Error in GR for Order (MB31),
Hii all,,,
I am getting Error while receiving goods against Production Order in MB31
I have a Production Order for 1000 Quantity and extra 100 Qty was Produced.
While receiving the Excess quantity i am getting the Error in MB31.
I havent given any Tolerances in Customizing in Inventory.
Error Message is M7022
Please Provide me the Solution and suggest me if any SPRO settings are missing
Thanx & Regards,
Kumar Rayudu
Hiii Sachendra,,
I have not given any Tolerances in the Production Order.
In the Attributes of the Messages i have given the Warning Message.
But it should allow the Goods Receipt.
But still it is Giving an Error.
Message: OR Order quantity exceeded by 100 KG
Thanx & Regards,
Kumar Rayudu
Similar Messages
-
RUNTIME Error - User Status for Order release
HI Friends,
Pls go thru the run-time error description,which i'm getting on Order release.Pls reply,.
Runtime Errors MESSAGE_TYPE_X
Date and Time 31.03.2008 13:16:08
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Unable to read RFC destination WORKFLOW_LOCAL_250
Long text of error message:
Technical information about the message:
Message class....... "SWF_RUN"
Number.............. 617
Variable 1.......... "WORKFLOW_LOCAL_250"
Variable 2.......... "RFC_READ_DESTINATION_TYPE"
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"CL_SWF_RUN_WIM_LOCAL==========CP" or "CL_SWF_RUN_WIM_LOCAL==========CM088"
"IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "SILDEV"
Network address...... "192.168.255.70"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x IA64 Level 3"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "SILDEV"
Database type..... "MSSQL"
Database name..... "DEV"
Database user ID.. "dev"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 3 2008 03:55:37"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "SQL_Server_8.00 "
Patch level. 150
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 16384
MM Used. 4889280
MM Free. 3487552
User and Transaction
Client.............. 250
User................ "PM5CHARL"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "49F6FEDCA000F177897B0017A4ABF059"
Program............. "CL_SWF_RUN_WIM_LOCAL==========CP"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "DEV"
Database Release.... 700
Kernel Release...... 700
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........."C0A8FF46013847F096C00004"
Outbound Queue Name.." "
Client.............. 250
User................ "PM5CHARL"
Transaction......... " "
Call Program........."SAPLERFC"
Function Module..... "ARFC_DEST_SHIP"
Call Destination.... "NONE"
Source Server....... "SILDEV_DEV_00"
Source IP Address... "192.168.255.70"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "CL_SWF_RUN_WIM_LOCAL==========CP" -
in "IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 10
of the (Include) program "CL_SWF_RUN_WIM_LOCAL==========CM088".
Source Code Extract
Line
SourceCde
1
METHOD if_swf_run_wim_utl_internal~get_system_user .
2
DATA: l_excp TYPE REF TO cx_swf_run_wim.
3
4
TRY.
5
IF me->m_int_state-system_user IS INITIAL.
6
me->m_int_state-system_user = cl_swf_run_workflow_properties=>get_rfc_destination_us
7
ENDIF.
8
re_user = me->m_int_state-system_user.
9
CATCH cx_swf_run_wim INTO l_excp.
>>>>>
MESSAGE ID l_excp->t100_msg-msgid
11
TYPE 'X'
12
NUMBER l_excp->t100_msg-msgno
13
WITH l_excp->t100_msg-msgv1 l_excp->t100_msg-msgv2
14
l_excp->t100_msg-msgv3 l_excp->t100_msg-msgv4.
15
ENDTRY.
