Error in DMSYS.DBMS_JDM_INTERNAL when applying SVM regression model

Hi,
I created SVM regression model with case-id column of varchar2(40) and several numeric inputs. When I try to apply the model (even on the same table that was used for training) I am getting
Server task state: error
Server task detail:
ORA-06502: PL/SQL: numeric or value errorORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "DMSYS.DBMS_JDM_INTERNAL", line 387
ORA-06512: at line 1
I am using Oracle 10.2.0.1 and Miner 10.2.0.2
Thanks.

There is a known bug that causes this issue. It is fixed in 10.2.0.3 database patch release.
Regards
Sunil

Similar Messages

"Error writing metadata to" when applying keywords

This is the initial post of the thread in this new forum, as requested. A link to the history of the issue is here. In a nutshell, this thread documents the irritating and difficult-to-track-down issue where Bridge is unable to write metatdata to a file for some unknown reason.
My previous post:
I just noticed that there may be some interaction between Photomechanic and Bridge. Try this:
Put about 20 RAW files in a folder.
Make sure all of them have at least one keyword applied that is nested in another (so, Places -> Canada, and Canada is selected)
Close bridge
Open that folder in PhotoMechanic
Pick the first ten images and rename them using the rename function (left click the selection)
Close PM and open bridge
Try to apply a new keyword to the renamed files
My result is that the renamed files throw the error, and the other files do not. Try this #2.
Put about 20 RAW files in a folder.
Make sure all of them have at least one keyword applied that is nested in another (so, Places -> Canada, and Canada is selected)
Close bridge
Open that folder in photomechanic
Pick the first ten images and adjust the time of the RAW file (Tools, Adjust capture dates and times...). Doesn't matter by home much.
Rename them using the rename function and this rename code: {year2}{month0}{day0}-{hour24}{min}{sec}
Close PM and open bridge
Try to apply a new keyword to the adjusted and renamed files
My result is that the adjusted and renamed files throw the error, and the other files do not.
Using BR 4.0.5.11 and PM 4.6.8

My result is that the renamed files throw the error, and the other files do not. Try this #2.
Mike,
Sorry to say but I can't reproduce your scenario. Tried the demo of PhotoMechanic (4.6.8) and used it together with my Bridge (version 4.0.5.11 on Mac OSX 10.6.8) as you stated in your post.
Not only did I have no problem to repeat the steps you are describing without problems or error messages. I also tried it with both apps open and changing rating and keywords on the go between them. They both reflect the given changes from one and the other without problems. I have to say PM does this faster then Bridge but I don't know how this will be after using as much files in PM as I did in Bridge
Leaves me thinking it has to do with your set up, either for Bridge or for your system regarding permissions or corrupted preference files.
What helped me often when in trouble with Bridge was:
Quit Bridge
From user library delete Bridge Cache (user/library/caches/Adobe/Bridge CS5) and from here delete both plug in and cache file
Same library preferences folder, delete the file called 'com.adobe.bridge4.plist'
Now start Apple Disk Utility and choose check and repair permissions (or use other maintenance software, I have Cocktail running on a daily base to repair permissions and clearing cache files)
Then restart Bridge holding down option key and choose reset preferences.
Try again.
And without rereading all info of this thread, I am using the files while they are on my main start up disk and not on an external drive or network, think you where using the same set up?

Fatal Error code C0000043 shows when applying update - Can't repair though!

I was updating an old laptop with the current windows updates since I hadn't used it since 2012. After the updates were download and the computer restarted, it got stuck loading the files. The Fatal Error message showed C0000043.
Now I've read other articles where you can press F8 to get the the boot options menu to try to repair it. When I do get there the two options I get are to Start windows normally (which just proceeds to get stuck again while trying to load), or Launch Startup
repair (which then gets stuck loading the files). Since I can't get in the the windows repair, I can't proceed with steps to fix the update issue.
Any solutions you have for this problem?

