Error in phase SCEXEC_ALIAS in upgrade process(during preprocessing)

Hi all experts,
i encountered error during upgrade from 4.7 to ecc 6
with message :
severe error during SCEXEC_ALIAS phases
file /usr/sap/<SID>/upg/abap/log/PTALDC00.LOG not found
below is some related log content for this error:
tail log of ULOG11_2
Phase SCEXEC_ALIAS:
<sid>adm       20110527220015    : /usr/sap/<SID>/upg/abap/exenew/tp pf=/usr/sap/<SID>/upg/abap/bin/EXDBNEW.TPP execdbscript <SID> -x PTALDC00.XQL DBEXECNONT DBEXECNOCHECK  (pid=512002)
<sid>adm       20110527220016    : /usr/sap/<SID>/upg/abap/exenew/tp pf=/usr/sap/<SID>/upg/abap/bin/EXDBNEW.TPP execdbscript <SID> -x PTALDC01.XQL DBEXECNONT DBEXECNOCHECK  (pid=1204298)
<sid>adm       20110527220017    :/usr/sap/<SID>/upg/abap/exenew/tp pf=/usr/sap/<SID>/upg/abap/bin/EXDBNEW.TPP execdbscript <SID> -x PTALDC02.XQL DBEXECNONT DBEXECNOCHECK  (pid=675990)
tail log of SLOG701
Phase SCEXEC_ALIAS:
ERROR: Connect to <SID> failed (20110527190129, probably wrong environment).
ERROR: Connect to <SID> failed (20110527190130, probably wrong environment).
ERROR: Connect to <SID> failed (20110527190131, probably wrong environment).
my questions are:
1. where is the environment variable stored during this phase which is used by tp tool?
i have checked the profile EXDBNEW.TPP and compared it with other profile in the same directory which have been used by tp before(phases before this one), which resulted in no different for every environment related value.
2. i tried to emulate the execution of the command in ULOG11_2 with default environment of <sid>adm with adjustments(e.g db_ora_scheme=SHDTMP, DIR_LIBRARY= /usr/sap/<SID>/abap/exenew) it run with no error of wrong environment whatsoever >.<, so can i just point the environment scheme to <SID>SHD  and executed it manually?

well, actually i did not looking at the right place at the error , my apologize for that.
there are another error messages at this log file SCEXEC_A.ECO
TRACE-INFO: 68:  [dev trc    ,00000]  -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=110b1b588)                          20  0.209414
TRACE-INFO: 69:  [dev trc    ,00000]        SELECT USERID,PASSWD FROM SAPUSER WHERE USERID IN (:A0,:A1)                                                            
TRACE-INFO: 70:                                                                                11  0.209425
TRACE-INFO: 71:  [dev trc    ,00000]  -  oci_bind  ( 0: SQLT_STR, l=256, con_hdl=0, stmth_p=110b1b588, vp=9001000a10b6ea2,ip=0,rlp=0,rcp=0)
TRACE-INFO: 72:                                                                                21  0.209446
TRACE-INFO: 73:  [dev trc    ,00000]  -  oci_bind  ( 1: SQLT_STR, l=256, con_hdl=0, stmth_p=110b1b588, vp=fffffffffffd978,ip=0,rlp=0,rcp=0)
TRACE-INFO: 74:                                                                                14  0.209460
TRACE-INFO: 75:  [dev trc    ,00000]  -->oci_define ( 0: SQLT_STR, l=256, con_hdl=0, stmth_p=110b1b588, vp=fffffffffffda78,ip=fffffffffffd7a0,rlp=0,rcp=0)
TRACE-INFO: 76:                                                                                13  0.209473
TRACE-INFO: 77:  [dev trc    ,00000]  -->oci_define ( 1: SQLT_AFC, l=256, con_hdl=0, stmth_p=110b1b588, vp=fffffffffffdb78,ip=fffffffffffd7a2,rlp=0,rcp=0)
TRACE-INFO: 78:                                                                                16  0.209489
TRACE-INFO: 79:  [dev trc    ,00000]  -->oci_execute_stmt(con_hdl=0, stmth_p=110b1b588, iters=1, rowoff=0, dml_batch_errors=0)
TRACE-INFO: 80:                                                                                13  0.209502
TRACE-INFO: 81:  [dev trc    ,00000]  OCIStmtExecute() completed, rc=100=OCI_NO_DATA, no further data                  8738  0.218240
TRACE-INFO: 82:  [dev trc    ,00000]    -> rc=1403=OCI_ERR_NOT_FOUND                                                    18  0.218258
TRACE-INFO: 83:  [dev trc    ,00000]  <--oci_execute_stmt(rc=1403, iters-errors = 1-0) [time 0,009s]                    11  0.218269
TRACE-INFO: 84:  [dbsloci.    ,00000]  *** ERROR => ORA-1403 when accessing table SAPUSER                                15  0.218284
TRACE-INFO: 85:  [dev trc    ,00000]    set_ocica() -> SQL code 1403                                                    8  0.218292
TRACE-INFO: 86:  [dev trc    ,00000]  -->oci_get_errmsg (con_hdl=0, rc=1403)                                              7  0.218299
TRACE-INFO: 87:  [dev trc    ,00000]    OCIErrorGet -> SQL error code: 1403                                            20  0.218319
TRACE-INFO: 88:  [dev trc    ,00000]    ORA-01403: no data found      
TRACE-INFO: 101:  [dev trc    ,00000]  Assigning username to user session: con_hdl=0, usrhp=110c09428                      8  0.219570
TRACE-INFO: 102:  [dev trc    ,00000]  Assigning password to user session: con_hdl=0, usrhp=110c09428                    12  0.219582
TRACE-INFO: 103:  [dev trc    ,00000]  Starting user session: OCISessionBegin(con_hdl=0, usr=SAPR3SHD/<pwd>, svchp=110b045e0, srvhp=110b05e88, usrhp=110c09428)
TRACE-INFO: 104:                                                                                133  0.219715
TRACE-INFO: 105:  [dev trc    ,00000]    OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR                        6298  0.226013
TRACE-INFO: 106:  [dev trc    ,00000]    OCISessionBegin(OCI_DEFAULT) failed with SQL error 28000:                      11  0.226024
TRACE-INFO: 107:  [dev trc    ,00000]    ORA-28000: the account is locked                                                                              
TRACE-INFO: 108:                                                                                10  0.226034
TRACE-INFO: 109:  [dev trc    ,00000]  server_detach(con_hdl=0,stale=1,svrhp=110b05e88)                                    8  0.226042
TRACE-INFO: 110:  [dev trc    ,00000]  Detaching from DB Server (con_hdl=0,svchp=110b045e0,srvhp=110b05e88)                9  0.226051
TRACE-INFO: 111:  [dev trc    ,00000]  Deallocating server context handle 110b05e88 from con_hdl=0                      176  0.226227
TRACE-INFO: 112:  [dbsloci.    ,00000]  *** ERROR => CONNECT failed with sql error '28000'                                14  0.226241
TRACE-INFO: 113:  [dev trc    ,00000]    set_ocica() -> SQL error code 28000                                              7  0.226248
TRACE-INFO: 114:  [dev trc    ,00000]  -->oci_get_errmsg (con_hdl=0, rc=28000)                                            7  0.226255
TRACE-INFO: 115:  [dev trc    ,00000]    OCIErrorGet -> SQL error code: 28000                                            8  0.226263
TRACE-INFO: 116:  [dev trc    ,00000]    ORA-28000: the account is locked                                                                              
TRACE-INFO: 117:                                                                                10  0.226273
TRACE-INFO: 118:  [dblink      ,00433]  ***LOG BY2=>sql error 28000  performing CON [dblink#4 @ 433]                      22  0.226295
TRACE-INFO: 119:  [dblink      ,00433]  ***LOG BY0=>ORA-28000: the account is locked [dblink#4 @ 433]                      8  0.226303
From the log, the problem actually lies in authorization for ops$user + locked shadow user account. After corrected these problems, the process continued. But this still bother me how this error came up since other tp processes(phases before this one) run successfully. But i will mark this question as answered. Thanks for all the attention and hope this will help others too ^^.

