Error in DTW for Special Prices while using

Hi All,
while tryin to import Special prices through DTW, I'm gettin an error message, " No Price defined for item in selected price list". CAn anyone please suggest how to import special prices and whts the casue of this error??
Thanks in advance,
Joseph

Hi Joseph,
Check the link
Updating Special Prices via DTW
special prices
Re: Price List per Document Line
DTW Template for Uploading Special Prices for Business Partners.
*Close the thread if issue solved.
Regards
Jambulingam.P
Edited by: Jambulingam P on Jun 29, 2009 11:57 AM

Similar Messages

LIV - credit memo : error message shown for unit price variances

hi
In LIV for Credit Memo, there is no warning nor error message shown for unit price variances (price different from that in PO). Request not allow to have unit price variances for Credit Memo. pls advice how can i do it
thanks

Hi,
If you are posting a credit memo against a PO you cannot post it for MORE than the value of the PO, the system gives you the message that says something like, the value entered is higher than the PO value and so the PO value has been used.
Is this giving you a particular problem?
remember that youare generating the credit memo and so you can ask the vendor for whatever you want (although you may not actually get it). It is not like entering an invoice where the vendor is specifying the values.
Steve B

Error in loading data into essbase while using Rule file through ODI

Hi Experts,
Refering my previous post Error while using Rule file in loading data into Essbase through ODI
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule file to add values to existing values I am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
Chinnu

Hi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu

Condition Record for Special Price to First 10 customers

Hello All
there is a requirement from real estate client that they want to charge a special price to the first 10 customers purchasing their residential flat.Sale part is being handled thru SD only. Flats are created as Material master. Now as n number of Flats are created. So, thru Standard functionality, special price is required for first 10 customers who purchases these flats.
Thanks
Deepak Mehmi

Hello Deepak,
I think you are missing something. first of all let me tell you what is maxcond base value .
Maximum condition value
Specifies the maximum condition value for this condition record.
Use
You use this field to limit the use of a particular condition record to a specified total value.
Example
You offer a customer a special discount on a certain product but want to limit this discount to a specified total amount. You enter the maximum amount (for example, 1000 USD) in this field. As you process orders that use this condition record, the system updates the cumulative value. When the maximum value is reached, the system automatically deactivates the condition record in subsequent orders. In your case you decided to sell first 10 flats @ 100000 Rs, means total 10 lakhs
Mention this value here.
Once you mention this and start selling your flats, and system monitors this value, and soon as it reaches 10 lakhs, it will stop giving the discount to the customer. This is a control other than the no: of orders , it means you have here second control to control no: of orders, by no: wise and by value wise. I think you got what I mean.
Now coming back to your question :
as, for 11th order, the required price is different (e.g. Rs 2000 after 10th SO), where i'll maintain condition record with value Rs. 2000. ?
You have to maintain standard price in PR00 and any discounts should go for respective discount types and in your case it should be K004 condition type by going to VK12.
Again now please maintain max.condition value in K004 by ticking condition update at V/06 and coming back to vk12, selecting k004, and maintain your discounts, maxcondition value , no: of orders required etc. and save it.
I have repeted this in my sandbox this for you and got it right, then why not you. try it again, you will get it. Do it right.
All the best.
Sridhar.
Note
To see the current cumulative value for a particular condition record, you select Details -> Cumulative values in the overview screen of the condition record.

Special Price + Formatted Search for Special Price.

