CORM --- There is still WIP for order u201Cu2013 error

Dear SAP Experts
When doing CORM (close process order), the error message u201CThere is still WIP for order u201Cu2013 WIP in financial accounting is still to be cleared.
For this process order, the WIP is calculated in period 11 2009,The order was final confirmed and final settlement to COPA was done on feb 2010, So we tried to reverse the settlement , the settlement on feb 2010 is getting reversed ,but the WIP in period is not reversing in KO88
How to reverse the WIP posted in period 11 2009 ,now the period is closed for year 2009. now the order status was in CNF . Please suggest  a solution for this .
Thaanks
Partha

HI,
WIP-posting for a given period is reversed when the settlement for this period is reversed.
As this is in an already closed fiscal year there is no way to do so as this will change accounting figures for closed fiscal years.
What causes the "WIP is not zero for order..." message? This needs to be solved and I doubt that the reversal of the old WIP settlement will help you on this.
Best regards, Christian

Similar Messages

  • There is still a purchase order commitment for WBS

    Hi All,
    We need to close  whole project while closing I am getting the attached error.
    There is still a purchase order commitment for WBS
    Additional Information or Comments: = I have checked and closed all purchases order commitment. But still the project shows the below error     .
    Edited by: nandhasapfi on Sep 22, 2011 10:52 AM

    Hello,
    This message is being output correctly as the AuC still has
    values against it.
    These values must be cleared before you can close the WBS element.
    Please do a FUL settlement against the WBS element to clear
    these values and then try to set the CLSD status again.
      There are two ways to 'clean' the AuC, so that you can deactivate it
      and close the wbs element:
      1. Post a manual retirement of the AuC to clean it.
      2. Create a new AuC and use it for all the differences in the final
         settlement.
    I hope this helps,
    regards
    Ray

  • There is still a purchse order commitment for ORD X for CO_ORDER archiving obj

    Dear Experts,
    I am facing issue for CO_ORDER archiving object. I am getting error saying like
    " there is still a purchase order commitment for ORD 200060" and
    "order 200060 still has at least one purchase order that you need to do".
    screen shot attached for reference
    so Please help me to solve this issue.
    Thanks in advance,
    Ningappa S M

    Hello Manju Sir,
    Now that issue setting of deletion indicator is got successful. I mean I set residence time 1 as 0 and I tried to archive and I got successful. but I am facing the issue saying " there is still a purchase order commitment" , "there is a still Purchase requisition assigned to order" and
    "still has at least one purchase order that you need to delete" etc for all orders when i set residence time 1 as 39 months (even i tried by setting the residence time 1 as zero i am getting the same error messages) and residence time 2 as 0. for these orders deletion flag itself is not getting set. so please help me for this.
    Thanks,
    Ningappa

  • SAP PM : Unprocessed future change recs for order number : Error Message 688

    Dear Experts
    I received the following message when trying to close a PM order.
    Unprocessed future change recs for order number  prevent del. flag/c -  Error Message 688
    Kindly advise on the steps to be taken to resolve the above error.
    Thanking you in advance for your assistance.
    Regards
    Barry

    Hi Barry,
    Please find below thread for your reference.
    Error message when business completion of a production maintenance order
    Unprocessed future change recs for order prevent del. flag/completion
    Regards
    Terence

  • WIP for order

    Please explain about work in progress for order

    Hi Balaji
    WIP means work In process. That means you have issued the components to production & the production not yet completed.
    This situation you will normally during month ends/year ends.
    you have issued components & production is half way & not yet fully confirme & Goods not received.
    Then to calculate the cost of the components & aslo acdtivity costs.
    Co guy will run WIP transaction KKAX or KKAO.
    This way they will arrive at cost & include in monthly finance statement.
    Hope it is clear.
    Regards
    YMREDDY

  • Are there discount promo codes for ordering multiple books through IPhoto?

