Creating consumers in CRM and R/3

Hi,
We are currently looking at mapping Consumers from CRM to R/3 and vice versa. We would like to be able to create consumers in CRM which replicate into R/3 and also create consumers in R/3 which replicate to CRM. However we understand that in R/3 only one 'Consumer' account group can exist. As default in R/3 the consumer account group is 0170. Is it true that the R/3 account group 0170 is classed as a consumer because the 'Consumer' checkbox is ticked?
We thought the following would work but it doesn't so any tips would be great.
In R/3 we have created a new account group Z170 which is a copy of
account group 0170.
In R/3 transaction PIDE we have mapped the following:
CRM > R/3: Classification: E = Consumer:Person to the R/3 account group
0170.
R/3 > CRM: Mapped the account group Z170 to Classification E=
Consumer:Person with external number range assigned.
We then go into R/3 to create a new BP in transaction XD01, we seelct
the account group Z170 but we noticed the screen fields does not
say 'Person'. Also after creating this BP we check in CRM that it has
been replicated, it has been replicated but the BP has been created
with roles 'Sold to Party' etc and not maintained in role 'Consumer'.
We have mapped the R/3 account group Z170 to classification E so we
assume it will be replicated into CRM as a consumer.
Cheers

Hi,
The key thing is we would like to create Consumers:Person in CRM and in R/3 and these must be replicated back into R/3 and CRM respectively.
Has anyone ever had to create Consumers:Persons in CRM and R/3? if so any help would be much appreciated. We understand that only one consumer accountr group can exists in R/3 so we wanted to know how we could go about this issue. We would like an internal number range for both CRM and R/3 when creating consumers.
Thanks
Cheers

Similar Messages

Create Material in CRM and also in ECC

Hello,
We have a non-SAP system (that is not being retired) where pre-production material numbers are generated for opportunity work.
(They are not initially ECC)
We are migrating our current opportunity system into CRM, and approach is the non-SAP system will start to send the pre-production materials into CRM (as products). To support opportunity creation.
However, when the materials do go into production, we then will set up the material numbers in ECC to support quotes/orders.
The material numer will be the same as when it was just pre-production status.
However, we are concerned with middleware replication...
What happens if we directly create a product in CRM, and then xx months later create the same product in ECC.
what happens when that material number tries to replicate to CRM and the number already exists?
Thanks
Chris

Hi Chris,
If you create the materials directly in CRM and then the materials with the same id in ECC, the products won't be in sync in the two systems and the transfers will start giving errors stating that the Product ID already exists and nothing will happen. Neither a new product will be created in CRM from ECC nor will it update the already existing once in CRM.
The reason being that the product created in CRM will be of the logical system identifier : CRM but when they will flow from ECC, they will be of the logical system identifier : ECC, hence the two won't link up.
/Hasan

Creating Activities in CRM using Word Templates and Web Services??

Hi,
This functionality can be achieved through Adobe Interactive Forms from what I have learnt through demos etc. We are checking the feasibility of using with Word Templates instead.
This thread has multiple questions:
We are trying to set up the activity creation as mentioned in the CRM70 system.
1) At this point, finished the retrieval of information from the CRM Activity into a Word Template using a READ Web Service. Subsequently synchronized this with outlook and can see the Word document in the outlook item. Not able to open the same in Outlook, since it comes over as a XML document type. "Cannot open as there is a problem with the contents. ">" expected, line so and so...is the message
2) I created a Web Service that writes as well into CRM and would like to use this from the Word Template to create the activity in CRM
2a) Can the word template be incorporated with buttons that can trigger creation in CRM, similar to Adobe "Execute" etc
2b) If yes, and If there are some custom fields that I add to the activity transaction, in the UI, can I populate these with input from the Word Template, as well
Regards,
Ashwin

Hell Wregs,
You can create the Product in CRM GUI,by using Transaction:COMMPR01,not mandatory to have WebUI..,
but b4 that you need to set up Product Hierarchy and Product category under which the Products can be created.
Use Transaction:COMM_HIERARCHY Transaction to do this.
Hope this helps
let me know if any further questions
Thanks & Regards
Arshad

How to create a connection between CRM and R73??

