Error in displaying the parameter

Hi Experts,
I have a parameter of type char128 which is usedfor a filepath. but in the parameter if we enter the data which is more than 45 length. It is displaying only 45 charecters length when I saw in debugging mode the value is upto 45 charecters only. Please help me in getting the total value.
Is their any restriction on length of parameter value. Please suggest.

Hi,
for this use this function module.so that it can display it full.
PARAMETER P_FILE LIKE IBIPPARMS-PATH.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = 'P_FILE'
    IMPORTING
      FILE_NAME     = P_FILE.

Similar Messages

Error in displaying the address in the address bar of jsf program

Hello,
I develop a simple application with 3 jsf pages, one is the main.jsp, the other two are article.jsp and proposal.jsp. I also create 4 jsf navigation case in the faces-config.xml which contain the following situation:
article.jsp -gomain1> main.jsp
main.jsp -goArticle> article.jsp
main.jsp -goproposal> proposal.jsp
proposal.jsp -gomain2> main.jsp
I create two commandbuttons in the main.jsp and the actions are goArticle, goProposal respectively.
I create one commandbuttons in the article.jsp and the actions is gomain1.
I create one commandbuttons in the proposal.jsp and the actions is gomain2.
When I run the program, everything works fine. But I found out that there is something error in displaying the links in the address bar:
1. main page, http://localhost:8988/po-view-context-root/faces/main.jsp ok.
2. click article, http://localhost:8988/po-view-context-root/faces/main.jsp;jsessionid=c0a87f6e231cc8717caa21484ec38fecb60f8f50a7d2 ok.
3. click return, http://localhost:8988/po-view-context-root/faces/article.jsp (ERROR: should be main.jsp but the content is main.jsp?)
4. click proposal, http://192.168.127.110:8988/po-view-context-root/faces/main.jsp (ERROR: should be proposal.jsp but the content is proposal.jsp?)
5. click return, http://localhost:8988/po-view-context-root/faces/proposal.jsp (ERROR: should be main.jsp but the content is main.jsp)
It seems to me that the address bar displaying the wrong address but the content is correct, it quite annoying me, do i do something wrong or is it a bug in 10.1.3?
Regards,
Alan 22/11/2005

Hi Huseyin,
verify if you have defined the column name "link_name" on your "sql" parameter. It should be something like:
select geometry, link_name from your_table
Joao

ABAP Run time error when display the Customs Export declarations

Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar                              type      /sapsll/corpar_t
lt_corpar_ht      type      /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
     "/SAPSLL/CUHD_LOAD_SELECTION".
    The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
    In the source code you have the termination point in line 144
    of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep Maddi

Hi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors         ITAB_DUPLICATE_KEY
ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep

Error in InfoView "The Parameter Value is not Valid"

Hello,
I have developed a Crystal Report in CR2008 and uploaded in the InfoView. Now when i run the report via scheduling or load the report with the data and try to change the parameter (editable set in CR) from the drop down list and hit apply i get an error dialogue box "The parameter value is not valid" and message says "null".
Also another issue is that i cannot execute the report directly in InfoVIew, i have to schedule it to run the report. Report is connected to the SAP InfoSet.
Any input would be much appreciated.
Thanks.

We have rebuild new servers for InfoVIew and it just works fine. Both the problem solved.

Error in displaying the label_column on the map

hello everyone,
i am developing a travelling salesman problem project for my graduation project in my university. i want to see the street names on the result map in my application. the related code part of my program as below:
String [] thmStr = new String[2];
thmStr[0] = "tspTheme";
String dtsrc = "spatial10g";
String baseMap = "us_city_map";
String mapTitle = "Courier Guidance Map";
mv.setDataSourceName(dtsrc); // set datasource name
mv.setBaseMapName(baseMap); // set basemap
mv.setBoundingThemes(thmStr, 0.15, true);
mv.setImageFormat(MapViewer.FORMAT_PNG_URL); //set image format
mv.setMapRequestSRID(8307); //set the SRID of the map request
mv.setMapTitle(mapTitle);
mv.addJDBCTheme(
mv.getDataSourceName(),
thmStr[0],
sql,
"geometry",
"8307",
"L.TSPROUTE",
"link_name",
"T.STREET NAME",
false);
the code works correctly, i see the result route labeled by L.TSPROUTE, i do not see any error messages but there is not displayed the "street names" on the result route.
i am not able to find any reason causing this problem. i have a time problem and any help will be appreciated.
Regards
Huseyin

