Error in invoice calculation scheme
Hi dears
I have two calculation schemes ZXXX3 and ZXXX31. The second one was created as a copy of ZXXX3, nothing was changed in it.
I assign the new scheme ZXXX31 to my sales area, create sales order and then create invoice via vf01 for this order without problem.
Then I assign the old scheme ZXXX3 to the same sales area instead ZXXX31, create sales order and try to create an invoice. But I can't save it because is shows me an error "interface RW: document data header are inconsistent for updating"
ECC6.0 system
I have equal sales area, customer, material, data and so on. I have difference only in scheme name. The condition exclusion rules are the same for both schemes.
Hi, Phanikumar
I check these schemes in the test system, there fore I can take the same customer / material / quantity / organization data and so on. The pricing procedure is the same in sales order and in invoice.
The invoice is hitting RW because the accounting document is created with reference to invoice, e.g.
Account determination is definited in calculation scheme by accounting key ERL:
The condintions ZPR1 and ZR02 are in different exclusion groups
and these excluding groups are assugned to both calculation schemes.
I've found that if I delete ZR02 condition from ZXXX3 cheme it begins to work. But ZXXX31 works with this condition properly. The scemes were created as copy of each other.
Similar Messages
-
Maintain the acct key and accruals/provisions in the calculation schema
Dear All,
I have a problem during invoice posting.
I create a new freight condition type & assigned it to the calculation schema. I also create a new account key & assigned to the calculation schema in accrual keys. Then done OBYC settings. During MIGO, its working fine. But when i post the Miro against po, giving an error msg., "Maintain the acct key and accruals/provisions in the calculation schema, Message no. M8434"
plz help me to solve this issue.Have you ticked the 'Acruals' in control data 2 in M/06 for this condition.
Regards,
Piyush -
Maintain the acct key and acurals/provisions in calculation schema-MIRO
Hi,
In PO we have maintained different delivery condition.
When we are doing MIRO we are getting error "maintain the acct key and acurals/provisions in calculation schema" for condition type YLBB and YLBE.
However we have checked condition type and calulation schema and found that acct key and accurals maintained.
YLB9 BivacInspec.fee/Quan
YLBB LPRC charges/Quant.
YLBC Port charges/Quant.
YLBE Clearing Charges/Qt.
Please suggest somesolution.
Thanks
AshokHi Ashok,
In M/08 check whether acct key and acurals/provisions in calculation schema" for condition type YLBB and YLBE are maintained or not.
Also if they are maintained there then check in M/06 for condition type YLBB and YLBE , whether accurals check box are checked or not...If not check and then try.
Cheers!!!
Utsav -
PRICING PROCEDURE-CALCULATION SCHEMA
Dear All,
There are some queries regarding pricing procedure calculation schema.Please help me out:
1) What is the use of the "Requirement" column in calculation schema in real time scenario?
2) What is meant by "Alternative calculation type" and "Alternative base value" column?What is its use in real time scenario?
3) In the Print column if we place "X",it says "Printing at item level (previous procedure)".What does this actually means?
4) What is the use of "Accurals" and what effect does it have in the pricing procedure and pricing calculation?
For all the above queries some real time scenario example willbe highly appreciable.
Regards,
Indranil1) What is the use of the "Requirement" column in calculation schema in real time scenario?
Requirement
Use
If the requirement is fulfilled (SY-SUBRC = 0), then output
determination also takes into consideration output type or the access
sequence, for which the requirement has been specified.
Examples
A possible requirement would be, for example, that a difference shoul
be made between document currency and local currency .
Definition
Number of a subroutine (= form routine), that checks a requirement at a
specific time.
Use
The standard SAP system contains some standard routines for checking
requirements when copying. You can also define your own routines
according to the needs of your company.
Example
If you copy a quotation to a sales order, the system can check every
quotation item to ensure that the customer had not rejected them for any
reason.
2) What is meant by "Alternative calculation type" and "Alternative base value" column?What is its use in real time scenario?
If you are using any Formula to Derive the Condition Type then you can use Alternative formula to the formula in the standard system that
determines a condition.
Alternative formula for condition base value
Formula for determining the condition basis as an alternative to t
standard.
Example
An absolute header discount is, for example, distributed in the st
system according to the cumulative value of the items.
