Error in Monitor Interface SYN HTTP

this error in interface http syn
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error opening an RFC connection.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

Ximena,
Looks like the JAVA stack of your XI server is down or the connectivity between the JAVA and ABAP stack is down.
Check the following to confirm the same,
SM59--> TCP \IP --> AI_RUNTIME_JCOSERVER and AI_DIRECTORY_JCOSERVER.
Do you have connectiviy (TEST CONNECTION ) to these two.
If no, try a restart of your XI server, will work fine.
Regards,
Bhavesh

Similar Messages

Monitor-interface command

Dear all,
I am configuring an ASA5520, it is working in multi context mode.
I have try to configure the monitor-interface for a subinterface called Inside_shared, i receive an error on the interface name.
This subinterface is a shared interface.
I am within the context.
Why i can't do that?
Best regards,
Igor.

Hi Santi,
No You dont have to put the reflector port in any vlan. Just assign any port as a reflector port and it will not longer be a part of any vlan.
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225see/scg/swspan.htm#wp1401252
HTH,
-amit singh

Monitoring Interfaces /Integration Scenario's

Hi,
I got a task of Monitoring integration scenario's.
What are the other option available except: Data at Receiving application, RWB, Integration Engine and J2EE logs
to monitor interfaces.
How to do Error Handling in the case of file2file scenario?.

Hi,
There are some good documents available in SDN for XI monitoring, check the following links:
http://help.sap.com/saphelp_nw70/helpdata/EN/06/5d1741b393f26fe10000000a1550b0/frameset.htm
https://www.sdn.sap.com/irj/scn/advancedsearch?query=ximonitoirngguide
/people/michal.krawczyk2/blog/2005/09/07/xi-why-dont-start-searching-for-all-errors-from-one-place
For J2EE monitoring :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e63ad672-0801-0010-c5b2-ea75cfffb423
http://help.sap.com/saphelp_nw04/helpdata/en/39/83682615cd4f8197d0612529f2165f/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fc03a2a2-0a01-0010-b497-87518550e132
http://help.sap.com/saphelp_nw04/helpdata/en/c3/6fff40e39ba854e10000000a1550b0/frameset.htm
For file 2 file error handlimg, as mentioned above, you can set up CCMS Alerts:
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Also, a good blog talking about the main XI Production error:
/people/prashanth.azharuddin/blog/2006/11/24/some-errors-in-an-xi-production-environment
Rgds,
Puneet
Edited by: Puneet Singhal on Aug 19, 2009 8:25 AM

Compile Error: 'class' or 'interface' expected

Hi all,
I have a code which was compiling/running successfully:
import java.net.*;
code
When I added the line: import java.io.*;
import java.net.*;
import java.io.*;
code
Got the following compile error:
'class' or 'interface' expected
import java.io.*;
^
If I comment one of my import statements then it compiles, but I can't have both!
Does anybody know what's the problem? where it comes from?
Any help is greatly appreciated.

