Error with field E_ENDEDATUM, function module PK_ENDDAT_AUS_START_PLUS_WORK
Hi
Well, i don´t know exactly were put this, but, here it is.
The estandard function module PK_ENDDAT_AUS_START_PLUS_WORKD has an error on his definition: due to the field E_ENDEDATUM has no type, when you test it on SE37, gets a dump error message.
Maybe using it directly in a program, may not happen (I didn´t tested it), but if you first need make tests, you CAN NOT!!
How notify this issue to SAP AG or to somebody of staff of programming???
Thanks in advance.
José Gabriel Martínez.
you cannot test it in SE37. you have to write a small program to call this function and test it.
and the data type of the variable to be used with E_ENDEDATUM should be of type sy-datum or SCAL-DATE
Regards
Raja
Similar Messages
-
Error while activating the function module
hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthikhii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta -
Communication error with the LOCAL_EXEC Function BAPI_PTMGREXTATTABS_CHECK
Hello,
We use timesheet (CATS) in a separate SAP system from the SAP system in which HR resides.
I found out how the loosely coupled scenario with CATS works with a SAP HR system. We transfer the workschedule and absence data with report RPTIMEOVERVIEW_REPLICATE to the SAP system in which CATS is used. This data is then available in the PTIMEOV1 table to perform time checks in CATS. The distribution model for ALE takes care of the fact that the data is posted into table PTIMEOV1. With BD97 I set up that the BAPI: PTMGREXTATTABS.CHECK has RFCdestination for synchronous calls = LOCAL_EXEC.
When I want to record on an attendance code without clock times then the above works fine. The SAP system in which CATS resides looks into table PTIMEOV1. So far so good.
However, when I want to record hours WITH clock times then I cannot save the data. The error message HRTIM00CATS667 shows up:
"Communication error with the LOCAL_EXEC Function BAPI_PTMGREXTATTABS_CHECK is no t available system"
Diagnosis
An error has occured during communication with the HR System. The HR data in the time sheet cannot be validated.
From the error message description it seems that it wants to check the SAP HR system instead of looking for the check in the SAP system in which CATS resides.....
When I change the value from LOCAL_EXEC to the system in which HR resides then the error disappears, but then it really checks into the SAP HR system (synchronous check with that SAP HR system) and that is not what the customer wants. The check should be local on the PTIMEOV1 table (in case the SAP HR system is down).
I did not find any OSS notes on the topic....or other info on SDN.
Can anyone help me out concerning this starnge error message, at least for me?
Thanks very much in advance,
Kind regards,
Mirko"A point to add"
I just noticed that following message is being continously receiving in the database alert_log:
Sat Oct 9 16:04:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:05:32 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:06:30 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:07:10 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:09:35 2010
Incremental checkpoint up to RBA [0x1d.1f9928.0], current log tail at RBA [0x1d.1f9a79.0]
Sat Oct 9 16:11:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:29:40 2010
Incremental checkpoint up to RBA [0x1d.1f9b87.0], current log tail at RBA [0x1d.1f9bf4.0]
~
Please help. -
Error with the FIELD CAT function module.
Hi folks,
This was the error message i had got from the FIELDCAT function module.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_READ_SRC_LINE_TOO_LONG', was
not caught in
procedure "K_KKB_FIELDCAT_MERGE" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
There was an attempt to read program "/A1SSPC/ITP_SCH_REP" from the database.
The READ REPORT statement allows you to copy a program text into an
internal table. The occupied line length in the program text must not
exceed the width of the internal table.
The internal table "\FUNCTION=K_KKB_FIELDCAT_MERGE\DATA=???" is 72 characters
wide. The program line is
204 characters wide.
Reg,
HariharanYou can do this
TYPE-POOLS:slis.
DATA: it_vabp TYPE STANDARD TABLE OF vbap WITH HEADER LINE.
DATA: it_fieldcat TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'IT_VBAP'
i_inclname = sy-repid
CHANGING
ct_fieldcat = it_fieldcat
* EXCEPTIONS
* INCONSISTENT_INTERFACE = 1
* PROGRAM_ERROR = 2 -
Error while using the function module GUI_UPLOAD
Hi,
My requirement is to upload the data from .txt file into internal table.
I have given my code like this
PARAMETERS: p_fname LIKE rlgrap-filename.
data: begin of gt_string occurs 0,
record type char255,
end of gt_string.
AT SELECTION-SCREEN ON VALUE-REQUEST for p_fname.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = ' '
CHANGING
file_name = p_fname
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_fname
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = gt_string
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here I am getting dump error as 'Type conflict when calling a function module.
The function module interface allows you to specify only fields
of a particular type under "FILENAME". The field "P_FNAME" specified here has a different field type'.
What would be the reason for this error?
Can anyone help me?
