Error in importing image into SAP using SE78
Hi to all,
I was trying to upload a '.bmp" image into SAP using SE78 but I failed.
Se78 -> BMAP Bitmap Image -> Graphic -> Import -> Specified the complete path ->given name desc and type .
Ended up with the following message.
Graphic TRF_LOGO_REV could not be saved
(2TRF_LOGO_REV)
Pls. help as I am not sure whether I missed any step.
Thankx in advance.
Hi,
Go to SE78 Transaction ie Aministration of form graphics,
there select GRAPHICS General Graphics,under this BMAP Bitmap Images will come.
select that,then a sub window will appear.
There give the name of your logo and select the import button which is at the extreme left.
Then again a sub window appears,there give the path name and name of the logo,and some description then press enter.
Now the logo is uploaded,for preview you can select last button which is print preview.
Now goto the form,select the window where you want to print the logo.
Then in that window place the cursor at tag coloumn and select command line.
Now go to INSERT and select GRAPHICS.A subwindow appers click on 'stored on Document Server',
give the name of the logo and press enter.
Then the image information will be displayed on the form.Save the form and activate it.
Go to se38 transaction write the print program and execute.
Regards,
jaya
Similar Messages
-
Importing pictures into SAP using DTW
Hello all
I am trying to import pictures of Items into SAP using DTW.
I am using the Items template and putting the file path (e.g. C:\Projects\P29280\Admin\Item pics\Picture29.jpg) of the picture in the Picture field. At the moment the pictures are on the C drive of the server but even when I put them in the shared SAP folder they still dont import. The DTW import runs the import and there are no errors (i.e. it says that the update is successful) but when I go into SAP - the pics are not there....
Hmmmn... one wonders...as one does.
Can anyone who has done this before help me out?
Thanks!
Greeshma
p.s. I have also tried putting the file path in the ValidRemarks field but that doesnt work either .Hi Greeshma,
the import of picture it self into the database is not possible. SAP only stores the path and the file name. You need to set up the standard path under general settings (Make sure it is not a local path!). Then you could import the pictures by using the file name (no path is needed) and afaik it is case sensitive. Put the pictures into the set path.
Regards -
Forum,
Is there a way of importing images against items within SAP instead of doing it individually?
Regards,
JuanHi Juan......
There is no option to get the images uploaded through DTW.
It may possible by programatic way.........
Regards,
Rahul -
Error while uploading BITMAP image in SAP through SE78.
Hello all,
I am getting below error while uploading image into SAP through SE78.
'Bitmap file: No color table available (True Color, Bitcount 32)'.
I have tried searching for solution and got some help from below reply from a thread:
You may do these options:
1. Lower the resolution of the image
2. Lower the file size of the image
Regards,
Reymar
I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
Thanks in Advance.
- Jayant Sahu.Hi Daniel,
First of all, if you dont mind, start a new thread for your question please.
Anyways, answer to your question is --
You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
This way, your problem would be resolved.
Thanks.
Kumar Saurav. -
Error while uploading images to SAP Mobile Documents from iPad application using ObjectiveCMIS.
Hi,
I am getting the error while uploading images to SAP Mobile Documents from custom iOS(iPad )application using ObjectiveCMIS library.
