ERROR IN IAS 3.1 INSTALLATION - DEPLOYING IAS APPLICATION

Good Morning,
I write because I am installing versión 3.1 of Endeca and it has arisen a problem installing the IAS.
The problem is when the installer begin to deploy the "ias.war" file.
This is the message:
Deploying IAS application in the domain.
Failed to install IAS. Please see log C:\Oracle\Endeca\IAS\3.1.0\logs\ias-install.log for details. Configuration will exit.
Stopping IAS domain because of installation failure.
Thank you!

<23-nov-2013 17H33' CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<23-nov-2013 17H33' CET> <Notice> <WebLogicServer> <BEA-000360> Server started in RUNNING mode>
   (ConsoleProcess)
13-11-23 17:33:54 INFO Deploying IAS application in the domain. (IasWebLogicInstaller)
13-11-23 17:34:08 INFO Process [c:\Oracle\Endeca\IAS\3.1.0\java\bin\java.exe] output:weblogic.Deployer invoked with options:
-adminurl t3://localhost:8401 -user weblogic_ias -name iasServer -deploy -source c:\Oracle\Endeca\IAS\3.1.0\webapps\weblogic\ias.war
<23-nov-2013 17H34' CET> <Info> <J2EE Deployment SPI> <BEA-260121> Initiating deploy operation for application, iasServer [archive: c:\Oracle\Endeca\IAS\3.1.0\webapps\weblogic\ias.war], to configure targets.>
Task 0 initiated: [Deployer:149026] deploy application iasServer on AdminServer.
Task 0 failed: [Deployer:149026] deploy application iasServer on AdminServer. Target state: deploy failed on Server AdminServerjava.lang.ClassCastException: weblogic.wsee.jaxws.spi.WLSEndpoint cannot be cast to org.apache.cxf.jaxws.EndpointImpl (ConsoleProcess)
13-11-23 17:34:08 ERROR Failed to Install IAS. (InstallIas)
com.endeca.ias.process.InstallFailureException: Failed to deploy IAS application.
   at com.endeca.ias.installer.IasWeblogic.Installer.deployIasWar(IasWeblogicInstaller.java:307)
   at com.endeca.ias.installer.IasWeblogicInstaller.install(IasWeblogicInstaller.java:97)
   at com.endeca.ias.installer.InstallIas.main(InstallIas.java:60)
Caused by: com.endeca.ias.proces.InstallFailureException: Command not finished as expected
   at com.endeca.ias.process.ConsoleProcess.expect(ConsoleProcess.java:118)
   at com.endeca.ias.installer.IasWeblogicInstaller.deployIasWar(IasWeblogicInstaller.java:305)
   ... 2 more
13-11-23 17:34:08 INFO Stopping IAS domain because of installation failure. (IasWeblogicInstaller)
13-11-23 17:34:08 INFO [C:\Oracle\Middleware\user_projects\domains\ias\bin\stopWebLogic.cmd]: starting... (ConsoleProcess)
13-11-23 17:34:38 INFO Stopping Weblogic Server...
Initializing WebLogic Scripting Tool (WLST) ...
Jython scans all the jar files it can find at first startup. Depending on the system, this process may take a few minutes to complete, and WLST may not retunr a prompt right away.
Welcome to Weblogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://localhost:8401 with userid weblogic_ias ...
Succesfully connected to Admin Server 'AdminServer' that belongs to domain 'ias'.
Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be usea instead.
Shutting down the server AdminServer with force=false while connected to AdminServer ...
Disconnected from weblogic server: AdminServer
Exiting WebLogic Scripting Tool.
Done
Stopping Derby Server ...
   (ConsoleProcess)

Similar Messages

  • Getting Error Code:26282 when trying to deploy TestStand Application?

    Getting Error Code:26282 TestStand - Deployment Utility Splash Screen.vi >> TestStand - Distribution Wizard GUI.vi >> TestStand - Build.vi >> TestStand - Create Installer.vi >> TestStand - Set NI Paths Entries.vi >> MSI DK Add Entry to NIPaths Requested.vi

    My problem is that when I installed TS on this computer, The redistributable Engine Components part failed and I selectected to continue. I have uninstalled all of the NI software and deleted the c:\Program Files\National Instruments\ folder. Re-installed LAbview 7.0 and then re-installed Testand 3.0 in that order. The same error occurred "corrupt or damaged Cabs.w1.cab file" during part 4 of install. The error was #1335. I looked in the redist folder and 24 msm files had been installed at the time of the error. When the program continued it reported that error #2350 had occurred. Yesterday I tried to add the redist files from a Demo CD and got the same results.
    Thanks
    Steve

  • Getting errors on EP7.0CE NWDS while deploying the Application

    Hi Frndz..
    Jus now i installed EP7.0 CE SP3 n NWDS7.0CE , for deploying the app from NWDS i did the same thing like
    windows--> preferences -->SAP AS JAVA n their i given the host name n Instance number...
    but when am trying to deploy applicatio itz giving the following error
    com.sap.ide.eclipse.deployer.api.APIException: ConnectionException,cause=[ERROR CODE DPL.DCAPI.1144] NamingException.Cannot get initial context.
    Reason: Exception while trying to get InitialContext.
    [#1]: SessionImpl::getContext():[get ctx. NamingException],cause=Exception while trying to get InitialContext.
    com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
    *sap-001:50006 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 10.6.3.112*
    Am xpecting a needfull information,thanx in adavance
    Regards
    Rajesh

    Hi,
    normally it should not be required to deploy JSF 1.2 with the application as WLS has JSF 1.2 installed. So only make sure you deploy 11.1.1.7 to the WLS server it is supported with
    Frank

  • Error while deploying an application on weblogic 12c. An error occurred while reading the deployment descriptor. The error was: Error processing annotations

    Anyone please help me solve this error. I am trying to deploy an application on weblogic 12c  i am getting an error but the same application gets successfully deployed on weblogic 11g. The error is
    An error occurred during activation of changes, please see the log for details.
    Exception preparing module: EJBModule(gsCallbackAdapterLGTX-ejb.jar) An error occurred while reading the deployment descriptor. The error was: Error processing annotations: .
    [EJB:015001]Unable to link class com.aep.gridsmart.adapters.lgtx.buslogic.deliver.xform.AdapterTransfomerDeliverSession in Jar /appl/oracle/middleware/WLS/12.1.1.0/user_projects/domains/Gridsmart/servers/ManagedServer1/tmp/_WL_user/gsCallbackAdapterLGTX/34vz4d/gsCallbackAdapterLGTX-ejb.jar : java.lang.NoClassDefFoundError: com/aep/gridsmart/adapter/deliver/CommonAdapterDeliverBean

    Cotton please let me know what is the mistake i am
    doingThe following path does not exist.
    C:\Sun\AppServer7\domains\domain1\server1\
    applications\j2ee-modules\task_1\WEB-INF\web.xml

  • Attempting to deploy an application on iAS 6.0 sp3 on solaris using the iASDT; CLASSPATH and GUID question.