Regards,
Hemasee this sample program for F4 help
*& Report ZSD_EXCEL_INT_APP
REPORT ZSD_EXCEL_INT_APP.
parameter: file_nm type localfile.
types : begin of it_tab1,
f1(20),
f2(40),
f3(20),
end of it_tab1.
data : it_tab type table of ALSMEX_TABLINE with header line,
file type rlgrap-filename.
data : it_tab2 type it_tab1 occurs 1,
wa_tab2 type it_tab1,
w_message(100) TYPE c.
at selection-screen on value-request for file_nm.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = ' '
CHANGING
file_name = file_nm
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
refresh it_tab2[].clear wa_tab2.
file = file_nm.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = file
i_begin_col = '1'
i_begin_row = '1'
i_end_col = '10'
i_end_row = '35'
tables
intern = it_tab
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at it_tab.
case it_tab-col.
when '002'.
wa_tab2-f1 = it_tab-value.
when '004'.
wa_tab2-f2 = it_tab-value.
when '008'.
wa_tab2-f3 = it_tab-value.
endcase.
at end of row.
append wa_tab2 to it_tab2.
clear wa_tab2.
endat.
endloop.
data : p_file TYPE rlgrap-filename value 'TEST3.txt'.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*--- Display error messages if any.
IF sy-subrc NE 0.
MESSAGE e001(zsd_mes).
EXIT.
ELSE.
*---Data is downloaded to the application server file path
LOOP AT it_tab2 INTO wa_tab2.
TRANSFER wa_tab2 TO p_file.
ENDLOOP.
ENDIF.
*--Close the Application server file (Mandatory).
CLOSE DATASET p_file.
loop at it_tab2 into wa_tab2.
write : / wa_tab2-f1,wa_tab2-f2,wa_tab2-f3.
endloop. -
Issue with Delta in Function Module
Hi Team,
I have an issue with delta in Genric extraction using function module.Full load is working fine and i have taken post_date as delta field.plz chk the code if any delta related statements are missing.
FUNCTION ZRSAX_BIW_MANGEMENT_RAT .
""Local interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZQMBW_FUJ_MANAGEMENT OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
Example: DataSource for table MANAGEMENT RATING
TABLES: ZQMBW_MANAGEMENT.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
S_CURSOR TYPE CURSOR.
RANGES: POST_DATE FOR ZMMTVEND_RATING-POST_DATE,
VENDOR FOR ZMMTVEND_RATING-VENDOR.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
CASE I_DSOURCE.
WHEN 'ZQMMANAGEMENT_DS'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
LOG_WRITE 'E' "message type
'R3' "message class
'009' "message number
I_DSOURCE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
S_S_IF-REQUNR = I_REQUNR.
S_S_IF-DSOURCE = I_DSOURCE.
S_S_IF-MAXSIZE = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE. "Initialization mode or data extraction ?
IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'VENDOR'.
MOVE-CORRESPONDING L_S_SELECT TO VENDOR.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = VENDOR-LOW
IMPORTING
OUTPUT = VENDOR-LOW.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = VENDOR-HIGH
IMPORTING
OUTPUT = VENDOR-HIGH.
APPEND VENDOR.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'POST_DATE'.
MOVE-CORRESPONDING L_S_SELECT TO POST_DATE.
CONCATENATE L_S_SELECT-LOW6(4) L_S_SELECT-LOW3(2) L_S_SELECT-LOW+0(2) INTO POST_DATE-LOW.
CONCATENATE L_S_SELECT-HIGH6(4) L_S_SELECT-HIGH3(2) L_S_SELECT-HIGH+0(2) INTO POST_DATE-HIGH.
APPEND POST_DATE.
ENDLOOP.
**Get Management rating details
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT VENDOR POST_DATE OVERALL_MNGT_RAT OVERALL_DEV_RAT FROM ZMMTVEND_RATING WHERE VENDOR IN VENDOR AND POST_DATE IN POST_DATE .
ENDIF.
Fetch records into interface table.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
IF SY-SUBRC <> 0.
CLOSE CURSOR S_CURSOR.
RAISE NO_MORE_DATA.
ENDIF.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.Hi
Check URLs:
How to populate the ranges using FM for the SELECTs
Re: Generic Delta Function Module -
Issue with the RFC function module - parameters
Hi,
When i am creating RFC enabled function module, it was throwing an error like <b>'Reference parameters are not allowed with RFC'.</b>. I am implementing the test scenario to create BAPI, for that i have created table with 2 fields. My main intension is through RFC enabled function module planning to update the ztable.
When i was creating RFC enabled function module, it was giving error. I remembered that i need to use new structure when i create RFC enabled function module, so even i created structure also with the same fields of table fields.
can you please let me know the solution for this.
Thanks
jayaHi Ferry,
Your solution is perfect. can you please explain the below information...
Call by value
You pass the parameter with values. This means that the parameter
contents are copied both when the parameter is passed and when it is
transferred back to the calling parameter. For structures that contain
tables, performance may be reduced considerably. Therefore, you should
not do this.
