Error in indexing connectors

Hi Experts ,
I am creating connectors via ESH_COCKPIT. I select the component EAHRGXX and under that I select HRTMC connectors individually.There are 32 HRTMC connectors that are selected at this step. When select "Create" ,there are 34 connectors selected! Other than 32 HRTMC connectors, two more connectors appear i.e. ESH_CATEGORY and ESH_CONNECTOR.
As of now I am deleting these two connectors manually but I am getting error for 9 connectors while indexing.is it because of these 2 connectors.
Could you please let me know why 2 additional connectors are appearing . though they are not selected.
Thanks,
Neha

Hi Luke,
Thanks for looking into this.
For the 9 connectors in error state , message is "Error while indexing".
Connector names can be seen in the attached snap shot.
Regards,
Neha

Similar Messages

  • Error: Error: XML Indexer: Fatal Parse error in document

    Hi,
    I was trying to add a document into using the following code:
    txn = myManager.createTransaction();               
    XmlDocumentConfig docConfig = new XmlDocumentConfig();
    docConfig.setGenerateName(true);
    myContainer.putDocument(txn, docName, content, docConfig);
    //commit the Transaction
    txn.commit();
    the content is juz a string formatted to the UTF-8 format. When I run the program, an error occurs:
    com.sleepycat.dbxml.XmlException: Error: Error: XML Indexer: Fatal Parse error in document at line 2, char 74. Parser message: An exception occurred! Type:NetAccessorException, Message:The host/address 'www.posc.org' could not be resolved (Document: docName_287), errcode = INDEXER_PARSER_ERROR
         at com.sleepycat.dbxml.dbxml_javaJNI.XmlContainer_putDocument__SWIG_3(Native Method)
         at com.sleepycat.dbxml.XmlContainer.putDocument(XmlContainer.java:736)
         at com.sleepycat.dbxml.XmlContainer.putDocument(XmlContainer.java:232)
         at com.sleepycat.dbxml.XmlContainer.putDocument(XmlContainer.java:218)
         at ag.SaveMessageinDB.addXMLDocument(SaveMessageinDB.java:157)
         at ag.SaveMessageinDB.saveMessage(SaveMessageinDB.java:58)
         at connector.TextListener.onMessage(TextListener.java:92)
         at com.tibco.tibjms.TibjmsSession._submit(TibjmsSession.java:2775)Reading message: <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <!DOCTYPE BLMNOS SYSTEM "http://www.posc.org/ebiz/blmSamples/blmnos.dtd"> at com.tibco.tibjms.TibjmsSession._dispatchAsyncMessage(TibjmsSession.java:1413)
    at com.tibco.tibjms.TibjmsSession$Dispatcher.run(TibjmsSession.java:2491)
    The XML Message that causes this problem is this:
    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <!DOCTYPE BLM31603 SYSTEM "http://www.posc.org/ebiz/blmSamples/blm3160-3.dtd">
    <BLM31603>
    <DocumentInformation>
    <documentName namingSystem="POSC pilot">Sample 2</documentName>
    <Version>
    <dtdVersion>1.0 beta</dtdVersion>
    <formVersion>BLM 3160-3 August 1999</formVersion>
    </Version>
    <reportClass>Application for Permit to Drill</reportClass>
    <filingDate>
    <year>1997</year><month>07</month><day>14</day>
    </filingDate>
    <Security>
    <securityClass>confidential</securityClass></Security>
    <BusinessAssociate>
    <Contact>
    <name>Joseph Josephson</name>
    <Address>
    <street>5847 Rushmore Dr.</street>
    <cityName>Rapid City</cityName>
    <stateName namingSystem="USCode">SD</stateName>
    <postalCode namingSystem="USZipCode">57709</postalCode>
    </Address>
    <phoneNumber>266-181-9229</phoneNumber>
    <associatedWith>Black Hills Exploration</associatedWith>
    </Contact>
    <AuthorizedPerson>
    <name>Joseph Josephson</name>
    <title>Vice President of Drilling Operations</title>
    </AuthorizedPerson>
    </BusinessAssociate>
    </DocumentInformation>
    <FieldInformation>
    <regulatoryFieldName>wildcat</regulatoryFieldName>
    <SpacingOrder>
    <spacingUnitSize unit="acre">40</spacingUnitSize>
    </SpacingOrder>
    <ContractDesignation>
    <leaseName>Dog Draw</leaseName>
    <leaseNumber>156-5799-80-89</leaseNumber>
    <unitAgreementName>WY72817</unitAgreementName>
    <leaseSize unit="acre">629.97</leaseSize>
    <indianName type="allottee">James Hickson</indianName>
    </ContractDesignation>
    </FieldInformation>
    <WellInformation>