I haven't post the entire code b/c it's very long, anyway here it is...
import java.net.*; ;
import java.io.*;
//class TransactionOp: #1
class TransactionOp
int ID = 0;
double price = 0.0;
int subsID = 0;
String xmlDoc = "";
String xmlResp = "";
String respID = "";
String authCode = "";
int opResult = 0;
public TransactionOp(int anID, double aPrice, int aSubID)
     ID = anID;
     price = aPrice;
     subsID = aSubID;
     //op done values: 1: REF, 2: DCL, 3: AUTH, 4: AUTH_NoID
     //op errors: -1: noResponse, -2: noAuthResp, -3: noStatus, -4: no gw.
//class AddressCC: #2
class AddressCC
String zipcode = "";
String city = "";
String state = "";
String country = "";
String address1 = "";
public AddressCC(String addr1, String city1, String state1, String country1, String zipcode1)
     address1 = addr1;
     city = city1;
     state = state1;
     country = country1;
     zipcode = zipcode1;
//class InfoCC: #3
class InfoCC
String fullName = "";
String number = "";
String expDate = "";
public InfoCC(String name, String number1, String date)
     fullName = name;
     number = number1;
     expDate = date;
public class SurePayGW
//instance fields
private String merchant = "";//merchant = aMode
private String password = "";
private String server = "";
private int subsID = 0;
public SurePayGW()
     merchant = "34593";
     password = "hnbv78hj6";
     server = "xml.surepay.com";
}//endof constructor:SurePayGW
//String formattedS = "\"" + s + "\"";
public void spitDoc(SurePayGW sp, AddressCC address, InfoCC ccInfo, TransactionOp trans)
     String xmlBuf = "<!DOCTYPE pp.request PUBLIC \"-//IMALL//DTD PUREPAYMENTS 1.0//EN\" \"http://www.purepayments.com/dtd/purepayments.dtd\">";
     xmlBuf = xmlBuf + "<pp.request merchant=" + "\"" + sp.merchant+ "\" password=" + "\"" + sp.password+ "\">";
     xmlBuf = xmlBuf + "<pp.auth ecommerce=\"true\" ordernumber=" + "\"" + trans.ID + "\" recurring=\"false\">";
     xmlBuf = xmlBuf + "<pp.creditcard number=" + "\"" + ccInfo.number + "\" expiration=" + "\"" + ccInfo.expDate.charAt(0) + ccInfo.expDate.charAt(1)+ "/" + ccInfo.expDate.charAt(2) + ccInfo.expDate.charAt(3) + "\">";
     xmlBuf = xmlBuf + "<pp.address type=\"billing\" zip=" + "\"" + address.zipcode + "\" city=" + "\"" + address.city + "\" state=" + "\"" + address.state + "\" country=" + "\"" + address.country + "\" fullname=" + "\"" + ccInfo.fullName + "\" address1=" + "\"" + address.address1 + "\"/>";
     xmlBuf = xmlBuf + "</pp.creditcard>";
     xmlBuf = xmlBuf + "<pp.address type=\"shipping\" zip=" + "\"" + address.zipcode + "\" city=" + "\"" + address.city + "\" state=" + "\"" + address.state + "\" country=" + "\"" + address.country + "\" fullname=" + "\"" + ccInfo.fullName + "\" address1=" + "\"" + address.address1 + "\"/>";
     xmlBuf = xmlBuf + "<pp.lineitem sku=\"R" + trans.subsID + "Zg\" description=\"Subscription Renewal\" taxrate=\"0\" quantity=\"1\" unitprice=\"" + trans.price + "USD\"/>";
     xmlBuf = xmlBuf + "</pp.auth></pp.request>";
     //print("@DBG [SurePayDoc.submitTransaction]: will send %s" % xmlBuf)
     trans.xmlDoc= xmlBuf;
     //System.out.println("This the final result of xmlBuf: ");
     //System.out.println(xmlBuf);
     //System.out.println("trans.xmlDoc = " + trans.xmlDoc);
}//endof m: spitDoc
public void submitTransaction(SurePayGW sp, TransactionOp aTrans)
     String param = "";
     HttpURLConnection connection;
     URL url;
     String urlString = "";
     String input = "";
     String response = "";
     try
          //params= urllib.urlencode({'xml' : aTrans.xmlDoc})
          param = java.net.URLEncoder.encode(aTrans.xmlDoc, "UTF-8");
          //System.out.println("The output from java.net.URLEncoder.encode: " + param);
          //link= httplib.HTTPSConnection(self.server)
          urlString = "https://" + sp.server;
          url = new URL(urlString);
          connection = (HttpURLConnection)url.openConnection();
          System.out.println(connection.getURL());
          System.out.println(connection.getResponseCode() + " " + connection.getResponseMessage());
          System.out.println(connection.getURL());
          connection.setDoInput(true);
          connection.setDoOutput(true);
          connection.setUseCaches(false);
          //link.putrequest('POST', '/')
     connection.setRequestMethod("POST");
          //link.putheader('Content-type', 'application/x-www-form-urlencoded')
          //link.putheader('Content-length', ("%d" % len(params)))
          //link.putheader('Accept', 'text/plain')
          connection.setRequestProperty("Content-type", "application/x-www-form-urlencoded");
          connection.setRequestProperty("Content-length", param.length());
          connection.setRequestProperty("Accept", "text/plain");
          //link.endheaders()
          connection.connect();
          System.out.println("Client : Connected");
          //link.send(params)
          //response= link.getresponse()
          //data= response.read()
          DataOutputStream out = new DataOutputStream(connection.getOutputStream());
          System.out.println("Client : Writing Content");
          out.writeBytes(content);
          System.out.println("Client : Flushing Stream");
          out.flush();
          System.out.println("Client : Waiting for response from Server");
          BufferedReader in = new BufferedReader(new InputStreamReader(http.getInputStream()));
          System.out.println("Client : Opened input stream");
          while((input = in.readLine()) != null)
               response += input + "\r";
          System.out.println("Client : received : "+response);
          //I'm not bothering to close the streams or http connection yet.
     }//endof: try
     catch (MalformedURLException e)
          e.printStackTrace();
     catch (Exception e)
          e.printStackTrace();
}//endof m:submitTransaction
}//endof class:SurePayGW