I created the parameters with reference to table-fields, what do you mean by 'Call by value'check box usage there.
Is it mean ...if i change the contents of the field in FM will it pass back to the structure which i refered to this parameter, in this case its table-field.
Thanks
jaya -
Run time error due to custom function module in a program
Hi,
I have created one program using custom function module ZIN_COMEV_CUSTDETAILNOTIF_OUT .The program is showing runtime error
"Incorrect parameter with CALL FUNCTION."
I have tested the FM using same set of parameter as in program it is working.It is throwing error while executing in program help.
Regards
DattaHello Nagraj or harish
I think you may be right.There is date field in my function module ,when I am testing function module I am giving it as
Y_DATE = 01.01.2011,but in program the field is DATS type and I have to give 20110101.If this is the problem how I can solve it.
CALL FUNCTION 'ZIN_COMEV_CUSTDETAILNOTIF_OUT'
EXPORTING
Y_SENDER = gv_g_sender
Y_RECEIVER = gv_g_reciever
Y_PARTNER = GV_V_PARTNER
Y_BASIC_PROCESS = GC_BASIC_PROCESS
Y_SWITCHNUM =
Y_SEN_LOAD =
Y_INTUI = GV_V_INTUI
Y_TRANSACTIONID =
Y_DATE = GV_V_DATE -
Problem with IDOC inbound function module
hi
While excecuting the inbound function module in WE19
I am getting error (short dump)
Incorrect parameter with Call transaction.Creating a Function Module (Direct Inbound Processing)
This step describes how to create a function module which is identified by the IDoc Interface using a new process code and called from ALE (field TBD52-FUNCNAME). Direct inbound processing using a function module (not using a workflow) always includes the ALE layer. This setting (processing with function module and ALE layer) is identified by the value 6 in the field TEDE2-EDIVRS, which is read by the function module IDOC_START_INBOUND. IDOC_START_INBOUND then calls ALE.
Prerequisites
You must have completed the required steps in Defining and Using a Basic Type .
Procedure
Choose Tools ® ABAP Workbench ® Development ® Function Builder, and create a new function module.
Create the segments as global data in your function group. The function module should copy the application data from the segments into the corresponding application tables and modify the IDoc status accordingly. If an error occurs, the function module must set the corresponding workflow parameters for exception handling.
Activate the function module: From the initial screen of the Function Builder select .
In the example, create the function module IDOC_INPUT_TESTER with a global interface. The function module is called when an IDoc of type TESTER01 is received for inbound processing. You will assign an application object ("standard order") to this IDoc type and therefore maintain tables from SD. To do this, call transaction VA01 using the command CALL TRANSACTION. Please note that the intention here is not to simulate a realistic standard order, but only to illustrate how data reaches application tables from an IDoc table via segment structures (form routine READ_IDOC_TESTER) and how the function module triggers an event for exception handling (by returning suitable return variables to the ALE layer in the FORM routine RETURN_VARIABLES_FILL).
A comprehensive example of the code for an inbound function module is provided in the ALE documentation in the SAP Library under Example Program to Generate an IDoc. This function module, for example, also checks whether the logical message is correct and calls a (fictitious) second function module which first writes the application data and then returns the number of the generated document. In addition, status 53 is only set if the application document was posted correctly.
Administration parameters for IDOC_INPUT_TESTER
Application abbreviation
V (Sales and Distribution)
Processing type
Normal, start immediately
Interface for IDOC_INPUT_TESTER (global interface)
Formal parameters
Reference structure
Explanation
Import parameters
INPUT_METHOD
BDWFAP_PAR-INPUTMETHD
Describes how the function module is to be processed (example: in the background)
MASS_PROCESSING
BDWFAP_PAR-MASS_PROC
Mass inbound processing? (indicator)
Export parameters
WORKFLOW_RESULT
BDWFAP_PAR-RESULT
Set to 99999 if an event is to be triggered for error handling.
APPLICATION_VARIABLE
BDWFAP_PAR-APPL_VAR
Variable freely available from application for workflow
IN_UPDATE_TASK
BDWFAP_PAR-UPDATETASK
Asynchronous update? (indicator is not set in example)
CALL_TRANSACTION_DONE
BDWFAP_PAR-CALLTRANS
Transaction called? (indicator is not set in example)
Table
IDOC_CONTRL
EDIDC
IDoc control record
IDOC_DATA
EDIDD
IDoc data records
IDOC_STATUS
BDIDOCSTAT
IDoc status records for ALE
RETURN_VARIABLES
BDWFRETVAR
IDoc assigned to Object type method parameters.
SERIALIZATION_INFO
BDI_SER
If several IDocs are to be processed in a certain sequence: this structure contains the necessary information
Example
FUNCTION IDOC_INPUT_TESTER.
