Error in E-rec web Service and BSP

Hi Folks
We are facing an issue with Requisition Management in E-rec. A workflow is triggered for requisition management and goes to approver. The workitem does not appear in the UWL of the user however when we monitor the log, it shows the workitem is with approver and without any error.
Our problem is it does not show the workitem in the approver's UWL and when we test the approval serivce and handler service in SICF, it gives us the following message
1.Service Name : wshandler (REQUEST HANDLER FOR WEB SERVICES)
Error in Web service execution
The launch handler was called with an incomplete parameter list
2.Service name : hrrcf_approval (Recruiter: Approval of Status Change)
Error message : Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
BSP Exception: Das Objekt default.htm in der URL /sap/bc/bsp/sap/hrrcf_approval/default.htm?sap-client=100&sap-sessioncmd=open ist nicht gültig.
Please guide us, how to fix.
Regards
Netweaver team

Hi, Were you able to resolve this issue?
IF not then please go to transaction wf_handcust and maintain the entries under Launch Handler, Callback Handler and callback Dialog. I had the same issue and your's was the only related message I could search in SDN so thought of sharing the solution.
Regards,
VInay

Similar Messages

Web Services and BSP

Hi everybody,
I'm not a BSP developer.
Mayby a very easy question, mayby also stupid, but I couldn't find any information about this topic so far. Can I consume Web Services in BSPs ?.
Regards
Peter

You can consume web services in BSP. Find below link to achieve:
Re: Consuming WebService, + SOAP HEADER AUTH:
<i>*Reward each useful answer</i>
Raja T

Error During Activation of Web services

When I try to create a web services using RFC and try to complete the steps in the wizard. I am getting error message as "Error during Activation of web services". and also when configure service in wizard, im getting only two profiles as "Basic Authorization: SOAP PROFILE" and "Secure SOAP PROFILE". Kindly do the needful.
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Aug 8, 2011 1:33 PM

Olivier, thank you so much
SOAMANAGER does not exist in my system (sp level 8), so node "/sap/bc/soap/rfc" should be active. Actually, it is active.
I think the problem is related to user rights/profiles.
I have tried to create another WS after assigning role SAP_BC_WEBSERVICE_ADMIN. The same error when trying to activate it, but now, I can see this WS in SE80 (under "Enterprise Services->Service Definition"). It is not active there and if I try to activate it, a success message appears indicating that user "is not authorized to use function netzwerkadministration". I cannot see any new services in SICF...
Probably the new entry in SICF will be created after activating WS in SE80...
Do u know what user profile should I add in order to properly activate the WS in SE80?
Thank you very much!
Vicente

ASMX web service and The remote server returned an error: (500) Internal Server Error issue

i have developed a very small web service and which is hosted along with our web site. our webservice url is
http://www.bba-reman.com/Search/SearchDataIndex.asmx
web service code
namespace WebSearchIndex
#region SearchDataIndex
/// <summary>
/// SearchDataIndex is web service which will call function exist in another library for part data indexing
/// </summary>
[WebService(Namespace = "http://tempuri.org/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
[System.ComponentModel.ToolboxItem(false)]
// To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line.
// [System.Web.Script.Services.ScriptService]
public class SearchDataIndex : System.Web.Services.WebService
//public AuthHeader ServiceAuth=null;
public class AuthHeader : SoapHeader
public string Username;
public string Password;
#region StartIndex
/// <summary>
/// this function will invoke CreateIndex function of SiteSearch module to reindex the data
/// </summary>
[WebMethod]
public string StartIndex(AuthHeader auth)
string strRetVal = "";
if (auth.Username == "Admin" && auth.Password == "Admin")
strRetVal = SiteSearch.CreateIndex(false);
else
SoapException se = new SoapException("Failed : Invalid credentials",
SoapException.ClientFaultCode,Context.Request.Url.AbsoluteUri,new Exception("Invalid credentials"));
throw se;
return strRetVal;
#endregion
#endregion
when i was calling that web service from my win apps using
HttpWebRequest
class then getting error The remote server returned an error: (500) Internal Server Error
here is code of my win apps from where i am calling web service
string strXml = "";
strXml = "<s:Envelope xmlns:s='http://schemas.xmlsoap.org/soap/envelope/'><s:Body><StartIndex xmlns='http://tempuri.org/' xmlns:i='http://www.w3.org/2001/XMLSchema-instance'><auth><Username>joy</Username><Password>joy</Password></auth></StartIndex></s:Body></s:Envelope>";
string url = "http://www.bba-reman.com/Search/SearchDataIndex.asmx";
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(url);
req.Method = "POST";
req.ContentType = "text/xml";
req.KeepAlive = false;
req.ContentLength = strXml.Length;
StreamWriter streamOut = new StreamWriter(req.GetRequestStream(), System.Text.Encoding.ASCII);
streamOut.Write(strXml);
streamOut.Close();
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
string strResponse = streamIn.ReadToEnd();
streamIn.Close();
i am just not being able to understand when this line execute
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
then getting the error The remote server returned an error: (500) Internal Server Error
not being able to understand where i made the mistake. mistake is in the code of web service end or in calling code?
help me to fix this issue. thanks

