Error in phase XPRAS_AIMMRG for Upgrade from 4.7 to ERP6 ehp5 sps5

Hi All,
We are in process in upgrading our sandbox system from 4.7 to ERP6.0
EHP5 SPS5.
During the downtime step we are facing an error in phase XPRAS_AIMMRG
Upon investigation we found that there are short dumps in the system
due to this error.
Below is the extract of the short dumps generated by the job RDDEXECL
Category Internal Kernel Error
Runtime Errors DDIC_TYPE_INCONSISTENCY
Application Component BC-ABA-LA
Date and Time 05.12.2011 08:58:48
Short text
Inconsistency in the dictionary for the structure "KOMG".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLF82V" program had to be terminated because
the
ABAP processor detected an internal system error.
Also, We I try to check the Table KOMG in SE11 is get the below messages.
Check table KOMG (DDIC/05.12.11/10:00)
Append structure OILKOMG appended to table KOMG
Append structure OIUKOMG appended to table KOMG
No customer or SAP include SI_KOMK_CM exists
No customer or SAP include SI_KOMP_CM exists
No customer or SAP include CI_PRS_CPILS_2 exists
Enhancement category 3 possible, but include or subty. not
yet classified
Field LGORT in table KOMG is specified twice. Please check
KOMG-ZZMVGR4: Table TVM1T in search help attachment differs
from table of search field
Check on table KOMG resulted in errors
Has anyone received the below message in XPRAS phase during the upggrade.
Any suggestion would be most welcome.
Regards,
Nilesh Jagtap

Dear Nilesh,
The reason for this issue is that the component 'LGORT' is indeed specified twice in structure KOMG on your system.
It might be definied in the standard include as well as in your customer include.
Please bear in mind, that if you append customer own structures to SAP standad structures, that the component names should start with 'Z' or even better 'ZZ'.
That prevents the case which might have happened here, that the field you have added on customer side has also been delivered as part of an SAP standard include.
So you should change your structure accordingly.
Note 531835 describes how to add an own field to such structures. It might also be helpful for you.
After you have repaired your structure you can activate the structure KOMG and the issue should be solved.
Best Regards,
Abhishek

Similar Messages

  • Error in Phase START_SHDI_FIRST for Upgrade to ERP6 SR3

    Hi Folks
    We are performing a test upgrade 46C to ERP6 using the SR3 CDs and I'm stuck at the START_SHDI_FIRST stage.
    It's not the "usual" .acl problem.
    Here is an excerpt from the SAPup joblog. I also get the same result if I logon as <SID>OFR add the 700 Kernel and use STARTSAP.
    Calling STRRMTDB...                                                     
    Environment variable does not exist.                                    
    Environment variable added.                                             
    Job 029650/P01OFR/STRRMTDB submitted to job queue QBATCH in library QGPL.
    Environment variable removed.                                           
    Ownership of object GETOBJINF in QTEMP type *USRSPC changed.            
    Start profile is "/usr/sap/put/P01/SYS/profile/START_DVEBMGS38_tegerppd".
    Executable directory is "/usr/sap/put/exe".                             
    Checking Kernel...                                                      
    Ownership of object GETOBJINF in QTEMP type *USRSPC changed.            
    StartInstance: Program STRSBSJOB does not exist (ILE).                  
    O4STRSAP: Starting instance 38 of system P01 on host tegerppd failed.   
    Errors occurred in command.                                             
    Errors occurred in command.  
    STRSBSJOB does exist in the Kernel library and appears in /usr/sap/put/exe as a link.
    Not sure where to go from here.
    Any suggestions?
    Thanks
    Steve

    Hi Steven,
    I think, you are trying something forbidden here ;-((
    You are in the uptime and try to use STARTSAP for the new kernel, which is not ok.
    The correct way to start the shadow is as follows:
    - logon with sidofr
    - addlible sapup
    - check, that the shadow instance is totally down - otherwise kill all processes there
      (you could use (try) the following instead as well:
       SAPUP UPGDIR('/usr/sap/put') PARMLIST('stopshd')     )
    - SAPUP UPGDIR('/usr/sap/put') PARMLIST('startshd')
    Then it is interesting to see the errors ....
    btw:
    the well-known error is really not there ?
    edtf '/usr/sap/put/X85/SYS/global/ms_acl_info'
    HOST = *      <<< correct
    Then, I do have the next idea as the new second in future "well-known-error":
    The locales in the OS will miss for DE and/or US ;-((
    In the old kernel, this was no issue, but now, SAP changed its mind and doesn't deliver them as fallback any more ;-(
    (note 1077496 tries to explain this change, but I was not able by now to understand this note or to see that it really works like this - especially as I never have the chance to install complete further languages just for this !!!)
    My check is always:
    Please check with CALL QP2TERM: (NOT QSH!)
    cd /usr/lib/nls/loc
    ls en*
    ls de*
    (normally in this directory there are links only, but you can place true
    locales here as well)
    You need at least the following ones:
    en_US.ISO8859-1
    en_US.ISO8859-1__64
    de_DE.ISO8859-1     
    de_DE.ISO8859-1__64
    => I do have all needed locales for download and place them (a bit illegal) into /usr/lib/nls/loc - if you are interested in this, let me know.
    Regards
    Volker Gueldenpfennig, consolut international ag
    http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

  • Requirements for upgradation from 4.7 to ECC 6.0

    Hi Guru's,
                      Can anybody explain what are the steps required for upgradation from 4.7 to ECC 6.0, technically and functionally. If any body have documents regarding the same, please share.Full marks will be awarded.thanx in advance....