    When I attempted to use iasdeploy deploymodule, it copied the file to <iAS install>/ias/JAR directory. But if I try and jar tvf test.war, the jar throws an exception. It looks like the file gets corrupted. Any suggestions?
    So a began to use the iASDT tool to assemble and deploy a webapp (war) on solaris. Everytime I add a jar it says that there are external dependencies. I think thier may be some type of name collision on the CLASSPATH. I am attempting to include:
    jaxp.jar, xerces.jar, log4j.jar, jaxp.jar, jaas.jar, and some other jars. I think the classes in these files may be on the CLASSPATH already. Is there a way to see the classpath of the server? I have looked in the registry under ApplicationServer/6.0/...but there doesn't seem to be a java entry. I looked inside the kjs script and that really doesn't indicate anything either. I saw the directories /opt/iplanet/ias6/ias/classes/java and /opt/iplanet/ias6/ias/java/jars contain jar files. Are these on the classpath? Is there any documentation of the origins and versions of things that are on the classpath (xerces.jar, xalan.jar, ldapjdk.jar, etc.)
    Additionally, I thought all I really needed was to get a guid to put it into the ias DD xml files, but when I launch ./kguidgen I get the following response:
    guidgen: Could not get arp for <hostname>
    guidgen: Could not get arp for <hostname>
    Several attempts to create GUID failed
    Any ideas on this one I am stumped?

    Hi,
    Please correct me if I'm wrong in understanding your problem. You have a test.war file and you are trying to add a .jar file to it and deploy the application (using command line & GUI tool), and this is where you have a trouble of external dependencies. So you think that this is a problem of GUID, so you are trying to obtain a GUID number manually, but the utility throws "Could not get arp..." error.
    If this is the problem, then let us check first, if the application server is registered using the iASAT. Next, please give a try of deploying the .jar file initally & try to access it, then, undeploy the .jar file and deploy the .war file and access it. Next, remove the .war file and try to build a .ear file using both the .war & .ear files. Please let me know if this helps for me to investigate further on this.
    Regards
    Raj

  • Error while deploying an application on Weblogic 10.3 Application Server

    Hi All,
    i have installed latest weblogic 10.3 Application server.
    - installation of Weblogic was successful.
    - tried to deploy my application but it failed to do so during that point of time and throw an exception:-
    !MESSAGE [javax.management.RuntimeMBeanException: java.lang.RuntimeException: weblogic.management.provider.EditSaveChangesFailedException: Can not save changes while prepare changes are still in progress.
    - then i tried tyo install my appliction's .ear file manually from weblogic console then i get the different exception:-
    Unable to access the selected application.
    Exception in AppMerge flows' progression
    Exception in AppMerge flows' progression
    VALIDATION PROBLEMS WERE FOUND problem: cvc-id.2: Duplicate ID value 'MessageDriven_1044495979312':<null> problem: cvc-id.2: Duplicate ID value 'MessageDriven_1044495979312':<null> problem: cvc-id.2: Duplicate ID value 'MessageDriven_1044495979312':<null> problem: cvc-id.2: Duplicate ID value
    - my application has server and console, when i tried to install only console, i was lucky to deploy the console, but not the server.
    Any body having any idea regarding these exceptions, what should i do to overcome these errors.
    Please shred some light and suggest some pointers to this issue.
    Regards
    Avninder.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    We are not using Anotations as we are on EJB 2, we use Deployment Descriptors.
    I have investigated and find out that in ejb-jar.xml there is one tag <acknowledge-mode>
    in my ejb-jar.xml we have 7 MD beans, this tag is mentioned only in enactment bean and email dispatcher bean. For these 2 beans i am getting conflict, so i removed <acknowledge-mode> tag from these 2 beans and create the .ear again and deploy.
    i was succeed in this.
    As per my understanding Weblogic 10.3 is using ejb 3.0 and its xsd is different from ejb 2.0 xsd, so if i remove these tags from my ejb-jar.xml beans then in future i'll not be able to deploy it on weblogic 9.2.
    i think weblogic has not provide the backward compatibility, Weblogic has to support the structure as many applications using WL 9.2.
    Below is the sample of my ejb-jar.xml where these tags differ
    <message-driven id="MessageDriven_1044495979312">
                   <display-name>EmailDispatcher</display-name>
                   <ejb-name>EmailDispatcher</ejb-name>
                   <ejb-class>com.fujitsu.iflow.serveree.impl.globalnotification.EmailDispatcherMB</ejb-class>
                   <transaction-type>Bean</transaction-type>
                   <acknowledge-mode>Auto-acknowledge</acknowledge-mode>
                   <message-driven-destination id="MessageDrivenDestination_1044498867079">
                        <destination-type>javax.jms.Topic</destination-type>
                        <subscription-durability>NonDurable</subscription-durability>
                   </message-driven-destination>
              </message-driven>
              <message-driven id="MessageDriven_1044495979297">
                   <display-name>Enactment</display-name>
                   <ejb-name>Enactment</ejb-name>
                   <ejb-class>com.fujitsu.iflow.serveree.impl.wfengine.EnactmentMB</ejb-class>
                   <transaction-type>Bean</transaction-type>
                   <acknowledge-mode>Auto-acknowledge</acknowledge-mode>
                   <message-driven-destination id="MessageDrivenDestination_1044498867078">
                        <destination-type>javax.jms.Topic</destination-type>
                        <subscription-durability>NonDurable</subscription-durability>
                   </message-driven-destination>
              </message-driven>
              <message-driven id="MessageDriven_1063157666983">
                   <display-name>JmsEnactor</display-name>
                   <ejb-name>JmsEnactor</ejb-name>
                   <ejb-class>com.fujitsu.iflow.connectorsee.msgconnector.JmsEnactmentMB</ejb-class>
                   <transaction-type>Bean</transaction-type>
                   <message-driven-destination>
                        <destination-type>javax.jms.Topic</destination-type>
                   </message-driven-destination>
              </message-driven>
              <message-driven id="MessageDriven_1063157666982">
                   <display-name>SmsConnector</display-name>
                   <ejb-name>SmsConnector</ejb-name>
                   <ejb-class>com.fujitsu.iflow.connectorsee.smsconnector.SmsConnectorMB</ejb-class>
                   <transaction-type>Bean</transaction-type>
                   <message-driven-destination>
                        <destination-type>javax.jms.Topic</destination-type>
                   </message-driven-destination>
              </message-driven>
    Kindly help me out.
    Suggest is there any workaround so that i can use my application in both the versions.
    cheers :)

