Error in configuring File Sender Adapter with File Content Conversion

Hi
i am designing a File to File scenario using file content conversion in which the input is comma separated file and output is a XML document.
mentioned below are the configuration information:
Recordset Name: Substr
Substr.fieldSeparator: ,
Substr.endSeparator: 'nl'
Substr.fieldNames: Name, Password
Substr.keyFieldValue: Name
and the error i can see in adapter framework is:
Sender Adapter v0830 for Party '', Service 'FileContentConversion':
Configured at 14:30:45 2005-04-07
Initialization error: Conversion initialization failed with java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Mandatory parameter 'Substr.fieldNames': no value found
plz help me ASAP.
thanks and regards,
Varun Joshi

Hi Varun...
Regarding ur error.....the name and password u send in csv is not getting recognised.. so u have to check the data type structure.
there must be a recordset name and subelement must be recordset structure..the data type must be
<datatypename>
 <recordsetname>
 <recordsetructurename>
 <name>
 <password>
please try in this format and ur name and password will get recognised

Similar Messages

Error in reciever file content conversion

Hi
I have the following error in the file content conversion
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)'
my content conversion is :
Recordset Structure : FI_Banks_Header_MT,Line
FI_Banks_Header_MT.fieldSeparator = 'nl'
FI_Banks_Header_MT.fieldSeparator = ;
my xml is :
<FI_Banks_Lines_MT>
****<Line>
<FIELD1>12799</FIELD1>
<FIELD2>721042</FIELD2>
<FIELD3>0620</FIELD3>
<FIELD4>20.06.06</FIELD4>
<FIELD5>5575688</FIELD5>
****</LINE>
</FI_Banks_Lines_MT>
The file gets ok !!! but I still get this error in adapter monitor after the file is converted all the time
any1 managed to solve it ? thx , Shai

Hey sorry for the previous one...
try out this...
Recordset Structure : FI_Banks_Lines_MT
FI_Banks_Lines_MT.endSeparator = 'nl'
FI_Banks_Lines_MT.fieldSeparator = ;
hope this helps !!!...
Cheers.,
Esha

Error whil doing File Content Conversion

Hi all,
I had configured a sender for File Content Conversion and I am getting the follwoing error.
Sender Adapter v1014 for Party '', Service 'bs_xml_sender':
Configured at 05:39:05 2007-04-27
Initialization error: Conversion initialization failed with java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Format error in 'xml.recordset' argument: incomplete structure (name,number) pair.
Any ideas why I am getting this error.

Here is the detailed error message.
"Messages:16:40:41 Start of test
- Cannot produce target element /ns:mt_receiver/PO_NUM. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
16:45:01 End of test
16:45:10 Start of test
- Creating Java mapping com/sap/xi/tf/_mm_Sender_Receiver_
- Loaded class com.sap.xi.tf._mm_Sender_Receiver_
- Call method execute of the application Java mapping com.sap.xi.tf._mm_Sender_Receiver_
- *** START APPLICATION TRACE ***
- Document start
- Start tag [ns:mt_receiver]
- Add raw attribute [ xmlns:ns="http://xml2xml"]
- Cannot produce target element /ns:mt_receiver/PO_NUM. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
16:45:12 End of test

Error handling in File content conversion

In our project , we are converting Flat file to XML by adapter modules ...
File is like this :
HEADER 123 567
DETAIL UWERU AASD fftk
DETAIL UWERU AASD fftk
DETAIL UWERU AASD fftk
DETAIL UWERU AASD fftk
FOOTER
File has been succesfully converted to XML.HEADER, DETAIL and FOOTER are the key field
values.
Now in some scenario file is like this
HEADER 123 567
DETAIL1 UWERU AASD fftk
DETAIL UWERU AASD fftk
DETAIL UWERU AASD fftk
DETAIL UWERU AASD fftk
FOOTER
As there is one DETAIL1( different from DETAIL, it can be anything other tha DETAIL ) we need to throw the error.Client wants to do it in the Integration engine level not in Adpater engine...
Any suggestions will be great ....

