Error in external tax system: Line: 0##### - Unknown tax calculation (MIRO)
Hi Friends,
We have an issue while doing the MIRO
Scenario : - Company code in USD Currency, we have a purchase order in EUR currency which had GR and IR in EUR only last year..this year when we are trying to process IR ( MIRO) for residual amount in EUR currency got the error
"Error in external tax system: Line: 0##### - Unknown tax calculation"
Even when we are trying to post foreign currency invoice from F-43 got the same issue...
Taxware guys said no issues from their side
Is there any year end impact this error ?
Thanks for you help
TKP
Hi Ravi,
I have verified this one also.no issue there
Issue :- When Trying to post Invoices in Foreign currency with Tax I0/A0 ( Exempt tax codes) there we are getting that error
"Error in external tax system: Line: 0 - Unknown tax calculation error
This is process was worked till last year Dec 2011 but not working on FY 2012... the same scenario working in Dev client but not in PRD and Test systems..
The same tax codes can work for local currency postings but not foreign currency ..other tax codes are working for the both currencies in all systems...
Let me share your idea's
Thanks
TKP
Similar Messages
-
Error in external tax system: Line: 0 - 0440 TxJCdSTIO The fleximap module
Hi,
We have a third-party purchase order where in PO is created in our US company code but the delivery is to a plant belonging to a BRazil company code. (Delivery address is in Brazil).
Problem is when the user is trying to change the tax code on the invoice tab for a line item he gets the below error.
Error in external tax system: Line: 0 - 0440 TxJCdSTIO The fleximap module
Message no. FS861
We are using VErtex for our US/Canada taxes.
Can anyone let me know why we are getting the error.
Raj.Hi
As far as US company code is concerned, the moment the PO is initiated, the integration links would trigger after subsequent process the SO, Billing, Delivery in Brazilian company code.
The tax codes in both the company codes need to be similar. The system allows to change the tax code but does not process the transaction because of lack of similarity.
I am sure the inteface links are fine, but recheck the settings in Brazilian cc
Interesting issue, please do let me know how you would resolve
reg
suresh -
Error in external tax system: Line: 1 - Security key may be invalid o
Hi all,
Whenever I am creatting order getting error message Error in external tax system: Line: 1 - Security key may be invalid o
expired dNo. This is only required if you want Billing to prorate tax changes. Check your jurisdiction code structure. usually this error is caused by inconsistent jurisdiction code.
-
COMMUNICATION ERROR WITH EXTERNAL TAXATION SYSTEM - VERTEX_MS0018
When I copied US company code 3000 to my org using USD as currency code with a a view to simulate US scenarios it threw an error as under.
The error occurred when I was trying to fill in the address tab after copying the company code.
<b>
COMMUNICATION ERROR WITH EXTERNAL TAXATION SYSTEM - VERTEX_MS0018</b>.
Thank you and regards,
RamHi Ram Shiva,
Deactivate External tax
Path:SPRO>Financial Accounting>Financial Accounting Global Settings>Tax on Sales/Purchases>Basic Settings>External Tax Calculation>Activate External Tax Calculation
Hope this will solve
Best Regards
Ashish Jain -
Hi Guys
I am getting an error when the BAPI is being called by webmethods. The order gets generated but when i go in to it to verify stuff and on running the incompleteness check i get pricing error. On checking the pricing the tax was found not be be getting updated by the system therfore i manually entered and hit enter but got error in taskbar 'Error in external tax system: Line: 0 - 0440 TxJCdST The Fleximodule fo'
I then did a lookup for tax calculation in FI and found the table KOMK with field-TXJCD that updates the jurisdiction code for price calculation.
SPRO>Financial Accounting > Financial Accounting global setting > Tax on sales purchase >Basic setting > Check calculation procedure
The question is when we are calling the BAPI locally we are successfully created without error but calling the BAPI from webmethods its giving error.
Could any one suggest anything???Hello Comes Naturally,
There are 2 SAP Notes which talk abt the error 594847 and 500281 and both talk abt implementing the advance corrections given in them.
I give you the details of the notes for your reference below
<b><u>594847</u></b>
Summary
Symptom
You enter a customer invoice with Transaction FB70 (this is also valid for a vendor invoice with Transaction FB60). You enter a G/L account item and derive a profitability segment (by choosing the profitability segment button on table control). The system generates error message FS861:
'Error in external tax system: : & - 0440 TxJCdST...'
Other terms
CALCULATE_TAX_DOCUMENT, COPA_PROFITABILITY_SEGMENT, EnjoySAP, SAPMF05A
Reason and Prerequisites
This problem is caused by a program error.
Solution
Import the appropriate Support Package or implement the attached advance corrections.
<u><b>500281</b></u>
Symptom
In an FI Enjoy transaction to post invoices, you enter data including a tax amount in the basic data screen, you enter a revenue line item and you choose the 'Profitability segment' pushbutton. As a result, the transaction terminates with message
FS861 'Error in external tax system: 0 - 0440 TxJCdST The fleximap module to'.
The problem also occurs, for example, if you select a screen variant or an account assignment template.
