Error in passing decimal from Proxy to SQL
Hi,
I am having a Proxy to JDBC scenario.
In the proxy sender if the value is 123.45 then I want to pass it as it is to JDBC. The type is FLTP for this.
But unfortunately, proxy sends it as 1.2345E2 and it creates an error in data insertion in SQL.
Please tell me that how can I remove the 'E' stuff.
thanks,
Piyush
Hi Piyush,
Declare this field as String.
Thanks
Sugata
Similar Messages
-
Error while converting schema from oracle to SQL server
Hello,
I am getting following error while converting schema from oracle to SQL server using SSMA.
I get Errors 1-3 while migrating procedures and error 4 while migrating a table.
1- O2SS0050: Conversion of identifier 'SYSDATE' is not supported.
2- O2SS0050: Conversion of identifier 'to_date(VARCHAR2, CHAR)' is not supported.
3- O2SS0050: Conversion of identifier 'regexp_replace(VARCHAR2, CHAR)' is not supported.
4- O2SS0486: <Primary key name> constraint is disabled in Oracle and cannot be converted because SQL Server does not support disabling of primary or unique constraint.
Please suggest.
Thanks.The exact statement in oracle side which causing this error (O2SS0050:
Conversion of identifier 'to_date(VARCHAR2, CHAR)' is not supported.) is below:
dStartDate:= to_date(sStartDate,'MON-YYYY');
Statement causing error O2SS0050:
Conversion of identifier 'regexp_replace(VARCHAR2, CHAR)' is not supported is below.
nCount2:= length(regexp_replace(sDataRow,'[^,]'));
So there is no statement which is using to_date(VARCHAR2,
CHAR) and regexp_replace(VARCHAR2, CHAR) in as such. 'MON-YYYY' and '[^,]'
are CHAR values hence SSMA is unable to convert it from varchar2 to char.
Regarding SYSDATE issue, you mean to put below code in target(SQL) side in SSMA ?
dDate date := sysdate;
Thanks. -
Getting error , while passing parameters from one page to another page
Hello friends,
i am getting error, while passing parameters from one page to another page, below code i wrote.
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
ArrayList arl=new ArrayList();
EresFrameworkAMImpl am=(EresFrameworkAMImpl)pageContext.getApplicationModule(webBean);
ERecordImpl ERecordObj=new ERecordImpl();
HashMap hMap = new HashMap();
hMap.put("1",ERecordObj.getTransactionName());
hMap.put("2",ERecordObj.getTransactionKey());
hMap.put("3",ERecordObj.getDeferredMode());
hMap.put("4",ERecordObj.getUserKeyLabel());
hMap.put("5",ERecordObj.getUserKeyValue());
hMap.put("6",ERecordObj.getTransactionAuditId());
hMap.put("7",ERecordObj.getRequester());
hMap.put("8",ERecordObj.getSourceApplication());
hMap.put("9",ERecordObj.getPostOpAPI());
hMap.put("10",ERecordObj.getPayload());
// hMap.put(EresConstants.ERES_PROCESS_ID,
if(pageContext.getParameter("item1")!=null)
pageContext.forwardImmediately(EresConstants.EINITIALS_FUNCTION,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
hMap,
true,
OAWebBeanConstants.ADD_BREAD_CRUMB_YES
Error(71,2): method forwardImmediately(java.lang.String, byte, null, java.util.HashMap, boolean, java.lang.String) not found in interface oracle.apps.fnd.framework.webui.OAPageContext
Thanks
krishna.Hi,
You have imported the wrong class for HashMap.
Import
com.sun.java.util.collections.HashMap; instead of java.util.HashMap
Thanks,
Gaurav -
Error when passing URL from OLAP Universe to WebI
Hi Experts,
I am getting 'The Supplier XML is not valid' WebI error when passing a URL from OLAP Universe.
URL example:
'<a href="http://www.sap.com">web link</a>'
I follow Universe Designer Guide:
- typing above URL into Dimension Select statement
- selecting Read As Hyperlink in Object Format.
When I drop this dimension into Result Objects panel in WebI Query and run refresh 'The Supplier XML is not valid' pops up.
What i am trying to achive is to create a pre-formatted as Hyperlink object (dimension) in WebI to make it available for a user to design ad-hoc reports.