    Does anyone know of discount promo codes for IPhoto books?

    no
    multiple copies of the same book can be ordered in one order for one shipping charge
    LN

  • 10.6.8 Netboot - "Still waiting for root device"

    Hi all,
    I am having trouble with one particular 10.6.8 Netboot image that is hosted on a Mac Pro running 10.5.8 Server.  (The main 10.5.8 Server is currently hosting about 15 other Netboot and Netrestore images that work with no problem.)  I built the image on a 10.6.8 Server using System Image Utility from a fully updated 10.6.8 restore image on an external hard drive.  The external drive was started up on MacBook, MacBook Pro, and iMac systems ranging from Late '06 to Early '11 revisions.  Software update was run on every startup, but came back fully up-to-date every time and never encountered problems starting up each from the external drive.
    I then ran Disk Utility permissions repair on the external drive from the 10.6.8 Server Mac Pro and built the Netboot image in System Image Utility.  Although I am fairly new to this process, I have already successfully built several 10.6.8, 10.7.5, 10.8.5, and 10.9 Netrestore images as well as one 10.9 diagnostic Netboot that all work perfectly.  I followed the same process when creating the 10.6.8 Netboot image.
    The image I created, called 10.6.8 Diags 3.0, shows up in the Netboot list, but when I attempt to boot it shows the Apple logo for a bit before showing the "circle slash" symbol.  Verbose mode shows that it hangs when starting and repeats "Still waiting for root device" over and over again and never does anything.
    I have rebuilt the 10.6.8 Diags 3.0 Netboot image several times to rule out the possibility of corruption durring image creation.  I have also tried to create the image from a Firewire attached external drive as well as building the data on the external drive into a .dmg on the 10.6.8 Server and then creating the image from that.  All methods of creating the image yeild the same "Still waiting for root device" error when attempting to start up on any system supporting the 10.6.8 kernel.
    Netboot settings in Server Admin are the same as other Netboot images that are functioning: enabled, diskless, Intel (grayed out), and NFS.  I have verified that all enabled image index numbers are unique and even tried several different index numbers on the problem Neboot image.
    Again, all other Netrestore images I created on the same 10.6.8 Server work just fine when added to the Netboot directory on the 10.5.8 Main Server, but the Netboot image of 10.6.8 Diags 3.0 does not.  I'm not sure what else to try at this point, any ideas?

    Ooooh. I've been reading similar pages on cidori.org and just assumed it was one of those. Remarkable how my google searches didn't find that one. Thanks for the pointer, and I'll go try it.
    Thanks again, Dan.

  • Order Budgeting error

    Hi Experts,
    I did all the settings mentioned in this thread. But when i go to Ko22, overall budget option gets invalid, there is no option to total up yearly budget and so while saving this budgeting system is giving me a error that ' Overall budget is less that the cumulative budget' and system does not allow to save in ko22.
    Pls guide is there any extra prerequiste for order budgeting. I have done following settings,
    - Maintain Budget profile
    - Assign budget profile to order type in ' Configure Order Types'.
    Pls guide.
    Thanks & regards,
    Kedar

    In the budget profile make sure that u checked the "Total Values" and "Annual values" check boxes.

  • No delivery if order has error in CRM

    Hi All,
    I want to restrict delivery if system has any error in CRM Order.
    Requirement,
    (1) Created orders are successfully replicated in ECC
    (2) After making some changes in existing order changes are not replicated.
    (3) I want to restrict delivery if order has an any error in CRM.
    Regards
    Jay

    Hi Jay,
              For your Requirement to restrict delivery in CRM System
    SAP CRM has preset Functionality for Orders with Error Status in SAP CRM they do not Replicate to ECC System, So if your Order has an Error Status then it shall not Replicate to ECC System.
    For Achieving your Required Details you may Follow the Steps as mentioned below
    (1) Created orders are successfully replicated in ECC
    For Replication of the Order you need to Configure the Middleware Parameters and Subscription and Publication for Particular System Status for the Order to Replicate to ECC System
    (2) After making some changes in existing order changes are not replicated.
    For Replication of the Order after Changes,Check the Status Profile there is a option for "Business Transaction Control" which should be set to To be Distributed which then allows the Order to Flow to the ECC System after changes have been Made.
    (3) I want to restrict delivery if order has an any error in CRM.
    For this Process you shall require to Configure the System as to Distribute the Order at a Particular status which is the Final status in CRM and you shall have to Configure the Processing of Outbound Delivery on the Same status,due to which if Errors are Present in the Order the Order with Errors doesnt flow to ECC and you shall be able to Stop Processing of the Orders with Errors.
    Hope it Answers  your Queries...
    Revert Back for Further Queries..
    Thanks and Regards
    RK.

  • After downloading Maverick, my photobooth images were out of chronological order. I've now downloaded Yosemite and they are still out of order. Is there a fix for this?

    After I downloaded Maverick, I noticed that my photobooth images were out of chronological order. I've since downloaded OS X Yosemite (10.10) and they are still out of order. My version of Photobooth is 7.0 (719). Is there a fix for this? Many thanks in advance.