Similar Messages

  • Error in phase XPRAS_AIMMRG for Upgrade from 4.7 to ERP6 ehp5 sps5

    Hi All,
    We are in process in upgrading our sandbox system from 4.7 to ERP6.0
    EHP5 SPS5.
    During the downtime step we are facing an error in phase XPRAS_AIMMRG
    Upon investigation we found that there are short dumps in the system
    due to this error.
    Below is the extract of the short dumps generated by the job RDDEXECL
    Category Internal Kernel Error
    Runtime Errors DDIC_TYPE_INCONSISTENCY
    Application Component BC-ABA-LA
    Date and Time 05.12.2011 08:58:48
    Short text
    Inconsistency in the dictionary for the structure "KOMG".
    What happened?
    Error in the SAP kernel.
    The current ABAP "SAPLF82V" program had to be terminated because
    the
    ABAP processor detected an internal system error.
    Also, We I try to check the Table KOMG in SE11 is get the below messages.
    Check table KOMG (DDIC/05.12.11/10:00)
    Append structure OILKOMG appended to table KOMG
    Append structure OIUKOMG appended to table KOMG
    No customer or SAP include SI_KOMK_CM exists
    No customer or SAP include SI_KOMP_CM exists
    No customer or SAP include CI_PRS_CPILS_2 exists
    Enhancement category 3 possible, but include or subty. not
    yet classified
    Field LGORT in table KOMG is specified twice. Please check
    KOMG-ZZMVGR4: Table TVM1T in search help attachment differs
    from table of search field
    Check on table KOMG resulted in errors
    Has anyone received the below message in XPRAS phase during the upggrade.
    Any suggestion would be most welcome.
    Regards,
    Nilesh Jagtap

    Dear Nilesh,
    The reason for this issue is that the component 'LGORT' is indeed specified twice in structure KOMG on your system.
    It might be definied in the standard include as well as in your customer include.
    Please bear in mind, that if you append customer own structures to SAP standad structures, that the component names should start with 'Z' or even better 'ZZ'.
    That prevents the case which might have happened here, that the field you have added on customer side has also been delivered as part of an SAP standard include.
    So you should change your structure accordingly.
    Note 531835 describes how to add an own field to such structures. It might also be helpful for you.
    After you have repaired your structure you can activate the structure KOMG and the issue should be solved.
    Best Regards,
    Abhishek

  • Way to increase "MAXIMUM UPTIME PROCESSES" during preprocessing phase

    Hi All,
    It has always been frustrated when your ACT_UPG, SHADOW_IMPORT_INC phases are running very slow due to low number of MAX UPTIME PROCESSES enter earlier.
    I've been looking for a method to increase MAX UPTIME PROCESSES during upgrade, or shadow instance creation, but to no avail and guru here said there's no way to amend the Uptime Processes after you input the value during the preparation phase, but just to wait until it finish.
    However, i found out this can be done by changing the value for parameter mainimp_proc in *.TPP files (located under EHPI\abap\bin). eg of *.TPP files to be changed are based on the *.ECO located under EHPI\abap\tmp)
    For instance:
    youu2019ll see below command in TPAPP.ECO file:
    EXECUTING D:\usr\sap\EHPI\abap\exe\tp.exe pf=D:\usr\sap\EHPI\abap\bin\SHDUPGIMP1.TPP
    Therefore, you can increase the number of UPTIME processes by changing the value mainimp_proc in SHDUPGIMP1.TPP
    In order to change this, first, you need to kill the R3trans processes, and SAPehpi will prompt you the error message. take this opportunity to change the parameter. Make a backup before you change any files.
    To maintain consistency, i think is good to amend parameter mainimp_proc in every *.TPP based on the time it created when you launch the EHPI. Because, SAPEHPI will generated the value you enter into *.TPP file base on the global template. Also, check on every *.ECO file in /tmp for each phase to determine what *.TPP file is being read.
    example of .TPP files:
    SHDUPGIMP1.TPP, SHADOW.TPP, DEFAULT.TPP, TOOLIMPM.TPP, TOOLIMPI.TPP, and etc
    For your information, it is not recommend to change the processes during the upgrade and you should bear your own responsibility. The purpose of this post is just for sharing.
    For my situation, my colleague has insert value "2" for MAX UPTIME PROCESSES and it's veryslow due to only 2 R3trans is running and the clock is ticking for us. I change the parameter to "6" after some analysis done how EHP read the value. The good news is i can see 6 R3trans are running and 6 Support Packages are importing in /EHPI/abap/tmp.
    Time it takes to complete had shortened tremendously and upgrade completed without any error.
    Please provide any feedback on how it works if youu2019ve tried it or going to try it in future.
    Thanks,
    Nicholas.

    > Please provide any feedback on how it works if youu2019ve tried it or going to try it in future.
    Just to throw in my EUR 0.02:
    In most cases you do an upgrade not only one on a production system but also before on a test system - or at best - on a copy of the production.
    At the end of the upgrade you get an UPGEVAL.XML file that lists the runtime of the various phases and also the configuration.
    For such huge upgrades ('real' upgrades or e. g. EHP4) we do this upgrade several times with copies of the production (3+ TB database) and try to optimize the runtime for us plus avoiding most of the errors during activation and upgrade phases. For our EHP4 project I did a total of 6 upgrades in a copy of the production to find the optimum number of processes. This implies however, that resources are available (in sense of time and hardware) but we found out from the past, that this invest is of much more use than having a trembling administrator on a sunday evening sitting there and hoping that there'll be no restore of the database necessary.
    With todays database and/or storage technologies (snaphots/clones) it's no more a big administrative task to copy a system and reset it after the upgrade and start over if it was too slow.
    Out of my experience I would say, that I'd set the parameters always as high as the number of CPUs you have on the server executing the upgrade process, it's very rare that the machine comes to its CPU limit with nowadays CPU power, even if there's the production running.
    Markus

  • Error in phase MAIN_SHADOW/START_SHDI_FIRST (Upgrade EHP)