If the system, however, distributes the absolute header discount
according to volume, a header discount of $30 results in the follo
discounts:
Item Value Volume Discount
Stand. disc. Volume disc.
1 $1000 2 cbm $20 $10
2 $500 4 cbm $10 $20
3) In the Print column if we place "X",it says "Printing at item level (previous procedure)".What does this actually means?
If you Put 'X" , it will be shown in the Print Output..
Print ID for condition lines
Controls issue of condition lines when printing documents such as order
confirmations or invoices.
Use
In releases previous to 4.0, the following print indicators are
available :
o ' ' : Condition line is not printed
o 'X' : Condition line is printed at item level
o 'S' : Condition line is printed in totals block
The following standard logic is set out for these printing indicators: -
Article Purchasing tax P8 calculation schema
Please help with following situation:
1 Purchasing Org for several Comp Codes
Purchasing Org is not assigned to any of them
Purchasing Info Records are created at Purchasing Org level
When tax code P8 is entered for VAT, system issues following error no. 06388:
==========
Not possible to set tax code without tax calculation schema
Message no. 06388
Diagnosis
The system was not able to find an assignment of the entered tax code to a tax calculation schema, because either
no company code has been maintained for the purchasing organization, or
no tax calculation schema has been maintained for company code of the relevant plant.
Procedure (system administrator):
In the second case (no tax calculation schema maintained) define a calculation schema for the country of the company code via the Financial Accounting Customizing facility.
==========
Of course, Tax calculation schema is assigned to country and tax code also is assigned to specific country.
Is there any ways to fix this, except PIR creation at Plant level?You can create the Reg Info with the Plant and this message will not happens...
-
Error in activating Calculation view
Hi Gurus,
Please help me in resolving this issue below as I get an error when activating calculation view.
Internal deployment of object failed;Repository: Encountered an error in repository runtime extension;Internal Error:Unable to create hierarchy view: CREATE COLUMN VIEW
SQL: transaction rolled back by an internal error: identifier is too long: the identifer
description" is too long. Maximum length is 127:
I have checked all content related to this error but not able to find a solution.
Please adviseThough your calc view name could be small, the 'fully qualified' calculation view name could be bigger than 127 character.
Fully Qualified name = <packagename.packagename.packagename.....>/<calc view name>
For each calc view that you activate, HANA internally creates more than one column views (based on your attributes) which are found under the _SYS_BIC schema and there it will fail if the column view name is exceeding 127 characters.
Solution: make sure the fully qualified name is not too big
Regards,
Sesh -
User Exit for PO Calculation Schema Determination by PO Document Type
Hello,
Due to complex pricing requirements for both standard inbound purchase orders and return to vendor purchase orders, we need two separate calculation schemas to be applicable to each vendor.
I have configured the primary calculation schema (ZM1000) which is correctly calculated on our standard purchase orders. Through ENHANCEMENT-POINT mepo_header_fill_neu_01 SPOTS es_saplmepo (program SAPLMEPO) we have implemented code to change the calculation schema to the return schema (ZM1002) if the document type is one of our return purchase order types.
ENHANCEMENT 1 ZMEEI_PO_PRICE_SCHEMA_DETM. "active version
IF fekko-bsart eq 'ZR1' or fekko-bsart eq 'ZR2' or fekko-bsart eq 'ZR3' or fekko-bsart eq 'ZR4' .
fekko-kalsm = 'ZM1002'.
ENDIF.
ENDENHANCEMENT.
We are facing an issue where once the data is correctly entered into the return PO and the pricing has been determined there are errors. The following is observed in the pricing analysis:
1) The correct calculation schema is determined (ZM1002).
2) Pricing conditions which have a condition record under the main calculation schema (ZM1000), but which do not exist in the return one (ZM1002) still appear in the pricing. This is an issue.
3) Price conditions which have a condition record under the new schema (ZM1002), and which should appear, receive the message "Condition record exists, but has not been set". This is an issue.
When the pricing is re-determined manually at the line item level, it recalculates correctly and issues 2 and 3 above are adjusted accordingly.
Question:
Is there something missing in our code above which is cause these issues or is there a better user exit we should be using to address this requirement?