My Custom method is as follows:
- (void)createSalesOrderRouteMapImageInFolder:(NSString*)salesOrderRouteMapFolderId routeMapImageTitle:(NSString *)imageTitle routeMapContent:(NSData *)imageData
NSInputStream *inputStream = [NSInputStream inputStreamWithData:imageData];
NSMutableDictionary *properties = [NSMutableDictionary dictionary];
[properties setObject:[NSString stringByAppendingFileExtension:imageTitle] forKey:@"cmis:name"];
[properties setObject:@"cmis:document" forKey:@"cmis:objectTypeId"];
[self.session createDocumentFromInputStream:inputStream
mimeType:@"image/png"
properties:properties
inFolder:salesOrderRouteMapFolderId
bytesExpected:[imageData length]
completionBlock:^(NSString *objectId, NSError *error) {
NSLog(@"Object id is %@",objectId);
if(error == nil) {
[inputStream close];
NSLog(@"Uploading Sales order route map successfully.");
[[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderSuccessNotification object:nil];
} else {
[inputStream close];
NSLog(@"Uploading sales order route map failed.");
[[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderFailedNotification object:error];
} progressBlock:^(unsigned long long bytesUploaded, unsigned long long bytesTotal) {
NSLog(@"uploading... (%llu/%llu)", bytesUploaded, bytesTotal);
OBjectiveCMIS Method in which i am getting error during upload:
- (void)sendAtomEntryXmlToLink:(NSString *)link
httpRequestMethod:(CMISHttpRequestMethod)httpRequestMethod
properties:(CMISProperties *)properties
contentInputStream:(NSInputStream *)contentInputStream
contentMimeType:(NSString *)contentMimeType
bytesExpected:(unsigned long long)bytesExpected
cmisRequest:(CMISRequest*)request
completionBlock:(void (^)(CMISObjectData *objectData, NSError *error))completionBlock
progressBlock:(void (^)(unsigned long long bytesUploaded, unsigned long long bytesTotal))progressBlock
// Validate param
if (link == nil) {
CMISLogError(@"Must provide link to send atom entry");
if (completionBlock) {
completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeInvalidArgument detailedDescription:nil]);
return;
// generate start and end XML
CMISAtomEntryWriter *writer = [[CMISAtomEntryWriter alloc] init];
writer.cmisProperties = properties;
writer.mimeType = contentMimeType;
NSString *xmlStart = [writer xmlStartElement];
NSString *xmlContentStart = [writer xmlContentStartElement];
NSString *start = [NSString stringWithFormat:@"%@%@", xmlStart, xmlContentStart];
NSData *startData = [NSMutableData dataWithData:[start dataUsingEncoding:NSUTF8StringEncoding]];
NSString *xmlContentEnd = [writer xmlContentEndElement];
NSString *xmlProperties = [writer xmlPropertiesElements];
NSString *end = [NSString stringWithFormat:@"%@%@", xmlContentEnd, xmlProperties];
NSData *endData = [end dataUsingEncoding:NSUTF8StringEncoding];
// The underlying CMISHttpUploadRequest object generates the atom entry. The base64 encoded content is generated on
// the fly to support very large files.
[self.bindingSession.networkProvider invoke:[NSURL URLWithString:link]
httpMethod:httpRequestMethod
session:self.bindingSession
inputStream:contentInputStream
headers:[NSDictionary dictionaryWithObject:kCMISMediaTypeEntry forKey:@"Content-type"]
bytesExpected:bytesExpected
cmisRequest:request
startData:startData
endData:endData
useBase64Encoding:YES
completionBlock:^(CMISHttpResponse *response, NSError *error) {
if (error) {
CMISLogError(@"HTTP error when sending atom entry: %@", error.userInfo.description);
if (completionBlock) {
completionBlock(nil, error);
} else if (response.statusCode == 200 || response.statusCode == 201 || response.statusCode == 204) {
if (completionBlock) {
NSError *parseError = nil;
CMISAtomEntryParser *atomEntryParser = [[CMISAtomEntryParser alloc] initWithData:response.data];
[atomEntryParser parseAndReturnError:&parseError];
if (parseError == nil) {
completionBlock(atomEntryParser.objectData, nil);
} else {
CMISLogError(@"Error while parsing response: %@", [parseError description]);
completionBlock(nil, [CMISErrors cmisError:parseError cmisErrorCode:kCMISErrorCodeRuntime]);
} else {
CMISLogError(@"Invalid http response status code when sending atom entry: %d", (int)response.statusCode);
CMISLogError(@"Error content: %@", [[NSString alloc] initWithData:response.data encoding:NSUTF8StringEncoding]);
if (completionBlock) {
completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeRuntime
detailedDescription:[NSString stringWithFormat:@"Failed to send atom entry: http status code %li", (long)response.statusCode]]);
progressBlock:progressBlock];
Attaching the logs:
ERROR [CMISAtomPubBaseService sendAtomEntryXmlToLink:httpRequestMethod:properties:contentInputStream:contentMimeType:bytesExpected:cmisRequest:completionBlock:progressBlock:] HTTP error when sending atom entry: Error Domain=org.apache.chemistry.objectivecmis Code=260 "Runtime Error" UserInfo=0x156acfa0 {NSLocalizedDescription=Runtime Error, NSLocalizedFailureReason=ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public void com.sap.mcm.server.service.AbstractChangeLogService.updateChangeLog(java.lang.String,boolean) throws com.sap.mcm.server.api.exception.MCMException method on bean instance com.sap.mcm.server.nw.service.NwChangeLogService@4e7989f3 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|NwChangeLogService in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.ejb.EJBTransactionRolledbackException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a; nested exception is: javax.ejb.EJBException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a}
2015-03-12 04:08:31.634 Saudi Ceramics[4867:351095] Uploading sales order route map failed.Hi Sukalyan,
Have you checked the below links?