Hi Mou,
I just tried your win app code about calling web service, but failed. I got the 500 error after I called your service:
The error message I quoted from Fiddler:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>System.Web.Services.Protocols.SoapException: Failed : Invalid credentials ---> System.Exception: Invalid credentials
--- End of inner exception stack trace ---
at BBAReman.WebSearchIndex.SearchDataIndex.StartIndex(AuthHeader auth)</faultstring><faultactor>http://www.bba-reman.com/Search/SearchDataIndex.asmx</faultactor><detail /></soap:Fault></soap:Body></soap:Envelope>
I am not totally sure that error occurred by the authentication. But I suggest you can try to add this service into your project using this method below:
1.right click the Reference and select Add Service Reference
2.input your service link and click "Go"
And you can use this service as the following:
private async void callService()
ServiceReference1.SearchDataIndexSoapClient client =new ServiceReference1.SearchDataIndexSoapClient();
var Str= await client.StartIndexAsync(new ServiceReference1.AuthHeader { Username = "Admin", Password = "Admin" });
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Errors trying to Invoke web service using BES and SIF

Moved this up from the Integration Forum to see if I can get some visibility on it.
Description : When an invoice get's approved we need to pass on the details of the invoice and approval to the 3rd party customer.
So far I have been able to test the business event which calls the web service that writes the information to a file. However, although the file is created there is no content in the file.
So the steps up to this point
1. Create a simple web service that takes a string as an input parameter and writes this out to a file.
2. Locate the Approve Invoice event [oracle.apps.ap.event.invoice.approval] and add a new subscription that will invoke my web service.
I have a number of issues at the moment.
From the business event page I can test the event which writes a record to the wf_java_deferred queue. I have been able to call the service and create a file however that seems to have stopped working. Where do I look to see what's going wrong? Is the diagnostics the best place to start
If I go into Status Monitoring I can see the last Business Event test I did is now having errors when it tries to invoke the web service. The error I get is
Error Activity ID
Error Activity Label
Error Assigned User
Error Item Type
Error Item Key
Error User Key
Error Message          oracle.apps.fnd.wf.bes.InvokerException: Event payload is not available
Error Name
Error Notification ID
Error Result Code
Error Stack          oracle.apps.fnd.wf.bes.InvokerException: Event payload is not available at oracle.apps.fnd.wf.bes.WebServiceInvokerSubscription.onBusinessEvent(WebServiceInvokerSubscription.java:236) at
oracle.apps.fnd.wf.bes.EventDispatcher.executeSubscription(EventDispatcher.java:870) at oracle.apps.fnd.wf.bes.EventDispatcher.processSubscription(EventDispatcher.java:556) at
oracle.apps.fnd.wf.bes.EventDispatcher.dispatch(EventDispatcher.java:335) at oracle.apps.fnd.wf.bes.AgentListenerProcessorNew.processMessage(AgentListenerProcessorNew.java:373) at
oracle.apps.fnd.cp.gsc.SvcComponentProcessor.process(SvcComponentProcessor.java:659) at oracle.apps.fnd.cp.gsc.Processor.run(Processor.java:283) at java.lang.Thread.run(Thread.java:619)
Error Monitor URL
Timeout Value          0
Event Name          oracle.apps.ap.event.invoice.approval
Event Details          PLSQL:WF_STANDARD.EVENTDETAILS/WFERROR:332124
Event Message          View Event Message
Event Key          3134525_1
Event Data URL     http://hostname.co.nz:8000/OA_HTML/RF.jsp?function_id=18157&resp_id=-1&resp_appl_id=-1&security_group_id=0&lang_code=US&
params=.tut9vCLHp8BRzYkdaLWV3ekOnBGTRSUSr1RYBqw0ISKruqT5nAzoOSzIkWSQrzWO8z23dyX31GlRw75r21ich1KC4hE2KL.ZedjIDcPalm8f.akDClydWkRR3w2eGuk