Other terms
FS861, COPA, screen variant
Reason and Prerequisites
If you use Vertex as an external tax system, a program error occurs in this manner.
Solution
Implement the attached program corrections.
Thanks
Murtuza
Thanks
Murtuza -
Hi,
When User is posting in fb60/miro he is getting following error
Eternal tax system:Line 0-0440 TXJCDSTIO the fleximap module
Please i will assign points
Thanks
ChiruThis is because there is an RFC connection maintained for the tax system.. and this is maintained in SM59 and this system is unable to be communicated.. These are maintained by Basis team.... Check with them.. What is wrong..
-
Error in external tax system: SAX processing failed on input stream SAX pro
Hi
When I was posted in T.Code: FB70, (Customer Invoice) I am getting below mentioned error.
Error in external tax system: SAX processing failed on input stream SAX processi.
I put tick mark on calculate Tax column and select O1(A/R Sales Taxable).
Pls. help me.
Thanks
RanjithHi Ranjith,
I also face this problem in Production now.
Could you kindly share with me how you resolved this issue?
Thanks,
Markus -
Error from External Tax system in CRM Quotation
Hi,
We have a Quotation in CRM, as soon as we click on 'Edit' button in WebUI, We get error "External Tax System: An error occurred while calculating tax. This may be an incorrect use of the calculation engine. Please contact your software vendor. Error trying to calculate tax on transaction."
Ship-to Party is from Bermuda and the Sales Org in Quotation is having country USA. We checked with the team working on VERTEX server (Tax system for USA) as per them the error log getting generated in VERTEX is because country key for Ship-to is not getting passed to VERTEX and the error is sent back to CRM.
While investigating we found that the error is coming into CRM (lt_messages) via
FM call CALL FUNCTION 'SPC_GET_PROTOCOL' DESTINATION gv_vmc which is a call to IPC (path: Function Module: PRC_PD_ITEM_SHOW > PRC_INT_ITEM_SHOW > PERFORM get_pricing_document_info > perform get_protocol > CALL FUNCTION 'SPC_GET_PROTOCOL' DESTINATION gv_vmc)
We are unable to trace how the error is coming from this FM. Can anyone help us to find out.
Regards,
SameerHi Christophe,
Thank you for your reply.
We have Quotations in which Tax is working properly. RFC settings are maintained properly.
In fact we have a case where Sales Org in Quotation is having country US and Ship-to Party having country Thailand which hasn't given any error and ERP Order is also created from it and now we have another Quote with similar scenario which is also not having the tax error, but to proceed with Order creation when we click on Edit, we get that Tax error I mentioned above.
I'm not sure if any changes at IPC is causing this bacause when I tried to Edit both the Quotes, the same FM SPC_GET_PROTOCOL receives error in one case but not in other. Behavior of CRM_COND_COM_BADI impl. is also similar in both the cases.
Regards,
Sameer -
Message no. FS861 Error in external tax system
ENJOYSAP error in external tax system blocks system. I found an OSS note 788088, but its for SAP 5.0 or older. Does anyone know of a note that will fix it for SAP 6.0 ecc.
https://service.sap.com/sap/support/notes/1101570
-
Error in external tax system: Specify a tax jurisdiction key
Hi Experts,
US Customer is not allowed to create Shopping Cart (SC) due to the below error
Error in external tax system:
Specify a tax jurisdiction key.
Kindly share your views about this error. Tax code displayed in the held SC of that user is AP .Hi Gomathi,
Please take a look at the notes below:
656474 IMG activity documentation for Taxes
633784 US taxes not calculated
436760 TAX. Specify a tax jurisdiction key
419026 TAX. TXJCD determination in backend system
392696 R/3 Tax Interface Configuration Guide
Best regards,
Christian Zeucbh -
Getting Communication error with the external tax system(VERTEX_MS0018)
Hi All,
I am a new SAP HCM self learner. I am practicing it on company's sandbox system. When I am trying to create a company and saving the address, it is returning Communication error with the external tax system(VERTEX_MS0018). I have already tried to solve is issue by going thru previous related to same issue like
Communication error with the external tax system (VERTEX_MS0018) ...Urgent
but coudn't solve the issue.
Please help. Is this issue coming as I am using a training environment? any alternate approach?Hi Ravi,
To disable the connection to Vertex:
Goto tcode SPRO > Cross Application Components > Transaction Tax Engine >
Technical Settings> Define External Tax System
Here an RFC would be defined. Remove it and try again.
Also in SPRO > Cross Application Components > Tax Determination based on Jurisdiction Codes > External Tax Jurisdiction > Activate External Tax Jurisdiction.
Remove the entry 'V' here.
Regards,
Srikishan -
Communication error with the external tax system(vertex_ms0018)
Hi All
I have installed ECC6 IDES S/W on my PC. I have activated SAP Insurance module (FS-CD). When I try to create business partner using FPP1 with US address, It is throwing error as follows:
"communication error with the external tax system(vertex_ms0018)"
I dont want to use any external Tax system like Vertex etc. because I am not calculating any taxes.
