Error in PO print out in ECC6.0 using Adobe

Friends,
I am working on ECC6.0 implementation. we are using adobe format to print purchasing document in SAP. I am getting below message when I try to print purchase order, please help to figure out the solution.
ADS:Request start time : Wed Jul 18 18:43:37 CDT 2007(200101). Message no.FPRUNX001.
I am not able to get other description on error message.
But this forms are working fine in Development system, but I am not able to make to work in Quality system. I checked up all configuration related to output forms and everything is fine.
Please advice.
Best Regards

Jaya,
I cannot help directly but I am directing you to a couple of posts on the subject which many be of some help.
Re: Adobe document service error: SOAP Runtime Exception
Search using "Adobe Document Services (ADS) error" in <a href="http://www.sapfans.com">http://www.sapfans.com</a>
Hope this helps.
H Narayan

Similar Messages

Error during COA print out from QC21

Hi All.
I am facing an error during COA print out form Trx.QC21.
The error along with it's diagnosis is paster here.
Message no. QC138
Diagnosis
No data is printed for batch number A070030 material 000000000550000063 , plant 1001.
This can be caused by the following:
Not all data was found for a characteristic in the certificate profile that is marked as obligatory.
No requested data was found for any characteristic in the certificate profile.
System Response
The creation of the certificate profile is canceled.
If the certificate is for a delivery item, the status of the message is set to Incorrectly processed.
I have:
Created the profile
Assigned the material to it.
The same MICs are maintained in the I.Plan, Lot, Profile.
The profile is released.
Pls HELP!!!!!
With Best Regards,
Shyamal Joshi

Hi Shymal,
after reading above thread i tried the cycle and succeed only thing i used MIC as ref. char.
just ensure following thingsss.... i wil suggest u try with new data
i wil brief with T_code for other reader also.
1. activate material with batch mangt. (MM01)
2. create Batch wrt above above matl. (MSC1)
3. create Char (CT04)
4. create class (Cl02)
5. create MIC with class char. (QS21) (i think here u used copy model MIC)
6. create cert. profile (QC01 with above MIC)
7. assign matl. to above cert. profile (QC15)
8.Create Insp. Plan (QP01 with above MIC only)
9.create insp. lot (auto or QA01)
10.Do RR, UD (QA32) click on cert. (OR QC22) view Print preview by giving proper inputs.
hope this wil help.......
SANTOSH KAMBLE

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.
This is very annoying and we need this stopped as we have made no changes to any of the adobe files. Please advise how to do this.
Customer Service DCC

I first tried the version without the deflated stream (so everything uncompressed) against the online repair tool to check/analyse it @ https://www.pdf-tools.com/osa/repair.aspx
And it says no error found, but the reader still want to save it when closing so i still had no clue at this point.
Fortunately, i finally found what was wrong with my generated PDF.
In my xref table, each object reference was not end by a full EOL, i only did put a newline char.
Now i have "carriage return" "newline" which is the full EOL and the reader is happy and close the file silently.
As suspected i did not follow correctly the specs on xref table
Now i'll go and figure what i did wrong with the deflate filter
Thanks for your help.

Rec'd error msg "File failed to be converted using Adobe Export PDF online"

Rec'd error msg "File failed to be converted using Adobe Export PDF online" when attempting to save a .PDF as a .DOC

Are you trying to convert through Adobe Reader (what version?), or directly at the https://cloud.acrobat.com/exportpdf website?
[topic moved to Acrobat.com Services forum]

Why a long and narrow image (400x2200)mm is cut off while printing on Epson 9880 using Adobe Illustrator?

Why a long and narrow image (400x2200)mm is cut off while printing on Epson 9880 using Adobe Illustrator?

3.2 you can make multiple clocks, each clock can have a different alarm.

I am too having the same error code come up. I am using adobe Muse version 7.0

I am too having the same error code come up. I am using adobe Muse version 7.0

Hi KarmaM
There is scheduled maintenance running as we speak.
During the maintenance procedure the Admin Console Access, Partner Portal, FTP, Dreamweaver extension, Muse, Business Catalyst APIs, Partner registration and Trial site creation will experience service interruptions impacting sites on ALL datacenters.
Also, there might be several intermittent website front-end interruptions for some sites on the United States datacenter
For live update please check status page: http://status.businesscatalyst.com/

Lighter print out of photos using Photoshop Elements 10 and Windows 7?

