Error in creation of function module in e.c.c 6.0
HI GURUS,
i encountered a problem while creating function module in e.c.c 6.0, the error is 'THE MAIN PROGRAM OF DOES NOT BEGIN WITH "FUNCTION-POOL". kindly help me in solving this issue.
Hi,
You need to activate the Function Group.
GO to Se80 --> Select function group from list box --> press enter --> Select you function group > Right click> Activate.
Thanks,
Sriram Ponna.
Similar Messages
-
Error with quantity field:Datasource Creation Using Function Module method
Problem with DATASOURCE Creation using Function Module method :
I have created a datasource ZSTANDARD_COST_PRICE using Function Module method . The datasource creation is successfull when I remove the quantity field from the Z table . If I dont remove the quantity field from my Z table it gives an error as "Units Field WAERS for field STPRS of datasource ZSTANDARD_COST_PRICE is hidden". I am not able to remove this error . Please someone guide.
Let me know if my explanation is not clear enough.
Thanks in advance,
Neha.
Z table definition is as below :
MATNR MATNR CHAR 18 0 Material Number
BWKEY BWKEY CHAR 4 0 Valuation area
LFGJA LFGJA NUMC 4 0 Fiscal Year of Current Period
STPRS STPRS CURR 11 2 Standard Price " Here the currency field is WAERS and table T001
PEINH PEINH DEC 5 0 Price Unit
VJSTP VJSTP CURR 11 2 Standard price in previous year
VJPEI VJPEI DEC 5 0 Price unit of previous year.
Edited by: Neha Rathi on Jan 30, 2009 3:03 PMHi,
You should add it as one of the main fields as you have added other fields and not as the currency fields...that is..it should be part of the data source and you should be able to see it in RSO2...
Also if added as i said then it will come as new field in the data source...you can either let it be there...or hide it..
also if you want to populate it then you will have to write the code for this fields as well.
Thanks
Ajeet -
Error while activating the function module
hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthikhii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta -
BAPI creation versus function module creation...
Hi,
I know the difference between BAPI and simple function module. I have also created custom function module.
But I have not worked on creation of Custom BAPIs.
Is there a much differece in creation of function module and BAPI?
If there is please throw some light on main differences or stepwise differences when I create BAPI versus function module ?
Thanks.
Regards,
Tushar.Hai Tushar
what is BAPI?
BAPI stands for Business API(Application Program Interface).
I have answered this question before..
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
Please check out this thread..
Re: bapi
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
Java Connector(JCO) can call not only BAPI's but also the function modules which are remotely enabled..
BAPI's as i said earlier are remotely enabled function modules..
Hence, JCO can call also BAPI's(n not only BAPI's as u mentioned).
Thanks & regards
Sreeni -
How to Generate Information Errors in Generic Extractor Function Module
Hi, In my Generic Extractor logic I am reaching out to an additional table to get a field. I would like to produce an informational error or red error in the process monitor if I'm unable to get the field. Is this possible? How can I generate these messages in the Extractor Function Module?
Thanks!Hi,
Please go through the below doc. It explanins each and every step of creation of generic extractor through Function module.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30aefb04-7043-2c10-8e92-941536eebc79?quicklink=index&overridelayout=true
Regards,
mahesh -
Unknown error calling a RFC Function Module in BODI
Hi all,
I am having an issue identifying the error that my batch job in BODI is giving with regards to a RFC function module call in my query. The value returned by the standard parameter 'AL_RFC_RETCODE' are square characters ( ).
At the completion of the job, the error message 'RFC CallReceive error <Function ZCT_INDSLS_SLS_TRN_INSERT: Invalid request.. Invalid request.>.' is being output.
Correct me if I'm wrong but the parameter 'AL_RFC_RETCODE' should return standard values as per the techical manual provided to undertand any errors that might occur during a RFC FM call.
Can anyone help me on this?
Best regards,
Andrew WongHi Senthil,
I think you answered your query in your question itself
The user ID and password need to be maintained in RFC destination in SM59.
Go to SM59 and then click on test connection..if it does not ask for ID and passwoed that means correct ID and password is maintained in SM59 otherwise maintain it.
Regards,
Atish -
Error when call RFC Function module in R/3
Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter -
Error while executing the function module BAPI_RE_CN_CREATE
Dear All
I was using the the function module BAPI_RE_CN_CREATE. When I am trying to execute the function module I am getting the error message u201CBusiness transaction RECN doest existu201D. While inputting the parameters for the function module I have given RECN In the input field TRANS. Requesting you to please kindly suggest.
Regards.
VaraprasadHi Varaprasad,
please try the following.
1. Create a contract manually in the system
2. Use BAPI_RE_CN_GET_DETAIL to show how the fields and structures are filled.
3. Check and change the parameters for BAPI_RE_CN_CREATE accordingly.
Hope that helps.