These will give you step by step implementation procedure.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a099a3bd-17ef-2b10-e6ac-9c1ea42af0e9?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/WDJava/KmuploadusingWebdynproapplication
Regards,
Sandip -
When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?
This is happening even with photos that were taken on another camera, not just mine. My daughter told me that the laptop recently fell. The yellow streak is not anywhere else on the laptop, just on the photos in LR.I have had this problem on my desktop. I have been attempting to reproduce it where it can be debugged. Here are some observations/facts in my environment--no conclusions:
1. I do not import from camera or memory stick directly into LR. I copy all images (using Explorer) from camera to two different locations (backup location first); and then my working area. In both cases, after files are copied I mark them Read-only.
2. Poor observation, but in any event: the issue has only occurred when I do a large number of images. Its a poor observation as I have no exact number. I suspect when I do less than 50 always works well every time. However, I have also done some very large imports without issue.
3. Error only occurs with my RAW images--for me that's NEF. I have multiple cameras--those that only capture jpg images have never had an issue in LR.
4. Even if the file is marked Read Only issues can still occur. I then remove the image from the disk using LR -- and then manually (Explorer) copy in my backup image -- re import again and all is well. I think one time I exited LR and replaced the bad file with a backup and restarted LR and all was well again.
5. When it occurs I have performed a HASH value on the broken file and on the backed up file to determine if the file contents has changed--and each time the file contents has changed.
6. I have had this occur immediately after import, but most often it occurs like this... import large number of images; Make changes in Development Module on random image, export jpg of changes--exit LR. Open up LR and file is corrupted.
7. I have had this issue on multiple USB drives ( okay just 2 different drives have been tested ).
What next--fire up Process Monitor and monitor the system (specifically LR) to see if it reports any file open for write access when this occurs. So, far I have not had process monitor actually running when it occurs--one of these days. -
How to import images into BLOB datatypes
Dear All,
I'm trying to import image into BLOB table type.I'm executing this SQL commands but found error.
ORA-22288
ORA-06512
Please help me i'll be thank full.
Regards
FAHEEM LATIF
CREATE OR REPLACE DIRECTORY images AS 'C:\IMAGES';
CREATE TABLE test007 (column1 BLOB);
DECLARE
l_bfile BFILE;
l_blob BLOB;
BEGIN
INSERT INTO test007 (column1)
VALUES (empty_blob())
RETURN column1 INTO l_blob;
l_bfile := BFILENAME('IMAGES', 'MyImage.gif');
DBMS_LOB.fileopen(l_bfile, Dbms_Lob.File_Readonly);
DBMS_LOB.loadfromfile(l_blob, l_bfile, DBMS_LOB.getlength(l_bfile));
DBMS_LOB.fileclose(l_bfile);
COMMIT;
END;
/I know your original pl/sql routine contained a COMMIT, but did you use the same code with the COMMIT? If not, are you checking the table from a different session?
I ran your same code and it worked without issues. Are saying if you do a SELECT COUNT(*) from test007 it returns zero rows? -
Importing images into projects
can any1 please tell me how to import images into my netbeans IDE projects?this should be such that the jar file that is created displays them correctly- i am having this said problem with .jar files.
plz help!!i use a function createImageIcon(ImageIcon icon) wfor which i provide a definition.
the definition is as given in the java tutorial as follows
protected static ImageIcon createImageIcon(String path)
java.net.URL imgURL = LabelDemo.class.getResource(path);
if (imgURL != null) {
return new ImageIcon(imgURL, description);
} else {
System.err.println("Couldn't find file: " + path);
return null;
the program executes perfectly from the IDE when i use the run finction of F6 key. I use netbeans IDE. the images are kept in a folder named images in the 'src' folder of the project. this folder is used to store source files by the IDE. The main thing is i put the images in such a place that the program executes perfectly without errors from the IDE. using the IDE which shows the contents of a .jar file, i verified that the images are indeedd present in the JAR file. however i still continue to get the same error. infact after add ing the images folder and running a 'clean and build' operation , the only difference is that the jar file, which still doesnt display images on buttons, labels etc has increased in size confirming tht the images have been added- i also verified this from the command line.
but the same problem persists. -
I am importing images into Flash only to discover that the images (1280 x 720) are not centered on the stage. Most of the time the images are off centre by a few pixel widths or in some cases by an inch or more. I can't get them to centre unless I clear the stage and import a few times.
