Error in File content Conversion

HI All,
I am gettng
"Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this"
What this error means?

The problem...
Field   Max Length
X         3
Y         4
ideal structure of file.. should be
XXX YYYY
or
(ii) XX YYYY
But in my situation it is coming like...
(ii) XXYYYY if the X field is of two value instead of 3 .
so if use my logic adapter will pickup XXY in one field and YYY as second...
If field lenght is smaller the maximum then file should have spaces to file upto max lenth ..
but this is not the case with my situation..
i guess we cannot read such kind of file where we are not sure of the file structure..

Similar Messages

Error regarding File content conversion

Hello all,
I am getting the below mentioned error,
com.sap.aii.af.ra.ms.api.MessagingException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value '')', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value '')', probably configuration error in file adapter (XML parser error)'
My scenario is rfc -> file.In receiving adaptor it is giving me this error. I am not able to understand whats going wrong with it.I have checked the parameters specified for file content conversion i think they are fine.
Please can anyone help me to get out of this..
ZZSP.addHeaderLine      0
ZZSP.fieldFixedLengths     6,8,2,6,8,2,148
ZZSP.fixedLengthTooShortHandling     Cut
ZZSP.endSeparator     'nl'
ZZRP.addHeaderLine      0
ZZRP.fieldFixedLengths     3,1,2,4,2,6,1,2,2,7,9,2,7,8,5,5,6,12,8,4,6,6,3,2,67
ZZRP.fixedLengthTooShortHandling     Cut
ZZRP.endSeparator     'nl'
ZZTOT.addHeaderLine     0
ZZTOT.fieldFixedLengths     3,1,2,2,2,10,35,2,2,10,35,12,12,12,12,12,12,1,14
ZZTOT.fixedLengthTooShortHandling     Cut
ZZTOT.endSeparator     'nl'
ZZSUB.addHeaderLine      0
ZZSUB.fieldFixedLengths     3,1,2,10,3,2,2,3,3,6,3,25,25,6,1,12,12,12,12,12,25
ZZSUB.fixedLengthTooShortHandling     Cut
ZZSUB.endSeparator     'nl'
ZZLIN.addHeaderLine      0
ZZLIN.fieldFixedLengths     3,1,2,5,2,12,23,2,8,3,6,2,9,3,5,3,3,4,4,1,9,12,12,10,10,12,3,10,1
ZZLIN.fixedLengthTooShortHandling     Cut
Edited by: Siddhesh Pathak on Nov 3, 2008 2:19 PM
Edited by: Siddhesh Pathak on Nov 3, 2008 2:19 PM
Edited by: Siddhesh Pathak on Nov 3, 2008 2:20 PM

ur FCC is not configured correctly, I can not see fieldNames in the FCC.
wat is the strucutre of ur file?
r u having any key field in ur file?
refer sample example:
Content Conversion (Pattern/Random content in input file)
How to send a flat file with various field lengths and variable substructures to XI 3.0
chirag
Edited by: Chirag Gohil on Nov 3, 2008 7:34 PM

Adapter error in file content conversion

Hi Friends,
I am using FILE receiver adapter, transport protocol- NFS, msg protocol-File content conversion.
Sending msg is an idoc. File is being sent to application server of the XI system (for test purpose)
The message is shown as successful in SXMB_MONI but no file is created .
In message monitoring for adapter engine an error is shown -
"file adapter receiver channel <comm channel name> is not initialized. Unable to proceed MP: eception caught with cause com.sap.aii.af.ra.ms.api.Recoverable Exception. Channle has not been correctly initialized & cannot process messages "
However if i change the message protocol to FILE then it works correclt & a xml file is saved in system.
It seems the problem is with using file content conversion in the adapter farmework.
Can someone please help.

Hi
I have configured in a similar manner
Below is the XML Message
<?xml version="1.0" encoding="UTF-8"?>
<ns0:FileMatFlat_MT xmlns:ns0="http://ztest.com/test/idoc2file">
<RecordSet>
<Row>
<Author>SivaSakthi</Author>
<Transfered_By>SIVASAKTHI</Transfered_By>
<Long_Mat_Num>0000056090</Long_Mat_Num>
<Material_Number>0000056</Material_Number>
<Material_Desc>TESTING132123KLOSDFJ</Material_Desc>
</Row>
</RecordSet>
</ns0:FileMatFlat_MT>
My FCC parameter;
RecordStructure : Row
Row.addHeaderLine 1
Row.fieldSeparator #
Row.endSeparator 'nl'
My Output looks like
Row
SivaSakthi
Can some one please tell me why the others are not coming.