Regards, Franz -
Error while creating a function module
Hii Experts
I am adding a table name to the tables parameter in a already created function module, But it is giving a error : TABLES parameter is obselete
the table which I am adding is
IT_GRAPH TYPE ZTY_GRAPH ( zty_graph is a structure which i made in se11 comprising of 2 fields)
Thanx in advanceHi,
Give table parameters as:
IT_GRAPH LIKE ZTY_GRAPH,
It will give a warning, just press enter and proceed.
Thanks & Regards,
Navneeth K. -
Error while using the function module GUI_UPLOAD
Hi,
My requirement is to upload the data from .txt file into internal table.
I have given my code like this
PARAMETERS: p_fname LIKE rlgrap-filename.
data: begin of gt_string occurs 0,
record type char255,
end of gt_string.
AT SELECTION-SCREEN ON VALUE-REQUEST for p_fname.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = ' '
CHANGING
file_name = p_fname
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_fname
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = gt_string
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here I am getting dump error as 'Type conflict when calling a function module.
The function module interface allows you to specify only fields
of a particular type under "FILENAME". The field "P_FNAME" specified here has a different field type'.
What would be the reason for this error?
Can anyone help me?
Regards,
Hemasee this sample program for F4 help
*& Report ZSD_EXCEL_INT_APP
REPORT ZSD_EXCEL_INT_APP.
parameter: file_nm type localfile.
types : begin of it_tab1,
f1(20),
f2(40),
f3(20),
end of it_tab1.
data : it_tab type table of ALSMEX_TABLINE with header line,
file type rlgrap-filename.
data : it_tab2 type it_tab1 occurs 1,
wa_tab2 type it_tab1,
w_message(100) TYPE c.
at selection-screen on value-request for file_nm.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = ' '
CHANGING
file_name = file_nm
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
refresh it_tab2[].clear wa_tab2.
file = file_nm.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = file
i_begin_col = '1'
i_begin_row = '1'
i_end_col = '10'
i_end_row = '35'
tables
intern = it_tab
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at it_tab.
case it_tab-col.
when '002'.
wa_tab2-f1 = it_tab-value.
when '004'.
wa_tab2-f2 = it_tab-value.
when '008'.
wa_tab2-f3 = it_tab-value.
endcase.
at end of row.
append wa_tab2 to it_tab2.
clear wa_tab2.
endat.
endloop.
data : p_file TYPE rlgrap-filename value 'TEST3.txt'.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*--- Display error messages if any.
IF sy-subrc NE 0.
MESSAGE e001(zsd_mes).
EXIT.
ELSE.
*---Data is downloaded to the application server file path
LOOP AT it_tab2 INTO wa_tab2.
TRANSFER wa_tab2 TO p_file.
ENDLOOP.
ENDIF.
*--Close the Application server file (Mandatory).
CLOSE DATASET p_file.
loop at it_tab2 into wa_tab2.
write : / wa_tab2-f1,wa_tab2-f2,wa_tab2-f3.
endloop. -
Error message when using function module HRIQ_TESTRESULTS_CREATE
Hi,
I need your help, I'm trying to use function module HRIQ_TESTRESULTS_CREATE to create external test results, I've used this function before without subscores, now I need to create subscores, but I get the message: "Grading scale UBID applies".
The test type EXAM_UB_ING has assigned the UBID academic scale, which has a range from 1 to 677. Test type EXAM_UB_ING has 3 subtests (grammar, listening and reading) which also have the UBID academic scale assigned.
I think this isn't a customizing problem because I can create test results with subscores using the PIQST00 transaction, the error message happens just when using the function module.
I'm using this import parameters:
STUDENT:
PL: 01
OT: ST
OBJID: Student ID
TESTRESULTS_HEADER:
ISSUEDATE 08.02.2010
VALIDDATE 30.04.2010
TEST_GUID
TESTEO 50000269
TRANSEO 00000000
TESTTYPE EXAM_UB_ING
SESSIONID T1
SESSIONYEAR 2010
ENTRYDATE 08.02.2010
TESTPASSFAIL
TESTTOTRES 458
TESTSCALE_ID
TOTALPERCENT1 0,00
TOTALPERCENT2 0,00
ENTRYMODE
SUBTY
Table TESTRESULTS_SUBSCORES:
SUBTESTID GRAMMAR
SUBTESTTRES GRAMMAR
SUBT 203
SUBTESTID READING
SUBTESTTRES READING
SUBT 120
Does anybody know which could be the error? Or any other function module which I can use? (with HRIQ_TESTRESULTS_PROCESS_DATA I get the same error message).
Thanks in advance!
AraceliAraceli,
I just noticed. You are populating SUBTESTSCALE_ID in subtest result structure.That's the reason it's throwing this error. it is trying to match Scale ID from test with value in sub test result scale ID.