    Hi
    You have to aware of all related program like BDC's , Screens related errors and all dictionary related problems.
    Some function modules may become obsolete, and some screens will change
    abnd some new fields will be added in the new versions etc.
    Also take care of SPAU and SPDD tcodes.
    You should be able to know about Unicode concept in sap.
    chk this
    http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
    also chk these 2 notes in service.sap.com
    Technical Upgrade is only a version upgrade without any functionality changes.
    The objects that are needed to be upgraded are:
    Includes
    Function Groups / Function Modules
    Programs / Reports
    OSS Notes
    SAP Repository Objects
    SAP Data Dictionary Objects
    Domains, Data Elements
    Tables, Structures and Views
    Module Pools, Sub Routine pools
    BDC Programs
    Print Programs
    SAP Scripts, Screens
    User Exits
    You can refer to the below links for more information on technical upgrade:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
    https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
    http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66647d9011d396b60000e82de14a/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
    Reward points if useful
    Regards
    Anji

  • OSS notes relevant for FI/CO for upgrade from 4.7 to ECC 6.0

    Hello,
    I need the list of the applicable OSS notes relevant for the FI/CO module for upgrade from 4.7 to ECC 6.0
    Thanks
    Sid

    Hi,
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, QM.....
    Click on Search
    Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
    and also check the release notes of ECC 6.0 in service.sap.com.
    Hope this helps you.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money  for that

    Hi All
         Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money to SAP for that.

    hi,
    asking or teling ?
    I think you need not as long as you are with official support . However please contact sap official support in you region

  • Features and Functionalities of ECC 6.0 for upgrade from 4.7 to ECC 6.0

    Hi All,
    Can you let me know the features and functionalities of ECC 6.0 as we are planning to go for upgrade from 4.7 to ECC 6.0...
    Cheers
    Prasanna

    And you can see the PAM for your architecture.....
    Do you want to use the JAVA instance?
    Change from no-unicode to unicode?
    Do you have MDMP?
    Regards,
    Alfredo.

  • What is the sequence for upgrading from 10.4.11 to lion

    What is the sequence for upgrading from 10.4.11 to lion. Can't use many apps without it. HELP

    Quicken is an example that the OP noted is important to her, too!
    Intuit makes it very difficult to find this link?!
    Everytime I want to find it to post it for someone else, I have to Google: "cnet quicken 2007 for lion" and then in top listed link: Topper Kessler's review for CNET, I find the direct link to Intuit
    This program will work with Quicken 2005, 2006 and 2007 data files directly.  If you have a data file from an older version, such as I did, Quicken Deluxe 2002, you must use the PPC version of either Quicken 2006 or 2007 to update the data first; and then the data will work in Quicken 2007 for Lion.
    For other PPC programs that require Rosetta, I installed Snow Leopard (with Rosetta) into Parallels 7 in Lion:
                             [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439

  • Will I be charged for upgrade from OSX 10.7.4 version to 10.7.6 version?

    Will I be charged for upgrade from OSX 10.7.4 version to 10.7.6 version?
    When I check for the software upgrade on my Mac-book Air, it is showing that the above upgrade is available. Will it be charged? I am not asked the ‘ Apple ID’ before start of up gradation process , does that mean that such upgrades are free?
    If yes, How much are the chargers for such upgrades?
    Thanks for your inputs.

    10.7.6 does not exist.
    The next one will be Mountain Lion 10.8 and will cost a little amount.
    The Mountain Lion is not an "update", but an "upgrade": a different OS: before installing you should check the compatibilty of your hardware and software.