[wscompile] error: invalid remote interface

I have an interface I want to publish as a web service. This interface extends java.rmi.Remote and each of its methods throws a RemoteException. But when I run wscompile (via ant) against this interface in order to have the wsdl file generated it gives me:
error: invalid remote interface; class manplan.j2ee.service.project.ProjectManager is not an interfacee
I have searched the forum and the internet yet could not find an answer. Any hints are most welcome. Below you will find excerpts from the relevant files.
Cheers,
Olaf
[interface]
public interface ProjectManager extends java.rmi.Remote
     void createProject(final Project project) throws DuplicateProjectException,
               ProjectManagementRuntimeException, RemoteException;
[ant]
<wscompile
     keep="true"
     define="true"
     base="${ws.build.classes.dir}"
     xPrintStackTrace="true"
     verbose="true"
     model="${ws.build.dir}/${ws.model.rpcenc.file}"
     config="${ws.conf.rpcenc.file}">
     <classpath>
          <path refid="ws.class.path"/>
     </classpath>
</wscompile>
[interface-config.xml]
<configuration
xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<service
name="ProjectManagementService"
targetNamespace="urn:manplan:Services"
typeNamespace="urn:manplan:Types"
packageName="manplan.j2ee.webservice">
<interface name="manplan.j2ee.service.project.ProjectManager"/>
</service>
</configuration>

OK. Found it: unlike Axis' java2wsdl does wscompile not support JavaBeans and so it gets confused by all those Project params and return types. So I guess wscompile is not the right tool for me in this situation?
Cheers,
Olaf

Prevent automatic workflow restart after error on an interface

Hi, i've got an IDOC-XI-SOAP interface that sends large xml's.
It causes me constants time-outs because, the reciever interface, doesn't send the response until finish processing (more than 3 minutes per IDOC).
I need 2 things to solve this issue.
1- Change the time-out for this particular interface
2- Cancel the automatic workflow restart after error on this particular interface
Thanks for your time,
Roberto

RSXMB_RESTART_MESSAGES program when schedueld in BG restarts failed messages. Hence you can cancel this process. But it will affect other interfaces also.
http://help.sap.com/saphelp_nw04/helpdata/en/cd/20bc3ff6beeb0ce10000000a114084/content.htm
I have 1 more Question for you. Are you usigna BPM for IDOC --> XI -- >SOAP?? B'cos IDOCS are aysnc in nature & you are talking about waiting for SOAP response from your receiver.
-SM

Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 - var test = parent.add('statictext', undefined, text) when I try to use pattern fill/scripted patterns. I have unin

Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 -> var test = parent.add('statictext', undefined, text) when I try to use pattern fill/scripted patterns. I have uninstalled and re-installed PS CC. I have opened holding down shift to disable third party plug-ins. I have moved 3rd party plugins to a temp location outside of ps and it still doesn't help. It worked once, and only once and now won't work at all.

Unless your Photoshop question has to do with a download/install error, you should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Error: QueryInterface for interface SAPbouiCOM.IApplication failed.

Hi,
I have a problem with UI:
We have a process that is hung. A Process setting specialPrices to many customers and in the middle of process AddOn crash with a folloving error:
Error: QueryInterface for interface SAPbouiCOM.IApplication failed.
This occurs in several processes of our various customer. this seems a bug in the UI
Someone have any idea about this?
thanks in advanced

Hi Alejandro,
When the error occurs, how much memory is your addon using? I've seen this error before in some addons where a process is leaking memory.
Try running your process and monitoring the memory size of your addon's executable and the memory size of the SAPbouiCOM.exe in Task Manager.
Kind Regards,
Owen