Hi, I have a problem. I am working with CRM and in my program I have to access to some tables in R/3 to get some data, I have created a RFC function to get those data (it is created in R/3). In CRM there is a report that use that function but when I use it I get a Dump. I think it is because the connection are not established. I know that I have to go to the SM59 but I don't know how and where I have to create, and I don't know which do the Destination parameter must be.
If anybody knows how to solve it...
Thanks in advance

Alejandro,
Please go through this link below
http://help.sap.com/saphelp_erp2005/helpdata/en/89/45aad99715462abdf09ec503e151e7/frameset.htm

Portal 7.0 and CRM 5.0 Create a new Role and enabling Quick Create.

Hi Experts,
In our Portal Scenario, we need to create a new Role and to customize it with some iviews(CRM BSP iviews).
The role was created and it works fine; in fact in the navigation it is possible to navigate in these BSP application:
1)Account
2)Products
3)Activities
My question is the following: I see that in the standard role com.sap.pct.crm.salesmanager (contained in the Business Package for my SAP CRM 5.0) it is possible to see in the portal desktop the functionality "Quick Create", how it is possible to enable the "Quick Create"??
Kind Regards.
Eugenio

Hi Eugenio,
Did you find how to do that? I am facing the same problem.
Regards,
Mauricio

Can't create consumers CRM006

Hello,
I'm working with CRM 7.0. I can create Private Accounts but I can't select Role CRM006.
It doesn't appear in the Roles List Assigment Block. I review the code of that field through Component Workbench and It has code to delete all CRM006 based Roles.
So my question is... How cann I create Consumers in SAP CRM 7.0?
Am I missing any customizing?
I notice I can add this role to Contact Persons but I can't add it to Individual Accounts. Can you explain this behavior?
Best Regards
JM
Edited by: urjose on Nov 21, 2009 2:57 AM

Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents of the User/Home/Library/Caches/com.apple.iWeb folder
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks or Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:

Error in replicate created BP in CRM 7.0 to ERP

Hi you all.
When I create a new BP in CRM, and go to SMW01 the BDOC gives un error, the message is that I didn't fill all required fields.
I've check and the account group that should recieve the BP in ERP don't have in obrigatory fields.
The strange is that when I did the initial load ERP->CRM every thing went fine, and also the delta changes went ok. My problem is only in the creation of new BP in CRM, that should be replicated to ERP.
Can anybody help with some clues?
Thanks

Hi Rui,
For me the best way to identify the field(s) that are causing the trouble is to debug the creation of the BP, in the ERP system.
Maybe there you'll find the missing information you need.
If you're willing to give a try, when you create a business partner in CRM the function CRM_UPLOAD_AFTER_MAP_HANDLER calls a remote ERP function called CRM_UPLOAD_TRIGGER.
This function will call another functions that are configured in the system (I think is table CRM_BUPA_CALL_FU). One of them is PI_BP_PROXY_BAPI_CUSTOMER that will start gathering the information and will create the customer in include LVV02F3J.
For me, the best spot to put the break-point is in include LVV02F3J, after the CALL TRANSACTION statement. The error messages will be in T_BDCMSGCOLL parameter, and there maybe you'll find the help you need to find the problem.
Kind regards,
Garcia

Organization announcements Using CRM and SAP portal

Dear Gurus,
I am trying to build functionality for an organization to do their announcements using CRM 7.0, Once the announcement is published it should be visible on the SAP Portal. I am planning to do like this:
1) Create a campaign using mail form (Announcement content) and target group
2) Select the communication method as e-mail and I have done settings in SPRO to create the activity for an outgoing mail
3) Release the campaign and execute the campaign
4) Upon execution the CRM system will create the activity for an outgoing email (announcement)
4) Create an iView in portal
5) Pull the activities created on CRM and display on the portal iView
My questions are:
1) Is there any standard iView to do this
2) Is there any other standard functionality available to do this announcement using CRM and Portal
3) What are the lining table between Campaign activity and mail forms (e-mail content for announcement) - When I go activity search on CRM WEB UI I can see these activities and also I can see these activities on CRMD_orderadm_h, but unable to get the link tables between this activity and outgoing mail forms.
Thank you in advance and appreciate your help.
Regards,
Reddy