Event Subscription http://hostname:8000/OA_HTML/RF.jsp?function_id=26058&resp_id=-1&resp_appl_id=-1&security_group_id=0&lang_code=US&
params=fR9VOZbtfJEdYQNb645CRU3kD39os3CZwt7XUpbOYb1RImgFkWaeDFEV0SCaVn1M
Error Type          UNEXPECTED
Error Details          PLSQL:WF_STANDARD.ErrorDetails/WFERROR:332124
Administrator Role          SYSADMIN
Subscription Details          PLSQL:WF_STANDARD.SubscriptionDetails/WFERROR:332124
Error Person ID
Error Person Username
How do I get access to the payload? I only really need 2 or 3 items at this time. Do I need to extend a seeded java function? For example in my initial tests I only want to pass across the Invoice Id so how do I get the value of this attribute out of the wf_event_t (Is this the correct object name) and into the payload that is being passed across to the service call.
Cheers
Owen

Hello Owen
I am experiencing the exact same issue as you are (missing payload) when invoking a web service and was wondering if you have resolved this issue or gotten any new useful information?
Regards,
Magnus

I get an web service error when trying enable web services. I have latest update and rebooted

i get an web service error when trying enable web services. I have latest update and rebooted

hi there philnj,
could you help the community narrow troubleshooting by providing a little more information? Particularly what model printer are we dealing with?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My envy 110 works but the web services and eprint services give "connection error". what to do?

My family use Macs and Apple Deskbook and a BT Homehub network. The HP troubleshooting instructions do not always match what is on computer screen. The menu paths that HP gives sometimes do not exist.
The Envy 110 printer was working fine but it often could not be found by the computers so I followed HP instructions to set a Static IP Address on the Printer. But now the Web Service and ePrint Service give a "connection error". Any suggestions? I am annoyed that HP don't give a phone number to help.

When you set that static IP on the printer, make sure of 2 things:
1. The IP address is outside the DHCP range of the router.
2. Use an external DNS, like Google DNS: 8.8.8.8 and 8.8.4.4
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Pl/Sql web service and collections not working

Hello
I'm trying to create a web service from a function in a package which returns a collection. The creation of the web service and its deployment seem to work correctly. I do get the following warning :
WARNING: OWS-00077 The Value Type class: pxWsLang.PamLanguagerecordBase does not have a valid JAVA Bean pattern
but I don't think this is the source of the problem.
When I try to test the web service using the endpoint in the wsdl I get the following answer in the browser:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>env:Server</faultcode><faultstring>Error creating target: pxWsLang.WsLangUser</faultstring><faultactor></faultactor></env:Fault></env:Body></env:Envelope>
In the DOS window for the OC4J I get the following error :
2006-11-15 09:21:25.852 ERROR OWS-04005 An error occurred for port: {http://pxWs
Lang/WsLang.wsdl}wsLangSoapHttpPort: javax.xml.rpc.JAXRPCException: Error creati
ng target: pxWsLang.WsLangUser.
The PL/SQL code is as follows :
Object:
CREATE OR REPLACE TYPE PAM_LanguageRecord as OBJECT
NR NUMBER(3),
SYMBOL VARCHAR2(2)
Collection:
CREATE OR REPLACE Type PAM_LanguageTable as Table of PAM_LanguageRecord;
Package body :
create or replace package body PAM_TEST is
function CursorTest return Pam_LanguageTable is
Res_LangTable PAM_LanguageTable;
cursor cur is select * from stc_languages;
begin
Res_LangTable := new PAM_LanguageTable();
for Rec in cur loop
Res_LangTable.Extend(1);
Res_LangTable(cur%ROWCOUNT) := new PAM_LanguageRecord
(Rec.NR,
Rec.SYMBOL
end loop;
Return Res_LangTable;
end;
end;
I'm using JDeveloper version 10.1.3.1.0.3984
How can I get this to work ? (without using Apache Axis or other tools :-)
Is it supposed to work ?
Many Thanks
Paul