    Hello to all,
    (This plataform is an IBM DB2 for i5/OS)
    I´m performing a Enhancement Package upgrade in our sap system from EHP3 to EHP5, but I´m stuck in phase MAIN_SHADOW/START_SHDI_FIRST (STARTS THE SHADOW SYSTEM). This error show the following message:
    severe error(s) occured in phase MAIN_SHADOW/START_SHDI_FIRST!
    Last error code set: Shadow instance couldn´t be started, check 'STARTSFI.LOG' and 'DEVTRACE.LOG'
    So, I will post here that log files.
    STARTFI.LOG:
    1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
    1 ETQ399 Phase arguments:
    2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
    4 ETQ399 Set environment for shadow connect:
    4 ETQ399 Set RFC variables for shadow connect:
    4 ETQ399 System-nr = '01', GwService = 'sapgw01'
    4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
    4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    4 ETQ399 Set tool parameters for shadow connect:
    4 ETQ399   default TPPARAM: SHADOW.TPP
    4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
    4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    2 ETQ399 Starting shadow instance
    4 ETQ359 RFC Login to: System="DEV", Nr="01", GwHost="SAPDEV", GwService="sapgw01"
    2 ETQ231 RFC Login failed
    4 ETQ359 RFC Login to: System="DEV", Nr="01", GwHost="SAPDEV", GwService="sapgw01"
    2 ETQ231 RFC Login failed
    2 ETQ399 Stopping shadow instance
    4 ETQ359 RFC Login to: System="DEV", Nr="01", GwHost="SAPDEV", GwService="sapgw01"
    2 ETQ231 RFC Login failed
    4 ETQ359 RFC Login to: System="DEV", Nr="01", GwHost="SAPDEV", GwService="sapgw01"
    2 ETQ231 RFC Login failed
    2 ETQ353 Starting system
    3 ETQ399 Executing command: 'startsap  SID(DEV) INSTANCE(01) PROFILE('/usr/sap/DEV/EHPI/abap/DEV/SYS/profile/START_DVEBMGS01_SAPDEV') TYPE(*SHD)'.
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DEV", Nr="01", GwHost="SAPDEV", GwService="sapgw01"
    2 ETQ231 RFC Login failed
    2WETQ372 test RFC failed, rc="-1"
    2EETQ399 Starting shadow instance failed
    2EETQ399 Test RFC failed finally
    DEVTRACE.LOG:
    DpShMCreate: sizeof(j2ee_adm)     3952
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 700000060000000, size: 6379664)
    DpShMCreate: allocated sys_adm at 700000060000010
    DpShMCreate: allocated wp_adm_list at 700000060002ff0
    DpShMCreate: allocated wp_adm at 7000000600031e0
    DpShMCreate: allocated tm_adm_list at 7000000600104b0
    DpShMCreate: allocated tm_adm at 700000060010500
    DpShMCreate: allocated appc_ca_adm at 700000060562e20
    DpShMCreate: allocated comm_adm at 700000060572830
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 7000000606011d0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated gw_adm at 700000060601280
    DpShMCreate: allocated j2ee_adm at 7000000606012c0
    DpShMCreate: allocated ca_info at 700000060602240
    DpCommAttachTable: attached comm table (header=700000060572830/ft=700000060572840)
    MtxInit: -2 0 0
    DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
    Mon Sep  5 22:48:58 2011
    GwISigint: received SIGINT (2), start shutdown phase
    ***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c     12995]
    Can you help me please, how to solve this error?
    Best regards,
    João Dimas - Portugal

    ... continuation...
    The dev_w0:
    M Mon Sep  5 22:48:48 2011
    M  ThInit: running on host SAPDEV
    M  calling db_connect ...
    B  Loading DB library '/usr/sap/DEV/EHPI/abap/exe/dbdb4slib.o' ...
    B  Library '/usr/sap/DEV/EHPI/abap/exe/dbdb4slib.o' loaded
    B  Version of '/usr/sap/DEV/EHPI/abap/exe/dbdb4slib.o' is "720.00", patchlevel (0.98)
    C  DB4 SQL Reparse Activated
    C  *** ERROR => dbs/db4/schema contains wrong schema name SAPR3.
    [dbsldb4.cpp  7094]
    C  Error is ignored. Schema R3DEVDATA is used.
    C  IBM i 7.1 - XDN Default
    C  XDN-Port: Assuming 9600 + sapmsDEV mod 100 = 9600
    C  as4IsHostLocal: SAPDBHOST 'SAPDEV' is local
    C  R3INLPGM: RmtExeLib from /usr/sap/DEV/EHPI/abap/exe/DBSLDB4RMT
    C  R3INLPGM: RmtExeLib is SAPDEVUPG
    C  DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.                                   
    C  QXDARECVR PTF Level is: SI37200  
    C 
    C Mon Sep  5 22:48:49 2011
    C  DbSl/DB codepage check: OK - (Unicode).
    C  Checking journal settings for QSQJRN    /R3DEVDATA : OK
    C  === Central DB connect successfull! ===
    C  === Connection settings ===
    C  connected               = TRUE
    C  con_hdl                 = 0
    C  db_handle               = 1
    C  dbhost                  = SAPDEV
    C  dbhostport              = 9600
    C  rdbname                 =                  
    C  dblib                   = R3DEVSHD
    C  r3sysle_changed         = TRUE
    C  query_compl_reval       = O
    C  dbconnecttype           = L
    C  user                    = DEV01    
    C  qaqqinilib              = Default (QUSRSYS)
    C  dbjobname               = WP00     
    C  dbjobuser               = DEV01    
    C  dbjobno                 = 012091
    C  rmtexelib               = SAPDEVUPG
    C  parallel_alter_tables   = *OFF
    C  ===========================
    C  Query options file QUSRSYS/QAQQINI not found.
    C  -----------------------------------------------------------------------------
    C  ----- DbSl EGO Structure
    C  -----------------------------------------------------------------------------
    C     SAPSYSTEMNAME               = DEV
    C     Character encoding          = UNICODE
    C     process class               = dialog process
    C     workprocess id              = 0
    C     local host                  = SAPDEV
    C     dbhost                      = SAPDEV
    C     dbhostport                  = 9600
    C     rdbname                     =                  
    C     dbname                      = DEVSAPDEV
    C     dblib                       = R3DEVSHD
    C     application server          = DVEBMGS01
    C     driver                      = DBSLDirectDrive
    C     Connect type                = LOCAL
    C     pid                         = 9088
    C     wpjobname                   = WP00
    C     wpjobuser                   = DEV01
    C     wpjobno                     = 012091
    C     DB2/400 vers. appl. server  = PASE 7.1
    C     DB2/400 vers. DB server     = V7R1
    C     da_cache_size               = 100
    C     dbsl_buffersize             = 131072
    C     reopen                      = ON
    C     timeout_retry               = 3
    C     alter_table_timeout_retry   = 3
    C     ODP threshold               = 800
    C     ODP commit thresh.          = 810
    C     ODP open thresh.            = 850
    C     QAQQINI library             = Default (QUSRSYS)
    C     Alternate QAQQINI library   = Not specified
    C     use_lobs_for_long           = ON
    C     use_lobs_for_short          = OFF
    C     single_execution_threshold  = 2000
    C     single_execution_reuse      = OFF
    C     keep_tmp_SQLpkgs            = OFF
    M Mon Sep  5 22:48:54 2011
    M  SecAudit(rsauinit): Start init of Security Audit Log for first wp.
    M  in_ThErrHandle: 1
    M  ThIErrHandle: new stat of W0 is WP_SHUTDOWN   
    M  ThIErrHandle: I'm during shutdown
    M  PfStatDisconnect: disconnect statistics
    M  ThIErrHandle: entering ThSetStatError
    M  ThShutDownServer: shutdown server
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 9088) [dpuxtool.c   327]

