Error In Distributed Query moving LOB

The following error has occurred:
ORA-22992: cannot use LOB locators selected from remote tables
ORA-02063: preceding line from BMB5_ADM
ORA-02063: preceding 2 lines from BMB18CU3
Query:
INSERT INTO IMAGE@BB18C3
SELECT B.*
FROM IMAGE@BB17CS B,INV@BB17CS I
WHERE B.ref_no = I.ref_no AND B.ref_resets = I.ref_resets AND I.a_no = 70
Is there a way around moving a LOB from one database to the next. I can not use Import/Export it has to be done as part of a query.
Thanks,
Gavin

Gavin,
Had same problem... see thread entitled "ORA 22992 -- silly" in the PL/SQL and SQL forum.
Barbara lists a link that spells out two workarounds (only one that would work for BLOBs though).
Thanks,
Adam

Similar Messages

5200 : Error in executing query -- Hyperion Financial Reporting

Problem in accessing the Hyperion Financial Reports.User is having full access and able to access all the folders except one folder(Legal Folder reports). We are getting 5200: Error Executing the query error. Recently we have upgraded Hyperion to 11.1.1.3 version . Before upgrade user is not facing the problem. After Upgrade user is getting these errors while accessing the reports. we did research and found in "Error 5200: Error Executing Query" When Viewing Financial Reporting (FR) Reports". Is this error is relevant to the Information provided in Metalink and also can you please tell us is there any impact on doing the solution provided in the below. Why is this error is coming is any preferences needs to be changed.Please help us on this.
Error Description:
5200: Error executing query
Servername/ApplicationName/DatabaseName/Error(1007090) Unknown Member name [Current Point of view for years] in Outline Query
Doc ID 1107142.1:
Possible Cause 1:
If members have recently been added, moved, or deleted from the data source, Essbase, HFM, or Planning, the existing User POV records become out of sync.
The User Point of View record uses indexing to identify the member. If the index changes because of changes in the outline, the User Point of View record no longer points to the correct location in the outline.
To resolve the issue, you need to run the ManageUserPOV utility on a Windows server that has the Financial Reporting Reports Server, or in a Unix or Linux environment, has the Financial Reporting Print Server installed.
You will need to provide a BIPlus Global Administrator user ID and password to run the utility.
The utility will provide the correct syntax to run the command.
1. In \Hyperion\products\biplus\bin\ManageUserPOV.properties, specify the following parameters:
a. ReportServer
b. DatasourceUser
c. DatasourcePassword
d. User
e. Datasource (You can find the datasource in Workspace under Tools>Database Connection Manager in the Name column.)
2. From the command line, cd to Hyerion\products\biplus\bin
3. Type in "ManageUserPOV" without the quotes. The executable will read the parameters previously set in the ManageUserPOV.properties file.
Thanks,
Naresh.

Take a look at this: http://adistrategies.com/index.php?loc=knowledge1&item=291
Hope it helps.
Mehmet

Error Executing Database Query

I have a web application written in CF8 with Oracle 11g as the back end. This application has been used very often for more than 6 years. Currently I am moving to CF10 and did only a little modification to the CF codes. When I ran the new application in my test server, everything seems to be working just fine except when it calls an Oracle Package. This action produces an error: Error Executing Database Query The strange thing is everything work before and after calling the procedure, I tested using cfabort This Oracle Package is still working in production server (CF8) but not when it is called by CF10. My question is: Is there any changes for CF10 when calling a procedures? or is there any hotfix that I'm not aware of? The code is as follow:   SELECT case trim(to_char(SYSDATE, 'DAY')) WHEN 'MONDAY' then '1' else '2' end AS TodaysDate                 from dual
            SELECT Count(other_id) AS NoRecFound     FROM gl_dup_ids_ssns     WHERE Trim(create_date) =
            SELECT Count(other_id) AS NoRecFound     FROM gl_dup_ids_ssns     WHERE Trim(create_date) =         CF codes to Stop the process and email admin
              Error Executing Database Query shows up when it hit to run cfstoredproc. The codes are exactly the same as in CF8, this template was not modified. Exceptions 14:03:53.053 - Database Exception - in /home/space/users/www/GL/glproc.cfm : line 93     Error Executing Database Query.

mega_L wrote:
SELECT case trim(to_char(SYSDATE, 'DAY')) WHEN 'MONDAY' then '1' else '2' end AS TodaysDate                 from dual
            SELECT Count(other_id) AS NoRecFound     FROM gl_dup_ids_ssns     WHERE Trim(create_date) =
            SELECT Count(other_id) AS NoRecFound     FROM gl_dup_ids_ssns     WHERE Trim(create_date) =         CF codes to Stop the process and email admin
Surely, that cannot be the actual SQL, as it is obviously invalid.