Please help
ThanksHi,
Refer the below forum link for more information:
Universe object format in Web Intelligence
I guess you can do some changes in the format of Universe object and use it in Webi.
-Noor. -
Error when passing data from app server...
Hello Experts,
I am encountering an error when trying to pass data from application server
to my internal table. Below is the error:
"You cannot convert the character set"
Hope you can help me guys.Thank you and take care!Hi ,
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures. The code is base on uploading a simple txt file.
REPORT zuploadtab .
PARAMETERS: p_infile LIKE rlgrap-filename
OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
name1 like pa0002-VORNA,
name2 like pa0002-name2,
age type i,
END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
CLEAR: wa_string, wa_uploadtxt.
READ DATASET ld_file INTO wa_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
APPEND wa_upload TO it_record.
ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
write:/ sy-vline,
(10) wa_record-name1, sy-vline,
(10) wa_record-name2, sy-vline,
(10) wa_record-age, sy-vline.
endloop.
Reward points if it is usefull ..
Girish -
Passing parameters from Excel to SQL stored proc. to analyse resultset in PowerPivot
Hi,
Not sure if I posted this question at the right forum ...
I would like to implement the following scenario:
- Enter parameters @startdate and @enddate in cells in an Excel worksheet (i.e. cell A2 has the value for the startdate parameter; cell B2 has the value for the endate parameter).
- Pass these parameters to a SQL stored procedure (using MSQuery?). See below.
- Calling stored procedure in PowerPivot to get the resultset in PowerPivot.
The SP calls some functions in SQL Server. See below.
I have read several posts on several forums but I can't get the parameters from Excel (MSQuery?) to the SP.
What's the best way to have PowerPivot picking up the resultset from the SP?
How do I get the Excel cells A2 and B2 to the SP below?
SP:
USE [Test]
GO
/****** Object: StoredProcedure [dbo].[_Pink_SP_CapaciteitTest] Script Date: 29-7-2014 15:41:04 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[_Pink_SP_CapaciteitTest]
@startdate DATETIME,
@enddate DATETIME
AS
BEGIN
SET NOCOUNT ON
SET DATEFIRST 1
DECLARE @TempCapacity TABLE
ResourceNo INT,
ResourceName NVARCHAR(60),
JobCode NVARCHAR(12),
JobDescription NVARCHAR(50),
CostcenterCode NCHAR(8),
CostcenterDescription NVARCHAR(50),
CostcenterClass NVARCHAR(30),
CostcenterClassDescription NVARCHAR(60),
Date DATETIME,
Weekday INT,
WeekNo INT,
Month INT,
Year INT,
Capacity FLOAT,
ConsultancyTot FLOAT,
ConsultancyTotReserved FLOAT,
Sick FLOAT,
Doctor FLOAT,
Pregnant FLOAT,
Vacation FLOAT,
VacationCancellation FLOAT,
SpecialLeave FLOAT,
CompHours FLOAT,
Support FLOAT
INSERT INTO @TempCapacity
SELECT h.res_id AS ResourceNo,
h.fullname AS ResourceName,
h.job_title AS JobCode,
j.descr50 AS JobDescription,
h.costcenter AS CostcenterCode,
cc.oms25_0 AS CostcenterDescription,
ccc.CostcenterClassCode AS CostcenterClass,
ccc.Description AS CostcenterClassDescription,
CONVERT(VARCHAR(10), t.datum, 105) AS [Date],
DATEPART(DW, t.datum) AS [Weekday],
(SELECT [dbo].[ISOWeekNumber] (t.datum)) AS WeekNo,
MONTH(t.datum) AS [Month],
YEAR(t.datum) AS [Year],
(SELECT ROUND([dbo].[HRCapacityHours] (h.res_id, t.datum, t.datum), 2)) AS Capacity,
(SELECT ISNULL([dbo].[HRAbsenceHours] (50, h.res_id, t.datum, t.datum + 1), 0)) AS ConsultancyTot,
(SELECT ISNULL([dbo].[HRAbsenceHours] (51, h.res_id, t.datum, t.datum + 1), 0)) AS ConsultancyTotReserved,