Hi,
Since the computer won’t boot normally, I suggest to repair it with a installation media in this way:
1.Insert the Windows 7 installation media.
2.Restart your computer.
3.Press key F12 or other keys it shows to select the boot menu when prompted to do so.
4.When the Install Windows page appears, click Repair your computer to access system recovery options.
5.Follow the instructions it shows.
You can also follow the article for detailed steps:
http://windows.microsoft.com/en-hk/windows7/start-your-computer-from-a-windows-7-installation-disc-or-usb-flash-drive
After entering the system, you can try fixing windows update problem in this way:
1. Run the windows update troubleshooter:
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
2. To automatically reset Windows Update components, click the hot fix below and then follow the on-screen instruction:
http://support.microsoft.com/kb/971058
3.Perform a clean boot to fix it:
a. Log on to the computer by using an account that has administrator rights.
b. Click Start, type msconfig.exe in the Start Search box, and then press Enter to start the System Configuration utility.
c. On the Services tab, click to select the Hide all Microsoft services check box, and then click Disable all.
You can also follow the steps listed below:
http://support.microsoft.com/kb/929135
Regards
Wade Liu
TechNet Community Support

Assigning role to role doesn't work when applying Database security model

I applied Oracle Database security model for BI Publisher.
then I create some roles and users and assigned roles to users in Oracle Database.
i also assigned appropriate folders to each role in BI Publisher.
the users with direct roles worked successfully but i got problem when i assigned roles to a super role, and assigned this role to a super user.
the super user could only access guest folder.
Please help me.
thanks.
Daniel
Edited by: user13344498 on Jul 5, 2010 11:13 PM

Add a Role to a Role:
1. From the Security Center, select Roles and Permissions; this will invoke the
Security Center page. Here you can see the list of existing roles and permissions.
2. Select the Add Roles icon for the Role.
3. Select the desired role from the Available Roles list and use the Move shuttle
button to move it to the Included Roles.
this is from "Oracle® Business Intelligence Publisher User's Guide Release 10.1.3.2 Part No. B40017-01" book, but the security model is BI Publisher Security.

The Apply Process meet some errors when applying..

Hi all,
My OS is Win Server 2003, Oracle is 10.2.0
I were setup my streams environtment one-way. All my works were ok. But today, when I open the OEM console, at the Apply node, I recognized that Total Received is 10 but Total Applied is 4 and status is APLLYING. I open the arlert log at the source database, have some errors:
Propagation Schedule for (STRMADMIN.capture_src_bosc_q, BOCENTER.REGRESS.RDBMS.DEV.US.ORACLE.COM) encountered following error:
ORA-25307: Enqueue rate too high, flow control enabled
I use
select propagation_name,status
from dba_propagation;
*==> STATUS is ENABLE*
At the Aplly process, I set the DISABLE_ON_ERROR is N, but seem as the apply process was halt (not continue apply some change at destination database).
Have any ideas for this problem ?
Edited by: changemylife on Nov 2, 2009 8:38 AM

I had same problem too , and by increasing the Streams pool , it solved .

Error when applying a XSLT transformation: No valid XSLT pro

Dear All,
I am getting following error when opening the "General Supplier Data" from Pre-Select Supplier.
Error Message: "Error message: Error when applying a XSLT transformation: No valid XSLT program supplied"
I have already read the related threads on SDN and checked the SAP Note 883896 and others. Even tried running the program UXS_DEL_NAVIGATION_NODE and UXS_ADD_MISSING_XSLT_NAME. But not able to solve the issue.
Kindly Help.
Regards,
Sagar

Hi Masa,
Thanks for reply. I have checked this note. As note suggests, S_DEVELOP auth object is assigned to the user. and it has value *.
Do I need to check anything else?
Regards,
Sagar

Error when applying a XSLT transformation

central instance
transaction SURVEY
Extras->Target Group Hierarchy-> Import from file
select file
Error when applying a XSLT transformation
dialog instance working

Hello Andrey Kuryanov,
Could make sure you describe the problem more clear as much as you can so that community can help you better.
Please provide more details with more detailed steps and actual error messge.
Thanks
Raja Pamireddy
Moderator

Error occurs when applying pre-install task of patch 9239089

Error occurs when applying pre-install task of patch 9239089
----------------------------------Pre-install Tasks--------------------------------------
4. Use SQL*Plus to run the script:
UNIX:
$ sqlplus /nolog
SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql <APPS schema name>
----------------------------------error message---------------------------------------
End of Creating PL/SQL Package AD_DBMS_METADATA.
DECLARE
ERROR at line 1:
ORA-20000: ORA-00933: SQL command not properly endedError in
ad_grants.Give_grants
ORA-06512: at line 685
Commit complete.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Thanks,
Jackie