16
17
ENDMETHOD. "
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
X
SY-MSGID
SWF_RUN
SY-MSGNO
617
SY-MSGV1
WORKFLOW_LOCAL_250
SY-MSGV2
RFC_READ_DESTINATION_TYPE
SY-MSGV3
DESTINATION_NOT_EXIST
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080331
SY-UZEIT
131608
SY-XPROG
SAPMSSY1
SY-XFORM
XAB_READ
Active Calls/Events
No. Ty. Program Include Line
Name
26 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM088 10
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
25 METHOD CL_SWF_UTL_MAIL===============CP CL_SWF_UTL_MAIL===============CM00J 5
CL_SWF_UTL_MAIL=>GET_OWNER
24 METHOD CL_SWF_UTL_MAIL===============CP CL_SWF_UTL_MAIL===============CM002 37
CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
23 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM0IE 38
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
22 METHOD CL_SWF_RUN_WIM_STATE==========CP CL_SWF_RUN_WIM_STATE==========CM021 7
CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
21 METHOD CL_SWF_RUN_WIM_STATE==========CP CL_SWF_RUN_WIM_STATE==========CM01V 12
CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
20 METHOD CL_SWF_RUN_WIM_STATE_FLOW=====CP CL_SWF_RUN_WIM_STATE_FLOW=====CM004 2
CL_SWF_RUN_WIM_STATE_FLOW=>IF_SWF_RUN_WIM_STATE~EXECUTE_STATE_TRANSITION
19 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM09A 72
CL_SWF_RUN_WIM_LOCAL=>SET_STATUS_INTERNAL
18 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM0H3 16
CL_SWF_RUN_WIM_LOCAL=>_SET_STATUS
17 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM04P 7
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SET_STATUS
16 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM011 12
CL_SWF_RUN_WIM_EXECUTION_MGR=>SET_WORKITEM_STATUS_ERROR
15 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM01A 81
CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXCEPTION_RESULT
14 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM00R 93
CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXECUTION_RESULT
13 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM008 144
CL_SWF_RUN_WIM_EXECUTION_MGR=>START_EXECUTION
12 METHOD CL_SWF_RUN_WORKFLOW_START=====CP CL_SWF_RUN_WORKFLOW_START=====CM016 42
CL_SWF_RUN_WORKFLOW_START=>START_WORKITEM
11 METHOD CL_SWF_RUN_WORKFLOW_START=====CP CL_SWF_RUN_WORKFLOW_START=====CM002 33
CL_SWF_RUN_WORKFLOW_START=>EXECUTE
10 FUNCTION SAPLSWW_SRV LSWW_SRVU13 135
SWW_WI_CREATE_VIA_EVENT_INTERN
9 FUNCTION SAPLSWW_SRV LSWW_SRVU11 64
SWW_WI_CREATE_VIA_EVENT
8 FORM SAPLSWW_SRV LSWW_SRVU11 1
SWW_WI_CREATE_VIA_EVENT
7 FORM SAPMSSY1 SAPMSSY1 271
XAB_RUN_DRIVER
6 FUNCTION SAPLSXAB LSXABU01 9
RFC_RUN_XAB_DRIVER
5 FUNCTION SAPLERFC LERFCU01 115
ARFC_EXECUTE
4 FUNCTION SAPLERFC LERFCU02 386
ARFC_DEST_SHIP
3 FORM SAPLERFC LERFCU02 1
ARFC_DEST_SHIP
2 FORM SAPMSSY1 SAPMSSY1 85
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 26 Ty. METHOD
Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
RE_USER
222222222222
000000000000
000000000000
000000000000
L_EXCP
B0004000
90006000
SY-MSGID
SWF_RUN
55455542222222222222
376F25E0000000000000
00000000000000000000
00000000000000000000
L_EXCP->T100_MSG-MSGID
SWF_RUN
55455542222222222222
376F25E0000000000000
00000000000000000000
00000000000000000000
SWFCO_WIM_WI_FORWARD
SWW_WI_FORWARD
555554544554542222222222222222
377F79F6F271240000000000000000
000000000000000000000000000000
000000000000000000000000000000
SY-MSGNO
617
333
617
000
000
L_EXCP->T100_MSG+40(6)
617
333
617
000
000
SY-MSGV1
WORKFLOW_LOCAL_250
54544445544444533322222222222222222222222222222222
7F2B6CF7FCF31CF25000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+48(100)
WORKFLOW_LOCAL_250
54544445544444533322222222222222222222222222222222
7F2B6CF7FCF31CF25000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV2
RFC_READ_DESTINATION_TYPE
54455444544554445444555542222222222222222222222222
263F2514F45349E149FEF49050000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+148(100)
RFC_READ_DESTINATION_TYPE