  • Error in Phase START_SHDI_FIRST for Upgrade to ERP6 SR3

    Hi Folks
    We are performing a test upgrade 46C to ERP6 using the SR3 CDs and I'm stuck at the START_SHDI_FIRST stage.
    It's not the "usual" .acl problem.
    Here is an excerpt from the SAPup joblog. I also get the same result if I logon as <SID>OFR add the 700 Kernel and use STARTSAP.
    Calling STRRMTDB...                                                     
    Environment variable does not exist.                                    
    Environment variable added.                                             
    Job 029650/P01OFR/STRRMTDB submitted to job queue QBATCH in library QGPL.
    Environment variable removed.                                           
    Ownership of object GETOBJINF in QTEMP type *USRSPC changed.            
    Start profile is "/usr/sap/put/P01/SYS/profile/START_DVEBMGS38_tegerppd".
    Executable directory is "/usr/sap/put/exe".                             
    Checking Kernel...                                                      
    Ownership of object GETOBJINF in QTEMP type *USRSPC changed.            
    StartInstance: Program STRSBSJOB does not exist (ILE).                  
    O4STRSAP: Starting instance 38 of system P01 on host tegerppd failed.   
    Errors occurred in command.                                             
    Errors occurred in command.  
    STRSBSJOB does exist in the Kernel library and appears in /usr/sap/put/exe as a link.
    Not sure where to go from here.
    Any suggestions?
    Thanks
    Steve

    Hi Steven,
    I think, you are trying something forbidden here ;-((
    You are in the uptime and try to use STARTSAP for the new kernel, which is not ok.
    The correct way to start the shadow is as follows:
    - logon with sidofr
    - addlible sapup
    - check, that the shadow instance is totally down - otherwise kill all processes there
      (you could use (try) the following instead as well:
       SAPUP UPGDIR('/usr/sap/put') PARMLIST('stopshd')     )
    - SAPUP UPGDIR('/usr/sap/put') PARMLIST('startshd')
    Then it is interesting to see the errors ....
    btw:
    the well-known error is really not there ?
    edtf '/usr/sap/put/X85/SYS/global/ms_acl_info'
    HOST = *      <<< correct
    Then, I do have the next idea as the new second in future "well-known-error":
    The locales in the OS will miss for DE and/or US ;-((
    In the old kernel, this was no issue, but now, SAP changed its mind and doesn't deliver them as fallback any more ;-(
    (note 1077496 tries to explain this change, but I was not able by now to understand this note or to see that it really works like this - especially as I never have the chance to install complete further languages just for this !!!)
    My check is always:
    Please check with CALL QP2TERM: (NOT QSH!)
    cd /usr/lib/nls/loc
    ls en*
    ls de*
    (normally in this directory there are links only, but you can place true
    locales here as well)
    You need at least the following ones:
    en_US.ISO8859-1
    en_US.ISO8859-1__64
    de_DE.ISO8859-1     
    de_DE.ISO8859-1__64
    => I do have all needed locales for download and place them (a bit illegal) into /usr/lib/nls/loc - if you are interested in this, let me know.
    Regards
    Volker Gueldenpfennig, consolut international ag
    http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

  • Error in PHASE PREP_EXTRACT/PREIMP: Upgrade SAP R/3 4.7 to SAP ECC 6.0 EHP4

    Hello,
    I'm currently in upgrading a SAP R/3 4.7 system to a SAP ECC 6.0 EHP4.
    Therefore I followed the Upgrade Guide from marketplace - installation- and upgrade guides - SAP ERP - SAP ERP 6.0 - SAP Enhancement Package 4 for SAP ERP 6.0 - Upgrade Guide SAP ERP including EHP4 SR1 - Unix on MaxDB.
    I downloaded media from marketplace/swdc - Installations and Upgrades - SAP Application Components - SAP ERP - SAP ERP ENHANCE PACKAGE - EHP4 FOR SAP ERP 6.0 / NW7.01 - Upgrade.
    I'm starting upgrade with upgrade master DVD 51036889_1 and      51036889_2.
    Now upgrade breaks down in phase PREP_EXTRACT/PREIMP with error:
    Severe error(s) occured in phase PREP_EXTRACT/PREIMP!
    Last error code set: Single errors (code <= 8) found in logfile 'PREIMP.ELG'
    PREIMP.ELG says:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    R3trans preimport and RETURN CODE in R710VPE.REX
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
    Kernel is stored in /usr/sap/REX/SYS/exe/run and database is ADA (maxdb).
    File R710VPE.REX says:
    4 EPU201XBEGIN OF SECTION BEING ANALYZED
    4 ETW000 R3trans version 6.13 (release 640 - 17.02.10 - 13:07:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 07.03.2011 - 15:28:36
    4 ETW000 control file: /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
    4 ETW000 > import
    4 ETW000 > file='/usr/sap/REX/upg/abap/bin/R710VPE.SAP'
    4 ETW000 > safeandslow=yes
    4 ETW000 > buffersync =yes
    4 ETW000 > commit     =1048576
    4 ETW000 > importtruncated =yes
    4 ETW000 R3trans was called as follows: R3trans -w /usr/sap/REX/upg/abap/tmp/R710VPE.REX -u 1 /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
    4 ETW000 active unconditional modes: 1
    2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
    4 EPU202XEND OF SECTION BEING ANALYZED
    Can anybody help me out here?
    Regards,
    Julia

    Hello,
    I run 'R3trans -x' command, but there was no problem - connection to database was working.
    Problem was following:
    Before starting the sdt service on host, I set environment variables JAVA_HOME and LD_LIBRARY_PATH for sidadm. That's not neccessary and that was the problem. Without setting these variables it is working now.
    Thanks,
    Julia

  • Error in phase "main_shdrun/act_upg" upgrade sapnetweaver 7.0 to EHP1

    Hello expert,
    I get error when upgrade our sapnetweaver pi 7.0 SP09 to EHP1 in phase MAIN_SHDRUN/ACT_UPG. I've try many suggestion in sdn forums, but cannot resolve my troubles. This is the content of file ACTUPG.ELG in my EHPI\abap\log:
      LIST OF ERRORS AND RETURN CODES  *******
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70105.X00
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP111 exit code           : "8"
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70106.X00
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP111 exit code           : "8"
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70010.X00
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1EEDO536X"Technical Settings" "DB6PMSQ_DB" could not be activated
    ETP111 exit code           : "8"
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70106.X00
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP111 exit code           : "8"
    I have try to edit the table from SE11, but it say: the table doesn't exist. And when i try to create the table, it's say: the table already exist.
    Please help me

    Hi,
    As described in archived SAP note that is no longer available the table DB6PMSQ_DB contains only
    SQL Cache snapshot data.
    Regarding these Technical Settings
    you can ignore these messages regarding technical settings.
    Please continue with option "Accept non severe errors and repeat phase"
    This should not cause any trouble later in the upgrade or in steps after phase ACT_UPG.
    Regards,
    Aidan

  • After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

    After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
    Tried to run firefox.exe -P but receive error message:
    XML Parsing error: undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line number 18, Column 1:
    <dialog
    ^
    Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

    Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
    Thank you very much again.
    Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
    In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

  • HT201210 I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

    I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

    Well I spoke too soon.
    The update was successful, but now I cannot connect to the 3GS data network.
    Cannot get email and cannot open a page in Safari.
    +"Safari could not open the page because the server stopped responding."+
    +"Cannot Get Mail+
    +THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
    Email and internet work fine on WiFi.........no data using 3GS network.
    Looks like I will have to revert back to old OS.