    8-doing a factory reset, then repeating steps 1 through 6
    Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

  • I purchased a Student/Teacher addition 2 days ago and still cannot download for order number AD004080514EDAU. It is supposed to be 24 hours but there is still no progress

    I purchased a Student/Teacher addition 2 days ago and still cannot download for order number AD004080514EDAU.
    Adobe promised 24 hours - now 36 so what's happening

    Alicemarie if you are facing difficulties with your order then please contact our support team directly at Contact Customer Care.
    Did you utilize your e-mail address associated with your education organization when making your order?

  • I changed my i tunes username and password a while ago, but there are still remnants of the old one appearing. I now want to wipe my iPhone, but can't as it is logging me in with my old username, and asking for the old password, which i can't remember.

    I changed my itunes username and password a while ago, but it still sometimes keeps popping up. I now want to erase my iphone, but i can't because it is asking me for my old password, which i can't remember. My old user name was an email address, however i no longer have the email address!! Help please community.

    https://iforgot.apple.com/
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)

  • Error-"There is still a purchase requisition commitment for ORD #########."

    Hello All,
    I am trying to set deletion flag an internal order using transaction KO02 and am receiving an error "There is still a purchase requisition commitment for ORD #########."
    1> What does this mean.
    2> How can I solve this problem
    Moosa

    Hello Moosa,
    When you want to close an order, the system checks for dependanting data
    to alert you that there are open items that have not been received, etc.
    You need to close the purchase orders and requisitions so that the  order is no longer "expecting" postings from these dependant objects.
    Please consider running the following reports which have been known to correct inconsistencies in commitments:
    Report RKANBU01 resets commitments on orders and ranges of orders.
    (See note 100409) (Note 125266)
    Reports ZKAOIDE0 & ZKAOIDE1 removes commitments which refer to purchase orders and purchase requistions which do not exist.
    (See ANote 100409)
    Report RKACOR04 corrects mistakes between total and line items in
    database tables. (See Note 113423)
    I would recommend implementing these programs in a test system first.
    You may also want to consider Notes 152571 & 157369 if you are receiving error messages KO447 and/or KO448 when attempting to delete/close the order.
    Best Regards,
    Gladys xing

  • There was no way to order AppleCare for the iPhone 5 using the online AppleStore to have it activated automatically. Am I missing something?

    There was no way to order AppleCare for the iPhone 5 using the online AppleStore to have it activated automatically. Am I missing something?

    I must have missed the option to add AppleCare+ to my iPhone 5 pre-order, too.  Fortunately, I was able to obtain confirmation from an Apple representative that AppleCare+ can still be added to a new iPhone 5 within 30 days of the device's ship date.
    My iPhone 5 Ordering Situation:
    Successfully submitted pre-order at 2:05am CST
    Realized I did not add AppleCare+
    Tried to add it as a separate product
    Unable to add AppleCare+ after submiting pre-order
    This Morning:
    I just got off the phone with an Apple representative.  He assured me that, once my iPhone 5 arrives on September 21, I will be able to: 1) call 1-800-MY-APPLE and have AppleCare+ added to my iPhone 5;  2) go into an Apple Retail Store and have AppleCare+ added to my iPhone 5.  He said I would have thirty days from my device's ship date (September 21) to add AppleCare+ to it.  He also recommended that, if I wanted to have AppleCare+ added at an Apple Retail Store, I should make an appointment as soon as possible.  Because I was still concerned something might go wrong, the Apple representative emailed me a copy of my case number to use as a reference in case I have any issues obtaining AppleCare+ on September 21.
    Caveats & More Information:
    I ordered through the Apple Store app on my iPhone 4
    I live in the United States
    My carrier is AT&T
    I have a case number and repeated assurances from an Apple representative
    While your situation may differ from mine I do hope you're able to add AppleCare+ to your iPhone 5 once it arrives, either by calling 1-800-MY-APPLE or by making an appointment at your nearest Apple Retail Store.
    Best Wishes,
    Dylan

  • I've chosen "never" on my screen saver however the screen saver still comes on and there is no way for me to change it, how do i change it? I don't wish to have a screen saver on when I'm watching TV or movies on my laptop

    I've chosen "never" on my screen saver however the screen saver still comes on and there is no way for me to change it, how do i change it? I don't wish to have a screen saver on when I'm watching TV or movies on my laptop.

    Step one is to log into a newly created admin user account and see if the problem persists. Also,

Maybe you are looking for