Error in executing WAD web template

Hi All,
I am executing the query/WAD template.
I can run the query/template but it does not give me data at the output.
I need to execute WAD template which are not giving data at the output.
Currently the template is getting executed but it is showing NO APPLICABLE DATA FOUND
along with it It gives error saying no active transfer structure exists in source system but this is 7.0 data source & I have transformations created for it.
I have tried creating a test query on my multi provider, which gets executed using RSRT but through portal it gives me error as,
system error in program CL_RSR_RRK0_ATTR_C and from CHECKALVL-01
Please provide some pointers to solve the issue.
Thanks & Regards,
Rashmi.

Hi Rashmi,
You try implementing the processes in these SAP Notes for your error while executing the query on multiprovider.
1023404
1003609
1132221
the links for these sap notes are:
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1023404
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1003609
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1132221
With Regards,
Ravi Kanth.

Similar Messages

Error while executing a web template in browser

Hi experts,
I am facing an issue when I am creating copy of an existing web template and executing it.
As per the query inserted in the web template, it should show the 'variable entry' screen, but its showing a page with lots of junk characters (looks like chinese to me).
When I execute the already existing template, its showing the correct screen.
Can anyone help me in fixing this issue?
Regards,
Uday.

You are not alone - Looks like SAP is also looking into this.
Web Application Designer Appearing in Unicode (UTF-8)

Error BRAIN 276 when you execute a Web template in BI Admin Cockpit in EP

Hi Experts,
I have Installed BI Administration Business Packages in Portal and configured necessary steps in BI System.I have assigned the role in Portal and BI System.
I tried executing one iview...and was getting the following error:
Error loading template 0TPLI_0TCT_MCA1_Q0143
and when i click on the above error ..i was getting another window which shows below message:
Technical Information for Message:
Error loading template 0TPLI_0TCT_MCA1_Q0143
Notification Number BRAIN 276
I was suggested by SAP Note 1014795 to do the below changes :
TEMPLATE_ID=0TPLI_0TCT_MCA1_Q0143 To TEMPLATE=0TPLI_0TCT_MCA1_Q0143
Please note that the above note says to replace TEMPLATE_ID by TEMPLATE in the property of "BEX Web application Query String" of the IView in Portal
and also please note that i have Version=SAP BW 2.X/3.X in Iview Property .
After having made the above changes iam getting the BEX Web Analyzer...where i have the options to open a query ( from all the infoareas of BI System).and then i will select the query (0TCT_MCA1_Q0143) and am executing the same to display the data.
i know that this Is not the correct way of executing the iview for BI Admin Cockpit.
Can anyone help me how to execute the Web Template automatically when the user clicks on IView ?
we have all the above Web Templates Corresponding to BI admin cockpit in active mode in when checked from WAD 3.X , but when when i search for the above web templates in WAD 7.0 i do not find them
Is there anything that i need to activate in BI System ? Or in Portal System?
Or do i have to execute the above web templates in BI WAD before linking them to portal iviews?
Do we have to Migrate the Web Templates from BW 3.5 to BI 7.O?
Thanks
P.Navakanth
-When i try to execute the web templates

We are having this exact same issue - example of one of the errors:: Error loading template 0TPLI_0TCT_MCA1_Q0114. We get this error for all MCA1 templates. Basis says they've deployed latest BP BI Administration 1.0 with Patch 2 (BPBIADMINOSP_2-1000342B.SCA).The info refers to BI Admin Cockpit, Business Package for BI Administration,
BP BI ADMINISTRATION 1.0 ,BI Usage Statistics,0TCT_CA1.
I see from documentationthat the multicube 0TCT_MCA1 is from 0TCT_CA1 and 0TCT_VCA1
From the documentation in http://help.sap.com/saphelp_nw70/helpdata/en/26/9ef41d14dc424183b4807538be8e1e/frameset.htm, under web templates,
1) How come there are more than 1 template with same name and Query with same names- for example:
Web Template: Long-Term Trends in Total Runtimes of BI Applications
WebTemplate: 0TPLI_0TCT_MC01_Q0114
This Web template is the container for the query 0TCT_MC01_Q0114 and is designed to provide detailed analyses.
AND
Web Template: Long-Term Trends in Total Runtimes of BI Applications
WebTemplate: 0TPLI_0TCT_MCA1_Q0114
This Web template is the container for the query 0TCT_MCA1_Q0114 and is used for detailed analyses
2) How come the delivered process chains load other technical content, but does not load 0TCT_CA1
Basis re-deployed the bi admin cockpit contents, but still have error in loading template 0TPLI_0TCT_MCA1_Q0114.
3) Do we need to do any of the following?
SE38 u2013 run RSTCC_ACTIVATEADMINCOCKPIT_NEW
RSA1 - bi content, install & transport
Check role SAP_BI_BW_ADMINSTRATOR
Se38 u2013 rs_template_maintain for active templates u2013 look for MCA1 templated
Tr code RSDDSTAT
Activate Virtual providers
Anything else?
Thanks!