Hi Huseyin,
verify if you have defined the column name "link_name" on your "sql" parameter. It should be something like:
select geometry, link_name from your_table
Joao

Getting an unexpected error while displaying the bound HtmlOutputText

I am getting this unexpected error when I am trying to display the HtmlOutputText which is bound to a backing bean HtmlOutputText component.
Error:
java.lang.IllegalStateException: strict servlet API: cannot call getOutputStream() after getWriter()
     at weblogic.servlet.internal.ServletResponseImpl.getOutputStream(ServletResponseImpl.java:253)
     at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:176)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3151)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
The JSP Page is :
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
    pageEncoding="ISO-8859-1"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>Two Beans</title>
</head>
     <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<body>
<f:view>
<h:form id="TwoBeansForm">
     <h:selectOneMenu id="Dropdown" value="#{hlb.cb.selVal}">
          <f:selectItems value="#{RgsRequestBean.compLookup.competencyAreaMap}"/>
     </h:selectOneMenu>
     <h:commandButton id="TestButton" value="Display" action="#{hlb.display}"/>
     <h:outputText id="SelectedValue" binding="#{hlb.text}"/>
</h:form>
</f:view>
</body>
</html>The backing bean code is:
package trial;
import javax.faces.component.html.HtmlOutputText;
public class HighLevelBean {
     private ChildBean cb;
     private HtmlOutputText text;
     public HighLevelBean(){
          cb=new ChildBean();
     public ChildBean getCb() {
          return cb;
     public void setCb(ChildBean cb) {
          this.cb = cb;
     public HtmlOutputText getText() {
          return text;
     public void setText(HtmlOutputText text) {
          this.text = text;
     public String display(){
          text=new HtmlOutputText();
          text.setValue(cb.getSelVal());
            return "goback@twobeans";
}The goback@twobeans string provides the navigation to the same jsp page.
Childbean just have one String member variable.
The values in the drop down is getting populated but when I am trying to get the selected value to be displayed through the HtmlTextOutput the above error is thrown...

Hi ,
For troubleshooting your issue, please take steps as below:
1. Open web.config file of current web application
2. Find the node that begins
<trust level=
3. Change the trust level from WSS_Minimal to
WSS_Medium
4. Save the file
5. Drop to command prompt and execute :
iisreset
If your issue persists, please provide detail error message of ULS log to determine the exact cause of the error?
For SharePoint 2010, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Best Regards,
Eric
Eric Tao
TechNet Community Support

Error when displaying the table

hellow,
here i have to .htm pages, in first page i am entering the table name, and it has to display the table details in second page.
but in second page i am getting error like field catalog not found
plz help me.
with regards
babu

hi babu rs
Please post the code of the two bsp page with the layout as well as abap code. Only than anybody can help you.

Error Message Displaying the status Bar not like popup message

Hi all,
My Requirement is while creating invoice if pricing conditons is repeted , system should thorough the error message like (uplicate Condition Types Are Not Possible in the status Bar but Im getting poup Error message So I want to display the same message in the status Bar.
Please Help me any one.
Regards,
Prathap

I dont want to Display the popup, I want to Display in Status Bar as a Error Message.
Like this .
If I put message type 'E' its Displaying popup message , MESSAGE ' Duplicate Condition Types Are Not Possible.' TYPE 'E'.
If I Put messge type 'I' its Displaying in Status Bar .
Regards,
Prathap
Edited by: giri prathap on Sep 13, 2011 12:35 PM