Hi,
for the "error creating target" problem I found the solution here:
[WS from a PL/SQL package]: Error creating target
Hope this helps.
Regards,
Patrik

Error in calling a web service

hi,
i am facing a problem in calling a web service.
following are the steps i followed.
1. created a client proxy object in transaction se80
2. called that proxy object in my program
3. executed the program
problem
1. an exception 'CX_AI_SYSTEM_FAULT' is caught with error code 'GET_BUSINESS_SYSTEM_ERROR' and error text 'An error occurred when determining the business system (SLD_API_EXCEPTION)'
some facts abt the system:
1. we do not have XI server.
2. i havent created a logical port manually still there exists one entry in table SRT_LP which is as follows-
PROXYCLASS - CO_CAT_PING
LP_NAME - CO_CAT_PING
ACTIVE - A
DEFAULTPORT - X
3. i found error messae in transaction 'sldcheck' as 'Summary: Connection to SLD does not work'
4. i havent created a rfc destination.
please reply ASAP.
thanks in advance,
Sagar

Got a new file for testing the web service and it executed fine. Closing the thread.
Regards
Barada

Error while creating adaptive web service model

Hi All,
There is a requirement where the webdynpro application is deployed in backend system while the web service is created in the front end system. We need to connect to this web service and execute it in our webdynpro application to get response. For this we have created Logical Destination in backend system that points to the web service in the front end system.
The web service, when tested directly through Web Services Navigator, works fine.
Here, while creating an Adaptive Web Service Model in the webdynpro application, after giving name, package, destination name etc when I enter wsdl url and click on Next I am getting an error as u201CError in downloading the WSDL fileu201D.
The error log says u201Ccom.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException:Exception on creation of service metadata for WSDL URLu201D.
Even if I try to create model with url only by selecting u201CNo Logical Destinationsu201D, error remains the same.
What may be the reason for this and possible solution?
Appreciate an early response.
Regards,
Mitali

Hi
Plesae go thriugh the Wiki and the pdf file
https://wiki.sdn.sap.com/wiki/display/WDJava/FAQ-Models-AdaptiveWebService
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7&overridelayout=true
Thanks
Susmita

Error in Calling Oracle Web Service through Eclipse-indigo

Hi All,
I'm getting an below error when trying to call my oracle web service through Eclipse-indigo.
Error:-
IWAB0135E An unexpected error has occurred.
502
Bad Gateway
Steps followed to create oracle web service and invoke WS :-
Followed link
http://docs.oracle.com/cd/B28359_01/appdev.111/b28369/xdb_web_services.htm
which explans how to create oracle web service.
1. Configure HTTP Access
2. Configure the ORAWSV Servlet
3. created user 'test' and wrote simple procedure getdescription which will return name for request id.
4. granted all privilages to user.
5. The orawsv servlet automatically generates a WSDL file.
6. trying to call WS through Eclipse-indigo, but i get error.

