pingConnectionPool' failed in 'resources' Config Mbean. Target exception message: Connection could not be allocated because: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket
please can someone help out on this
Ifeanyichukwu

I assume that you installed the driver correctly. You did go into the app sever admin and set the JVM path? You do this by going to Application Server | JVM Settings | Path Settings and putting in an entry for Classpath Prefix.
If that is done and it's not something basic like your database isn't turned on, then it must be your settings. To to Sun's site and search for dbping. http://developers.sun.com/prodtech/appserver/utilities/dbping/dbping_overview.html
Deploy this program and run it. It is a very simple tool that lets you test different property settings. Play around with different settings until you get a ping.
If that doesn't work post your connect pool settings.
Good luck
Mike

Getting error while configuring DbAdapter connection pool

I have SOA Suite 11g (11.1.1.5.0) installed.
I have created a Data Source (soademoDatabase) in WLS Admin console, as per instructions in Oracle Tutorial.
Then I created a connection pool for DbAdapter.
However when I tried to update the DbAdapter to 'Redeploy this application', I got following error:
weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.wl.ConnectionInstanceBeanImpl@a0965ff7(//
[javax.resource.cci.ConnectionFactory]/ConnectionInstances[eis/DB/soademoDatabase])"
After this, when I restarted Admin and Managed servers, DbAdapter is failing to start. Following error is shown in the log:
[4] The ra.xml <connectionfactory-impl-class> class 'oracle.tip.adapter.apps.AppsConnectionFactory' could not be loaded from the resource adapter archive/application because of the following error: java.lang.NoClassDefFoundError: oracle/tip/adapter/db/DBConnectionFactory
at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:230)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
Any help/suggestion in this regard is really appreciated.
Thanks in advance

Thanks Anuj.
I checked DBAdapter deployment plan..not sure which entries to remove.."eis/DB/soademoDatabase" is referenced 3-4 times in it.
Please find below the plan file. If you can advise which entries to remove, that will be really helpful.
<?xml version='1.0' encoding='UTF-8'?>
<deployment-plan xmlns="http://xmlns.oracle.com/weblogic/deployment-plan" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/deployment-plan http://xmlns.oracle.com/weblogic/deployment-plan/1.0/deployment-plan.xsd" global-variables="false">
<application-name>connectors</application-name>
<variable-definition>
<variable>
<name>ConnectionInstance_1.eis/DB/soademoDatabase_JNDIName_13299030406160</name>
<value>eis/DB/soademoDatabase</value>
</variable>
<variable>
<name>ConfigProperty_xADataSourceName_Value_13299033172170</name>
<value>jdbc/soademoDatabase</value>
</variable>
</variable-definition>
<module-override>
<module-name>DbAdapter.rar</module-name>
<module-type>rar</module-type>
<module-descriptor external="false">
<root-element>weblogic-connector</root-element>
<uri>META-INF/weblogic-ra.xml</uri>
<variable-assignment>
<name>ConnectionInstance_1.eis/DB/soademoDatabase_JNDIName_13299030406160</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="1.eis/DB/soademoDatabase"]/jndi-name</xpath>
<origin>planbased</origin>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_xADataSourceName_Value_13299033172170</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/DB/soademoDatabase"]/connection-properties/properties/property/[name="xADataSourceName"]/value</xpath>
</variable-assignment>
<hash-code>1329903975155</hash-code>
</module-descriptor>
<module-descriptor external="false">
<root-element>connector</root-element>
<uri>META-INF/ra.xml</uri>
</module-descriptor>
<module-descriptor external="true">
<root-element>wldf-resource</root-element>
<uri>META-INF/weblogic-diagnostics.xml</uri>
</module-descriptor>
</module-override>
<config-root>C:\Middleware\SOASuite11gR1PS4\Oracle_SOA1\soa\connectors\plan</config-root>
</deployment-plan>
Thanks

Create A Connection Pool In the ServletContextListener

The Specification says that we should create the connection pool in the ServletContextListener. I have the code for creating a connection pool (see below). How do I create it in the ServletContextListener?
import java.sql.Connection;
import java.sql.SQLException;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.DataSource;
public class DBConnection
   public static Connection getDBConnection() throws SQLException
      Connection conn = null;
      try
         InitialContext ctx = new InitialContext();
         DataSource ds = ( DataSource ) ctx.lookup( "java:comp/env/jdbc/MySQLDB" );
         try
            conn = ds.getConnection();
         catch( SQLException e )
            System.out.println( "Open connection failure: " + e.getMessage() );
      catch( NamingException nEx )
         nEx.printStackTrace();
      return conn;

