Error in material display

i have created materials in material master. but when i try to view material in mm02 or mm03. it displays error " no values found". the same error occurs when i try to retrieve material by plant for creating a pr or po
please help me

hi
plz check the table entry for the material
go to SE16 give the table as MARA
then in MATNR field give the material code u have problem with
execute
system should show entry for it
also check that u have created material properly with the purchase and plant storage views
hope it help
regards
kunal

Similar Messages

In DP50 Error during material determination for service order

Hi,
While doing Resources-Related Billing request,the following error is displaying..
Kindly Help
Error during material determination for service order
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
501384
Message no. AD01156
Diagnosis
An error occured during material determination for a dynamic item.
System Response
The system cannot perform the function.
Procedure
Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
Thanks,
Mohit

Hi mohit,
You need to check DIP profile setting if profile is attached to your order type or not please check this
Thanks and regards
Sachin Kadam

When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later".

When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.

I'm getting the same problem with both my IPad 4 and iPhone 5
Just started a few weeks back, Since then I have had two Itunes updates.
Is this something Apple is aware of and trying to fix?

No error message is displayed while deleting an attendee from a course.

Hi Experts,
Mu customer is facing problem while trying to delete an attendee from a course under Training and event management. The path he is following is right:
1) In PSV1(Dynamic Attendance Menu)the employee is seen firmly booked in
a course.
2)Right-click on his name and select cancel
3)Click the dustbin to remove
But nothing is happening, neither the employee is getting moved from the course nor any error message is displaying giving us any indication of what can go wrong. Can you please suggest what can be the possible problem?
Strangest thing is, this problem is occuring only for one employee.
Thanks and Regards,
Toa

Hi Manoj,
Thanks for your reply.
That is the problem, no error message is showing. When the delete button is pressed, neither the attendee is getting deleted nor any error message is displaying as of why the deletion is not occuring.
FYI: The employee is not locked.
Thanks,
Toa

UOM error in Material master.

Hi
When we log on to Spanish language, we are getting error in material master for Unit of measure, that the unit of measure has not been created in the language ES. But same UOM has configured in EN language and its working fine for material, while in Spanish language it appear as *** with error details,
Could you please suggestu2026
regards
Vanraj

Hi,
Extactly you are right..you got to Logon in Languange ES and create the required UOM in t-code CUNI...
this shuld solve the issue..try and revrt back..
Also,In CUNI on top menu Go to-Translation-UOM here maintain Source lang to Target lan
Reg,
JJ
Edited by: Jagsap on Apr 20, 2010 4:10 PM
Edited by: Jagsap on Apr 20, 2010 4:15 PM