Jackie,
$ sqlplus /nolog
SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql <APPS schema name> You need to run the script as follows (replace <APPS schema name> with apps):
SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql appsThanks,
Hussein

Error when applying patch 3171663(11.5.9 CU2 )..

hi..
error when applying patch 3171663(11.5.9 CU2 )
below error in log file:
Assigned: file mscplan.odf on worker 1 for product msc username MSC.
Time is: Sat May 22 2010 21:58:03
FAILED: file mscplan.odf on worker 1 for product msc username MSC.
Time is: Sat May 22 2010 21:58:04
ATTENTION: All workers either have failed or are waiting:
FAILED: file mscplan.odf on worker 1.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
below error in workerlog.. in adworker1
===============================================================================
The table is missing the index MSC_TRADING_PARTNERS_U2
or index MSC_TRADING_PARTNERS_U2 exists on another table.
Create it with the statement:
Start time for statement below is: Sat May 22 2010 21:58:04
CREATE UNIQUE INDEX MSC.MSC_TRADING_PARTNERS_U2 ON MSC.MSC_TRADING_PARTNERS
(SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID) LOGGING STORAGE
(INITIAL 4K NEXT 40K MINEXTENTS 1 MAXEXTENTS UNLIMITED PCTINCREASE 0
FREELIST GROUPS 4 FREELISTS 4 ) PCTFREE 10 INITRANS 11 MAXTRANS 255
COMPUTE STATISTICS TABLESPACE MSCX
Statement executed.
AD Worker error:
The index cannot be created as the table has duplicate keys.
Use the following SQL statement to identify the duplicate keys:
SELECT SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID, count(*)
FROM MSC.MSC_TRADING_PARTNERS
GROUP BY SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID
HAVING count(*)>1
AD Worker error:
Unable to compare or correct tables or indexes or keys
because of the error above
Time when worker failed: Sat May 22 2010 21:58:04
====================================================================
My application version :11.5.9
my database version 8.1.7.4
Regards
Jaffer Ali

>
Use the following SQL statement to identify the duplicate keys:
SELECT SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID, count(*)
FROM MSC.MSC_TRADING_PARTNERS
GROUP BY SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID
HAVING count(*)>1
>
Pl post the output of the above statement
HTH
Srini

Error when applying opatch

Recently upgraded from Oracle 10.2.0.1 to 10.2.0.5 & since then i cant run OEM, so oracle suggested Apply Patch 8350262 to your Oracle Home installation using OPatch.
OS : Windows 2003 32 bit
DB : Oracle 10.2.0.5
I get below error when apply opatch.
C:\oracle\product\10.2.0\db_1\OPatch>opatch apply 8350262
Invoking OPatch 10.2.0.4.9
Oracle Interim Patch Installer version 10.2.0.4.9
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : C:\oracle\product\10.2.0\db_1
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 10.2.0.4.9
OUI version : 10.2.0.5.0
OUI location : C:\oracle\product\10.2.0\db_1\oui
Log file location : C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2013-
01-02_23-02-41PM.log
Patch history file: C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch_hist
ory.txt
ApplySession applying interim patch '8350262' to OH 'C:\oracle\product\10.2.0\db
_1'
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 8350262: Required component(s) missing : [ oracle.sysman.agent.core, 10.2.
0.4.0a, higher version 10.2.0.5.0a found. ]
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplica
ble" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 74
C:\oracle\product\10.2.0\db_1\OPatch>
Any help would be appreciated.
Thanks,
Vikhar

Do you mean this "The patch is also included in 10.2.0.5 database patch 5 and 10.2.0.5.3 (PSU3)" which is quoted in (DOC ID 1222603.1), if so, i have downloaded. However, can you give me patch # for 10.2.0.5 version in order to double check , may be by mistake i download wrong version.
Thank you,

HELP: Keep Getting Error When Applying Magic Bullet Looks

get this error when applying Looks.
"After Effects error: crash occurred while invoking effect plug-in "Looks".
and then it says
"After Effects error: Crash in progress. Last logged message was: <2280>
<MCExportInfo: Destruct> <5> Destruct for 420462944"
I try to apply Looks to another video and I get a different error saying language registry key. I apply Looks to a third video and I get the dynamiclink error. It's like different error for different video. All 3 videos shot with different cameras.

