Error in Inbound File Adapter

Hello,
The scenario :
Flat File => XI => Enterprise (4.7)
I'm getting the following error in the Adapter Engine at time of Reloading the new inbound file adapter.
==========
<i>***** Tue Jul 06 11:46:54 EDT 2004 *****
11:46:59 (4023): File adapter initialized successfully
11:46:59 (4007): File adapter started
11:47:03 (4050): ERROR: Unexpected exception "com.sap.aii.messaging.adapter.ftp.FTPEx: Unknown extension in database file name." occurred</i>
==========
The inbound file adapter is as below ... :
==========
<i>classname=com.sap.aii.messaging.adapter.ModuleFile2XMB
mode=FILE2XMB
XMB.TargetURL=http://host123:8001/sap/xi/engine?type=entry
XMB.SenderBusinessSystem=Sender_System
XMB.SenderInterfaceNamespace=http://abc.com/xi/
XMB.SenderInterfaceName=DataFile_Out
XMB.User=xisuper
XMB.Password=xipass
XMB.ReceiverBusinessSystem=ENT
XMB.ContentType=text/plain
XMB.ContentKind=T
XMB.QualityOfService=EO
file.sourceDir=
file.sourceFilename=DATAFILE
file.processingMode=test
file.pollInterval=060
ftp.host=100.200.300.400
ftp.port=21
ftp.user=userid
ftp.password=passwd
ftp.mode=Text</i>
==========
Any help is greatly appreciated.
Thanx in advance.
Homiar.

All,
Problem is solved. I changed the value for the Source directory & the adapter started to poll.
Thanx,
Homiar.

Similar Messages

XI3.0 Inbound File Adapter Error on ModuleSLDAccessir.

Greeting,
I have just installed the technical Adapter for XI.3 I tried to use the Inbound File adapter, unfortunately I had two big issues:
1- I was able to execute run_adapter.bat but nothing was reaching the XI system.
When I checked the Log File: I found the following error:
Oct 13, 2004 1:22:08 PM ...aii.messaging.adapter.ModuleSLDaccess [Thread-9] Error: Initializing ModuleSLDaccessor failed with 'java.lang.NoClassDefFoundError: com/tssap/dtr/client/lib/protocol/HTTPException'
2- Second issue: when I try to access the adapter via the browser, the HTML page are not correct ! there is no text displayed. I just got code like : {!%5124_G_XMIT%!}
is there other setting to do ? I followed exactly the install book !
Thanks for your help.
Regards.
M. Zehana
Any help is more than welcome.

Check that you are using XI 3.0. You dont have to use the run_adapter.bat unless you are using the J2SE adapter ( which is 2.0 ) to communicate with an XI3.0 IS. If you have XI3.0 the adapters are configured in the integration directory which are now called communication channels. Therefore an inbound file adapter will be called a sender communication channel. You can create a communication channel either within a scenario or directly in the objects area for the Service ( business system etc ).
Mark

Inbound file adapter error

Hi,
I have inbound file adapter and when i run the test, the XML message displays the following error
HTTP_STATUS_CODE_NEQ_OK
HTTP status code 401 : Unauthorized
please do help me .
thankx

Hi,
Yes, i m using standalone xi2.0 , the configuration code is as below
file adapter java class
classname=com.sap.aii.messaging.adapter.ModuleFile2XMB
mode=FILE2XMB
Integration Engine address and document settings (example, see docu)
XMB.TargetURL=http://<host:port>/sap/xi/engine?type=entry
XMB.User=XIAPPLUSER
XMB.Password=XIPASS
#XMB.SenderBusinessSystem=ExtAdapterSender
XMB.SenderBusinessSystem=b2
#XMB.SenderInterfaceNamespace=http://sap.com/xi/xidemo
XMB.SenderInterfaceNamespace=int1
XMB.SenderInterfaceName=FILEINBOUND
XMB.ReceiverBusinessSystem=b1
#XMB.ContentKind=B
XMB.ContentKind=T
XMB.ContentType=text/xml
XMB.QualityOfService=EO
##File Adapter specific parameters (example, see docu)
file.sourceDir=c:/temp
file.sourceFilename=test.txt
file.processingMode=archive
file.archiveDir=c:/temp_archive
file.pollInterval=0
##xml conversion properties if mode FILE2XMBWITHROWCONVERSION specified (example, see docu)
#xml.fieldFixedLengths=15,25
#xml.processFieldNames=notAvailable
xml.fieldSeparator=~
Please let me whether this is correct or im missing some configuration.
thankx

Inbound file adapter error - Guarenteed delivery...