(SELECT ISNULL([dbo].[HRAbsenceHours] (9538, h.res_id, t.datum, t.datum + 1), 0)) AS Sick,
(SELECT ISNULL([dbo].[HRAbsenceHours] (8531, h.res_id, t.datum, t.datum + 1), 0)) AS Doctor,
(SELECT ISNULL([dbo].[HRAbsenceHours] (9924, h.res_id, t.datum, t.datum + 1), 0)) AS Pregnant,
(SELECT ISNULL([dbo].[HRAbsenceHours] (8501, h.res_id, t.datum, t.datum + 1), 0)) AS Vacation,
(SELECT ISNULL([dbo].[HRAbsenceHours] (8551, h.res_id, t.datum, t.datum + 1), 0)) AS VacationCancellation,
(SELECT ISNULL([dbo].[HRAbsenceHours] (8511, h.res_id, t.datum, t.datum + 1), 0)) AS SpecialLeave,
(SELECT ISNULL([dbo].[HRAbsenceHours] (9518, h.res_id, t.datum, t.datum + 1), 0)) AS CompHours,
(SELECT ISNULL([dbo].[HRAbsenceHours] (3200, h.res_id, t.datum, t.datum + 1), 0)) AS Support
FROM humres h (NOLOCK)
LEFT OUTER JOIN hrjbtl j (NOLOCK) ON h.job_title = j.job_title
LEFT OUTER JOIN kstpl cc (NOLOCK) ON h.costcenter = cc.kstplcode
LEFT OUTER JOIN CostcenterClasses ccc (NOLOCK) ON cc.Class_01 = ccc.CostcenterClassCode AND ccc.ClassID = 1
CROSS APPLY (SELECT * FROM [dbo].[AllDays] (@startdate, @enddate)) t
WHERE h.ldatindienst <= t.datum
AND ISNULL(h.ldatuitdienst, t.datum) >= t.datum
AND h.fullname NOT LIKE '%inhuur%'
AND h.emp_type IN ('E', 'C')
AND h.job_title IN ('F09CONS', 'F09PRIN')
ORDER BY h.fullname,
t.datum
SELECT * FROM TempCapacity
END
Thanks!Hi,
According to your description, I think you want to call a store procedure in PowerPivot with the parameters which are stored in the cells of an Excel workbook.
Are you using the PowerPivot add-in in Excel or PowerPivot in SQL Server?
This forum is to discuss problems of Office development such as VBA, VSTO, Apps for Office .etc. If you are using Excel PowerPivot, since it is an add-in for Excel and it doesn't publish API for us, we cannot automatically call a stored procedure in Excel.
We can get the data from Cells A2 and B2 with code, but it's hard to set it as the parameters of a SP when calling it from PowerPivot. About calling a SP from Excel manually, you could post in
Excel IT pro forum for more effective responses.
If you are using PowerPivot in SQL Server, I'm afraid your issue is more related to the feature of PowerPivot. We can get data from SQL Server database into Excel workbook, but I'm not sure whether we can get data from Excel cells in SQL Server. So I suggest
you posting in
SQL Server PowerPivot forum for more effective responses.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
OnSubmit function Error in passing values from WDA Adobe Form to Ztable
Friends,
I am trying to pass values from Adobe Interactive Form to ztable.
I am using WDA to display the form. I have created the form context with attributes that are bound to the form fields using the Adobe Livecycle Designer.
Once the user presses the Submit button, the data is passed to the ztable. In the onSubmit function assigned to the Submit button, I am using the "Read Context" feature of WD Code Wizard to read the values of the attributes
I am able to read and populate the ztable with values of the first 3 attributes. But am unable to read the value of 4th attribute using the "Read Context" feature of WD Code Wizard. All 4 attributes are of string type.
I am not sure if this is a buffer size problem or is there a limitation that only 3 attributes can be read per Adobe form / onSubmit function.
Please let me know what is missing.
Thanks and Regards.Resolved
-
Error While Passing Parameter from Form to Report
I am using Dev 9ids. And i am compiling every forms from form 5 to form 9i. and report too.