Error on Parallel Query

Hi,
My application throws the following error when Iam processing a parallel query on my database. Can any one help me to resolve this.
ERROR at line 1:
ORA-29903: error in executing ODCIIndexFetch() routine
ORA-20000: Oracle Text error:
DRG-50857: oracle error in drekrgm (one piece lob read)
ORA-01555: snapshot too old: rollback segment number with name "" too small
ORA-22924: snapshot too old
Regards
Venkat

HI,
Thanks for the article. I read the article but my problem is getting addressed. I have enough disk space and rollback segments.
7 rollback segments (1 default 200 MB + 6 created for my executing wtih 1GB each ). All of them are auto extended 10M per block.
Apart from this I have a free space for 25 GB in the drive left out. Inspite of all of these. I am getting this error.
I am not able to understand the "DreKrgm" part.
Can you throw some light on this part.

A Query with LOB's requires OCI8 mode, but OCI7 mode is used

Hello all,
I am using Oracle 10g. We have two tables and in that, in one table i have a Long Raw Column and in the other table i have a BLOB field. When i use the select query to fetch the details from the table with Long Raw field it is working fine and at the same time if i use the select query on the table with the BLOB field it is giving me an error
'A query with LOB's requires OCI8 mode, but OCI7 mode is used.'
Please help.
Thanks.
Vinodh. S

Hi Oleg,
I think your client machine is not setup to connect to the Database. Run the Oracle Net8 Assistant or the Net8 Easy Config to connect to the Database.
This should work.
Samuel.
PS: I need someone to answer my question, please

Error after upgrade "Error Executing Database Query. "

I have set up a new server with CF MX 6.1. I have moved code
from a CF 5 server. Now I am getting a lot of errors like this one.
They all vary somewhat but seem to be related to two things. The
problems seem to occur with CFINSERT to an access database. I have
been trying to fix this for some time now and would appreciate any
input. I have installed both the cf 'service pack' and a hot fix
that I thought was related directly to this.
Error Occurred While Processing Request
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in
INSERT INTO statement.
The error occurred in
C:\Inetpub\vhosts\mysite.com\httpdocs\Ezedit\act_insert.cfm: line
14
Called from
C:\Inetpub\vhosts\mysite.com\httpdocs\Ezedit\index.cfm: line 53
Called from
C:\Inetpub\vhosts\mysite.com\httpdocs\Ezedit\act_insert.cfm: line
14
Called from
C:\Inetpub\vhosts\mysite.com\httpdocs\Ezedit\index.cfm: line 53
12 : <CFELSEIF #ProductScan.Recordcount# IS 0>
13 :
14 : <CFINSERT DATASOURCE="mysite" TABLENAME="#Table#"
username="admin" password="">
15 :
16 : <CFQUERY datasource="mysite">
SQL insert into Products
(WIDTH,HOTBUY,RETAIL1,REPEAT,HEIGHT,PRODUCTTITLE,JOIN,AJOIN,MATERIAL,OBJECTGROUP_ID,BOOKN AME,OBJECTGROUP_ID2,VJOIN,PRODUCTDESCRIPTION1,LENGTH,SAMPLE,MANUFACTURERPARTNO)
values ( (param 1) , (param 2) , (param 3) , (param 4) , (param 5)
, (param 6) , (param 7) , (param 8) , (param 9) , (param 10) ,
(param 11) , (param 12) , (param 13) , (param 14) , (param 15) ,
(param 16) , (param 17) )
DATASOURCE mysite
VENDORERRORCODE -3502
SQLSTATE 42000
Please try the following:

<CFINSERT DATASOURCE="mysite" TABLENAME="#Table#">
Probably an error. The tag assumes implicitly that a form has
been submitted. In fact, one of its attributes is "formfields".
Since you leave out the attribute, Coldfusion assumes it has to
insert all the fields of a submitted form. You should put the tag
within the block
<cfif isDefined("form.someFormField")>
</cfif>