Hi,
I am configuring inbound file adapter and I get an error:
"Guarenteed delivery - operation for 1 file pending"
The adapter does not work for the files pending.
Can anyone help?
Oded.

Hay guys , I am realy stuck,can anybody share his experience with me?
Oded

Error Handling in File Adapter

I have been working on a requirement where the file adapter picks up the file and gives to the BPEL for processing the data.
So, in order to do Error Handling for file adapter, i have been reading the Oracle documentation for technology adapters. In that, some of the
points which i felt valuable for my error handling when using file adapter are the uniqueMessageSeparator property, fault-policies for rejected messages,
and one of the action for rejected messages could be writing the payload to a file or invoking any other webservice.
In my composite, i have configured the file adapter as a service for reading files, and i defined the xsd using the native format builder....If i put some data like 'aaaa' in the attribute of type integer , the .csv file is being picked up and its being passed to the BPEL without any error ? I believe there should be a translation error...right...
But i am not getting the error, please tell me if anything is wrong in my xsd....
Here is my xsd...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/InboundService"
targetNamespace="http://TargetNamespace.com/InboundService"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="names">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="name" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
And for DB Adapter, there is a property called SchemaValidation, i think that is not there for File adapter, by default it will take care of validation i guess....In another composite, my file adapter is picking up the .xml file and if i put any wrong data over there, that is working fine, i am getting the translation error, but only here in the case of csv file, i am not getting the error. Experts, please help me in this regard...I am using SOA 11G
Thanks,
Naresh

Hi Yatan,
Thanks for the reply. I did the same way, where my composite is picking up an XML file and translation error is coming. Even the fault policies are working fine, like writing to a file and even invoking other web service. Its really good that you have achieved the same thing in csv files. But the same thing i am unable to achieve when my file adapter is picking up the csv file. I really cant understand where i am doing wrong.
here is my XSD which i defined through my native builder format...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/FileRecv"
targetNamespace="http://TargetNamespace.com/FileRecv"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="Roots">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
the jca file ..
<adapter-config name="FileRecv" adapter="File Adapter" wsdlLocation="FileRecv.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter" UIincludeWildcard="n*.csv"/>
<endpoint-activation portType="Read_ptt" operation="Read">
<activation-spec className="oracle.tip.adapter.file.inbound.FileActivationSpec">
<property name="DeleteFile" value="true"/>
<property name="MinimumAge" value="0"/>
<property name="PhysicalDirectory" value="C:\files"/>
<property name="Recursive" value="false"/>
<property name="PollingFrequency" value="5"/>
<property name="IncludeFiles" value="n.*\.csv"/>
<property name="UseHeaders" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
I told that the file will contain only 1 record while defining xsd and i kept a record whose values are John , Peter and akjdkjdskj.
Now if the data is like above, the file is still getting picked up without any translation error and the BPEL is getting completed successfully...
Is it possible for you to send your sample project and the csv file from which you have defined the xsd to me if you dont mind ?
Thanks,
Naresh

XI 2.0 Inbound file adapter : Connection reset by peer

I am using XI 2.0 and have an inbound file adapter. It polls every 5 minutes. But at least 1 or twice a day the file adapter stops with the following error message.
"java.net.SocketException: Connection reset by peer: JVM_recv in socket input stream read" occurred \par
There have been times when this runs for days or weeks without any problems.
Has anyone else seen this issue and how do your correct it?
Currently I have to go into the file adpaters and restart them manually. It would be nice if there was some way to automate this function. Any ideas?
Regards,
Jim

With JDK 5.0 use ojdbc5.jar instead of ojdbc14.jar.

Error in reciever file adapter , where i am getting file name dynamically

hi all,
error in reciever file adapter , where i am getting file name dynamically, please help me in this isssue , i am trying for a long time
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)'

i am getting new error
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
this is my strcuture
and i have changed my structure
<HEADER>
<ADDRESS1/>
<ADDRESS2/>
<ADDRESS3/>
<ADDRESS4/>
</HEADER>
<HEADER_GST>
<TAX1/>
<TAX2/>
<TAX3/>
</HEADER_GST>
<LINE>
<QTY/>
<UOM/>
<UNIT_AMT/>
<CHARGE_TO_DT/>
</LINE>
<FILENAME>
<FILENAME/>
</FILENAME>
i have given the recordset structure as
HEADER,HEADER_GST,LINE,FILE

