Error in GUI_DOWNLOAD in background processing

Hi All,
We have a program that is using GUI_DOWNLOAD to download the results in text and .dbf format. In foreground it is working fine.But in background the job is getting cancelled with a log that "Error in Downloading file."
Please let me know if there is any solution for this.

Hi,
GUI_DOWNLOAD does not work properly in the background.
You can change the GUI_DOWNLOAD by
'open dataset .. for output... ' and 'close dataset..' and use 'transfer..' to fill up the file.
regards,
Rolf

Similar Messages

GUI_DOWNLOAD and background processing

Hello,
I have created a process which creates a file. this process uses GUI_DOWNLOAD to put the file on the users C drive or other directory on our network. The user wants to run this process in background and the program is returning a 6 (error unknown) from the GUI_DOWNLOAD FM. I was looking on SDN and found out the GUI_DOWNLOAD only works in foreground. You have to use OPEN and CLOSE DATASET statements to process in background. I am thinking about putting a button to denote foreground/background processing and using the appropriate statements to process the file. I will then have to get the file from the app server to a place will the user can get access to it.
<b>first question</b> - is there a FM to do a FTP from the app server to a directory on our network for the user to access?
<b>second question</b> - is this the right approach or is there something else that I should be doing.
thanks in advance for your help

Hi,
Yes, your right, GUI_DOWNLOAD wil not work in background mode, you need to place the file in Application server, here.
See the below link for a FTP program, use the proper commands(i do not know whether downloading the file is possible through the commands)
http://www.sap-img.com/ab003.htm
or else, write a small program which downloads the data from the application server, but it should run in the foreground
Regards
Sudheer

Background Process Error

Folks, running V8.0.5 on an NT 4 Server. Database won't start,
usual ORA-3113 issued. Turns out when I check the trace files
that Checkpoint process is falling over with a 210 error. As
this is an error associated with a background process I cannot
find any documentation that will give me a clue as to why it is
falling over. Grateful for any help. Enclosed is a sample of the
SIDCKPT.LOG file
*** SESSION ID:(4.1) 2001.10.05.08.41.20.453
error 210 detected in background process
Dump file D:\orant\RDBMS80\trace\we99CKPT.TRC
Fri Oct 05 09:00:54 2001
ORACLE V8.0.5.0.0 - Production vsnsta=0
vsnsql=c vsnxtr=3
Windows NT V4.0, OS V5.101, CPU type 586
Oracle8 Enterprise Edition Release 8.0.5.0.0 - Production
PL/SQL Release 8.0.5.0.0 - Production
Windows NT V4.0, OS V5.101, CPU type 586
Instance name: we99
Redo thread mounted by this instance: 0 <none>
Oracle process number: 5
pid: 1c4
End of Message

Hi,
Response as per your similar question on 12th July:
Check the value of distributed_lock_timeout database parameter.
If the parameter is not set, it will default to 60 seconds. Try increasing this value to at least 120 and retry.
If the solution above does not work, one of the first places to look when assessing problems with the engine is the
Oracle Workflow Monitor. Where this is unavailable, run the script wfstatus.sql
$FND_TOP/sql/wfstatus.sql - Embedded in Oracle Applications
$ORACLE_HOME/admin/sql/wfstatus.sql - Oracle Workflow Standalone

Problem in background processing of a report

Hey,
I am facing a problem while executing a report in background. In foreground its running absolutely fine but in background the job get cancelled every time .
can any body tell me how to find the cause of the problem and how can we debug the report in background
thanks
bobby

Hi Amole,
following error is encountered in background processing
ABAP/4 processor: GETWA_NOT_ASSIGNED
job cancelled
thanks
bobby

Cannot start background process DTPR_13362_

Hi ,
Whenever DTP is executed in the Dev Server,it throws an error.
Error msg: Cannot start background process DTPR_13362_1 26.09.2011 14:17:44 1 Min. 50 Sec.
while checking the message in the monitor screen the cursor is at this function.
CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack
Please let me know what needs to be done here so that DTP processed sucessfully.
This is urgently required..thanks..
Regards,
Kalim.

Hi
Check how many parallel processes are defined for this DTP.
display the DTP in RSA --> in menu bar click on "goto" --> "settings for batch manager"
In the next screen you will get the number of processes assigned to this DTP.
When you are running this DTP, check these many background processes are available in your system.
If you want you can decrease this number9by default it will be 3)
Regards,
Venkatesh

Disk Utility Background Process Fails. Combo Updater doesn't find Disk

When I start Disk Utility, I get a message "error starting disk utility background process" with a "quit" button which can't be clicked. So, I force quit.
When I try to run a combo updater (10.4.3 or 10.4.7), the "select volume" window shows no volumes.
In both instances, the system log tells me:
DiskManagementTool crashed
And the console log tells me:
dyld: lazy symbol binding failed: Symbol not found: _GPTuuidType2Human Referenced from: /System/Library/PrivateFrameworks/DiskManagement.framework/Resources/DiskManage mentTool
Expected in: /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
dyld: Symbol not found: _GPTuuidType2Human
Referenced from: /System/Library/PrivateFrameworks/DiskManagement.framework/Resources/DiskManage mentTool
Expected in: /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
I have run fsck -y in single-user mode, repair disk and permissions in disk utility from my install disk, and Disk Warrior. Still the same.
Is there any way I to fix this without rebuilding the machine?
Thanks,
Gary
Powerbook G4 Mac OS X (10.4.3)