    <apiWellNumber>510162561100</apiWellNumber>
    <wellID>Dog Draw #1</wellID>
    <wellProduct type="oil"/>
    <wellActivity type="drill"/>
    <wellCompletionType type="single"/>
    <Operator>
    <operatorName>Black Hills Exploration</operatorName>
    <Address>
    <street>5847 Rushmore Dr.</street>
    <cityName>Rapid City</cityName>
    <stateName namingSystem="USCode">SD</stateName>
    <postalCode namingSystem="USZipCode">57709</postalCode>
    </Address>
    <phoneNumber>266-181-9229</phoneNumber>
    <bondCollateralNumber>BF39002976</bondCollateralNumber>
    </Operator>
    <WellLocation>
    <LegalDescription>
    <townshipNumber direction="N">52</townshipNumber>
    <rangeNumber direction="W">68</rangeNumber>
    <sectionNumber>18</sectionNumber>
    <quarterSectionIdentifier>SE 1/4, SW 1/4</quarterSectionIdentifier>
    <locationDistance from="FSL" unit="ft">843</locationDistance>
    <locationDistance from="FWL" unit="ft">1664</locationDistance>
    </LegalDescription>
    <Geopolitical>
    <stateName>WY</stateName>
    <countyName>Crook</countyName>
    </Geopolitical>
    <RelativeFrom from="Town">
    Approximately 15 mi NW of Moorcroft, WY </RelativeFrom>
    </WellLocation>
    <wellElevationHeight referenceCode="GL">4306</wellElevationHeight>
    <WellboreInformation>
    <proposedTotalMeasuredDepth unit="ft">8500</proposedTotalMeasuredDepth>
    <proposedTotalTrueVerticalDepth unit="ft">8450</proposedTotalTrueVerticalDepth>
    <BottomholeLocation>
    <LegalDescription>
    <townshipNumber direction="N">52</townshipNumber>
    <rangeNumber direction="W">68</rangeNumber>
    <sectionNumber>18</sectionNumber>
    <quarterSectionIdentifier>SE 1/4, SW 1/4</quarterSectionIdentifier>
    <locationDistance from="FSL" unit="ft">843</locationDistance>
    <locationDistance from="FWL" unit="ft">1664</locationDistance>
    </LegalDescription>
    <Geopolitical>
    <stateName>WY</stateName>
    <countyName>Crook</countyName>
    </Geopolitical>
    <RelativeFrom from="LeaseLine">
    843 ft from nearest property or lease line</RelativeFrom>
    </BottomholeLocation>
    <operationStartDate>
    <year>1997</year><month>8</month><day>8</day></operationStartDate>
    <estimatedDuration unit="days">37</estimatedDuration>
    <drillingTool type="rotary"/>
    </WellboreInformation>
    </WellInformation>
    <ProposedCasingProgram>
    <CasingInformation type="conductor">
    <drillBitDiameter>12 5/8</drillBitDiameter>
    <tubularOutsideDiameter>9.5</tubularOutsideDiameter>
    <tubularWeight unit="lb/ft">52</tubularWeight>
    <tubularGradeCode>C-22</tubularGradeCode>
    <baseMeasuredDepth unit="ft">3477</baseMeasuredDepth>
    <Cement>
    <cementQuantity unit="sacks" type="Eugene">97</cementQuantity>
    <cementSlurryVolume unit="ft3">1287</cementSlurryVolume>
    <cementSlurryYield unit="ft3/sack">13.1</cementSlurryYield>
    <additive>Rock Salt</additive>
    <additive>carcinogenic biophages</additive>
    <topMeasuredDepth unit="ft">87</topMeasuredDepth>
    </Cement>
    </CasingInformation>
    <CasingInformation type="intermediate">
    <drillBitDiameter>8 7/8</drillBitDiameter>
    <tubularOutsideDiameter>8.125</tubularOutsideDiameter>
    <tubularWeight unit="lb/ft">43</tubularWeight>
    <tubularGradeCode>D-220</tubularGradeCode>
    <baseMeasuredDepth unit="ft">9112</baseMeasuredDepth>
    <Cement>
    <cementQuantity unit="sacks" type="Portland">82</cementQuantity>
    <cementSlurryVolume unit="ft3">1003</cementSlurryVolume>
    <cementSlurryYield unit="ft3/sack">13.1</cementSlurryYield>
    <stageCementerMeasuredDepth unit="ft">6633</stageCementerMeasuredDepth>
    </Cement>
    <Cement>
    <cementQuantity unit="sacks" type="Seattle">116</cementQuantity>
    <cementSlurryVolume unit="ft3">1504</cementSlurryVolume>
    <cementSlurryYield unit="ft3/sack">13.1</cementSlurryYield>
    <additive>mucilaginous algal-based slime</additive>
    <stageCementerMeasuredDepth unit="ft">3483</stageCementerMeasuredDepth>
    </Cement>
    </CasingInformation>
    </ProposedCasingProgram>
    <reportRemark>Black Hills Exploration has a Statewide Bond. Bond # BF39002976</reportRemark>
    <reportRemark>Drilling Program and Surface Use Plan attached.</reportRemark>
    </BLM31603>
    Many Thanks in advance for your help!
    :)

