Error in dump file

Hi,
I am getting below error in one of the dump file created in /udump directory but I am not sure if this is a warning of some disaster or what:
kvotlgev: epc event: 9 failed. EPC error: 167
But I could not see any error in alert log related to this.
Any thought?
TIA
Onkar

onkar.nath wrote:
Hi,
I am getting below error in one of the dump file created in /udump directory but I am not sure if this is a warning of some disaster or what:
kvotlgev: epc event: 9 failed. EPC error: 167
But I could not see any error in alert log related to this.
Any thought?
TIA
OnkarHi Onkar
These kind of errors could be read by Oracle Support. If you think it's important to you to understand this error, open SR

Similar Messages

  • Error during dump file Import  from 11g DB into XE database

    Hi ,
    I have a dump file exported from a 11g database. First i imported this dump file into another 11gdb test database and it worked fine.
    Later i tried to import it into an XE database. But import completed with error message as shown below. This error message appeared only for few tables.
    IMP-00015: following statement failed because the object already exists:
    Note - I created a new schema in XE database and tried to import the dump into this schema. So there is no chance for the object to exist before the import operation.
    Does anyone have any idea why import in XE fails? Is there any limitation/restriction in XE?
    FYI - All the tables that failed to import contains LOB data in it. Is LOB datatype is not supported in XE? Does this cause the problem during import?
    Regards,
    Ashok Kumar.G

    Going from 11g to XE(10g) is problematic for two reasons 1st - 11g exports not necessarily compatible with an earlier version and 2nd I have found that in some cases 11g exports can have problems when importing back into another 11g(11.1.0.7) instance due to stack overruns whereas an 10g export to 11g normally works fine..
    ./bob h.

  • Error while restoring a dump file

    Hello,
    While import a dump file i receive error as below. even i try to restore this table separately i get the same issue.
    Can anyone comment on this.
    ORA-31693: Table data object "A_DDAPTE1"."FQQQ_CCCC001" failed to load/unload and is being skipped due to error:
    ORA-29913: error in executing ODCIEXTTABLEFETCH callout
    ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00217: invalid character 23 (U+0017)
    Error at line 1
    Thanks,
    Vinodh

    yes looks similar even the client recently upgrade from 10gR2 to 11gR2.
    Infact i found a fix for this similar issue but even with this fix installation i had same problem.
    Patch: 11877267 – EXPDP/IMPDP ARE NOT ABLE TO HANDLE HEXADECIMAL CHARACTER REFERENCES IN XMLTYPE
    Thanks,
    Vinodh