Error sender file content conversion

HI all,
when an error occurs during the conversion of the file content in sender adapter the others files put in dicrectory is not processed.
I know that exists one parameter in Sender File Adapter that is possible to specify the directory to archive the file with error, but in what SP it is possible?
I have the XI SP15 and this feature is not present.
How I do to instruct the XI to process the nexts files?
thanks.

From the Support Package Stack 10 of XI 70
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/f565854b7341e6e10000000a1553f6/frameset.htm
From the Support Package Stack 19 of XI 30
http://help.sap.com/saphelp_nw04/helpdata/en/44/f565854b7341e6e10000000a1553f6/frameset.htm
Good reason to upgrade.
Hope this help,
Regards
Sandro

Error in File content conversion in the target

hi
I'm doing a content conversion at target.
my target structure while sending is like:
<MT>
 <Header>
 <a>
</Header>
 <BODY>
 
</BODY>
 <filename_output>
 <filename>
</MT>
however in the target i have to ignore the last 2 fields: <filename_output> and <filename>.
I'm able to do it.
The problem is coming that in the target structure,when we open in Textpad, 2 trailing empty lines are there at the end.
we need to remove these lines.
Any idea how to do it?

Hi Alok,
Try with parameters given in this blog:
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
If didnot work try: FileName.endSeperator = '0' as given in this thread: Re: Blank Lines While writing files
else give .endSeparator as two backspaces (if you have two new lines). The ascii code is '0xBS'. see this code:
http://www.december.com/html/spec/ascii.html
---Satish

Error in Receiver File adapter using File content Conversion

Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
Aparna

Hi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit

Error in reciever file content conversion

Hi
I have the following error in the file content conversion
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)'
my content conversion is :
Recordset Structure : FI_Banks_Header_MT,Line
FI_Banks_Header_MT.fieldSeparator = 'nl'
FI_Banks_Header_MT.fieldSeparator = ;
my xml is :
<FI_Banks_Lines_MT>
****<Line>
<FIELD1>12799</FIELD1>
<FIELD2>721042</FIELD2>
<FIELD3>0620</FIELD3>
<FIELD4>20.06.06</FIELD4>
<FIELD5>5575688</FIELD5>
****</LINE>
</FI_Banks_Lines_MT>
The file gets ok !!! but I still get this error in adapter monitor after the file is converted all the time
any1 managed to solve it ? thx , Shai

Hey sorry for the previous one...
try out this...
Recordset Structure : FI_Banks_Lines_MT
FI_Banks_Lines_MT.endSeparator = 'nl'
FI_Banks_Lines_MT.fieldSeparator = ;
hope this helps !!!...
Cheers.,
Esha

File Content Conversion Error in PI 7.1 (file to Proxy)