    hi, I also have same problem. I wanna to putDocument dblp.xml in the created container by using dbxml shell commands
    I faced this error:
    "stdin:18: putDocument failed, Error: Error: XML indexer: Fatal parse error in document at line 1, char 1. Parser message: invalid document structure <Document: dbp.xml>"
    the content of theat xml file is:
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE dblp SYSTEM "file: dblp.dtd">
    <dblp>
    <mastersthesis mdate="2006-04-06" key="ms/Vollmer2006">
    <author>Stephan Vollmer</author>
    <title>Portierung des DBLP-Systems auf ein relationales Datenbanksystem und Evaluation der Performance.</title>
    <year>2006</year>
    <school>Diplomarbeit, Universit&auml;t Trier, FB IV, Informatik</school>
    <url>http://dbis.uni-trier.de/Diplomanden/Vollmer/vollmer.shtml</url>
    </mastersthesis>
    <mastersthesis mdate="2002-01-03" key="ms/Brown92">
    <author>Kurt P. Brown</author>
    <title>PRPL: A Database Workload Specification Language, v1.3.</title>
    <year>1992</year>
    <school>Univ. of Wisconsin-Madison</school>
    </mastersthesis>
    </article>
    <article mdate="2003-11-19" key="journals/ai/Todd93">
    <author>Peter M. Todd</author>
    <title>Stephanie Forrest, ed., Emergent Computation: Self-Organizing, Collective, and Cooperative Phenomena in Natural and Artificial Computing Networks.</title>
    <pages>171-183</pages>
    <year>1993</year>
    <volume>60</volume>
    <journal>Artif. Intell.</journal>
    <number>1</number>
    <url>db/journals/ai/ai60.html#Todd93</url>
    </article>
    <article mdate="2003-11-19" key="journals/ai/KautzKS95">
    <author>Henry A. Kautz</author>
    <author>Michael J. Kearns</author>
    <author>Bart Selman</author>
    <title>Horn Approximations of Empirical Data.</title>
    <pages>129-145</pages>
    <year>1995</year>
    <volume>74</volume>
    <journal>Artif. Intell.</journal>
    <number>1</number>
    <url>db/journals/ai/ai60.html#Todd93</url>
    </article>
    </dblp>
    could you please help me.
    here or send me to this address please:
    [email protected]
    Thanks,
    Mohsen

  • Report error: ORA-06502: PL/SQL: numeric or value error: NULL index table k

    Hi everybody,
    I have two Distinct Databases on two distinct servers. (Oracle Ent. Release 10.2.0.3.0 on AIX 5.3). After I install the latest patch last week, One of the APEX installation has some problems on Home>Application Builder Page. The error message is very random and
    report error:
    ORA-06502: PL/SQL: numeric or value error: NULL index table key value.
    When i change the view (details to icons), everything goes to normal. This error message is reflected some of the pages (report region) of some of my applications randomly. When it appears in a report region, i deselect the order method of the region, the result is normal.
    But the other APEX application on the other instance has no problem. It is a bug? or Should i re-install the APEX instance?
    Thank you for your interest?
    Gökhan ÇATALKAYA