  • Errors in PHASE DIFFEX phase during the CRM 6.0 upg from CRM 5.0

    Hello,
    I am in the process of upgading our CRM systems from CRM 5.0 version to
    CRM 6.0 and having issues at the PHASE DIFFEXPADDE during the upgrade
    right after the DB_ACTION_LOWQ1 phase and ADJUSTCHK being the previous
    phase.
    We are currently at CRM 5.0 dual stack system on Linux X86_64 SLES9 and
    DB - Oracle 10.2.0.2.
    I was able to finish the PREPARE phases on both ABAP & JAVA stacks
    successfully.
    The phase DIFFEXPADDE is failing with a error message in the
    DIFFEXPA.ELG which I have mentioned below. I am also attching few other
    related logs for your reference in the attached zip file
    (DIFFEXPA_logs.rar)
    DIFFEXPA.LOG
    UpgDialog.log
    SAPECCI700.C15
    TP00.ECO
    SAPup.log
    "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI700.<SID>
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    2EETW190 "INDX" "WFMFC_INDTOR_GRP 01 " has no active
    version.
    Long text:
    Cause
    You have tried to export a Dictionary object that has no active
    version. The reason for this probably is that the author of the DD object has forgotten to activate it.
    System Response
    The transport request is not released.
    What to do
    Activate the Dictionary object and repeat the export.
    2EETP200 Export with errors, request will not be imported
    Long text:
    Cause
    The export was finished with errors or terminated (return code >=
    8).
    System Response
    The request is not imported. Instead it is set back to "can be
    changed"
    in the source system.
    What to do
    The export log contains remarks concerning the reason for the
    incorrect
    export. Correct the error and repeat the export.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI701.C15
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI702.C15
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    I am stuck at this step and unable to move forward until I get past
    this error. Please let me know how do I proceed and if you have any
    more questions.
    Would appreciate your early help!
    Thanks in advance!

    I was able to get past this issue by logging in to the client 000 and
    activate the object WFMFC_INDTOR_GRP from transaction SE11.
    Dictionary Object --> Activate from the menu bar. Gave me few warnings
    but did not error out.
    Hence went past the phase and the upgrade is progressing as of now.
    However, can you please confirm if this is a correct fix or do you want
    me to do anything different since I have not reached the MODPROF_TRANS
    phase yet.
    Thanks

  • Error in PHASE ACT_UPG: Upgrade SAP R/3 4.7 to SAP ECC 6.0 EHP

    Hello,
    I'm facing an error in phase MAIN_SHDRUN/ACT_UPG (see errors below).
    After searching for the errors I found postings with advice to change R3trans and tp to the newest version. Strangely system did not take the newest kernelpatch I stored in upgrade folder. So I changed the files in the /usr/sap/SID/abap/exe folder and repeated the phase.
    But the error is still there.
    A solution was to reset the queue, but this is only possible with help by sap.
    Error  in phase: DDIC_ACTIVATION
    So I'm waiting for their reaction since two days, but nothing happens.
    My questions are now:
    what happens if I use the option "initialize phase ACT_UPG to restart it from beginning"? Will the new R3trans be used? Have we got to to the SPDD again?
    What happens if I use the option "accept non severe errors and repeat phase ACT_UPG? Are these language errors "non-severe"?
    Errors:
    In error log ACTUPG.ELG I find logs like:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INERECRUIT.REX
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP111 exit code           : "8"
    In error log SAPup.ECO I find:
    EXECUTING /usr/sap/REX/upg/abap/exe/tp (/usr/sap/REX/upg/abap/exe/tp) pf=/usr/sap/REX/upg/abap/bin/ACTUPG.TPP put REX
    This is /usr/sap/REX/upg/abap/exe/tp version 376.01.14 (release 701)
    Warning: Parameter INTERRUPT is no longer used.
    Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
    Warning: Parameter WITH_TACOB is no longer used.
    Warning: Parameter IMPDP_BY_EVENT is no longer used.
    Warning: Parameter INTERRUPT is no longer used.
    Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
    Warning: Parameter WITH_TACOB is no longer used.
    Warning: Parameter IMPDP_BY_EVENT is no longer used.
    Looking for effective putsteps ... ... ready (looking for putsteps)
    tp finished with return code: 8
    meaning:
      A tool used by tp produced errors
    Process with ID 13163 terminated with status 8
    In the last touched SP-File SAPAAAA701.SID I can find errors like:
    "1EEDO545 "LANG" "DTEL" "*": Object information could not be imported"
    Regards,
    Julia

    After pushing the message at SAP I got the following answer:
    It is the problem from note 1417505. There is no guarantee that all objects where imported with the used R3trans. A rerun of phase will be unsuccessfully because error came up in DDIC_IMPORT.
    A reset of the queue is only possible if SPAM/SAINT is used for importing support packages. In case of upgrade, like here, the upgrade has got to be resetted as described in upgrade guide.
    After start between phase extraction and configuration the newest R3trans has got to be copied manually in /abap/exe folder.
    Regards,
    Julia

  • Error in phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC - EHP3 upgrade