Hello
I had the same problems. I don't know the cause but it surely comes from the "software update" software. In the future I will only use the combo updater that you can find on http://www.apple.com/support/downloads/macosxupdate1047comboppc.html
I ended up reinstalling 10.4 from scratch and then running the combo update. It know works fine.
Regards

Background Processing? how schedule job for "System Error" Message .

Hello everyone,
in sap help i have read.
http://help.sap.com/saphelp_nw04/helpdata/en/5a/f72040599a8f5ce10000000a155106/frameset.htm
PCK> Monitoring>Message Monitoring-->Background Processing
you can schedule jobs for various background processing:
●     Archiving of messages processed successfully
●     Deletion of messages that are not to be archived
●     Restarting of messages with errors
●     Rescheduling of lost messages
can anyone understand this docu?
give me some introduction, how can i define and schedule these jobs ?
thx in advance!!
best regards
Yaning

Background Processing
Prerequisites
You have started the message monitor on the initial screen of the PCK and are in Background Processing.
Features
Archiving
You require two archiving sessions to archive messages:
●     One session to write the messages to the archive
●     One session to delete the persisted messages that have been archived
To do this, you schedule an archiving job, which implicitly schedules the sessions to write to the archive and delete the archived messages.
You can define one or more rules for each archiving job; these rules contain conditions that a message must meet in order to be archived by the job. At least one of the defined rules must be met for archiving to take place.
All information that is displayed for a message in message monitoring is archived, in addition to the audit log for each message.
Deleting
A standard delete job is created automatically. It runs once a day. You can schedule additional delete jobs; however, you cannot define rules for them.
Restarting
Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the system error status).
You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
Rescheduling
A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.
Thx Aamir.
But I mean the messages with errors in Adapter Engine , not in Intergrations Engine.
the situation is like Naveen Pandrangi's WebLog
II. Errors in Adapter Engine [XI : How to Re-Process failed XI Messages Automatically|XI : How to Re-Process failed XI Messages Automatically]
I
Till now we have seen how to resubmit/restart message that failed in Integration Engine. One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
*how can i schedule a job to automatically restart these messages with errors?
best regards
Yaning
Edited by: Yaning Liu on Aug 18, 2008 1:43 PM

ERROR while uploading the data into ztable with background processing

Hi gurus,
i am trying to upload the data from excel file to internal table
its working fine ..
but........
if i try to upload the data with background processing , in sm37 it is saying "error during the upload of clipboard contents".
Regards,
Sri

Hi,
FM GUI_UPLOAD doesnt work in background, use dataset to upload it from application server.
refer below code
*--Local Variables
DATA : l_file TYPE string,
         l_line TYPE string,
         l_index TYPE sy-tabix.
*--Clear
CLEAR : l_file.
l_file = p_ipfile.
*--Read the data from application server file.
OPEN DATASET l_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
*--Error in opening file
    MESSAGE i368(00) WITH text-005.
ENDIF.
*--Get all the records from the specified location.
DO.
    READ DATASET l_file INTO l_line.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT l_line AT cl_abap_char_utilities=>horizontal_tab
                      INTO st_ipfile-vbeln
                           st_ipfile-posnr
                           st_ipfile-edatu
                           st_ipfile-wmeng.
      APPEND st_ipfile TO it_ipfile.
    ENDIF.
ENDDO.
Regards,
Prashant

Error: The request could not be submitted for background processing

I'm getting an intermittent error in our custom reporting application using Crystal Reports Server XI R2 w/ SP1:
Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt: The request could not be submitted for background processing.
I'm using the Report Application Server XI Release 2 .NET SDK. This is the code that produces the exception (The export type is pdf):
ByteArray ba = this.reportClientDocument.PrintOutputController.Export(ConvertExportReportTypeToCrystalReportExportType(),0);
The error is also logged by Business Objects in the crystalras log file:
ErrorLog 2007 12 3 12:24:56.531 6624 4872 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:685 ErrorMsg:" Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt:
The request could not be submitted for background processing." DetailedErrorMsg:""
This has been happening regularly about once a week, at which point the RAS fails and no more reports can be run until the CMS and RAS servers have been restarted.
Has anyone else had this problem, or have any ideas?
Thanks

It was not a bug (not in all cases anyhow), but it is one of those error message that might as well say; something went wrong. I wrote an article on the most likely cases for the error and the article can be downloaded from here;
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33
See if the above article will help you out. Please note that having the latest SP / FP is step one. The downloads page is here;
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Error during background processing which is created by Std.program RFBIBL00