Query with LOB's requires NET8 which is not detected on this pc

Hi,
i am running query from toad 7.2 i am getting following error:
oracle version:9.2.0.6.0
toad version:7.2
select * from selector_t
query with LOB's requires NET8 which is not detected on this pc
SQL> desc selector_t
Name Null? Type
OBJ_ID0 NUMBER(38)
SELECTOR_BUF BLOB
Thanks
Prakash
Edited by: user612485 on Jan 6, 2009 10:52 PM

user612485 wrote:
toad version:7.2
query with LOB's requires NET8 which is not detected on this pcLooks like a issue with Toad. Did you google and check Toad forums? Perhaps you could use SQL Developer instead?

Pesky Error Executing Database Query

About three times a week, we get a ton of errors for "Error
Executing Database Query", all at once. That is about as
descriptive as it gets. It does tell us the line and the exact SQL
statement it tried to run, but when we copy and paste the SQL into
a query browser it runs fine. It's almost like there is a
connection failure somewhere between CF and the db that is causing
this "error"? Has anyone experienced anything like this? Thanks for
any help.

We sometimes get that when a table has been corrupted on the
SQL server, or the DTS service is having issues. The error just
says there is a database execution error and says the error was at
xyz, just like yours.
Generally restarting the SQL server fixes the issue because
when it restarts, SQL server rebuilds the tables as a kind of
repair.
Our problem seems to relate to issues with the drive. Just
lately we saw a note in the Event Viewer that indicated that one
drive had a bad block. It is possible that during the "repair" SQL
moved the data off that block, similar to how defrag would.
Basically, if you are seeing it semi-regularly and it works
fine after restarting the data server, you may want to schedule a
maintenance downtime and run a full disk check and defrag, possibly
even replacing the drive.

Web Analysis Error -- Error while executing query and retrieving data

Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveW

Hi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P

Error while running query in BI Answer

Hi All,
I am getting this error while executing a query in BI Answer.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 1114, message: ORA-01114: IO error writing block to file %s (block # %s) at OCI call OCIStmtExecute
Do anyone have any idea about this error. The query was running and i was able to see the output but suddenly it throws this error.
Awaiting for response.
Thanks
Ashok

Its an Oracle database error, possibly caused because your file system has filled up, or because the disk device is no longer available. Possibly caused by a Sort operation on your query causing the TEMP segment to auto extend and fill up the filesystem, but I'm guessing at the last bit.
You need to contact your DBA to investigate further.
Edited by: Matt T on Dec 16, 2008 10:38 AM

Error while executing query in OLAP server

Dear all,
we are using APD to extracted sales data for the last 3 months .this APD was executed perfectly till yesterday.
in today's run APD got failed with error message as below
"@5C\QError@ Fiscal year variant Z3 is not maintained for calendar year 9999
"@5C\QError@ Error while executing query in OLAP server; redesign query.
Please suggest corrective action .
I have tried executing manually with less selections on creation date by no success..
regards,
puru

Purushotham wrote:
Hi Jeeth,
>
> in query we have selection for " currency type " and created on " .we are not using fiscal year variant.
>
> in first strep of APD design only we have a problem and also recently there are no changes to this APD .
>
> It was executed perfectly on till 4th .
>
> Edited by: Purushotham on Feb 6, 2012 12:48 PM
Dear Purushotham, You can maintain the Fiscal year Variant in OB29. 2 possibilities, #1 : Data for the FYV/Year could be wrong. #2 : Updates for Fiscal Year might not have been done. You can maintaine FY varients up to FY 2XXX in your BW system. This should fix the error. The table T009 must be the same as we get when we do OB29 TCode in BW, so via SPRO do rebuild of table again.
Edited by: Arun Bala G on Feb 6, 2012 4:05 PM

Getting below error while opening query in bex 3.5x

Dear Guru's
I am getting below error while opening query in bex 3.5x
The following object were not found when accesing the server .
Press repair to correct the problem (included parts of query deleted) press cancel to undo the last action.
Regards
Karan

Hi,
1) When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
2) so create an authorization object for each of these attributes with * (full authorization)
Regards,
Marasa.

Error while activating query element.

Dear All
Can any one tell this error .
When iam transporting the queries to BI production there is an errror in Transportation log that error while activating query element.
But the querysis fine in Bi quality.
Error : Error while activating "6899QYGVHJPGYUBLKA9SPHORZ".