54455444544554445444555542222222222222222222222222
263F2514F45349E149FEF49050000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV3
DESTINATION_NOT_EXIST
44554445444544554545522222222222222222222222222222
45349E149FEFEF4F5893400000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+248(100)
DESTINATION_NOT_EXIST
44554445444544554545522222222222222222222222222222
45349E149FEFEF4F5893400000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+348(100)
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No. 25 Ty. METHOD
Name CL_SWF_UTL_MAIL=>GET_OWNER
RE_OWNER
%_DUMMY$$
2222
0000
0000
0000
ME->M_OWNER
%_VIASELSCR
0
4
ME
A0005000
E0001000
L_WORKITEM
60009000
3000C000
SY-REPID
CL_SWF_UTL_MAIL===============CP
4455545554544443333333333333334522222222
3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
No. 24 Ty. METHOD
Name CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
EX_SENT_TO_ALL
2
0
0
0
EX_MAIL_OBJECT
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
CL_SWF_UTL_MAIL===============CP
4455545554544443333333333333334522222222
3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME
A0005000
E0001000
OBJECT_HD_CHANGE-ACNAM
SWW_WI_DISPLAY_FOR_MAIL
555554544554455445544442222222222222222222222222222222
377F79F4930C19F6F2FD19C0000000000000000000000000000000
000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000
OBJPARB
Table IT_758[1x570]
\CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJPARB
Table reference: 224
TABH+ 0(20) = E06D6DEFF9060000000000000000000000000000
TABH+ 20(20) = E0000000F6020000010000003A020000FFFFFFFF
TABH+ 40(16) = 042A0200600B000010000000C1248401
store = 0xE06D6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 224 (0xE0000000)
label = 758 (0xF6020000)
fill = 1 (0x01000000)
leng = 570 (0x3A020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000046
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x80095FEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 540 (0x1C020000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
OBJECT_HD_CHANGE-OBJDES
Workflow 405090 set to status ERROR
56766667233333327672762776777245545222222222222222
7F2B6CF70405090035404F03414530522F2000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
%_FSREG_001
OBJCONT
Table IT_760[9x510]
\CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJCONT
Table reference: 225
TABH+ 0(20) = 106F6DEFF9060000000000000000000000000000
TABH+ 20(20) = E1000000F802000009000000FE010000FFFFFFFF
TABH+ 40(16) = 042A0200300B000010000000C1248401
store = 0x106F6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 225 (0xE1000000)
label = 760 (0xF8020000)
fill = 9 (0x09000000)
leng = 510 (0xFE010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000045
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x402D5FEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 541 (0x1D020000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
OWNER
222222222222
000000000000
000000000000
000000000000
SENDER
222222222222
000000000000
000000000000
000000000000
SY-SUBRC
0
0000
0000
SWFCO_MAIL_ERROR_NOTIFY
0002
3333
0002
0000
0000
OBJECT_HD_CHANGE
E ERRORMESSAGEWorkflow 405090 set to status ERROR 00000000000000 F F S
4222222222245545445544456766667233333327672762776777245545222222222222222233333333333333242425
50000000000522F2D5331757F2B6CF70405090035404F03414530522F2000000000000000000000000000000060603
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OBJECT_TYPE
RAW
545
217
000
000
SWFCO_OBJTYPE_BOR
BO
44
2F
00
00
No. 23 Ty. METHOD
Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
LT_AGENTS
Table IT_752[1x28]
\CLASS=CL_SWF_RUN_WIM_LOCAL\METHOD=IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL\DATA=LT_AGEN
Table reference: 207
TABH+ 0(20) = 806B6DEFF9060000000000000000000000000000
TABH+ 20(20) = CF000000F0020000010000001C000000FFFFFFFF
TABH+ 40(16) = 04180100E006000010000000C1248401
store = 0x806B6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 207 (0xCF000000)
label = 752 (0xF0020000)