Error while invoking webservice throu https

Error while invoking webservice throu https://
can any one help me on this topic please:
CODE:
SOAPConnection con = null;
          try{
               String endpoint = "https://wks3089639:4565/Service.serviceagent/PortTypeEndpoint1";
               //String endpoint = "http://wks3101999:5539/Service.serviceagent/PortTypeEndpoint1";
               //String endpoint      = args[0];
               //String soapAction      = args[1];
               System.out.println("javax.net.ssl.keyStore-->"+System.getProperty("javax.net.ssl.trustStore"));
               System.setProperty("javax.net.ssl.trustStore","C:/Documents and Settings/1067555/Desktop/certificates/cer.jks");
               System.setProperty("javax.net.ssl.keyStore","C:/Documents and Settings/1067555/Desktop/certificates/server.keystore");
               System.setProperty("javax.net.ssl.trustStorePassword","password");
               System.setProperty("javax.net.ssl.keyStorePassword","password");
               // use Sun's reference implementation of a URL handler for the     "https" URL protocol type.
               //System.setProperty("java.protocol.handler.pkgs","com.sun.net.ssl.internal.www.protocol");
               // dynamically register sun's ssl provider
               System.setProperty("security.provider","com.sun.net.ssl.internal.ssl.Provider");
               //Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
               System.out.println("javax.net.ssl.trustStore-->"+System.getProperty("javax.net.ssl.trustStore"));
               System.setProperty("javax.net.debug","ssl,handshake");
               SOAPConnectionFactory connectionFactory = SOAPConnectionFactory.newInstance();
               con = connectionFactory.createConnection();
               MessageFactory messageFactory      = MessageFactory.newInstance();
               SOAPMessage message                = messageFactory.createMessage();
               SOAPPart soapPart                     = message.getSOAPPart();
     SOAPEnvelope envelope                = soapPart.getEnvelope();
     SOAPBody body                          = envelope.getBody();
//     MimeHeaders headers = message.getMimeHeaders();
//     headers.addHeader("SOAPAction", soapAction);
//     headers.addHeader("SOAPAction", "/Service.serviceagent/PortTypeEndpoint1/Operation");
//     headers.addHeader("Content-Type","text/xml");
//     headers.addHeader("charset","utf-8");
     MimeHeaders headers = message.getMimeHeaders();
     headers.addHeader("SOAPAction", "/Service.serviceagent/PortTypeEndpoint1/sampleOperation");
     headers.addHeader("Content-Type","text/xml");
     headers.addHeader("charset","utf-8");
     StreamSource inputmsg = new StreamSource(new FileInputStream("client.wsdl"));
     soapPart.setContent(inputmsg);
     System.out.println("REQUEST:\n");
     message.writeTo(System.out);
     System.out.println();
     message.saveChanges();
     SOAPMessage reply = con.call(message, new URL(endpoint));
     System.out.println("RESPONSE:\n"+reply.toString());
     System.out.println("Header:::"+reply.getSOAPHeader());
     System.out.println("Body:::"+reply.getSOAPBody());
     System.out.println("RESPONSE:\n");
     TransformerFactory transformerFactory      = TransformerFactory.newInstance();
     Transformer transformer                     = transformerFactory.newTransformer();
     //Extract the content of the reply
     Source responseContent                          = reply.getSOAPPart().getContent();
     //Set the output for the transformation
     StreamResult result = new StreamResult(System.out);
     transformer.transform(responseContent, result);
     System.out.println();
          }catch(Exception e){
               e.printStackTrace();
          finally{
               con.close();
Exception:
10-Nov-2008 11:55:04 com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection post
SEVERE: SAAJ0009: Message send failed
com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:127)
     at com.Sample.main(Sample.java:91)
Caused by: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Message send failed
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:121)
     ... 1 more
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:325)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(HttpSOAPConnection.java:150)
     ... 3 more
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at sun.net.NetworkClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.protocol.https.HttpsClient.<init>(Unknown Source)
     at sun.net.www.protocol.https.HttpsClient.New(Unknown Source)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.getNewHttpClient(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.getOutputStream(Unknown Source)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:282)
     ... 4 more
CAUSE:
java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Message send failed
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:121)
     at com.Sample.main(Sample.java:91)
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:325)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(HttpSOAPConnection.java:150)
     ... 3 more
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at sun.net.NetworkClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.protocol.https.HttpsClient.<init>(Unknown Source)
     at sun.net.www.protocol.https.HttpsClient.New(Unknown Source)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.getNewHttpClient(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.getOutputStream(Unknown Source)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:282)
     ... 4 more
CAUSE:
java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Message send failed
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:121)
     at com.Sample.main(Sample.java:91)
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:325)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(HttpSOAPConnection.java:150)
     ... 3 more
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at sun.net.NetworkClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.protocol.https.HttpsClient.<init>(Unknown Source)
     at sun.net.www.protocol.https.HttpsClient.New(Unknown Source)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.getNewHttpClient(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.getOutputStream(Unknown Source)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:282)
     ... 4 more
Edited by: javausers07 on Nov 10, 2008 11:58 AM