Hi all,
Appreciate some help here. Our client is using SAP B1 2007 Patch 38. AU/NZ localization, Local Currency = AUD.
Scenario:
Item A, Price List 1 = $2795, Price List display = 4 decimals, Price List Currency = USD
Special price for Item A has been set up as follows:
Step 1 - Go to Item> Price List> Price and Volumne Discount
Step 2 - The price and volumn discount screen opened. From the drop down, select price list and then select Item A by double clicking the line.
Step 3 - Period Discount screen opened. Valid from = 9th July 2008. Price = $2795.
Step 4 - Double click the line, Volume Discount Price List open, with the following details maintained.
Quantity=1, Discount=0, Special Price = $2795.
Quantity = 10, Discount=7.1556, Special Price = $ 2595.0010
Quantity = 100, Discount=10.0179, Special Price=$ 2514.9997
Question: we intend to put in Special price = $2595 and $2515, but SAP just does its own round up. Is there a way to work around?
Scenario 2:
To deal with the problem from Question 1, we have created a formatted search in the sales order and formatted search to round up the value in Line Total.
Column = Line Total
Trigger by = Quantity
Query = SELECT (case when $[$63.0.0]='USD' then Round($[$38.23.number],0) else $[$38.23.number] end)
Column = Quantity
Trigger by = Discount%
Query = SELECT $[$38.11.1]
The above set up works fine, if the user enter the quantity correctly the first time.
Eg:
User enter Qty = 10, SAP will display Discount = 7.1556 % and Line Total = $25,950.00 (Round up from $25950.01).
If user notice the quantity is wrong and then enter new quantity = 100, the discount remains at 7.1556%, it should be 10.0179%.
Question: Is there a way to work around this?

Hi Shawn ,
1.First check the decimal setting
a.Administration --> system intilisation --Document setting -- currency or by document --
b.System initiliaisation ---> general settng --->Display
c.Administration set up->Financial currency ---rounding --???
Currency setting overides the rounding method of procedure B
Scenario2
Since your trigger is dicount percentage , You will not get the desired output from the formatted search . Try to get the trigger at quantity .
Hope that helps
Bishal

Error: No data for binding key while generating WSDL

Hello users,
I have converted a custom rfc to webservice using Wizard tool. While generating WSDL file using Open WSDL document for selected binding of SOAMANAGER, i'm getting the error message 'No Data for Binding Key'.
Can anyone let me know the solution to resolve this issue? Also, I could note that the Object Status for this sevice reads Services: 0 / Endpoints: 0
Strangely, I tried to generate WSDL for another Custom Webservice and it did get generated but with 403 error page. and for this the Object Status read Services: 1 / Endpoints: 1.
Any information with respect to this is appreciated.
Thanks in advance.
Regards,
Naresh

Hi Naresh,
You have posted the question in the wrong forum, it should have been posted in Webdynpro.
Cheers,
Bhavana

Where condition for reading infotype while using ldb

hi
i want to read info from infotype p0000
using where condition eg: for pernr = ' '.
i am using LDB pnp.
how can i put the where condition while using macro
rp-provide-from-last.
regards
cs

in fact you don't have to get the values, you only need to tell to the program to take them into account :
GET PRPS.
CHECK SELECT-OPTIONS.

Toggling Location Services for apps to "While Using" not possible in iOS 8

So I've read one of the features in iOS 8 is being able to toggle the location services features of apps as follows:
Never
Always
While Using
I thought this would be useful because it could potentially help saving battery, however, I've only got the "Never" and "Always" options.
Only after opening an app have I found that the "Always" option switches to "While Using" , but then the "Always" option disappears. But this isn't true for all apps.
Is this an app specific "feature", then, as that's not how websites are labelling it.

Hello CCC,
It is happening on the following devices:
iPhone5
iPhone5s (two)
each have a "Family" generated iTunes account which has been associated to my iTunes account as the organizer. I would probably like to see it resolved on the iPhone5s (son and daughter) first and then the iPhone5 (wife).
2. I am also experiencing issues with "Mail" using IOS 8 in that email will not delete from my inboxes (same devices as above)...
3. I also have an issue with iCalendar not syncing events to my family members devices (iPhone5 and iPhone5S) using IOS 8. I entered my son's volleyball games into calendar on my macbook which is associated to my apple id as organizer and none of the other devices associated to other family iTunes account received the updates. I have an iPhone5 as well and I received the updates.
4. I am also experiencing issues with Family not recognizing pictures of family members which I have been trying to get fixed up.
I don't think I have ever experienced this many glitches when updating to a new version from Apple before:(. I sure hope this is not going to be the new norm.
I have also noticed that Health kit does not allow you to change the unit of measures within the application that it forces you to use the country's standard. This might be fine for younger individuals but as for me who grew up learning imperial and changed to metric halfway through school I would prefer the option to choose which unit of measure to use.
Thanks for taking the time to respond,
Dregor104

I am receiving an error message stating safari quit unepectedly while using the TelevisionFanaticToolBar plugin. Any ideas as to how to clear this so I can use Safari?

