Error in Release of Network data via BAPI_BUS2002_SET_STATUS

Hi Experts,
I have to release network data via a Custom Report Program, so I am using the STD BAPI , BAPI_BUS2002_SET_STATUS.
The functionality must be similar to the release of Network as in case of transaction CN22 or can also be done via Project Builder(Transaction CJ20N).
we r using the std BAPI as follows :
CALL FUNCTION 'BAPI_BUS2002_SET_STATUS'
    EXPORTING
      number                    = < NETWORK NUMBER >
      set_system_status = 'REL'
    IMPORTING
      return             = c_return
    TABLES
      e_result           = lt_result.
The error is Error in processing. Function was not executed . On further analysis, the Function Module CO_ZR_HEADER_RELEASE is causing the issue , not allowing network header data to be free.
The same functionality works via CN22. Please advice whether there is a need to pass further parameters or anything else.
Awaiting a response..
Regards,
Sonika

Hi,
there are some special requirements for using this BAPI. You need to call BAPI BAPI_PS_INITIALIZATION and BAPI_PS_PRECOMMIT with this BAPI. Check documentation for your BAPI. It's well documented there.
Cheers

Similar Messages

Error while creating vendor master data via ALE

Dear All
I am trying to create vendor master data via ALE.
I am using message type CREMAS.
I get following error message in inbound system
No batch input data for screen SAPMF02K 0610
Message no. 00344
If i try to manually create vendor , there is no error. This particular screen belong to withholding tax, however all customizing settings for withholding tax are okay.
please help.
Thanks
Sanjeev

Try SAP Note # 96312 if that helps.

ERROR: capturing outparam - Oracle DB 'Date' via 'introspected procedure'

Hi,
We have an introspected stored proc (oracle db stored proc which originally returns Oracle 'Date' ). The introspected 'signature' has output params as 'Feugo.Lang.Time'.
When we 'call' the procedure from an automatic activity, (just a bare minimum call), we get a compilation error. "Error, contact oracle support - should be Java.Util.Date and not Feugo.Lang.Time" for no fault of ours :(...
Is there any workaround to the same? The date returned therein is an important and decisive data for us to process contracts. :!
Thanks in advance,
Pavan.