fill = 1 (0x01000000)
leng = 28 (0x1C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000022
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xA0696DEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 537 (0x19020000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SYST-REPID
CL_SWF_RUN_WIM_LOCAL==========CP
4455545554554454444433333333334522222222
3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD+840(28)
WS20000014
55333333332222
73200000140000
00000000000000
00000000000000
SY-REPID
CL_SWF_RUN_WIM_LOCAL==========CP
4455545554554454444433333333334522222222
3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
FUNCNAME
SWW_WI_DISPLAY_FOR_MAIL
555554544554455445544442222222
377F79F4930C19F6F2FD19C0000000
000000000000000000000000000000
000000000000000000000000000000
SWFCO_WI_REMOTE
R
5
2
0
0
PARAMETER-NAME
WI_ID
54544
79F94
00000
00000
SWFCO_CALLBACK_AGENTS
CALLBACKAGENTS
54444444454444552222222222222222
F31CC213BF175E430000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
PARAMETER-VALUE
000000405090
333333333333
000000405090
000000000000
000000000000
ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD-WI_ID
000000405090
333333333333
000000405090
000000000000
000000000000
PARAMETER
807020C0
7080A050
00000000
00100010
LS_MAILOBJ
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ME
60009000
3000C000
SWFCO_WORKITEM_OBJECT
_WORKITEM
55454454422222222222222222222222
F7F2B945D00000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
No. 22 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
SWFCO_WORKITEM_OBJECT
_WORKITEM
55454454422222222222222222222222
F7F2B945D00000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No. 21 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
IM_STATE_ACTIONS
Table IT_279[30x152]
\CLASS=CL_SWF_RUN_WIM_STATE_FLOW\DATA=M_STATE_ACTIONS
Table reference: 112
TABH+ 0(20) = 90CE53EFF9060000B04D6BEFF906000000000000
TABH+ 20(20) = 70000000170100001E0000009800000090010000
TABH+ 40(16) = 049A01007004000010000000C9248001
store = 0x90CE53EFF9060000
ext1 = 0xB04D6BEFF9060000
shmId = 0 (0x00000000)
id = 112 (0x70000000)
label = 279 (0x17010000)
fill = 30 (0x1E000000)
leng = 152 (0x98000000)
loop = 400 (0x90010000)
xtyp = TYPE#000009
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 1 (ItIndexLinear)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xF0C453EFF9060000
pgHook = 0xF0CE53EFF9060000
idxPtr = 0x50E253EFF9060000
shmTabhSet = 0x0000000000000000
id = 207 (0xCF000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 48 (0x30000000)
lineAlloc = 48 (0x30000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x204C6BEFF9060000
collHook = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SWFCO_WI_NO_DEADLINE
0000
3333
0000
0000
0000
L_OBJ
A0005000
D0002000
ME
A0005000
D0002000
ME->IF_SWF_RUN_WIM_STATE~NEW_STATUS
ERROR
455452222222
522F20000000
000000000000
000000000000
<%_L003>
ERROR
455452222222
522F20000000
000000000000
000000000000
SY-REPID
CL_SWF_RUN_WIM_STATE==========CP
4455545554554455545433333333334522222222
3CF376F25EF79DF34145DDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
<%_L004>
F
4
6
0
0
<STATE_ACTION>
FERROR 01DYN_SEND_ERROR_REPAIR_MAIL
4455452222222334545544454554555454455444422222222222222222222222222222222222
6522F200000000149EF35E4F522F2F250192FD19C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000
<%_L002>
<%_L002>-WI_STAT
SYST-REPID
CL_SWF_RUN_WIM_STATE==========CP
4455545554554455545433333333334522222222
3CF376F25EF79DF34145DDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SWFCO_WI_STATUS_WILD_CARD
222222222222
A00000000000
000000000000
000000000000
<%_L002>-WI_TYPE
<STATE_ACTION>-METHOD
DYN_SEND_ERROR_REPAIR_MAIL
4545544454554555454455444422222222222222222222222222222222222
49EF35E4F522F2F250192FD19C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000
%_SPACE
2
0
0
0
LV_EXCP
F0000000
F0000000
No. 20 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE_FLOW=>Hello,
Get help from your abaper on this.