Trying to test via PL/SQL first via (see the following url for more info: Re: Using utl_dbws to call web service ) for example something like the following:
SQL> set serveroutput on
SQL> --
SQL> def USERNAME=DBNWS
SQL> --
SQL> DECLARE
2    V_SOAP_REQUEST      XMLTYPE := XMLTYPE(
3 '<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/
encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
4          <SOAP-ENV:Body>
5                  <m:SNUMBER-GET_SQRTInput xmlns:m="http://xmlns.oracle.com/orawsv/&USERNAME/GET_SQRT">
6                          <m:INPUT_VALUE-NUMBER-IN>2</m:INPUT_VALUE-NUMBER-IN>
7                  </m:SNUMBER-GET_SQRTInput>
8          </SOAP-ENV:Body>
9 </SOAP-ENV:Envelope>');
10    V_SOAP_REQUEST_TEXT CLOB := V_SOAP_REQUEST.getClobVal();
11    V_REQUEST           UTL_HTTP.REQ;
12    V_RESPONSE          UTL_HTTP.RESP;
13    V_BUFFER            VARCHAR2(1024);
14 BEGIN
15
16    V_REQUEST := UTL_HTTP.BEGIN_REQUEST(URL => :URL, METHOD => 'POST');
17    UTL_HTTP.SET_HEADER(V_REQUEST, 'User-Agent', 'Mozilla/4.0');
18    V_REQUEST.METHOD := 'POST';
19    UTL_HTTP.SET_HEADER (R => V_REQUEST, NAME => 'Content-Length', VALUE => DBMS_LOB.GETLENGTH(V_SOAP_REQUEST_TEXT));
20    UTL_HTTP.WRITE_TEXT (R => V_REQUEST, DATA => V_SOAP_REQUEST_TEXT);
21
22    V_RESPONSE := UTL_HTTP.GET_RESPONSE(V_REQUEST);
23    LOOP
24      UTL_HTTP.READ_LINE(V_RESPONSE, V_BUFFER, TRUE);
25      DBMS_OUTPUT.PUT_LINE(V_BUFFER);
26    END LOOP;
27    UTL_HTTP.END_RESPONSE(V_RESPONSE);
28 EXCEPTION
29    WHEN UTL_HTTP.END_OF_BODY THEN
30      UTL_HTTP.END_RESPONSE(V_RESPONSE);
31 END;
32 /
old   5:                <m:SNUMBER-GET_SQRTInput xmlns:m="http://xmlns.oracle.com/orawsv/&USERNAME/GET_SQRT">
new   5:                <m:SNUMBER-GET_SQRTInput xmlns:m="http://xmlns.oracle.com/orawsv/DBNWS/GET_SQRT">
<?xml version="1.0" ?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<GET_SQRTOutput xmlns="http://xmlns.oracle.com/orawsv/DBNWS/GET_SQRT">
<RETURN>1.41421356237309504880168872420969807857</RETURN>
</GET_SQRTOutput>
</soap:Body>
</soap:Envelope>
PL/SQL procedure successfully completed.
SQL> set serveroutput on
SQL> --In the example give above the WSDL info should be seen via http://xmlns.oracle.com/orawsv/DBNWS/GET_SQRT?wsdl

Error in calling External web service from soa suite 11.1.1.3

Hi
I am getting following error while calling external web service......
####<Jan 20, 2011 6:54:26 PM IST> <Warning> <oracle.integration.platform> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-490B9BABECE372A277DF> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529866047> <SOA-20136> <WS Binding: exception durign SOAP invocation: java.util.NoSuchElementException>
####<Jan 20, 2011 6:54:26 PM IST> <Warning> <oracle.soa.mediator.common> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-490B9BABECE372A277DF> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529866047> <BEA-000000> < Payload after BaseActionHander.requestMessage :{parameters=oracle.xml.parser.v2.XMLElement@bd2382}>
####<Jan 20, 2011 6:54:26 PM IST> <Warning> <oracle.soa.mediator.common> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-490B9BABECE372A277DF> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529866063> <BEA-000000> < Properties after BaseActionHander.requestMessage :{ReferenceInstance=[email protected]63ea5,
####<Jan 20, 2011 6:54:29 PM IST> <Error> <oracle.webservices.service> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529869375> <OWS-04115> <An error occurred for port: FabricProvider: javax.xml.rpc.soap.SOAPFaultException: oracle.fabric.common.FabricInvocationException.>
I am able to hit external ws from soap ui and getting response but while calling from soa suite getting this error.
Any clues?
Thanks
Vibhor

WS Binding: exception durign SOAP invocation: java.util.NoSuchElementException
Looks like the error is in the data sent to or expected from the service in your composite. Check that audit logs and composite flow to make sure your soap message when using soapui matches what you are working with in soa suite.