Hi
I am working on File to Proxy Scenario and I gave the File content conversion as below, File is picking up by the PI Server when I look at Communication Channel Monitoring, However when I open the Message ID in the CC monitoring it says as
404 Not Found
The requested resource does not exist.
and I do not see any message SXMB_MONI(Because the content is not converted), Can anyone give an idea how to debug this
Thanks
PR
Please find the details below which I gave in the content Conversion
Document Name : MT_TW_AK
Document NameSpace : http://aiwcd.com/Claims_Management(CM)_Rel2.0
RecordSet Name : FROISROIAcknowledgement
RecordSet Structure : Header,1,Record,*,Trailer,1
Recordset Sequence : Ascending
KeyField Name :TransactionSetID
Key Field Type : String (Case Sensitive)
IgnoreRecordsetName : true
Header.fieldNames :TransactionSetID,SenderID,ReceiverID,DateTransmissionsent,TimeTransmissionsent,OriginalTransmissionDate,OriginalTransmissionTime,TestProductionCode,InterchangeVersionID
Header.fieldFixedLengths: 3,25,25,8,6,8,6,1,5
Header.keyFieldValue : H
Record.fieldSeparator :
Record.fieldNames : TransactionSetID,RecordSequenceNumber,DateProcessed,TimeProcessed,InsurerFEIN,ClaimAdministratorPostalCode,ClaimAdministratorFein,AcknowledgementTransactionSetID,ApplicationAcknowledgmentCode,InsuredReportNumber,ClaimAdministratorClaimNumber,JuridictionClaimNumber,MaintenanceTypeCode,MaintenanceTypeCodeDate,RequestCode,FreeFormText,NumberofErrors,MaintenanceTypeCorrectionCode,MaintenanceTypeCorrectionCodeDate,JurisdictionBranchOfficeCode,ClaimAdministratorAlternatePostalCode,NumOfErrors
Record.fieldFixedLengths: 3,9,8,6,9,9,9,3,2,25,25,25,2,8,3,60,2,2,8,2,9,19
Record.keyFieldValue : A
Trailer.fieldNames:TransactionSetID,DetailRecordCount,TransactionCount
Trailer.fieldFixedLengths: 3,9,9
Trailer.keyFieldValue : T
ignoreRecordsetName: true

PR,
Can you check the error in sender communication channel?
Go to RWB ---> Component Monitoring ---> Adapter Engine ---> Communication cahnnel monitoring --> it displays new page. Then give your file sender communication cahnnel name. There you will definitely see some error.
The error what you are getting is a different to this one. Can you please check the error what I have given above path.
Regards,
---Satish

Error in configuring File Sender Adapter with File Content Conversion

Hi
i am designing a File to File scenario using file content conversion in which the input is comma separated file and output is a XML document.
mentioned below are the configuration information:
Recordset Name: Substr
Substr.fieldSeparator: ,
Substr.endSeparator: 'nl'
Substr.fieldNames: Name, Password
Substr.keyFieldValue: Name
and the error i can see in adapter framework is:
Sender Adapter v0830 for Party '', Service 'FileContentConversion':
Configured at 14:30:45 2005-04-07
Initialization error: Conversion initialization failed with java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Mandatory parameter 'Substr.fieldNames': no value found
plz help me ASAP.
thanks and regards,
Varun Joshi

Hi Varun...
Regarding ur error.....the name and password u send in csv is not getting recognised.. so u have to check the data type structure.
there must be a recordset name and subelement must be recordset structure..the data type must be
<datatypename>
 <recordsetname>
 <recordsetructurename>
 <name>
 <password>
please try in this format and ur name and password will get recognised

Error in Sender File content Conversion - how to ignore keyfieldName

Dear Frndz,
I'm new to SAP PI. I want to post a flat file to ECC.
The Souce Structure is:
Record(1-unbounded)
    |_Header(1.1)
          field1
          field2
          field3
    |_Detail(1.unbounded0
        field4
        field5
        field6
Sample File:
first header - xx,yy,zz
Detail 1 -      1,b,c
Detail 2 -     2,e,f
second header - aa,bb,cc
Detail 1 -     1,g,d
I wrote the file content conversion as follows
   Recordset name - Record
   Recordset Structure - Header,1,Detail,*
Header.fieldNames field1,field2,field3
Header.feldseparator ,
Header.endseparator 'nl'
Detail.fieldNames field4,field5,field6
Detail.fieldseparator ,
Detail.endseparator 'nl'
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found
It's asking me to give the input to keyfieldname. But I dont have such field in my record. Ther's no common field . no field is repeating like record type or doc_type as in other cases.
So, Coud you please guide me to proceed with this.
Thanks in advance.....

Hi,
Please, take a look to these Blogs related to FCC
Troubleshooting the File Adapter (Last Updated on 02 July'10)
Content Conversion (Pattern/Random content in input file)
File Content Conversion for Unequal Number of Columns
The specified item was not found.
Content Conversion ( The Key Field Problem )
NAB the TAB (File Adapter)
Rgds
RP-.