  • Error while importing a dump file in my local database

    Hi,
    I have a dump file named *"system_21Sep2010_DVSD.DMP"* which i'm trying to import in my local database named *"nandita1"*.
    The dump file is found under the following path *"C:\DevSuiteHome_1\BIN"* and i executed the following command for importing the dump file:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP FULL=YES
    I'm getting the following error while importing the dump file:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:25:37 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    IMP-00015: following statement failed because the object already exists:
    "CREATE UNDO TABLESPACE "UNDOTBS1" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DV"
    "SD/undotbs01.dbf' SIZE 104857600 AUTOEXTEND ON NEXT 5242880 MAXSIZE "
    "32767M EXTENT MANAGEMENT LOCAL "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "SYSAUX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/sysa"
    "ux01.dbf' SIZE 367001600 AUTOEXTEND ON NEXT 10485760 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANA"
    "GEMENT AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TEMPORARY TABLESPACE "TEMP" BLOCKSIZE 8192 TEMPFILE '/oradata_dev/D"
    "VSD/temp01.dbf' SIZE 20971520 AUTOEXTEND ON NEXT 655360 MAXSIZE 3276"
    "7M EXTENT MANAGEMENT LOCAL UNIFORM SIZE 1048576"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "USERS" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/users"
    "01.dbf' SIZE 5242880 AUTOEXTEND ON NEXT 1310720 MAXSIZE 32767M EXTEN"
    "T MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMEN"
    "T AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_DATA" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX_"
    "DATA01.dbf' SIZE 140509184 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M"
    " EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_INDEX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX"
    "_INDEX.dbf' SIZE 93323264 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE PROFILE "MONITORING_PROFILE" LIMIT COMPOSITE_LIMIT DEFAULT SESSIONS_"
    "PER_USER DEFAULT CPU_PER_SESSION DEFAULT CPU_PER_CALL DEFAULT LOGICAL_READS"
    "_PER_SESSION DEFAULT LOGICAL_READS_PER_CALL DEFAULT IDLE_TIME DEFAULT CONNE"
    "CT_TIME DEFAULT PRIVATE_SGA DEFAULT FAILED_LOGIN_ATTEMPTS UNLIMITED PASSWOR"
    "D_LIFE_TIME DEFAULT PASSWORD_REUSE_TIME DEFAULT PASSWORD_REUSE_MAX DEFAULT "
    "PASSWORD_LOCK_TIME DEFAULT PASSWORD_GRACE_TIME DEFAULT"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OUTLN" IDENTIFIED BY VALUES '4A3BA55E08595C81' TEMPORARY TABLE"
    "SPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "TSMSYS" IDENTIFIED BY VALUES '3DF26A8B17D0F29F' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "ANONYMOUS" IDENTIFIED BY VALUES 'anonymous' DEFAULT TABLESPACE"
    " "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OLAPSYS" IDENTIFIED BY VALUES '3FB8EF9DB538647C' DEFAULT TABLE"
    "SPACE "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MDDATA" IDENTIFIED BY VALUES 'DF02A496267DEE66' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SYSMAN" IDENTIFIED BY VALUES '28F72A3C2D75FDE9' DEFAULT TABLES"
    "PACE "SYSAUX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MGMT_VIEW" IDENTIFIED BY VALUES '442167C25FAC883C' TEMPORARY T"
    "ABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SCOTT" IDENTIFIED BY VALUES 'F894844C34402B67' DEFAULT TABLESP"
    "ACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWA" IDENTIFIED BY VALUES '2672292A792DB64B' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWA" IDENTIFIED BY VALUES 'F5C178B2796496F4' DEFAULT TABLES"
    "PACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWS" IDENTIFIED BY VALUES '06D47E0665132890' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXSUC" IDENTIFIED BY VALUES '1705C688518ADCDC' DEFAULT TABLE"
    "SPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "JIRAUSER" IDENTIFIED BY VALUES 'F0E1C662FCD1E09F' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSFA" IDENTIFIED BY VALUES 'C3DFA37A29E072B6' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDW" IDENTIFIED BY VALUES 'CFF3D9B1B6C20DCC' DEFAULT TABLESP"
    "ACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWS" IDENTIFIED BY VALUES '9EF0EE1BAC5855C4' DEFAULT TABLES"
    "PACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSUC" IDENTIFIED BY VALUES '39594B53A6F1CED0' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SELECT_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SELECT_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EXECUTE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EXECUTE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "DELETE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "DELETE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "RECOVERY_CATALOG_OWNER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "RECOVERY_CATALOG_OWNER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GATHER_SYSTEM_STATISTICS""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "GATHER_SYSTEM_STATISTICS" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "LOGSTDBY_ADMINISTRATOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "LOGSTDBY_ADMINISTRATOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_ADMINISTRATOR_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_USER_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AQ_USER_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GLOBAL_AQ_USER_ROLE" IDENTIFIED GLOBALLY "