""Globale Schnittstelle:
*" IMPORTING
*" VALUE(INPUT_METHOD) LIKE BDWFAP_PAR-INPUTMETHD
*" VALUE(MASS_PROCESSING) LIKE BDWFAP_PAR-MASS_PROC
*" EXPORTING
*" VALUE(WORKFLOW_RESULT) LIKE BDWFAP_PAR-RESULT
*" VALUE(APPLICATION_VARIABLE) LIKE BDWFAP_PAR-APPL_VAR
*" VALUE(IN_UPDATE_TASK) LIKE BDWFAP_PAR-UPDATETASK
*" VALUE(CALL_TRANSACTION_DONE) LIKE BDWFAP_PAR-CALLTRANS
*" TABLES
*" IDOC_CONTRL STRUCTURE EDIDC OPTIONAL
*" IDOC_DATA STRUCTURE EDIDD
*" IDOC_STATUS STRUCTURE BDIDOCSTAT
*" RETURN_VARIABLES STRUCTURE BDWFRETVAR
*" SERIALIZATION_INFO STRUCTURE BDI_SER
initialize SET/GET Parameter and internal tables
PERFORM INITIALIZE_ORGANIZATIONAL_DATA.
Move IDOC to internal tables of application
PERFORM READ_IDOC_TESTER.
call transaction Order Entry VA01
PERFORM CALL_VA01_IDOC_ORDERS USING ERRORCODE.
set status value
perform write_status_record using errorcode.
return values of function module
PERFORM RETURN_VARIABLES_FILL USING ERRORCODE.
ENDFUNCTION.
FORM INITIALIZE_ORGANIZATIONAL_DATA.
initialize SET/GET parameters
SET PARAMETER ID 'VKO' FIELD SPACE.
SET PARAMETER ID 'VTW' FIELD SPACE.
SET PARAMETER ID 'SPA' FIELD SPACE.
SET PARAMETER ID 'VKB' FIELD SPACE.
SET PARAMETER ID 'VKG' FIELD SPACE.
initialize internal tables
REFRESH BDCDATA.
CLEAR BDCDATA.
CLEAR BELEGNUMMER.
CLEAR ERRTAB.
REFRESH ERRTAB.
REFRESH XBDCMSGCOLL.
CLEAR XBDCMSGCOLL.
ENDFORM. " INITIALIZE_ORGANIZATIONAL_DATA
FORM READ_IDOC_TESTER.
PERFORM INITIALIZE_IDOC.
LOOP AT IDOC_DATA
WHERE DOCNUM = IDOC_CONTRL-DOCNUM.
CASE IDOC_DATA-SEGNAM.
header data
WHEN 'E1HEAD'.
MOVE IDOC_DATA-SDATA TO E1HEAD.
PERFORM PROCESS_SEGMENT_E1HEAD.
position data
WHEN 'E1ITEM'.
MOVE IDOC_DATA-SDATA TO E1ITEM.
PERFORM PROCESS_SEGMENT_E1ITEM.
ENDCASE.
ENDLOOP.
only when there were one or more items
CHECK FIRST NE 'X'.
APPEND XVBAP. "last one
ENDFORM. " READ_IDOC_TESTER
FORM INITIALIZE_IDOC.
CLEAR XVBAK.
REFRESH XVBAP.
CLEAR XVBAP.
POSNR = 0.
FIRST = 'X'.
ENDFORM. " INITIALIZE_IDOC
FORM PROCESS_SEGMENT_E1HEAD.
requested date of delivery
WLDAT = E1HEAD-WLDAT.
delivery date
XVBAK-BSTDK = E1HEAD-BSTDK.
customer number
XVBAK-KUNNR = E1HEAD-AUGEB.
order number
XVBAK-BSTNK = E1HEAD-BELNR.
division
XVBAK-SPART = E1HEAD-SPART.
distribution channel
XVBAK-VTWEG = E1HEAD-VTWEG.
sales organization
XVBAK-VKORG = E1HEAD-VKORG.
order type
XVBAK-AUART = E1HEAD-AUART.
do not fill incoterms (inco1, inco2)
customer function
CALL CUSTOMER-FUNCTION '001'
EXPORTING
PI_VBAK621 = XVBAK
IMPORTING
PE_VBAK621 = XVBAK
TABLES
PT_IDOC_DATA_RECORDS = IDOC_DATA.
ENDFORM. " PROCESS_SEGMENT_E1HEAD
FORM PROCESS_SEGMENT_E1ITEM.
position number
XVBAP-POSNR = XVBAP-POSNR + 1.
amount
XVBAP-WMENG = E1ITEM-MENGE.
unit
CALL FUNCTION 'ISO_TO_SAP_MEASURE_UNIT_CODE'
EXPORTING
ISO_CODE = E1ITEM-BMEINH
IMPORTING
SAP_CODE = XVBAP-VRKME
EXCEPTIONS
OTHERS = 0.
material number
XVBAP-MATNR = E1ITEM-LMATNR.
