Error in replicate created BP in CRM 7.0 to ERP

Hi you all.
When I create a new BP in CRM, and go to SMW01 the BDOC gives un error, the message is that I didn't fill all required fields.
I've check and the account group that should recieve the BP in ERP don't have in obrigatory fields.
The strange is that when I did the initial load ERP->CRM every thing went fine, and also the delta changes went ok. My problem is only in the creation of new BP in CRM, that should be replicated to ERP.
Can anybody help with some clues?
Thanks

Hi Rui,
For me the best way to identify the field(s) that are causing the trouble is to debug the creation of the BP, in the ERP system.
Maybe there you'll find the missing information you need.
If you're willing to give a try, when you create a business partner in CRM the function CRM_UPLOAD_AFTER_MAP_HANDLER calls a remote ERP function called CRM_UPLOAD_TRIGGER.
This function will call another functions that are configured in the system (I think is table CRM_BUPA_CALL_FU). One of them is PI_BP_PROXY_BAPI_CUSTOMER that will start gathering the information and will create the customer in include LVV02F3J.
For me, the best spot to put the break-point is in include LVV02F3J, after the CALL TRANSACTION statement. The error messages will be in T_BDCMSGCOLL parameter, and there maybe you'll find the help you need to find the problem.
Kind regards,
Garcia

Similar Messages

Lot of build errors in project created for debug CRM 5.0

Hi SDN!
I want to setup java debugging for CRM 5.0 modified application. According to note 1154496 I created project "crm_b2b".
I took file src.zip from
server\usr\sap\<system name>\<instance>\j2ee\cluster\<server number>\apps\sap.com\crmb2b at first try and from
server\usr\sap\<system name>\<instance>\j2ee\cluster\<server number>\apps\sap.com\crmcrb2b at second try. After import NWDS performed building for my project and shows lot of build errors (more than 12 thousands for 1-st try and near 2 thousands for 2-nd try). I reduced some of error by adding jar files from crm war file to build path. But I don't know how to resolve errors like "The method hasPermissions(Permission[]) in the type UserBase is not applicable for the arguments(EserviceHierarchyPermission[])" (error in com.sap.eservice.common.user.permission.CommonPermission.java, line 186). Also some of errors concerned with requierd libraries in build path.
My NWDS is 7.0.14
CRM 5.0 SP 11
Regards, Lev
Edited by: Lev Kulaev on Jul 3, 2008 2:03 PM

Hi!
Here are my doings:
1) set breakpoint in standart code
2) run my debug configuartion
3) run CRM 5.0
4) NWDS stopped execution on breakpoint
5) I right-click on variable, choose "Watch"
6) NWDS shows me "error during evaluation" in "Expression" tab for selected variable
I'm confusing since it was possible to use "Watch" for variables in CRM 4.0.
Yes, you right, I can view all variabe values on "Variables" tab. I wanted to use "Expression" tab because it's more comfortable for me but it seems that I can use only "Variables" tab.
So, thanks for help! My question is answered, but if you can give me more information about subject, you're welcome.
Regards, Lev

Error when replicate sales order from crm to r3

Hello Guys,
When I replicate a sales orders from a CRM system to R3 system the system does the following error in the smw01:
queue name: R3AD_SAL_ERR
error1:
Please enter sold-to party or ship-to party
Nº mensagem VP112
error2:
Sales document XXXX was not changed
Nº mensagem V4219
Any idea, why this happens?
Mary

Hello guys,
I have solved my problem by my own.
The problem was in the distribution of partner functions from crm to R3 (spro -> CRM->Basic Functions-> Partner processing->Data Transfer-> distribution of partner functions from crm to R3).
The partner functions assigned to sales orders in R3 was the AG, WE, RE and RG, and in the CRM was SP, SH, BP, PY, the partner functions map wasn't correct
I have had to map the correct partner functions between crm and r3. I have put in CRM the same partners functions that R3.
Best regards
Mary