Hi
Did you chk this blog
DATE/TIME datatypes and Oracle Database
BR

Error trying to extract data via HFM objects

I've written a program to extract selected data from HFM (version 11.1.1.3.500) using the API objects. The program (shown at the bottom of this post) is failing on the 2nd of the following 2 lines:
oOption = oOptions.Item(HSV_DATAEXTRACT_OPT_SCENARIO_SUBSET)
oOption.CurrentValue = lBudgetScenario
where oOption is a data load/extract object previously initialized and lBudgetScenario is the long internal ID for our budget scenario.
The error is usually "COM Exception was unhandled" with a result code of "0x800456c7", but, mysteriously, even with no code changes, it sometimes throws the error "FileNotFoundException was not handled", where it says that it could not load "interop.HSXServerlib or one of its dependencies". The second error occurs even though HSXServer was previously initialized in the program and used in conjunction with the login.
I've carefully traced through the VB.NET 2010 code and find that all relevant objects are instantiated and variables correctly assigned. It also occurred to me that the data load DLLs might have been updated when the 11.1.1.3.50 and 500 patches were applied. For that reason, I removed the references to those DLLs, deleted the interop files in the debug and release folders and copied the server versions of those DLLs to my PC. I then restored the DLL references in Visual Studio which recreated the interops. However, the error still occurs.
The ID I'm using (changed to generic names in the code below) has appropriate security and, for example, can be used to manually extract data for the same POV via the HFM client.
I've removed irrelevant lines from the code and substituted a phony ID, password, server name and application name. The line with the error is preceded by the comment "THE LINE BELOW IS THE ONE THAT FAILS".
Imports HSVCDATALOADLib.HSV_DATAEXTRACT_OPTION
Module Module1
Public lActualScenario, lBudgetScenario As Long
Public oClient As HSXCLIENTLib.HsxClient
Public oDataLoad As HSVCDATALOADLib.HsvcDataLoad
Public oOptions As HSVCDATALOADLib.IHsvLoadExtractOptions
Public oOption As HSVCDATALOADLib.IHsvLoadExtractOption
Public oSession As HSVSESSIONLib.HsvSession
Public oServer As HSXSERVERLib.HsxServer
Sub Main()
'Create a client object instance, giving access to
'the methods to logon and create an HFM session
oClient = New HSXCLIENTLib.HsxClient
'Create a server object instance, giving access to
'all server-based methods and properties
oServer = oClient.GetServerOnCluster("SERVERNAME")
'Establish login credentials
oClient.SetLogonInfoSSO("", "MYID", "", "MYPASSWORD")
'Open the application, which will initialize the server
'and session instances as well.
oClient.OpenApplication("SERVERNAME", "Financial Management", "APPLICATION", oServer, oSession)
'Instantiate a data load object instance, which will be used to extract data from
'FRS.
oDataLoad = New HSVCDATALOADLib.HsvcDataLoad
oDataLoad.SetSession(oSession)
'Initialize the data load options interface.
oOptions = oDataLoad.ExtractOptions
'Find the internal ID numbers for various scenarios and years.
'These are required for HFM API function calls.
lActualScenario = GetMemberID(DIMENSIONSCENARIO, "Actual")
lBudgetScenario = GetMemberID(DIMENSIONSCENARIO, "Budget")
'Construct file names for open data.
strFileName = "c:\Temp\FEWND_BudgetData.dat"
strLogFileName = "c:\Temp\FEWND_BudgetData.log"
'Extract data for the current open cycle.
ExtractData("Budget", BudgetYear, "Dec", strFileName, strLogFileName)
End Sub
Sub ExtractData(ByVal strScenario As String, ByVal strYear As String, ByVal strPeriod As String, _
ByVal strFileName As String, ByVal strLogFileName As String)
'Populate the Scenario element.
oOption = oOptions.Item(HSV_DATAEXTRACT_OPT_SCENARIO_SUBSET)
If strScenario = "Actual" Then
oOption.CurrentValue = lActualScenario
Else
'THE LINE BELOW IS THE ONE THAT FAILS
oOption.CurrentValue = lBudgetScenario
End If
End Sub
Function GetMemberID(ByVal lDimID As Long, ByVal strMemLabel As String) As Long
Dim oMetaData As HSVMETADATALib.HsvMetadata
oMetaData = oSession.Metadata
oEntityTreeInfo = oMetaData.Dimension(lDimID)
GetMemberID = oEntityTreeInfo.GetItemID(strMemLabel)
End Function
End Module

I stumbled upon the solution to my problem. The documentation for extracting data via objects defines member ID variables as Longs. In fact, I've always defined such variables as longs in previous object programs and had no problems. It appears that the datal load/extract "option" property of "Currentvalue" is defined as integer. When I changed all of my member ID items (such as the "lBudgetScenario" variable that was the right-side of the failing assignment statement) to be integers, the program worked.

FMS 3.5 says 'Bad network data': error in handling RTMP extended timestamps / chunkSize?