Most of reports are running.
in some i am getting problem where i do pass more than 5,6 parameters.
for e.g in one case say
set_report_object_property(rep_id,REPORT_OTHER,'comp_code='||:global.vc_comp_code||' inv='||inv||' invoice_no='||inv_no||' invoice_date='||inv_dt||' vc_name='||cust_name||' Paramform=no');
this will not run and give error FRM-41214
when i exclude vc_name or shorten the value of cust_name report run fine.
length of cust_name and in report vc_name is proper.
I also need to pass more parameters to report.
I do think there might be parameter size in any of report system files to be increased.
Pls help me out how to rectify this problem.
thanks in advance.
rajYou are not getting the result in the report because you have chosen the button event as Query.
Edit the form, for the Execute button, choose the button event Custom and use the same pl/sql code that you have used before.
If the event is Query, then the session object does not have value of A_EMPNO at the point where you have written your code. The session object is populated after the Query event has taken place. -
Error in passing parameters from Form to Report
Hi All
I am using 9ids
I want to run report from a form
From one procedure as
vc_runformat:= 'htmlcss'; vc_reportserver:=:Global.repsrv;
set_report_object_property(rep_id,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(rep_id,REPORT_COMM_MODE,SYNCHRONOUS);
set_report_object_property(rep_id,REPORT_DESTYPE,CACHE);
set_report_object_property(rep_id,REPORT_DESFORMAT,vc_runformat);
set_report_object_property(rep_id,REPORT_SERVER,vc_reportserver);
set_report_object_property(rep_id,REPORT_OTHER,'comp_code='||:global.vc_comp_code||' vc_name='||cust_name||' inv='||inv||' invoice_no='||inv_no||' invoice_date='||inv_dt||' Paramform=no');
vc_reportserverjob:=RUN_Report_Object(rep_id);
vjob_id:=substr(vc_reportserverjob,length(vc_reportserver)+2,length(vc_reportserverjob));
vc_rep_status :=REPORT_OBJECT_STATUS(vc_reportserverjob);
if vc_rep_status='FINISHED' then
web.show_document('/reports/rwservlet/getjobid'||vjob_id||'?
server='||vc_reportserver,'_blank');
else
set_alert_property('alert_ok',alert_message_text,'Report failed with error message '||vc_rep_status||' !');
al:=show_alert('alert_ok');
end if;
END;
Report does not run
now what i have found while rnd that
when i pass a lot of userdefined argument
it gives error.
and if passed one,two,three userdefined argument than it works.
in this example only
when i passed
inv='10016'
dt='06-09-2003'
inv_no='010016'
comp_code='01'
vc_name='PRODIMPEX'
with these reports run fines but
when i increase name data with one caharacter also it gives error
say
vc_name='PRODIMPEXR'
report does not run.
vc_name in report has character type with length 100
but a lot of argument is to be passed more.
I have also checked variable length. its fine
i think there would be some setting in some report system file having the length of parameters
which can be passed.
please help me if u know this.
thanks in advanceHi,
this sounds familiar. Didn't you post exactly the same question a couple of weeks ago ? Don't remember what I replied to you, possibly to use varchar2 instead of character and give it a try. If this doesn't work, I remember that there is a way to use serverside command files for common parameters that needs to be passed. At least I can not find any bug filed against this. If the behavior doesn't change to teh better I therefore suggest to talk to customer support and file a bug.