Vinay -
How to remove build errors while creating an Order App. for Handhelds
Hi Friends,
As per the Tutorial: Developing an Order Application for Handhelds provided at the given link http://help.sap.com/saphelp_nwmobile71/helpdata/en/8F/0B674240449C60E10000000A1550B0/frameset.htm
I am creating mobile application for PDA . I have finished many steps but at one step I am getting build errors.
The step is when we create service and paste the code provided in the document.
public void generateTestData() {
//@@begin implementation
if( !(((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).getOrderOrderheaders().size() > 0))
OrderOrderheader order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
order.setOrderid("0023378");
order.setLongtext("Repair front door");
order.setServiceunit("SU01");
order.setCreatedOn(Date.valueOf("2007-06-30"));
order.setCreatedAt(Time.valueOf("08:45:00"));
order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
order.setOrderid("0024897");
order.setLongtext("Analyse malfunction");
order.setServiceunit("SU01");
order.setCreatedOn(Date.valueOf("2007-07-01"));
order.setCreatedAt(Time.valueOf("09:00:00"));
order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
order.setOrderid("0034534");
order.setLongtext("Repair escalator");
order.setServiceunit("SU03");
order.setCreatedOn(Date.valueOf("2007-07-03"));
order.setCreatedAt(Time.valueOf("19:45:00"));
order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
order.setOrderid("0024589");
order.setLongtext("Analyse computer problem");
order.setServiceunit("SU04");
order.setCreatedOn(Date.valueOf("2007-07-01"));
order.setCreatedAt(Time.valueOf("15:45:00"));
order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
order.setOrderid("0027890");
order.setLongtext("Repair door lock");
order.setServiceunit("SU03");
order.setCreatedOn(Date.valueOf("2007-07-05"));
order.setCreatedAt(Time.valueOf("10:00:00"));
OcaRoot.getInstance().commit();
//@@end
The issue is I am getting a red line below each set methods as I have shown by underlining. I am struggling with how to rectify the error.When I write ORDER and write . after it , it shows only get methods in the popup not the set methods.
Please suggest .
It will be a great help.
Regards,
NiteshHi Nitesh
Check if the data object you created is bi directional in DOE?
Regards
Vidyadhar -
Error while saving Prod order - "Class for order classification"
Hi all
I am getting the following error while saving the Production Order -
"Class for order classification has not been generated".
I went into the custiomization settings and tried to generate the class. But I get another error "No batch input data for screen SAPMSSY3 0131". The line items are also all in red and green.
Any help would be highly appreciated.
Thanks in advance.
HrishiSolved
-
How to change P.O. duplication message type from warning to error for Order
Hi Experts,
I have a requirment to change P.O. duplication message type from warning to error for Order only not OrderTemplate. I can easily change message type in BAdI ISA_BASKET_MSGS, but I can't find the parameter to know if it's Order or OrderTemplate (DocType). If this BAdI is not good way, is there other way? and how to please?
Please advise / help..
Thanks, JinThanks Easwer for your help.
The info for getting status from function is very clear and I followed you instruction and completed the coding in BAdI and tested it successfully .... Thank you very much. I need to learn where I can see the system status of the template, i.e. I1034 (Order Template) or Order or Quotation .....? if I need to filter out Quotation, I can easily do it in the BAdI. Could you please provide me more details?
Thanks again, Jin
Thanks again, Jin -
Unit of Measurement - MB31 Goods receipt for order
Hi,
we maintained production unit (MARC-FRTME) for some materials. Now the goods receipt for order with MB31 suggests this production unit (MSEG-ERFME). The customer's requirement is that MB31 suggests the quantity in base unit of measure (MARA-MEINS). The quantity should be the entered value in the confirmation of the last operation.
I implemented BADI WORKORDER_GOODSMVT (IF_EX_WORKORDER_GOODSMVT~MANUAL_GOODS_RECEIPT) to convert the quantity from production unit to base unit of measure. The stock is increased correctly but the Purchase Order Unit of Measure (MSEG-BSTME) is in base unit and not in production unit. If the material document is displayed with MIGO the quantity ordered (Tab Quantity) is wrong. The quantity is the production quantity and the unit is the base unit.