Hello all,
For a client, I am working on a project where a live RTMP stream is published to an Adobe FMS 3.5.6 server from a java application, using Red5 0.9.1 RTMPClient code.
This works fine, until the timestamp becomes higher than 0xFFFFFF after 4.6 hours, and the RTMP extended timestamp field starts being used. I have already found: when the extended timestamp was written after the header, the last 4 bytes of the data were being cut off. I have fixed this locally, and now the data being sent seems to me to be conformant to the spec. However, FMS still throws an error message in the core log and then kills the connection from the Red5 client. Here is the error message:
This is the error message:
2011-06-03 14:28:02 13060 (e)2611029 Bad network data; terminating connection : chunkstream error:message length 11893407 is longerthan max rtmp packet length -
2011-06-03 14:28:02 13060 (e)2631029 Bad network data; terminating connection : (Adaptor: _defaultRoot_, VHost: _defaultVHost_, IP: 127.0.0.1, App: live/_definst_, Protocol: rtmp, Client: 5290168480216205379, Handle: 2147942405) : 05 FF FF FF 00 13 = 09 01 00 00 00 01 00 01 01 ' 01 00 00 00 00 00 13 4 09 0 00 00 01 ! 9A & L 0F FA F6 12 , B4 A6 CE H 8A AB DC G BB d k 1B 9F ) 13 13 D2 9A E5 t 8 B8 8D 94 ! 8A AE F6 AF } " U 0 D3 Q EF FF ~ 8D 97 D9 FF BE A3 F3 C9 97 o 9D # F9 7F h A4 F7 } / FB & F1 DC 9C BF BD D3 E7 CA 97 FE E2 B9 E4 F7 9E 1A F6 BA } C9 w FC _ / / w FE n EF D7 P 9C F4 BE 82 8E F7 | BE 97 B4 BB D7 FE ED I / FB D1 93 9A F9 X \ 85 BD DD I E3 4 E8 M 13 D3 " ) BE A9 92 E5 83 D4 B4 12 DE D5 A3 E6 F4 k DE BF Q 3 A0 g r A4 f D9 BD w * } F7 r 8A S 2 . AB BD EE ^ l f AF E1 0B $ AF 9D D7 - BF E8 ! D3 } D3 i E3 B8 F2 M A8 " B1 A5 EF s ] A5 BC 96 E5 u e X q D2 F1 r F9 i 92 b EE Z d F9 * A6 BB FD 17 w 4 DD 3 o u EB ] ] EF FE B5 B1 0A F2 A0 DD FD B2 98 DF E8 e F6 CB FD 96 V % A5 D5 k ] FD w EF AF k v AA E8 ! 9F / w BE FA 9A _ E F2 D3 , ? 17 } AD 7 EC B3 } 07 B5 | z { { A5 = 11 90 CF BF ; 4 FE EF 95 F7 E7 DF B9 , AF z 91 CF C9 BD DE CB { F5 17 } F2 E5 D7 DF z E6 [ 96 > Y m 9F EB AF DD D8 E8 v B9 A8 E9 % A7 | 1 CF 8B D Z k N DF F8 N FA S R FE . ~ CB A 9 E1 ) 8F 8E BB EC c 6 13 F1 AC FD FD FC 8A F7 F3 K B9 FA ^ / A4 FC B9 AA F6 DE C2 [ 1A E c r B3 BF E5 EC B5 x 94 FD . A9 t I Q % EA EC DE | K FE z A4 97 F9 " 1 0F CA FB F5 F5 p 9E 99 3 - ; B8 F4 F1 FF t A3 EC BC # DE AC 91 13 19 o < 06 F5 FD 7F 7 _ $ D B t B5 0D 8A C1 C1 BA 0B FE DB B7 83 _ } BD z F7 CB { FC M A9 8D = D5 B1 < 85 = EF E1 ; BA H y FC BC B4 C A2 D9 ` e E4 94 H 5 13 ' 93 93 8E E C2 1C R 97 9 X B7 FF 10 9F { ) F1 CF AB AC ] EE H A2 DE D3 C5 m F6 K A2 A7 A2 89 D2 z EB DF 97 ^ k 9E 99 BB E7 B6 97 w { ~ + C7 B2 } FE ' C4 | B6 o H DD r A8 9F DC FF F9 Q b l 93 T B6 EE FF 11 j CD s P C F1 3 R I F8 D8 R 9D 93 AA D5 + DE FC BE " B9 E1 ` CB BD 0F F5 C7 AA w CF 8D p 9A F7 g f N FF 84 B7 K Q 93 g E1 - D3 s } w v AE 96 98 ED CF BA E9 2 . f 99 95 97 o 13 CA F7 s e $ F4 B5 15 C4 A8 DE M F7 w \ 8D 00 C6 C2 b D3 / 7 w F2 ' BF CD 89 FF > D7 FB BC A2 S N FB A5 CD AF D3 F9 9D DF AE B5 17 CF 9D B7 , B9 9 ^ 7F [ 93 84 F7 } _ EA DF u \ 99 Z t E CA M EF 7 " AD FE 92 9E n 7F EB D8 C { 99 8B 9E w H BF B1 | g 9F F3 FA E1 - E5 CB BB x CF p 8B D2 w v EF w FA E2 F7 s C5 AC $ FC B4 DB BE G E4 DC F0 A0 96 F3 ! t DC FF % A5 CB A4 ^ AB D2 BD E7 9A E ' 08 + AF U 17 EB 8A w A7 N E4 A5 x 93 12 _ - ; 09 DD DF m 11 BE w \ } BA D3 t BC D9 97 9B C5 7F D8 H F1 D 7 8A ^ FA n F0 B8 W E6 84 5 - 8 B5 h o C4 F7 83 P 88 CB AE m t BB L 95 A9 s 90 A2 Y o DF K _ / l D2 D1 C9 91 ' E4 BD / / D 97 m BB E7 14 93 % C5 ; DD CF D8 : ~ B5 4 F FA U F0 8F w w DC FD 83 FC 13 EF w p DA A5 07 _ * - 1D 14 9D D5 84 F E6 F0 FF E4 15 w n A5 9F DE d AE F5 " - f D2 AE 96 1F # FA F1 x C1 L DF l M 06 8A E4 z DB 17 BA l DA e 15 CD 85 86 1F 09 82 h ] C6 { E7 C5 AF Z C5 B0 83 v D9 03 FC / ~ -
The message for which the hex dump is displayed, is a video message of size 4925 bytes. Below is the basic logging in my application:
*** Event sent to RTMP connector: Video - ts: 16777473 length: 4925. Waiting time: -57937, event timestamp: 16777473
14:28:02.045 [RtmpPublisher-workerThread] DEBUG o.r.s.s.consumer.ConnectionConsumer - Message timestamp: 16777473
14:28:02.045 [RtmpPublisher-workerThread] DEBUG o.r.s.n.r.codec.RTMPProtocolEncoder - Channel id: 5
14:28:02.045 [RtmpPublisher-workerThread] DEBUG o.r.s.n.r.codec.RTMPProtocolEncoder - Last ping time for connection: -1
14:28:02.045 [RtmpPublisher-workerThread] DEBUG o.r.s.n.r.codec.RTMPProtocolEncoder - Client buffer duration: 0
14:28:02.046 [RtmpPublisher-workerThread] DEBUG o.r.s.n.r.codec.RTMPProtocolEncoder - Packet timestamp: 16777473; tardiness: -30892; now: 1307104082045; message clock time: 1307104051152, dropLiveFuturefalse
14:28:02.046 [RtmpPublisher-workerThread] DEBUG o.r.s.n.r.codec.RTMPProtocolEncoder - !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!12b Wrote expanded timestamp field
14:28:02.046 [NioProcessor-22] DEBUG o.r.server.net.rtmp.BaseRTMPHandler - Message sent
I have captured the entire frame containing this message with wireshark, and annotated it a bit. You can find it here:
http://pastebin.com/iVtphPgU
The video message of 4925 bytes (hex 00 13 3D) is cut up into chunks of 1024 bytes (chunkSize 1024 set by Red5 client and sent to FMS). Indeed, after the 12-byte header and the 4-byte extended timestamp, there are 1024 bytes before the 1-byte header for the next chunk (hex C5). The chunks after that also contain 1024 bytes after the chunk header. This appears correct to me (though please correct me if I'm wrong).
When we look at the error message in the core log, the hex dump displayed also contains 1024 bytes, but it starts from the beginning of the message header. The last 16 bytes of the message chunk itself are not shown.
My question is this: is the hex dump in the error message always capped to 1024 bytes, or did FMS really read too little data?
Something that may be of help, is the reported 'too long' message length 11893407. This corresponds to hex B5 7A 9F, which can also be found in the packet, namely at row 0c60 (I've annotated it as [b5 7a 9f]. This location is exactly 16 bytes after the start of the 4th chunk data, not really a place to look for timestamps.
My assumptions during this bug hunting session were the following (would be nice if someone could validate these for me):
- message length, as specified in the RTMP 12 and 8-bit headers, defines the total number of data bytes for the message, NOT including the header of the first message chunk, its extended timestamp field, or the 1-byte headers for subsequent chunks. The behaviour is the same whether or not the message has an extended timestamp.
- chunk size, as set by the chunkSize message, defines the total number of data bytes for the chunk, not incuding the header or extended timestamp field. The behaviour is the same whether or not the message has an extended timestamp.
I believe I've chased this problem as far as I can without having access to the FMS 3.5 code, or at least being able to crank up the debug logging to the per-message level. I realize it's a pretty detailed issue and a long shot, but being able to publish a stream continuously 24/7 is critical for the project.
I would be very grateful if someone could have a look at this hex dump to see if the message itself is correct, and if so, to have a look at how FMS3.5.6 handles this.
Don't hesitate to ask me for more info if it can help.
Thanks in advance
Davy Herben
Solidity