Is there a way to import and have the images framed perfectly within the stage.
I'm currently using Flash CS5.5
Thank you.You can also click the two blue boxes icon under the Timeline and then drag select the whole timeline and that will let you select all your frames at once. then just position them all where you want them at the same time. I attached a screen cap of the area I'm talking about. It's right after the two white boxes.
-
Problems with importing images into Lightroom cc
Problems with importing images into Lightroom cc
I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
Now I have left lightroom 5 and where the input port works fine.
What happened to the upgrade from Lightroom 5 to lightroom cc?
The camera has the latest software.I've now tested in various ways.
First, I have images on both memory cards in the camera.
Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
I turn the camera off after a while and get the next meddelnade (picture 1)
Which can be translated:
"The following files were not imported because they could not read (351)
Property 1-100
etc. "
Picture 1.
Picture 2 -
Auto import images into aperture...and continue importing...
i know that there is a script to import images into aperture, but i need to use this with a tethered camera....so i use a canon app to shoot files to a folder and as the files come in, i need them to get imported as they keep coming in....i am only referencing them, so they are actually staying within the folder....i can import the files but i don't know how to/which command "keeps checking the folder for new files that came in" hope this makes sense....
i know that there is a "hot folder" app available which seems to be a automator app, but it is superslow and only brings in every 4th or 5th image (and sometimes just brings everything to a halt...)i know that there is a script to import images into aperture, but i need to use this with a tethered camera....so i use a canon app to shoot files to a folder and as the files come in, i need them to get imported as they keep coming in....i am only referencing them, so they are actually staying within the folder....i can import the files but i don't know how to/which command "keeps checking the folder for new files that came in" hope this makes sense....
i know that there is a "hot folder" app available which seems to be a automator app, but it is superslow and only brings in every 4th or 5th image (and sometimes just brings everything to a halt...) -
Hi,
I imported images into Lightroom from a folder I created on my desktop, I got images from Iphoto, and now Lr tells me images are "offline". I cannot work on them. I haven't purchased license yet and am using the 30 trial, though I don't thing that should matter. Please help.
Thank you,
Patricia MicaelaHey Patricia, yes you can learn lightroom in many ways. One is by going through the below Lightroom Help files.
http://helpx.adobe.com/lightroom/help/learn-lightroom.html
Other is through different LR videos present on various sites including Adobe TV and Lynda.com. I was able to gather few of them for you.
http://tv.adobe.com/show/learn-lightroom-4/
http://www.lynda.com/search?q=lightroom+4&x=19&y=7&f=producttypeid%3a2%3bmeta_software_fac et%3aLightroom
Hope that Helps!
Happy Learning. -
Importing Images into IDVD for Slidshow
I am at a loss as to what is the best image size, resolution size, etc. when it comes to importing images into IDVD. I usually size my prints
4 x 6 @ 300 dpi.. This looks fine in the slideshow preview. After I burn the dvd and view it, the images lose quality, etc..
Any help would be appreciatedWhat you're creating in iPhoto is a movie file that will get cut off in iDVD because of the TV over scan issue. Only stills imported and assembled into a slideshow in iDVD can be scaled to avoid the over scan.
So to get what you want you'll have to import the stills into iDVD from iPhoto and create the slideshow there.
If you have Quicktime Pro you can mask the QT movie with a black mask and cause the iPhoto QT movie to be scaled to the TV safe area. The steps are below. You'll have to experiment with the final sizes to get it exact:
Masking Movies to the TV Safe Area for iDVD
The mask should be 640 x 480 pixels and the movie at approx. 580 x 386 (I arrived at this figure by making a snapshot of the TV save area of an iDVD project with Snapz). You can set this size after you’ve joined it with the mask movie with Quicktime Player Pro.