CALL CUSTOMER-FUNCTION '002'
EXPORTING
PI_VBAP621 = XVBAP
IMPORTING
PE_VBAP621 = XVBAP
TABLES
PT_IDOC_DATA_RECORDS = IDOC_DATA.
APPEND XVBAP.
ENDFORM. " PROCESS_SEGMENT_E1ITEM
FORM CALL_VA01_IDOC_ORDERS USING ERRORCODE.
call transaction first dynpro
PERFORM DYNPRO_START.
call transaction double-line entry
PERFORM DYNPRO_DETAIL2.
incoterms
PERFORM DYNPRO_HEAD_300.
call transaction item datas
PERFORM DYNPRO_POSITION.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'SICH'.
determine input method
IF INPUT_METHOD IS INITIAL.
INPUT_METHOD = 'N'.
ENDIF.
call transaction VA01
CALL TRANSACTION 'VA01' USING BDCDATA
MODE INPUT_METHOD
UPDATE 'S'
MESSAGES INTO XBDCMSGCOLL.
errorcode = SY-SUBRC. " remember returncode for status update
ENDFORM. " CALL_VA01_IDOC_ORDERS
form write_status_record using errorcode.
FILL IDOC_STATUS
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IF ERRORCODE = 0.
IDOC_STATUS-STATUS = BELEG_GEBUCHT. "value 53
GET PARAMETER ID 'AUN' FIELD BELEGNUMMER.
IDOC_STATUS-MSGID = 'V1'.
IDOC_STATUS-MSGNO = '311'.
IDOC_STATUS-MSGV1 = 'Terminauftrag'.
IDOC_STATUS-MSGV2 = BELEGNUMMER.
ELSE.
IDOC_STATUS-STATUS = BELEG_NICHT_GEBUCHT. "value 51
IDOC_STATUS-MSGID = SY-MSwGID.
IDOC_STATUS-MSGNO = SY-MSGNO.
IDOC_STATUS-MSGV1 = SY-MSGV1.
IDOC_STATUS-MSGV2 = SY-MSGV2.
IDOC_STATUS-MSGV3 = SY-MSGV3.
IDOC_STATUS-MSGV4 = SY-MSGV4.
ENDIF.
APPEND IDOC_STATUS.
ENDFORM.
FORM DYNPRO_START.
PERFORM DYNPRO_NEW USING PROGRAMM_AUFTRAG
DYNPRO-EINSTIEG
CHANGING LAST_DYNPRO.
ordertype
PERFORM DYNPRO_SET USING 'VBAK-AUART' XVBAK-AUART.
sales organization
PERFORM DYNPRO_SET USING 'VBAK-VKORG' XVBAK-VKORG.
Distribution channel
PERFORM DYNPRO_SET USING 'VBAK-VTWEG' XVBAK-VTWEG.
Division
PERFORM DYNPRO_SET USING 'VBAK-SPART' XVBAK-SPART.
Sales office
PERFORM DYNPRO_SET USING 'VBAK-VKBUR' XVBAK-VKBUR.
Sales group
PERFORM DYNPRO_SET USING 'VBAK-VKGRP' XVBAK-VKGRP.
ENDFORM. " DYNPRO_START
FORM DYNPRO_NEW USING PROGNAME
DYNPRONR
CHANGING LAST_DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGNAME.
BDCDATA-DYNPRO = DYNPRONR.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
LAST_DYNPRO = DYNPRONR.
ENDFORM. " DYNPRO_NEW
FORM DYNPRO_SET USING FELDNAME
FELDINHALT.
CLEAR BDCDATA.
CHECK FELDINHALT NE SPACE.
dynpro field name
BDCDATA-FNAM = FELDNAME.
contents
BDCDATA-FVAL = FELDINHALT.
APPEND BDCDATA.
ENDFORM. " DYNPRO_SET
FORM DYNPRO_DETAIL2.
okcode
PERFORM DYNPRO_SET USING 'BDC_OKCODE' PANEL-UER2.
fix dynpro number 4001
PERFORM DYNPRO_NEW USING PROGRAMM_AUFTRAG
'4001'
CHANGING LAST_DYNPRO.
order party
PERFORM DYNPRO_SET USING 'KUAGV-KUNNR' XVBAK-KUNNR.
purchase order number
PERFORM DYNPRO_SET USING 'VBKD-BSTKD' XVBAK-BSTNK.
requested delivery date
PERFORM DYNPRO_DATE_SET USING 'VBKD-BSTDK' XVBAK-BSTDK.
purchase order date
PERFORM DYNPRO_DATE_SET USING 'RV45A-KETDAT' WLDAT.
ENDFORM. " DYNPRO_DETAIL2
FORM DYNPRO_DATE_SET USING FELDNAME
FELDINHALT.
DATA: DATE TYPE D.
CLEAR BDCDATA.
CHECK FELDINHALT NE SPACE.
BDCDATA-FNAM = FELDNAME.