Thanks in advance!Melih
What we ended up doing was using ENHANCEMENT-POINT item_process_main_01 SPOTS es_saplmepo (program SAPLMEPO) to re-price the line items automatically when processing. This solved our issue.
IF EKKO-BSART = 'ZR1' or EKKO-BSART = 'ZR2' or EKKO-BSART = 'ZR3' or
EKKO-BSART = 'ZR4'.
lf_ext_calctype = 'C'.
ENDIF. -
Quantity entered larger than quantity to be debite
Error handling for work item 000011592049
Canceled by user
Canceled by user
Quantity entered larger than quantity to be debite
Hi All,
I am gettin the above error in invoice workflow. Can anyone tell me what could be the reason?
Regards,
RajI solved the error using these parameters:
Evaluation ID 3EV_IN_600_000
Process level schema 3C_IN_600_000
Level type S Automatic
Task ID 40007988
Decision type 1 Decision for Entire Document. -
Tax calculation schema / PIR
Experts,
I like to create a PIR (ME11) for purch. org. 0815 without plant. Purch. org 0815 is assigned to two plants 0100, 0200.
Once I try to save the PIR I get the error "Not possible to set tax code without tax calculation schema".
Where can I create / maintain the tax calculation schema ?
Thanks in advance
JörgHi,
I raised question in MM.
Thanks
Jörg -
Error while Registering XML Schema
Hi Team,
The mail purpose of my project is to load data from XML feed file into Oracle tables. I did following steps which went perfectly fine ...
I did following steps.
1)create DIRECTORY xml_dir as 'c:\xmldata';
2) create table xmltab of XMLType;
3) Following packages are executed through "Sys" Schema
1)dbmslob.sql;
2)prvtlob.plb;
4) An xmldata folder is created under "c:\" and file with data_file.xml is stored in it.
5) insert into xmltab values(XMLType(bfilename('XML_DIR ','data_file.xml'), nls_charset_id('AL32UTF8')));
When I try to execute following select statment "No Rows Selected" message is displayed; although there is one element in xml data file.
SELECT OBJECT_VALUE
FROM xmltab
WHERE existsNode(OBJECT_VALUE, '/ConsolidatedAssetHeader[AssetSourceSystem= "CAPS"]')=1
Now I think in order to use all functions like existsNode and exctractValue I will have to register Schema in DB.
Following is the XML Schema file.
<xsd:schema targetNamespace="schemas-dart-com:sql:ConsolidatedAssetHeader" xmlns:schema="schemas-dart-com:sql:ConsolidatedAssetHeader" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
- <xsd:element name="ConsolidatedAssetHeader">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="InternalId" type="sqltypes:int" />
- <xsd:element name="DCN">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="30" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="EventDateLastChanged" type="sqltypes:datetime" minOccurs="0" />
- <xsd:element name="FinancialStatusIndicator" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="InScopeIndicator" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationPriorityIndicator" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="PhysicalInstallDate" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetComment" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="255" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetContractExtension" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetContractNumber" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetDescription" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetFinancialInstallDate" type="sqltypes:datetime" minOccurs="0" />
<xsd:element name="AssetFinancialRemovalDate" type="sqltypes:datetime" minOccurs="0" />
- <xsd:element name="AssetFinancialStatus" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetName" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="255" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetParentSource" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetParentSourceID" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetPhysicalInstallDate" type="sqltypes:datetime" minOccurs="0" />
<xsd:element name="AssetPhysicalRemovalDate" type="sqltypes:datetime" minOccurs="0" />
- <xsd:element name="AssetPhysicalStatus" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetPhysicalStatusIndicator" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetSerialIndicator" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetSerialNumber" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetSource" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetSourceID" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetSourceIndicator" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetSourceSystem" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetSourceType" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetTag" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="BillabilityIndicator" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="InScopeFlag" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="IPAddress" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="NetworkNumber" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="SubnetAddress" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element ref="schema:ConsolidatedAssetLocation" minOccurs="0" maxOccurs="unbounded" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
+ <xsd:element name="ConsolidatedAssetLocation">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="InternalId" type="sqltypes:int" minOccurs="0" />
<xsd:element name="ParentId" type="sqltypes:int" minOccurs="0" />
- <xsd:element name="AssetLocationIDBillTo" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetLocationIDShipTo" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetLocationIDSoldTo" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetSourceDt" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetSourceIDDt" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="AssetSourceSystemDt" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="ContractNumberExtensionDt" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationBillToAddress" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationBillToAddressLine2" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationBillToAddressLine3" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationBillToCity" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationBillToCountry" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationBillToAddressLine4" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationBillToState" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationBillToZip" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationPriorityIndicator" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationShipToAddress" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationShipToAddressLine2" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationShipToAddressLine3" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationShipToAddressLine4" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationShipToCity" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationShipToCountry" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationShipToState" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationShipToZip" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationSoldToAddress" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationSoldToAddressLine2" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationSoldToAddressLine3" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationSoldToAddressLine4" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationSoldToCity" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationSoldToCountry" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationSoldToState" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="LocationSoldToZip" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="PartySource" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