Import the black mask jpg file into iMovie and and export it as a .mov file at the same length as your movie (there may be a way to not have to create a specific length mask for each movie but I haven't found it. If the times do not match the movie file will be synced to the length of the mask movie).
Open the mask movie in QT Player Pro and then open your regular movie and make it the front window of the two. Now you'll need to run a QT Player AppleScript titled "Merge Movie 1 into Movie 2". You can get it from this Apple site: Quicktime Player Scripts.
Then run the script. You can then run the merged movie to check it out. Your movie will be located in the upper lefthand corner of the window when played.
When you open the Movie Properties window from the Window menu for the combined file you’ll see the following:
Video Track 1: the black mask
Video Track 2 : you movie file
Tween track: Have no idea what this is.
Sound track: self explanaotry
Black mask.
To set the size of your movie to the correct size select it in the Properties window and click on Visual Settings pane. Then enter 580 in the first field and hit enter. With the Preserve Aspect Ration box checked the other size will automatically be set.
To center the video track in the center of the mask select the Video Track 2 item and plug in a offset of about: 70 & 45. You'll probably have to play with that to fine tune the centering. Doing the math and subtracting the movie dimensions from the mask dimensions and dividing by two just didn't get it perfectly centered bit with a little eyeballing and trial and error it got there.
Now save as a new self contained movie after checking the High Quality box at the bottom right.
You can now import it into iDVD for preview and burning. One drawback is that you can't invoke the TV save area for a movie in iDVD to check it out. But you can mark it on the monitor screen while viewing a menu or slideshow and then play the movie to see how close you came. I found that the size was still a little under the TV safe area when burned and played on my TV. It may be the difference in normal CRT screens and flat screens, etc. -
Error while load data into Essbase using ODI
Hi ,
I'm getting the following error while loading measures into Essbase using ODI, I used the same LOG nd Error file and file path for all my Dimensions , this worked well but not sure why this is not working for measures....need help.
File "<string>", line 79, in ?
com.hyperion.odi.common.ODIHAppException: c:/temp/Log1.log (No such file or directory)
Thanks
VenuAre you definitely running it against an agent where that path exists.
Have you tried using a different location and filename, have you restarted the agent to make sure there is not a lock on the file.
Cheers
John
http://john-goodwin.blogspot.com/ -
Convert xml into SAP using dataset
Hi All,
How to convert XML into itab using dataset, in this conversion have any function module available? please give me a sample program (having any). and material also.
Thanks,
Suresh maniarasuHi,
First you need to get the XML file Data into SAP using the Function Module and can populate the data into an inernal table.
TEXT_CONVERT_XML_TO_SAP
DMC_CONVERT_XML_TO_TABLE
or you can use the following classes
CL_RSRD_CONVERTER_XML
CL_WDR_XML_CONVERT_UTIL
CL_EXM_IM_ISHCM_CONV_XML_SAP
Thank U,
Jay....
Maybe you are looking for
-
How to use Adobe Edge Web Fonts correctly
I am a Dreamweaver newbie and am trying to learn how to use it through the tutorials. I am stuck at part 3 trying to use Adobe Edge Web Fonts correctly in my web site. As far as I can tell I have followed the instructions in the tutorial correctly, b
-
How to set Display Only for some records in CAT2 Worklist
Hi, I have a requirement to modify an attributes for some records in the Worklist of CAT2. We have an external system where we book our time. Weekly we import data from that external system into CATSDB using BAPI for every single employee. We would l
-
Trying to download photoshop cc trial on hp windows 7...
I am trying to download the photoshop cc trial on my hp. I keep getting an error message saying I am not connected to the internet although I am. This happens when I try to run the installer. maybe my pc is too antiquated? Help?! Thanks. SJJ
-
Repaired imac has come back with lion. how do I restore backed up files
I had my iMac's hard disk replaced under warranty. I now need to restore my backed-up files from time machine. The Apple store were nice and have upgraded my OS from Snow Leopard to Lion, so I'm now confused as to how I make sure I restore the right
-
New install, No video output to monitor when booting
Brand new MOBO, EVGA 280GTX, Corsair 850W power supply. I plugged my power SLI power supply into vid card...do I still need to plug in a molex into the MOBO?