Bhavesh ,
Input
HEADER 123 567
DETAIL UWERU AASD fftk
DETAIL UWERU AASD fftk
DETAIL UWERU AASD fftk
DETAIL UWERU AASD fftk
FOOTER
The output is like this
<root>
<header>
 <f1>123</f1>
 <f2>567</f2>
 <detail>
 <f3>UWERU</f3>
 <f4>AASD</f4>
 <f5>fftk</f5>
 </detail>
 <footer>
 </footer>
Now regarding the module , we are using all standard modules , can we set the flag using SAP standard module ???
Another question is , is ot possible to make the key field values (HEADER, DETAIL and FOOTER ) is part of the output ???
Regards
Goutam

Error in Converting File Content in a Sender Adapter

Hi everyone.
We are using File content conversion as message protocol for a simple flat file (sender) .
In the sender communication channel we have configured the recordset structure as follows:
order_row.filedNames : orderid,item,quantity,price
order_row.filedSeparator : ,
order_row.endSeparator : 'nl'
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'order_row.fieldFixedLengths' or 'order_row.fieldSeparator' is missing Mandatory parameter 'order_row.fieldNames': no value found 
In monitoring no XML messages are seen in IDX5.
What is the solution for this kind of problem.

you have to provide values for the recordset structure?
Below i am refering multiple blogs on Content conversion, please refer them to help you get a hand on the same.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter - TAB delimited
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter

Cant do a file get from external server using file sender adapter with ftp

Hi all,
Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process
I have a requirement to do an ftp file get from an external server
From our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues and communications are fine
Unfortunately I cannot currently pull files from the external server using the XI file adapter with ftp protocol from the XI development server AWB017
FTP Connection Parameters: External server name using port 21, Data Connection is Passive, No security, I supply a userid and password
Processing Parameters: Processing Mode is Archive (I tried test but this did not work either)
No messages appear in the RWB
Is there something else that I need to set up in order for the external ftp get to work via the XI file adapter?
Regards,
Mike

Thanks for your responses.
I have found the error messages in the File Adapter Monitor
Scenario 1
When I prefix the source directory with a forward slash, eg /Folder/Subfolder the error message is as follows
EST: Error: Error connecting to ftp server 'ip address': FTPEx: /Folder/Subfolder: The system cannot find the path specified
Scenario 2
When I DO NOT prefix the source directory with a forward slash, eg Folder/Subfolder a different error message is returned
Error: Retrieving file 'FILENAME.XML' failed unexpectedly: FTPEx: Folder/Subfolder: The system cannot find the path specified
At least in this scenario the adapter has been able to identify the file on the external FTP site but cannot retrieve it
Questions
I thought that the backslash prefix for the source directory was mandatory but I am receiving an error in each scenario
I receive the same error message whether the Processing Mode is 'Archive' or 'Test'
The logs on the external ftp server seem to indicate that I am simply connecting, sending username and password then quiting straight away. I am not issuing any commands that they can see
I thought that being a Sender adapter it would inherently execute a Pull or Get command
To recap, from our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues, communications, userid and password are fine
Has anyone experienced these issues?
Please advise on next course of action?
Regards,
Mike

File Sender adapter with File content conversion

Hi
I'm having problems picking up a flat file that has some junk characters in the file.
I'm usign a file sender adapter with file content conversion. The adapters shows the following error-
Conversion of complete file content of to XML format failed around position 0: sun.io.MalformedInputException
this is the sample data with junk char's -
A20099201009999009999060815160505051700130008151vÿÿÿÿ³ r 0OK0476 31N016227241915840IV 00840 ÿÿÿ ÿ ÿÿÿÿÿÿÿÿ ÿ ÿÿÿ
There is not much in the file content conversion. This is a fixed length file, I'm just pickign it up & passing it to an inbound proxy. All my processing is in the proxy.
I'd appreciate any suggestions.
Thanks
Rachana