I am getting a error while executing the Web Dynpro Application Page.

Hi All,
I am getting a Error while executing a web dynpro application :::
: Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component: Z_WEP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
I have checked this error description in ST22 :
What happened?
    The exception 'CX_WDR_RT_EXCEPTION' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_WDR_CLIENT_APPLICATION=====CP' has to be
    terminated.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WDR_RT_EXCEPTION', was not caught
     and
    therefore caused a runtime error.
    The reason for the exception is:
    Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component:
    Z_XXP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
Can u plz help me regarding this error.
Thanks,
Deepika

>Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered
Looks to me like you are trying to fire a navigation plug within WDDOMODIFYVIEW. According to the rules of the WD Phase Model this is not allowed.

The changes made in the WAD web template is not replicating on web browser

Hi,
We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
The changes made in the WAD web template is not replicating on web browser result.
I went to transaction SMICM, then choose "Goto" from the top menu. From there, go to HTTP Server Cache, then choose Invalidate, then choose Global in system. With this thing also it didnt slove.
thanks

Clear your browser cache also and see if the changes are visible.....
Arun

Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")

I activated all 0* objects in BTMP and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
Error messages :
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
ERROR: Command type SWITCH_AXES of object not recognized
ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
Error messages :
Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.
Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.
Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)
Query does not exist in the BI System (Object QU )
Cannot instantiate data provider
I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
What could be the problem?

hi,
Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
wht is the SP Level?
Nagesh Ganisetti.

About the top N condition in WAD web template

Hi all experts,
I'm facing a problem in my WAD web template. Hope you guys can give me a hand.
In my web template, there is analysis item A and B.
Table A are used to display top 3 customers(char) with highest purchase rate % (KF), I'm using top N condition to select top 3 customers.
And table B is to show all customers with purchase rate, sorted from highest purchase rate to lowest (logic:- sort the KF(purchase rate) in descending order)
The problem is when there is many customers with purchase rate = 100%(more than 20 customers), then for the 1st-3rd customers of table A and B, the selected and sorted customers results are not the same, shouldn't that they should be identical for the 1st three rows as they are trying to show customers with highest purchase rate? even though table A is using top 3 condition and table B is using descending sorting for purchase rate.
For example:- Top 3 customers in table A and all customers in table B
Table A
Customer       Purchase rate
c3                  100%
c1                  100%
c5                  100%
Table B
Customer    Purchase rate
c2              100%
c3              100%
c4              100%
c1              100%
c5              100%
c6              81%
c7              58%
In this example, table a and b have selected different customers for 1st to 3rd position, i'm trying to make them showing identically. Any suggestion?
Perhaps you guys can give me some idea on how does the top N condition determine the TOP 3 customers if there is many customers with 100% purchase rate as in this case.
Thanks a lot,
Eric
Edited by: Eric Tan on Aug 12, 2008 10:49 AM

When u create conditions, you have tab called CHARACTERISTIC ASSIGNEMENT.& other is GENERAL..which is like in what way you want to create conditions i.e based on which characteristic or whole characteristic in rows etc...you try choosing those option in that tab, so that you can find some ideas..

Changes made in the WAD web template is not replicating on web browser

Hi,
We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
The changes made in the WAD web template is not replicating on web browser result.
Thanks in adv
pinky

Just to add.
WAD templates are stored as HTML in the HTTP cache.
Whenever you make changes to the template - it is good practice to delete / invalidate the HTTP Server cache.
This can be done from
SMICM --> Goto (menu bar ) --> HTTP Server cache --> Invalidate --> GLobal
ust to make this thread complete..
However this is usually done for 3.x web templates since they run off the ABAp stack - not too sure about the JAVA stack - guess portal cache has to be cleared too..

TR with WAD web templates

Dear All,
       I need to collect WAD web templates in a TR.
       Please suggest me the best way to collect them.
       I was trying with transport connection option in RSA1. But it looks like not all the web items are getting collected.
       Thanks in advance.
Regards,
Anwar

Hi Anwar,
Before collecting the objects into a transport, we should follow the sequence, if you will miss the sequence then you are unable to collect the objects into transport request.
Please let me know are you following the sequence while collecting the objects into transport request. if you will not follow the sequence,first collect the objects in a sequnece.
Step1--> Once you have that, transport your base level objects - Infoobjects, DSO & Cube structures.
Step2--> Then you can transport the Update rules, transfer rules, transformations for the above..
Step3--> And finally, the infopackages and DTPs.
By using RSA1--> choose -->Transport connnection option in modeling tab. And Drag the objects which you want to collect into transport.
Please let me know, stilly ou are facing any issues.
Thanks,
Premalatha.C