    No, but we have a reproducible test case now so we're working on it. See ORA-06502: PL/SQL: numeric or value error: NULL index table key value
    Scott

  • CR XI R2 JRC: Error loading database connector (driverImpl.DriverLoader)

    Hello!
    I developed a report with CR XI R2 SP6 Designer that uses native XML.  Everything in the report seems to be fine...in the preview of my report, all data looks correct.
    When trying to review the report with the JRC thick client ReportViewerBean, I get the following error just as the report is about to be displayed:
    Error loading database connector.  The class 'com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader' could not be accessed.
    I went through about ten or so previous threads about this error, but none of the solutions are working for me.
    I'm using NetBeans to develop and debug, and I have CrystalDatabaseConnector.jar added to my project libraries, and I can view the class com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader in the NetBeans object browser.
    Some of the posts I viewed mention a different jar for this DriveLoader class.  Is there something wrong with the version of CrystalDatabaseConnector.jar that I have?  Do I need an updated jar?  Does this jar rely on another jar that might be missing? I've been through the jar list in the CR XI R2 JRC deployment guide pdf, but I just don't see that I'm missing anything.
    Thanks for any suggestions!
    Edited by: Joseph Huber on Mar 9, 2010 2:00 AM

    Some stuff from the Java Console...
    - Formula {@DesiredEFT} compiled.
    - Formula {@DesiredLFT} compiled.
    - Formula {@DesiredGPM} compiled.
    - Done loading report.
    - Time to load report T:\USGD_Share\PCVOLS1\source\java\CRViewerTest\crDxProposal1.rpt took 160346 ms
    Crystal Report Viewer 2.1.21.2
    java.vendor = Sun Microsystems Inc.
    java.version = 1.6.0_16
    os.name = Windows XP
    os.version = 5.1
    os.arch = x86
    - JRCAgent1 received request: queryServerCapabilitiesRequest
    - Export Supervisor: loading available exporters
    - Export Supervisor: found 6exporters
    - Export Supervisor: loading exporter com.crystaldecisions.reports.exporters.format.page.pdf.PDFExporter
    - Export Supervisor: loading exporter com.crystaldecisions.reports.exporters.format.page.rtf.RTFExporter
    - Export Supervisor: loading exporter com.crystaldecisions.reports.exporters.format.report.crystalreports.CRExporter
    - Export Supervisor: loading exporter com.crystaldecisions.reports.exporters.format.record.sepv.SEPVExporter
    - Export Supervisor: loading exporter com.crystaldecisions.reports.exporters.destination.disk.DiskExporter
    - Export Supervisor: loading exporter daviss.jeff.cellexporter.CellExporter
    - Export Supervisor: fail to load exporter (stack trace follows).  This warning is only a problem if the exporter that failed to load is supported in a given project.daviss.jeff.cellexporter.CellExporter
    java.lang.ClassNotFoundException: daviss.jeff.cellexporter.CellExporter
            at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
            at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
            at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
            at java.lang.Class.forName0(Native Method)
            at java.lang.Class.forName(Class.java:169)
            at com.crystaldecisions.reports.formatter.a.c.char(Unknown Source)
            at com.crystaldecisions.reports.formatter.a.c.case(Unknown Source)
            at com.crystaldecisions.reports.formatter.a.c.for(Unknown Source)
            at com.businessobjects.reports.sdk.b.i.do(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.ReportSource.getServerCapabilities(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getServerCapabilities(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getServerCapabilities(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.rs.a.t(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.rs.a.<init>(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.rs.RSReportChannelFactory.newReportChannel(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.bi.a(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.bi.a(Unknown Source)
            at com.crystaldecisions.ReportViewer.ReportViewer$1.a(Unknown Source)
            at com.businessobjects.crystalreports.viewer.applet.h.run(Unknown Source)
            at java.lang.Thread.run(Thread.java:619)
    - JRCAgent1 received request: fetchReportPageRequest
    - JRCAgent1 attempting to acquire license
    - JRCAgent1 successfully acquired license
    - JRCAgent1 detected an exception: Error loading database connector.  The class 'com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader' could not be accessed.
            at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
            at com.businessobjects.reports.sdk.b.i.if(Unknown Source)
            at com.businessobjects.reports.sdk.b.i.a(Unknown Source)
            at com.businessobjects.reports.sdk.b.i.byte(Unknown Source)
            at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
            at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(Unknown Source)
            at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPage(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.rs.b.if(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.av.a(Unknown Source)
            at com.businessobjects.crystalreports.viewer.core.av.run(Unknown Source)
            at java.lang.Thread.run(Thread.java:619)
    - JRCAgent1 releasing license
    Error loading database connector.  The class 'com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader' could not be accessed.