Hi
Might be that query element was deleted(not used n was used before in dev) while creating cross check once in your query.
First check what is that element which is not transported?
use table RSZELTDIR to find out weather its a Var or CKF or RKF etc...
then check for the same in the query in QA weather its active and ported fine to QA if not try to collect the element and transport to QA in a separate request.
Regards
KP

Error while copy query between infocubes

I was trying to copy a query between infocubes and ended with error message.
Query copied from Infocube A to Infocube B. Infocube B has an additional dimension with 2 char's when compared to infocube A.
Using transaction RSZC, I tried to copy the query, but ended up with following error..
1.Program error in class COPY_QRY_TO_CUBE method : UNCAUGHT_EXCEPTION
2.An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
3.The system tried to insert a data record, even though a data record with the same primary key already exists
I also tried using function module RSZ_I_COPY_QRY_TO_CUBE, which was of no help. I get the following message with the function module...
1. Program error in class RS_TESTFRAME_CALL method : UNCAUGHT_EXCEPTION
2. An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
3. The system tried to insert a data record, even though a data record with the same primary key already exists
I have also tried a solution in BW expert by using debugging mode of the above function module, again this was of no help..
I am BI 7.0 SP09...
Any ideas, Please....
Thanks,
RR
Message was edited by:
Ray R

Hello,
Are you trying to copy Business Content delivered Queries?
I had also got this error when copying over all queries from one cube to another. Reason for this message was plain simple - I did not realise that the sender Cube had Business Content Query which we cannot copy over using RSZC as system tries to create another query with suffix as 0****_1. We cannot create query in SAP user namespace. Error message is different then the reason behind it.
Thanks
Ravi

Another Error Executing Database Query.

I am getting this error.
12:40:54.054 - Database Exception - in
C:\CFusionMX7\wwwroot\Author\dropdown2\EmployeeAddAction.cfm : line
26
Error Executing Database Query.
i have added extra fields in the mdb and added extra code to
the form page and the action page.
i am getting this error still.
this is how i broke it down.
If I run my 2 files EmployeeAddForm.cfm and
EmployeeAddAction.cfm
I get this error:
NOTE: if i take out the comments from the code and ignore the
new fields added to the db it works fine!!!!!
The web site you are accessing has experienced an unexpected
error.
Please contact the website administrator.
The following information is meant for the website developer
for debugging purposes.
Error Occurred While Processing Request
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in
INSERT INTO statement.
Resources:
Enable Robust Exception Information to provide greater detail
about the source of errors. In the Administrator, click Debugging
& Logging > Debugging Settings, and select the Robust
Exception Information option.
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
Remote Address 127.0.0.1
Referrer
http://127.0.0.1:8500/Author/dropdown2/EmployeeAddForm.cfm
Date/Time 06-Jun-07 12:40 PM
NOTE: if i take out the comments from the code and ignore the
new fields added to the db it works fine!!!!!

Try using '###CreateODBCDate(Form.DateOfBirth)###'. Access is
strange on
handling dates. It has a been a while since I have used
Access so it could
be as simple as wrapping it single quotes as well. I am
assuming the
"
> <tr>
> <td> </td>
> <td>
> <input type="submit" value="Add to Database">
> </td>
> </tr>
>
> </cfform>
> </table>
>
> </body>
> </html>
> ---------------------------
> EmployeeAddAction.cfm
>
> <cfquery name="InsertEmployee"
> datasource="#Request.MainDSN#">
> INSERT INTO Employee(
> SSN,
> CompanyID,
> Firstname,
> Lastname,
> Salary,
> DateOfBirth
>
> )
> VALUES (
> '#Trim(Form.SSN)#',
> #Val(Form.CompanyID)#,
> '#Trim(Form.Firstname)#',
> '#Trim(Form.Lastname)#',
> #Val(Form.Salary)#,
> #CreateODBCDate(Form.DateOfBirth)#
> )
> </cfquery>
>
> <cfmail
to="#Form.Firstname#.#Form.Lastname#@somewhere.com"
> from="[email protected]"
> subject="Welcome to your new company!">
> Welcome to your new company, #Form.Firstname#
#Form.Lastname#!
> </cfmail>
> 
>

Error In Distributed Query moving LOB

Similar Messages

Maybe you are looking for