Error in LBWE for Delta

Hi,
I am using 2LIS_13_VDKON for extracting Invoice data from SAP R/3. I initialized the data and extracted the data successfully .Then I need to schedule the Job in LBWQ to collect the delta queue records from Extraction Queue.I am using 'Queued Delta ' Update mode.
But when I tried to schedule the Job using the Job Control I am getting an error. I am able to set the start date for the Job. When I try to schedule the Job , I am getting an error says that 'Error Generating Job' and I am not able to complete the Job.
Hence all the extraction queue records are not moving to Delta queue.
I am not sure how to rectify this error ,since there is no more information for the error.
Please let me know the solution if anyone faced this issue earlier .
Thanks for your time.
Thanks & Regards,
Raja

Hi,
Did you perform any enhancement on this data source....did you lock the users at the time when you were doing the data source enhancement...?
otherwise delta queue may face some problems and deltas may stop coming into the delta queue even if you have initialized before...
In fact, if not taken with care, can lead to various errors: delta requests terminate, the update from the extraction queue does not finish or V3 update is no longer processed, the initialization on data that was generated before the change no longer works, the protocol terminates...in short, a real tragedy !
Therefore, you should carry out the following steps before you change the extract structure (also for an R/3 release upgrade or plug-in/support package import):
close your system and make sure that no updates are performed (both by users or batch/background process);
start the update collective run directly from LC (that concerns either the V3 update or the Delta Queued update);
At this moment, with "delta direct" method, the delta queue (RSA7) must be empty, with "delta queued" method, the extraction queue (LBWQ) and delta queue (RSA7) must be empty, with "unserialized V3 update", the extraction queue (SM13) and the delta queue (RSA7) must be empty.
load all data of the respective datasources into your BW System.
To completely empty the delta queue, request a delta twice, one after the other: in this way the second upload will transfer 0 data records, but only with the second upload is the data of the delta queue that is available as a delta repeat deleted.
Now, that all data containers of the relevant data flow are empty, you can make (import) the data source enhancement or import the transport request for that data source.
For more information, please visit
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
Also...filling of set up tables should be performed during posting free period/ when the users are locked..otherwise similar problems as mentioned above may arise..
Note : also when you are importing the treansport request, at that time also the users should be locked and queues should be empty...
Thanks,
Tarun Brijwani.

Similar Messages

Error in RSA3 for Delta

Hi,
The data load for 0FI_AR_10 (payment history) delta load is fetching zero records after we did EPH4 (Golden Tax) Upgrade to the ECC 6.0 system.
When we check in RSA3 for Delta it is throwing error as -> Message no. RJ012
There is no other info. The data load looks successful in BW but with zero records.
Please suggest.
We are facing some what similar issue for 0CUSTOMER_ATTR as in the Ticket:
[0CUSTOMER data from Unicode R/3 to Non-Unocode BW Error|0CUSTOMER data from Unicode R/3 to Non-Unocode BW Error]
Thanks,
Joe

Hi
Go to RSO2 and give the data source name 0FI_AR_10 -- there you ahve extractor BWFI3D_GET_FIAR_CM_PH(functional module) ---> reset the function and module and reactivate it
mostely the problem will be solved.
incase if it is not solved the reason might be as below
These datasources have extraction type as F1 and the function module used is BWFI3D_GET_FIAR_CM_PH( Tcode: RSA2).
When we go through the code of the Function module, there is a Case statement with update mode which is written in such a way that when the update mode is full it throws one type of error and when the extraction mode is others(which includes init, delta etc) it throws another type of error.
This update mode field in the Function module will take the value when we run the Infopackage and we will get an error saying: 'Update mode when others is not supported by extraction API'(this error occurs as the update mode takes the value of c and executes 'when other' case).
In extractor checker(RSA3), the default value taken by the update mode will be F (since we are not executing any infopackage and the update mode value will be F by default).
So ultimately when that function module is executes it will throw an error no matter what type of load(delta or full) we select.The error will occur but it will be handled differently when you run in RSA3 and when you run the Infopackage.
so i would suggest you to raise a note to SAP on the same
and i will post if I find any solution going in future on the same.
Very intresting Question
pleasure answering
Santosh

Short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow

hi all,
i am getting short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow.
not able to figure out the actual issue and how to solve it.
can anyone suggest?
below is the details of the short dump
Short text
    Exception condition "UNKNOWN_TRANSCAT" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    A RAISE statement in the program "CL_SERVICE_TRG================CP" raised the
     exception
    condition "UNKNOWN_TRANSCAT".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "RAISE_EXCEPTION" " "
    "CL_SERVICE_TRG================CP" or "CL_SERVICE_TRG================CM003"
    "SORT_TRANSACTIONS"
    or
    "CL_SERVICE_TRG================CP" "UNKNOWN_TRANSCAT"
    or
    "SBIE0001 " "UNKNOWN_TRANSCAT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.