WRITE FELDINHALT TO DATE.
BDCDATA-FVAL = DATE.
APPEND BDCDATA.
ENDFORM. " DYNPRO_DATE_SET
FORM DYNPRO_HEAD_300.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' PANEL-KKAU.
incoterms part 1
IF NOT XVBAK-INCO1 IS INITIAL.
PERFORM DYNPRO_SET USING 'VBKD-INCO1' XVBAK-INCO1.
ENDIF.
incoterms part 2
IF NOT XVBAK-INCO2 IS INITIAL.
PERFORM DYNPRO_SET USING 'VBKD-INCO2' XVBAK-INCO2.
ENDIF.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'BACK'.
ENDFORM. " DYNPRO_HEAD_300
FORM DYNPRO_POSITION.
LOOP AT XVBAP.
dynpro item double line entry
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'UER2'.
IF XVBAP-POSNR = 1.
material number
PERFORM DYNPRO_SET USING 'VBAP-MATNR(01)' XVBAP-MATNR.
order quantity
PERFORM DYNPRO_SET USING 'RV45A-KWMENG(01)' XVBAP-WMENG.
desired delivery date
PERFORM DYNPRO_DATE_SET USING 'RV45A-ETDAT(1)' WLDAT.
sales unit
PERFORM DYNPRO_SET USING 'VBAP-VRKME(1)' XVBAP-VRKME.
ELSE.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'POAN'.
material number
PERFORM DYNPRO_SET USING 'VBAP-MATNR(02)' XVBAP-MATNR.
order quantity
PERFORM DYNPRO_SET USING 'RV45A-KWMENG(02)' XVBAP-WMENG.
desired delivery date
PERFORM DYNPRO_DATE_SET USING 'RV45A-ETDAT(02)' WLDAT.
sales unit
PERFORM DYNPRO_SET USING 'VBAP-VRKME(02)' XVBAP-VRKME.
ENDIF.
ENDLOOP.
ENDFORM. " DYNPRO_POSITION
FORM RETURN_VARIABLES_FILL USING ERRORCODE.
allocate IDOC numbers to Workflow output parameters
IF MASS_PROCESSING <> SPACE.
IF ERRORCODE = 0.
RETURN_VARIABLES-WF_PARAM = PID.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
RETURN_VARIABLES-WF_PARAM = APO.
RETURN_VARIABLES-DOC_NUMBER = BELEGNUMMER.
APPEND RETURN_VARIABLES.
WORKFLOW_RESULT = C_WF_RESULT_OK.
ELSE.
RETURN_VARIABLES-WF_PARAM = EID.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
WORKFLOW_RESULT = C_WF_RESULT_ERROR.
ENDIF.
ELSE.
IF ERRORCODE = 0.
RETURN_VARIABLES-WF_PARAM = APE.
RETURN_VARIABLES-DOC_NUMBER = BELEGNUMMER.
APPEND RETURN_VARIABLES.
WORKFLOW_RESULT = C_WF_RESULT_OK.
ELSE.
WORKFLOW_RESULT = C_WF_RESULT_ERROR.
ENDIF.
ENDIF.
ENDFORM. " RETURN_VARIABLES_FILL
Globale Daten von IDOC_INPUT_TESTER
TABLES: E1HEAD, E1ITEM.
DATA: BEGIN OF BDCDATA OCCURS 500.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
DATA: BEGIN OF XVBAK. "Kopfdaten
INCLUDE STRUCTURE VBAK621.
DATA: END OF XVBAK.
DATA: BEGIN OF XVBAP OCCURS 50. "Position
INCLUDE STRUCTURE VBAP.
DATA: WMENG(18) TYPE C.
DATA: LFDAT LIKE VBAP-ABDAT.
DATA: KSCHL LIKE KOMV-KSCHL.
DATA: KBTRG(16) TYPE C.
DATA: KSCHL_NETWR LIKE KOMV-KSCHL.
DATA: KBTRG_NETWR(16) TYPE C.
DATA: INCO1 LIKE VBKD-INCO1.
DATA: INCO2 LIKE VBKD-INCO2.
DATA: YANTLF(1) TYPE C.
DATA: PRSDT LIKE VBKD-PRSDT.
DATA: HPRSFD LIKE TVAP-PRSFD.
DATA: END OF XVBAP.
DATA: BEGIN OF DYNPRO,
EINSTIEG LIKE T185V-DYNNR VALUE 101,
KKAU LIKE T185V-DYNNR,
UER2 LIKE T185V-DYNNR,
KBES LIKE T185V-DYNNR,
ERF1 LIKE T185V-DYNNR,
PBES LIKE T185V-DYNNR,
PKAU LIKE T185V-DYNNR,
PEIN LIKE T185V-DYNNR,
EID1 LIKE T185V-DYNNR,
POPO LIKE T185V-DYNNR,
EIPO LIKE T185V-DYNNR,
KPAR LIKE T185V-DYNNR,
PSDE LIKE T185V-DYNNR,
PPAR LIKE T185V-DYNNR,
KDE1 LIKE T185V-DYNNR,
KDE2 LIKE T185V-DYNNR,
PDE1 LIKE T185V-DYNNR,
PDE2 LIKE T185V-DYNNR,
PKON LIKE T185V-DYNNR,
END OF DYNPRO.