Hi Rachana,
Do you use a specific "encoding" like UTF-8 or ISO-8859-1 in your Sender CC?
To be simple, Encoding is linked to country, you can find all "iso-nnnn" via google or some of them in sap help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Moreover, with your source file opened thanks to Notepad (for instance), use option "save UNDER", you will the encoding use by your file
Mickael

File Sender Adapter with FTP protocol

Hi,
I implementet a file sender adapter with FTP protocol. There is a problem: the sender processes the files even if they're in use by another application.
I.E. If another application put files (via ftp) in the sender work directory (that is on ftp), the sender processes those files before their transfer is completed.
I don't want that this sender in a communication channel in PI 7.1, imports files in the system when they aren't completed yet.
There are some ways to block sender before it processes incompleted files (in an ftp)?
Thanks
Matteo

Hi,
File sender adapter provides a check for NFS mode
+Check this
To specify additional parameters in the adapter configuration, set the Advanced Modeindicator.
● Msecs to Wait Before Modification Check
Enter the number of milliseconds that the adapter must wait before it checks whether the files have been changed.
This parameter is not available if you have selected File Content Conversion as the Message Protocoland then made an entry under Recordsets per Message that splits an input file into several messages.
This parameter is applicable only for the File adapter. If you enter a value in this field when configuring the sender FTP adapter, it will have no effect.+
Other approach can be to apply OS level checks
Regards
Suraj

Problem with Sender Adapter File Content Conversion

Hi all!
I have a question about file content conversion in sender file adapter.
I have file like:
{field1
field2
field3
field4
$
{field5
field6
field7
field8
And i need to get file like:
<dealings>
<deal>
<field1>{field1</field1>
<field2>field2</field2>
<field3>field3</field3>
<field4>field4</field4>
<field5>-}*</field5>
</deal>
<deal>
<field1>{field5</field1>
<field2>field6</field2>
<field3>field7</field3>
<field4>field8</field4>
<field5>-}*</field5>
</deal>
</dealings>
I put content conversion parameters:
deal.fieldSeparator = $
deal.fieldNames = field1,field2,field3,field4,field5
And i get a file like:
<ns:mt_swift_file>
<dealings>
<deal>
<field1>{field1</field1>
</deal>
<deal>
<field1>field2</field1>
</deal>
<deal>
<field1>field3</field1>
</deal>
<deal>
<field1>field4</field1>
</deal>
<deal>
<field1>-}*</field1>
</deal>
<deal>
<field1/>
</deal>
<deal>
<field1>{field5</field1>
</deal>
<deal>
<field1>field6</field1>
</deal>
<deal>
<field1>field7</field1>
</deal>
<deal>
<field1>field8</field1>
</deal>
<deal>
<field1>-}*</field1>
</deal>
</dealings>
</ns:mt_swift_file>
What i do wrong?
As i understand, XI put string to a separate tag after symbol 'nl', but how can i get structure without unnecessary tags?

Hi,
Check some links for FCC
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani

Doubt regarding Sender adapter file content conversion to RFC

Hi Experts,
Below is the my Source and Target XML structure ( i have creaated source structure same as target RFC structure), This scenario is working fine when i give XML file as input. File -> XI -> RFC , xml file is able to update the information in R3.
How should i configure sender file adapter for file content conversion for above structure(in this case input is fixed lenth text), and i could able to change source structure according to our req, without changing target RFC strucuture.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_HSA_IDNumber xmlns:ns0="urn:passhe.com/UpdateIdNumberISA32">
 <COMMIT_I>X</COMMIT_I>
 <IDENTIFICATION>
 <STUDENT>6500001191</STUDENT>
 <ID_TYPE>FS0030</ID_TYPE>
 <ID_NUMBER>testxml</ID_NUMBER>
 <VALID_FROM>20070421</VALID_FROM>
 <VALID_TO>20091231</VALID_TO>
 </IDENTIFICATION>
</ns0:MT_HSA_IDNumber>
I have configured sender file adapter with FCC like :
Document name as: MT_HSA_IDNumber
Document name space as: urn:passhe.com/UpdateIdNumberISA32
Record structure as: COMMIT_I,1,IDENTIFICATION,1
COMMIT_I.fieldNames : COMMIT_I
COMMIT_I.fieldFixedlengths: 1
IDENTIFICATION.fieldNames: STUDENT,ID_TYPE,ID_NUMBER,VALID_FROM,VALID_TO
IDENTIFICATION.fieldFixedlengths: 12,6,60,8,8
i am getting error like this: even when i change source structure like below metioned:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_HSA_IDNumber xmlns:ns0="urn:passhe.com/UpdateIdNumberISA32">
 <COMMIT>
 <COMMIT_I>X</COMMIT_I>
 </COMMIT>
 <IDENTIFICATION>
 <STUDENT>6500001191</STUDENT>
 <ID_TYPE>FS0030</ID_TYPE>
 <ID_NUMBER>idnumber1</ID_NUMBER>
 <VALID_FROM>20070421</VALID_FROM>
 <VALID_TO>20091231</VALID_TO>
 </IDENTIFICATION>
</ns0:MT_HSA_IDNumber>
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'COMMIT_I.fieldFixedLengths' or 'COMMIT_I.fieldSeparator' is missing Consistency check: no. of arguments in 'COMMIT_I.fieldFixedLength' does not match 'COMMIT_I.fieldNames' (0 <> 1)
Please help me out
thanks
dhanush

Hi Dhanush,
Try giving the Sender FCC this way for the source structure you have mentioned above.
Record structure as: COMMIT,1,IDENTIFICATION,1
COMMIT.fieldNames : COMMIT_I
COMMIT.fieldFixedlengths: 1
Hope this helps.
Thanks and Regards,
Induja

Adapter error in file content conversion

Hi Friends,
I am using FILE receiver adapter, transport protocol- NFS, msg protocol-File content conversion.
Sending msg is an idoc. File is being sent to application server of the XI system (for test purpose)
The message is shown as successful in SXMB_MONI but no file is created .
In message monitoring for adapter engine an error is shown -
"file adapter receiver channel <comm channel name> is not initialized. Unable to proceed MP: eception caught with cause com.sap.aii.af.ra.ms.api.Recoverable Exception. Channle has not been correctly initialized & cannot process messages "
However if i change the message protocol to FILE then it works correclt & a xml file is saved in system.
It seems the problem is with using file content conversion in the adapter farmework.
Can someone please help.

Hi
I have configured in a similar manner
Below is the XML Message
<?xml version="1.0" encoding="UTF-8"?>
<ns0:FileMatFlat_MT xmlns:ns0="http://ztest.com/test/idoc2file">
<RecordSet>
<Row>
<Author>SivaSakthi</Author>
<Transfered_By>SIVASAKTHI</Transfered_By>
<Long_Mat_Num>0000056090</Long_Mat_Num>
<Material_Number>0000056</Material_Number>
<Material_Desc>TESTING132123KLOSDFJ</Material_Desc>
</Row>
</RecordSet>
</ns0:FileMatFlat_MT>
My FCC parameter;
RecordStructure : Row
Row.addHeaderLine 1
Row.fieldSeparator #
Row.endSeparator 'nl'
My Output looks like
Row
SivaSakthi
Can some one please tell me why the others are not coming.