  • Error while deploying new application

    Hello All,
    I have created a webdynpro application and deployed on the server using upload archive transaction.
    I can see the MCD in NWA and corresponding dependencies, but when i deploy the application  i am getting the following message in trace file of my client.Also in NWA its giving message as deployment failed 'error in installation'.
    __Line: -__
    __r id="1274362229898" t="19:00:29" d="2010-05-20" s="D" c="000" u="" g="" m="Processing confirmation for last change of MBO node [Class[DEPLOYMENT_STATUS$DEPLOYMENT_STATUS/DeploymentStatus, CRUD, root UD, SYNCHRONIZED]] with key [005056A176071DEF99826FF4E9B56430].">+__
    __f n="LocationName" v=" (com.sap.tc.mobile.cfs.mbosync.InboundProcessor:processConfirmation)"/>+__
    __f n="ThreadName" v="Thread-12"/>+__
    __r>__
    __r id="1274362229899" t="19:00:29" d="2010-05-20" s="D" c="000" u="" g="" m="UPDATE M5DEPLOYMENT_STATUS SET &quot;STATUS&quot;=&apos;E&apos;,&quot;TEXT&quot;=&apos;Unrecoverable error during deploy.Please redeploy&apos;,&quot;STATEID&quot;=&apos;005056A176071DEF99827A9591258430&apos;,&quot;SYNCSTATE&quot;=0 WHERE &quot;SYNCKEY&quot;=&apos;005056A176071DEF99826FF4E9B56430&apos; NOWAIT">+__
    __f n="SourceName" v=" [/CFS/PERSIST/JDBC/SQL]"/>__
    __f n="LocationName" v=" (com.sap.tc.mobile.cfs.pers.jdbc.core.JDBCPersistenceSink:executeRawUpdate)"/>++<f n="ThreadName" v="Thread-12"/>__
    __r id="1274362104695" t="18:58:24" d="2010-05-20" s="D" c="000" u="" g="" m="Processing confirmation for last change of MBO node [Class[DEPLOYMENT_STATUS$DEPLOYMENT_STATUS/DeploymentStatus, CRUD, root UD, SYNCHRONIZED]] with key [005056A176071DEF99826FF4E9B56430].">+__
    __f n="LocationName" v=" (com.sap.tc.mobile.cfs.mbosync.InboundProcessor:processConfirmation)"/>+__
    __f n="ThreadName" v="Thread-10"/>+__
    __/r>+__
    __r id="1274362104696" t="18:58:24" d="2010-05-20" s="D" c="000" u="" g="" m="UPDATE M5DEPLOYMENT_STATUS SET &quot;STATUS&quot;=&apos;E&apos;,&quot;TEXT&quot;=&apos;Unrecoverable error during deploy.Please redeploy&apos;,&quot;STATEID&quot;=&apos;005056A176071DEF998271EC462EC430&apos;,&quot;SYNCSTATE&quot;=0 WHERE &quot;SYNCKEY&quot;=&apos;005056A176071DEF99826FF4E9B56430&apos; NOWAIT">+__
    __f n="SourceName" v=" [/CFS/PERSIST/JDBC/SQL]"/>+__
    __f n="LocationName" v=" (com.sap.tc.mobile.cfs.pers.jdbc.core.JDBCPersistenceSink:executeRawUpdate)"/>+__
    __f n="ThreadName" v="Thread-10"/>+__
    __/r>+__
    __r id="1274362104697" t="18:58:24" d="2010-05-20" s="D" c="000" u="" g="" m="InboundConfirmation processor processed essage of type E7D6128BBD37FF4FB0101079DFF5DC5A with action U successfully. ">+__
    __f n="LocationName" v=" (com.sap.tc.mobile.cfs.mbosync.InboundProcessor:execute)"/>+__
    __f n="ThreadName" v="Thread-10"/>+__
    __/r>+__
    __r id="1274362104698" t="18:58:24" d="2010-05-20" s="D" c="000" u="" g="" m="Processed Confirmation of type ClassDEPLOYMENT_STATUS$DEPLOYMENT_STATUS/DeploymentStatus, CRUD, root UD, SYNCHRONIZED] with key 00000000000000000000000000000000">+__
    __f n="LocationName" v=" (com.sap.tc.mobile.cfs.mbosync.InboundProcessor:InboundConfirationProcessor)"/>+__
    __f n="ThreadName" v="Thread-10"/>+__
    __/r>+__
    __r id="1274362104699" t="18:58:24" d="2010-05-20" s="D" c="000" u="" g="" m="Dumping MBO inbound message 67:+__
    __&lt;?xml version=&quot;1.0&quot; encoding=&quot;utf-8&quot;?&gt;&lt;Msg type=&quot;C&quot; id=&quot;266&quot;&gt;&lt;DEPLOYMENT_STATUS C5=&quot;E&quot; C0=&quot;005056A176071DEF99826FF4E9B56430&quot; C8=&quot;Unrecoverable error during deploy.Please redeploy&quot; ty=&quot;U&quot; tv=&quot;005056A176071DEF998271EC462EC430&quot;/&gt;&lt;/Msg&gt;">__
    __f n="LocationName" v=" (com.sap.tc.mobile.cfs.mbosync.MBOInboundMessageProcessor:Inbound message)"/>+__
    __f n="ThreadName" v="Thread-10"/>+__
    __/r>+__
    __r id="1274362104700" t="18:58:24" d="2010-05-20" s="D" c="000" u="" g="" m="Locking OID 43000018 for delete">+__
    __f n="SourceName" v=" [/MI/ObjectCache/PersMan/Lock]"/>+__
    __f n="LocationName" v=" (com.sap.tc.mobile.cfs.pers.cache.DefaultPersistenceManager:)"/>+__
    __f n="ThreadName" v="Thread-10"/>+__
    __/r>+__
    __r id="1274362104701" t="18:58:24" d="2010-05-20" s="D" c="000" u="" g="" m="Locking OID 9300000b for delete">+__
    __f n="SourceName" v=" [/MI/ObjectCache/PersMan/Lock]"/>+__
    __f n="LocationName" v=" (com.sap.tc.mobile.cfs.pers.cache.DefaultPersistenceManager:)"/>+__
    __f n="ThreadName" v="Thread-10"/>+__
    __/r>+__
    __r id="1274362104702" t="18:58:24" d="2010-05-20" s="D" c="000" u="" g="" m="DELETE FROM M11JDBCBLOB WHERE uot;pers_ref_id&quot;=2466250763 NOWAIT">+__
    __f n="SourceName" v=" [/CFS/PERSIST/JDBC/SQL]"/>+__
    __f n="LocationName" v=" (com.sap.tc.mobile.cfs.pers.jdbc.core.JDBCPersistenceSink:executeUpdate)"/>+__
    __f n="ThreadName" v="Thread-10"/>+__
    __/r__
    __Line: -__
    Thanks & Regards
    Devendra

    resintalled server

  • Error while building the DC and deploying it.