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SCHEDULER_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SCHEDULER_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "HS_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "HS_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AUTHENTICATEDUSER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AUTHENTICATEDUSER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_ADVISOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_ADVISOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_MONITOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_MONITOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "WM_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "WM_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAUSERPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAUSERPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAIDPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAIDPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVASYSPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVASYSPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVADEBUGPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVADEBUGPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EJBCLIENT""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EJBCLIENT" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_DEPLOY""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_DEPLOY" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "CTXAPP""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "CTXAPP" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBWEBSERVICES""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBWEBSERVICES" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_DBA""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_DBA" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_USER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_USER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "MGMT_USER""
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_GENERIC" MINVALUE 1 MAXVALUE 4294967295 INCR"
    "EMENT BY 1 START WITH 1 CACHE 50 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_ID" MINVALUE 1 MAXVALUE 4294967295 INCREMENT"
    " BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_EVOLVE_SEQ$" MINVALUE 1 MAXVALUE 999999999999999999"
    "999999999 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_SEQ$" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_UIDS$" MINVALUE 1 MAXVALUE 999999999999999999999999"
    "999 INCREMENT BY 1 START WITH 100 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVORS_S" MINVALUE -2147483647 MAXVALUE 214748364"
    "7 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVOR_NAME_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REPPROP_KEY" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT_LOG_SEQUENCE" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REFRESH_TEMPLATES_S" MINVALUE 1 MAXVALUE 999999999"
    "999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_AUTHORIZATIONS_S" MINVALUE 1 MAXVALUE 9999999"
    "99999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_REFGROUPS_S" MINVALUE 1 MAXVALUE 99999999"
    "9999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_OBJECTS_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_PARMS_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_PARM_VALUES_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_SITES_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMP_OUTPUT_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_RUNTIME_PARMS_S" MINVALUE 1 MAXVALUE 9999999999999"
    "99999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "TEMPLATE$_TARGETS_S" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_EXCEPTIONS_S" MINVALUE 1 MAXVALUE 9999999999999999"
    "99999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    . importing OLAPSYS's objects into OLAPSYS
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_ID_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 122 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_IRID" MINVALUE 1 MAXVALUE 999999999999999999999999999"
    " INCREMENT BY 1 START WITH 24 NOCACHE ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've been waiting for hours, but still it is blocked at the same place, that is:
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've tried recreating the database, but still the error is the same.
    I've tried including the ignore=Y, that is:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP
    FULL=YES IGNORE=YES
    The error generated is as displayed below:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:34:04 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    . importing OLAPSYS's objects into OLAPSYS
    Over here also, i had to kill the process since it was blocked at the following statement: ". importing OLAPSYS's objects into OLAPSYS"
    Please can someone help me out.
    Thanking in advanced