I gave correct US address with valid ZIP etc. but no use.
Please help me if any one of you has idea. How to overcome this error. How to deactivate connection to external tax system.
Your help will be greatly appreciated.
Thanks
GiriHi Giri,
I've notice that you took the 'V' from the configuration but you left the RFC destination.
Clearly the RFC destination is not working thus the reason you get the error (in your case, your server can't determine a valid IP address for the host iwdf8334.wdf.sap.corp).
To sort out the problem you got I can think of at least two ways:
1. Get the RFC connection working (get the correct setup for it) using transaction SM59
2. Or if you don't really need the external tax calculations, remove the RFC configuration from TAXUJ under Assign RFC Destination to Country on the Cross-Application SPRO entry.
3. You can always add TAXUS to transaction OBBG if you require it (as it comes out of the box).
This should fix the problem you are having but I'm assuming you don't need the external tax calculations.
If you do, just fix the connection using SM59 (you may want to ask for help from your Basis team if you don't know how to do it).
Cheers
Jorge Laranjo
[email protected]
+44 741 847 5946 -
Tax error when updating renewal contract lines
Hi,
We're doing the contract renewals custom way, and apply a price increase and some other minor modifications to contract lines. Now, I have some more modifications to the program based on new user requirements. So, after calling the renewal API, I need to check the actual term for ext. warranty on the order line and change the term of the contract, AND set the price to same as the contract that got renewed. When I do this, my update to the renewal lines does not go through and errors out with the following:
1.The system cannot find tax information for tax regime US-SALES-TAX-101 and tax &TAX. Please contact your tax manager. (TAX_CODE=DISTRICT)
I would really appreciate if someone could provide some insight into this, as I'm just stuck with this and cannot move forward.
Thanks!
AlkaHi Alka,
logically I would check
==> Log in with service contracts manager responsibility and query the renewal contract that is created
-- Check if the tax code information is populated. If yes then check if the tax code has been end dated in system.
-- go to Setup --> Transactions --> Transaction Types. Query Invoice-OKS and Credit-OKS and check if Tax Calculation check box is selected
-- go to Setup --> Transactions --> Sources and query your batch transaction source and check how Autoinvoice is setup to handle imported transactions that have invalid tax rates.
You can read up details of this in the implementation guide "Setting up service pricing and billing" chapter, page 61 to 68.
==> There was a bug logged for this error (metalink article id: ID 786000.1), and it is relevant to 12.0 / 12.1 apps version. You may want to check if the related patch solves your problem.
Hope this helps!
Thanks,
Sid. -
Hi All,
I'm getting the below errer in CRM sales order.
"IPC:External Tax System: NO_ZONE_TREE_MATCH No Matching Zone Tree was found. Address: SHIP_FROM"
Please give me some clue what could be the reason for the error..
Thanks in advance,
JM.The "NO_ZONE_TREE_MATCH" is an error message returned by the external tax engine (Sabrix) when the address information does not allow it to "match up" to a country, province/state, city, county or zip code. When this happens in an address validation, you will get this message. When this happens in a calculation transaction, no tax will be returned by the engine.
Hope this helps.
Dani -
Communication error with external system ( VERTEX )
Hi Folks,
While creation the Credit memo request or Sales order /invoice system giving the error message " COmmunication error with external system ( VERTEX ) " and stopping to proceed further and even not able to post the accounting document.
Please help me out here.
Answers will be appreciated and rewared.
Regards,
Ram.Hi,
check this below thread
Communication error with the external tax system (VERTEX_MS0018)
OR
Remove V from the Extrernal System at the location IMG->financial Accounting->Financial Accounting Global Settings->Tax on Sales/Purchases->Basic Settings->External Tax Calculation->Activate External Tax Calculation
Reg,
JJ
Edited by: Jagsap on Mar 5, 2010 1:15 PM
Maybe you are looking for
-
CrystalReportViewer Failed to Open the connection Unable to retrieve Object
I am getting the following Error on trying to view a report in the CMC and the Infoview. CrystalReportViewer Failed to Open the connection. ReportName Unable to retrieve Object. Failed to open the connection. ReportName I have recently re-installed C
-
2.1 Out and Best way to Update if you are a mobile me subscriber's
From My experience put your phone in to DFU mode and reset your phone back to new. Remember this works for me and I recommend it if you use MOBILE ME. Download the new Firmware and then follow the below http://www.ifonenation.com/2008/07/24/how-to-pu
-
Use speakers and headphones at the same time
Hi! Is it possible to use both exits to play different songs? I mean, use speakers and headphones like different channels, I'd like to use them to mix music and it would be very useful if I could listen a song by headphones while the other one is pla
-
HT1688 i changed my passcode and forgot the code, what can i do?
does anyone know who to contact dierectly?
-
Error when trying to get the MBR of a georaster
Dear all I have some georaster maps which have been uploaded and spatial indexed. However when I run the following command in 10.2.0.2 to get the minimum x MBR ordinate I get the below error message: select sdo_geom.sdo_min_mbr_ordinate(WEB_RASTER_MA