I use the connection pool feature provide by the server I use. Is this what I should do? Please confirm.
import java.sql.Connection;
import java.sql.SQLException;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.DataSource;
import javax.servlet.*;
public class CreateResources implements javax.servlet.ServletContextListener
     public void contextInitialized(ServletContextEvent sce)
          public static Connection getDBConnection() throws SQLException
               Connection conn = null;
               try
                    InitialContext ctx = new InitialContext();
                    DataSource ds = ( DataSource ) ctx.lookup( "java:comp/env/jdbc/MySQLDB" );
                    try
                         conn = ds.getConnection();
                    catch( SQLException e )
                         System.out.println( "Open connection failure: " + e.getMessage() );
              catch( NamingException nEx )
                    nEx.printStackTrace();
              return conn;
     public void contextDestroyed(ServletCotnextEvent sce)
}

How to Create a connection pool in OSB java callout

Dear Team,
In our project, we need read some data from DB, and do corresponding operation. currently, we need setup the connection first, execute the SQL, and close the connection.
But the concurrency of call is very high, is there a way to create a connection pool, then we can use the connection pool to get the connection and execute the SQL, then return the connection to the pool.
if connection pool is not available, is there any way to create the connection outside the java callout, that we can just execute the SQL in java callout.
The OSB version is 11.1.1.6.0
Thanks.
Best Regards,
Raysen Jia
Edited by: Raysen Jia on Oct 16, 2012 8:44 AM

Hi Team,
Thanks for your help.
What I need is not only the db connection, may be other kind of things, such as read configuration from file...
If I write the code in java callout with static java method to create and close the connection, each time when request come in, OSB will create a new connection (or read the file), I think it's not the best practice to do this kind of work.
I think the weblogic is running in JVM, is there any way we can define variables or new object in the JVM directly?

SBO0001 error DBD:ORA12154 error while creating new connection

Dear All,
I have installed XIR3 on a windows 64 bit with oracle 10g R2 client.
The CMS is up and running and I am able to connect to the infoview and view the lsit of all the migrated objects from BOXIR2.
But, when I am trying to create a new connection for the universe or trying to execute the existing reports i am getting the following error.
(i.e I guess BO is unable to connect to DB)
*SBO0001 error DBD:ORA12154 error while creating new connection
I tried various solution from BOB but still could not solve this. Please anyone suggest few tips regarding this case
Business objects: CMS is running and able to connect to infoview and able to log on to CMC
Database client: Able to log on to DB using sqlplus and tnsping is working.
the details of the software are as follows
*BO Server configuration
OS: Windows Server 2008 R2 64 bit
Business Objects XI R3 3.0
Oracle client 10gR2 32 bit
*Database server configuration
Oracle 11g R2 64 bit
Thanks,
Mike

Mike :
I am having a similar issue with the BOE and Oracle.
Can you please provide details of which Oracle client you ended-up using..?
32-bit or 64-bit...?
Oracle client version...?
Specific client patches applied..?
Thanks,
Mark

Error while creating OLAP connection in IDT

Hi friends,
I am facing error while creating OLAP connection in IDT (BO 4.1 sp2)
I am using sql server 2012.In the screen shots you can observe server name and user name of the Sql server
I am creating OLAP connection to connect CUBE
Check the screen shots for the error
Plz help me
Here you can see the server name and user name
While creating OLAP connection I gave these credentials
This is the error I am getting

Hi..
To create connection and access the BW data, developer must have the password. and while create connection using Authentication Mode: Single Sign On, need to loin the username has pattern <SID~client/SAP userid>,
User Name: SID~client/SAP userid
Password for the SID,
Authentication as SAP.
Plese find the below link for more info: http://scn.sap.com/community/semantic-layer/blog/2014/06/19/pre-requisite-authorizations-in-sap-bw-side-before-develop-the-universe