    plzzzzzzzzzzzzzzzzz.............sme1 help me out

  • Error while importing dump file to Oracle server

    Hi All,
    I'm pretty new to Oracle and I need to do the following job:
    - import data from dump file to Oracle server
    - then export it into CSV format to load to our web system
    Oracle dump file is called EXPDAT.DMP and it is placed in the default location, so no need to specify it. Here I'm trying to do the 1st step:
    impdp SYSTEM/XXXXXX REMAP_SCHEMA=DATA01:SYSTEM
    And then I'm getting the following errors:
    Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_FULL_01": SYSTEM/******** REMAP_SCHEMA=DATA01:SYSTEM
    Processing object type TABLE_EXPORT/TABLE/TABLE
    ORA-39083: Object type TABLE failed to create with error:
    ORA-00959: tablespace 'K_DATA' does not exist
    But tablespace 'K_DATA' exists in Oracle database (I've created it manually). What does it mean? Is it a permission issue? Or may be there is more simple way to accomplish my task? Please help me! Thank you!

    Create the user DATA01 in your database, with sufficient quota on tablespace K_DATA. DO NOT import another schema's objects into SYSTEM. If you must REMAP_SCHEMA to something other than DATA01, create a user other than SYSTEM to receive it.

  • I am getting an error ORA-39143 when importing a dump file

    I get ORA-39143: dump file "c:\oraload\expdat.dmp" may be an original export dump file
    when importing a dump file created by 9.2 exp into 10.2 database using impdp
    I need to use the impdp utility with the table_exists_action option which doesn't appear to exist in imp
    What is the proper mix of versions/flags/options to export from a 9.2 database and import into an existing 10.2 database while replacing existing data?
    thanks

    well its on the link i provided
    "When tables are manually created before data is imported, the CREATE TABLE statement in the export dump file will fail because the table already exists. To avoid this failure and continue loading data into the table, set the import parameter IGNORE=y. Otherwise, no data will be loaded into the table because of the table creation error."
    original import tries to append (insert)
    there is no parameter here like table_exists_action=truncate/replace
    1. drop all the tables (dynamic sql), so there will be no errors because of already existent tables
    or
    2. truncate all the tables (dynamic sql) + use IGNORE=Y
    (or
    3. drop the whole schema in target database, recreate it, then do the import)