  • ColdFusion 11 wsconfig.exe -- Error while configuring connector for IIS.

    I ran into a problem with my ColdFusion 11 64-bit installation/migration on a Windows Server 2012 R2/IIS 8.5.  I was following the ColdFusion 11 Lockdown Guide - Pete Freitag (very helpful) and I ran into problems on page 35 "Run the ColdFusion Web Server Configuration Tool".  When I attempted to do this for ALL IIS websites I encountered a Windows error [APPCRASH - Exception Code:c0000005].  Also, note my Administrator-Command Prompt window provided this error message "Error while configuring connector for IIS. Make sure you have administrator privileges".  However, I did not experience this error with all of the migrated sites.  I traced my steps backward to discover the problem.  I used the Microsoft Web Deployment tool (good tool) to migrate the old IIS websites to the new IIS.  I utilized Metabase Explorer the IIS 6.0 Resource Tools to discover that some of the migrated sites that were crashing did not have the key/value ID:6006 | Name: DefaultDoc.  Once I added this key and redeployed the site the ColdFusion 11 connector (wsconfig.exe) worked fine.  In addition, I added this key/value to some of the larger previously migrated sites in IIS 8.5 ("Default Document") and it worked with the connector as well. 
    Knowing how IIS encapsulates information the DefaultDoc key/value should have passed from the website setting.  Why would this make wsconfig.exe crash?
    Thanks in advance and I hope this saves someone from hours of research and frustration.

    DiscoDelight,
    Have you forwarded this information directly to the ColdFusion product team?  If not, I'll try to draw their attention to it.  Only a few of them are active on these forums, so this issue might be overlooked.
    -Carl V.
    EDIT: I just pinged them on Twitter to take a look at this post.
    EDIT #2: They just pinged me back that they are looking into it.

  • Error: ORA-06502: PL/SQL: numeric or value error:NULL index table key value

    Hi,
    I am trying toceate an interface which collects data from database make some transformation and populated seeded tables in the same database.
    My Approach is :
    a) Create a record type variable ( concists of multiple segments)
    b) Create a pl/sql table type of the records type in a)
    c) Created a cursor of same structure as pl/sql table type ( collects data)
    d) BULK CoLLECT data from cursor into pl/sql table
    e) Print the data
    But during Bulk Collect i get the below error :
    Unexpected error in xxc_hr2hr_populate_elements.main at FLOW TRACE-1.120. Error: ORA-06502: PL/SQL: numeric or value error: NULL index table key value
    ORA-20003: Unexpected error in xxc_hr2hr_populate_elements.get_data at FLOW TRACE-1.1.100. Error: ORA-06502: PL/SQL: numeric or value error: Bulk Bind: Truncated Bind

    Ashish_Apps wrote:
    Hi,
    I am trying toceate an interface which collects data from database make some transformation and populated seeded tables in the same database.
    My Approach is :
    a) Create a record type variable ( concists of multiple segments)
    b) Create a pl/sql table type of the records type in a)
    c) Created a cursor of same structure as pl/sql table type ( collects data)
    d) BULK CoLLECT data from cursor into pl/sql table
    e) Print the data
    But during Bulk Collect i get the below error :
    Unexpected error in xxc_hr2hr_populate_elements.main at FLOW TRACE-1.120. Error: ORA-06502: PL/SQL: numeric or value error: NULL index table key value
    ORA-20003: Unexpected error in xxc_hr2hr_populate_elements.get_data at FLOW TRACE-1.1.100. Error: ORA-06502: PL/SQL: numeric or value error: Bulk Bind: Truncated BindVerify the rows you are fetching are having the same data types as your Record like Dates should go to date , decimal should not be fetched in type defined as number etc.