I hope the sun forum can help for me. Lets see

SAP ECC error:'Migration Monitor' exits with error code 103.

Hi All,
I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
I am stuck at the import ABAP.Getting error
ERROR 2008-08-08 16:10:53
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
1) imort_monitor.java.log-->contains
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
Loading of 'SAPVIEW' import package: ERROR
Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
2)import_monitor.log
ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is interrupted with R3load error.
Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPVIEW.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-08-08 16:10:52
All import packages are processed.
WARNING: 2008-08-08 16:10:52
1 error(s) during processing of packages.
INFO: 2008-08-08 16:10:52
Import Monitor is stopped.
3)SAPVIEW.log
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001" ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001", T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(DB) INFO: disconnected from DB
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
Only SAPDB: SAPSID srvice of SAP DB is only up.
No other services of database are up.And i am not able to up the other services also.
Is it required to up the other services?
If not?
Why this error is occuring?
Any help will be appreciated.
Thanks&Regards
Manisha das

Hello Manisha,
The one of the possible reasons for this is due to lack of H/W.
Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
If the issue is with H/W, then this should fix the issue.
Hope it helps,
Regards,
Satish.

Accounting Document not posted for Cancelled Invoice -error in FI interface

Hi,
When I create a billing document then an accounting document gets created automatically in the background and then when I cancel the billing document no accounting document gets generated and the field Posting Status in header Detail of Billing document updated as "Errors in Financials Interface.
I tried to release it for Posting via VFX3 but failed due to below error message in Log:
"Incorrect doc.no.: 4900000005. Select document number between 3000000000 and 3099999999"
I have checked the Number range assignments to the Invoice type and Accounting type.
The number range is same for both Invoice type (Y0F2) and Cancelled Invoice type (Y0S1).
The Accounting document type (RV) is also same for both the cases. But it is working fine for Y0F2 (Acounting document generated and cleared automatically). But not working fine for Cancelled Invoice (Y0S1).
Can anybody please help me find out a solution to the issue.
Thanks, Ram.

Hi,
The error message F5151 refers to the number range of the FI document.
Please have a look at the note 1259505: FAQ: New cancellation procedure in SD, which covers this issue in detail.
Question 5:
Q5. What is the FI document type, generated by the cancellation ?
In the old cancellation procedure, the FI document type is always
determined in SD, and passed to FI (the same when a normal invoice -
not a cancellation - is transferred to accounting).
In transaction VOFA there is the field 'Document type' (TVFK-BLART).
If this field is filled, then the FI document will have the document
type maintained here.
If TVFK-BLART is empty, then the FI document will get the default
document type 'RV'.
If the new cancellation procedure is performed, the FI document type is
always determined in FI, based on the document type of the FI document
to be reversed.
In transaction OBA7 the FI document type has assigned the field 'Reverse
document type' (T003-STBLA).
If it is filled, then the FI cancellation document will get the document
type maintained here.
If T003-STBLA is empty, then the FI document cancellation will get the
same document type as the cancelled FI document.
Notice that an unexpected FI document type can cause the error message
F5 151.
Example:
F2 invoice 90000001 was released, creating an accounting document with
document type 'RV'.
This F2 invoice is reversed by the S1 billing document 70000001.
In customizing of SD there is:
Billing Type    Document Type
F2              RV
S1
In customizing of FI there is:
Document Type    Number range   Reverse Document Type
RV               00             AB
AB               01             AB
The FI number ranges (object RF_BELEG) are:
No From number    To number   Ext
00 0090000000     0099999999 X
01 0100000000     0199999999
Different situations can occur, due to these customizing settings of the
FI document type, caused by the type of cancellation.
If the new cancellation is used:
The FI document type 'RV' has 'Reverse Document Type' = 'AB'.
Document type 'AB' has number range '01' set as internal.
So the FI document will have its own number included in
100000000-199999999.
There is no issue.
If the old cancellation is used:
The cancellation billing type S1 has no 'Document type' maintained, so
the FI document will get document type 'RV'. It has number range '00',
set as external number range.
So the FI document should get the same number of S1 billing document.
But the S1 billing document has number 70000001, not included in the
interval of number range '01'.
This will cause error F5 151.
I hope this information helps you.