Hi Gurus,
     I am using standard program RFBIBL00 to generate batch session for the Tcode FB01.
     My BDC is working fine , if i choose foreground or display error only option in SM35.But when i process the same session in
     background it is giving error Field BSEG-DMBTR does exist in SAPMF05A 0302.
                             One more thing i want to point out when i process the session in forground or in display error only option
                  there i am getting information message Field BSEG-DMBTR does exist in SAPMF05A 0302. But for background due to same message i.e (Field BSEG-DMBTR does exist in SAPMF05A 0302) session processing is failed.
                                Actually through ZProgram data being uploaded to application server. Then i am executing std. program RFBIBL00 to generate session.And when i go to SM35 & choose the just created session for background processing,then processin i failed.
                          We have recently upgraded from 4.7 to ECC 6.0. Previously RFBIBL00 program is working fine but after upgrade it is not working.
               Please give your valuable suggession.
Regards,
S C Patil.

How are you related to this almost identical problem?
Field BSEG-DMBTR. does not exist in the screen SAPMF05A 0302
Thomas

Error Message: Unable to Connect to Background Process........ HELP!!

When I try to compress a FCP file from FCP version 5.1.4 i get an error message in Compressor Version 2.3.1: *Unable to Connect to Background Process*. I usually work on my G5 but I am on location and have been editing on my Laptop; Powerbook G4 1.25 GHz, with 1.25 gigs of RAM, 80GB Internal. Externals LA CIE 1TB & LA CIE 120GB Firewire external, running OSX 10.5.
Any suggestions???
Model Name: PowerBook G4 15"
Model Identifier: PowerBook5,2
Processor Name: PowerPC G4 (1.1)
Processor Speed: 1.25 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 1.25 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.7.1f1

Moving this discussion to the Help with using Adobe Muse CC forum.

Compressor error message "Unable to connect to background process"

My compressor application became corrupted and showed 2220 hours to convert a FCP file of 65 min to a 90 min mpeg2. After re-installing Compressor every time I try to submit a file I get the error message "Unable to connect to background process"? I tried resetting the background as instructed in the manual but continue to get the same message?
Anybody ever encountered this problem?

Ya I am also getting the same problem I asked here on forum.
some solution is here
http://www.kashum.com/rbf.pl?c=blog&i=1152611689&referer=r
on this link
http://support.apple.com/kb/TA47672?viewlocale=en_US
but they have not worked for me.

Error in File....request could not be submitted for background processing

Hi
We get this error when generating a pdf using crystal reports in .NET. This error doesnot occur when we run the report individually. It occurs when we have multiple users accessing the report simultaneously...
e.g of the error that gets logged...
Error in File C:\WINNT\TEMP\TransactionPDF_rpt {6F6E2A6B-9498-470D-BA4A-8F16E333C232}.rpt:
The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
We have checked the report formats, access to folders, etc. looks fine...
Any help appreciated.

See if [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33] article will help:
Ludek

Dreaded "Unable to connect to background process" error

Re: Compressor 2.0.1
A year ago I used Compressor regularly without issue. Now I get this stupid, "Unable to connect to background process" and Compressor is completely unusable.
I have read article 93234 and followed the instructions *TO THE LETTER* for Compressor 2. Still no change...same stupid message and Compressor refuses to work. I don't have anitvirus software or background disk utilities either.
I find it incredible that Apple hasn't issued an update to fix this. This is supposed to be their professional software...not some Windows crap.
Has anyone discovered what the real problem is...and how to fix this?

David Harbsmeier wrote:>So that leaves the probability that it is an issue with your system. It may be time for a clean install.
A point well taken, which I will investigate and try some basic maintenance first. My Leopard install was completely squeaky clean only about 9 months ago. Doing this again would be very time consuming.
I did try something else: I rebooted from a backup clone of my previous 10.4.11 system. And as I remembered, Compressor works flawlessly there! This at least gives me an option for using it at the moment.
Nonetheless, it must be noted this error is at the top of the list when entering Apple's Compressor support page. This suggests there is a genuine issue going on that many people are encountering. And it must be a LOT of people too... The fact that a third party "fix" utility was written seems to testify to this.
In light of my experience above, is anyone successfully running *Compressor 2.0.1 in Leopard?* If there is indeed a compatibility issue with this new OS, doing a complete system reinstall may be a complete waste of time. At least I still have the option of booting to my old system where it can be used for the present.

Error in bdc (Background processing not possible for material)

Background processing not possible for material with serial number reqmt
Message no. M7419
Diagnosis
You tried to enter the count for a material managed with serial numbers using background processing. This function is not supported.
Procedure
Use the transaction 'Enter inventory count' (MI04) to enter the count for materials managed with serial numbers.

Can You Run this BDC in Foreground Mode
I am doubtfull for that.
please check
Gaurav Sood

Error in GUI_DOWNLOAD in background processing

Similar Messages

Maybe you are looking for