JavaMapping in PI 7.1 Error:Unable to display tree view; Error when parsing

hi,
i get by testing in PI 7.1 (operation mapping) this ERROR:
"Unable to display tree view; Error when parsing an XML document (Content is not allowed in prolog.)"
this is my java-programm-code:
import java.io.FileInputStream;
import java.io.FileOutputStream;
import com.sap.aii.mapping.api.StreamTransformation;
import java.io.*;
import java.util.Map;
import javax.xml.parsers.*;
import org.xml.sax.*;
import org.xml.sax.helpers.*;
/*IMPORT statement imports the specified classes and its methods into the program */
/Every Java mapping program must implement the interface StreamTransformation and its methods execute() and setParameter() and extend the class DefaultHandler./
public class Mapping extends DefaultHandler implements StreamTransformation {
Below is the declaration for all the variables we are going to use in the
subsequent methods.
     private Map map;
     private OutputStream out;
     private boolean input1 = false;
     private boolean input2 = false;
     private int number1;
     private int number2;
     private int addvalue;
     private int mulvalue;
     private int subvalue;
     String lineEnd = System.getProperty("line.separator");
setParamater() method is used to store the mapping object in the variable
"map"
     public void setParameter(Map param) {
          map = param;
     public void execute(InputStream in, OutputStream out)
               throws com.sap.aii.mapping.api.StreamTransformationException {
          DefaultHandler handler = this;
          SAXParserFactory factory = SAXParserFactory.newInstance();
          try {
               SAXParser saxParser = factory.newSAXParser();
               this.out = out;
               saxParser.parse(in, handler);
          } catch (Throwable t) {
               t.printStackTrace();
As seen above execute() method has two parameters "in" of type
InputStream and "out" of type OutputStream. First we get a new instance
of SAXParserFactory and from this one we create a new Instance of
SAXParser. To the Parse Method of SaxParser, we pass two parameters,
inputstream "in" and the class variable "handler".
Method "write" is a user defined method, which is used to write the
string "s" to the outpurstream "out".
     private void write(String s) throws SAXException {
          try {
               out.write(s.getBytes());
               out.flush();
          } catch (IOException e) {
               throw new SAXException("I/O error", e);
     public void startDocument() throws SAXException {
          write("");
          write(lineEnd);
          write("");
          write(lineEnd);
     public void endDocument() throws SAXException {
          write("");
          try {
               out.flush();
          } catch (IOException e) {
               throw new SAXException("I/O error", e);
     public void startElement(String namespaceURI, String sName, String qName,
               Attributes attrs) throws SAXException {
          String eName = sName;
          if ("".equals(eName))
               eName = qName;
          if (eName.equals("NUMBER1"))
               input1 = true;
          if (eName.equals("NUMBER2"))
               input2 = true;
     public void endElement(String namespaceURI, String sName, String qName)
               throws SAXException {
          String eName = sName;
          if ("".equals(eName))
               eName = qName;
          if (eName.equals("NUMBER1"))
               input1 = false;
          if (eName.equals("NUMBER2"))
               input2 = false;
     public void characters(char[] chars, int startIndex, int endIndex)
               throws SAXException {
          String dataString = new String(chars, startIndex, endIndex).trim();
          if (input1) {
               try {
                    number1 = Integer.parseInt(dataString);
               } catch (NumberFormatException nfe) {
          if (input2) {
               number2 = Integer.parseInt(dataString);
          if (input2 == true) {
               addvalue = number1 + number2;
               mulvalue = number1 * number2;
               subvalue = number1 - number2;
               write("" + addvalue + "");
               write(lineEnd);
               write("" + mulvalue + "");
               write(lineEnd);
               write("" + subvalue + "");
               write(lineEnd);
in developer studio 7.1 i dont get error.
this happens by testing the mapping-programm in ESR.
can somebody help me please?

Make sure that the xml created out after the java mapping is a valid xml with only one root node.
Regards,
Prateek

ORA-12008: error in materialized view refresh path with ORA-01652

I have a temp tablespace with 2 tempfiles of 2GB each (total 4GB) but still refresh of materialized view is failing with following error:
5646690 - BIS Materialized View Refresh Program
ORA-12008: error in materialized view refresh path
ORA-01652: unable to extend temp segment by 128 in tablespace TEMP1
I checked and temp ts is completly filled
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP1 2147483648 0
TEMP1 2147483648 0
My question is how do I find out how much space I need for temp tablespace. what 's the best practise to size temp tablespace when running refresh. refresh is done by client who is submitting a request thru ebiz apps so I 'd like to size it correctly without having to keep guessing.
Thanks so much in advance for any help

Hello,
Temp tablespace size depends how much sort by , order by operation your application performing. You can create new temp tablespace and drop old one with bigger file size
CREATE TEMPORARY TABLESPACE TEMP02 TEMPFILE '\mypath_to_temp\TEMP02' SIZE 256M REUSE AUTOEXTEND ON NEXT 256M MAXSIZE 8192M EXTENT MANAGEMENT LOCAL;
ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP02;
Drop tablespace temp including contents; -- Make sure you delete on temp data files.Here is link for your reading purpose
http://www.idevelopment.info/data/Oracle/DBA_tips/Tablespaces/TBS_3.shtml
Regards
Edited by: OrionNet on Mar 6, 2009 6:15 PM