I am receiving a message stating that safari quit unexpectedly while using the TelevisionFanaticToolBar plugin. How to I clear this message so I can use Safari?

television fanatic toolbar corrupting...: Apple Support Communities

Special consideration for coding clients while using weblogic clustering

          Hi.
          I wanted to know whether there are any special consdirations to
          be taken while coding clients(servlets in our case) for EJBs when
          we are using clustering of App servers.
          In our setup, we are following the recommended 2-tier architecture
          for Weblogic5.1
          thanks and regards,
          Amol


Amol wrote:
          > Hi,
          > adding a couple of points to the previous mail:
          > 1. In case of servlet failure after doXXX() method has been
          > called and before the method returns, if the app server
          > fails, will doXXX() be called again on the servlet in the
          > secondary server?
          > 2. How much time does it take for the servlet session on
          > one machine to be replicated on the second machine when
          > using in-memory replication.
          It depends on the size of the object and complexity.
          -- Prasad
          >
          > Thanks,
          > Amol
          >
          > "Amol" <[email protected]> wrote:
          > >
          > >Hi kumar (and everybody),
          > >
          > >Your opinion resolves the doubt i had in mind, since even
          > >WebLogic
          > >docs do not say anything about clustering affecting the
          > >coding
          > >of bean clients.
          > >
          > >However may I request you to please evaluate the same
          > >query with
          > >respect to the following conditions:
          > >1. The Session bean calls a stored proc on the db. After
          > >the call
          > >to stored proc and before the stored proc returns with
          > >the results,
          > >the app server fails.
          > >Here there could be two cases of interest, a) Stored proc
          > >does
          > >a write on db -OR- b) Stored proc does only a read on
          > >db
          > >2. The Session bean calls an Entity bean which "writes"
          > >to the
          > >db. The db write is successful, but before the entire
          > >call to the
          > >session bean is completed(that is before user gets his
          > >results)
          > >the Server fails. Now permanent changes have been made
          > >to the db,
          > >but client doesnt get the results.
          > >
          > >Please note the fact that we are using recommended 2-tier
          > >architecture
          > >and in this case server failure would imply failure of
          > >Servlet
          > >as well as the beans.
          > >
          > >Regards,
          > >Amol
          > >--------------------------
          > >
          > >Kumar Allamraju <[email protected]> wrote:
          > >>Absolutely not. Make sure the objects you are putting
          > >>in the session are
          > >>serializable.
          > >>
          > >>
          > >>
          > >>Amol wrote:
          > >>
          > >>> Hi.
          > >>> I wanted to know whether there are any special consdirations
          > >>to
          > >>> be taken while coding clients(servlets in our case)
          > >>for EJBs when
          > >>> we are using clustering of App servers.
          > >>>
          > >>> In our setup, we are following the recommended 2-tier
          > >>architecture
          > >>> for Weblogic5.1
          > >>>
          > >>> thanks and regards,
          > >>> Amol
          > >>
          > >
          Cheers
          - Prasad