    Hi,
    I have done all the while Post Installation Steps of Usage Type DI.
    The SAP Link followed was :
    http://help.sap.com/saphelp_nw2004s/helpdata/en/45/68d64260752a78e10000000a155106/frameset.htm
    This is first time, I am configuring SAP NEWDI.
    The server installed is: sap.com/SAP-JEECOR  7.01 SP4 (1000.7.01.4.0.20090417015900
    which looks SAP NetWeaver 7.0 EHP1 SP4.
    The DB installed is: DB2/NT64 (SQL09050)
    The Java Virtual Machine details in the server is:
    VM  system properties... 
    Name:  Java HotSpot(TM) 64-Bit Server VM 
    Vendor:  Sun Microsystems Inc. 
    Version:  1.4.2_21-b03 
    Now, I also installed SAP NWDS 7.01.04 which is SAP NWDS 7.0 EHP1 SP4, I think.
    I did some mistakes while doing Post DI Steps.
    The track and sc can be successfully imported to SAP NWDS
    and I am able to build dcs on that sc.
    Now, while doing the step build from Java WebDynpro perspective,
    I am getting the build error.
    I am pasting the errors.
    Kind     Status     Priority     Description     Resource     In Folder     Location
    Warning               [Warning]: Path in Classpath for file webdynproadmin.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Path in Classpath for file webdynproclientserver.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Path in Classpath for file webdynpromodel_dynamicrfc.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Path in Classpath for file webdynpromodelimpl.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Path in Classpath for file webdynproprogmodel.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Path in Classpath for file webdynproruntime_designtime_coupling_api.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Path in Classpath for file webdynproruntime_designtime_coupling.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Path in Classpath for file webdynproruntime_repository_pmr.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Path in Classpath for file webdynproruntime_repository.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Path in Classpath for file webdynproservices.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Path in Classpath for file SapDictionaryTypeServices.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Path in Classpath for file SapDictionaryTypesRuntime.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Path in Classpath for file SapMetamodelWebdynproContent.zip not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Version for file webdynproadmin.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Version for file webdynproclientserver.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Version for file webdynpromodel_dynamicrfc.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Version for file webdynpromodelimpl.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Version for file webdynproprogmodel.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Version for file webdynproruntime_designtime_coupling_api.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Version for file webdynproruntime_designtime_coupling.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Version for file webdynproruntime_repository_pmr.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Version for file webdynproruntime_repository.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Version for file webdynproservices.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Version for file SapDictionaryTypeServices.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Version for file SapDictionaryTypesRuntime.jar not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Warning               [Warning]: Version for file SapMetamodelWebdynproContent.zip not found.     DJ1_DEV_Dhometestarpita~sap.com          
    Error               com.sap cannot be resolved (or is not a valid type) for the field TestApplArpita.logger     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 29
    Error               com.sap cannot be resolved     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 30
    Error               com.sap cannot be resolved     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 37
    Error               com.sap cannot be resolved (or is not a valid type) for the field TestApplArpita.wdControllerAPI     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 72
    Error               com.sap cannot be resolved (or is not a valid type) for the field TestApplArpita.wdComponentAPI     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 81
    Error               wdControllerAPI cannot be resolved or is not a field     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 87
    Error               The method wdGetAPI() is undefined for the type IPrivateTestApplArpita     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 87
    Error               wdComponentAPI cannot be resolved or is not a field     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 88
    Error               The method wdGetAPI() is undefined for the type IPrivateTestApplArpita     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 88
    Error               Location cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 25
    Error               com.sap cannot be resolved (or is not a valid type) for the field InternalTestApplArpitaInterfaceView.wdAlterEgo     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 30
    Error               IWDNode cannot be resolved (or is not a valid return type) for the method wdGetRootNode     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 41
    Error               IWDAction cannot be resolved (or is not a valid return type) for the method wdCreateAction     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 51
    Error               wdAlterEgo cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 52
    Error               IWDAction cannot be resolved (or is not a valid return type) for the method wdCreateNamedAction     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 61
    Error               wdAlterEgo cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 62
    Error               com.sap cannot be resolved (or is not a valid type) for the argument alterEgo of the method InternalTestApplArpitaInterfaceView     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 70
    Error               com.sap cannot be resolved (or is not a valid return type) for the method wdGetAPI     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 78
    Error               com.sap cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 79
    Error               wdAlterEgo cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 79
    Error               logger cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 86
    Error               logger cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 87
    Error               logger cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 94
    Info               TextView DefaultTextView: UIElement does not have a label     TestApplArpitaView.wdview     DJ1_DEV_Dhometestarpita~sap.com/src/packages/com/vmp/wdp     
    After that it is possible to successfully deploy the application after that,
    but while running the application, I am getting runtime error.
    500   Internal Server Error
    SAP NetWeaver Application Server 7.00/Java AS 7.00 
    Failed to process request. Please contact your system administrator.
    Root Cause
    The initial exception that caused the request to fail, was:
       com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create delegate for com.vmp.appl.Test_dev_comp: no suitable constructor. (Hint: Does the generation version match the runtime version?)
        at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:103)
        at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:51)
        at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:382)
        at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
        at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
        ... 23 more   
    Detailed Error Information
    Detailed Exception Chain
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create delegate for com.vmp.appl.Test_dev_comp: no suitable constructor. (Hint: Does the generation version match the runtime version?)
         at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:103)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:51)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:382)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Now some points I need to tell about the NWDI:
    In the , Post Installation Steps of Usage Type DI:
    I need some points to be clarified in:
    Preparing the System Landscape Directory.
    1. Activate the SLD Server
    While doing this step,
          1.      Open the SLD Web UI under the URL http://<server>:<port>/sld.
           2.      Open the initial page of the SLD Web UI and log on as an administrator.
           3.      On the initial page, choose Administration and in the section Server u00AE Profile.
    The system displays the Parameters screen.
           4.      ChooseSection u00AEServer Settings.
           5.      Enter a reserved SAP NetWeaver namespace in the input field Object Server. Keep the preset working directory in the input field Working Directory. Select the values for persistency and write protection. Save your entries.
    The object server name was localhost. I think this needed to be changed to the FQDN
    of the server were the J2EE Engine is running say hclprd09.hcltech.com (or it would be the SID of the J2EE Server, that is DJ1).
    The other values are now set to:
    Persistence Type: Database
    Working Directory: E:\usr\sap\DJ1\SYS\global\sld
    Write Protection: None
    Then the next step is:
    Import the SAP Master Component Information.
      1.      On the SLD initial page, choose Administration and in the section Content u00AE Import.
           2.      Choose Import CR Content (this switch appears only before the content import has been executed once. By default, this is a step during installation).
    The SLD server starts the import of the SAP Master Component Information. This process can take some time.
    For this we have to use the file:
    F:\usr\sap\DJ1\SYS\global\sld\model\CR_Content.zip
    Is this step mandatory?
    If I do the step will I have to recreate the users, roles, worksets and iviews again.
    As some developments are already there.
    So, importing the CR_Content.zip will overwrite or destroy all those roles, iviews etc.
    Now, also in giving the name prefix for the development component for user kaba
    has been given by me as sap.com.*
    I think this is wrong as the DC is produced by my company and not by SAP.
    Then I followed all other steps as written.
    Give me your suggestions where I might be wrong.
    Regards
    Kaushik