Error in Acctg Interface in Invoice

hi all,
I cannot create an accounting doc for an invoice which has a posting status: " Error in Accounting Interface".
I read all the threads in the forums. I did not have issue with Acct Determination for Revenue. I do not use acct assignment group. The Account Anlysis in VF02 is fine.
Do we assign anything from an invoice to a cost center ??
When i try to release accounting doc, i got error msg:
Cost Center Control-Area/ 3150 does not exist on 7/7/2010
Issue is there is no cost center 3150 at all. Why is it saying cost center ? Any suggestions are welcome.
thanks
Joyce

Cost center is not available in the specific Controlling area. Reason could be any of the below :
- not available on particular date, that means the validity is not in the period in which you are posting.
- cost center itself is not available.
-wrongly selected cost center / wrongly entered cost center
Please check the valid from date and valid to date of the cost center in the cost center master data in KS02 and you can extend the valid to date if necessary.
OR
Is it a GUI transaction that you are trying to pass or some batch input/BAPI?
If the last is correct, put leading zeros in the cost centre field. If it's a normal transaction, check that the cost centre is assigned to the right company code (KS03).
Thanks & Regards
JP

What does this actually mean and how do I fix it: Alert: Error Count Monitor Resolution state Object Hyper-V Virtual Storage Device Has a value

We are getting this alert on a fair few of our VMs with VHDXs and Dynamic VHDs. Everything seems OK but I am not sure what this actually means and what I need to do to resolve the issue. How do I reset the error count if that is what is required? Thanks
in advance.
Alert: Error Count Monitor Resolution state: New
Error Count Monitor Source: MyVm01 Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE Last modified by: System Last modified time: 2/9/2013 2:08:48 PM Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual
Sat 09/02
To:Administrator
09 February 2013 14:09
Alert: Error Count Monitor
Source: MyVm01
Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE
Last modified by: System
Last modified time: 2/9/2013 2:08:48 PM
Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual hard disks-MyVm01-DATA02.vhdx
            Object Hyper-V Virtual Storage Device
            Counter Error Count
            Has a value 9
            At time 2013-02-09T14:08:48.0000000+00:00
Darren

But I am getting this alert from SCOM and SCOM has no information about the alert for me to find out what to do - thought that was the point of SCOM to let you know of problems and how to resolve them. :)
The alert is coming from the Error Count Monitor that is part of the Hyper-V Management Pack Extensions (v 4.0.0.0)
I have tried looking in the Event Logs on the Host and there doesn't seem to be any storage related errors there. I am trying to establish if this is a false positive, why it is happening and if it is safe to override and ignore.
There is nothing on the Product Knowledge tab and nothing on the Alert Context other than what I have already mentioned (see below).
Thanks for responding.
Time Sampled:
09/02/2013 14:08:48
Object Name:
Hyper-V Virtual Storage Device
Counter Name:
Error Count
Instance Name:
c:-clusterstorage-volume1-myvm-virtual
hard disks-MyVM-DATA02.vhdx
Value:
9
Darren

HealthCheck operation fails on mcsmgr.log and Error sending DAV request. HTTP code 600, status on Data transferservice.log