Preverify ERROR for in Eclipse while using SATSA-crypto.jar

I have created simple application to encrypt the string using Cipher class like below:
This code snippet I got from the forums.nokia;
In this The string "THIS IS A SECRET MESSAGE" is encrypted and decrypted using the key "SECRET!!" .
import java.security.InvalidKeyException;
import java.security.NoSuchAlgorithmException;
import javax.microedition.lcdui.Command;
import javax.microedition.lcdui.CommandListener;
import javax.microedition.lcdui.Displayable;
import javax.microedition.lcdui.Form;
import javax.microedition.lcdui.Item;
import javax.microedition.lcdui.TextBox;
import javax.microedition.lcdui.TextField;
import javax.crypto.BadPaddingException;
import javax.crypto.Cipher;
import javax.crypto.IllegalBlockSizeException;
import javax.crypto.NoSuchPaddingException;
import javax.crypto.ShortBufferException;
import javax.crypto.spec.SecretKeySpec;
public class FirstForm extends Form implements CommandListener {
     TextField txtData=new TextField("Enter the Data","",10,TextField.ANY);
     Command cmdEncrypt=new Command("Encrypt",Command.SCREEN,1);
     public FirstForm(String arg0)
          super(arg0);
          this.append(txtData);
          this.addCommand(cmdEncrypt);
          this.setCommandListener(this);
     public void commandAction(Command cmd, Displayable frm)
          if(cmd==this.cmdEncrypt)
               System.out.println("Command Is Pressed.......");
               byte[] msg = "THIS IS A SECRET MESSAGE".getBytes();
               byte[] enMsg = new byte[10000];
               byte[] deMsg = new byte[10000];
               //create new cipher using DES algorithm
               try {
                    Cipher c = Cipher.getInstance("DES");
                    //our raw byte[] key - please note that since we use DES algorithm,
                    //the key must be 8 bytes long
                    byte[] b = "SECRET!!".getBytes();
                    //init the cipher to encrypt the data
                    c.init(Cipher.ENCRYPT_MODE, new SecretKeySpec(b,0,b.length,"DES"));
                    int numBytes = c.doFinal(msg, 0, msg.length, enMsg, 0);
                    System.out.println("Encrypted Message is"+enMsg);
                    //init the cipher to decrypt the data
                    c.init(Cipher.DECRYPT_MODE, new SecretKeySpec(b,0,b.length,"DES"));
                    numBytes = c.doFinal(enMsg, 0, numBytes, deMsg, 0);
                    String s = new String(deMsg,0,numBytes);
                    System.out.println("Decrypted Message is"+s);
               } catch (InvalidKeyException e) {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
               } catch (NoSuchAlgorithmException e) {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
               } catch (NoSuchPaddingException e) {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
               } catch (IllegalStateException e) {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
               } catch (ShortBufferException e) {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
               } catch (IllegalBlockSizeException e) {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
               } catch (BadPaddingException e) {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
}after clicking on command button the Encrypted and decrypted sting is shown on the console
I have tested this code with wtk2.5.2.
This code works fine with sun'sWTK 2.5.2
But when; I have created project with the eclippse and wtk22
1) I added the satsa-crypto.jar in projrct->Properties->java-Builder-Path in "Library tab"
2)I Had also checked the checkbox before satsa-crypto.jar "Order-Of-Export Tab"
I am using the Ant Built
After Building I got Error saying::
Buildfile: D:\nitins_workspace\Encrypt\build.xml
init:
j2mepolish:
[j2mepolish] info: the license attribute is no longer supported. Please place your license.key file either to ${project.home} or to ${polish.home}.
[j2mepolish] J2ME Polish 2.0-RC4 (GPL License)
[j2mepolish] Loading device database...
[j2mepolish] Using locale [de_DE]...
[j2mepolish] assembling resources for device [Generic/midp2].
[j2mepolish] preprocessing for device [Generic/midp2].
[j2mepolish] compiling for device [Generic/midp2].
[j2mepolish-javac-Generic/midp2] Compiling 24 source files to D:\nitins_workspace\Encrypt\build\real\Generic\midp2\de_DE\classes
[j2mepolish] obfuscating for device [Generic/midp2].
[j2mepolish] proguard: ProGuard, version 3.5
[j2mepolish] proguard: Preparing output jar [D:\nitins_workspace\Encrypt\build\real\dest.jar]
[j2mepolish] preverifying for device [Generic/midp2].
[j2mepolish] preverify:Error preverifying class u
[j2mepolish] preverify:    VERIFIER ERROR u.a(ILm;Lw;)V:
[j2mepolish] preverify:Cannot find class com/sun/midp/ssl/Key
[j2mepolish] Preverify call failed: 1
[j2mepolish] C:\WTK22\bin\preverify.exe -classpath D:\Java\J2ME-Polish\import\midp-2.0.jar;D:\Java\J2ME-Polish\import\cldc-1.0.jar; -d D:\nitins_workspace\Encrypt\build\real\Generic\midp2\de_DE\obfuscated -nofp -nofinalize -nonative D:\nitins_workspace\Encrypt\build\real\Generic\midp2\de_DE\obfuscated
BUILD FAILED
D:\nitins_workspace\Encrypt\build.xml:109: Unable to preverify for device [Generic/midp2] - preverify returned result 1
Total time: 7 seconds What may be the reason of this??

I think you need to post the stack trace error message to get a response.