Runtime Error ( EXPORT_NO_SHARED_MEMORY ) while creating order in CRM

Hi All,
i am getting runtime error while creating order in CRMD_ORDER. details of error is provided below
Runtime Errors         EXPORT_NO_SHARED_MEMORY
Exception              CX_SY_EXPORT_NO_SHARED_MEMORY
Date and Time          29.01.2009 02:07:58
Short text
     Der EXPORT-Datencluster ist zu groß für das SHARED MEMORY.
What happened?
     The current program had to be terminated because
     a capacity limit has been reached.
What can you do?
     Please make a note of the actions and input which caused the error.
     To resolve the problem, contact your
     SAP system administrator.
     Select the "Print" function to obtain a hardcopy of the
     current termination message.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_EXPORT_NO_SHARED_MEMORY', was
      not caught in
     procedure "CRM_EVENT_PUBLISH_OW" "(FUNCTION)", nor was it propagated by a
      RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
The reason for the exception is:
This is probably due to a very large dataset, for which there are
insufficient resources in your installation.
Das SHARED MEMORY kann Objekte nur bis zu einer bestimmten Maximalgröße
speichern (1) und hat selbst eine beschränkte Größe (2).
In diesem Fall wurde die Größe 2 überschritten.
to correct the error
Mit den Profilparametern rsdb/esm/buffersize_kb und
rsdb/esm/large_object_size kann man diese Größen verändern.
Informationen über diese Parameter erhalten Sie mit der
Transaktion RZ11.
Beachten Sie jedoch, dass aus Performancegründen ein einzelnes
Objekt nicht den größten Teil des Puffers belegen darf, so dass die
maximal zulässige Objektgröße erheblich unter der Gesamtgröße des
Puffers liegt.
The exception must either be prevented, caught within proedure
"CRM_EVENT_PUBLISH_OW" "(FUNCTION)", or its possible occurrence must be
declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:

Hello Sudhir,
Have you set the user parameter CRM_EVENT_TRACE as one of your personal
user settings? If this is the case, remove this parameter and the dump will no longer occur. The parameter is intended for test purposes only, for a report which evaluates
which events are published and which function modules are called as a
result of these events. However, depending on system settings, the
allocated memory may be too low and lead to the short dump.
(CRM_EVENT_TRACE is the report which can execute in SE38.)
Regards, Gerhard

Error while creating Campaign in CRM

Hi all,
When I am trying to create Campaign in CRM, system is throwing an error saying that "Can not get RFC destination for SEM".
We are not using SEM in our project.
Can anybody suggest me how to avoid/rectify this error?
points will be guaranteed.
Thanks in advance.
Regards,
Rahul.

Hi Rahul,
As long your are not activate/ use the key figure planning or budget,
you can use without SEM. There is setting in SPRO to set this.
Also in your CRM Campaign, you do not use scenario planning.
Hope this helps,
Gun.

Error during return order creation in CRM online

Hi all,
When I create return order via transaction CIC0 with reference to standard order ( B2C ) then some times system gives error after saving the return order. The text of the error message is very confusing , It says"
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
"Transmission log
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Document xxxxxxxxxx doesn't have document category but (Notification E V2 068)
Sales document xxxxxxxxxx was not changed (Notification E V4 219)"
I have tried to replicate this return order with all the available tools but during save this message is coming from R/3.
Regards,

I would suggest you to try to create a return order in R3 system (from where the error is coming) with the same parameters.
Usually that should give you the same error... Resolve the issue, then try to create order in CRM online. Now error should not be there.
Regards,
Kaushal