Hi,
I have a CAS, primary site and a DP. On Site properties I have set client communication : HTTP or HTTPS and PKI. on management point properties as well I have set Client communication as HTTPS PKI.
1. On primary site Multicast_servicepoint status is "error": I checked the mcsmgr.log and found below details:
Failed to send http request /SMS_MCS/.sms_mcs?op=healthcheck. Error 12030
Call to HttpSendRequestSync failed for port 443 with 12030 error code.
Health check operation failed, error code is 12030
Health check operation failed, error code is 12030
2. When I deploy any package to client it stuck in software center as "Downloading the information". no content has been getting copied. I checked the log 'datatransferservice.log' and found below error :
"Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
GetDirectoryList_HTTP mapping original error 0x80072efe to 0x800704cf.
GetDirectoryList_HTTP('https://myDPaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028') failed with code 0x800704cf.
Job {CFD64352-918B-4C1D-A9C4-9C52ABAC6524} reverted impersonation.
Error retrieving manifest (0x800704cf). Will attempt retry 1 in 30 seconds.
Failed to send request to /NOCERT_SMS_DP_SMSPKG$/CAS00028 at host Mydpaddress, error 0x2efe
[CCMHTTP] ERROR: URL=https://mydpaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028, Port=443, Options=480, Code=12030, Text=ERROR_WINHTTP_CONNECTION_ERROR
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:41932A1A-ADDE-450F-8F16-22DC875D2E39";
DateTime = "20141225182459.543000+000";
HostName = "mydpaddress.comt";
HRESULT = "0x80072efe";
ProcessID = 7356;
StatusCode = 600;
ThreadID = 6936;
Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
I think there is some issue with IIS configuration on site server or DP or on both. Please let me know a solution..
Regards

I have corrected the PKI certificate. still Issue not resolved.
I checked further and found sms_mp_control_manager was stopped and was offline, Unable to communicate with component (error below)
Unable to query the component.
This is a child primary server. not on production yet. Removing and adding MP will resolve the issue ? if yes what are the prerequesite you suggest. pls share any link .
or any quick resolution you have ? please share...
Log: mpmsi.lasterror
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
Property(S): CCMSHAREMODE = 1
MSI (s) (5C:EC) [08:22:19:157]: Note: 1: 1729
MSI (s) (5C:EC) [08:22:19:157]: Product: ConfigMgr Management Point -- Configuration failed.
MSI (s) (5C:EC) [08:22:19:157]: Windows Installer reconfigured the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7804.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status:
1603.
MSI (s) (5C:EC) [08:22:19:368]: Deferring clean up of packages/files, if any exist
MSI (s) (5C:EC) [08:22:19:368]: MainEngineThread is returning 1603
MSI (s) (5C:B0) [08:22:19:372]: RESTART MANAGER: Session closed.
MSI (s) (5C:B0) [08:22:19:372]: No System Restore sequence number for this installation.
=== Logging stopped: 12/26/2014 8:22:19 ===
MSI (s) (5C:B0) [08:22:19:375]: User policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Machine policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (5C:B0) [08:22:19:375]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (5C:B0) [08:22:19:377]: Destroying RemoteAPI object.
MSI (s) (5C:00) [08:22:19:377]: Custom Action Manager thread ending.
MSI (c) (30:B0) [08:22:19:378]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (30:B0) [08:22:19:379]: MainEngineThread is returning 1603
=== Verbose logging stopped: 12/26/2014 8:22:19 ===

Error Packaging Media!! HTTP request error

Hi,
I have followed all the steps given in FAXs_2_0_Quickstart.pdf.
In Flash Access Manager, I have selected Single file from the local machine with ad-policy.pol,
when I click Package Media, I am getting the following error message
FAULT!
Error Packaging Media!! HTTP request error
Tomcat log file is showing following error
org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet UICommunicator threw exception
java.lang.NumberFormatException: For input string: ""
    at java.lang.NumberFormatException.forInputString(Unknown Source)
    at java.lang.Integer.parseInt(Unknown Source)
    at java.lang.Integer.valueOf(Unknown Source)
    at java.lang.Integer.decode(Unknown Source)
    at com.adobe.flashaccess.refimpl.util.ParamsReader.readPackagerParams(ParamsReader.java:812)
    at com.adobe.flashaccess.refimpl.userinterface.UICommunicator.packageSingleMediaFile(UICommu nicator.java:1438)
    at com.adobe.flashaccess.refimpl.userinterface.UICommunicator.doPost(UICommunicator.java:129 )
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.ja va:583)
    at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
    at java.lang.Thread.run(Unknown Source)
Thanks for the help.

Hi Eric,
Pls find below snapshots of the Preferences, Package Media Tabs and error messages. Other Tabs have been untouched.
Thanks.

Error in Monitor Interface SYN HTTP

Similar Messages

Maybe you are looking for