Error (Error when starting a SWITCH branch) while using container operation

HI Experts,
I am using container operation step for moving internal table (ref to sflight) to workarea.The error I found in the log is ' Error when starting a SWITCH branch'.Kindly help me in finding the solution.Below are the steps and code.
Result Element = lw_sflight             (Element ref to sflight with export and Import)
Assignment     =    =                     (Assign (contents of table are deleted first)
Expression      = &FLIGHT&             (Multi line container ref to sflight)
Operator          = Assignment
Expression      =                                 (Blank)
Thanks and Regards,
Srini

Hello,
Maybe you should show more information about the condition step instead of the container operation step.
A previous poster in SDN said they solved their problem by changing the order of the conditions.
regards
Paultje Bakker
Hanabi Technology

Configuration for extensions filter while using Tomahawk 1.1.6

Hello,
I am using Sun RI 1.1 with tomahawk 1.1.6 and using facelets.
I am stucked with following error:
SEVERE: Error Rendering View[/pages/employees-calendar.xhtml]
java.lang.IllegalStateException: ExtensionsFilter not correctly configured. JSF mapping missing. JSF pages not covered. Please see: http://myfaces.apache.org/tomahawk/extensionsFilter.html
     at org.apache.myfaces.renderkit.html.util.AddResourceFactory.throwExtensionsFilterMissing(AddResourceFactory.java:358)...My web.xml content for filters are as follows:
<filter>
    <filter-name>extensionsFilter</filter-name>
    <filter-class>org.apache.myfaces.webapp.filter.ExtensionsFilter</filter-class>
    <init-param>
         <description>Set the size limit for uploaded files.
            Format: 10 - 10 bytes
                    10k - 10 KB
                    10m - 10 MB
                    1g - 1 GB
        </description>
        <param-name>uploadMaxFileSize</param-name>
        <param-value>100m</param-value>
    </init-param>
    <init-param>
         <description>Set the threshold size - files
                below this limit are stored in memory, files above
                this limit are stored on disk.
            Format: 10 - 10 bytes
                    10k - 10 KB
                    10m - 10 MB
                    1g - 1 GB
        </description>
        <param-name>uploadThresholdSize</param-name>
        <param-value>100k</param-value>
    </init-param>
    <init-param>
          <description>Set the path where the intermediary files will be stored.</description>
     <param-name>uploadRepositoryPath</param-name>
     <param-value>/temp</param-value>
     </init-param>
</filter>
<filter-mapping>
     <filter-name>extensionsFilter</filter-name>
     <url-pattern>*.jsf</url-pattern>
</filter-mapping>
<filter-mapping>
     <filter-name>extensionsFilter</filter-name>
     <url-pattern>/faces/*</url-pattern>
</filter-mapping>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.jsf</url-pattern>
</servlet-mapping>Please suggest, If I am missing any thing. I have tried many link from google but could not get any solution for this.

Try mapping the filter by the servlet name, instead of my the URL.
    <filter-mapping>
        <filter-name>extensionsFilter</filter-name>
        <servlet-name>Faces Servlet</servlet-name>
    </filter-mapping>

No way 2 get FW800 bandwidth for my HDs while using a FW400 audio interface

I make music with my MBP. I use LaCie d2 hard disks, and a M-Audio FW410 audio interface.
I recently sold my MBP 2.0 to upgrade to the newer MBP 2.33, because I need FW800 bandwidth to get the maximum audio track count out of my system using Logic Pro and ProTools M-Powered.
I've made this work before on a G5 dual2.0 - by using only the front panel FW400 port, I was able to get the rear FW800 port to work at full bandwidth.
Not so with the new MBP.. I knew that plugging anything into the MBP's FW400 port would take the whole bus down to 400, so I purchased a SIIG FW 2-port ExpressCard/34 to create a separate FireWire bus, hoping that I could then use my FW410 interface with it @ 400Mb/sec, while keeping the LaCie drives alone on the FW800 port to get 800Mb/sec.
Unfortunately, as soon as the SIIG card is inserted, even though it does create a separate FW bus, it still takes the MBP's built-in FW bus down to 400Mb/sec!
This is poor design IMHO, because it means there is no way to use the full 800Mb/sec bandwidth of the FW800 port if you're trying to use any FW400 interface at the same time.. And of course other than RME's FireFace800, nearly all audio interfaces work at 400Mb/sec. And since I also use ProTools M-Powered, it's not even an option.
Why does the old G5 have properly separate FW controllers, but the new MBP does not?
My only option now to get a SATA ExpressCard/34 and new SATA enclosures for all my drives.. Needless to say I'm not happy and wish Apple would publish more detailed info about such things!
MBP 2.33 Intel Core 2 Duo Mac OS X (10.4.8) 2Gb Ram, LaCie d2 HDs, M-Audio FW410, SIIG Exp34 2-port FW card