Hello,
It took a bit longer than expected, but I have managed to create a minimal test application that will reproduce the error condition on all machines I've tested on. The application will simply read an H264 file and publish it to an FMS as a live stream. To hit the error condition faster, without having to wait 4.6 hours, the application will add a fixed offset to all timestamps before sending it to the FMS.
I have created two files:
http://www.solidity.be/publishtest.jar : Runnable java archive with all libraries built in
http://www.solidity.be/publishtest.zip : Zip file containing sources and libraries
You can run the jar as follows:
java -jar publishtest.jar <inputFile> <server> <port> <application> <stream> <timestampOffset>
- inputFile: path to an H264 input video file
- server: hostname or IP of FMS server to publish to
- port: port number to publish to (1935)
- application: application to publish to (live)
- stream: stream to publish to (output)
- timestampOffset: nr of milliseconds to add to the timestamp of each event, in hexadecimal format. Putting FFFFFF here will cause the server to reject the connection immediately, while FFFF00 or FFF000 will allow the publishing to run for awhile before the FMS kills it
Example of a complete command line:
java -jar publishtest.jar /home/myuser/Desktop/movie.mp4 localhost 1935 live output FFF000
Good luck with the bug hunting. Let me know if there is anything I can help you with.
Kind regards,
Davy Herben