Materialized View, ORA-12008: error in materialized view refresh path

I want to refresh a materialized view, but I get an ORA-12008 error.
Does anybody have an idea? I do not find any errors in my refresh statement.
CREATE MATERIALIZED VIEW scott.dummy_mv
TABLESPACE test
BUILD IMMEDIATE
USING INDEX TABLESPACE idx_test
REFRESH
     START WITH sysdate
     NEXT ROUND(SYSDATE)+5/24
     WITH PRIMARY KEY
ENABLE QUERY REWRITE
AS
SELECT KM.ID ID
          ,KM.USERNAME USERNAME
       ,KM.ABTID ABTID
FROM my_table KM
scott@orcl>desc dummy_mv
Name                                      Null?    Typ
ID                                        NOT NULL NUMBER(4)
USERNAME                                  NOT NULL VARCHAR2(30)
ABTID                                     NOT NULL NUMBER(4)
scott@orcl>
BEGIN
SYS.DBMS_JOB.REMOVE(6579);
COMMIT;
END;
DECLARE
X NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
( job       => X
   ,what      => 'dbms_refresh.refresh(''"scott"."dummy_mv"'');'
   ,next_date => to_date('07.01.2009 05:00:00','dd/mm/yyyy hh24:mi:ss')
   ,interval => 'ROUND(SYSDATE)+5/24              '
   ,no_parse => FALSE
SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
COMMIT;
END;
scott@orcl>exec dbms_refresh.refresh('dummy_mv');
BEGIN dbms_refresh.refresh('dummy_mv'); END;
FEHLER in Zeile 1:
ORA-12008: error in materialized view refresh path
ORA-00947: not enough values
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 820
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 877
ORA-06512: in "SYS.DBMS_IREFRESH", Zeile 683
ORA-06512: in "SYS.DBMS_REFRESH", Zeile 195
ORA-06512: in Zeile 1
scott@orcl>

crupper wrote:
I get the same error:
scott@orcl>exec dbms_mview.refresh('dummy_mv','c');
BEGIN dbms_mview.refresh('dummy_mv','c'); END;
FEHLER in Zeile 1:
ORA-12008: error in materialized view refresh path
ORA-00947: not enough values
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 820
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 877
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 858
ORA-06512: in Zeile 1
I would first check the "query" information of the DBA_SNAPSHOTS/DBA_MVIEWS dictionary views if it reveals anything obvious.
But it looks more like an internal error while processing the refresh. You can get more information about the error by tracing the session. A "alter session set sql_trace = true;" before running the refresh should be sufficient. Disconnect afterwards and check the generated trace file for errors either using "tkprof" and checking the output or by manually searching for "err=" in the trace file.
Which 4-digit version of Oracle are you using?
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Error messages are displayed when opening the RTV form.

Hi All,
While doing a return to vendor the following error messages are displayed.
1.Go to the Inventory Management --> Return to Vendor screen.
2. In Action Drop down select ‘New’ and click on OK
3. A series of errors are encountered.
4. A warning message as [640+49> 688] and then click ‘OK’.
5. Notice the error message”Multi view internal error: B_RTV_DETAIL.QTY_RETURNED:current_col_pos exceeds parameter defined maximum right position” and then click’ OK’.
Can any one help me out in these?
Thanks,
Sushanth.D

This is a coding issue in the form, maybe the number is too big for the box on the canvas.
It looks also like a business issue is kicking off the error, the message [640+49> 688] looks like some units of stock etc. check, e.g. the returned quantity is larger than the stock on hand.
File an SR with OracleSupport and/or open the UI's Form fmb code in Forms Developer.
Multi View relates to an (quite old) OracleRetail (Retek) Forms pll library that enhances the Forms features, if my memory is not letting me down.
Best regards,
Erik

Reg. Error in material BRICKS order 10003000 item 0000

Dear Experts
When I do confirmation in CO11N i am getting the following error
Error in material BRICKS order 10003000 item 0000
Message no. RU119
Diagnosis
The data necessary for automatic goods movements in a confirmation is incomplete or contains errors.
System Response
Automatic goods movements were not carried out. Instead, the system wrote error records.
Procedure
Process the error records in one of the following transactions: If the variable parameters are appropriately set then once the confirmation has been created the system asks you whether you want to process the error records. If you answer is "yes" then the system branches to the material overview where you can carry out processing. You branch to the transaction for reprocessing error records from automatic goods movements.
Pls help me
Thanks in advance
Rajakumar.K