  • Error in phase START_SHDI_FIRST during upgrade to ECC6

    Hi Expert,
    When I upgrade from R3 46C to ECC6NU on Windows server 2003 64bits with SQL SERVER 2005 64bits, in phase START_SHDI_FIRST, it is failed.
    Here is the log:
    trc file: "dev_w21", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Tue Apr 08 17:18:28 2008
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
    B  Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
    B  Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
    B  New connection 0 created
    M sysno      01
    M sid        BXT
    M systemid   562 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    80
    M intno      20050900
    M make:      multithreaded, ASCII, 64 bit, optimized
    M pid        2516
    M
    M  kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
    M  length of sys_adm_ext is 360 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc21 2516) [dpxxdisp.c   1301]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          20608     (896)
    M  DpShMCreate: sizeof(tm_adm)          4663200     (23200)
    M  DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
    M  DpShMCreate: sizeof(comm_adm)          552064     (1088)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1496)
    M  DpShMCreate: sizeof(wall_adm)          (25648/36736/64/104)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010610050, size: 5329360)
    M  DpShMCreate: allocated sys_adm at 0000000010610050
    M  DpShMCreate: allocated wp_adm at 0000000010611AB0
    M  DpShMCreate: allocated tm_adm_list at 0000000010616B30
    M  DpShMCreate: allocated tm_adm at 0000000010616B90
    M  DpShMCreate: allocated wp_ca_adm at 0000000010A89330
    M  DpShMCreate: allocated appc_ca_adm at 0000000010A8D980
    M  DpShMCreate: allocated comm_adm at 0000000010A8F0F0
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 0000000010B15D70
    M  DpShMCreate: allocated gw_adm at 0000000010B15DF0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 0000000010B15E20
    M  DpShMCreate: allocated wall_adm at 0000000010B15E30
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 21 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Tue Apr 08 17:18:29 2008
    M  ThInit: running on host shsapsrv05
    M  calling db_connect ...
    C  Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
    C  Thread ID:404
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      72
    C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
    C  np:(local) connection used on SHSAPSRV05
    C  CopyLocalParameters: dbuser is 'dbo_shd'
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  Provider Release:9.00.3042.00
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  Cache sizes: header 88 bytes, 20000 names (28000000 bytes), 500 dynamic statements (2752000 bytes), total 30752088 bytes
    C  Using shared procedure name cache SHSAPSRV05_BXT_BXT_SHD_MEM initialized by another process.
    C  Connected to db server : [SHSAPSRV05] server_used : [np:(local)], dbname: BXT, dbuser: dbo
    C  pn_id:SHSAPSRV05_BXT_BXT_SHD
    C  Using MARS (on sql 9.0)
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20080408 171829 SHSAPSRV05     
    C  Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
    C  The IRow interface is supported by this OLEDB provider
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I 
    I Tue Apr 08 17:18:32 2008
    I  MtxInit: 21 0 0
    M  SHM_PRES_BUF               (addr: 0000000017540050, size: 4400000)
    M  SHM_ROLL_AREA          (addr: 000007FFF3410050, size: 59801600)
    M  SHM_PAGING_AREA          (addr: 0000000017980050, size: 32112640)
    M  SHM_ROLL_ADM               (addr: 0000000019830050, size: 598700)
    M  SHM_PAGING_ADM          (addr: 00000000198D0050, size: 525344)
    M  ThCreateNoBuffer          allocated 324144 bytes for 1000 entries at 0000000019960050
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 7440 bytes (50 server) at 00000000199B0050
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 21 initializing ....
    X  Using implementation flat
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 21, WP_CNT = 23, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 000000001E830160, size: 30000000, end: 00000000204CC4E0)
    B  dbtbxbuf: Buffer TABLP (addr: 00000000204D0160, size: 10240000, end: 0000000020E94160)
    B  dbexpbuf: Buffer EIBUF (addr: 0000000020EB0170, size: 4194304, end: 00000000212B0170)
    B  dbexpbuf: Buffer ESM   (addr: 00000000212C0170, size: 4194304, end: 00000000216C0170)
    B  dbexpbuf: Buffer CUA   (addr: 00000000216D0170, size: 3072000, end: 00000000219BE170)
    B  dbexpbuf: Buffer OTR   (addr: 00000000219C0170, size: 4194304, end: 0000000021DC0170)
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 0000000012DFAFB0
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  2 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 0000000029DA00C0
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 0000000029DA06E0
    S    using messages for server info
    S  size of spec char cache entry: 165024 bytes (timeout 100 sec)
    S  size of open spool request entry: 1184 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  System page size: 4kb, total admin_size: 5744kb, dir_size: 5656kb.
    A  Attached to PXA (address 000007FFF6D20050, size 150000K)
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A  ABAP ShmAdm attached (addr=000007FF4FE7E000 leng=20955136 end=000007FF5127A000)
    A  >> Shm MMADM area (addr=000007FF5024A2E0 leng=261120 end=000007FF50289EE0)
    A  >> Shm MMDAT area (addr=000007FF5028A000 leng=16711680 end=000007FF5127A000)
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 1
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    M  ThrCreateShObjects          allocated 23982 bytes at 0000000029EC0050
    N  SsfSapSecin: putenv(SECUDIR=D:\usr\sap\put\BXT\DVEBMGS01\sec): ok
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is D:\usr\sap\put\exe\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...sucessfully completed.
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITSP ICMAN is not active: Disable Kernel Web GUI functionality
    W  === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
    W  =================================================
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    A  *** ERROR => TEXTENV_INVALID environment: [ablocale.c   205]
    A  *** ERROR => Locale=`unsupported' Lang=`E' [ablocale.c   211]
    A  *** ERROR => Country=`0AU' CodePage=`6200'. [ablocale.c   217]
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13168]
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A 
    A Tue Apr 08 17:18:33 2008
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Tue Apr 08 17:18:33 2008
    A 
    A  ABAP Program ????????????????????????????????????????.
    A  Source                                          Line 0.
    A  Error Code TEXTENV_INVALID.
    A  Module  $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
    A  Function DoSetTextEnv Line 225.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end no http/smtp
    A  ** RABAX: end RX_GOTO_SAPDEXT
    A  Error when generating text environment..
    A 
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13168]
    S  *** ERROR => sap_dext: Spoolworkprocess aborted! [rspodynp.c   113]
    S  T100-key: SY   , type '65'
    S  variable 0: Error when generating text environment.
    S  Exitcode 4
    S  *** ERROR => restarting work process (spool will not work after sap_dext [rspodynp.c   135]
    M  ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c   15883]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThWpHalt: halt wp (step 4, th_errno 5, action 2, level 1) [thxxhead.c   10169]
    M 
    M  Info for wp 21
    M 
    M    stat = 4
    M    reqtype = 5
    M    act_reqtype = 5
    M    rq_info = 8576
    M    tid = 21
    M    mode = 0
    M    len = 2040
    M    rq_id = 14
    M    rq_source = 1
    M    last_tid = 21
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = no VM
    M 
    M  Modeinfo for User T21/M0
    M 
    M    tm state = 2
    M    uid = 22
    M    term type = 0x2
    M    display = 0x0
    M    cpic_no = 0
    M    cpic_idx = -1
    M    usr = >SAPSYS      <
    M    terminal = >                    <
    M    client = >000<
    M    conversation_ID = >        <
    M    appc_tm_conv_idx = -1
    M    session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
    M    ext_session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
    M    imode = 0
    M    mode state = 0x42
    M    mode clean_state = 1
    M    task_type = ZTTASPO
    M    lastThFc = THFCSPO
    M    lastAction = TH_IACT_NO_ACTION
    M    th_errno = 5
    M    rollout_reason = 0
    M    last_rollout_level = 0
    M    async_receives = 0
    M    cpic_receive = 0
    M    em handle = 0
    M    roll state = 2
    M    abap state = 2
    M    em state = 3
    M    eg state = 1
    M    spa state = 3
    M    enq state = 0
    M    next hook = T-1/U-1/M255
    M    master hook = T-1/U-1/M255
    M    slave hook = T-1/U-1/M255