Creating consumers in CRM and R/3

Hi,
We are currently looking at mapping Consumers from CRM to R/3 and vice versa. We would like to be able to create consumers in CRM which replicate into R/3 and also create consumers in R/3 which replicate to CRM. However we understand that in R/3 only one 'Consumer' account group can exist. As default in R/3 the consumer account group is 0170. Is it true that the R/3 account group 0170 is classed as a consumer because the 'Consumer' checkbox is ticked?
We thought the following would work but it doesn't so any tips would be great.
In R/3 we have created a new account group Z170 which is a copy of
account group 0170.
In R/3 transaction PIDE we have mapped the following:
CRM > R/3: Classification: E = Consumer:Person to the R/3 account group
0170.
R/3 > CRM: Mapped the account group Z170 to Classification E=
Consumer:Person with external number range assigned.
We then go into R/3 to create a new BP in transaction XD01, we seelct
the account group Z170 but we noticed the screen fields does not
say 'Person'. Also after creating this BP we check in CRM that it has
been replicated, it has been replicated but the BP has been created
with roles 'Sold to Party' etc and not maintained in role 'Consumer'.
We have mapped the R/3 account group Z170 to classification E so we
assume it will be replicated into CRM as a consumer.
Cheers

Hi,
The key thing is we would like to create Consumers:Person in CRM and in R/3 and these must be replicated back into R/3 and CRM respectively.
Has anyone ever had to create Consumers:Persons in CRM and R/3? if so any help would be much appreciated. We understand that only one consumer accountr group can exists in R/3 so we wanted to know how we could go about this issue. We would like an internal number range for both CRM and R/3 when creating consumers.
Thanks
Cheers

Creating action in CRM sales transaction to trigger RFC in R/3?

Hello gurus
We wish to replicate our contracts from CRM to R/3 but since SAP is not supporting it, I heard that one option that we have is to enable actions in our CRM sales transactions, which when executed will trigger an RFC call to R/3 system and then create same transactioon there as well...
Could anyone please shed some light as to how this can be done?
Please advise.
Regards
Jai

Hello,
I should prefer using the ORDER_SAVE Badi, using a queued RFC to create the dat in the R/3 system.
Regards,
Fred

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

Error in phase creating java users during installation!!

Hi,
We are getting error at step "Creating java Users" while installing NW 2004s SR1 non unicode dual stack on HP Ux Pa Risc 64 bit with database Oracle 10g.
Erro logs of file /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/sapinst_dev.log are as:
==================================================================================================
ERROR      2011-07-21 13:20:37
           CJSlibModule::writeError_impl()
CJS-30197 . For more details see output of logfile:
TRACE      [iaxxejsbas.hpp:460]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR      2011-07-21 13:20:37 [iaxxgenimp.cpp:736]
           showDialog()
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
=================================================================================================
Also please note that we have already 1 instance (dual stack) on same host and that is running fine.
Could someone please assist us in proceeding further.
Regards
Joy Garg

Hi,
Issue gets resolved by extracting manualy from JAVA_DVD_DIR/J2EE_OSINDEP/J2EEINSTALL.SAR to SAPINST install directory using SAPCAR. The path of this install directory is:/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install as:
> pwd
/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/install
> SAPCAR -xvf /SW/NW_2004s_SR1Java_based_SW_Comp/J2EE_OSINDEP/J2EE-INST/J2EEINSTALL.SAR
Once we have extracted the J2EEINSTALL.SAR relaunch SAPINST again and the installation continue.
Regards
Joy garg
Once you will have extracted the J2EEINSTALL.SAR please launch SAPINST again and the installation will continue.

Time capsule won't back up - Unable to complete backup. An error occurred while creating the backup folder. Any ideas?

I have tried all the resets, the firmware is the latest version, the green light is on.
But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
Any ideas?

Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
Reset the TC again.. sorry.. !! You're welcome ... done.
Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
You need to open the network preferences to find out. Yep - that's good ...
****** I then reconnect the TC WAN to the router - is this right?
And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
Then open the airport utility and you should be able to setup the TC.
Do as little setup as possible and then run the TM backup and see how it goes.
I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
I named network RFG, named device RFGTC. RFG network shown as IP 192.168.0.72
Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link. All are effectively connected to the BT Homehub - is there a conflict there?
Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ...