Error while executing WAD template and publishing it to Portal

I get an error message when i try to execute WAD template and publish in portal
//start of error message
Error while loading query metadata
check the query and portal settings
RSBOL 018 Java system error:Exception in method process Function.
//end of error messagge
But when i click "ok" then the template gets executed and published in portal
I want to know why is this error message getting displayed.
BW is at SP14 level (template is created in BI 7.0)
EP is at SP13 level.
Is there any compatibility issue between BW and EP.If so, please let me know.
Please solve this issue.
Thnaks and Regards,
Pradeep

Hi,
take a look:
Note 916090 - RFC-error messages in Web Application Designer 2004s
Hope this helps...
Regards
Andreas

URL error while executing a web report in WAD

Hi,
When I execute a web report through the Web Application Designer, I get the following error:
The requested URL could not be retrieved
While trying to retrieve the URL: http://abcd.efghi.es:8000/sap/bw/BEx?
The following error was encountered:
Unable to determine IP address from host name for abcd.efghi.es
The dnsserver returned:
Name Error: The domain name does not exist.
This means that:
The cache was not able to resolve the hostname presented in the URL.
Check if the address is correct.
But when I execute the web report with the IP of the machine http://123.456.7.893:8000/sap/bw/BEx?...........
I can execute my web report correctly.
I didn't find any options in the menu web template in order to modify the url generation.
Please help me to solve this problem.
Regards,
Rocio

You are not alone - Looks like SAP is also looking into this.
Web Application Designer Appearing in Unicode (UTF-8)

Error While executing WAD Template

Hi BW Experts,
I am working on BI7.0
I am getting following error, when I am trying to execute
WAD Template through portal.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Access denied (Object(s): portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex).
Exception id: 07:01_31/07/07_0035_37431450
See the details for the exception ID in the log file
Anybody explain me about this error.
Thanks in advance.
Maruthi

Hi maruthi,
It seems that you dont have the access to the portal, try to login using another userid(or u can use admin's) and PW, also see this portal address included in default IP Addresses.(Tools->Internetoptions->Connections-> Lansettings->advanced.
Regards,
Naren.

Error when changing default web-template

Hello experts,
I´m facing the following problem and I don´t know what to do:
I´ve created a new web template in WAD 7.0 and set it as deafult web template for ad-hoc analysis in transaction SPRO.
When I want to execute a query in web e.g. from the Query Designer 7.0 I get an error loading web template (brain 276 / "template not found in master system").
I´ve already checked note 1014795, but it doesn´t help, because I don´t want to start the template with RSRT or iView in Portal. I want to use my template as default template for BEx 7.0.
Any idea??
Thanks a lot in advance.

issue solves: just entered the wrong technical name in spro... :/

How to build Information button in WAD, web template

Hello friends,
I am working in BI 7.0 WAD
well i designed a query in Bex and it is linked with portal , so if i run the query it shows the result in Portal
On portal while executing the query if i filter on some characteristics, then there is a button on Upper left named INFORMATION--- so if i click that it will give me the details, what extra filters i did , what extra restrictions i did.
I am now using the same query in WAD, in order to design a web template.
So please suggest how to create that Information tab in Web template.
I think i have to create a Button, than name it as Information,
But then selecting a Command, what Selection do i have to make
Which command selection i have to do and what settings I have to make.
Please suggest appropriate step by step approach as i am new and learning.
Also if you can tell how to use a specific Query in WAD to design a Web template.
Thanks
W

I am new ,so if you can shed light by giving steps i will appreciate it.
In SPRO, i can see SAP REFERENCE IMG, IMG INFORMATION, PROJECT ANALYSIS, MANAGE WORKLIST ....
How shall i go to reporting section.
All reports are linked to portal so they execute equally on Portal with same setting.
So how shall i copy that web template/
If i copy the web template , how shall i remove everything else.
How shall i use that web template in My WAD.
How to save that Web template.
Do i have to do everything in Bi server, as i can use SPRO tcode only there.
If i create new template in WAD, how can i drag and drop the function as of default template.
How shall i set the property
Please suggest

IE error of query and web template

Hello experts,
We had completed the configuration of " Integration into Portal"
successfully.
Query and web template can execute successfully via "Execute" button.
After click "Execute" button, query or web template display the result
in IE.
And we can use right-click menu to do all of operation at beginning.
But after we click the right menu a few times, it will occure error.
The error information as follow:
Line : 8914
Char : 2
Error: 'initMenus[...].windowHeight' is null or not an object
Code : 0
URL : http://jt-
pldev.gnpjv.cgnpc.com.cn:50000/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher
Is there any solution? Thank you.
Best Regards,
Chen Jianguo

same here.
Internet Explorer 7, web templates or web analyzer:
1. open context menu with right mouse key
2. click on a free area outside the menu, to close the menu
3. opening the menu do not work anymore. buttons do not work anymore either.
searched notes, sdn, ... patched all to the newest level...
still the same error.

Error in executing WAD web template

Similar Messages

Maybe you are looking for