    M    debug_tid = 255
    M    debug_mode = 0
    M    mode type = 0x1
    M    debug = 0
    M    tcode = >                    <
    M    client conversation_ID = >        <
    M    server conversation_ID = >        <
    M    lock = 0
    M    max enq infos = 0
    M    act enq infos = 0
    M    em_hyper_hdl = 000007FF51285070
    M    plugin_info = NULL
    M    act_plugin_hdl = -1
    M    act_plugin_no  = 0
    M    max_plugin_no  = 0
    M    async_receives = 0
    M    vm = no VM
    M 
    M  Adresse   Offset  Data from input buffer
    M  -
    M  0000000010EE2C00  000000  00000000 02000000 4a000000 00000000 |........J.......|
    M  0000000010EE2C10  000016  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2C20  000032  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2C30  000048  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2C40  000064  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2C50  000080  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2C60  000096  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2C70  000112  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2C80  000128  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2C90  000144  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2CA0  000160  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2CB0  000176  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2CC0  000192  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2CD0  000208  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2CE0  000224  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2CF0  000240  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2D00  000256  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2D10  000272  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2D20  000288  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2D30  000304  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2D40  000320  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2D50  000336  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2D60  000352  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2D70  000368  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2D80  000384  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2D90  000400  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2DA0  000416  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2DB0  000432  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2DC0  000448  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2DD0  000464  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2DE0  000480  00000000 00000000 00000000 00000000 |................|
    M  0000000010EE2DF0  000496  00000000 00000000 00000000 00000000 |................|
    M  -
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  ThrSaveSPAFields: save spa fields
    M  Entering ThSetStatError
    M  ThIErrHandle: incomplete previous roll out, do a full roll out
    M  ThRollOut: roll out T21/U22/M0/I0 (level=7, short_roll_out=0)
    M  ThRollOut: call rrol_out (1)
    M  ThRollOut: act roll state = DP_ROLLED_OUT
    M  ThRollOut: roll level <> 0, don't call ab_rollout
    M  ThRollOut: full roll out of U22 M0 I0 (Level 7) ok
    C  SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 1
    M  ThIErrHandle: don't try rollback again
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=1)
    M  ThIErrHandle: Entering ThReplyToMsg
    M  ThIErrHandle: Entering ThErrHdlUser
    M  ThErrHdlUser: set th_errno (5)
    M  ThErrHdlUser: save context
    M  ThEmContextDetach2: detach T21/M0 from em memory (em_hdl=0, force=0)
    M  ThEmContextDetach2: reset local em info
    M  call ThrShutDown ...
    B  Disconnecting from ALL connections:
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  021 000 R/3              000000000 INACTIVE     NO  YES NO  000 255 255 20080408 171829 SHSAPSRV05     
    B  Disconnected from connection 0
    B  statistics db_con_commit (com_total=6, com_tx=1)
    B  statistics db_con_rollback (roll_total=2, roll_tx=1)
    M  ***LOG Q02=> wp_halt, WPStop (Workproc21 2516) [dpnttool.c   327]
    trc file: "dev_w21", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Tue Apr 08 17:19:07 2008
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
    B  Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
    B  Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
    B  New connection 0 created
    M sysno      01
    M sid        BXT
    M systemid   562 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    80
    M intno      20050900
    M make:      multithreaded, ASCII, 64 bit, optimized
    M pid        832
    M
    M  kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
    M  length of sys_adm_ext is 360 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc21 832) [dpxxdisp.c   1301]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          20608     (896)
    M  DpShMCreate: sizeof(tm_adm)          4663200     (23200)
    M  DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
    M  DpShMCreate: sizeof(comm_adm)          552064     (1088)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1496)
    M  DpShMCreate: sizeof(wall_adm)          (25648/36736/64/104)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010610050, size: 5329360)
    M  DpShMCreate: allocated sys_adm at 0000000010610050
    M  DpShMCreate: allocated wp_adm at 0000000010611AB0
    M  DpShMCreate: allocated tm_adm_list at 0000000010616B30
    M  DpShMCreate: allocated tm_adm at 0000000010616B90
    M  DpShMCreate: allocated wp_ca_adm at 0000000010A89330
    M  DpShMCreate: allocated appc_ca_adm at 0000000010A8D980
    M  DpShMCreate: allocated comm_adm at 0000000010A8F0F0
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 0000000010B15D70
    M  DpShMCreate: allocated gw_adm at 0000000010B15DF0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 0000000010B15E20
    M  DpShMCreate: allocated wall_adm at 0000000010B15E30
    X 
    X Tue Apr 08 17:19:08 2008
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 21 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host shsapsrv05
    M  calling db_connect ...
    C  Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
    C  Thread ID:3980
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      72
    C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
    C  np:(local) connection used on SHSAPSRV05
    C  CopyLocalParameters: dbuser is 'dbo_shd'
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  Provider Release:9.00.3042.00
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  Cache sizes: header 88 bytes, 20000 names (28000000 bytes), 500 dynamic statements (2752000 bytes), total 30752088 bytes
    C  Using shared procedure name cache SHSAPSRV05_BXT_BXT_SHD_MEM initialized by another process.
    C  Connected to db server : [SHSAPSRV05] server_used : [np:(local)], dbname: BXT, dbuser: dbo
    C  pn_id:SHSAPSRV05_BXT_BXT_SHD
    C  Using MARS (on sql 9.0)
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20080408 171908 SHSAPSRV05     
    C  Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
    C  The IRow interface is supported by this OLEDB provider
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I  MtxInit: 21 0 0
    M  SHM_PRES_BUF               (addr: 0000000017540050, size: 4400000)
    M  SHM_ROLL_AREA          (addr: 000007FFF3410050, size: 59801600)
    M  SHM_PAGING_AREA          (addr: 0000000017980050, size: 32112640)
    M  SHM_ROLL_ADM               (addr: 0000000019830050, size: 598700)
    M  SHM_PAGING_ADM          (addr: 00000000198D0050, size: 525344)
    M  ThCreateNoBuffer          allocated 324144 bytes for 1000 entries at 0000000019960050
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 7440 bytes (50 server) at 00000000199B0050
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 21 initializing ....
    X  Using implementation flat
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 21, WP_CNT = 23, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 000000001E830160, size: 30000000, end: 00000000204CC4E0)
    B  dbtbxbuf: Buffer TABLP (addr: 00000000204D0160, size: 10240000, end: 0000000020E94160)
    B  dbexpbuf: Buffer EIBUF (addr: 0000000020EB0170, size: 4194304, end: 00000000212B0170)
    B  dbexpbuf: Buffer ESM   (addr: 00000000212C0170, size: 4194304, end: 00000000216C0170)
    B  dbexpbuf: Buffer CUA   (addr: 00000000216D0170, size: 3072000, end: 00000000219BE170)
    B  dbexpbuf: Buffer OTR   (addr: 00000000219C0170, size: 4194304, end: 0000000021DC0170)
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 0000000012DFAFB0
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  2 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 0000000029DA00C0
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 0000000029DA06E0
    S    using messages for server info
    S  size of spec char cache entry: 165024 bytes (timeout 100 sec)
    S  size of open spool request entry: 1184 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  System page size: 4kb, total admin_size: 5744kb, dir_size: 5656kb.