    Hello all,
    Using SUM while running SCM 7.0 EHP3 upgrade I am getting error in phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC:
    Checks after phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC were negative!
    Last error code set: Single errors (code &gt; 8) found in logfile 'MVNTFDC.ELG'<br/> 1 tp processes returned errors. View latest 'TP*.ECO' files in log-directory for details
    ERROR: Detected the following errors:
    # D:\SUM\abap\log\PD000203.SCD:
    3 ETP000 NOT NULL )
    3 ETP000 ON [/BIC/FZT_DEL_C1_PSCH000]
    3 ETP000 WITH ( DATA_COMPRESSION = PAGE )
    3 ETP000
    2WETP000 11:10:14: Retcode 1: error in DDL statement for "/1CRR/TG00003781 " - repeat
    2EETP345 11:10:26: Retcode 1: SQL-error "2726-Partition function '/BIC/FZT_DEL_C1_PFUN000' uses 1 c
    2EETP345 olumns which does not match with the number of partition columns used to partition the tab
    2EETP345 le or index." in DDL statement for "/1CRR/TG00003781 "
    2 ETP000 --------------- DB-ROLLBACK() ---------------
    2EETP334 11:10:26: error in DDL, nametab for "/1CRR/TG00003781" not activated
    3 ETP000 NOT NULL )
    3 ETP000 ON [/BIC/FZT_DEL_C2_PSCH000]
    3 ETP000 WITH ( DATA_COMPRESSION = PAGE )
    ...skipped 18 more lines. Please see MVNTFDC.html for more information.
    I checked some other log files:
    MVNTFDC
    1 ETQ201 Entering upgrade-phase "MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC" ("20150203110951")
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '00', GwService = 'sapgw00' Client = '000'
    1 ETQ206 Executing pre-phase DB specific actions.
    1 ETQ200 Executing actual phase 'MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC'.
    1 ETQ399 Phase arguments:
    2 ETQ399 Arg[0] = 'TP_MOVENTABS_SHD'
    2 ETQ399 Arg[1] = 'INTDEL;INTACT;NOBUFFRESET;SHADOW_ONLY'
    2 ETQ399 Arg[2] = 'MF=F,STEP=T,RANGE-TS'
    2 ETQ399 Arg[3] = 'MVNTFDC.TP0'
    1 ETQ399 Using error summary log 'MVNTFDC.ELG'.
    1 ETQ399 Using 8 parallel processes
    2 ETQ399 Empty putsteps - configuring at least parallel batches and main import processes.
    2 ETQ399 Distribute 8 parallel processes to 2 tp and 4 R3trans.
    4 ETQ380 computing toolpath for request "TP_MOVENTABS_SHD"
    4 ETQ381 request "TP_MOVENTABS_SHD" means "tp mvntabs for shadow tables"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_SHD"
    4 ETQ399 Requirement for tp maps to 'exe'
    4 ETQ383 translates to path "D:\SUM\abap\exe"
    2 ETQ399 Starting 8 tp processes:
    4 ETQ010 Starting: tp ddlntabs operation
    3 ETQ121 20150203110952: PID 7444 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP00.ECO'.
    2 ETQ399 Started tp ddlntabs with pid 7444
    4 ETQ010 Starting: tp ddlntabs operation
    3 ETQ121 20150203110952: PID 4888 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=01" "seltsize=1" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP01.ECO'.
    2 ETQ399 Started tp ddlntabs with pid 4888
    4 ETQ010 Starting: tp ddlntabs operation
    3 ETQ121 20150203110952: PID 9100 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=02" "seltsize=2" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP02.ECO'.
    2 ETQ399 Started tp ddlntabs with pid 9100
    4 ETQ010 Starting: tp ddlntabs operation
    3 ETQ121 20150203110952: PID 736 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=03" "seltsize=3" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP03.ECO'.
    2 ETQ399 Started tp ddlntabs with pid 736
    4 ETQ010 Starting: tp ddlntabs operation
    3 ETQ121 20150203110952: PID 8864 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=04" "seltsize=4" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP04.ECO'.
    2 ETQ399 Started tp ddlntabs with pid 8864
    4 ETQ010 Starting: tp ddlntabs operation
    3 ETQ121 20150203110952: PID 9264 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=05" "seltsize=5" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP05.ECO'.
    2 ETQ399 Started tp ddlntabs with pid 9264
    4 ETQ010 Starting: tp ddlntabs operation
    3 ETQ121 20150203110952: PID 9732 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=06" "seltsize=6" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP06.ECO'.
    2 ETQ399 Started tp ddlntabs with pid 9732
    4 ETQ010 Starting: tp ddlntabs operation
    3 ETQ121 20150203110952: PID 11492 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=07" "seltsize=7" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP07.ECO'.
    2 ETQ399 Started tp ddlntabs with pid 11492
    3 ETQ123 20150203110954: PID 9264 exited with status 0 (time 0.000 real)
    2 ETQ399 tp ddlntabs finished with exit code 0.
    3 ETQ123 20150203110954: PID 7444 exited with status 0 (time 0.000 real)
    2 ETQ399 tp ddlntabs finished with exit code 0.
    3 ETQ123 20150203110954: PID 4888 exited with status 0 (time 0.000 real)
    2 ETQ399 tp ddlntabs finished with exit code 0.
    3 ETQ123 20150203110954: PID 736 exited with status 0 (time 0.000 real)
    2 ETQ399 tp ddlntabs finished with exit code 0.
    3 ETQ123 20150203110954: PID 9732 exited with status 0 (time 0.000 real)
    2 ETQ399 tp ddlntabs finished with exit code 0.
    3 ETQ123 20150203110956: PID 11492 exited with status 0 (time 0.000 real)
    2 ETQ399 tp ddlntabs finished with exit code 0.
    3 ETQ123 20150203110956: PID 9100 exited with status 0 (time 0.000 real)
    2 ETQ399 tp ddlntabs finished with exit code 0.
    3 ETQ123 20150203110956: PID 8864 exited with status 0 (time 0.000 real)
    2 ETQ399 tp ddlntabs finished with exit code 0.
    2 ETQ399 Looking for pattern 'PD00....\.SCD'
    2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD000203.SCD'.
    1 ETQ124 Scanned file 'log\PD000203.SCD' from offset 9525 to 12695 for errors.
    2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD00....\.SCD'
    2 ETQ399 Looking for pattern 'PD01....\.SCD'
    2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD010203.SCD'.
    1 ETQ124 Scanned file 'log\PD010203.SCD' from offset 3394 to 6564 for errors.
    2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD01....\.SCD'
    2 ETQ399 Looking for pattern 'PD02....\.SCD'
    2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD020203.SCD'.
    1 ETQ124 Scanned file 'log\PD020203.SCD' from offset 3394 to 6564 for errors.
    2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD02....\.SCD'
    2 ETQ399 Looking for pattern 'PD03....\.SCD'
    2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD030203.SCD'.
    1 ETQ124 Scanned file 'log\PD030203.SCD' from offset 3394 to 6564 for errors.
    2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD03....\.SCD'
    2 ETQ399 Looking for pattern 'PD04....\.SCD'
    2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD040203.SCD'.
    1 ETQ124 Scanned file 'log\PD040203.SCD' from offset 3394 to 6564 for errors.
    2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD04....\.SCD'
    2 ETQ399 Looking for pattern 'PD05....\.SCD'
    2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD050203.SCD'.
    1 ETQ124 Scanned file 'log\PD050203.SCD' from offset 3394 to 6564 for errors.
    2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD05....\.SCD'
    2 ETQ399 Looking for pattern 'PD06....\.SCD'
    2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD060203.SCD'.
    1 ETQ124 Scanned file 'log\PD060203.SCD' from offset 3394 to 6564 for errors.
    2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD06....\.SCD'
    2 ETQ399 Looking for pattern 'PD07....\.SCD'
    2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD070203.SCD'.
    1 ETQ124 Scanned file 'log\PD070203.SCD' from offset 3394 to 6564 for errors.
    2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD07....\.SCD'
    2 ETQ399 Starting 1 tp processes:
    4 ETQ010 Starting: tp ddlntabs operation
    3 ETQ121 20150203111013: PID 8692 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP00.ECO'.
    2 ETQ399 Started tp ddlntabs with pid 8692
    3 ETQ123 20150203111050: PID 8692 exited with status 8 (time 0.000 real)
    2EETQ399 tp ddlntabs failed with exit code 8.
    2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD00....\.SCD'
    1 ETQ124 Scanned file 'log\PD000203.SCD' from offset 12805 to 18826 for errors.
    4 ETQ399 html file conversion from 'D:\SUM\abap\log\MVNTFDC.ELG' to 'MVNTFDC.html' succeeded.
    4 ETQ010 Date & Time: 20150203111051 
    1EETQ399 Last error code set is: Single errors (code > 8) found in logfile 'MVNTFDC.ELG'
    1 tp processes returned errors. View latest 'TP*.ECO' files in log-directory for details
    1EETQ203 Upgrade phase "PARMVNT_FDC" aborted with errors ("20150203111051")
    TP00.ECO
    SAPup> Starting subprocess in phase 'TP_ACTION_CP2SINI' at 20150202112054
        ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
        ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
        ENV: SAPSYSTEMNAME=SCD
        ENV: dbms_type=mss
        ENV: dbs_mss_schema=scd
        PWD: D:\SUM\abap\tmp
    EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\CP2SHDI.TPP" r3e SAPKBBF740 -s SCD u18
    This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
    This is D:\SUM\abap\exe\R3trans.exe version 6.24 (release 741 - 11.08.14 - 17:21:00).
    unicode enabled version
    D:\SUM\abap\exe\R3trans.exe finished (0004).
    INFO: No client specified on command line. Taking client 0 from E070C.
    tp finished with return code: 4
    meaning:
      A tool used by tp produced warnings
    SAPup> Process with PID 7592 terminated with status 4 at 20150202112055!
    SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150202213004
        ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
        ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
        ENV: SAPSYSTEMNAME=SCD
        ENV: dbms_type=mss
        ENV: dbs_mss_schema=scd
        PWD: D:\SUM\abap\tmp
    EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
    This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
    tp finished with return code: 0
    meaning:
      Everything OK
    SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150202213118
        ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
        ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
        ENV: SAPSYSTEMNAME=SCD
        ENV: dbms_type=mss
        ENV: dbs_mss_schema=scd
        PWD: D:\SUM\abap\tmp
    EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
    This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
    tp finished with return code: 8
    meaning:
      A tool used by tp produced errors
    SAPup> Process with PID 5336 terminated with status 8 at 20150202213638!
    SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203102328
        ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
        ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
        ENV: SAPSYSTEMNAME=SCD
        ENV: dbms_type=mss
        ENV: dbs_mss_schema=scd
        PWD: D:\SUM\abap\tmp
    EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
    This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
    tp finished with return code: 0
    meaning:
      Everything OK
    SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203102350
        ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
        ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
        ENV: SAPSYSTEMNAME=SCD
        ENV: dbms_type=mss
        ENV: dbs_mss_schema=scd
        PWD: D:\SUM\abap\tmp
    EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
    This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
    tp finished with return code: 8
    meaning:
      A tool used by tp produced errors
    SAPup> Process with PID 10396 terminated with status 8 at 20150203102427!
    SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203110952
        ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
        ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
        ENV: SAPSYSTEMNAME=SCD
        ENV: dbms_type=mss
        ENV: dbs_mss_schema=scd
        PWD: D:\SUM\abap\tmp
    EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
    This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
    tp finished with return code: 0
    meaning:
      Everything OK
    SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203111013
        ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
        ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
        ENV: SAPSYSTEMNAME=SCD
        ENV: dbms_type=mss
        ENV: dbs_mss_schema=scd
        PWD: D:\SUM\abap\tmp
    EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
    This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
    tp finished with return code: 8
    meaning:
      A tool used by tp produced errors
    SAPup> Process with PID 8692 terminated with status 8 at 20150203111050!
    Can someone please help ?