DATA: BEGIN OF PANEL,
KKAU LIKE T185V-PANEL VALUE 'KKAU',
UER2 LIKE T185V-PANEL VALUE 'UER2',
KBES LIKE T185V-PANEL VALUE 'KBES',
ERF1 LIKE T185V-PANEL VALUE 'ERF1',
PBES LIKE T185V-PANEL VALUE 'PBES',
PKAU LIKE T185V-PANEL VALUE 'PKAU',
PEIN LIKE T185V-PANEL VALUE 'PEIN',
EID1 LIKE T185V-PANEL VALUE 'EID1',
EIAN LIKE T185V-PANEL VALUE 'EIAN',
POPO LIKE T185V-PANEL VALUE 'POPO',
EIPO LIKE T185V-PANEL VALUE 'EIPO',
KPAR LIKE T185V-PANEL VALUE 'KPAR',
PSDE LIKE T185V-PANEL VALUE 'PSDE',
POAN LIKE T185V-PANEL VALUE 'POAN',
PPAR LIKE T185V-PANEL VALUE 'PPAR',
KDE1 LIKE T185V-PANEL VALUE 'KDE1',
KDE2 LIKE T185V-PANEL VALUE 'KDE2',
PDE1 LIKE T185V-PANEL VALUE 'PDE1',
PDE2 LIKE T185V-PANEL VALUE 'PDE2',
PKON LIKE T185V-PANEL VALUE 'PKON',
KOAN LIKE T185V-PANEL VALUE 'KOAN',
END OF PANEL.
DATA: BEGIN OF ERRTAB OCCURS 20,
TRANS LIKE TSTC-TCODE,
ARBGB LIKE T100-ARBGB,
CLASS(1) TYPE C,
MSGNR LIKE T100-MSGNR,
TEXT LIKE T100-TEXT,
TEXT(123) TYPE C,
MSGV1 LIKE SY-MSGV1,
MSGV2 LIKE SY-MSGV2,
MSGV3 LIKE SY-MSGV3,
MSGV4 LIKE SY-MSGV4,
END OF ERRTAB.
*---- Hilfsfelder -
DATA: PROGRAMM_AUFTRAG LIKE T185V-AGIDV VALUE 'SAPMV45A'.
DATA: LAST_DYNPRO LIKE T185V-DYNNR,
WLDAT LIKE VBAK-BSTDK,
POSNR LIKE VBAP-POSNR,
FIRST(1) TYPE C VALUE 'X'.
DATA: BEGIN OF XBDCMSGCOLL OCCURS 10.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF XBDCMSGCOLL.
Terminauftrag ( Auftragsart wird fest gesetzt !)
DATA: BELEGNUMMER LIKE VBAK-VBELN.
DATA: ERRORCODE LIKE SY-SUBRC.
Statuswerte fuer IDOC-Status
DATA: BELEG_NICHT_GEBUCHT LIKE TEDS1-STATUS VALUE '51'.
DATA: BELEG_GEBUCHT LIKE TEDS1-STATUS VALUE '53'.
*- Direktwerte für Return_variables -
data:
eid like bdwfretvar-wf_param value 'Error_IDOCs',
pid like bdwfretvar-wf_param value 'Processed_IDOCs',
apo like bdwfretvar-wf_param value 'Appl_Objects',
ape like bdwfretvar-wf_param value 'Appl_Object'.
*- Direktwerte für Workflow_Result -
DATA: C_WF_RESULT_ERROR LIKE BDWFAP_PAR-RESULT VALUE '99999'.
DATA: C_WF_RESULT_OK LIKE BDWFAP_PAR-RESULT VALUE '0'. -
Error in creation of function module in e.c.c 6.0
HI GURUS,
i encountered a problem while creating function module in e.c.c 6.0, the error is 'THE MAIN PROGRAM OF DOES NOT BEGIN WITH "FUNCTION-POOL". kindly help me in solving this issue.Hi,
You need to activate the Function Group.
GO to Se80 --> Select function group from list box --> press enter --> Select you function group > Right click> Activate.
Thanks,
Sriram Ponna. -
Unknown error calling a RFC Function Module in BODI
Hi all,
I am having an issue identifying the error that my batch job in BODI is giving with regards to a RFC function module call in my query. The value returned by the standard parameter 'AL_RFC_RETCODE' are square characters ( ).
At the completion of the job, the error message 'RFC CallReceive error <Function ZCT_INDSLS_SLS_TRN_INSERT: Invalid request.. Invalid request.>.' is being output.