    A  Attached to PXA (address 000007FFF6D20050, size 150000K)
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A  ABAP ShmAdm attached (addr=000007FF4FE7E000 leng=20955136 end=000007FF5127A000)
    A  >> Shm MMADM area (addr=000007FF5024A2E0 leng=261120 end=000007FF50289EE0)
    A  >> Shm MMDAT area (addr=000007FF5028A000 leng=16711680 end=000007FF5127A000)
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 1
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    M  ThrCreateShObjects          allocated 23982 bytes at 0000000029EC0050
    N  SsfSapSecin: putenv(SECUDIR=D:\usr\sap\put\BXT\DVEBMGS01\sec): ok
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is D:\usr\sap\put\exe\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...sucessfully completed.
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITSP ICMAN is not active: Disable Kernel Web GUI functionality
    W  === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
    W  =================================================
    E  Replication is disabled
    E  EnqCcInitialize: local lock table initialization o.k.
    E 
    E Tue Apr 08 17:19:09 2008
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    M  ThCheckPrevUser: clean previous user T21/U22/M0/I0/V-1
    M 
    M  Modeinfo for User T21/M0
    M 
    M    tm state = 2
    M    uid = 22
    M    term type = 0x2
    M    display = 0x0
    M    cpic_no = 0
    M    cpic_idx = -1
    M    usr = >SAPSYS      <
    M    terminal = >                    <
    M    client = >000<
    M    conversation_ID = >        <
    M    appc_tm_conv_idx = -1
    M    session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
    M    ext_session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
    M    imode = 0
    M    mode state = 0x42
    M    mode clean_state = 1
    M    task_type = ZTTASPO
    M    lastThFc = THFCSPO
    M    lastAction = TH_IACT_NO_ACTION
    M    th_errno = 5
    M    rollout_reason = 0
    M    last_rollout_level = 7
    M    async_receives = 0
    M    cpic_receive = 0
    M    em handle = 0
    M    roll state = 3
    M    abap state = 3
    M    em state = 2
    M    eg state = 1
    M    spa state = 3
    M    enq state = 0
    M    next hook = T-1/U-1/M255
    M    master hook = T-1/U-1/M255
    M    slave hook = T-1/U-1/M255
    M    debug_tid = 255
    M    debug_mode = 0
    M    mode type = 0x1
    M    debug = 0
    M    tcode = >                    <
    M    client conversation_ID = >        <
    M    server conversation_ID = >        <
    M    lock = 0
    M    max enq infos = 0
    M    act enq infos = 0
    M    em_hyper_hdl = 000007FF51285070
    M    plugin_info = NULL
    M    act_plugin_hdl = -1
    M    act_plugin_no  = 0
    M    max_plugin_no  = 0
    M    async_receives = 0
    M    vm = no VM
    M 
    M  ThCheckPrevUser: reset spa state for user T21/U22/M0
    M  LOCK WP ca_blk 276
    M  LOCK APPC ca_blk 92
    M  set task type ZTTASPO
    M  ThCleanPrevUser: clean U22 T21 M0 I0 V-1 from previous wp
    M  ThCleanPrevUser: saved MODE_REC = 40
    M  PfStatDisconnect: disconnect statistics
    M  ThRollIn: roll in T21/U22/M0/I0 (level=7, abap_level=1, attach_em=1)
    M  ThCheckEmState: check ATTACH for em hdl 0
    M  ThCheckEmState: call EmContextAttach (em_hdl=0)
    M  ThRollIn: U22 M0 I0 (Level 7) ok
    M  ThRollIn: roll in abap store
    M  ThIAMDel: delete tid/mode 21/0 (th_errno 23, release 1)
    M  ThTSCancel: set T21/M0 in status MODE_CANCEL
    M  ThIDeleteMode (21, 0, 3, ><, 0, 255, TRUE)
    M  ThIDeleteMode: no modes found ..
    M    no sub modes
    M  ThSUsrDel: delete system user
    M  RstrNotifyUserChange: user/client = (SAPSYS      /000)
    M  ThResFree: free resources of U22 M0 I0 (normal mode, complete free) at level 3, errno=23, db_action=TH_DB_NO_ACTION, pooling=1
    M  ThResFree: reset spa state for user T21/U22/M0
    M  ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
    M  ThCallHooks: call hook >abRtmClearSession< for event BEFORE_SESSION_CANCEL
    M  ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
    M  PfStatDisconnect: disconnect statistics
    M  ThDealComm: T21/U22/M0 has no cpic conns
    M  clean up all internal modes of T21/U22/M0
    M  call ab_endmode (END_MODE_CLEAR_ALL)
    M  RstrNotifyUserChange: user/client = (SAPSYS      /000)
    M  ***LOG R47=> ThResFree, delete (001023) [thxxmode.c   1357]
    M  ThVmcCleanMode (deleteOfMainMode=1, AoS=0)
    M  ThSesGetSessionType: no associated entry
    M  ThSesIsJavaSessionId: no associated entry
    M  ThVmcCleanMode o.k.
    M  ThGetEnqInfo: no enq info found
    M  ThVBIRollBack: initialize TH-hooks
    M  SosRegisterHook: add hook >ThVBICmRbHook(00000000005BE2C0)< for event AFTER_COMMIT
    M  SosRegisterHook: add hook >ThVBICmRbHook(00000000005BE2C0)< for event AFTER_ROLLBACK
    M  ThRmLocQueue: no async request found
    M  ThPageFree: free (22,0,0, mode = 3)
    M  ThRollFree: free (22,0,0, mode = 3)
    M  ThRmFree:  cleanup resources for T21 M0
    M  RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 000000001068DEC8/0000000000000000/0/1/0
    M  RmCleanUpResources3: no resources registered
    M  ThRmFree: reset eg state of T21 M0
    M  ThRmFree cleanup resources for T21
    M  RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 0000000010693420/0000000000000000/1/1/0
    M  RmCleanUpResources3: no resources registered
    M  ThRmFree: reset eg state of T21
    M  ThIEmFree: delete hyper context (hyperHdl=000007FF51285070)
    M  ThIEmFree: call EmContextDelete (em_hdl=0)
    M  ThResFree: save spa pointer 000007FFF3135B20 and install dummy spa
    M  ThCheckComOrRb (event=1, full_commit=0)
    M  ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
    M  ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
    M  ThCheckComOrRb (event=3, full_commit=0)
    M  ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
    M  ThVBICmRbHook: called for commit
    M  ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
    M  ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
    M  ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
    M  ThNoClearPrevErr: clear prev no err
    M  ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
    M  ThISend: (tm/type/info = 21/0x41/0x0, mode_deleted=1)
    M  abap strategy ROLL / O.K.
    M  ThRqOutCheck: o.k.
    M  ThNewWpStat (type=0x41, task_switch=1, inline_hold=0, hand_shake=0, debug=0, ..)
    M  ThNewWpStat: new MODE_REC = 0x40
    M  ThNewWpStat: set mode wait
    M  ThNewWpStat: new state of T21/M0 = 0x49
    M  ThISend: new wp stat: 0x2
    M  rdisp/wp_auto_restart = 0 sec
    M  rdisp/wp_abap_restart = 0
    M  ThSetThToolParam : restartable_wp[0] = FALSE
    M  ThSetThToolParam : restartable_wp[1] = TRUE
    M  ThSetThToolParam : restartable_wp[2] = TRUE
    M  ThSetThToolParam : restartable_wp[3] = FALSE
    M  ThSetThToolParam : restartable_wp[4] = TRUE
    M  ThSetThToolParam : restartable_wp[5] = TRUE
    M  ThSetThToolParam : restartable_wp[6] = TRUE
    M  ThMkReq: send output to canceled mode
    M  ThDtWpBlk: detach WP ca_blk 276
    M  ThISend: complete stat record
    M  ThISend: stat_state = TH_STAT_WRITE
    M  ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQ
    M  make DISP owner of wp_ca_blk 276
    M  DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 49)
    M  -OUT- sender_id WORK_PROCESS      tid  21    wp_ca_blk   276     wp_id 21
    M  -OUT- action    SEND_TO_DP        uid  22    appc_ca_blk -1      type  NOWP
    M  -OUT- new_stat  WP_WAIT           mode 0     len         8       rq_id 49
    M  -OUT- req_info  CANCELMODE
    M  REL APPC ca_blk 92
    M  ThDtAppcBlk: detach APPC ca_blk 92
    M  PfClearAllRec: clear statistic area
    M  PfStatDisconnect: disconnect statistics
    M  ThISend: set inPrivMode = 0 for T21/M0
    M  ThSysUsrCheck (1,1): check system user T21/U22/M0
    M  ThIEmFree: em state of T21/M0 (em_hdl=-1) is DP_EM_NO_CONTEXT
    M  ThSysUsrCheck: clear T21
    M  DpITmSlotClear: clear slot 21
    M  DpListRemove: elem 21 not in tmadm_free_list
    M  DpListInsert: elem 21 already in tmadm_inuse_list
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
    M  TrThHookFunc: called for task switch
    M  ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
    M  ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
    M  ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
    M  save task type/act rqtype ZTTASPO/5 of T21/M0
    M  TskhLoop: switch back to normal tracel level 1
    A 
    A Tue Apr 08 17:19:27 2008
    A  *** ERROR => TEXTENV_INVALID environment: [ablocale.c   205]
    A  *** ERROR => Locale=`unsupported' Lang=`E' [ablocale.c   211]
    A  *** ERROR => Country=`0AU' CodePage=`6200'. [ablocale.c   217]
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    M  ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13168]
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A 
    A Tue Apr 08 17:19:28 2008
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Tue Apr 08 17:19:28 2008
    Please help me out!
    Thank you very much!
    Edited by: lucy YANG on Apr 8, 2008 11:31 AM