Quantity and Value update tick is made in OMS2 - MATERIAL TYPE then this problem is solved.
by myself
Edited by: Raja Kumar on Aug 26, 2009 2:48 PM

Running Windows 7, all versions of Firefox beyond 3.6.0 will not access websites, showing Error 404 and displaying only the portion of the URL that follows the domain name

Choosing any of several dozen bookmarks, Firefox will show a screen reporting Error 404 and display only part of the complete URL (whatever follows the slant mark beyond the domain name). When going to a new site, such as provided by a Google search, the initial page may show up but clicking on links within that page again brings up the 404 error. My only solution has been to uninstall whatever new version of Firefox has been automatically downloaded and then re-install version 3.6.0, which works.

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also http://kb.mozillazine.org/Error_loading_websites

ORA-12008: error in materialized view refresh path... Bug?

SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0      Production
TNS for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> drop materialized view log on test_tbl;
Materialized view log dropped.
SQL> drop materialized view mv_test_tbl;
Materialized view dropped.
SQL> drop table test_tbl;
Table dropped.
SQL> create table test_tbl(
2   test_id   number(10)   primary key,
3   test_name varchar2(10) not null)
4 ;
Table created.
SQL> insert into test_tbl values (1,'bob');
1 row created.
SQL> insert into test_tbl values (2,'joe');
1 row created.
SQL> insert into test_tbl values (3,'john');
1 row created.
SQL> commit;
Commit complete.
SQL> create materialized view log on test_tbl
2 with primary key , rowid, sequence
3 (
4   test_name
5 )
6 including new values;
Materialized view log created.
SQL> create materialized view mv_test_tbl
2 refresh fast on commit
3 as
4 select test_id,
5         test_name
6 from   test_tbl;
Materialized view created.
SQL> update test_tbl set test_name = 'hello' where test_id = 1000;
0 rows updated.
SQL> commit;
Commit complete.Ok, so that's all good. Now if I create the materialized view log with the COMMIT SCN option:
SQL> drop materialized view log on test_tbl;
Materialized view log dropped.
SQL> drop materialized view mv_test_tbl;
Materialized view dropped.
SQL> create materialized view log on test_tbl
2 with primary key , rowid, sequence
3 (
4   test_name
5 ),
6 commit scn
7 including new values;
Materialized view log created.
SQL> create materialized view mv_test_tbl
2 refresh fast on commit
3 as
4 select test_id,
5         test_name
6 from   test_tbl;
Materialized view created.
SQL> update test_tbl set test_name = 'hello' where test_id = 1000;
0 rows updated.
SQL> commit;
commit
ERROR at line 1:
ORA-12008: error in materialized view refresh path
ORA-01006: bind variable does not exist
SQL>Committing an update that updates no rows against a master table for a single table fast refreshable materialized view results in the error above when the materialized view log on the master table is created with the COMMIT SCN option. I'm guessing that this isn't how things are supposed to work. Or am I missing something here? Anyone else encountered this before?
Cheers.
Edited by: Stain on Jan 25, 2013 1:27 PM

Query Rewrite is an option for a Materialized View, not a Materialized View Log. Also, query rewrite is used as an optimization technique which "transforms a SQL statement expressed in terms of tables or views into a statement accessing one or more materialized views that are defined on the detail tables". I don't think it plays any role in the refresh path.
Regardless, it made no difference.
SQL> create materialized view mv_test_tbl
2 refresh fast on commit
3 ENABLE QUERY REWRITE
4 as
5 select test_id,
6         test_name
7 from   test_tbl
8 ;
Materialized view created.
SQL> update test_tbl set test_name = 'hello' where test_id = 1000;
0 rows updated.
SQL> commit;
commit
ERROR at line 1:
ORA-12008: error in materialized view refresh path
ORA-01006: bind variable does not exist
SQL>Edited by: Stain on Jan 25, 2013 2:06 PM