Frank -
Passing variables from .bat to .sql in instance creation scripts
Hi all,
In the classical instance creation scripts numerous parameters are repeated even if they are similar. For example, the directory into which saving the different tablespaces is often the same. Also i'm looking for passing them as parameters from the .bat launching the instance creation. My first tries give the following:
-> In the .bat launching the creation:
set MY_DB_USER=sys
set MY_DB_PWD=change_on_install
set MY_DB_NAME=DragNFly
set ORACLE_SID=DragNFly
set MY_DB_CREATION_SOURCE=F:\Oracle\oradata\Instance_creation_scripts
set MY_DB_CREATION_DESTINATION=E:\Oracle_DragNFly
set MY_ORACLE_BIN=F:\oracle\bin
set MY_ORACLE_HOME=F:\oracle
mkdir %MY_ORACLE_HOME%\admin\%ORACLE_SID%\bdump
mkdir %MY_ORACLE_HOME%\admin\%ORACLE_SID%\cdump
mkdir %MY_ORACLE_HOME%\admin\%ORACLE_SIDD%\create
mkdir %MY_ORACLE_HOME%\admin\%ORACLE_SID%\udump
mkdir %MY_DB_CREATION_DESTINATION%\%ORACLE_SID%
%MY_ORACLE_BIN%\oradim.exe -new -sid %ORACLE_SID% -startmode m
%MY_ORACLE_BIN%\oradim.exe -edit -sid %ORACLE_SID% -startmode a
%MY_ORACLE_BIN%\orapwd.exe file=%MY_ORACLE_HOME%\Database\PWD%MY_DB_NAME%.ora password=%MY_DB_PWD%
%MY_ORACLE_BIN%\sqlplus /nolog connect %MY_DB_USER%/%MY_DB_PWD% @%ORACLE_SID% as sysdba
%MY_ORACLE_BIN%\sqlplus /nolog @%MY_DB_CREATION_SOURCE%\StartCreation.sql
-> Then in the first sql file, fixing all the variables and calling the other ones:
DEFINE MY_DB_USER=SYS
DEFINE MY_DB_PWD=change_on_install
DEFINE MY_DB_NAME=DragNFly
DEFINE MY_DB_SID=DragNFly
DEFINE MY_DB_CREATION_DESTINATION=E:\Oracle_DragNFly
DEFINE MY_DB_CREATION_SOURCE=F:\Oracle\oradata\Instance_creation_scripts
DEFINE MY_ORACLE_BIN=F:\oracle\bin
DEFINE MY_ORACLE_HOME=F:\oracle
connect &&MY_DB_USER/&&MY_DB_PWD as SYSDBA
-- # The following files have to be stored in the #
-- # same repertory as the present file #
@@CreateDBdb &&MY_DB_USER &&MY_DB_PWD &&MY_DB_NAME &&MY_DB_SID &&MY_DB_CREATION_DESTINATION &&MY_DB_CREATION_SOURCE &&MY_ORACLE_BIN &&MY_ORACLE_HOME
@@CreateDBtbs &&MY_DB_USER &&MY_DB_PWD &&MY_DB_NAME &&MY_DB_SID &&MY_DB_CREATION_DESTINATION &&MY_DB_CREATION_SOURCE &&MY_ORACLE_BIN &&MY_ORACLE_HOME
@@CreateDBcat &&MY_DB_USER &&MY_DB_PWD &&MY_DB_NAME &&MY_DB_SID &&MY_DB_CREATION_DESTINATION &&MY_DB_CREATION_SOURCE &&MY_ORACLE_BIN &&MY_ORACLE_HOME
@@postDBcreate &&MY_DB_USER &&MY_DB_PWD &&MY_DB_NAME &&MY_DB_SID &&MY_DB_CREATION_DESTINATION &&MY_DB_CREATION_SOURCE &&MY_ORACLE_BIN &&MY_ORACLE_HOME
@@CreateDBuser &&MY_DB_USER &&MY_DB_PWD &&MY_DB_NAME &&MY_DB_SID &&MY_DB_CREATION_DESTINATION &&MY_DB_CREATION_SOURCE &&MY_ORACLE_BIN &&MY_ORACLE_HOME
exit;
-> Finally one example of use in CreateDB.sql is:
connect &&1/&&2 as SYSDBA
set echo on
spool &&5\&&3\Create&&3.db.log
startup nomount pfile="&&6\init_DB.ora";
CREATE DATABASE &&3
MAXINSTANCES 1
MAXLOGHISTORY 1
MAXLOGFILES 5
MAXLOGMEMBERS 3
MAXDATAFILES 100
DATAFILE '&&5\&&3\system_&&3.01.dbf' SIZE 200M REUSE AUTOEXTEND ON NEXT 10M MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
DEFAULT TEMPORARY TABLESPACE &&3._TMP TEMPFILE '&&5\&&3\temp_&&3.01.dbf' SIZE 1500M REUSE
UNDO TABLESPACE "&&3._UNDO" DATAFILE '&&5\&&3\undo_&&3.01.dbf' SIZE 500M REUSE
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 ('&&5\&&3\redo_&&3.01.log', '&&5\&&3\redo_&&3.01bis.log') SIZE 102400K,
GROUP 2 ('&&5\&&3\redo_&&3.02.log', '&&5\&&3\redo_&&3.02bis.log') SIZE 102400K,
GROUP 3 ('&&5\&&3\redo_&&3.03.log', '&&5\&&3\redo_&&3.03bis.log') SIZE 102400K;
spool off;
As you can see a first problem is that i have to set the variables the first time in the .bat and a second time in the first .sql. I don't know how to use an unique file for setting all the variables i need.