  • Error in LDAP Connector

    hi,
    Our idm use HCM,  so I try to use LDAP retrieved HR data. The JCo of Our idm and the ABAP RFC typed T run smoothy. When I start LDAP connector, it tells "Error starting LDAP Connector at operating system level".  In ST11, it reads follow:
       ======> JCO.Server could not find server function 'LDAPRFC_LOAD'
      ABAP Programm: SAPLSLDAP_CCMS (Transaction: LDAP)
      Called function module: LDAPRFC_LOAD
    I can't find the funtion LDAPRFC_LOAD.
    Is there any one can tell me a good method to solve it? Thanks very much!
    lily

    Forget to install LDAP Client at HCM OS

  • CDS-18010 Error:A Index and a index with the same name

    Hi
    I am facing strange error is some one expert there to help me to get rid of this error.
    CDS-18010 Error:A Index and a index with the same name 'LA_SP_FK_1' have been asked to be created.
    I am generating tables from Data model diagram & getting this error.
    Thanks,
    Vijay

    Your Right!!
    Designer does not like 2 of the same name.
    there are several bugs on the same name issue and CDS-18010
    Bug.3973155/3443005 (92) CDS-18010 IN CAPTURING A TYPE WITH CONSTRUCTOR FUNTIONS IN ITS BODY:
    Bug.2586582 (93) CDS-18010 A DOMAIN AND A DOMAIN WITH THE SAME NAME 'D1' BEEN ASKED TO CREATE:
    Bug.2561625 (15) CDS-18010 GENERATION OF TWO SYNONYMS WITH SAME NAME BUT DIFFERENT SCOPE:
    Bug.2072505 (93) CDS-18010 CAPTURING 2 TRIGGERS WITH SAME NAME ON ONE TABLE SHOULD BE A WARNING:
    Bug.1689800 (90) CDS-18010 PLSQL WITH THE SAME PROCEDURE NAME ALREADY EXISTS:
    Bug.1073311/1029997 (96) CDS-18010 ERROR ATTEMPTING TO CREATE 2 PROCEDURES WITH SAME NAME:
    Just to name a few.
    I would suggest you change the name.
    Michael

  • ORA-06502: PL/SQL: numeric or value error: NULL index table key value??

    Hi,
    Can anyone let me know what is the issue on below code and how can we avoid that? i am getting the error like below
    ORA-06502: PL/SQL: numeric or value error: NULL index table key value
                        v_while_loop := 1;
                        v_delete_char_id := v_tabtype_result_values.FIRST;
                        WHILE v_while_loop <> v_tabtype_result_values.COUNT
                        LOOP
                            IF check_duplicate_nc_data (v_result_view,
                                                        v_tabtype_result_values(v_delete_char_id).value,
                                                        v_collection_id,
                                                        v_occurrence,
                                                        v_plan_id,
                                                        v_delete_char_id
                            THEN
                                DBMS_OUTPUT.PUT_LINE(v_delete_char_id);
                                v_tabtype_result_values.DELETE(v_delete_char_id);
                            ELSE
                                DBMS_OUTPUT.PUT_LINE(v_delete_char_id||','||v_tabtype_result_values(v_delete_char_id).id||','
                                                        ||v_tabtype_result_values(v_delete_char_id).value||','
                                                        ||v_tabtype_result_values(v_delete_char_id).validation_flag
                            END IF;
                            v_while_loop := v_while_loop + 1;
                            v_delete_char_id := v_tabtype_result_values.NEXT(v_delete_char_id);
                        END LOOP;

    Change:
    WHILE v_while_loop &#60;&#62; v_tabtype_result_values.COUNT to
    WHILE v_while_loop <= v_tabtype_result_values.LASTSY.

  • ORA-06502: PL/SQL: numeric or value error: NULL index table key value Repor

    W've been experiencing the Oracle Error: ORA-06502: PL/SQL: numeric or value error: NULL index table key value Report’ [we are currently on apex v3.0.1]. From the forum there was a reference to a bug fix: apex bug (6416829) fixed in 3.1. When we view '6416829' in Metalink we can see the bug title but cannot see any details as it's protected. Can anyone shed some light on why it's protected or provide further details.
    We have many LIVE customers reporting this error and we want to be certain it's fixed in v3.1.
    (currently we are working around this by flushing the shared pool but this is not ideal).
    Any help would be appreciated.