File Content Conversion Error

Hello,
I have Async. File receiver scenario in which the following is the XML message structure. This is received by the file adpater.
<ns1:MT_Info_File xmlns:ns1="urn:http://freemanco.com/xi/info_list">
 <TYPE>
 <FileItem>
 <FileName>DD11022007</FileName>
 </FileItem>
</TYPE>
<DATA>
 <LineItem> <LineEntry>234567891234567890123456789012345678901234567890</LineEntry>
 </LineItem>
 <LineItem>
<LineEntry>95473523647586969587265245437586979798376524253586</LineEntry>
 </LineItem>
<DATA>
<LineItem</ns1:MT_Info_File>
I want to write only folowiing DATA structure to file. I do not want to wite contents of TYPE structure
<DATA>
 <LineItem> <LineEntry>234567891234567890123456789012345678901234567890</LineEntry>
 </LineItem>
 <LineItem>
<LineEntry>95473523647586969587265245437586979798376524253586</LineEntry>
 </LineItem>
<DATA>
In the receiver file adpater I have follwoing File content conversion parameters.
RecordSetStructure: DATA,LineItem,*
*.addHeaderLine 0
*.fieldFixedLengths 301
*.fixedLengthTooShortHandling Error
*.endSeparator nl
LineItem.fieldSeparator nl
DATA.fieldSeparator nl
While testing I got following error. Looks like it is expecting some values for FileItem element in the XML.
Error Attempt to process file failed with java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'FileItem' found in document', probably configuration error in file adapter (XML parser error)'
Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'FileItem' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'FileItem' found in document', probably configuration error in file adapter (XML parser error)'
Error Exception caught by adapter framework: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'FileItem' found in document', probably configuration error in file adapter (XML parser error)'
Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'FileItem' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'FileItem' found in document', probably configuration error in file adapter (XML parser error)'.
How to resolve this issue? I appreciate your help.
Thank you,
Balaji

Balaji,
I would suggest to remove FileItem and LineItem in your receiver datatype. They are increasing the hierarchy of your content conversion. If you do that then you will have
<ns1:MT_Info_File xmlns:ns1="urn:http://freemanco.com/xi/info_list">
<TYPE>
<FileName>DD11022007</FileName>
</TYPE>
<DATA><LineEntry>234567891234567890123456789012345678901234567890</LineEntry>
<LineEntry>95473523647586969587265245437586979798376524253586</LineEntry>
<DATA>
</ns1:MT_Info_File>
Then in content converstion give this parameters:
Record structure : TYPE,FileName,DATA,LineEntry
TYPE.fieldfixedlengths : 0
FileName.fieldfixedlenghts:0
DATA.fieldfixedlenghts:0
LineEntry.fieldfixedlengths:301
LineEntry.endSeparator:'nl'
Then it should work. Also you can use FileName in your variable substituition. Also please see this weblog on how to use FileName in variable substitution:
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
If you dont want to remove FileItem and LineItem then add these also in your content conversion. Then the parameters would be:
Recordset: TYPE,FileItem,FileName,DATA,LineItem,LineEntry
TYPE.fieldfixedlengths : 0
FileItem.fieldfixedlengths:0
FileName.fieldfixedlenghts:0
DATA.fieldfixedlenghts:0
LineItem.fieldfixedlengths : 0
LineEntry.fieldfixedlengths:301
LineEntry.endSeparator:'nl'
Regards,
---Satish

** File Content Conversion Error in Receiver CC - How to solve this?

Hi friends,
My target structure looks like below.
EmployeeJobDetails --> Message Type
 JobCode --> Node
 EmployeeNumber xsd:string
 Domain xsd:string
 JobTrack --> Node
 Department xsd: string
 Position xsd: string
I use the FCC parameters in the receiver CC as below:
Recordset Structure: JobCode,JobTrack
JobCode.fieldSeparator = |
JobCode.endSeparator = 'nl'
JobTrack.fieldSeparator = |
JobTrack.endSepartor = 'nl'.
Because, we want the output like below
1099|Raja
Accts|JuniorAccountant
1100|Ram
HR|Recruiter
like this.
In this scenario Source is XML and target is txt file.
I am using XSLT Mapping. The FCC works fine, if my source input file contains some records. But, when we send empty source XML file as below
<?xml version="1.0" encoding="UTF-8"?>
<EMPLOYEE_DATA/>
Mapping works fine. Message is processed successfully in SXMB_MONI. The payload in response also comes with Message Type name like below
<EmployeeJobDetails namespace >
</EmployeeJobDetails>
While convert this, the system throws below error.
Error Message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)'
Friend, how to convert this when source XML is empty.
But, if we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the same empty XML file FCC is working fine and we get the target text file 0 KB. (Amazing !!)
But, in the first case, how to solve the issue?
Kind Regards,
Jegathees P.