  • "SP2-0734: unknown command..." error while importing a dump file

    hello,
    i want to import a dump file into my database named orcl, and i come accross the same error after executing the import command. my import command is:
    SQL> imp mvdemo/mvdemo file=mvdemo.dmp full=y ignore=y
    i use oracle 10g enterprise edition.
    i created the user mvdemo/mvdemo.
    the error i see in my screen is:
    SP2-0734: unknown command beginning "imp mvde..." - rest of line ignored.
    for a long period of time, i havent used oracle dbms. before, i remember that i used enterprise manager in import/export processes. however, i am not able to find the enterprise manager in 10g options now. do i have to install the enterprise manager seperately in oracle 10g enterprise edition? may this problem be relational with this matter?
    if someone could answer, i would be greatful.
    best regards

    Import is run from the command prompt, not the SQL prompt.

  • IMP-00067 Error while trying to import demo mapviewer dump files

    Getting IMP-00067 Error while trying to import demo dump files
    C:\oraclexe\app\oracle\product\10.2.0\server\BIN>imp mvdemo/mvdemo file=C:\oracl
    exe\app\oracle\admin\XE\dpdump\usstates.dmp full=y ignore=y
    Import: Release 10.2.0.1.0 - Production on Sun Mar 21 19:25:44 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Productio
    n
    Export file created by EXPORT:V10.02.00 via conventional path
    Warning: the objects were exported by SCOTT, not by you
    import done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
    import server uses AL32UTF8 character set (possible charset conversion)
    export client uses US7ASCII character set (possible charset conversion)
    IMP-00067: Could not convert to server character set's handle
    IMP-00000: Import terminated unsuccessfully
    Regards
    Thomas

    Have you resolve this? I am running in to same error.

  • Oracle Dump file Import Error

    Hello,
    I need an urgent reply on this. Im trying to import a dump file which was created in Oracle 10.2 on an Xp system to Oracle 10.1 on Win2003 server. Pls find below the error encountered.
    Regards
    Kazeem
    IMP-00008: unrecognized statement in the export file:
    IMP-00017: following statement failed with ORACLE error 2248:
    "ALTER SESSION SET PLSQL_OPTIMIZE_LEVEL = 1 NLS_LENGTH_SEMANTICS = 'BYTE' PL"
    "SQL_CODE_TYPE = 'INTERPRETED' PLSQL_DEBUG = FALSE PLSQL_WARNINGS = 'DISABLE"
    ":ALL'PLSQL_CCFLAGS = ''"
    IMP-00003: ORACLE error 2248 encountered
    ORA-02248: invalid option for ALTER SESSION
    IMP-00000: Import terminated unsuccessfully

    Hello,
    I need an urgent reply on this. Im trying to import aYou have already gotten valid answers in your first thread here:
    Importing Oracle DB dump file
    dump file which was created in Oracle 10.2 on an Xp
    system to Oracle 10.1 on Win2003 server. Pls findYou cant. As already told, you need to redo the export with 10.1 exp utility against the 10.2 database. (so to produce a dump file that your 10.1 db understands)
    IMP-00008: unrecognized statement in the export file:

  • Error when trying SHOW=Y on dump file

    Hi All,
    Source: Oracle 10G on Windows 2003
    Target: Oracle 11G r2 on Windows 2008 R2
    I have a dump file created from the source as :
    exp 'sys/password@production as sysdba' file=F:\Export\mmsprd.dmp full=yes log=F:\Export\mmsprd.logAfter doing:
    imp 'sys/password@production as sysdba' file=F:\ORACLEDUMP\mmsprd.dmp log=F:\ORACLEDUMP\mmsprd_import.log full=y ignore=y commit=y buffer=60000000I realize that 1300+ views are missing for a certain schema - the import log file shows that it did import x number of views for that schema but doesn't have any entries for the missing ones.
    So now i want to check if the mmsprd.dmp file i've created in the xport actually has those missing views.
    So, on the target machine, i try:
    imp sys/manager SHOW=Y file=mmsprd.DMPBut i get the following error:
    Import: Release 11.2.0.3.0 - Production on Mon May 27 22:45:28 2013
    Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
    Connected to: Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
    Export file created by EXPORT:V10.02.01 via conventional path
    import done in WE8MSWIN1252 character set and UTF8 NCHAR character set
    IMP-00031: Must specify FULL=Y or provide FROMUSER/TOUSER or TABLES arguments
    IMP-00000: Import terminated unsuccessfullyAny ideas what's wrong? I just want to double-check if my export dump has the missing views and something went wrong during import OR if the export dump didn't have them to begin with.
    Thanks in advance.

    Hi,
    You just need to say full=y and show=y in the same command line - this won't actually do a full import but it will tell oracle what out of the dumpfile you want to havein the file that show=y will create.
    Regards,
    Harry
    http://dbaharrison.blogspot.com/

  • 0x7_8 stop error caused by NTFS.SYS , please help with dump file analysis

    My 2003 server rebooted unexpected twice today and yesterday.
    I've run Windbg to analysis the dump file, but i really don't know what to do next to resolve my problem.
    Can any one give some suggestion? thanks in advance.
    Resetting default scope
    DEFAULT_BUCKET_ID:  DRIVER_FAULT
    PROCESS_NAME:  csrss.exe
    FAILURE_BUCKET_ID:  0x7f_8_Ntfs+5f74
    BUCKET_ID:  0x7f_8_Ntfs+5f74
    Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\temp\ads02 memory dump 20140218\MEMORY_20140217.DMP]
    Kernel Summary Dump File: Only kernel address space is available
    WARNING: Whitespace at end of path element
    Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols.sympath
    Executable search path is:
    Windows Server 2003 Kernel Version 3790 (Service Pack 2) MP (4 procs) Free x86 compatible
    Product: LanManNt, suite: TerminalServer SingleUserTS
    Built by: 3790.srv03_sp2_qfe.130703-1535
    Machine Name:
    Kernel base = 0x80800000 PsLoadedModuleList = 0x808a8ee8
    Debug session time: Mon Feb 17 08:37:34.653 2014 (UTC + 8:00)
    System Uptime: 1 days 2:57:43.093
    WARNING: Process directory table base BFF9C6C0 doesn't match CR3 005F2000
    WARNING: Unable to reset page directories
    Loading Kernel Symbols
    Loading User Symbols
    WARNING: Process directory table base BFF9C6C0 doesn't match CR3 005F2000
    Unable to get PEB pointer
    Loading unloaded module list
    *                        Bugcheck Analysis                                   
    Use !analyze -v to get detailed debugging information.
    BugCheck 7F, {8, 80042000, 0, 0}
    *** WARNING: Unable to verify timestamp for mssmbios.sys
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    *** WARNING: Unable to verify timestamp for Ntfs.sys
    *** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
    Unable to read selector for PCR for processor 1
    Unable to read selector for PCR for processor 2
    Unable to read selector for PCR for processor 3
    Unable to read selector for PCR for processor 1
    Unable to read selector for PCR for processor 2
    Unable to read selector for PCR for processor 3
    Probably caused by : Ntfs.sys ( Ntfs+5f74 )
    Followup: MachineOwner
    0: kd> !analyze -v
    *                        Bugcheck Analysis                                   
    UNEXPECTED_KERNEL_MODE_TRAP (7f)
    This means a trap occurred in kernel mode, and it's a trap of a kind
    that the kernel isn't allowed to have/catch (bound trap) or that
    is always instant death (double fault).  The first number in the
    bugcheck params is the number of the trap (8 = double fault, etc)
    Consult an Intel x86 family manual to learn more about what these
    traps are. Here is a *portion* of those codes:
    If kv shows a taskGate
            use .tss on the part before the colon, then kv.
    Else if kv shows a trapframe
            use .trap on that value
    Else
            .trap on the appropriate frame will show where the trap was taken
            (on x86, this will be the ebp that goes with the procedure KiTrap)
    Endif
    kb will then show the corrected stack.
    Arguments:
    Arg1: 00000008, EXCEPTION_DOUBLE_FAULT
    Arg2: 80042000
    Arg3: 00000000
    Arg4: 00000000
    Debugging Details:
    Unable to read selector for PCR for processor 1
    Unable to read selector for PCR for processor 2
    Unable to read selector for PCR for processor 3
    Unable to read selector for PCR for processor 1
    Unable to read selector for PCR for processor 2
    Unable to read selector for PCR for processor 3
    BUGCHECK_STR:  0x7f_8
    TSS:  00000028 -- (.tss 0x28)
    eax=00000000 ebx=8b4f1100 ecx=8ac87d03 edx=8687ddc0 esi=b83481a0 edi=b8348028
    eip=f7addf74 esp=b8348000 ebp=b8348014 iopl=0         nv up ei pl nz na po nc
    cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010202
    Ntfs+0x5f74:
    f7addf74 0000            add     byte ptr [eax],al          ds:0023:00000000=??
    Resetting default scope
    DEFAULT_BUCKET_ID:  DRIVER_FAULT
    PROCESS_NAME:  csrss.exe
    CURRENT_IRQL:  1
    LAST_CONTROL_TRANSFER:  from 00000000 to f7addf74
    STACK_TEXT: 
    b8348014 00000000 00000000 00000000 00000000 Ntfs+0x5f74
    STACK_COMMAND:  .tss 0x28 ; kb
    FOLLOWUP_IP:
    Ntfs+5f74
    f7addf74 0000            add     byte ptr [eax],al
    SYMBOL_STACK_INDEX:  0
    SYMBOL_NAME:  Ntfs+5f74
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: Ntfs
    IMAGE_NAME:  Ntfs.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  0
    FAILURE_BUCKET_ID:  0x7f_8_Ntfs+5f74
    BUCKET_ID:  0x7f_8_Ntfs+5f74
    Followup: MachineOwner