Error in Receiver File adapter - FCC

Got error message as "File Adapter Receiver Channel CC_OB_REQ: Not initialized - cannot proceed: null"
My requirement is to send IDOC to file which consists of 4 fields, My target message interface is
MT_REQ
FILE_STRUC
    FILE_OP
       AAA (Field1)
        BBB(Field2)
       CCC(Field3)
       DDD(Field4)
Output file should contain the above 4 fields with fixed lengths 20,1,1,2
So I declared FCC in File Adapter as
I tried many options
RecordSet Structure: MT_REQ,FILE_STRUC,FILE_OP
FILE_STRUC.fieldSeparator - 'nl'
FILE_OP.fixedFieldLengths - 20,1,1,2
FILE_OP.fieldSeparator - 'nl'
FILE_OP.endSeparator - 'nl'.
Please let me know where is the problem?
Thanks in advance,
Krishna

Hi Ramakrishana,
In FCC fixed length file format when your XML payload is goes to Adaptor engine, it should contain all fields in XML. Otherwise its throw error in FCC channel. Please check receiver payload at SXMB_MONI or message monitoring of Run time work bench. In that payload you will find that some of the fields is not generated in target payload.
Field in receiver payload is not generated means from sender payload corresponding field is not coming. As per my past experience this generally happens in IDOC sender.
solution:- In message mapping in every field from IDOC to file use mapWithDefault node function with null value. Due to this though if any field do not generates in IDOC, corresponding field will generate in File Payload and it will not throw error in FCC.
Regards,
Prashant

File Conversion error in Receiver File Adapter

Hi ,
I am facing the below error in receiver file adapter .
Conversion initialization failed: java.lang.Exception: java.lang.NumberFormatException: For input string: "4|8|10|2|10|4|10|4|40|40|40|1|20|2|20|8|40|0|12|12|12|1|12|4|4|8|40|8|8|8|8|12|40|8|10|10|10|10|10|1|10"
Kindly suggest !
Regards,
Hemanthika

Hi,
Check it - File adapter is active ? try to Re-activate the same.
Also do CPACache Refresh.
Still problem, tyr out by restarting the Adapter Engine.
I guess you're just trying to send all the data in your file record to a <data> element as a whole. If so, this blog will help you:
Configuring Generic Sender File CC Adapter
Under certain operating system platforms, such as Solaris, the APIs used by the Java Runtime (JRE) are not Unicode-aware. Consequently, the JRE needs to be configured to correctly interpret the character set it receives from the operating system.
This is configured through the "file.encoding" system property as well as the "LANG" environment variable.
Make sure you set "file.encoding" to a character set (such as ISO-8859-1) that supports the special characters you would like to process. This system property can be configured by appending "-Dfile.encoding=<encoding>" to the Java VM parameters section of the SAP J2EE Config Tool.
Additionally, you need to set the "LANG" environment variable to a locale that supports more than 7 bits, such as "de.ISO8859-1". The encoding you specify in the LANG environment variable needs to match the encoding set via "file.encoding".
You can persistently configure the environment variable by setting it in the profile $HOME/.sapenv_$HOSTNAME.csh of the <sid>adm user: setenv LANG de.ISO8859-1
Refer this article
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
See below link
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please refer this thread .
File Adapter Not Initialized Error
Cheers,
Regards,
Suryanarayana

Inbound File Adapter Error - NullPointerException

Hi,
We are on XI 3.0. We have a scenario of input file via inbound file adpater to R/3 using proxies.
When activating the communication channel (file adapter), an error is raised in the adapter monitor. The error states, "Error: Module Exception 'com.sap.aii.af.mp.processor.ModuleProcessorException' found, cause: java.lang.NullPointerException".
Does anyone have any ideas on this error?
Thanks in advance.
Best Regards,
Doo

Hi,
Can you check the communication channel - "Module" tab. A module processor has to be specified here. For the File Adapter the default value for the Module Processor should be "localejbs/CallSapAdapter" and the Type will be "Local Enterprise Bean".
Warm regards,
Venki.