Second difficulty is: fixing names and directories is a first step but i would like to fix all the different size values in this same file. The goal is to have only one file with dozen of values to change before creating new instances instead of checking all the different parameters inside of the different files.
Third problem: variables are not transmitted to the init.ora. I think that it's possible to generate it using template and the defined variables, but i don't try for the moment.
What is your mind on this?
Probably there are better examples that i don't found?
Regards,
Tifthe problem is nothing your showed. did you see a security warning that you ignored?
to test, if that's the problem go here and adjust your security settings: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml
if that fails, upload your files to a server and confirm everything works. then start working on your local configuration. -
Error while passing table from R/3 to XI
Hi All
I am trying to send data from R/3 to XI using a Remote function module. I have done the following.
1. Created a RFC connection (type T), assigned a program ID and checked the Registered the program.
2. Created a communication channel as Sender RFC and assigned the same Program ID.
I tested the RFC connection, It works fine.
3. Now, I have created a function module Z_SEND_DATA, which extracts the data from the table and passes the table (an internal table is formed) to another wrapper function module (Z_WRAPPER) which has Table as of the parameter.
4. The Wrapper function module is imported to Integration Repository.
Now, when i execute the Z_SEND_DATA function module, t extracts the data and passes the table to Z_WRAPPER. ( Confirmed by debugging), but the function module does not pass the information to XI.
When I checked SM59, there is a log "Server repository could not create a Function template for Z_WRAPPER".
Not sure why I get the above error, please help.
Thanks
RakeshHi Sreeram
I am not sure how do we specify the "Queue name".
We call the wrapper FM by
Call 'Z_WRAPPER' in background task destination 'SAPXIDEST'
here, SAPXIDEST is the RFC destination,
please let me know what does the the error " Server repository could not create a Function template for Z_WRAPPER", mean ??
Thanks
Rakesh
Message was edited by:
Rakesh teki -
Patching: HTTP errors when downloading blobs from proxy controller to agent
Hi all,
I have a persistent issue which I can't figure out. Oracle support aren't much help.
When applying a Recommended Baseline patchset to our managed Solaris 10 servers, I have observed that blobs are downloaded to the target servers at a rate of 1-2 blobs per minute. I consider this to be quite slow, but that's not my main problem.
At some point during the blob downloads, http errors start appearing in /var/scn/update-agent/logs/error.log on the target server....
HTTP request failed. Reason: Moved temporarily.
HTTP request failed. Reason: Bad gateway.
Eventually, the blob download job fails completely...
118099456 Download aborted.
Our servers are quite a way behind in their patching levels. Consequently, we often need to apply as many as 200 patches to a single server. We are lucky to download 100 patches (blobs) before the http errors begin.
The errors would seem to indicate that the http servers on the proxy controllers are refusing any further connections midway through the blob downloads. I have tried tweaking the httpd.conf file on the proxy controllers - increased the number of httpd processes running and increased MaxClients to 100. None of this has helped.
The proxy controllers have interfaces on the same subnet as the target servers. Network performance between proxy and asset is good.
Has anyone else experienced similar issues with patching ?
Does anyone have any suggestions for httpd.conf settings on the Proxy Controllers ?
Cheers,
GrahamSo I have figured out the issue and as Eddie mentioned it is because the email attribute is not synced. For some reason when I go into Manage User Profiles I am unable to edit anything, i.e. I cannot add the email address.
I am able to create a whole new user, which I did (already existed in AD) and of course included the email attribute. When I sign into sharepoint with this user I am then able to view IRM protected documents.
I cannot figure out why the email attribute is not synced to SP. As mentioned above it seems the UPS does not work in a standalone SP install, but my undesrtanding is that when i sign into SP it is going to AD to autheticate, so why then does it not
also retrieve the email attribute as well?