    Hi Neha,
    Yes, till now; you are right.
    The Product and sc has been created in
    http://<host name>:<port>/devinf
    The steps followed are written below:
    1> Now Click on System Landscape Directory and create Product.
    2> After entering Name, Vendor and Version for Product. Click on Create..
    3> Product is created now it will ask for name of Software Unit.
    4> Specify name and click on Create.
    S/w Unit is created now it will ask inputs for S/w Components.
    Provide all the necessary inputs for S/w Components and keep Production State as released.
    Click on create.
    Now select your Software Component and click on the Dependencies tab in the lower half of screen.
    Select Build Time as Context and click on Define Prerequisite Software Components Versions
    Now on next page search for three basic dependencies those are.
    SAP J2EE ENGINE 7.00
    DI BUILD TOOL 7.00
    SAP JAVA TECH SERVICES 7.00
    This is screen shot for SAP JAVA TECH SERVICES 7.00
    Repeat the same process for the other two steps also search word will be *DI* for DI BUILD TOOL 7.0
    *SAP J2e* for SAP JAVA TECH SERVICES 7.00
    Domain Configuration and Track Creation
    Now navigate to Landscape Configurator and click on Domain Data.
    Enter all the required inputs in the screen below Click on Save and Update CMS.
    Update CMS is very important step do not forget it.
    Now click on Track Data and click on New.
    Enter all the required inputs in the screen below
    On the next page, search for your Software Component and click on ADD.
    Click on Runtime Tab on the Top and Select System as per your requirement.
    Enter the required Inputs and click on Save.
    Now click on Transport Studio on top and select Check In now select all three Dependencies and click on Check In Button.
    Now Click on Development Tab on top and Select All 3 Dependencies and Click on Import
    Look at the status now it should say Import finished.
    Your track is now created, configured & ready to use for development component in NWDS.
    But mistake,
    I should have added
    SAP J2EE ENGINE 7.00
    DI BUILD TOOL 7.00
    SAP JAVA TECH SERVICES 7.00
    Also, I removed prequisite software dependicies from SAP J2EE ENGINE.
    Now what to do?
    Do I need to import CIM Model Data?
    Would it help?
    Regards
    Kaushik

  • Error in Jdeveloper 10g in Remote deployment : Help Needed ASAP

    Hi,
    Am trying to deploy the simple application to remote oracle IAS server from Jdeveloper 10g. It is not allowing me to deploy any application remotely. The deployment log window shows following message:
    Target platform is Oracle9i Application Server (AppServerConnection1).
    Wrote WAR file to C:\jdev10g\jdev\mywork\Business Insight\Project1\deploy\webapp1.war
    Wrote EAR file to C:\jdev10g\jdev\mywork\Business Insight\Project1\deploy\webapp1.ear
    Invoking DCM servlet client...
    C:\jdev10g\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\jdev10g\jdev\lib\oc4j_remote_deploy.jar http://as18schgefage:1811/Oc4jDcmServletAPI/ ias_admin **** redeploy /home/ias/unified C:\jdev10g\jdev\mywork\Business Insight\Project1\deploy\webapp1.ear webapp1 home
    Initializing log
    Servlet interface for OC4J DCM commands
    Command timeout defined at 600 seconds
    Executing DCM command...
    Executing command redeploy /home/ias/unified C:\jdev10g\jdev\mywork\Business Insight\Project1\deploy\webapp1.ear webapp1 home
    Command = INVALID_COMMAND
    #### Invalid command: redeploy /home/ias/unified C:\jdev10g\jdev\mywork\Business Insight\Project1\deploy\webapp1.ear webapp1 home
    Opening connection to Oc4jDcmServlet
    Setting userName to ias_admin
    Sending command to DCM servlet
    #### Could not send command to Oc4jDcmServlet
    Closing connection to Oc4jDcmServlet
    #### DCM command did not complete successfully (-6)
    #### HTTP return code was -6
    Exit status of DCM servlet client: -6
    Elapsed time for deployment: 4 seconds
    #### Deployment incomplete. #### Mar 16, 2005 9:20:03 AM
    Please help asap.
    Regards,
    Ujwala

    1. Re-test your connection from JDev to AS and it must success.
    I suggest to create a new OC4J instance on AS and fill
    the instance name on the dialog window while
    creating AS Connection on JDev. i.e OC4J instance name (optional)
    2. For JDev 9.0.5.x/10.1.2 using AS 9.0.4,
    don't forget to install ADF Runtime Libraries on AS.
    3. Make sure your AS support JDK/J2SE version as in JDev.
    JDev 10.1.2 need AS to use JDK version 1.4.2_04-b05.
    You can download it from http://java.sun.com/products/archive/j2se/1.4.2_04/index.html
    and install it.
    To cek your ORACLE_HOME/jdk/bin/java -fullversion
    Regs,
    Ferry Situmorang

  • Error while deploying ADF application to a standalone weblogic server

    I am using Jdeveloper 11.1.1.6.0, and I am trying to deploy my application to a standalone server running on a Unix box and I get the following error message:
    [04:12:44 PM] ---- Deployment started. ----
    [04:12:44 PM] Target platform is (Weblogic 10.3).
    [04:13:00 PM] Retrieving existing application information
    [04:13:01 PM] Running dependency analysis...
    [04:13:01 PM] Building...
    [04:13:05 PM] Deploying profile...
    [04:13:09 PM] Wrote Web Application Module to C:\JDeveloper\PortingAppln\ViewController\deploy\ADF1.war
    [04:13:13 PM] Deploying Application...
    [04:20:19 PM] [Deployer:149191]Operation 'deploy' on application 'ADF1' is initializing on 'ADF1'
    [04:20:45 PM] Weblogic Server Exception: weblogic.application.WrappedDeploymentException: oracle/jrf/PortabilityLayerException
    [04:20:45 PM] See server logs or server console for more details.
    [04:20:45 PM] weblogic.application.WrappedDeploymentException: oracle/jrf/PortabilityLayerException
    [04:20:46 PM] #### Deployment incomplete. ####
    [04:20:46 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
    Can someone help me with this problem.
    Thanks,
    Srini.