    Check to see whether the profile parameter "zcsa/system_language" is set to a value other than D or E in the instance or default profile of the shadow system. If this is the case, change this parameter to D or E. Stop the shadow system and repeat the phase.
    How to Stop and Start Shadow sytem :
    Stopping the shadow instance
               Start R3up (as of Basis 700: SAPup) as the user <sid> adm as follows:
                 R3up (SAPup) stopshd
               Alternatively, you can stop the shadow instance as follows:
                 <upgrade_directory>/<SID>/homeshd/< SID>/stopsap DVEBMGS<SHDSYSNO> r3
               where <SHDSYSNO> is the instance number of the shadow system.
    Starting the shadow instance
               Start R3up (as of Basis 700: SAPup) as the user <sid> adm as follows:
                 R3up (SAPup) startshd
               Alternatively, you can start the shadow instance as follows:
                 <upgrade_directory>/<SID>/homeshd/< SID>/startsap DVEBMGS<SHDSYSNO> r3
               where <SHDSYSNO> is the instance number of the shadow system.
    Edited by: Shaji Jacob on Apr 8, 2008 4:38 PM

  • Error in phase SCEXEC_ALIAS in upgrade process(during preprocessing)

    Hi all experts,
    i encountered error during upgrade from 4.7 to ecc 6
    with message :
    severe error during SCEXEC_ALIAS phases
    file /usr/sap/<SID>/upg/abap/log/PTALDC00.LOG not found
    below is some related log content for this error:
    tail log of ULOG11_2
    Phase SCEXEC_ALIAS:
    <sid>adm       20110527220015    : /usr/sap/<SID>/upg/abap/exenew/tp pf=/usr/sap/<SID>/upg/abap/bin/EXDBNEW.TPP execdbscript <SID> -x PTALDC00.XQL DBEXECNONT DBEXECNOCHECK  (pid=512002)
    <sid>adm       20110527220016    : /usr/sap/<SID>/upg/abap/exenew/tp pf=/usr/sap/<SID>/upg/abap/bin/EXDBNEW.TPP execdbscript <SID> -x PTALDC01.XQL DBEXECNONT DBEXECNOCHECK  (pid=1204298)
    <sid>adm       20110527220017    :/usr/sap/<SID>/upg/abap/exenew/tp pf=/usr/sap/<SID>/upg/abap/bin/EXDBNEW.TPP execdbscript <SID> -x PTALDC02.XQL DBEXECNONT DBEXECNOCHECK  (pid=675990)
    tail log of SLOG701
    Phase SCEXEC_ALIAS:
    ERROR: Connect to <SID> failed (20110527190129, probably wrong environment).
    ERROR: Connect to <SID> failed (20110527190130, probably wrong environment).
    ERROR: Connect to <SID> failed (20110527190131, probably wrong environment).
    my questions are:
    1. where is the environment variable stored during this phase which is used by tp tool?
    i have checked the profile EXDBNEW.TPP and compared it with other profile in the same directory which have been used by tp before(phases before this one), which resulted in no different for every environment related value.
    2. i tried to emulate the execution of the command in ULOG11_2 with default environment of <sid>adm with adjustments(e.g db_ora_scheme=SHDTMP, DIR_LIBRARY= /usr/sap/<SID>/abap/exenew) it run with no error of wrong environment whatsoever >.<, so can i just point the environment scheme to <SID>SHD  and executed it manually?