Error in Inbound JMS adapter(in ESB project)

Hello all,
I am trying out a sample ESB application, where an ESB service is listening on a JMS topic (OEMS database persistence) for new employee notifications. Upon receiving the message, the service will invoke a stored procedure to insert a record in the database.
I am using inbound jms adapter to receive the jms messages from a jms topic, that is configured using Oracle AQ. I made all the necessary changes in oc4j-ra.xml, application.xml, and data-sources.xml files.
But when I send a jms messages, I see the following errors in the oc4j log.xml:
Failed to activate endpoint for Service "DefaultSystem.AQJMStoDB.ListenForNewEmployees". Reason : oracle.tip.esb.server.common.exceptions.BusinessEventFatalException: An unhandled exception has been thrown in the ESB system. The exception reported is: "ORABPEL-12517
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter was unable to activate the endpoint :{} due to the following reason: ORABPEL-12531
Error while setting JCA WSDL Property.
Property setPassword cannot be set on oracle.tip.adapter.jms.JmsManagedConnectionFactory due to: [Caused by: Can't find bundle for base name oracle.tip.pc.infra.exception.i18n.PCExceptionList, locale en_US]
Please verify the spelling of the property.
[Caused by: Can't find bundle for base name oracle.tip.pc.infra.exception.i18n.PCExceptionList, locale en_US]
Please correct the reported issue and redeploy the BPEL process.
     at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:566)
     at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateInboundJcaEndpoint(Unknown Source)
     at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.performEndpointActivation(Unknown Source)
     at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateEndpoint(Unknown Source)
     at oracle.tip.esb.server.service.impl.inadapter.InboundAdapterService.activateEndpoint(Unknown Source)
     at oracle.tip.esb.server.service.impl.inadapter.InboundAdapterService.activateService(Unknown Source)
     at oracle.tip.esb.server.service.EsbServiceFactory.activateEsbService(Unknown Source)
     at oracle.tip.esb.server.service.EsbServiceFactory.initializeEsbServices(Unknown Source)
     at oracle.tip.esb.server.common.RuntimeESBSystem.start(Unknown Source)
     at oracle.tip.esb.common.system.SystemFactory.startSystemsForCluster(Unknown Source)
     at oracle.tip.esb.server.bootstrap.RuntimeResourceAdapter.startListenersForSystems(Unknown Source)
     at oracle.tip.esb.server.bootstrap.RuntimeResourceAdapter.startListeners(Unknown Source)
     at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter.startESBListeners(Unknown Source)
     at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter.setupRuntime(Unknown Source)
     at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter.initializeESB(Unknown Source)
     at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter$PingTester.run(Unknown Source)
     at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
     at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
     at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
     at java.lang.Thread.run(Thread.java:595)
Caused by: ORABPEL-12531
Error while setting JCA WSDL Property.
Property setPassword cannot be set on oracle.tip.adapter.jms.JmsManagedConnectionFactory due to: [Caused by: Can't find bundle for base name oracle.tip.pc.infra.exception.i18n.PCExceptionList, locale en_US]
Please verify the spelling of the property.
     at oracle.tip.adapter.fw.wsdl.WSDLUtils.invokeSetMethod(WSDLUtils.java:763)
     at oracle.tip.adapter.fw.wsdl.WSDLUtils.setCciSpecParameters(WSDLUtils.java:665)
     at oracle.tip.adapter.fw.wsdl.WSDLUtils.setupManagedConnectionFactory(WSDLUtils.java:465)
     at oracle.tip.adapter.fw.wsdl.WSDLUtils.setupManagedConnectionFactory(WSDLUtils.java:421)
     at oracle.tip.adapter.fw.jca.AdapterLocator.findResourceAdapter(AdapterLocator.java:195)
     at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:341)
     ... 20 more
Can anybody provide any inputs on this error?
Thanks,
Pram

All,
Problem is solved. I changed the value for the Source directory & the adapter started to poll.
Thanx,
Homiar.

Error in Inbound JMS adapter (ESB project)