Hi,
It seems like some routine are there and check your rotines , transformation etc.
Regards
sivaraju

Error in Process Chain for Delta pack

Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
Thanks

Hi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK

Error in activating init flag for delta load

Hi everybody, I am trying to activate the init flag for delta load, when I schedule the infopak it is taking too long to execute and the status is remaining in yellow for a week. I checked in details tab the error message is u201C no data available in source system u201C Please helpu2026

Hi Vinod,
When there is no data available in the source system, you will have yellow flag for the delta init request. Check for the delta queue entry (RSA7) on the source system. Delta mechanism starts working once this flag is created. After that schedule the delta infopackage.
Also check on the source system whether there is any data avilable in the application tables related to this datasource. Take the help of functional consultants if required.
Regards,
Sreenivas.

Error: - No service for system port, client in Integration Directory

Hi
In Idoc to File scenario, My Idoc 've been successfully send from the sender system.
but its neither getting displayed in the SXMB_PATH nor saved in the specified path.
I checked in SM58 in R3 that RFC user has access to send data to XI. But it showing below Error:_
ERROR:-
No service for system Sender Port (SAPDEV) client sender client (300 ) in Integration Directory
Please do the needful
Thanks,
Anshul

Hi Anshul,
Go to:
TCODE SXMB_ADM -> Integration Engine Configuration
Please change the system rile to be "Application System", then retest if the similar issue happen again after that.
If not helped, follow:
1. Clear SLD Delta Cache Referesh in the Integration Directory
2. Open the Business System in edit mode and select Adapter specific identifiers following the menu path:
Service -> Adapter Specific Identifiers
3. Please click in the button next to "Apply" button to pick up the Logical system from SLD.
Regards,
Caio Cagnani

How to make JOB CONTROL setting for delta extraction in Production system .

Hello All,
We are in the process to transport our development to PD server in BI . We have transported the data sources to ECC production and now we are filling the setup table for " SD BILLING BW " . After filling Setup table data in full mode through infoPackage we have to load data in delta mode .
How we can set our Update mode(LBWE setting) in PD server ?
Is LBWE T.Code authorisation required in ECC PD server to make the setting of Update mode or We have to set all Job Control Paramater in Dev System at the time of transport the datasource request to ECC production . Is our time which is set in job control of ECC development will be reflected in ECC production ?
can any body tell me about how to make setting for delta extraction in Production system .
Thanks ...

Hi,
How do you load the data in the development system?
- you set up the update mode in the infopackage. There you must customize "Initialization"
- you have to filled the setup table in the production system without laoding the data in the BW? then this step was for nothing. Filling the setup table and do the INIT in the BW, this must be together - during no changing will be done in your R/3 SD.
Sven

"Error when reading ATP delta records"

Hi,
I have created Integration models for Location, Product, ATP Check, ATP Configuration, Stock and Sales Order.
After creating IM's when I tried to run ATP on my Sales Order I'm getting error " "Error when reading ATP delta records".
Can anyone provide me why I'm facing this error.
Thanks in Advance.
Ram

Dear Ram,
For the product/locations you are checking, it appears that ATP objects in the liveCache are missing which normally are created automatically when products and locations are created in APO.
I would advise to recreate all needed products and locations.
In APO, i.e. make again an initial data transfer of the master data from R/3. Previously the existing ones should be deleted to be sure that they will be created again. Then the problem should be solved.
If this does not help please check the the connection and LC settings to LDA and please try to restart the livecache. A potential explanation for the error would be an incorrectly maintained LDA connection to liveCache. Please check this by running transaction /SAPAPO/OM13 and selecting the 'checks' section.
The problem with the LDA connection could be e.g. very simple. If you check the table dbcon, which contains the description of the liveCache connections , if the liveCache names for LCA and LDA are different you should ensure, that the connections LCA and LDA are setup for the same liveCache (con_env in dbcon).
I hope this helps.
Regards,
TIbor