Problem with creating Connection pool and JNDI, driver is not detected

Hi,
I have an issue with creating Connection Pool and JNDI.
I'm using:
- JDK 1.6
- OS: Linux(ubuntu 8.10)
- Netbeans IDE 6.5.1
- Java EE 5.0
- Apache Tomcat 6.0.18 Its lib directory contains all necessary jar files for Oracle database driver
- Oracle 11g Enterprise
My problem is that the Oracle database driver is not detected when I want to create a pool (it works pretty well and is detected without any problem when I create ordinary connection by DriverManager)
Therefore after running:
InitialContext ic = new InitialContext();
Context context = (Context)ic.lookup("java:comp/env");
DataSource dataSource = (DataSource)context.lookup("jdbc/oracle11g");
Connection connection = dataSource.getConnection();and right after dataSource.getConnection() I have the following exception:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driver class 'oracle.jdbc.OracleDriver'
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1136)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)
at servlets.Servlet1.doPost(Servlet1.java:47)
at servlets.Servlet1.doGet(Servlet1.java:29)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at sun.misc.Launcher$ExtClassLoader.findClass(Launcher.java:229)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1130)
... 17 more
My application context file (context.xml) is:
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/WebApplication3">
<Resource auth="Container"
                  driverClassName="oracle.jdbc.OracleDriver"
                  maxActive="8"
                  maxIdle="4"
                  name="jdbc/oracle11g"
                  username="scott"
                  password="tiger"
                  type="javax.sql.DataSource"
                  url="jdbc:oracle:thin:@localhost:1521:database01" />
</Context>and my web.xml is:
    <resource-ref>
        <description>Oracle Datasource example</description>
        <res-ref-name>jdbc/oracle11g</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Container</res-auth>
    </resource-ref>
...I found similar threads in different forums including sun, such as
http://forums.sun.com/thread.jspa?threadID=567630&start=0&tstart=0
http://forums.sun.com/thread.jspa?threadID=639243&tstart=0
http://forums.sun.com/thread.jspa?threadID=5312178&tstart=0
, but no solution.
As many suggest, I also tried to put context directly in the server.xml (instead of my application context) and referencing it by <ResourceLink /> inside my application context but it didn't work and instead it gave me the following message:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create JDBC driver of class '   ' for connect URL 'null'
Has anyone succeeded in creating a connection pool with JNDI by using Tomcat 6 or higher ? If yes, could kindly explain about the applied method.
Regards,

Hello again,
Finally I managed to run my application also with Tomcat 6.0.18. There was only two lines that had to be modified
in the context.xml file (the context of my application project and not server's)
Instead of writing
<Context antiJARLocking="true" path="/WebApplication2">
    type="javax.sql.DataSource"
    factory="org.apache.tomcat.dbcp.dbcp.BasicDataSourceFactory"
</Context>we had to write:
<Context antiJARLocking="true" path="/WebApplication2">
    type="oracle.jdbc.pool.OracleDataSource"
    factory="oracle.jdbc.pool.OracleDataSourceFactory"
</Context>- No modification was needed to be done at server level (niether server.xml nor server context.xml)
- I just added the ojdbc6.jar in $CATALINA_HOME/lib (I didn't even need to add it in WEB-INF/lib of my project)
- The servlet used to do the test was the same that I presented in my precedent post.
For those who have encountered my problem and are interested in the format of the web.xml and context.xml
with Tomcat 6.0, you can find them below:
Oracle server: Oracle 11g Enterprise
Tomcat server version: 6.0.18
Oracle driver: ojdbc.jar
IDE: Netbeans 6.5.1
The context.xml file of the web application
<?xml version="1.0" encoding="UTF-8"?>
<Context antiJARLocking="true" path="/WebApplication2">
    <Resource name="jdbc/oracle11g"
              type="oracle.jdbc.pool.OracleDataSource"
              factory="oracle.jdbc.pool.OracleDataSourceFactory"
              url="jdbc:oracle:thin:@localhost:1521:database01"
              driverClassName="oracle.jdbc.OracleDriver"
              userName="scott"
              password="tiger"
              auth="Container"
              maxActive="100"
              maxIdle="30"
              maxWait="10000"
              logAbandoned="true"
              removeAbandoned="true"
              removeAbandonedTimeout="60" />
</Context>The web.xml of my web application
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
    <resource-ref>
        <description>Oracle Database 11g DataSource</description>
        <res-type>oracle.jdbc.pool.OracleDataSource</res-type>
        <res-auth>Container</res-auth>
        <res-ref-name>jdbc/oracle11g</res-ref-name>
    </resource-ref>
    <servlet>
        <servlet-name>Servlet1</servlet-name>
        <servlet-class>servlets.Servlet1</servlet-class>
    </servlet>
    <servlet-mapping>
        <servlet-name>Servlet1</servlet-name>
        <url-pattern>/Servlet1</url-pattern>
    </servlet-mapping>
    <session-config>
        <session-timeout>
            30
        </session-timeout>
    </session-config>
    <welcome-file-list>
        <welcome-file>index.jsp</welcome-file>
    </welcome-file-list>
</web-app>Ok, now I'm happy as the original problem is completely solved
Regards

Error in creating a connection pool (No suitable driver)

Similar Messages

Maybe you are looking for