- <xsd:element name="PartySourceID" minOccurs="0">
- <xsd:simpleType>
- <xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="RowCreateDateTime" type="sqltypes:datetime" minOccurs="0" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
I use following package to register schema, which is giving error
BEGIN
DBMS_XMLSCHEMA.registerSchema(
'schemas-dart-com:sql:ConsolidatedAssetHeader',
XDBURIType('http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd').getClob(),
TRUE,
TRUE,
FALSE,
TRUE);
END;
Following Error is displayed.
BEGIN
ERROR at line 1:
ORA-31001: Invalid resource handle or path name
"http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd"
ORA-06512: at "SYS.XDBURITYPE", line 4
ORA-06512: at line 2
Can you please tell me what changes I need to make in order to resolve this error?Is there any specific location where I should put my schema file?
Thanks in Advance
VaibhaviCreate a file in c:\xmldata with the name my_xmlschema.xsd with the following content
<xsd:schema targetNamespace="schemas-dart-com:sql:ConsolidatedAssetHeader" xmlns:schema="schemas-dart-com:sql:ConsolidatedAssetHeader" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="ConsolidatedAssetHeader">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="InternalId" type="sqltypes:int" />
<xsd:element name="DCN">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="30" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="EventDateLastChanged" type="sqltypes:datetime" minOccurs="0" />
<xsd:element name="FinancialStatusIndicator" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="InScopeIndicator" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationPriorityIndicator" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="PhysicalInstallDate" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetComment" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="255" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetContractExtension" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetContractNumber" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetDescription" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetFinancialInstallDate" type="sqltypes:datetime" minOccurs="0" />
<xsd:element name="AssetFinancialRemovalDate" type="sqltypes:datetime" minOccurs="0" />
<xsd:element name="AssetFinancialStatus" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetName" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="255" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetParentSource" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetParentSourceID" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetPhysicalInstallDate" type="sqltypes:datetime" minOccurs="0" />
<xsd:element name="AssetPhysicalRemovalDate" type="sqltypes:datetime" minOccurs="0" />
<xsd:element name="AssetPhysicalStatus" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetPhysicalStatusIndicator" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetSerialIndicator" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetSerialNumber" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetSource" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetSourceID" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetSourceIndicator" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetSourceSystem" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetSourceType" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetTag" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="BillabilityIndicator" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="InScopeFlag" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="IPAddress" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="NetworkNumber" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="SubnetAddress" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element ref="schema:ConsolidatedAssetLocation" minOccurs="0" maxOccurs="unbounded" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
+ <xsd:element name="ConsolidatedAssetLocation">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="InternalId" type="sqltypes:int" minOccurs="0" />
<xsd:element name="ParentId" type="sqltypes:int" minOccurs="0" />
<xsd:element name="AssetLocationIDBillTo" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetLocationIDShipTo" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetLocationIDSoldTo" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetSourceDt" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetSourceIDDt" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="AssetSourceSystemDt" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ContractNumberExtensionDt" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationBillToAddress" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationBillToAddressLine2" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationBillToAddressLine3" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationBillToCity" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationBillToCountry" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationBillToAddressLine4" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationBillToState" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationBillToZip" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationPriorityIndicator" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationShipToAddress" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationShipToAddressLine2" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationShipToAddressLine3" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationShipToAddressLine4" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationShipToCity" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationShipToCountry" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationShipToState" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationShipToZip" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationSoldToAddress" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationSoldToAddressLine2" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationSoldToAddressLine3" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationSoldToAddressLine4" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="150" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationSoldToCity" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationSoldToCountry" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationSoldToState" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LocationSoldToZip" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="PartySource" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="PartySourceID" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="RowCreateDateTime" type="sqltypes:datetime" minOccurs="0" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema> -
Conditions in Calculation Schema not reflecting in Purch Info Record
Hi,
We are using calculation procedure TAXIN.