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. Any suggestions please?

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
Or any other suggestions please? Thanks

As pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.

I Have a iPhone 4s and I keep getting this error "Could not activate cellular data network" I have sprint and to use any internet om my iphone i have to connect to wifi. What do i do to fix my celluar connection. I took my sim card and put it back in.

I Have a iPhone 4s and I keep getting this error "Could not activate cellular data network" I have sprint and to use any internet om my iphone i have to connect to wifi. What do i do to fix my celluar connection. I took my sim card and put it back in and it still didnt work.

Davidb24 wrote:
Ok but im not the one who pays tge sprint bill
Apparently, no one pays it... That's why they shut off your service.

Why I face the error could note activate cellular date network

I have IPhone since three months, I bought it from Egypt and each time I lose the network signal then I catch it back I can't browse or use Internet at all ad I see error " could not activate cellular data network" even I didn't go abroad how can I fix that

Go to Settings > General > Network > Cellular Data should be "ON"

I am getting the error "Unable to connect to data warehouse management server" when I try to register it DWMS

I have a Data Warehouse Server that appears to be functioning but is running System Center Service Manager 2010 (w/ out SP1), Also have a functioning Configuration Management Server with Reporting Services Point installed the is running System Center
2012. Both systems are VM's running Windows Server 2008 R2 Enterprise w/ SP1 fully patched. Both systems are running SQL Server 2008 R2 as well. When I try to register the Data Warehouse Server via the GUI using the console or in Powershell it errors
out. Particularly on the GUI with the error "Unable to connect to data warehouse management server". I can browse to it, ping it, get the configuration management reports to run and show my AD assets, etc... but it will not register the DWS. I have
tried every suggestion TechNet has to offer and I am hitting a wall. Can someone please, please, please help!?!

unplug modem and router and reboot.
check setting for network, verify password.
sign in. Enter computer information.
let me know if this works.