    According to your post bug check 0x7F is recorded. Bug check 0x7F typically occurs after you install a faulty or mismatched hardware (especially memory) or if installed hardware fails.
    I suggest you check below link and troubleshoot it accordingly.
    Bug Check 0x7F 
    Regards, Ravikumar P

  • Dump file with error C0000005 ACCESS_VIOLATION exec_sq close_connection

    Hi
    I am seeing a really odd problem
    I am calling a 6i client/server form from a 10g webform using webutil_host. Sounds mad I know, but the 6i form uses the Open Client Adapter to connect to sql server via odbc using exec_sql.
    The client/server form works fine until I try to exec_sql.close_connection. A dump file is produced containing the error C0000005 ACCESS_VIOLATION. If I call the client/server form from the webform using webutil_host the dump file is produced on the desktop. If I run the client/server form directly the dump file is produced in c:\orant
    I have 2 questions:
    1. Does anybody have any ideas why the access violation is caused?
    2. Why does webutil_host produce a dump file on the desktop and can it be changed?
    thanks
    paul

    did you ever figure this out? I am having a similar problem on a new install. This blow out is happening quite frequently. the forms do not blow out on a windows 95 machine but blow out on windows 2k and xp.

  • Error of cleaning the dump file

    Hi all experts,
    My following scripts are giving me error. Our kindly feed back will be very helpful.
    #!/bin/ksh
    set -x
    exec>/u01/oradata/kup_$$.log 2>&1
    # How many days the dump files should be kept
    days_back=5
    # Add path variable to find the .oraenv command
    PATH="$PATH:$ORACLE_HOME/bin"; export PATH
    ORACLE_HOME=/u01/app/oracle/product/10.2; export ORACLE_HOME
    ORACLE_SID=PPRD; export ORACLE_SID
    # If a SID is provided as an argument it will be set and oraenv run
    # Otherwise the current system SID can be used. If no SID is set or provided
    # an error message is displayed and script exist with the status code 1
    if [ $1 ]
    then
    ORACLE_SID=$1
    ORAENV_ASK=NO
    . oraenv
    else
    if [ ! $ORACLE_SID ]
    then
    echo "Error: No ORACLE_SID set or provided as an argument"
    exit 1
    fi
    fi
    # Set the ORACLE_BASE variable
    ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
    # Clean the files matching both the names and modifid criteria
    # Out of each directory with a fiind command with an execute clause
    find $ORACLE_BASE/admin/$ORACLE_SID/adump/ -name "*.aud" -mtime+$days_back \-exec rm {} \;
    find $ORACLE_BASE/admin/$ORACLE_SID/bdump/ -name "*.trc" -mtime+$days_back \-exec rm {} \;
    find $ORACLE_BASE/admin/$ORACLE_SID/cdump/ -name "*.trc" -mtime+$days_back \-exec rm {} \;
    find $ORACLE_BASE/admin/$ORACLE_SID/udump/ -name "*.trc" -mtime+$days_back \-exec rm {} \;
    exit;
    The error is below,
    ++ days_back=5
    ++ PATH=/usr/sbin:/usr/jdk/j2sdk1.4.2_15/bin:/usr/bin:/usr/local/bin:/usr/X/bin:/usr/sfw/bin:/opt/csw/bin:/opt/SUNWspro/bin:/opt/microfocus/cobol/bin:/usr/cc
    s/bin:/usr/bin:/bin
    ++ export PATH
    ++ ORACLE_HOME=/u01/app/oracle/product/10.2
    ++ export ORACLE_HOME
    ++ ORACLE_SID=PPRD
    ++ export ORACLE_SID
    ++ '[' ']'
    ++ '[' '!' PPRD ']'
    ++ ORACLE_BASE=/u01/app/oracle
    ++ export ORACLE_BASE
    ++ find /u01/app/oracle/admin/PPRD/adump/ -name '*.aud' -mtime+5 -exec rm '{}' ';'
    find: bad option -mtime+5find: [-H | -L] path-list predicate-list
    ++ find /u01/app/oracle/admin/PPRD/bdump/ -name '*.trc' -mtime+5 -exec rm '{}' ';'
    find: bad option -mtime+5
    find: [-H | -L] path-list predicate-list
    ++ find /u01/app/oracle/admin/PPRD/cdump/ -name '*.trc' -mtime+5 -exec rm '{}' ';'
    find: bad option -mtime+5
    find: [-H | -L] path-list predicate-list
    ++ find /u01/app/oracle/admin/PPRD/udump/ -name '*.trc' -mtime+5 -exec rm '{}' ';'
    find: bad option -mtime+5
    find: [-H | -L] path-list predicate-list
    ++ exit

    It shows the following output in my log file,
    ++ days_back=5
    ++ PATH=/usr/sbin:/usr/jdk/j2sdk1.4.2_15/bin:/usr/bin:/usr/local/bin:/usr/X/bin:/usr/sfw/bin:/opt/csw/bin:/opt/SUNWspro/bin:/opt/microfocus/cobol/bin:/usr/cc
    s/bin:/usr/bin:/bin
    ++ export PATH
    ++ ORACLE_HOME=/u01/app/oracle/product/10.2
    ++ export ORACLE_HOME
    ++ ORACLE_SID=PPRD
    ++ export ORACLE_SID
    ++ '[' ']'
    ++ '[' '!' PPRD ']'
    ++ ORACLE_BASE=/u01/app/oracle
    ++ export ORACLE_BASE
    ++ find /u01/app/oracle/admin/PPRD/adump/ -name '*.aud' -mtime +5 -exec rm '{}' ';'
    ++ find /u01/app/oracle/admin/PPRD/bdump/ -name '*.trc' -mtime +5 -exec rm '{}' ';'
    ++ find /u01/app/oracle/admin/PPRD/cdump/ -name '*.trc' -mtime +5 -exec rm '{}' ';'
    ++ find /u01/app/oracle/admin/PPRD/udump/ -name '*.trc' -mtime +5 -exec rm '{}' ';'
    /u01/oradata>
    How i could know if it is running or not?