About Refresh Error In Materialized view

hi
i have
Oracle 9.2.0.1 at the windows server 2003
i have created some materialized view to use in my one web application running on tomcat
i have scheduling for refresh it using refresh utility available in oracle materialized view snapshot refresh
but when its try to run state of refresh become unusable and table according to it
remains empty
when i try to do it manually it gives error log
Ora-12008 error in materialized view refresh path
ora-01114 io error writing block to file 201(block #2621321)
ora-27069 skgfdisp:attmempt to do i/o beyond the range of file
osd-04026 invalid parameter passed(OS 2621327)
ora-01114 io error writing block to file 201(block#2621321)
ora-27069 skgfdisp:attempt do i/o beyond the range of the file
osd-04026 invalid parameter passed (OS 2621327)
ora 06512 at "SYS.DBMS_SNAPSHOt",line 794
ora 06512 at "SYS.DBMS_SNAPSHOt", line 851
ora 06512 at "SYS.DBMS_SNAPSHOt", line 832
ora 06512 at line 2
even i could not understand this error
one strange thing in this when i restart my server and try to refresh
it is going to be refresh
please help me

I suspect one of your datafiles has exceeded the 4Gb windows limit. Your tablespace has probably been set to autoextend and this has created the problem. I am not sure what you can do at this point apart from recover from backup. I would open a TAR with Oracle Support as soon as possible to try and resolve this issue.
Please note: This forum is for OLAP issues only. If you need more information I would try posting on the database forum.
Keith Laker
Oracle EMEA Consulting
OLAP Blog: http://oracleOLAP.blogspot.com/
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
DM Blog: http://oracledmt.blogspot.com/
OWB Blog : http://blogs.oracle.com/warehousebuilder/
OWB Wiki : http://wiki.oracle.com/page/Oracle+Warehouse+Builder
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

ORA-12096: error in materialized view log

Hi All,
I had created a fast refresh materialized view. Log was also created.
Now i dropped the mv and the logs.
But now every time i update or insert into this customer table i get error message.
ORA-12096: error in materialized view log on Customer
ORA-00942: table or view does not exist
There are entries in the DBA_MVIEW_LOGS for customer table.
Please suggest.

Hi,
What database version are you on?
And do you have access to Metalink/My Oracle Support?
Found this, by the way:
ORA-12096: error in materialized view log on <table>
If problems occur when you try to access a log file for a materialized view, the system issues an ORA-12096 error message which is followed by the actual error. If the ORA-12096 error message is accompanied by an ORA-00942 message, the problem may be due to an online reorganization that was only partially undone. In this case, you can drop the log file for the materialized view manually (after you have verified that it is no longer required):
DROP MATERIALIZED VIEW LOG ON <table>;
Edited by: hoek on Jul 29, 2009 2:15 PM

ORA-12096: error in materialized view log on ORA-01301:insufficient privile

Hi,
One of our ebusiness Apps 11510 instances has database that was
upgraded from 9.2.0.6 to 10.2.0.4 with Database Vault.
After that, we are getting an error:
ORA-12096: error in materialized view log on "SCHEMA"."TABLE_NAME" ORA-01301:insufficient privileges
Can you please let know what can be the reason. Which user is being checked for the privileges?
Regards

I am facing the same issue in one of our internal instances.
Apps Environment has been upgraded from Database 9.2.0.6 to Database 10.2.0.4 with Database Vault. We started facing this issue and the same error after the upgrade. MLOG definition has not changed.
What privilege is it expecting to be present for the schema.
The definition of the MLOG is as given below
LOG_TRIGGER = NULL
ROWIDS = YES
PRIMARY_KEY = NO
OBJECT_ID = NO
FILTER_COLUMNS = NO
SEQUENCE = NO
INCLUDE_NEW_VALUES = NO

Error in material display

Similar Messages

Maybe you are looking for