    Scott,
    This error has been thrown several times in the past 24 hours. Yesterday several of my reports threw the error, these reports have done so in the past. This morning APEX has begun throwing the error of which I have seen only once before. This is occuring at Home>Application>My Application. The error appears when I attempt to View the report in Details mode, is OK when I view the report in Icons mode. The error is occuring in my Prodution environment which has not been updated since 2/25/2009.
    As before, I edited the SQL on my application's reports and the error then disappeared.
    We are running Application Express 3.2.0.00.27 and Oracle Release 10.2.0.1.0. My browser is IE 7.0.
    Plan to test later with FireFox provided I can download it to see if this might browser related.
    Any inforamtion or guidance is appreciated.
    Jeff

  • Macbook numbers 2.1(436) will not open the project from Numbers APP on iPad 2.1(1129) .  The error is "index.html is missing"

    I updated the numbers APP on my iPad to 2.1(1129) and my Macbook numbers 2.1(436) will not open the project.  The error is "index.html is missing".
    I think I am having compatibility issues also with my numbers files but the symptom started last week. I have a numbers project/file that has been shared between my iPad and Macbook for several months so I would believe there is no compatability issue with the content.  I updated the Numbers APP on my iPad to 2.1(1129) and my Macbook (numbers is current) on 2.1(436) will not open it. I used email the iTunes to transfer the project file. The error is "index.html is missing".
    I used ftp to get both a previous file that will open and the new one that will not open onto a server at work and unzipped them. The file format is very different. Indeed the old one has an index.html and the new one has an index directory with a set of files. I know that you can not believe everything you read online but I did see a blurb that Numbers 3 does not need the index.html file but has no other specifics on the files format.
    Am I a victim of the 2.1 verson on my iPad not being compatable with the 2.1 version on my Macbook?
    Am I now forced to buy a new iWorks or Numbers 3 becasue I updated the iPad APP?
    I wanted to find the answer before I purchased a new Numbers if that was not the problem.

    Thank you for the insight that the new iPad 2.1 version requires Numbers3 BUT that is not a conclusion I would have jumped to being both are 2.1? Go figure.
    You however I do not believe you are correct with the conclusion that I can get a Numbers upgrade. I am on OS X 10.6.8 so not only do I need a new OS, I need a new macbok to run it, according to the APP store it requires OS X 10.9 or greater.
    I would like to have known that Numbers 2.1 iOS is not compatable with numbers 2.1 OS X and not taken the APP update.

  • Getting error "URI index 0 is not valid" in Oracle Service Bus

    Dear Friends,
    I am receiving an error "URI index 0 is not valid" while executing Customization File in Oracle Service Bus. I am not able to figure out why it is happening. Please help.
    Thank you.
    Regards,
    Palak Mathur