ALE change Pointers for delta load

The master data datasource is 0CRM_BPSALESCL_ATTR, which is in my source system use change pointers for delta loading. When I use delta loading, the error is "ALE change pointers are not set up correctly". I went to the source system, and use BD61 to activate change pointers. But it does not work. Then I created new Business partners to make changes. I can find these new records in table CDHDR and CDPOS, but there is no records found in table BDCP. And my delta loading still got the error as "ALE change pointers are not set up correctly."
Can anybody give me advice?
Thanks,
Wenjie

Hi, Ron,
Thanks for your reply. I already assign points to you.
I relicated the datasource, and re-active the transfer structure, but it still doesn't work. My one more question is that do I run BD61 on BI system or on source system? I did on source system only. And is there any more setting need to be done on source system? Because my error message said setting on source system is wrong.
Thank you very much.
wenjie

Use Trigger or Query for Deltas

Hi Gurus,
It has come up that my boss wants us to use a trigger on one of the most critical talbes we use for our website. Instead I have suggested to query for deltas and feed them out on time intervals.....which method is the least performance impacting on our db?
Any info/suggestions would be much appreciated.
S

Hi,
ScarpacciOne wrote:
When is it a good idea to use triggers? What scenarios are a good fit to implement a trigger?DML triggers are great for autiomatically supplying or correcting data entry.
For example, supplying an id number from a sequence when a new row is inserted, or filling in last_modify_date and last_modify_user columns.
Sometimes you can autiomatically correct data entry errors. For example, if a string is supposed to be all upper-case, or a DATE column is supposed to be midnight. You can (and should) have CHECK constraints to make sure people don't enter bad data, but sometimes you can safely say "I'm sure he meant 'ACTIVE', even though he said 'active'", or "I'm sure she meant TURNC(SYSDATE), not SYSDATE", and avoid having any error.
DML triggers are the only way to ensure something is done the as soon as some DML is performed. If it can wait, even a few minutes, then some othe mechanism (like a scheduled job, or a materialized view) can probably handle the situation more easily and reliably.

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

Hi all,
Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
Anyway,
I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
Mine doesn't.
I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
I have had this phone for several years and it has never done this.
It worked absolutely fine, until I loaded the latest version of iTunes it seems...
Any suggestions?
Many thanks

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

When i try to add DownloadHelper it comes up with unexpected installation error review the error console log for more details - 203, how to it check the log and how do i fix this problem?

== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

Mark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders

Can we use both 0FI_AP_3 and 0FI_AP_4 for Delta Loads at the same time.....

Hi Gurus:
Currently my company uses 0FI_AP_3 for some A/P reporting. It has been heavily customized & uses Delta loading. However, SAP recommends the use of "0FI_AP_4" for A/P data fro delta loads. I was able to Activate 0FI_AP_4 as well & do some Full Loads in Dev/Test boxes. Question is whether I can use both the extractors for "Delta" loads at the same time......? If there are any issue, what is the issue and how ccan I resolve it? Is the use of only one extractor recommended......??
Please let me know as this impacts a lot of my development....! Thanks....
Best...... ShruMaa
PS: I had posted this in "BI Extractors" forum but there has been no response...... Hope to get some response.......! Thanks

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

Short of dismantling and recreating a page how do i find out whats causing [Error: Invalid URL for Web Content Overlay]

Hi,
i received an indesign file to include in a folio that had links to the creators desktop where they had the assets for the web content overlay. When i try to update the folio i get the error message:
"Content generation error.
[Error: Invalid URL for Web Content Overlay]"
Which is fair enough.
The problem is, i have gone through and changed all URLs that I can see, but there is one somewhere, that I just can't find.
Is there a way to get a list of all web content overlays in a particular file? otherwise i will need to recreate the whole page again, and it has some pretty complex interactions which i rather wouldn't do.
I also cannot ask the original doc creator to just change the links as i'm sure he'll have the same issues as me, at not being able to track down the erroneous link.
The problem I have with DPS is that its not very transparent. you'll have to click on everything, and into every group to see what actions are on it, which can be extremely time consuming and frustrating when complex interactions are included.
thanks in advance for any assistance

I’ve found watching the process helpful to narrow down the page.
Working off a duplicate of the file, delete one layer at a time until you figure out what layer the problem is on.
From there it’s a bit easier to narrow down.

Error in LBWE for Delta

Similar Messages

Maybe you are looking for