For example:
MARA-MEINS: PC
MARC-FRTME: XY
1 XY <=> 12 PC
Production order: 13 XY (=156 PC)
MB31 with 100 PC
MIGO: Quantity orderd: 13 PC (instead of XY)
Does anyone have an idea how this problem can be solved?
Thanks!
Best regards
MartinYou can attend this issue by activating batch classification. Extend the classifcation view and maintain batch classification for the Unit of measurement of the material.
Chris -
Internal order - Error - Different logical system for order
Hello all,
I try to send IDoc (INTERNAL_ORDER) from system A to system B.
I have done:
- BD64 / WE20 / WE21
But after having customizing I have got following error:
Different logical system for order xxxxxx
Message no. 2075ALE001
Diagnosis
Internal order xxxxxxx already exists in system B. Its master system B is different from the master system A of the new internal order to be distributed with the same order number xxxxxxx.
System Response
Internal order xxxxxxx with master system A cannot be distributed in system B.
Procedure
Check customizing for ALE for internal orders.
How to solve this?
My aim is to maintain internal order master data in test system.
Thanks for your help.
DavidI have found something.
If I change in table AUFK, logical from empty to A (master) and I run IDOC then IDOC has been correctly integrated.
Then: how to define "master"? -
CORM --- There is still WIP for order u201Cu2013 error
Dear SAP Experts
When doing CORM (close process order), the error message u201CThere is still WIP for order u201Cu2013 WIP in financial accounting is still to be cleared.
For this process order, the WIP is calculated in period 11 2009,The order was final confirmed and final settlement to COPA was done on feb 2010, So we tried to reverse the settlement , the settlement on feb 2010 is getting reversed ,but the WIP in period is not reversing in KO88
How to reverse the WIP posted in period 11 2009 ,now the period is closed for year 2009. now the order status was in CNF . Please suggest a solution for this .
Thaanks
ParthaHI,
WIP-posting for a given period is reversed when the settlement for this period is reversed.
As this is in an already closed fiscal year there is no way to do so as this will change accounting figures for closed fiscal years.
What causes the "WIP is not zero for order..." message? This needs to be solved and I doubt that the reversal of the old WIP settlement will help you on this.
Best regards, Christian -
SAP PM : Unprocessed future change recs for order number : Error Message 688
Dear Experts
I received the following message when trying to close a PM order.
Unprocessed future change recs for order number prevent del. flag/c - Error Message 688
Kindly advise on the steps to be taken to resolve the above error.
Thanking you in advance for your assistance.
Regards
BarryHi Barry,
Please find below thread for your reference.
Error message when business completion of a production maintenance order
Unprocessed future change recs for order prevent del. flag/completion
Regards
Terence -
HI,
Actually I am in a Roll Out project. Due to some error in configuration Maintenance order cannot calculate costs. After some time we track the error and made rectification for that.
But, for orders already created before the rectification cannot have costs. My client asks me to track those costs. How will i do that? The costs for order after rectifiction is working well?
How i made the reflection for previous orders too?
Regards,
VarmaHi,
You can use transaction OLI5 (or program RIPMCO00) to recalculate costs for a range of orders.
-Paul
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics -
Error during availability check for order
Hi PM experts,
How can I make below warning message (W) to an error message (E)?
Message no: CO820 (Error during availability check for order)
Regards,
Nizam
PM ConsultantHi,
you can cantrol not to release maint orders in case if parts are missing by OIOI transaction, here under Material Availability against Release material you maintain option 3 No release if parts are missing. This way you can achieve this. If there are other components which has stock on Maint order then delete the un-available material from maint order then it will allow you to release the order.
Hope availability check rule is maintained on material master.
Hope it helps.
Regards,
N.Nagaraju -
IW32: Error getting message (Text for order header not maintain in lang.EN
Hello All,
We just starting getting this message in IW32 and IW33 stating (Text for order header not maintained in language EN) then all the pre-existing description test disappeared.