Error in Receiver File adapter using File content Conversion

Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
Aparna

Hi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit

Sender File Adapter - File Content Conversion

Hello,
i do have a problem with the file content conversion at the sender file adapter.
I have configured the file content conversion with key field defined
keyfield: key
recordsetstructure is set as head,1,item,*
head.fieldSeparator |
head.beginSeparator |
head.endSeparator |
head.keyFieldValue H
head.fieldNames key,....
item.fieldSeparator |
item.beginSeparator |
item.endSeparator |
item.keyFieldValue I
item.fieldNames key,....
When i run it like this it will not read since it has a problem to identify the key fields.
When ever i change the whole logic to be not based on fieldseparator but on fixed length, everything is working perfectly fine.
but this unfortuantly doesn't help as i have no fixed structure for the rest of the fields.
also when i change the recordsetstructure to head,1,item,1 my file is also processed correctly, of corse only for the first line, it at least tells me that the file structure is correctly defined.
Can anyone help why the identification for the keyfields doesn't work with field names and separator but in the same set up with fixed lengths ?
thanks a lot

Hello All,
thanks for the helpful answers.
So i tried Jayan tip and removed the begin Separter.
Unfortuantly my file is really looking like this |H|...|...| for the header record
and for the item record |I|...|...| ( this was an" I" like in Item ...
In my opinion this means i really do have a begin seperator which is the same like the field separator.
When i removed it from both the file and the config it started to work.
So i wrote an java function which will trow away the first digit in this case and integrated it in my szenario.
So that when this file is read there is no | as a begin flag anymore.
And the whole thing starts to work, this sounds more like a bug then a feature but anyway i am happy.
so thanks a lot
Tina

Sender Adapter File Content Conversion - question

Hi!
Could you help me to make xml-file from csv?
I have file like:
12345#254#9765#89654
55#9066#77127#47
And i need file like:
<dealings>
 <deal>
 <field1>12345</field1>
 <field2>254</field2>
 <field3>9765</field3>
 <field4>89654</field4>
 </deal>
 <deal>
 <field1>55</field1>
 <field2>9066</field2>
 <field3>77127</field3>
 <field4>47</field4>
 </deal>
</dealings>
I haven't key fields - all fields are accidental. And lengths of all fields are accidental.
How to put content conversion parameters?
Thank you.

HI
File Content prameters for the Sender Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
File content conversion sites
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
The specified item was not found. - FCC
The specified item was not found. - FCC
File Content Conversion for Unequal Number of Columns
File Content Conversion for Unequal Number of Columns - FCC
Content Conversion (Pattern/Random content in input file)
Content Conversion (Pattern/Random content in input file) - FCC
XI Configuration for MDM Integration - Sample Scenario - FCC - MDM
XI in the role of a FTP
XI in the role of a FTP
File content conversion sites
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
The specified item was not found. - FCC
The specified item was not found. - FCC
cheers

Sender Adapter File Content Conversion

Hi everyone,
Can someone help me out here?
For some reasons, out of the fields declared, only 20 gets filled!
Scenario, I've configured the file sender adapter with file content conversion. It's picking up an fixed length ASCII file.
Here are the Content Converion Parameters:
Document Name: MT_Site
Recordset Name: Rootnode
Recordset Structure: Site,*
Recordset Sequence: Ascending
Site.fieldNames= Site_Number,Participant_Number,OPIS_Terminal,ntework_list,tax_code1,tax_code2,tax_code3,tax_code4,CFN_Product,CFN_Product_1,CFN_Product_2,CFN_Product_3,CFN_Product_4,CFN_Product_5,CFN_Product_6,CFN_Product_7,CFN_Product_8,CFN_Product_9,Name,Address,City,Province_state,Region,Filler
Site.fieldFixedLengths= 6,4,4,6,2,2,2,2,2,2,2,2,2,2,2,2,2,2,30,26,26,2,1,1
Site.processFieldName= fromConfiguration
Site.lastFieldsOptional= YES
Site.endSeparator= 'nl'
So only the first 20 fields gets filled!
Thanks for your help on this!

check if the number of characters in the file matches the total in the content conversion for one record line.
if ur message type has three fields a1,b1,c1 of length 10,10,5 respectivvely and the same is maintained in CC, if u have the file data as 123456789abcdef the data for a1 will be 123456789a and for B1 it will be bcdef and no data for C.....hence this check
Message was edited by:
Prabhu S

Error in configuring File Sender Adapter with File Content Conversion

Similar Messages

Maybe you are looking for