Prabhat Singh -
How to automate the creation of Function Module & Class Object (SE24)
Experts,
I have the requirement to automate the creation of any type of programs: ie function module (like how we normally create in SE37 together with the parameters), class object (like how we normally create in SE24 together with attribute & method), normal report (like how we did in SE38), module pool and so on.
For example. I backuped my program into a flat file (the entire source code in txt formal or HTML) through a download program and I need to upload back this flat file into another installation of SAP.
Does SAP provide any predefined FM to cater for the above cases or better still, does anyone know of any upload program which I can use for the above requirement.
Thanks in advance.Hi Kris, I can't use the transport system as these are 2 separate SAP installation in a different place. The requirement came in the form of creation of program to be able to generate FM/Class/Report on the go.
-
Error catch of a function module exception in a method
Hello,
how do you catch the error of a function module that is called from within a method. Presently the process terminates in case of an exceptions. Sy-subrc seems also not to work.
E.G.
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
client = sy-mandt
date = SOURCE_FIELDS-xxx
foreign_amount = SOURCE_FIELDS-xxx
foreign_currency = SOURCE_FIELDS-xxx
local_currency = SOURCE_FIELDS-xxx
IMPORTING
local_amount = RESULT
EXCEPTIONS
NO_RATE_FOUND = 1
OVERFLOW = 2
NO_FACTORS_FOUND = 3
NO_SPREAD_FOUND = 4
DERIVED_2_TIMES = 5
OTHERS = 6.HI,
use 'EXCEPTIONS' to catch the error happens in FM.
uncomment all your exceptions when calling FM.
and you will get the exception number in sy-subrc.
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
client = sy-mandt
date = SOURCE_FIELDS-xxx
foreign_amount = SOURCE_FIELDS-xxx
foreign_currency = SOURCE_FIELDS-xxx
local_currency = SOURCE_FIELDS-xxx
IMPORTING
local_amount = RESULT
EXCEPTIONS
NO_RATE_FOUND = 1
OVERFLOW = 2
NO_FACTORS_FOUND = 3
NO_SPREAD_FOUND = 4
DERIVED_2_TIMES = 5
OTHERS = 6.
if sy-subrc = 2.
message e000(su) 'overflow.
endif.
Regards, -
Save EAN11 field while creating POrder creation through Function module
Hi All,
I want to update EAN11 field in material master while creating Purchase Order through function module. I am using function module BAPI_PO_CREATE1 for creating purchase order. There are no structures in the PO creation FM in which EAN11 field is there. I have also tried using function module MEPO_DOC_ITEM_PROCESS for updating EAN11 field. It is not working. Please suggest some method to do that.
Note: I am receiving EAN11 through an external system by proxy.
Thanks,
ChinmayHi,
Use BAPI_MATERIAL_SAVEDATA to updat ean numbers for materials.
tables INTERNATIONALARTNOS is used to update EAN.
Regards,
Shanmugavel Chandrasekaran -
Hi
Well, i don´t know exactly were put this, but, here it is.
The estandard function module PK_ENDDAT_AUS_START_PLUS_WORKD has an error on his definition: due to the field E_ENDEDATUM has no type, when you test it on SE37, gets a dump error message.
Maybe using it directly in a program, may not happen (I didn´t tested it), but if you first need make tests, you CAN NOT!!
How notify this issue to SAP AG or to somebody of staff of programming???
Thanks in advance.
José Gabriel Martínez.you cannot test it in SE37. you have to write a small program to call this function and test it.
and the data type of the variable to be used with E_ENDEDATUM should be of type sy-datum or SCAL-DATE
Regards
Raja
Maybe you are looking for
-
Printer offline when connected to Time Capsule
I moved my HP All-In-One C4580 from my office to my home. At home, I use my Time Capsule as my primary wireless router. I have followed every step that HP tells me, in terms of removing and reinstalling the software, and still, the only way I can pri
-
I recently upgraded my IPad because I thought it was a necessary security upgrade since Apple's security was recently compromised. I did not know it was going to reconfigure my settings. I hate it the way it is now and don't know how to get it back t
-
Hello experts. I have a problem with decimal on a query that its used in a VDT. In the dev system it works fine, but when I transport it to Prod system, the decimals doesn't represent fine. An example: dev system prod system 2,50 UN
-
I updated Adobe Flash on my Mac and now my solitaire app won't open. Message just says 'unable to open' -600. I tried to reinstall Full Deck Solitaire, but the app store says it is already installed, so I can't do it that way. What should I do? T
-
Hi ! I believe that it is standard behavior for SAP to set PBXX as the last PO price (is condition record is missing for PB00). We would like to suppress this behavior i.e. we would like the user to key in the price manually every time they create a