    Well, how did you do?
    I am having a similar problem.
    1) Installed WLS 10.3.5 on a Linux machine
    2) Installed ADF runtime libraries (ofm_appdev_generic_11.1.1.5.0_disk1_1of1.zip)
    3) I can see at deployments
    - adf.oracle.businesseditor(1.0,11.1.1.2.0)
    - adf.oracle.domain(1.0,11.1.1.2.0)
    - adf.oracle.domain.webapp(1.0,11.1.1.2.0)
    - DMS Application (11.1.1.1.0)
    - em
    - emai
    - emas
    - emcore
    - FMW Welcome Page Application (11.1.0.0.0)
    - jsf(1.2,1.2.9.0)
    I created from scratch a new Fusion Web app. It just has 1 ADF read-only table based on the HR.COUNTRIES table. It runs perfectly on the integrated WL.
    I cannot deploy it to my standalone WLS. The error:
    [02:01:37 PM] Unable to determine the target platform from the Profile. Using default
    [02:01:37 PM] ---- Deployment started. ----
    [02:01:37 PM] Target platform is (Weblogic 10.3).
    [02:01:37 PM] Retrieving existing application information
    [02:01:37 PM] Running dependency analysis...
    [02:01:37 PM] Building...
    [02:01:37 PM] Deploying 2 profiles...
    [02:01:37 PM] Wrote Web Application Module to C:\JDeveloper\mywork\TesteAPP\ViewController\deploy\TesteAPP_ViewController_webapp.war
    [02:01:37 PM] Wrote Enterprise Application Module to C:\JDeveloper\mywork\TesteAPP\deploy\TesteAPP_Project1_TesteAPP.ear
    [02:01:37 PM] Deploying Application...
    [02:01:39 PM] [Deployer:149191]Operation 'deploy' on application 'TesteAPP_Project1_TesteAPP' is initializing on 'ADFServer'
    [02:01:39 PM] [Deployer:149193]Operation 'deploy' on application 'TesteAPP_Project1_TesteAPP' has failed on 'ADFServer'
    [02:01:39 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application TesteAPP_Project1_TesteAPP on ADFServer.: Failed to load webapp: 'testeADF'.
    [02:01:39 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'testeADF'
    [02:01:39 PM] Caused by: weblogic.management.DeploymentException: Error: Unresolved Webapp Library references for "ServletContext@1021039597[app:TesteAPP_Project1_TesteAPP module:testeADF path:/testeADF spec-version:2.5]", defined in weblogic.xml [Extension-Name: jsf, Specification-Version: 2, exact-match: false]
    [02:01:39 PM] See server logs or server console for more details.
    [02:01:39 PM] weblogic.application.ModuleException: Failed to load webapp: 'testeADF'
    [02:01:39 PM] Deployment cancelled.
    [02:01:39 PM] ---- Deployment incomplete ----.
    [02:01:39 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
    I am using JDeveloper 11.1.2.1.0
    What am I missing here? It must be something obvious, but I am stuck.
    Thanks in advance.

  • Error while deploying ADF application to a standalone weblogic

    jdeveloper version: 11.1.2.2
    Issue: I have built a standalone weblogic server (10.3.5.0) and am trying to deploy my ADF application to it. The deployment fails with the following message. The stand alone server I have built is on the same machine where jdeveloper is installed and I am using same weblogic that came with jdeveloper install. The aplication runs fine on integrated server. I have researched this issue and have got more or less same answer of installing ADF run time libraries. Can someone please help me with exactly what I need to install and how?
    Thanks,
    Saurabh.
    [09:49:44 AM] Unable to determine the target platform from the Profile. Using default
    [09:49:44 AM] ---- Deployment started. ----
    [09:49:44 AM] Target platform is (Weblogic 10.3).
    [09:49:55 AM] Retrieving existing application information
    [09:49:55 AM] Running dependency analysis...
    [09:49:55 AM] Building...
    [09:50:18 AM] Deploying profile...
    [09:50:20 AM] Wrote Web Application Module to C:\JDeveloper\mywork\EmployeeTrack\ViewController\deploy\EmployeeTrack_ViewController_webapp.war
    [09:50:20 AM] Deploying Application...
    [09:50:24 AM] [Deployer:149191]Operation 'deploy' on application 'EmployeeTrack_ViewController_webapp' is initializing on 'ADFServer'
    [09:50:26 AM] [Deployer:149193]Operation 'deploy' on application 'EmployeeTrack_ViewController_webapp' has failed on 'ADFServer'
    [09:50:26 AM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application EmployeeTrack_ViewController_webapp on ADFServer.: Failed to load webapp: 'EmployeeTrack_ViewController_webapp.war'.
    [09:50:26 AM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'EmployeeTrack_ViewController_webapp.war'
    [09:50:26 AM] Caused by: weblogic.management.DeploymentException: Error: Unresolved Webapp Library references for "ServletContext@29261813[app:EmployeeTrack_ViewController_webapp module:EmployeeTrack_ViewController_webapp.war path:/alonedemo spec-version:2.5]", defined in weblogic.xml [Extension-Name: adf.oracle.domain.webapp, exact-match: false], [Extension-Name: jstl, Specification-Version: 1.2, exact-match: false], [Extension-Name: jsf, Specification-Version: 2, exact-match: false]
    [09:50:26 AM] See server logs or server console for more details.
    [09:50:26 AM] weblogic.application.ModuleException: Failed to load webapp: 'EmployeeTrack_ViewController_webapp.war'
    [09:50:26 AM] Deployment cancelled.
    [09:50:26 AM] ---- Deployment incomplete ----.
    [09:50:26 AM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