    Hi Pankaj,
    did you get any solution for this issue ? I am also facing the same error in my BW upgrade to EHP3.
    Please share the solution if you get any.
    Regards,

  • EHP4 upgrade: Error in Phase ACT_UPG

    Hi All,
    While upgrading to EHP4 on ECC 6 system, we got error in phase MAIN_SHDRUN/ACT_UPG
    Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
    Last error code set: Unresolved requests in buffer RH4 Check logfiles 'ACTUPG.ELG' and '/sapdump/SAPehpi/EHPI/abap/log/SAPehpi.ECO'
    ACT_UPG log:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DMINISPSCA.RH4
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP111 exit code           : "12"
    Log of SAPA-604DMINISPSCA.RH4
    1 ETP155 ACTIVATION OF DD-OBJECTS
    1 ETP101 transport order     : "SAPK-604DMINISPSCA"
    1 ETP102 system              : "RH4"
    1 ETP108 tp path             : "/sapdump/SAPehpi/EHPI/abap/exe/tp"
    1 ETP109 version and release : "372.04.70" "700"
    1 ETP198
    3 EPU324 See log for request "/sapdump/SAPehpi/EHPI/abap/tmp/SAPAB70015.RH4" (timestamp "01:26:08", system "RH4")
    1AETR012XProgram terminated (job: "RDDMASGL", no.: "01260600")
    1AEPU320 See job log"RDDMASGL""01260600""RH4"
    1 ETP155 ACTIVATION OF DD-OBJECTS
    1 ETP110 end date and time   : "20091012033215"
    1 ETP111 exit code           : "12"
    1 ETP111 exit code           : "12"
    Job RDDMASG log :
    Job cancelled with following log
    2.10.2009 01:26:07 Job started                                                               00           516          S
    2.10.2009 01:26:07 Step 001 started (program RDDMASGL, variant IMPACTMRG, user ID DDIC)      00           550          S
    2.10.2009 01:26:08 Start of mass activation 01:26:08                                         AD           010          S
    when tried to log into shadow instance after getting error, it is giving error
    RH4: system message
    work process restarted; session terminated;
    we restarted shadow system. There is no dumps in the shadow system.
    Work process getting killed after 7800s
    checked in work directory of Shadow system:  devdisp log :_*
    Mon Oct 12 04:49:46 2009
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1694]
    ***LOG Q0K=> DpMsAttach, mscon ( HW136799) [dpxxdisp.c   12639]
    DpStartStopMsg: send start message (myname is >HW136799_RH4_22                         <)
    DpStartStopMsg: start msg sent
    Warning: Swap space is configured quite small with 20477 MB.
    It should be configured with at least 20 GB on 64 bit systems.
    See note 153641 for more information.
    Warning: tmpfs at /dev/shm is configured quite small with 1972 MB!
    Minimum value is 8192 MB.
    Recommended size is 75 % of RAM + swap.
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Mon Oct 12 04:49:47 2009
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 221
    Release check o.K.
    MBUF state ACTIVE
    DpModState: change server state from STARTING to ACTIVE
    Mon Oct 12 06:57:01 2009
    ERROR => DpWPCheck: W8 (pid 9769) died (severity=0, status=7) [dpxxdisp.c   15776]
    child (pid=9769) killed with signal 7
    Mon Oct 12 06:57:43 2009
    ERROR => DpWPCheck: W7 (pid 9768) died (severity=0, status=7) [dpxxdisp.c   15776]
    child (pid=9768) killed with signal 7
    Please let us know what needs to be cheked for the problem
    Thanks,
    Ramesh Ramagowni

    Hi Markas and All,
    Thanks for the information. /dev/shm was 100% full. now, the issue is solved after deleting its contents. and we have finished with EHP4 upgrade.
    After upgrade, SAP_AP component still showing as 700
    SAP_AP - 700 - 0015 - SAPKNA7015 -SAP Application Platform
    Can we delete old tablespace PSAPSR3700, it is showing as 0% used in brspace at present.
    Also while trying to move some datafiles using brtools after upgrade we are getting following error,
    BR0280I BRTOOLS time stamp: 2009-10-20 01.45.52
    BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
    c
    BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
    BR0257I Your reply: 'c'
    BR0259I Program execution will be continued...
    BR0252E Function fopen() failed for '/oracle/RH4/sapbackup/.user.pas' at location BrToolCall-2
    BR0253E errno 13: Permission denied
    BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
    BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
    BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
    There is no file in the directory '/oracle/RH4/sapbackup/.user.pas'
    Please suggest what needs to be for this issue..Do we need to upgrade BRTOOLS..
    Thanks,
    Ramesh R