We have maintained Calculation Schema & maintained required conditions.
When we checked for maintaining these conditions in Purchasing Info Record, (Transaction Code - ME11 / ME12), these conditions are not appearing in the info record. But, the conditions appearing in the info record are not same as those in the Calculation Schema.
Also, the conditions maintained in Info Record are not getting copied to Purchase Order (except Base Price P000).
What could be the reason behind this? How to correct the same?
Regards,
Prashant KolhatkarTax procedure condtions will not appear in the info record. for the conditon which is not reflecting in the PO, you may check in inforecord whether there is a check mark in condition record saved for approval; if so it is deleted
-
Calculation schema under pricing procedure
in pricing procedure under calculation schema what is <b>Condition formula for alternative calculation type</b> and <b>Alternative formula for condition base value</b>
what is the use of these functions?in this field u can creat ur own formuls to calculat base price or condition type value
this are called routine.
eg if u want to calculate the cond value on some logic the u can write ur logic in this routine and change the valuer of ur base price or Condution type
simple eq will be rounding up the values of condition type 17 is the routien u can use
hope this helps
Reward if useful -
Accounting Key & Accruals Key in Calculation Schema (Pricing Procedure)
Hi Freinds,
I have a query regarding use of Accounting Key & accruals key in the Calculation Schema (Pricing Procedure).
What is the significance of Accounting key & accruals key in the calcuation schema? Which Accounting & Accruals keys have to be used for Gross price,Discount,Freight, tax etc in the Calculation schema? Please post your precious threads.
Thanks & Regards
Saeed Arifhi
AcyKy - Account Key/ Accrls - Accruals:
for SD module
u2022 The values of the Sales Revenues, Sales Deductions, Freight Revenues, Tax Revenues, and Rebate Accruals etc. are going to be posted in the respective G/L accounts in Fi Module.
u2022 In order to do this we assign account keys/ accruals to the different condition types based on their classification. The classification shown below.
o ERB Rebate sales deduct.
o ERF Freight revenue
o ERL Revenue
o ERS Sales deductions
o ERU Rebate accruals
u2022 For Ex.,
o For all Price condition types like PR00 etc. we assign ERL - Revenue.
o For all Discount condition types like K004, K005 etc. we assign ERS - Sales Deductions.
o For all Freight condition types KF00 etc. we assign ERF - Freight Revenues.
o For all Rebates condition types BO01 to BO05 we assign in Account key ERB - Rebates Sales deductions and for Accruals ERU - Rebate Accruals.
u2022 This account keys and accruals are in turn assigned to respective G/L accounts. So the system posts respective values in respective G/L accounts in Fi-Co Module.
u2022 This also one of the areas of SD - Fi Integration. SD consultants assign the account keys and Fi Consultants assign the respective G/L accounts in T.Code:VKOA.
Similarly for MM Module
Account keys are EIN, FR1, FR2, FR3, FRE, etc...
And in OBYC, we do necessary account determination for the same.
For e.g. Freight Posting in GR
Condition type FRA1, Accrual FR1 and in OBYC, assign Freight Clearing A/c to FR1
During GR;
Stock Account - Dr - 110 INR
GR/IR Clearing A/c - Cr - 100 INR
Freight Clearing A/c - Cr - 10 INR
transaction event key is the Key that identifies different types of G/L account.