    well, actually i did not looking at the right place at the error , my apologize for that.
    there are another error messages at this log file SCEXEC_A.ECO
    TRACE-INFO: 68:  [dev trc    ,00000]  -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=110b1b588)                          20  0.209414
    TRACE-INFO: 69:  [dev trc    ,00000]        SELECT USERID,PASSWD FROM SAPUSER WHERE USERID IN (:A0,:A1)                                                            
    TRACE-INFO: 70:                                                                                11  0.209425
    TRACE-INFO: 71:  [dev trc    ,00000]  -  oci_bind  ( 0: SQLT_STR, l=256, con_hdl=0, stmth_p=110b1b588, vp=9001000a10b6ea2,ip=0,rlp=0,rcp=0)
    TRACE-INFO: 72:                                                                                21  0.209446
    TRACE-INFO: 73:  [dev trc    ,00000]  -  oci_bind  ( 1: SQLT_STR, l=256, con_hdl=0, stmth_p=110b1b588, vp=fffffffffffd978,ip=0,rlp=0,rcp=0)
    TRACE-INFO: 74:                                                                                14  0.209460
    TRACE-INFO: 75:  [dev trc    ,00000]  -->oci_define ( 0: SQLT_STR, l=256, con_hdl=0, stmth_p=110b1b588, vp=fffffffffffda78,ip=fffffffffffd7a0,rlp=0,rcp=0)
    TRACE-INFO: 76:                                                                                13  0.209473
    TRACE-INFO: 77:  [dev trc    ,00000]  -->oci_define ( 1: SQLT_AFC, l=256, con_hdl=0, stmth_p=110b1b588, vp=fffffffffffdb78,ip=fffffffffffd7a2,rlp=0,rcp=0)
    TRACE-INFO: 78:                                                                                16  0.209489
    TRACE-INFO: 79:  [dev trc    ,00000]  -->oci_execute_stmt(con_hdl=0, stmth_p=110b1b588, iters=1, rowoff=0, dml_batch_errors=0)
    TRACE-INFO: 80:                                                                                13  0.209502
    TRACE-INFO: 81:  [dev trc    ,00000]  OCIStmtExecute() completed, rc=100=OCI_NO_DATA, no further data                  8738  0.218240
    TRACE-INFO: 82:  [dev trc    ,00000]    -> rc=1403=OCI_ERR_NOT_FOUND                                                    18  0.218258
    TRACE-INFO: 83:  [dev trc    ,00000]  <--oci_execute_stmt(rc=1403, iters-errors = 1-0) [time 0,009s]                    11  0.218269
    TRACE-INFO: 84:  [dbsloci.    ,00000]  *** ERROR => ORA-1403 when accessing table SAPUSER                                15  0.218284
    TRACE-INFO: 85:  [dev trc    ,00000]    set_ocica() -> SQL code 1403                                                    8  0.218292
    TRACE-INFO: 86:  [dev trc    ,00000]  -->oci_get_errmsg (con_hdl=0, rc=1403)                                              7  0.218299
    TRACE-INFO: 87:  [dev trc    ,00000]    OCIErrorGet -> SQL error code: 1403                                            20  0.218319
    TRACE-INFO: 88:  [dev trc    ,00000]    ORA-01403: no data found      
    TRACE-INFO: 101:  [dev trc    ,00000]  Assigning username to user session: con_hdl=0, usrhp=110c09428                      8  0.219570
    TRACE-INFO: 102:  [dev trc    ,00000]  Assigning password to user session: con_hdl=0, usrhp=110c09428                    12  0.219582
    TRACE-INFO: 103:  [dev trc    ,00000]  Starting user session: OCISessionBegin(con_hdl=0, usr=SAPR3SHD/<pwd>, svchp=110b045e0, srvhp=110b05e88, usrhp=110c09428)
    TRACE-INFO: 104:                                                                                133  0.219715
    TRACE-INFO: 105:  [dev trc    ,00000]    OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR                        6298  0.226013
    TRACE-INFO: 106:  [dev trc    ,00000]    OCISessionBegin(OCI_DEFAULT) failed with SQL error 28000:                      11  0.226024
    TRACE-INFO: 107:  [dev trc    ,00000]    ORA-28000: the account is locked                                                                              
    TRACE-INFO: 108:                                                                                10  0.226034
    TRACE-INFO: 109:  [dev trc    ,00000]  server_detach(con_hdl=0,stale=1,svrhp=110b05e88)                                    8  0.226042
    TRACE-INFO: 110:  [dev trc    ,00000]  Detaching from DB Server (con_hdl=0,svchp=110b045e0,srvhp=110b05e88)                9  0.226051
    TRACE-INFO: 111:  [dev trc    ,00000]  Deallocating server context handle 110b05e88 from con_hdl=0                      176  0.226227
    TRACE-INFO: 112:  [dbsloci.    ,00000]  *** ERROR => CONNECT failed with sql error '28000'                                14  0.226241
    TRACE-INFO: 113:  [dev trc    ,00000]    set_ocica() -> SQL error code 28000                                              7  0.226248
    TRACE-INFO: 114:  [dev trc    ,00000]  -->oci_get_errmsg (con_hdl=0, rc=28000)                                            7  0.226255
    TRACE-INFO: 115:  [dev trc    ,00000]    OCIErrorGet -> SQL error code: 28000                                            8  0.226263
    TRACE-INFO: 116:  [dev trc    ,00000]    ORA-28000: the account is locked                                                                              
    TRACE-INFO: 117:                                                                                10  0.226273
    TRACE-INFO: 118:  [dblink      ,00433]  ***LOG BY2=>sql error 28000  performing CON [dblink#4 @ 433]                      22  0.226295
    TRACE-INFO: 119:  [dblink      ,00433]  ***LOG BY0=>ORA-28000: the account is locked [dblink#4 @ 433]                      8  0.226303
    From the log, the problem actually lies in authorization for ops$user + locked shadow user account. After corrected these problems, the process continued. But this still bother me how this error came up since other tp processes(phases before this one) run successfully. But i will mark this question as answered. Thanks for all the attention and hope this will help others too ^^.

  • Error message when trying to upgrade from 10.3.9 to Tiger 10.4.5

    Hope somebody can help. I'm fairly recent to macs as have always built and used pcs. Am having trouble upgrading from current pantherOS to Tiger. Bought emac with upgrade disc provided by seller. Disc was gray labelled emac. Installation went fine and everything was proceeding to point it finished writing files, configuring installation, and running installer scripts and then it quit with message: error installing software. Try reinstalling.
    Tried reinstallation and same thing occurred. then Tried complete erase and new installation. Same error message.
    Came to discussion group searching for something I might be doing wrong. Decided maybe disc was wrong even though it specified emac which is what I am using. Bought generic install disc that would install on any G3/4/5 with minimum specs per hardware which system met.Installation proceeded as it was going to install same as emac disc. This is normal full install disc for generic installation.
    All installations screens came up and installation proceeded to same point as before and then quit with same message: error installing software/ Try reinstalling.
    Have removed ram to original 256MB and tried. No luck. I am using external DVD for installation of DVD and wonder if this is problem but in the forums external DVD seems to work alright. Can reinstall old Panther OS without any problem
    Ran hardware test and everything checked okay.
    Should I just forget about upgrading and use 10.3.9 but would really like to know what is wrong. thanks. Rick

    Welcome to Apple Discussions!
    See my FAQ:
    http://www.macmaps.com/upgradefaq.html
    and then consider the instructions here to Archive and Install:
    http://docs.info.apple.com/article.html?artnum=301270

  • MS System Center Operations Manager 2010 Download required for Upgrade from SCOM 2007 R2 (Select)