I created an SharePoint Active Directory Import job, it runs successfully, it imports all my users from AD, but again without the eamil attribute! Very strange. If anyone has any clues I am all ears. -
Error while passing values from Interactive form to Webdynpro Application
Hi,
Iam working on AdobeInteractive Forms using GP.There is an interactive form with a submit button on my desktop. Now when i click on submit the values in the Interactive Form should be passed to an Webdynpro application.But when i click on submit button i was getting error.Can any one solve my issue.
The Error is:
SAP Guided Procedures - Error Page
What happened?
An internal error occurred while processing your request
What can you do?
Try again later. If the problem persists, contact your system administrator.
Additional Error Information
Error while processing document via ADS
com.sap.caf.eu.gp.base.exception.EngineException: Error while processing document via ADS
at com.sap.caf.eu.gp.model.iforms.adapter.pdf.AdobePDFAdapter.processPDF(AdobePDFAdapter.java:842)
at com.sap.caf.eu.gp.model.iforms.adapter.pdf.AdobePDFAdapter.getSessionContext(AdobePDFAdapter.java:1116)
at com.sap.caf.eu.gp.model.iforms.postproc.FormPostprocessor.processData(FormPostprocessor.java:396)
at com.sap.caf.eu.gp.model.iforms.FormPostProcessor.doPost(FormPostProcessor.java:182)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Processing exception during a "GetData" operation. Request start time: Thu May 01 12:33:23 CDT 2008 com.adobe.ProcessingException: Error creating PDF Document - PDF Exception: Stream does not represent a PDF document. [Ljava.lang.StackTraceElement;@309d01f5 Exception Stack Trace: com.adobe.ProcessingException: Error creating PDF Document - PDF Exception: Stream does not represent a PDF document. [Ljava.lang.StackTraceElement;@309d01f5
at com.adobe.ads.remote.PDFState.getDocumentFromFile(Unknown Source)
at com.adobe.ads.remote.PDFState.getDocument(Unknown Source)
at com.adobe.ads.remote.EJB_PDFAgent.exportFormData(Unknown Source)
at com.adobe.ads.operation.GetData.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.adobe.internal.pdftoolkit.core.exceptions.PDFCosParseException: Stream does not represent a PDF document.
at com.adobe.internal.pdftoolkit.core.cos.CosDocument.init(Unknown Source)
at com.adobe.internal.pdftoolkit.core.cos.CosDocument.<init>(Unknown Source)
at com.adobe.internal.pdftoolkit.core.cos.CosDocument.newDocument(Unknown Source)
at com.adobe.internal.pdftoolkit.pdf.document.PDFDocument.<init>(Unknown Source)
at com.adobe.internal.pdftoolkit.pdf.document.PDFDocument.newInstance(Unknown Source)
... 35 more
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:413)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.getData(PDFObject.java:311)
at com.sap.caf.eu.gp.model.iforms.adapter.pdf.AdobePDFAdapter.processPDF(AdobePDFAdapter.java:816)
... 19 more
Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Processing exception during a "GetData" operation. Request start time: Thu May 01 12:33:23 CDT 2008 com.adobe.ProcessingException: Error creating PDF Document - PDF Exception: Stream does not represent a PDF document. [Ljava.lang.StackTraceElement;@309d01f5 Exception Stack Trace: com.adobe.ProcessingException: Error creating PDF Document - PDF Exception: Stream does not represent a PDF document. [Ljava.lang.StackTraceElement;@309d01f5
at com.adobe.ads.remote.PDFState.getDocumentFromFile(Unknown Source)
at com.adobe.ads.remote.PDFState.getDocument(Unknown Source)
at com.adobe.ads.remote.EJB_PDFAgent.exportFormData(Unknown Source)
at com.adobe.ads.operation.GetData.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.adobe.internal.pdftoolkit.core.exceptions.PDFCosParseException: Stream does not represent a PDF document.
at com.adobe.internal.pdftoolkit.core.cos.CosDocument.init(Unknown Source)
at com.adobe.internal.pdftoolkit.core.cos.CosDocument.<init>(Unknown Source)
at com.adobe.internal.pdftoolkit.core.cos.CosDocument.newDocument(Unknown Source)
at com.adobe.internal.pdftoolkit.pdf.document.PDFDocument.<init>(Unknown Source)
at com.adobe.internal.pdftoolkit.pdf.document.PDFDocument.newInstance(Unknown Source)
... 35 more
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:400)
... 21 moreHi Praveen,
The concept what we have observed is When you click on Submit the values were sent to GP. There GP framework takes care of all these. After that when you try to login to Portal and click on GP Inbox and try to open the application, what ever the data that is sent previously will be retrieved.