Same problem here ! I have Vista 64 bit and Intel 4500 Mhd
driver. The issue is Magic Bullet Misfire works fine in Adobe After
Effects CS5 but it crashes with Magic Bullet Looks.
Have checked OpenGL in AE CS5 which are by default OFF, that is if you open Adobe After Effects CS5 and into edit and then click 'preferences'. Under previews there is ur OpenGL info. Click OpenGL, its says need to update driver or get a better OpenGL above 2.0. I think updating to new OpenGL may fix the issue. I have made a video with Magic Bullet Misfire and it works fine but the issue is with only 'Magic Bullet Looks' presets where the AE crashes.
So it cant be Windows 7, Vista or 32 bit or 64 bit issue. Probably a driver error or an internal Magic Bullet 1.4 or Adobe After Effects CS5 64 bit error.

Error when applying PI_BASIS patch SAPKIPYM03 on ECC 6

Dear Gurus,
I have ECC 6 running on Oracle 10.2.0.4 and my OS is SUSE LINUX ENT 1. My Kernel patch level also the latest one 236.
I am getting the following transport errors when i applying PI_BASIS patch SAPKIPYM03 via SPAM. Appreciate if someone can help me to resolve this issue.
S_LOG (i grep only the ERRORS in the log):-
/usr/sap/trans/log/SAPPIPYM03.NAG:4 ETW000 TRACE-INFO: 39: [dboci.c     ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12537
/usr/sap/trans/log/SAPPIPYM03.NAG:4 ETW000 TRACE-INFO: 41: [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12537'             19 0.182340
/usr/sap/trans/log/SAPPIPYM03.NAG:4 ETW000 TRACE-INFO: 57: [dboci.c     ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12537
/usr/sap/trans/log/SAPPIPYM03.NAG:4 ETW000 TRACE-INFO: 59: [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12537'             36 0.253573
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci.    ,00000] *** ERROR => Error 1089 in stmt_execute() from oci_execute_stmt(), orpc=0
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci.    ,00000] *** ERROR => ORA-1089 occurred when executing SQL stmt (parse error offset=0)
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCITransRollback' failed with rc=3114
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 TRACE-INFO: 41: [dboci.c     ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12537
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 TRACE-INFO: 43: [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12537'             80 3.439127
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 TRACE-INFO: 59: [dboci.c     ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12537
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 TRACE-INFO: 61: [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12537'             34 3.543518
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci.    ,00000] *** ERROR => Error 1089 in stmt_fetch() from oci_execute_stmt(), orpc=0
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci.    ,00000] *** ERROR => ORA-1089 occurred when executing SQL stmt (parse error offset=0)
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci.    ,00000] *** ERROR => Error 3114 in stmt_fetch() from oci_execute_stmt(), orpc=1
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci.    ,00000] *** ERROR => ORA-3114 occurred when executing SQL stmt (parse error offset=0)
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCITransRollback' failed with rc=3114
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci.    ,00000] *** ERROR => Error 1089 in stmt_execute() from oci_execute_stmt(), orpc=0
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci.    ,00000] *** ERROR => ORA-1089 occurred when executing SQL stmt (parse error offset=0)
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCITransRollback' failed with rc=3114
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci.    ,00000] *** ERROR => Error 1089 in stmt_fetch() from oci_execute_stmt(), orpc=0
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci.    ,00000] *** ERROR => ORA-1089 occurred when executing SQL stmt (parse error offset=0)
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci.    ,00000] *** ERROR => Error 3114 in stmt_execute() from oci_execute_stmt(), orpc=1
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dbsloci.    ,00000] *** ERROR => ORA-3114 occurred when executing SQL stmt (parse error offset=7)
/usr/sap/trans/log/SAPIIPYM03.NAG:4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCITransRollback' failed with rc=3114
Thanks & Regards,
Kalyan.