  • Error with adautocfg.sh on the DB during final stage of upgrade

    Hi ;
    I have same issue like:
    Error with adautocfg.sh on the DB during final stage of upgrade
    i folled documents but somehow i cant recreate xml file
    i use this:
    cd <RDBMS ORACLE_HOME/appsutil/bin
    perl adbldxml.pl
    but nothing happen!! it doesnt do nothing!
    i rename my xml file under <RDBMS ORACLE_HOME/appsutil/ but there is no new xml file!!
    Is anyone know why?
    Thanks

    Hi hussein;
    Those note solved my problem, but i have one other problem now.. when i try to create new context file by usng :
    perl adbldxml.pl tier=db appsuser=apps appspasswd=apps jtop=/u01/VIS/visdb/10.2.0/jre/1.4.2
    i have this error:
    FOLLOWING ERROR OCCURED :
    +3 >= 3+
    StackTrace:
    java.lang.ArrayIndexOutOfBoundsException: 3 >= 3
    at java.util.Vector.setElementAt(Unknown Source)
    at oracle.apps.ad.context.GenerateContext.setJRETOP(GenerateContext.java:7483)
    at oracle.apps.ad.context.GenerateContext.InstantiateRestForDB(GenerateContext.java:3057)
    at oracle.apps.ad.context.GenerateContext.main(GenerateContext.java:8150)
    Upgrade to DB 10g fails with error - cannot generate contextfile
    i found note 369179.1, Note says i need to apply lastest autoconfig patch...
    When i donwload patch 6372396 which is lasest patch number for r11( i sourced r11 env file), and try to apply patch to my system its gives me that:
    AutoPatch error:
    adprdf(): At line 3 in file u6372396.drv:
    This patch is not compatible with your on-site release:
    patch's intended release version and
    on-site          release version
    do not have identical major and minor version numbers (first two components)
    patch's intended release is "11.5.0"
    on-site          release is "12.0.4"
    Processing line   10000.
    Processing line   20000.
    +24658 lines processed.+
    AutoPatch error:
    AutoPatch encountered errors parsing and loading the patch driver file.
    +STRT_TASK: [Prereq checking logic] [] [Sun Jun 28 2009 09:04:57]+
    So i decide to apply autoconfig patch 7237313 for r12, so i source r12 env file and then start path end its ended wihtout error
    After i try to create context file by using this command again:
    perl adbldxml.pl tier=db appsuser=apps appspasswd=apps jtop=/u01/VIS/visdb/10.2.0/jre/1.4.2
    and have still same error :(
    FOLLOWING ERROR OCCURED :
    3 >= 3
    StackTrace:
    java.lang.ArrayIndexOutOfBoundsException: 3 >= 3
    at java.util.Vector.setElementAt(Unknown Source)
    at oracle.apps.ad.context.GenerateContext.setJRETOP(GenerateContext.java:7483)
    at oracle.apps.ad.context.GenerateContext.InstantiateRestForDB(GenerateContext.java:3057)
    at oracle.apps.ad.context.GenerateContext.main(GenerateContext.java:8150)
    so now what i have to do?
    thanks for advice

  • Error encountered in phase SHDINST_DB_PREP - EHP1 upgrade using EHPI.

    Hi Experts,
    I am currently in the configuration phase of Enterprise Portal upgrade from 700 to EHP1 then i got this error in phase SHDNST_DB_PREP, I am using OS platform Windows Server 2003; here is the message:
    On the EHPi GUI:
    Decide how you want to continue
    Checks after phase PREP_INSTALL/SHDINST_DB_PREP were negative!
    Last error code set: Process 'brconnect' exited with 5, see 'D:\EHPI\abap\log\SHDUSRCRE.LOG' for detai
    Trouble Ticket Generation
    A trouble ticket and an archive with all relevant log files have been generated. Trouble ticket: "D:\EHPI\abap\log\SAPehpi_troubleticket.log" Log archive: "D:\EHPI\abap\log\SAPehpi_troubleticket_logs.sar"
    Choose Action:
    Repeat phase SHDNST_DB_PREP to continue at the point it stopped.
    Restart the current module from the beginning
    Exit this program
    for SHDUSRCRE.LOG:
    SAPehpi> Starting subprocess brconnect with id 13588 at 20100816143027
    Environment: CLASSPATH=C:\oracle\CUSDEV01\102\jdbc\lib\ojdbc14.jar;
    Environment: JAVA_HOME=C:\j2sdk1.4.2_13-x64
    Environment: NLS_LANG=AMERICAN_AMERICA.UTF8
    Environment: ORACLE_HOME=C:\oracle\EP1\102
    Environment: ORACLE_SID=EP1
    Environment: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    Environment: Path=E:\oracle\CUSPRD01\102\bin;C:\oracle\CUSDEV01\102\bin;C:\oracle\EP1\102\BIN;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Dell\SysMgt\oma\bin;C:\usr\sap\EP1\SYS\exe\uc\NTAMD64;C:\Program Files (x86)\Dell\SysMgt\oma\bin
    Environment: auth_shadow_upgrade=0
    Environment: dbms_type=ora
    Environment: dbs_ora_schema=SAPEP1
    Environment: dbs_ora_tnsname=EP1
    BR0801I BRCONNECT 7.00 (42)
    BR0280I BRCONNECT time stamp: 2010-08-16 14.30.28
    BR0301E SQL error -28003 at location crown_main-1, SQL statement:
    '/* BRCONNECT */ CREATE USER "SAPEP1SHD" IDENTIFIED BY "kXZvHmKI.42aB"'
    ORA-28003: password verification for the specified password failed
    ORA-20003: Password should contain at least one \
                  digit, one character and one punctuation
    BR1336I Creating database owner SAPEP1SHD failed
    BR0280I BRCONNECT time stamp: 2010-08-16 14.30.28
    BR0804I BRCONNECT terminated with errors
    Process with ID 15076 terminated with status 5
    Did you encounter this error? How can i solve it?
    Thanks a lot!
    Regards,
    Tony

    Hello Experts,
    I already solved the issue, just creating the user manually at command promp,
    the problem is that the password that SAP generated was not compatible or not acceptble to the system that is why i manually created the user:
    SQL> CREATE USER SAPEP1SHD IDENTIFIED BY kXZvHmKI_42aB;   - > correct one
    SQL> CREATE USER SAPEP1SHD IDENTIFIED BY kXZvHmKI.42aB;    - > incorrect; generated by the system
    Thanks & Regards,
    Tony

Maybe you are looking for

  • Home from College

    For college, I bought a new imac G5. My parents followed suit and replaced their old mac. At my dorm, I was obviously hooked up to the internet through the school, however, I am now home and i do not have the internet on my computer. My parent's comp

  • How to processing the results from the select statement in SQL query?

    Hi This might be too simple, but my knowledge of the SQL is very limited... I have table where I do have details from calls (Lync QoE). I can take all calls from the table, but I would like to count the concurrent calls on the table. This is how I go

  • How to integrate a Java Application in the portal

    Hi: I have developed a pure and simple Java Application just like a test, only Java, no EJB, no JSP. JUST PURE JAVA. I need to put this application in my Oracle9iAS Portal and i've found something about developing EAR and WAR. But i can't find the wa

  • Straight to Sleep Mode when powering On

    Once Verizon service has been activated, when the iPhone 5s is turned on (from being off and not from being asleep), it bypasses the home screen with the slide bar and goes directly to sleep mode.  The home screen with slide bar appears briefly, but

  • Installation Premiere Pro CC

    Download the trial version stops (41%), what to do please help