Hi friends,
If we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the same empty XML file FCC is working fine and we get the target text file 0 KB. (Amazing !!)
But, if we give parameters like JobCode,JobTrack then send pass the same empty file, we face the problem 'File Content Conversion' Error.
Searching solution for this problem ...

File Content Conversion - Error in keyfield Value

Hello experts,
I am doing file content conversion for a file to file scenario. The input file is a csv file which is converted to xml using the file content conversion. The key field of input file is used for implementing conversion.
While testing the FCC, I noticed that if the keyfield value is wrong for a record in the file, the record is ignored altogether without throwing any errors or warnings. Is there any way to notify if any records have been ignored as a result of incorrect keyfield value??
Thanks in advance!
RR

There seems to be NO way to handle it in FCC.
File Content Conversion - Key Field Value
u can think of work arounds by handling it in mapping....
-santosh.

Error whil doing File Content Conversion

Hi all,
I had configured a sender for File Content Conversion and I am getting the follwoing error.
Sender Adapter v1014 for Party '', Service 'bs_xml_sender':
Configured at 05:39:05 2007-04-27
Initialization error: Conversion initialization failed with java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Format error in 'xml.recordset' argument: incomplete structure (name,number) pair.
Any ideas why I am getting this error.

Here is the detailed error message.
"Messages:16:40:41 Start of test
- Cannot produce target element /ns:mt_receiver/PO_NUM. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
16:45:01 End of test
16:45:10 Start of test
- Creating Java mapping com/sap/xi/tf/_mm_Sender_Receiver_
- Loaded class com.sap.xi.tf._mm_Sender_Receiver_
- Call method execute of the application Java mapping com.sap.xi.tf._mm_Sender_Receiver_
- *** START APPLICATION TRACE ***
- Document start
- Start tag [ns:mt_receiver]
- Add raw attribute [ xmlns:ns="http://xml2xml"]
- Cannot produce target element /ns:mt_receiver/PO_NUM. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
16:45:12 End of test

Multiline file content conversion-- error

Hi All
I am sending a txt file to CSV format (txt file), I have done IR and ID without errors. Adaptor Monitor shows that
Initialization error: Conversion initialization failed with java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
I have given '.fieldFixedLengths' or '.fieldSeparator' in the Content conversion parameters in the receiver dommunication channel.
Could you please let me know what could be wrong?
Thanks,
Ram

Thanks Krishnamoorthy, Bhavesh, Priyanka for your reply
The Problem is the file is picked up from the source but not reaches the destination
Sender Communication Channel Details:
Source File format----test.txt (Notepad)
Source Datatype:
FILEINPUT
Record
 Row
 FirstName
 LastName
 MiddleName
 City
 Place
 State
 Country
Content conversion paramerters:
Row.fieldNames---FirstName,LastName,MiddleName,City,Place,State,Country
Row.fieldSeparator---,
Row.endSeparator---'nl'
Transport Protocol---NFS
Message Protocol---File Content Conversion
Receiver Communication Channel Details:
Target File format----Test.txt
Target Datatype:
FOUTPUT_TEST
Record
 Row
 FirstName
 LastName
 MiddleName
 City
 Place
 State
 Country
Content conversion paramerters:
Row.addHeaderLine-----0(zero)
Row.fieldSeparator------,(comma)
Record.fieldSeparator-----'nl'
Row.endSeparator-----'nl'
Transport Protocol---NFS
Message Protocol---File Content Conversion
I am sending a text file and I want to receive it as a text file.
In both, Sender communication channel and Receiver communication channel I am using file content conversion.
Thanks
Ram

Error in File content Conversion

Similar Messages

Maybe you are looking for