>   *** ERROR => CONNECT failed with sql error '12537'
Could you make sure that DB and listener run well? Please also log in OS as SIDADM and run r3trans -d
Regards,

When apply my ID and my PW to family condivision of itune for ipod, happen error 5506, why?

question: when apply my apple ID and my PW on itunes to get family condivision to another pc, it appear error 5506: why?

This makes sense to me. I think the issue is your misunderstanding. If you purchased an item, your Apple ID becomes tied to that permanently. So when you try to update that app, you need the password to the ID that 'OWNS' that application.
Also, I suspect you have a different ID signed into the device, which is why you can't buy with your own. That article listed shows how to change the signed in account.
iOS: Changing the signed-in iTunes Store account
http://support.apple.com/kb/HT1311

.dll errors when applying JanCPU

Hi,
I really need help in finding the issue as to why when applying the JanCPU2012 the prerequisite check "CheckActiveFilesAndExecutables" fail.
Its saying that some .dll executables are still running:
Running prerequisite checks...
Prerequisite check "CheckActiveFilesAndExecutables" failed.
The details are:
Following files are active :
E:\METANEO2\product\11.2.0\dbhome_1\bin\oraclient11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orageneric11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orapls11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oracommon11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oci.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oran11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orantcp11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oranro11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orannzsbb11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orazt11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oraztkg11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orasql11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oranls11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\orasnls11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oraxml11.dll
E:\METANEO2\product\11.2.0\dbhome_1\bin\oraasmclnt11.dll
ApplySession failed during prerequisite checks: Prerequisite check "CheckActiveF
ilesAndExecutables" failed.
System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
*1) OUI-67620:Interim patch 13413154 is a superset of the patch(es) [ 13038787 ]*
in the Oracle Home
OPatch failed with error code = 74
Here is what I have done and is still not working:
1) I have stopped all Oracle Services and Distributed Transaction Coordinator
2) I have downloaded Process Explorer and it is not showing me any of the .dll's that are supposedly running
Please let me know...
Thank you!!!
Saber

Hi Saber,
I actually faced this very same problem on windows 2008R2 boxes.
What i checked was to remane the dll's to make sure that they were not in use... and i actually could: so, Oracle reported a problem that did not feel true...
To get this going, i actually renamed all listed dll's, and restarted the installer... and no problem!
HTH,
Thierry

How to solve 'java/lang/OutOfMemoryError' when apply weblogic patch 10.3.6.0.10?