    Thanks Timo.. You were right.. Those setting helped me fix the initial issue.. Now I have another issue and was wondering if you have seen this as well?
    [11:35:13 AM] Unable to determine the target platform from the Profile. Using default
    [11:35:13 AM] ---- Deployment started. ----
    [11:35:13 AM] Target platform is (Weblogic 10.3).
    [11:35:13 AM] Retrieving existing application information
    [11:35:13 AM] Running dependency analysis...
    [11:35:13 AM] Building...
    [11:35:20 AM] Deploying profile...
    [11:35:21 AM] Wrote Web Application Module to C:\JDeveloper\mywork\EmployeeTrack\ViewController\deploy\EmployeeTrack_ViewController_webapp.war
    [11:35:21 AM] Deploying Application...
    [11:35:23 AM] [Deployer:149191]Operation 'deploy' on application 'EmployeeTrack_ViewController_webapp' is initializing on 'ADFServer'
    [11:35:25 AM] [Deployer:149193]Operation 'deploy' on application 'EmployeeTrack_ViewController_webapp' has failed on 'ADFServer'
    [11:35:25 AM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application EmployeeTrack_ViewController_webapp on ADFServer.: Failed to load webapp: 'EmployeeTrack_ViewController_webapp.war'.
    [11:35:25 AM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'EmployeeTrack_ViewController_webapp.war'
    [11:35:25 AM] Caused by: java.lang.ClassNotFoundException: oracle.adf.library.webapp.ResourceServlet
    [11:35:25 AM] See server logs or server console for more details.
    [11:35:25 AM] weblogic.application.ModuleException: Failed to load webapp: 'EmployeeTrack_ViewController_webapp.war'
    [11:35:25 AM] Deployment cancelled.
    [11:35:25 AM] ---- Deployment incomplete ----.
    [11:35:25 AM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

  • Error while deploying a application on weblogic 10.3

    Hi experts,
    deploy my application on weblogic 10.3
    this error occurs:
    java.lang.ClassCastException: com.ctc.wstx.stax.WstxInputFactory cannot be cast to javax.xml.stream.XMLInputFactory
    If I remove wstx-asl-3.2.1.jar. And the application can be deployed.
    But My application really needs this wstx-asl-3.2.1.jar to connect to web service.
    Can anyone tell me how to fix this problem?
    Thanks

    Hi experts,
    deploy my application on weblogic 10.3
    this error occurs:
    java.lang.ClassCastException: com.ctc.wstx.stax.WstxInputFactory cannot be cast to javax.xml.stream.XMLInputFactory
    If I remove wstx-asl-3.2.1.jar. And the application can be deployed.
    But My application really needs this wstx-asl-3.2.1.jar to connect to web service.
    Can anyone tell me how to fix this problem?
    Thanks

  • Error while deploying the application

    Hi,
    I am trying to deploy an application on WLS 9.0 on Windows XP.
    I get the following error while deploying.
    "Cannot set web app root system property when WAR file is not expanded"
    Here is the command I used and the output.
    C:\bea\weblogic90\server\bin>java weblogic.Deployer -adminurl t3://localhost:7001 -username weblogic -password weblogic -deploy -name prs -source C:\bea\user_projects\domains\consoleExtensions\applica
    tions\abc.war -targets AdminServer
    weblogic.Deployer invoked with options: -adminurl t3://localhost:7001 -username weblogic -deploy -name abc -source C:\bea\user_projects\domains\consoleExtensions\applications\abc.war -targets AdminServer
    <Feb 28, 2006 10:58:49 AM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operatio
    n for application, abc [archive: C:\bea\user_projects\domains\consoleExtensions\applications\abc.war], to AdminServer .>
    Task 0 initiated: [Deployer:149026]deploy application abc on AdminServer.
    Task 0 failed: [Deployer:149026]deploy application abc on AdminServer.
    Target state: deploy failed on Server AdminServer
    Cannot set web app root system property when WAR file is not expanded
    I am deploying my application as a .war file. I dont get this error on solaris. I dont get this error even on windows when it is deployed in exploded format.
    Has anyone ran into such problem. Please let me know if you anyone knows what is the problem.
    Any help is greatly appreciated.
    Thanks in advance
    Sarat

    I changed the schema location in my WSDL and tried deploying it and it worked.
    But now there is a new problem that has come up. When I try testing the service, it gives me an error saying that there is a problem with the end point.
    The error I get is as follows:
    The selected operation process could not be invoked.
    An exception occured while invoking the webservice operation. Please see logs for more details.
    oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: oracle.fabric.common.FabricInvocationException: Unable to access the following endpoint(s): http://prodtest.sj.vindicia.com/soap.pl<br>
    java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: oracle.fabric.common.FabricInvocationException: Unable to access the following endpoint(s): http://prodtest.sj.vindicia.com/soap.pl
    The server seems to be on but I'm not able to reach it.

  • HT5654 Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Hello, Jdragone. 
    Thanks for the question.  Start with completely uninstalling iTunes and all of it's components in the order specified in the article below.  Once this is done, download and install iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H.

  • An error occurred while preparing the installation. Try running the application again