    We need the download of SCOM 2012 without Service Pack1.
    Upgrade from SCOM 2007 R2 (select license) fails while upgrade check with error: Logs shows "At least one of the following applications is installed on this computer. Due
    to incompatibility with System Center 2012 - Operations Manager, these applications must be uninstalled."
    Upgrade was started from dos elevated prompt with modified parameters like this:
    setup.exe /silent /upgrade
    /AcceptEndUserLicenseAgreement:1
    /UseLocalSystemDASAccount
    /DataReaderUser:<domain\user>
    /DataReaderPassword:<password>
    Research in internet and we found another person with same issue, which reports that direct upgrade from SCOM 2007 R2 to SCOM 2012 SP1 is not possible but if upgrade is done over
    SCOM 2012 to SCOM 2012 SP1 it succeeds.
    Unfortunately, we don't find any downloads for the first release of System Center 2012  e.g. Operations Manager.
    Everything shows Service Pack 1 or the newer R2.
    Who can help?

    Our “Recommended” rolling upgrade path looks like the following:
    SCOM 2007R2 CU4+ > SCOM 2012 RTM UR2+ >
    SCOM 2012 SP1 UR4+ > SCOM 2012 R2
    Also you can refer below link
    http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical

  • Error on schedule.aspx after upgrade from 2007

    Hi,
    i am upgrading from 2007 to 2013. Everything is fine exept i am having 2 issues :
    - i can't access (tried as admin and as project manager) the Schedule.aspx page i am getting the following message "you do not have sufficient permissions to view the specified page. Please contact your administrator for permissions to view this page."
    I checked the permissions on this PDP and as admin i have full control. In the ULS log i see the fololowing:
    11/21/2013 11:39:29.09  w3wp.exe (0x23A4)                        0x27F8 Project Server               
     General                        4zb0 Medium   Error is: GeneralSecurityAccessDenied. Details: User does not have permission
    to this view. . Standard Information: PSI Entry Point:  Project User: domain\epmadmin Correlation Id: 1b87b36e-8852-e311-a152-00505686371e PWA Site URL:
    http://server/PWA SA Name: Project Server Service Application PSError: GeneralSecurityAccessDenied (20010) Project:d15ee648-155f-47cc-b9a0-27c15a6d8242 d3bf589c-118d-b0bd-6d96-82c5a55627a7
    11/21/2013 11:39:29.09  w3wp.exe (0x23A4)                        0x27F8 Project Server               
     Server-side Project Operations aj4ii High     InitViewReportInfo ViewUid:e1c71617-f168-42cd-b01c-7225cf813f7a is not found. d3bf589c-118d-b0bd-6d96-82c5a55627a7
    11/21/2013 11:39:29.09  w3wp.exe (0x23A4)                        0x27F8 Project Server               
     General                        ahg2n Medium   The remote command PWAProjectGetProjectDetailsForGridJsonRemoteCommand encountered
    an unexpected exception. d3bf589c-118d-b0bd-6d96-82c5a55627a7
    - the second issue is: i can't open some projects in Project Pro 2013 i am getting the following error when opening:
    Job Type: Checkin
    Error ID: 9000(0x2328) could not checkin project. Please contact your system administrator to force checkin this project.
    Weird to get this error when trying to open a project (basicaly checking it out).
    I applied the March 12 2013 Update kb2768001 but did not help.
    Any help will be greatly appreciated.
    Regards,
    RD

    Hi,
    Ok i solved the Schedule.aspx issue: each user had to just simply change the view once they logged for the first time , refresh the page.
    I am still facing the issue of some projects not opening in Project Pro 2013: one thing i figured out is that these projects have mandatory fields that are empty: the fields were added after projects were created.
    Any idea how i can solve this ?
    Thx
    RD
    Hi RD,
    i have also done a Migration from Project 2007 to 2013, i have the same issue with the Schedule.aspx.
    Is there a way to solve the issue without to change the view for each user. We have 200+ users.
    thx tom

  • Where can i find documentation for upgrading from sytem 9.2.0.1 to 9.3.0

    Can anyone help me with this part ? I am looking for documents to upgrade from 9.2 to 9.3
    Thanks
    Jay

    All of the curent Hyperion docs can be found here:
    http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_1.htm

  • Right SAPup version for upgrade from ECC 5.0 to ECC 6.0

    Dear Expert!
    I am upgrading from ECC 5.0 to ECC 6.0 , but i have a erro, with SAPup tool, I don't know to select right SAPup version, please show me about that, thank you very much!
    Tru Hang

    Hi,
    As anil you have to download the Upgrade guide, therer you could see the clear information -about SAPup.
    they have mentioned the issues with SAPup and they have asked us to use new SAPup version due to the issues of Old SAPup version.
    have a look at the below notes
    821032  Corrections for SAPup release 7.00
    1056649  Corrections for SAPup release 7.10
    48184  Upgrade: Stopping a running R3up or SAPup
    1070771  Do not use SAPup version 7.00/2, build 24.094 !
    You can see lots of threads in SDN lot of threads talks about SAPup issues.
    -Srini

Maybe you are looking for

  • Can I purchase a TV season and download one episode at a time?

    So this is a noob question as I've never bought TV shows through iTunes. I want to buy all the episodes of a season in one payment, but I plan to download in 1080p so obviously it would be nice not to have to download all the episodes at once. Sure,

  • Problem with BB10 that still not fixed...when will we see them fixed?

    there are some problem that I have noticed on the Verizon network that is Gimping my BB10 experience which is not making me happy 1 The Verizon network is causing a big problem with remote file access. (still no update on a fix) 2 The Verizon network

  • NOKIA Series 60 Error HTTP Connection

    Hi.. Im developing a MIDlet that uses a HTTPconnection The MIDlet worked fine using the Default emulator (Grayphone and the ColorPhone). But when i tried it on NOKIA emulator (Series_60 MIDP_SDK for Symbian OS v 1_0) it couldnt create a connection. I

  • Replacing Macintosh HD

    I'm having some problems with my main HD in my G5. I purchased a new drive and I'm currently using SuperDuper to backup/copy/clone from one to the other with the new drive connected via external USB drive case. Am I correct in assuming that once this

  • Subcontracting output problremm..?urgent

    Hi guru’s Can anybody  guide me .. I m getting error in the output for s.c.challan. The header details are not printed properly. I have a document with 14 line items. While creating challan with ref to this doc, system automatically created 3 challan