How to extract data via webservices and configure webservices in BI 7

Hi to all,
Can any body tell me How to extract data via webservices and configure webservices in BI 7.
i have created a remote functionmodule which extract data from R/3 , now i want to upload data to BI 7 using that remote function module.
i have use webservice (push) as adapter mode, as i want to connect function module with SOAP , via web services.
please can any body tell how to do that.
also how to configure the webserive , what is it .
I SHALL BE THANKFULL TO YOU FOR THAT
Regards
Pavneet rana

Hi,
1. Using the function library (transaction SE37), call the Web service creation wizard.
To do this, select the desired function module in the function library and choose Utilities ®Generate Web Service ® From the Function Module.
2. Go through the following steps, shown in the wizard:
a. Create a virtual interface.
The virtual interface represents the interface between the Web Service and the outside.
b. Choose the end point.
The name of the function module that is to be offered as Web service is already entered here.
c. Create the Web service definition.
The Web service definition helps with assigning the Web service features, such as how security can be guaranteed in data transfer.
d. Release the Web service.
The wizard generates the object virtual interface and Web service definition in the object navigator.
The function group that was generated when the XML DataSource was created is not transportable and is thus assigned to a local package. To prevent errors due to transports, make sure that the objects that were generated in the Web service creation wizard are assigned to a local non-transportable package.
The Web service is released for the SOAP runtime.
3. In the virtual interface for the import parameter DATASOURCE, define the name of the XML DataSource as the fixed value.
A separate function group is generated for each XML DataSource. It makes sense to pre-assign the parameter DATASOURCE with the name of the XML DataSource in the virtual interface of the Web service for which the function group was generated.
If you do not pre-assign the parameter, it will be necessary to transfer the data sent with the appropriate filled DataSource element, for example, by setting the value in the application that implements the Web service.
a. In the object navigator, choose the name of the package in which the Web service was created and choose Enterprise Services ® Web Service Library ® Virtual Interfaces.
b. Choose Change in the context menu for the virtual interface.
c. For the virtual interface, remove the flags exposed and initial and enter the name of the XML DataSource in apostrophes, for example u20196ADATASOURCENAMEu2019.
d. Activate the virtual interface.
Regards,
Marasa.

ORA-01552 Error when trying to import data

I get the following error when trying to import data into my database. My version is as follows:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
and I get the following error:
ORA-01552: cannot use system rollback segment for non-system tablespace
Any help would be appreciated.
Also when I upgraded my database I received the following error message but continued without fixing:
Warnings Ignored: Your database is using US7ASCII as the NCHAR type. In Oracle9i, the NCHAR datatypes (NCHAR, NVARCHAR2, and NCLOB) are limited to the Unicode character set encoding (UTF8 AND AL16UTF16) only. Refer to the Oracle 9i Database Upgrade Guide to change NCHAR columns in user tables to one of the supported types.
Can I fix this via an sql statement or what?

Hi, i think that the problem is around the rollback segments.The solution is bring other rollback segments ONLINE state, if not exist others rollbackup,then you need create the other rollback segments and bring online state.
If you need more information, you will must see the next DOC-ID on Metalink site,
Note:121971.1
Luck.
Have a good day.
Regards.

Accessing a network resource via javascript

Hello,
we have been using Adobe Reader for linux provided by the yum repository for quite some time, without major issues. Currently, however, we are seeing a mysterious problem with a PDF form which is designed to exchange data with a local server, using javascript functionality, as far as I can see. On one of our machines (running CentOS 5.8 64-bit) this has stopped working recently, and I cannot figure out why. Clicking the respective field simply has no effect, there is no error message, neither in the Reader window, or on the console, both in normal mode and debug mode. Nothing in the system logs either. The function simply seems to be ignored!
Some observations which might be helpful:
1. Uninstalling and reinstalling the Reader package, after clearing all personal preferences, did not have any effect.
2. Using a fresh version of the PDF form did not solve the problem.
3. Firewall and SElinux are disabled anyway.
4. With a "clean" account on the same machine, the same problem occurs.
5. On a very similar machine (same OS, same Reader version) the operation is working properly!
So it seems to be something specific to this machine, but not specific to a certain account. It is obviously neither a corrupted Reader installation, nor a problem with this specific reader version, nor a corrupted PDF form. Now I am running out of ideas...
Any suggestions what else might be preventing network access (via javascript) from functioning properly? Javascript itself is (by default) enabled in the preferences.
Thanks in advance
Oliver

Sorry for the double post, but help would be appreciated...