Error while completing a web service

Hi,
I have create a RFC, now to use that as a web service I have done the stpes for creating a web service as given in the link
sap technical link tutorial, web service create
when I click on complete button system is giving a messge as Error during activation of web service.
what configuration required for this we have ECC6 system.
regards,
zafar
Edited by: zkarnalkar on Dec 3, 2010 11:13 AM

I guess that would depend on the error you're receiving - what is it? I've never seen a generation error for a service provider when following the few steps required, but you could debug the activation if the message isn't clear. Service consumer errors happen all the time and are generally related to WSDL file compatibility.

"RABAX" occurs on server side error while testing asynchoronous web service

I got error while testing asynchronous web service in WS navigator. I have created asynchronouse web service using RFC. Then I configured it in SOAMANAGER. When I tested it, got error "RABAX occurs on server side". Also I got dump in ST22. It is 'UNCHAUGHT_EXCEPTION - CX_SOAP_SEQ_SCD_ERROR'.
I have tested for synchronous web service it works fine. I found a difference in both web service WSDL file for below parameters value -
commit
blocking
transaction
wsrm
I tried different way .. but no solution .. Plz suggest if someone have any idea.....Its very helpfull....

your problem:
Missing class: oracle.tip.adapter.jms.JmsManagedConnectionFactory
Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
Loader: oracle.bpel.common:10.1.3
Code-Source: /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar
Configuration: <code-source> in /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml
It happens when server is custom installed, try to reinstall it as full version and problem should disappear otherwise your need another full installation to retrieve and replace orabpel.jar file from (or maybe more)

Receiving the internal 500 error while testing java web service

HI,
Problem Summary:
Receiving the internal 500 error while testing java web service in integrated weblogic server.
my scenario is like,
retrieve the Payload from Dehydration tables.
We are connected to SOA_INFRA schema and we are retrieving the payload from the dehyadration tables based on InstanceId and ECID using Java Classes.After that i make it as a web service and i deployed in to intergrated weblogic Server.It is generating the Target End Point URI.When am i hitting this it is showing structure of the service.I am testing this service from soapUi it is returning the Server internal error with 500.Here i am passing inputs as InstanceId and ECID.
I had verified in my Jdeveloper,Proxy settings are available.
Error Payload:
I am receiving the Internal 500 error because of JDeveloper HTTP Analyzer encountered an error retrieving: CONNECT https://192.168.0.41:9102 HTTP/1.0.
An exception occurred while retrieving the response for https://192.168.0.41:9102.
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.checkEOF(SSLSocketImpl.java:1293)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:65)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:50)
     at oracle.jdevimpl.webservices.tcpmonitor.model.HttpMessageBase.readLine(HttpMessageBase.java:658)
     at oracle.jdevimpl.webservices.tcpmonitor.model.HttpRequest.read(HttpRequest.java:327)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.getResponse(ConnectionHandler.java:405)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:331)
Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.net.ssl.internal.ssl.InputRecord.handleUnknownRecord(InputRecord.java:523)
     at com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:355)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:798)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.getSession(SSLSocketImpl.java:1916)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateSSL(ConnectionHandler.java:707)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateForwardedSSLConnection(ConnectionHandler.java:672)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:311

An exception occurred while retrieving the response for https://192.168.0.41:9102.
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?This error says that port 9102 is a plain HTTP port so either use the correct port (which is listening for HTTPS connections) or use HTTP instead of HTTPS in the URL.
Regards,
Anuj

Error in E-rec web Service and BSP

Similar Messages

Maybe you are looking for