    AbhishekJ wrote:
    Change the:
    <xt:value>
    <tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
    <URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>
    <weight>1</weight>
    </tableElement>
    </xt:value>Section to:
    <xt:value>
    <tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
    <tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>
    <tran:weight>1</tran:weight>
    </tran:tableElement>
    </xt:value>in your Customization File and try again.Hi Abhishek,
    I did the same thing. Actually, the deployment team was getting this error and they called me up to find out. I analyzed and sent the following response:-
    I was going through the Customization file. I removed all the elements from the file and started with only 1 envValueAssignments:-
    +<cus:envValueAssignments>+
    +<xt:envValueType>Service URI Weight</xt:envValueType>+
    +<xt:location>0</xt:location>+
    +<xt:owner>+
    +<xt:type>BusinessService</xt:type>+
    +<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
    +</xt:owner>+
    +<xt:value xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema">0</xt:value>+
    +</cus:envValueAssignments>+
    The customization file got executed perfectly. Then I added another envValueAssignments and it worked fine as well.
    Now, when I added
    +<cus:envValueAssignments>+
    +<xt:envValueType>Service URI Table</xt:envValueType>+
    +<xt:location xsi:nil="true"/>+
    +<xt:owner>+
    +<xt:type>BusinessService</xt:type>+
    +<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
    +</xt:owner>+
    +<xt:value>+
    +<tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
    +<URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>+
    +<weight>0</weight>+
    +</tableElement>+
    +</xt:value>+
    +</cus:envValueAssignments>+
    +, I got the above error, ie URI index 0 is not valid. If you check each element then you will know that tableElement defines a namespace as xmlns:tran="http://www.bea.com/wli/sb/transports" which is neither being used by the node nor its child elements. Also the error in server logs was:-com.bea.wli.sb.transports.TransportException: URI index 0 is not valid.+
    It stuck that we were doing something wrong here. I checked other elements in the same file and found that some of them were starting the node as <tableElement xmlns="http://www.bea.com/wli/sb/transports">. So, tableElements should be qualified with this namespace:-http://www.bea.com/wli/sb/transports. It was clear there was issue with qualified name of the element and hence I added the prefix "tran" and made entry as:-
    +<tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
    +<tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>+
    +<tran:weight>0</tran:weight>+
    +</tran:tableElement>+
    When I executed the changed customization file it worked. I checked with few more elements and they all worked making me sure that this was the error.
    So, the issue was that the OSB was not able to find any URI and for index 0 there was no URI available. Hence we were getting a weird error which was not at all user friendly. However, while making the OSb they must have thought that no one will make any manual changes (by hand in the file) and this error would be sufficient to tell that there is something wrong with the customization and we must regenerate the customization file.
    Only solution that we do not receive this error in future is rather than making changes to the customization file manually we should use OSB console or scripts to replace the properties. Otherwise we need to be very careful while touching the Customization file.
    Hope this helps.

  • -9041:system error(BD Index is not accessing)

    hi all,
    -9041:system error(BD Index is not accessing),
    i am not able to import the software component from SLD to IR.
    Thanks & regards,
    subba reddy

    solved my problem.
    thanks,
    subba reddy

  • How do i fix this: error message- index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the ser

    that is...
    index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
    File activity incomplete. 1 file(s) or folder(s) were not completed.
    Files with errors: 1
    index.html
    thanks!

    It's under More Options triangle in the Manage Sites panel.  See screenshot:
    Nancy O.

  • Unexpected internal error near index 1

    Hi,
    I am convering al l occurance of "\" into "/" in a string.
    private String format(){
            input="java\\software\\";
            System.out.println("Before formating, input:" + input);
            try{           
                input=input.replaceAll("\\", "/");
                System.out.println("After formating, Input:" + input);
            }catch(Exception e){
                System.out.println("Error in formatting:" + e.getMessage());
            return input;
        }And I am getting this Error:
    Unexpected internal error near index 1
    Any idea whats wrong with above code?

    If you want to replace two backslashes with asingle
    forward slash, then you need to specify the former
    (as a regular expression) as "\\\\"OH! Thanks. I got another way and its working.
    I am using
    s.replace('\\', '/'); insteadd of
    replaceAll
    Yes, that's definitely better in this case, since that API is simpler for single-char replacements. If you sometime need to replace strings though (back to the replaceAll) you'll need to be aware of how regular expressions are formed and how the backslash character plays a part in forming them.

Maybe you are looking for

  • Need help with almost completed plugin engine project

    Hi all, For a while now I have been working on a plugin engine. After a few iterations, the engine is similar to the Eclipse engine, in that plugins use extension points and extensions to allow contributions. Unlike the eclipse engine I have added th

  • Client side validation with submit button in another region

    Hi, I have two regions, one containing a form with input texts for the user to fill in, and another region with a command button. A few of the input fields use the ADF "required" validator. My problem is that when I click the submit button, and it do

  • Switching from a pc?

    so, today i just purchased my first macbook comuputer (yaaaay) and i was told by a few friends that switching from a pc to a mac would be easy. i talked to one of my friends who walked me through importing some of my photos from an external hard driv

  • Why does the program panel fail to match magnification of source panel?

    The magnification and resolution settings for both program & source panels are identical. However, the magnification on the program panel is much higher than the source. The rendered video, of course, is produced with the higher magnification thereby

  • Basic File Sharing question between user accounts on my iMac

    I don't understand how to be able to share and download to one common folder among User Accounts on my iMac. I am trying to use a Clean Account as a test, and wanted to copy a file I downloaded from the web in one account into this clean account fold