Error during release of production order - AFS Specific

Hi SAP gurus,
Iam getting error during release of production order in AFS specific system during COHV transaction. Error is ''Error calling ATP server'' and message no is AG022. But when we read the PP master data then this error is cleared and production order is released.
Thanks & Regards,
N. Laxman

hi
1. When mass conversion of AFS planned order to production order is performed via COHV, the resulting production order does not contain the SKU details of the component.
2. When a planned order is converted to a production order & an ATP is carried out on the production order, Message no.AG022 - 'An error occurred during Remote Function call on the ATP Server' is issued by the system.
so you need to use the note 1087613.
read the note and apply with the help of technical team ABAP and BASIS
-ashok

[SOLVED] Subversion, xinetd, and "Malformed network data"

Hi,
I currently have a Subversion 1.5.2 server running through svnserve + xinetd. When I attempt to connect to my subversion server, however, I get:
svn: Malformed network data
Below is the contents of my xinetd config for subversion:
service svn
flags = REUSE
socket_type = stream
wait = no
user = svn
group = svn_group
server = /usr/bin/svnserve
server_args = -i -r /srv/svn/repo
log_on_failure += USERID
disable = no
This is located in the file: /etc/xinetd.d/svn
I run the following command only to find that it fails:
$ svn ls svn://localhost/myrepository
svn: Malformed network data
I've checked my xinetd log, however I see no failure. I can even put a completely bogus repository URL into SVN and it'll still give the same error:
$ svn ls svn://localhost/iosudohslkj2223oijosdijfaksjdlfkj
svn: Malformed network data
Anyone have any idea what could be causing this?
Last edited by void.pointer (2008-10-15 13:42:50)

I found out via telnet that one of my directories didn't have execute permission, so it couldn't step into the child directories.

BB 9330 - turning off mobile network data services causes BIS WiFi connection to change to not connected

re: v. 6.0.0.719 bundle 3084 platform 4.4.0.560 update
1. History.
a. Received BlackBerry Curve 9330 out of the box with bundle 2333 installed (but missing Verizon Visual Mail Message app.) Installed BB Desktop Software on laptop, connected smartphone to PC, Attempted to install bundle 3084, but initialization apparently failed, phone still showing bundle 2333 installed and no VVM app. Browser app unable to connect to network. On second try was able to complete 3084 install. Still no VVM app. Now some times the browser connects, sometimes it does not. Browser not connecting appears to be BB software bug. VVM issue appears to be one for the service provider.
b. Data service is currently Verizon BlackBerry Social Messaging Data Package which is suppose to have BlackBerry Internet Services via WiFi per Verizon FAQ doc.
2. Problem. With an active WiFi connection the Browser app is not connecting via WiFi giving a error message that WiFi service is required.
Investigation found if mobile network data service was turn off in Mobile Network Options, the BlackBerry Internet Services connection status was changed from connected to "WiFi" to "not connected". Browser appears to work ok when mobile network data service is turned on. BIS connection to WiFi comes back on. Not sure at this point if web data is going via mobile network or WiFi.
I am wondering if other BB 9330 Verizon users are seeing the same symptoms.
Bill
P.S. I could not find where to report this apparent software bug. So I hope is the right place.

If you have your Mobile Network as well as Wi-Fi turned on, your phone will default to the Wi-Fi for browsing (assuming you have a strong Wi-Fi signal). Leaving both on will allow you to browse as well as receive calls and texts.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Error in Release of Network data via BAPI_BUS2002_SET_STATUS

Similar Messages

Maybe you are looking for