Hi All: Our platform is IBM AIX power system 64 bit, os level 6. Oracle Fusion Middleware version is 10.3.6.0.8. We tried to patch 10.3.6.0.10 on it, but encounter ‘out of memory error’ when applied WebLogic patch 10.3.6.0.10 on UAT report server. Currently UAT has 3GB memory (currently is 3G) .
JVMDUMP006I Processing dump event "systhrow",
detail "java/lang/OutOfMemoryError
JVMDUMP032I JVM requested Heap dump using
'/ora_bin01/u01/oracle/Middleware/utilhd' in response to an event
JVMDUMP010I Heap dump written to
/ora_bin01/u01/oracle/Middleware/utils/bsu/heapdump.20150224.152727.6422620.0001.phd
JVMDUMP032I JVM requested Java dump using
'/ora_bin01/u01/oracle/Middleware/utils/bsu/javacore.20150224.152727.6422620.0002.txt'
in response to an event
JVMDUMP010I Java dump written to
/ora_bin01/u01/oracle/Middleware/utils/bsu/javacore.20150224.152727.6422620.0002.txt
JVMDUMP032I JVM requested Snap dump using
'/ora_bin01/u01/oracle/Middleware/utils/bsu/Snap.20150224.152727.6422620.0003.trc'
in response to an event
JVMDUMP006I Processing dump event "systhrow",
detail "java/lang/OutOfMemoryError" - please wait.
JVMDUMP010I Snap dump written to
/ora_bin01/u01/oracle/Middleware/utils/bsu/Snap.20150224.152727.6422620.0003.trc
JVMDUMP013I Processed dump event "systhrow",
detail "java/lang/OutOfMemoryError".
JVMDUMP032I JVM requested Heap dump using
'/ora_bin01/u01/oracle/Middleware/utils/bsu/heapdump.20150224.152735.6422620.0004.phd'
in response to an event
JVMDUMP010I Heap dump written to
/ora_bin01/u01/oracle/Middleware/utils/bsu/heapdump.20150224.152735.6422620.0004.phd
JVMDUMP032I JVM requested Java dump using
'/ora_bin01/u01/oracle/Middleware/utils/bsu/javacore.20150224.152735.6422620.0005.txt'
in response to an event
JVMDUMP010I Java dump written to
/ora_bin01/u01/oracle/Middleware/utils/bsu/javacore.20150224.152735.6422620.0005.txt
JVMDUMP032I JVM requested Snap dump using
'/ora_bin01/u01/oracle/Middleware/utils/bsu/Snap.20150224.152735.6422620.0006.trc'
in response to an event
Exception in thread "main"
java.lang.OutOfMemoryError at
java.lang.StringBuffer.ensureCapacityImpl(StringBuffer.java:335)
at
java.lang.StringBuffer.append(StringBuffer.java:201)
at
java.lang.Class.throwNoSuchMethodException(Class.java:278)
at
java.lang.Class.getMethod(Class.java:845)
at
com.bea.cie.common.dao.xbean.XBeanDataHandler.isValueSet(XBeanDataHandler.java:958)
at
com.bea.cie.common.dao.xbean.XBeanDataHandler.getValueFromObject(XBeanDataHandler.java:589)
at
com.bea.cie.common.dao.xbean.XBeanDataHandler.getSimpleValue(XBeanDataHandler.java:431)
at
com.bea.plateng.patch.dao.cat.PatchDependency.getRule(PatchDependency.java:48)
at
com.bea.plateng.patch.dao.cat.PatchCatalogHelper.getInvalidatedPatchMap(PatchCatalogHelper.java:1625)
at com.bea.plateng.patch.PatchSystem.updatePatchCatalog(PatchSystem.java:436)
at
com.bea.plateng.patch.PatchSystem.refresh(PatchSystem.java:130)
at
com.bea.plateng.patch.PatchSystem.setCacheDir(PatchSystem.java:201)
at
com.bea.plateng.patch.Patch.main(Patch.java:281)
JVMDUMP010I Snap dump written to
/ora_bin01/u01/oracle/Middleware/utils/bsu/Snap.20150224.152735.6422620.0006.trc
JVMDUMP013I Processed dump event "systhrow",
detail "java/lang/OutOfMemoryError".
Exception in thread "Attach API wait loop"
java.lang.OutOfMemoryError
at
com.ibm.tools.attach.javaSE.CommonDirectory.waitSemaphore(CommonDirectory.java:222)
at
com.ibm.tools.attach.javaSE.AttachHandler$WaitLoop.waitForNotification(AttachHandler.java:329)
at com.ibm.tools.attach.javaSE.AttachHandler$WaitLoop.run(AttachHandler.java:396)
bsu.sh -install -patch_download_dir=/ora_bin01/u01/oracle/Middleware/utils/bsu/cache_dir -patchlist=12UV -prod_dir=/ora_bin01/u01/oracle/Middleware/wlserver_10.3
we followed the README.txt instructions, and stop/start weblogic service before/after apply patch. Can anyone suggest a solution or Doc ID for helping us?
thank you very much!

Solutions: Bounce the applications and check the arguments if you can increase it. It is due to memory issue
You can set these values in CommEnv.sh (.cmd for windows) file located in the weblogic_home/common/bin directory.
This gets applied to all the domains under that wls home.
If you want to make the changes to specific domain then edit the SetDomainEnv.sh file located under the domain/bin directory.
How to solve java.lang.OutOfMemoryError: Java heap space
solutions: export JVM_ARGS="-Xms1024m -Xmx1024m"
How to solve java.lang.OutOfMemoryError: PermGen space
solution : export JVM_ARGS="-XX:PermSize=64M -XX:MaxPermSize=256m"

Error in DMSYS.DBMS_JDM_INTERNAL when applying SVM regression model

Similar Messages

Maybe you are looking for