  • [HELP] How to solve this error on export dump file?

    Dearsir,
    I run oracle 9.2.0.4 on RHEL3 update 2. I always had this error messege when I 'm trying to make dump file from client using windos 2000.
    this message is also apprear when I try to make dump file from linux as well.
    hope somebody tell me the way to solve this, coz I'm knew on linux world...
    C:\>exp test/test@tesdb file=tesdb11072006.dmp
    Export: Release 9.2.0.1.0 - Production on Tue Jul 11 18:20:55 2006
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to: Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.4.0 - Production
    Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    server uses WE8ISO8859P1 character set (possible charset conversion)
    . exporting pre-schema procedural objects and actions
    . exporting foreign function library names for user TEST
    . exporting PUBLIC type synonyms
    . exporting private type synonyms
    . exporting object type definitions for user TEST
    About to export TESTs objects ...
    . exporting database links
    . exporting sequence numbers
    . exporting cluster definitions
    EXP-00056: ORACLE error 19206 encountered
    ORA-19206: Invalid value for query or REF CURSOR parameter
    ORA-06512: at "SYS.DBMS_XMLGEN", line 83
    ORA-06512: at "SYS.DBMS_METADATA", line 345
    ORA-06512: at "SYS.DBMS_METADATA", line 410
    ORA-06512: at "SYS.DBMS_METADATA", line 449
    ORA-06512: at "SYS.DBMS_METADATA", line 1156
    ORA-06512: at "SYS.DBMS_METADATA", line 1141
    ORA-06512: at line 1
    EXP-00000: Export terminated unsuccessfully
    C:\>
    I'm waiting..
    take care
    Regards
    ER

    Seems to be a "known" problem. Check for invalid views. See Metalink Note:206313.1

  • Error while importing a dump file in Oracle 10g R1

    Hi all,
    While trying to import a schema using Data Dump, I am facing the following issue -
    UDI-00018 - Import utility version can not be more recent than the Data Dump server.
    Following is the version information of the source and target DB and the utilities :
    Source DB server : 10.1.0.2.0
    Export utility : 10.1.0.2.0
    Import utility : 10.1.0.2.0
    Target DB server : 10.1.0.2.0
    Export utility : 10.2.0.1.0
    Import utility : 10.2.0.1.0
    I can figure out the cause for the problem, but don't know how to resolve it.
    Any help will be appreciated.
    Thanks in advance.
    Gitika Khurana

    How did you get thre DMP file created and how are you trying to import the dump file? Could you post the commands you're using, please?

Maybe you are looking for

  • Can you have a calculated column in a table not a view?

    We have a table which contains a series of rows Key   Effective Date   Value 1       10/Feb/2006     123 1       23/Oct/2006      456 ...We have a requirement to store an indicator that tells us which row is the most current and what the end date of

  • Reports  distribution in reports 10g

    I am making the distribution file whose content are as follows in tne group filter dest_1: desname=c:\\_.pdf_ destype=file desformat=pdf level=report dest_2: desname=HP LaserJet 4 Plus destype=printer desformat=bitmap copies=1 level=Report But when I

  • User in landscape

    hi expert i want know how to create new user in SAP Landscape.

  • Doubts about java's capability in printing

    I have noticed tonnes of bugs listed regarding printing in java. All I wanted to know is that, if I require printing capability for my application, is it wise to go for Java?? I have noticed lots of bugs in jdk1.2 and 1.3 also seems to have a lot of

  • Af:panelPage facets not working

    I'm using ADF Faces EA11 and I'm having trouble with several of the facets on af:panelPage. None of infoReturn, infoStatus, and infoFootnote render at all. Is this a bug, or a known limitation of the early access release? Is there some trick to makin