Due to some reasons like Delegation and other conecpts where GP will not fit we have scrapped GP and got back to workflow. There we have used the concept of Portal Webservice inorder to send the data to R/3 by clicking on Submit button.
We have successfully implemented the Adobe Forms Offline Scenario using Portal Webservice. -
Error while passing file from webdynpro screen to DMS server to gene DMS no
hello gurus,
i have one requirement in webdynpro abap.i need somme stuff to achive this.let me explain my requirement first.
i have one view as main having file upload UI element and one action button as CREATE. now i perform browse and selected one file . now i am going to perform action on that create button it is should generate one DMS document number against the selected file and strore this file in DMS storage location.for this i have used 'BAPI_DOCUMENT_CREATE2' bapi inside Action of CREATE BUTTON. but it is showing error like 'Error while checking in and storing: D:\file1.doc'
TYPE E
ID 26
NUMBER 253
MESSAGE Error while checking in and storing: D:\file1.doc
but when i am executing the BAPI 'BAPI_DOCUMENT_CREATE2' directly while passing the same data to bapi it is generating the document number perfectly.
i am new for this webdynpro could you please suggest me how can i overcome this problem.
regards.
babu.Hi,
This is not error with respect to WD. you can check same problem in thread Error while checking in and storing: C:Userscbt.abapDesktopLOP.XLS
I guess this will solve your problem.
Thanks,
Chandra -
Pass output from PL/SQL proc back to ODI for logging
Hi,
In ODI (10g), is there any way to pass output from a PL/SQL procedure back to the calling stage?
I am working on the run time of a batch, one part of which calls a procedure and so currently black box.
I'd like to instrument the proc so that I can see in Operator some kind of timed activity so that I can profile its activity better.
The best I've had suggested so far is to write out to file from the procedure and then use ODI to parse this and spit it out in the stage log. I don't like this approach for two reasons:
1) Our DBAs quite rightly get very itchy with the privs required for writing to files, and another app to read from the same
2) It's messy :)
Any ideas?
thanks, Robin.Robin
I don't know ODI. However if you are calling a stored proc procA and you have control over what you call, at the very least you could write a wrapper procB as
CREATE OR REPLACE PROCEDURE PROCB (parms)
AS
BEGIN
SYS.DBMS_MONITOR.SESSION_TRACE_ENABLE();
MYUSER.PROCA(parms);
SYS.DBMS_MONITOR.SESSION_TRACE_DISABLE();
END;
/ If ODI sets service,module and action (as it should) then you could ask the DBA to set SERV_MOD_ACT_TRACE_ENABLE instead.
Niall Litchfield
http://www.orawin.info/
Maybe you are looking for
-
I have one computer and one iTunes library and two devices hooked up to it. But I have to apple IDs a different one for each of the two devices. When I try to buy or update something using my account and password it asks for the other account passwor
-
How can i attach scrollbar to my tab canvas?
-
Starting the reports server as a servlet
Dear friends, I'm trying to run a JSP Report which was built with JDev and Report Builder, but when I compiled the JSP Report on JDev, the Internet Browser has started with the LOADING... page and nothing happened. I have Report Services and HTTP Ser
-
Deliminator problem with StringTokenizer
String str = "xxx-----xxx-----xxx-----xx-x-----xxx-----xxx"; StringTokenizer st = new StringTokenizer(str, "-----"); I am expecting 6 tokens, but get 7 tokens. Why does it treat "-" as a deliminator when I set the deliminator to "-----". Any fix for
-
Can i use pro res files in iMovie even though i don't have Final Cut Pro?
Hello, I'm expecting some film footage to be delivered to me thats being delivered in a Pro Res format. Since my request to the company I've realised that it seems that I might not be able to import the Pro Res files into iMovie on my iMac if I don't