When I print directly from Elements 10, my photos come out much darker than when I print directly from my computer on Windows 7??
Is there a MAIN adjustment (not each photo) in the program which lightens all print-outs? My printer is fine. It copies photos properly and prints out from Windows (My Pictures) properly.
Donna in Joplin

Donna,
While you read up on color management (!!!), you may want to check the following:
Reduce the brightness of your computer screen. The default setting may be sub-optimal.
In Elements, go to Edit>color settings, and tick the option to optimize for computer screens
In Elements, open a picture, then go to File>print. Look for "More options", go to the color management tab, and under color handling drop-down, select "printer manages colors"
Suggest that you print from Editor, not from Organizer.
HTH

Error (InvalidArgsError) when Printing to a file with Adobe Acrobat 9.0 Interop SDK

Hi,
i am getting a error (Invalid arguments) when trying to print to a file with the Adobe Acrobat SDK 9.0. When i use Adobe Acrobat 7.0 it works correctly. I set the fileName Property as follow:
printerParamsType.InvokeMember("fileName", BindingFlags.SetProperty, null, printerParams, new object[] { path2RawFile });
fileName has the value: /c/temp/Rawfiles/df76eccc-2465-4f60-a4e7-d11d8da6ed64.prn
[9464] System.Reflection.TargetInvocationException: Ein Aufrufziel hat einen Ausnahmefehler verursacht. ---> System.Runtime.InteropServices.COMException (0x000003E9): InvalidArgsError: Invalid arguments.
thanks

Hello,
I'm sorry you're having trouble with Acrobat. Unfortunately,
these forums are specific to the
Acrobat.com website and its set of hosted services, and do
not cover the Acrobat family of desktop products.
Any questions related to the Acrobat family of desktop
products would be best suited in the Acrobat Forums:
Link to
Acrobat Forums
Thanks!
Michelle

Filling out pdf forms using adobe professional 6.0

I am trying to complete a form that is only available in pdf format. The form has lines where you are supposed to enter your information. I am using Adobe Professional 6.0. The "touch up text tool" allows me to add the text, but it removes the lines on the form. Using the line tool, I am able to underline the text I enter, but the line doesn't print out. If I try to printing with the "print with comments" option, it prints the line, but it also includes a comment with each of the lines. I read that the later versions of Adobe Professional have a "typewriter tool"--which seems like exactly what I need. Is there anything similar to that available for the Adobe Professional 6.0. Thanks!

Thank you everyone for your input. I found the best way to enter the information into the form was to use the "text field" tool(under tools, advanced editing, forms). I had to change the properties for the text field a little, so that the information would show up correctly on the form. Thanks again!

Unable to print to oversize pages using Adobe FrameMaker 9 \ 7.2 and Distiller 9.0

I am trying to print to PDF a publication that is full of oversize wiring diagrams from Adobe FrameMaker 9 and 7.2 with Distiller 9.0. The pages are all text and images ranging in size from standard A3 and A4 size sheets through to a foldout being 1470 mm W X 297 mm H. We have no problem printing A3, A4 and 630 mm W X 297 H. These are all Portrait images. When we set up our custom print size to accomodate the 1470 mm W X 297 mm H we get the pages without the content, and even some of the oversize pages are not the correct size on print.
The page sizes we are using are:
A4 (This is all good)
A3 (This is all good)
630 x 297 mm (This is all good)
840 x 297 mm (Problems from here on)
1050 x 297 mm
1260 x 297 mm
1470 x 297 mm
The procedures we are using to set up the printing are:
1. Print to PDF (Also tried save to PDF)
Under Print Setup make sure you select PDF Driver and select the Paper size as largest that is in your book. Example: If A4 and A3 pages, print to A3
2. Select Generate Acrobat Data and select
See attached Screen shots for the settings we are using:
Note: Back in FM Print dialogue; make sure Print to File is turned OFF, before you click Print
Any assistance would be greatly appreciated.
Regards
AJ Wilkinson

Create a specific FM file having a custom page size appropriate to each unique "content set".
Create a FM Book file.
Add the FM files.
Work up configuration (Hypertext, Cross-References, autonumbering, variables, etc.) as desired.
In Print Setup -
Set page size to the page size of the largest FM file in the Book.
(you may have to go into the Adobe Printer and add one or more custom page sizes so the page size needed is available)
Set orientation to landscape if any FM files are such.
Idea is, if needed, FM files for the content in the various page size/orientation that is appropriate to the content.
If that means 1FM file of custom size and appropriate orientation then do it.
Book files can deal with it.
Back to Page Setup.
Do the Page Size & Orientation.
Access 'Propertires' - is the Distiller job option selected the one you want/need?
Create one if need be so that it is available.
Go into the Print Book dialog.
Configure as needed (remember Acrobat data links, etc. &, oh yes, back in FM be happy with the configurations under tabs for PDF Setup).
Print the Book.
Use Distiller to take to output *.ps to *.pdf (may want the use a "watched folder")
Output PDF can/will reflect the the different page sizes and page orientations.
n.b., FM-Acobat-Distiller releases have a "sync band".
It is discussed somewhere in some kb articles.
I'm not sure if FM7.2 functions quite right with Distiller 9.
FM 8 will (&, of course FM 9)
I've had no problems with FM7.2 or FM8 and Distiller 8.
Be well...