Correct me if I'm wrong but the parameter 'AL_RFC_RETCODE' should return standard values as per the techical manual provided to undertand any errors that might occur during a RFC FM call.
Can anyone help me on this?
Best regards,
Andrew WongHi Senthil,
I think you answered your query in your question itself
The user ID and password need to be maintained in RFC destination in SM59.
Go to SM59 and then click on test connection..if it does not ask for ID and passwoed that means correct ID and password is maintained in SM59 otherwise maintain it.
Regards,
Atish -
Error when call RFC Function module in R/3
Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter -
Error while executing the function module BAPI_RE_CN_CREATE
Dear All
I was using the the function module BAPI_RE_CN_CREATE. When I am trying to execute the function module I am getting the error message u201CBusiness transaction RECN doest existu201D. While inputting the parameters for the function module I have given RECN In the input field TRANS. Requesting you to please kindly suggest.
Regards.
VaraprasadHi Varaprasad,
please try the following.
1. Create a contract manually in the system
2. Use BAPI_RE_CN_GET_DETAIL to show how the fields and structures are filled.
3. Check and change the parameters for BAPI_RE_CN_CREATE accordingly.
Hope that helps.
Regards, Franz -
Error while creating a function module
Hii Experts
I am adding a table name to the tables parameter in a already created function module, But it is giving a error : TABLES parameter is obselete
the table which I am adding is
IT_GRAPH TYPE ZTY_GRAPH ( zty_graph is a structure which i made in se11 comprising of 2 fields)
Thanx in advanceHi,
Give table parameters as:
IT_GRAPH LIKE ZTY_GRAPH,
It will give a warning, just press enter and proceed.
Thanks & Regards,
Navneeth K. -
Error message when using function module HRIQ_TESTRESULTS_CREATE
Hi,
I need your help, I'm trying to use function module HRIQ_TESTRESULTS_CREATE to create external test results, I've used this function before without subscores, now I need to create subscores, but I get the message: "Grading scale UBID applies".
The test type EXAM_UB_ING has assigned the UBID academic scale, which has a range from 1 to 677. Test type EXAM_UB_ING has 3 subtests (grammar, listening and reading) which also have the UBID academic scale assigned.
I think this isn't a customizing problem because I can create test results with subscores using the PIQST00 transaction, the error message happens just when using the function module.
I'm using this import parameters:
STUDENT:
PL: 01
OT: ST
OBJID: Student ID
TESTRESULTS_HEADER:
ISSUEDATE 08.02.2010
VALIDDATE 30.04.2010
TEST_GUID
TESTEO 50000269
TRANSEO 00000000
TESTTYPE EXAM_UB_ING
SESSIONID T1
SESSIONYEAR 2010
ENTRYDATE 08.02.2010
TESTPASSFAIL
TESTTOTRES 458
TESTSCALE_ID
TOTALPERCENT1 0,00
TOTALPERCENT2 0,00
ENTRYMODE
SUBTY
Table TESTRESULTS_SUBSCORES:
SUBTESTID GRAMMAR
SUBTESTTRES GRAMMAR
SUBT 203
SUBTESTID READING
SUBTESTTRES READING
SUBT 120
Does anybody know which could be the error? Or any other function module which I can use? (with HRIQ_TESTRESULTS_PROCESS_DATA I get the same error message).
Thanks in advance!
AraceliAraceli,
I just noticed. You are populating SUBTESTSCALE_ID in subtest result structure.That's the reason it's throwing this error. it is trying to match Scale ID from test with value in sub test result scale ID.
Prabhat Singh
Maybe you are looking for
-
Need Help on List of Months between Two Dates
Hello everyone, I have a table which has startdate & enddate, and need a SELECT statement to list all months between these two dates for each given ID. I did some test, and could not figure out how to get the startdate & enddate from testing table (i
-
Hand made or generated GUI code, what do proffesional use?
Hello! I am currious about what programs people that work as a programmer use? Is it common that they use programs that generats code like Netbeens for instance? I tryed that program in design mode to make a gui, but when I looked at the code it had
-
BAPI TO CREATE BUSINESS PARTNER NUMBER
Hi, I am using BAPI_BUPA_CREATE_FROM_DATA to create Business Partner number . When I am executing the BAPI Business partner number is not getting created in tcode BP. I am passing Partner Category = 2 Central Data = aaa Please Help. Palak Edited by:
-
Oracel 10gR2 XMLDB -- how to query in Java
Ive some problems. Ive some search queries which are working on normal relation table, but I dont know how it works on XMLDB (Oracle 10gR2) Structure of XML file My xml table structure will be : Create table <tablename> Person_Id number primary ke
-
There was an error joining the network..... help please
I got a mayday call from a friend with an iBook G4 and wonder if anyone here can help me help him solve this problem. He purchased and set up a Netgear wireless router at home about a year ago and up until a few days ago was able to connect fine wire