Run time error while displaying the list of km folders

hi
i am trying to display the list of contents in the km folder using km api but the application is displaing an runtime error
package com.sap.test;
error in init method component
any body know the solution for this problem .
thanks

hi there
public class kmportalcomp extends AbstractPortalComponent
          public String outtxt;
          int depth;
          int rowid = 0;
          int counter = 0;
     public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
          IUserContext userCtx =request.getUser();
          IResourceFactory factory;
          IPortalComponentContext compContext = request.getComponentContext();
          IPortalComponentProfile profile = compContext.getProfile();
          try {IUser serviceUser = WPUMFactory.getServiceUserFactory().getServiceUser("ccadmin_service");
               String webpath = request.getWebResourcePath();
               IResourceContext resourceContext = new ResourceContext(serviceUser);
               response.write(webpath);
               String fpath;
               fpath = profile.getProperty("path").trim();
               depth = Integer.valueOf(profile.getProperty("depth").trim()).intValue();
               RID rid = RID.getRID(fpath);
               ICollection folder = (ICollection)ResourceFactory.getInstance().getResource(rid, resourceContext);
               IResourceList fileList = folder.getChildren();
               response.write("d.add(0,-1,'"folder.getName()"');\r\n");
               rowid = 0;
               scan_km(response, fileList,0);
               response.write("document.write(d);\r\n");
                response.write("//--></script>");
                response.write("</div>");
            } catch (Exception e) {
                response.write("Error Occured<br>");
                response.write(e.toString());
          public void scan_km(IPortalComponentResponse response,IResourceList list,int level) {
               int currentrowid = rowid;
               if (level>depth&&depth!=0) {
                     return ;
                 String rid = " ";
                 IResourceList tmpreslist;
                 ICollection tmpcollection;
                 level++;
                 for (int i = 0; i < list.size(); i++) {
                     IResource tmpres = list.get(i);
                     try {
                         if (tmpres.isCollection() && tmpres.getLinkType() == LinkType.NONE ) {
                              //&& tmpres.getLinkType() == LinkType.NONE
                              tmpcollection = (ICollection) tmpres;
                            tmpreslist = tmpcollection.getChildren();
                            if (tmpreslist.size()>0) {
                                rowid++;
                                response.write("d.add("rowid","currentrowid",'");
                                response.write(tmpres.getName());
                                response.write("','');\r\n");
                                scan_km(response,tmpreslist,level);
                         else {
                            rowid++;
                            String dispname;
                            dispname = tmpres.getDisplayName();
                            if (dispname==null||dispname.equals(""))
                                dispname = tmpres.getName();
                            rid = "/irj/go/km/docs"+tmpres.getAccessRID();
                            response.write("d.add("rowid","currentrowid",'"dispname"','"rid"');\r\n");
                     } catch (Exception ex) {
the error is am getting is
com.sapportals.wcm.repository.enum.LinkType and com.sapportals.wcm.repository.enums.LinkType     kmportalappproject/src.core/com/sap/test     kmportalcomp.java
thanks

How to display the parameter in the xmlp report ouput.--Urgent Requirement

Hi All
I have requirement of developing a report using xml publisher.Report has 10 parameters, I have to display the values of all the parameters in the report ouput.
Thanks in advance

yes using <?param@begin:PARAMETER_NAME?> will be good
solution.
when you use this,there will be no need of disturbing
your RDF,no extra formulae columns,no exxtra summary
columns.Hi All
Thanks for the reply, it is working fine with <?param@begin:PARAMETER_NAME?>.
Earlier I use to write all the parameters in the select clause and use it in rtf template.
I think <?param@begin:PARAMETER_NAME?> this is the exact solution for displaying parameter values in the report.
Thank you very much.
Regards
Srini.

Crystal Report in InfoView is not displaying the parameter

Cheers All,
We have a Crystal Report which is connected to the BEx query. We also have parameters based on variables in BEx.
When we run the report directly from Crystal, everything is fine.
However, when we run the report from InfoView, when I click on the "..." button beside the parameter to make the selection, everything hangs up.
This (static) parameter is based on a variable which is based on a compounded characteristic 0ASSET_AFAB.
The compunding keys are :1) Company code 2) Asset 3) Sub-asset.
The user is providing the Company code in another parameter, but the user is not providing the Asset, nor the asset sub-number... so all the iterations of asset/sub-asset/depreciation area are displayed - and this works at BEx level, and it works when the report is run directly from the Crystal Reports, however this does not work when the report is run from the InfoView.
What would be the best course of action?
Regards,
Dmitriy

Hi Rajiv,
In OIM 9.1 we are using the stored procedure to get the values for all the fields.In the stored procedure we are using the cursor to store the list of values but in the BI Publisher we are using the SQL queries to retrieve the values for the fields in the report. In sql queries we are unable to handle the list of values for the fileds like User Groups and Resources provisioned/deprovisioned.
Please let me know the process even if we can get list of values for the fields using the SQL queries.