We have not done any configuration change in this particular system.
Can anyone help to resolve this.
ThanksHi,
As with most SAP messages it is always a good idea to trust what it is saying.
The system is telling you that KG has not been created in the English language.
Go to transaction CUNI to check the settings.
Select the Unit of measure for "MASS" (from the drop down list) and check the entries for UOMs.
KG should be there and should have an English description (the message said it was not there for EN)
If it is there and set up correctly then there might have been something else in the UOM field? You didn't enter " KG" did you (a blank character then KG?)
Steve B -
No maintenance plan has been confirmed for Order 000004024181; Follow-up ca
Hi
I try to close a list of preventive order (initiated by maintenance plan) from the transaction IW38 but the system displays the following error message
"No maintenance plan has been confirmed for Order 000004024181; Follow-up call exists
Message no. IW597"
thank you for your helpHi,
You mean close -
>TECO???
If yes Go in IW38 select all orders ,click Enviroment Tab and you can do the TECO but that order should not have Open reservation.
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Aug 26, 2010 1:02 PM -
Invoice is not allowed for order 00065
Hi experts,
This error is relating to the Accounts payables(SAP). The error occurred and the invoice has fallen out from ERP (SAP) while posting the invoice. The error is "no invoice is allowed for order 00065".
some Inputs: if you go to ME23N screen line item details invoice tab you can find the check boxes like Incoming Invoice, cost centre and Order. Usually for a particular PO incoming invoice and cost centre check boxes will be checked but in this case Order check box is checked and the invoice has fallen out from ERP.
Could any body please let me know how to resolve this issue in SAP. I'm not FI/CO consultant but SAP BW if I know i can guide team.
Thanks in advance,
amarnathDear,
What is message number? Did you assign the usersttus in BS02?
For allocation activity costs, we need to define activity type in KL01 by specifying the unit of measurement of the particular activity type (like machine - Hours etc.). While creating activity type, we will assign a secondary cost element (with category 43) in the activity type through which the activity cost will flow.
After that we will plan for cost center in KP06 (cost elementwise). Then we will plan machine hours in KP26 where we will link the activity type to a particular cost center.
When we do price calculation in KSPI, system checks the planned costs for cost center (in KP06) and also checks the machine hours planned (in KP26) and gives the cost for the particular activity type.
Please check the above in the system
Regards,
R.Brahmankar -
Error in creating Process Order
Hi All,
I have problem in creating a priocess order. The error message is
No default value maintained for op. generation for order type ZPI3 (mat FXX1000)
The receipi is already defined, but the message says that no routing found.
Please support
SAPXPTHi,
Go to OPJG, enter the plant & specify the order type ZPI3 then specify the following details for this order type i.e. control key, denominator & numerator as 1, base qty as 1 & operation as 0010.
Now about the query as to why the recipe is not picked up, check the status of the recipe, the validity dates & lot sizes. It could be that the valid from date of the recipe is later than the required date.
Also go to COR4 & check the order type dependent parameters for this order, it should give you a clue.
Revert if you face any issues.
Regards,
Vivek
Maybe you are looking for
-
I lost all my songs when syncing
When I downloaded the new version I lost all my contacts and all my apps and all my downloaded songs. I've managed to get everthing else back except for the music. I had approximately 150 songs. Any help would be greatly apreciated. Thanks,
-
How to read the content of html page? (written in JSP)
The same with readContent("http://www.urcompany.com/readPage.html")
-
Persisting Configuration in Config.xml, Using Administration MBeans
Dear Friends, I am facing a problem on persisting the configuration, using the administration Mbeans. I am using weblogic 6.1 sp1 version. And i am running weblogic in production mode. i have made the AutoDeployEnabled=false in my config.xml file. In
-
I can't install any new applications..... error no mountable files
every time I attempt to install a download I get an error that says there are no mountable files...... what do i do??????????
-
How to instruct servlet to output to another frame?
Hi all, This is what my application is about: Display a page with 3 frames. The 1st frame is a form, and the user is to fill out the form and submit a post request. The servlet invoked will perform some query and generate a list of results with links