The account key enables the system to post amounts to certain types of
revenue account. For example, the system can post freight charges
(generated by the freight pricing condition) to the relevant freight
revenue account.
use
To enable the system to find the relevant account for provisions (for
accrued delivery costs or miscellaneous provisions, for example), you
must assign a transaction/event (internal processing) key to each
condition type that is relevant to provisions in the step Define
Calculation Schema.
if u search on SDN or GOOGLE u will get many threads for this
hope it helps
regards
kunal -
Same Calculation Schema/Pricing Procedure- Same Vendor - Material & Service
Hi experts--
For subject matter(we are facing this issue in our organisation) I did my search and found the below threads but conversation did not provide what solution is to be implemented. Can someone help?
Currently we are using two unique vendor codes for tiding over our MM/SD problem even though vendor is same with same address,PAN & service tax registration.
We are a LSP and only recently went live on ECC 6.0 EnP4
warm regards--
A.VENKAT KRISHNAN
Same Calculation Schema/Pricing Procedure- Same Vendor - Material & Service
Posted: Aug 19, 2011 7:04 AM
Click to report abuse...
One vendor is providing service & material to the same Pur Org
Is it anyway to handle with only one vendor code for service & material procurement in same vendor account group with only one pricing procedure(calculation schema)?
Ramesh Babu Nag... [Active Contributor Silver: 500-1,499 points]
Posts: 535
Registered: 5/29/09
Forum Points: 1,380
Re: Same Calculation Schema/Pricing Procedure- Same Vendor - Material & Service
Posted: Aug 19, 2011 7:16 AM in response to: ARUL MURUGAN1 in response to: ARUL MURUGAN1
Yes, you can do it. There shouldn't be any issueHi,
Yes its possible.
you can use the same calculation schema for both so that with one vendor you can handle both material as well as service purchase.
Please revert if you face any difficulties.
Thanks & Regards, -
Issue in Calculation schema determination for Scheduling Agreements
Dear All,
I am facing an issue in Calculation schema determination for Scheduling Agreements. The issue is -
"Appropriate calculation schema is not being determined when a scheduling agreement is being created"
The required settings which have been maintained are - The Calculation Schema (ZEIC31) has been created, Vendor Schema group has been created, Purchasing Organisation Schema group has been created, They both have been assigned to the Calculation schema in Schema determination, The Vendor Schema group has been assigned to the Vendor Master Record in master data creation.
When I am creating the scheduling agreement, the system is by default choosing the calculation schema - RM0002. Thus I am not able to put the manual condition types which have been assigned in the calculation schema - ZEIC31.
1> On what logic is the system picking that calculation schema?
2> What settings can I do to make it pick that calculation schema only which has been assigned with POrg Sch Gp and Ve Sch Gp?
Regards,
Sudhanshu1> On what logic is the system picking that calculation schema?
As per "Define Schema Determination" in spro Purchasing document should pick the Pricing Procedure .
After creation of scheduling agreement have chacked your values in Scheduling agreement (Purchase ORG ,Schema grp in Vendor)
2> What settings can I do to make it pick that calculation schema only which has been assigned with POrg Sch Gp and Ve Sch Gp?
Check in Vendor mater is there any Plant specific Purcahsing data maintained.If it is plant specific Check purchasing data for that Plant.
Maybe you are looking for
-
**GUIDE** Install Windows 8 on the Acer C720
The Acer C720 is a great notebook but the limited capabilities of Chrome OS can be daunting at times. Here is a way to install Windows 8 for those who do not have a spare machine: Make a Windows 8.1 bootable USB (Google this) Put the Acer C720 into D
-
How to disable (turn off) a counter output
I have a similar question up on the the board but I thought I would ask it in another way to make it simple and straightforward. Can an E-series counter output be disabled (and enabled) quickly through some software command? When I say " disabled"
-
SDK 3.0: Compiler bug with std::deque?
When I call std::deque::assign(), I get all kinds of compile-time errors, including internal compiler errors. Note, however, that this happens only when I compile for the 3.0 device. It does not happen when I compile for the 3.0 simulator, 2.x device
-
Report with historical payment data and current bp balance
Hi, Has anybody created an report like this?? cardcode,cardname,adres,zipcode,documentnumber,doctotal,docdate,docduedate,payed amount and paydate?? data should be from now untill 1 year before (historical) Kind regards Mark
-
Spotlight Search stops working
You swipe down, type something but nothing will show up! Nothing at all. You can type any character(s). The Search seems turned off. Last time I managed to get it working by reloading the iPhone. The question is: what is going on Apple?