Empty paragrpahs in a textflow cause runtime error when displaying the text

Hello there,
when I create a textflow which has empty ParagraphElements in
it (i.e. a ParagraphElement without any children) I get this
runtime error once I try to display the text in a container:
Error: Error #2175: One or more elements of the content of
the TextBlock has a null ElementFormat.
Is this a bug, or is there a legitimate reason for this
error? If so, I'd like to understand why. In my reasoning an empty
ParagraphElement should just result in the rendering of a newline.
But maybe I'm thinking too much in HTML terms here...
I appreciate any light you can shed on this,
thanks in advance,
Roland
P.S. I'm using the latest build 370

Hey Richard,
thank you very much, and I was indeed already using your
mentioned workaround, I was just wondering whether it was a bug or
something I didn't fully understand :) But now I do, so thanks for
your time.

Getting error when using the "/parameter" switch in command line run

Has anyone experienced this problem before?
My report queries over 100,000 records from a view. When the report is run from the command line every thing works fine.
But when I add a condition using a "parameter", although the report still runs fine from the destop, when launched from the command line it errs.
"Oracle Discoverer Desktop has encountered a problem and needs to close. ..."
"The instruction at "0x0044397c" referenced memory at "0x0000004e". The memory cound not be "read"...."
I'm guessing its a memory issue with my PC. I've tested using a parameter with other reports using fewer records and it doesn't err from the command line.
I can work around the issue by not using a parameter but then I have 20 versions of the same report each with a different condition.
Any suggestions would be appreciated.
Lise McGillis

Hi Michael,
I'm using an DELL Intel Pentium 4 CPU 3.00 GHz with 1 GB of RAM. We use Microsoft Windows XP Prof version 2002.
As for Discoverer we are using 10G, Desktop Client 10.1.2.48.18 - 1047500 KB available memory , 2099744 KB Free disk space.
I'm not sure I have acess to a computer with more RAM but I'm looking into it.
What I'm frustrated by is the fact that the parameter works fine when run directly from the desktop but when passed from the command line it bombs... but only when dealing with mega records.
Lise.

Error in displaying the Global List of entries

Hi,
   I VC 7.0 i defined a Global List of Products for a Combo Box and written a Formula for filter based on user Selected Values...
   Filter is working good...
WHen the user selected drop down box on Product insted of displaying Text Values of the entres i defined in Global List it is displaying Key Values of the entries i defined in Global List
How can i correct this error
Thanks

Hi,
for this use this function module.so that it can display it full.
PARAMETER P_FILE LIKE IBIPPARMS-PATH.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = 'P_FILE'
    IMPORTING
      FILE_NAME     = P_FILE.

Error while displaying the attached file

Hi ,
I am doing one task ,where I need to attach a TIFF file to the workitem .
I am getting desired output while attaching the file from presentation server but While doing from application server , I am able to attach the file to corrseponding workitem but when i tried to display it ,it gives an error <b>" Operation could not be performed"</b>
So could you please help me out how to do this ?
I am using a FM "SCMS_UPLOAD" for uploading file from application server .
Is there any other way to upload or read the file .
Thanks

Hi,
Use the other FM's
'SO_OBJECT_UPLOAD'
OR
If you are trying to read the file from an SAP Application server,
1) "OPEN DATASET" to open the file,
2) "READ DATASET" to read the data into an internal table
3) "CLOSE DATASET".
OR
*   Retrieve Data file from Application server(Upload from Unix)
DATA: i_file like rlgrap-filename value '/usr/sap/tmp/file.txt'.
    OPEN DATASET i_file FOR INPUT IN TEXT MODE.
    IF sy-subrc NE 0.
      MESSAGE e999(za) WITH 'Error opening file' i_file.
    ENDIF.
    DO.
*     Reads each line of file individually
      READ DATASET i_file INTO wa_datatab.
*     Perform processing here
    ENDDO.
Regards,
Nandha

Error in displaying the parameter

Similar Messages

Maybe you are looking for