That is very interesting.
I understand your dillema and have to agree with you that Apple should publish this information.
It does rather compramise the addition of the fw800 port and one would naturally assume that the two busses were seperate.
The lack of info from Apple is reflected in the fact that those who read this forum are significantly more knowledgeable than those who work for Apple.
Well done for posting this.
If anyone can confirm it with a second opinion we can then rest assured in our greater knowledge.
Apple - - - once again get with it and drop the secrecy.

Forcing a special order while using a panelTabbedPane

Hello all,
I have created a "panelTabbedPane" with 5 tabs. Every tab has it's own managed bean. The scope for each bean is declared as "request"
After pressing a commandLink I want to collect the data entered into the tabs and store it to the database.
CODE SNIPPPET OF THE JSP:
<t:panelTabbedPane bgcolor="#FFFFCC" >
<f:subview id="viewTab1" >
<jsp:include page="./CreateBiddingTabCustomerData.jsp"/>
</f:subview>
<f:subview id="viewTab2" >
<jsp:include page="./CreateBiddingTabIndividualText.jsp"/>
</f:subview>
<f:subview id="viewTab3" >
<jsp:include page="./CreateBiddingTabOfferPositions.jsp"/>
</f:subview>
<f:subview id="viewTab4" >
<jsp:include page="./CreateBiddingTabPaymentConditions.jsp"/>
</f:subview>
<f:subview id="viewTab5" >
<jsp:include page="./CreateBiddingTabPreview.jsp"/>
</f:subview>
</t:panelTabbedPane>
          <t:commandLink
               value="Collect"
               action="#{TabCollectBean.getData}">
          </t:commandLink>
The TabCollectBean gets the RequestMap like this:
Map map = initialSetup.facesContext.getExternalContext().getRequestMap();
Now you can loop through the Map and get each managed bean of the Tab,
that's the assumption.
THE PROBLEM:
Yesterday the application was first going into each managed bean per tab and at the end the TabCollectBean was called. Today it's vice versa and nothing is working.
How can I force JSF to call first the managed beans for the tabs???
Thanks for all answers
Mario

I am trying to use <t:panelTabbedpane> but i am unable to use it
i am trying myfaces1.1.2 jars and tomahawk1.1.2 jars
is this version of myfaces support <t:panelTabbedpane>
i am able to use use <t:inputDate> but unable to use <t:panelTabbedpane>
my code is :::
<t:panelTabbedPane bgcolor="#FFFFCC">
<t:panelTab label="Tab 1">
<f:verbatim><H1>Tab 1</H1></f:verbatim>
</t:panelTab>
<t:panelTab label="Tab 2">
<f:verbatim><H1>Tab 2</H1></f:verbatim>
</t:panelTab>
<t:panelTab label="Tab 3">
<f:verbatim><H1>Tab 3</H1></f:verbatim>
</t:panelTab>
</t:panelTabbedPane>
i m getting message::::
javax.faces.FacesException: org.apache.jasper.JasperException
     at org.apache.myfaces.context.servlet.ServletExternalContextImpl.dispatch(ServletExternalContextImpl.java:425)
     at org.apache.myfaces.application.jsp.JspViewHandlerImpl.renderView(JspViewHandlerImpl.java:234)
     at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:300)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:95)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.myfaces.component.html.util.ExtensionsFilter.doFilter(ExtensionsFilter.java:122)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:213)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2422)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:163)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:199)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:828)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:700)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:584)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)
Pls help me by suggesting
me that are the actual requirement for using this component and where is the probable area of error, and what i can do to make it running
thanks in advance

Error in DTW for Special Prices while using

Similar Messages

Maybe you are looking for