I keep getting an error message "103:103". I'm using Adobe Reader 10.1 and Windows 7 Home.

I am using Adobe Reader 10.1 and Windows 7. I keep getting an error message "103:103." What is this indicate and how do I correct it?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Pictures print out dark when using Photoshop Elements

I am using Photoshop Elements 6. I pull my pictures up and they look beautiful on the monitor. However when I print them out they come out much darker. Has anyone else had this problem. I even got a new printer because I was told it was probably the problem. Still have the same issue.

Donna,
While you read up on color management (!!!), you may want to check the following:
Reduce the brightness of your computer screen. The default setting may be sub-optimal.
In Elements, go to Edit>color settings, and tick the option to optimize for computer screens
In Elements, open a picture, then go to File>print. Look for "More options", go to the color management tab, and under color handling drop-down, select "printer manages colors"
Suggest that you print from Editor, not from Organizer.
HTH

Cannot print out correct colors using Mac and Epson Artisan 1430

I recently switched from using Illustrator on my PC to using Illustrator on my IMAC. My display on the PC and the display on the IMAC show the graphics in the exact same colors. When I print a graphic from my PC in Illustrator on my Epson printer it is identical to the display on my PC. When I print the same graphic from my IMAC on my Epson printer, the color is not the same - it is a bit off. I have tried everything - what should I do?

Just checking, was this the driver you downloaded?
Printer Driver v8.31
Intel-based Macs with OS X (v10.4.11 - v10.6.x), PowerPC Macs with OS X (v10.4.11 - v10.5.8)
epson13988.dmg - 28.1MB - posted on 09/14/10
http://tinyurl.com/2bmj3as
Or this one...
Drivers and Utilities Combo Package
Intel-based Macs with OS X (v10.4.11 - v10.6.x), PowerPC Macs with OS X (v10.4.11 - v10.5.8)
epson13990.dmg - 80.8MB - posted on 09/14/10

I can not open a filled out pdf-form using Adobe Acrobat Pro X

I have a form in Indesign CS 5.5 and made it fillable with Adobe Acrobat Pro X. I enabled the 'additional features' to make the document a 'Reader extended pdf'. Whoever I send the form now, can fill it out and save it in (the free version of) Adobe Reader.
Problem is: when the recipients mail the filled out form back to me, I can not open the document. There is message that says: "There was an error opening this document. The file is damaged and could not be repaired."
However, when I receive the filled-out file not by email (MS Outlook on a IMac) but on a USB-stick or something, I can manage to open the document the way it was filled out.
I'm guessing something goes wrong in the mailing process...
Can anyone help me please?
Thanks!

Thanks for the advice!
I'm afraid though that the problem is situated with the provider of the sender (when I open the email with my hotmail or gmail-account, it' s the same problem).
The idea of compressing the forms into zip-files is not very usefull because - i'm guessing - 90% of the recipients have never heard about a zip-file and are surely incapable of making one.
Some other ideas?
Thank you though!

Printing sales order details using adobe forms

hi all,
i need to print the sales order header and the respective item details using the adobe form.my requirement is to print the header on each and every page.
for suppose my header is say '1' it contains 20 item details,and the page can hold 15 item details.
there the fist two pages should have the header number as '1' and ill trigger a new page when ever a new header comes.so that the next details starts from fresh page.
i am getting the item details on each and evry page.i want to get the header details also on the each and everypage.
can anyone suggest me good answer.

Hi
     If you want to get the header details on every page, do the following steps
           a) Select the Header row of a Table
           b) Go to the Object palette, select the Pagination tab
           c) Under Pagination tab check the check box "Include Header row in Subsequent Pages"
              So that the header will come on all the pages
Path: Select Header row -> Object palette -> Pagination tab -> Include Header row in Subsequent Pages
Thanks
Srikanth(sriiiiiiii)

Error in PO print out in ECC6.0 using Adobe

Similar Messages

Maybe you are looking for