Hello all,
I am trying out a sample ESB application, where an ESB service is listening on a JMS topic (OEMS database persistence) for new employee notifications. Upon receiving the message, the service will invoke a stored procedure to insert a record in the database.
I am using inbound jms adapter to receive the jms messages from a jms topic, that is configured using Oracle AQ. I made all the necessary changes in oc4j-ra.xml, application.xml, and data-sources.xml files.
But when I send a jms messages, I see the following errors in the oc4j log.xml:
Failed to activate endpoint for Service "DefaultSystem.AQJMStoDB.ListenForNewEmployees". Reason : oracle.tip.esb.server.common.exceptions.BusinessEventFatalException: An unhandled exception has been thrown in the ESB system. The exception reported is: "ORABPEL-12517
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter was unable to activate the endpoint :{} due to the following reason: ORABPEL-12531
Error while setting JCA WSDL Property.
Property setPassword cannot be set on oracle.tip.adapter.jms.JmsManagedConnectionFactory due to: [Caused by: Can't find bundle for base name oracle.tip.pc.infra.exception.i18n.PCExceptionList, locale en_US]
Please verify the spelling of the property.
[Caused by: Can't find bundle for base name oracle.tip.pc.infra.exception.i18n.PCExceptionList, locale en_US]
Please correct the reported issue and redeploy the BPEL process.
at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:566)
at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateInboundJcaEndpoint(Unknown Source)
at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.performEndpointActivation(Unknown Source)
at oracle.tip.esb.server.service.impl.inadapter.ESBActivationAgent.activateEndpoint(Unknown Source)
at oracle.tip.esb.server.service.impl.inadapter.InboundAdapterService.activateEndpoint(Unknown Source)
at oracle.tip.esb.server.service.impl.inadapter.InboundAdapterService.activateService(Unknown Source)
at oracle.tip.esb.server.service.EsbServiceFactory.activateEsbService(Unknown Source)
at oracle.tip.esb.server.service.EsbServiceFactory.initializeEsbServices(Unknown Source)
at oracle.tip.esb.server.common.RuntimeESBSystem.start(Unknown Source)
at oracle.tip.esb.common.system.SystemFactory.startSystemsForCluster(Unknown Source)
at oracle.tip.esb.server.bootstrap.RuntimeResourceAdapter.startListenersForSystems(Unknown Source)
at oracle.tip.esb.server.bootstrap.RuntimeResourceAdapter.startListeners(Unknown Source)
at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter.startESBListeners(Unknown Source)
at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter.setupRuntime(Unknown Source)
at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter.initializeESB(Unknown Source)
at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter$PingTester.run(Unknown Source)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:595)
Caused by: ORABPEL-12531
Error while setting JCA WSDL Property.
Property setPassword cannot be set on oracle.tip.adapter.jms.JmsManagedConnectionFactory due to: [Caused by: Can't find bundle for base name oracle.tip.pc.infra.exception.i18n.PCExceptionList, locale en_US]
Please verify the spelling of the property.
at oracle.tip.adapter.fw.wsdl.WSDLUtils.invokeSetMethod(WSDLUtils.java:763)
at oracle.tip.adapter.fw.wsdl.WSDLUtils.setCciSpecParameters(WSDLUtils.java:665)
at oracle.tip.adapter.fw.wsdl.WSDLUtils.setupManagedConnectionFactory(WSDLUtils.java:465)
at oracle.tip.adapter.fw.wsdl.WSDLUtils.setupManagedConnectionFactory(WSDLUtils.java:421)
at oracle.tip.adapter.fw.jca.AdapterLocator.findResourceAdapter(AdapterLocator.java:195)
at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:341)
... 20 more
Can anybody provide any inputs on this error?
Thanks,
Pram

All,
Problem is solved. I changed the value for the Source directory & the adapter started to poll.
Thanx,
Homiar.

Archive file with errors in sender file adapter not working! please help!

Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopal

and go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Error in sender file adapter: source directory does not exist

Hi,
The PI system is 7.11
I've created sender file adapter with following details:
Transport Protocol : File System
Source directory: /interfaces/In
I checked in AL11 that this path really exists and it does. (I can even see the .txt file that should be processed.)
But still i get in Communication Channel Monitoring the following error:
"Configured Source directory "/interfaces/In" does not exist.
(i also tried to give the source directory as "interfaces/In" and as "//interfaces/In" but still the same error.
Any suggestions as to what is wrong?
kr
Robert

Actually, Need to use forward slash (/) to separate directory names in accordance with the Java specification.
But wanted to try if that works..
Also check directory name , path again as this is case sensitive...
--Divyesh

File to SOAP,error in sender file adapter

Hi,
I am doing a scenario FILE to SOAP where In file adapter I am using Quality od service as Exactly once in order.I am getting the below error.It works fine when I use QOS=Exactly once.Not sure why,can you guys please help me.Can we really use QOS-EOIO for sender file adapter,where exacly do we use it.
Thanks
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Edited by: guest xi on Apr 16, 2008 11:55 AM

Hi,
Thanks for your replies guys.I diid give the queue name ,I dont know what is causing the error.Now even QOS=EO which was working fine before is throwing an error.I am using the same file name for both
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Error in Inbound File Adapter

Similar Messages

Maybe you are looking for