Please help me to solve error: Split mapping created no messages

Hi Experts,
I am facing Split mapping created no messages when i run my scenario.
My Scenario is : Proxy to FILE.
I am triggering Proxy and based on one condition i am generating different Flat Files.
Now when i do this i am getting error :Split mapping created no messages in SXI_MONITOR.
When i check this in Message Mapping by taking data from SXI_MONI its working fine...
but when i trigger the data from RUNTIME WORKBENCH its throughing the error.
When i remove the NameSpaces <ns0:message>
and <ns0:messages1> its working fine.
How can i solve this issue.
Even though i removed Namespace in Message Type, i am getting the error.
I changed occurance of Target message to O..unbounded both in Message Mapping and Interface Mapping.
Its working fine in Message Mapping, problem occurs only when i run end-to-end scenario.
So please help me to solve this issue.

I think there might be mismatch between your name spaces.
may be this link might help you
Split mapping created no messages -Mluti Mapping
are you getting the same structure from your proxies whatever structure you have in your XI structure(sender) and NS should match.
but I dont have exp with proxies.
Sri

An error occured while creating the new dataset Could not get type informat

Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
My Path variable list the following:
C:\app\Administrator\product\11.1.0\client_1;
C:\app\Administrator\product\11.1.0\client_1\bin;
C:\oraclexe\app\oracle\product\10.2.0\server\bin;
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
C:\Program Files\Borland\BDS\4.0\Bin;
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
C:\PROGRA~1\Borland\vbroker\jre\Bin;
C:\PROGRA~1\Borland\vbroker\Bin;
C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
C:\WINDOWS\system32;C:\WINDOWS;
C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
C:\Program Files\java\jdk1.6.0_07\bin.
Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
Also noted that while deploying at client site I started gett'n this error:
"Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
Is it due to change in the production machine? Any help in this regard is greatly appreciated.

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

An error occurred while creating a Page Server subprocess.

I am using XI R2 SP5 on solaris.
When we try to view any report on demand or schedule any report that has a parameter, the following error comes back:
An error occurred while creating a Page Server subprocess.
I have tried restarting the services. I have tried creating a new page server. It behaves the same way. In other online forms, I've seen with this error message, people have talked about fixing it by installing SP2 or by uninstalling and reinstalling everything. We're at SP5, so we should have anything that was fixed at SP2. An uninstall and then reinstall would be a nightmare given the amount of use on this system.
Can anyone recommend anything at all? I'm about to have our unix admins reboot the server, but that is really nothing more than a stab in the dark. I saw someone else in an online posting claim that a reboot fixed the problem, but I've only seen that once.

checked this SAP Note?
1204013 - Error: "The Page Server is unable to create a child process" when viewing a Crystal report in InfoView on Solaris
Symptom
When trying to view a Crystal report in BusinessObjects XI Release 2 InfoView on Solaris, the following error message appears:
"The Page Server is unable to create a child process"
In the syslogs, you see the following error messages:
"An error occurred while creating a Page Server subprocess."
"The function PEOpenEngineEx failed. Reason: Report engine not opened."
"Internal error for dll procreport."
"Unable to load dll procreport."
"Internal Job Server error."
Cause
The following file in the MainWin registry has become corrupt:
bobje/enterprise115/solaris_sparc/crpe/mw/registry/core_data/servername/.mw/hklm_sunos.bin
This has become corrupt due to the web application server running under a different account than the BusinessObjects Enterprise applications.
Resolution
Restore the hklm_sunos.bin file using a backup of that file. The backup file must be from before the corruption occurred. Also ensure that your web application server and BusinessObjects Applications are running under the same user account.

A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
Rich

Hi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Error in replicate created BP in CRM 7.0 to ERP

Similar Messages

Maybe you are looking for