    I Have erased the hard drive of my MBP in order to perform a clean reinstall of OS X Mavericks, according to these instructions.
    When I tried to reinstall, my internet connection stopped (was broadcasting via another MBP and the cable from that one got disconnected), so I restarted the erased MBP to try again. Holding command+R, it booted in internet recovery (as the recovery partition was erased along with the rest of the hard drive), but could not connect over the broadcasted WiFi, so I created a bootable USB flash drive according to these instructions on the other MBP.
    This installation went smooth without any hiccups, but due to an oversight I had to do it again the next day.
    I took the same steps, with the same bootable drive (I did not create a new one the first time) but this time I couldn’t get through the prepare to install phase. At the end, where the “about a second remaining” message stays for about 20 minutes, I get the “An error occurred while preparing the installation. Try running the application again” message. When I quit the installer (only option at that stage) and return to Disk Utility, the internal drive on which I tried to do the installation is not visible anymore.
    I tried this (after a reboot every time) with a new bootable usb drive with the same download of the OS X Mavericks installer and with a new one, each ending with the same error. The installer was downloaded on an MBP on which Mavericks is also installed, with the same Apple ID. The App Store did not allow me to change Apple ID for the Mavericks download. Can this pose a problem? It did work the first time, though.
    Note that this error occurs at a different stage than the one with the same message due to the wrong date (this discussion amongst others). I also checked the date in terminal and this appears to be correct, when I consider the timezone.
    Here are a few lines from the installer log (omitted similar lines and lines that could contain personal information). The most important line is the last one, indicating the error.
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:Install  PROJECT:Install-846
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:IA  PROJECT:InstallAssistant-476.8
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Hardware: MacBookPro9,2 @ 2.50 GHz (x 4), 4096 MB RAM
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Running OS Build: Mac OS X 10.9.3 (13D65)
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: DYLD_NO_FIX_PREBINDING=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __CF_USER_TEXT_ENCODING=0x0:0:0
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PWD=/
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: SHLVL=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __OSINSTALL_ENVIRONMENT=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: CI_DEFAULT_OPENCL_USAGE=0
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: OS_INSTALL=1
    Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using distribution archive from /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Configuring products from SharedSupport folder
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Install is double-dmg. Not adding chunklist to download list.
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallDVDProduct> based on media at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport at distance 5
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallESDProduct> based on distribution at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
    Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Checking Software Update catalog URL https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not load Software Update catalog: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fedd960ccc0 {NSUnderlyingError=0x7feddc866ef0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSLocalizedDescription=The Internet connection appears to be offline.}
    Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not fetch SWU catalog to create SWU product
    Jun 22 02:14:49 localhost Install OS X Mavericks[423]: LSExceptions [0x7fedd9446e50] unloaded
    Jun 22 02:15:12 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
    Jun 22 02:20:55 localhost Install OS X Mavericks[423]: Created IATool object:dbe23a50
    Jun 22 02:20:56 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
    —a lot of similar messages, but for other packages —
    Jun 22 02:20:56 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:21:09 localhost Install OS X Mavericks[423]: Preventing machine sleep.
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using product IA_PKSecureNetEnabledProduct <file:///Volumes/schijf/OS%20X%20Install%20Data/> at distance 5
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using existing boot files dir at /Volumes/Install OS X Mavericks/.IABootFiles
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using mutable product path: /Volumes/schijf/OS X Install Data
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using boot files path: /Volumes/Install OS X Mavericks/.IABootFiles
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
    —a lot of similar messages, but for other packages —
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
    —a lot of similar messages, but for other packages —
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Retrieving 0 packages (0.000 GB)
    *****This is where the timer starts saying “”About a minute remaining”*****
    Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Verifying InstallMacOSX.pkg/InstallESD.dmg
    Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Finished operation queue
    Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Opening /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/InstallESD.dmg
    Jun 22 02:42:38 localhost Install OS X Mavericks[423]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
    Jun 22 02:42:39 localhost Install OS X Mavericks[423]: Extracting Boot Bits from Inner DMG:
    Jun 22 02:42:41 localhost Install OS X Mavericks[423]: Copied kernelcache
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied Boot.efi
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied PlatformSupport.plist
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Ejecting disk images
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Generating the com.apple.Boot.plist file
    Jun 22 02:42:42 localhost Install OS X Mavericks[423]: com.apple.Boot.plist: {
          "Kernel Cache" = "/.IABootFiles/kernelcache";
          "Kernel Flags" = "container-dmg=file:///Install%20OS%20X%20Mavericks.app/Contents/SharedSupport/ InstallESD.dmg root-dmg=file:///BaseSystem.dmg";
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Done generating the com.apple.Boot.plist file
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing /Volumes/Install OS X Mavericks -- /Volumes/Install OS X Mavericks/.IABootFiles
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing Mount Point:/Volumes/Install OS X Mavericks Folder:/Volumes/Install OS X Mavericks/.IABootFiles plist:com.apple.Boot.plist
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ***************************** Setting Startup Disk *****************************
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******           Path: /Volumes/Install OS X Mavericks
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ******     Boot Plist: /Volumes/Install OS X Mavericks/.IABootFiles/com.apple.Boot.plist
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: /usr/sbin/bless -setBoot -folder /Volumes/Install OS X Mavericks/.IABootFiles -bootefi /Volumes/Install OS X Mavericks/.IABootFiles/boot.efi -options config="\.IABootFiles\com.apple.Boot" -label OS X Installer
    Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Bless on /Volumes/Install OS X Mavericks succeeded
    Jun 22 02:45:55 localhost Install OS X Mavericks[423]: Got error in writing to /Volumes/schijf/OS X Install Data/minstallconfig.xml
    That last line indicates the error that occurred. (The internal drive on which I try to install Mavericks is called “schijf”, it also already has been called Macintosh HD, with no effect. This time I tried another name during the reformat to see if and when the installer renames the disk. Does it do this, or should I call the disk “Macintosh HD” myself?)
    By now I also got past the internet recovery issues, being able to get the progress bar under the spinning globe and the option to install Lion (not Mavericks, but I suppose that’s because the MBP shipped with Lion). When I choose this option, the installer first spends a few hours downloading additional components. This eventually took less time than first indicated, but still about 4-5 hours. After this, the installation of about 24 minutes starts, but this takes much longer than the indicated 24 minutes, each minute taking about 15 minutes. When it was less than a minute, the internet connection got disconnected (but I don’t suppose it still needed an internet connection at this stage, having downloaded all additional components) and now the “Less than a minute” message has been there the whole night (about 9,5 hours), the last 9 hours with a spinning beachball on the screen after I accidentally clicked somewhere on the screen (nowhere in particular, he shouldn’t do something because of the click. After unplugging the power adapter, the battery icon on the screen wasn’t updated, and the WiFi icon simply disappeared, instead of showing no bars like it should when there’s no connection).
    Does Anyone know how I can fix the error, because I would prefer installing with a bootable drive. Is it worth it to continue waiting on the current, apparently stuck Lion installer to finish or should I force a reboot?
    Can I try using the Recovery Disk assistant (OS X Recovery Disk Assistant v1.0) to create a recovery disk with the other MBP? I think not, as this might cause trouble with 2 different MBP's using the same license.
    Thanks in advance!

    Since this thread seems to be gaining more speed than the other one i'm working on, i figured i'd add these images to help you all out detailing the exact problem.
    I'm having the same issue and I wanted to provide some info specific to my mac, and some info in general to help with diganosis.
    First, my specs
    Secondly, I am running an aftermarket 500 GB drive.
    Third, not sure if this is realated, but this screen suggests the proress will take 3 minutes, then it abruptly umps to the restart phase after about 1.5 - 2.5 minutes.
    And finally, here is the seeminly unavoidable error message.
    Also, other things I've tried now are
    installing it from the "show package contents area",
    mounting said DMG and trying to install from there.
    installing a package file called "upgradeos.pkg"
    no luck.

Maybe you are looking for

  • Should I re-attempt installing iOS7 on my iPhone 5?

    Hello Everyone, I am stuck. Please help. My 1st attempt to install iOS7 was unsuccessful, my phone went into recovery mode. I wasnt able to restore it back as well as it threw error 9. I had to restore it from a local store and now its running iOS 6.

  • IChat issue

    Hi Am having issue with iChat on my iMac, in which iChat wndow pop-ups everttime I log into the iMac. I have checked the User & Groups --> LoginItems and the iChat application is unchecked. Am not having similar issue with Macbook Pro. Can anyone hel

  • Video software

    hi i just got my ibook clamshell and i want to edit movies because i got a mac just for videos but without spending $1099 on a macbook so i got a refurbished ibook g3 clamshell but the bad thing is that i don't have any movie editing programs on it.

  • Missing/Invisible flash library graphics

    Hi, I recently got the free trial of Flash CC on my computer at home to work on a few projects that I am working on at my schools computers, which have CS5. Recently when I went onto the schools CS5 Flash, I imported my project which was a Flash CC p

  • Show image at certain points during embedded video?

    Hi all, Just before deployment, we have had a change request :-) I have slides with embedded videos, and these videos pause the slide until the video ends, the moves onto the next slide.  During the videos, we want certain images to appear in the sli