Dear Gurus,
I am trying to build functionality for an organization to do their announcements using CRM 7.0, Once the announcement is published it should be visible on the SAP Portal. I am planning to do like this:
1) Create a campaign using mail form (Announcement content) and target group
2) Select the communication method as e-mail and I have done settings in SPRO to create the activity for an outgoing mail
3) Release the campaign and execute the campaign
4) Upon execution the CRM system will create the activity for an outgoing email (announcement)
4) Create an iView in portal
5) Pull the activities created on CRM and display on the portal iView
My questions are:
1) Is there any standard iView to do this
2) Is there any other standard functionality available to do this announcement using CRM and Portal
3) What are the lining table between Campaign activity and mail forms (e-mail content for announcement) - When I go activity search on CRM WEB UI I can see these activities and also I can see these activities on CRMD_orderadm_h, but unable to get the link tables between this activity and outgoing mail forms.
Thank you in advance and appreciate your help.
Regards,
Reddy

Number Range issues with sales orders in CRM and R/3

Hi,
We are currently using CRM4.0. I have sales orders created in R/3 and they are replicated into CRM. These sales orders can only be created in R/3. I have given them a number range of 0000000001 and 0005899999, however we have reached the number 0005899999 so we increased the internal number range for the sales orders in R/3 to 0009499999, however we forgot to update the number range for the corresponding sales transaction type in CRM so we are getting the following error in CRM:
+Enter a business transaction number between 0000000001 and 0005899999
Message no. CRM_ORDERADM_H532
Diagnosis
You have attempted to enter a transaction number which is not allowed for the transaction type.
Procedure
Enter a number between &1 and &2. Make sure that you issue a number which has not already been issued.+
We have now updated the CRM number range to match that in R/3 to 0000000001 and 0009499999 but we are still getting the error above on our existing sales orders in CRM. I thought that increasing this number range it will remove the error but when I open sales orders in CRM the error is still there.
Is there any way to remove this error message? Any tips or advice would be much appreciated.
Please note we've already checked the post Re: Number Range Problem and note 427289.
Kind Regards
JoJo

Hi Sirisha,
The solution depends on the exact issue you are facing.
The CRM Sales Order is created OK, but you only see the error when you open the Sales Order?
If this is the case, then you can follow the steps below:
1. Find the Message ID and Message No for the error message
2. Use Program - CRM_MESSAGES_DELETE to delete error messages from the error producing Sales Orders.
Let me know if this is not the issue you are facing.
Regards,
Nelson

Deleting Sales Order in CRM and connected R/3 - Help needed

I have a sales order created from the E-commerce scenario in CRM and has reflected in the R/3 system also.
Now I want to delete thi sales order from the systems.
I had cancelled this sales order from the webshop and thus the status in shown as completed.
Now when I delete the order in the CRM system it doesnt allow me to do so, though I have the option to delete the sales order (I am authorised to do it).
The error it gives is: "An error has occured in the system LOGPROD100 while copying the document".
If I delete it from the R/3 system it says you cant delete an order created in the CRM system.
Please guide me for this ASAP.
I will be ery thankful to any one who does it.
Thanks
Message was edited by:
Naresh Deepchand

Hey Vijay Duvvada,
I hope you are already referred below sap note and which explains scope & how to do -
1084315 - Consulting: Information about the multiple backend scenario
1763516 - How-to: Basic Setup of MEP
As explained by Rohit Sharma data should be start flowing to multiple sites.
please let me know if it does help.
Regards,
Arjun

Link between Service Order / Confirmation in CRM and Purchase Order in ECC

Hi all,
Does anyone knows what the possible link is between a Service Order / Service Order Confirmation in CRM and a Purchase Order in ECC ? I heard that this could be found somewhere in the document flow of a Service Order ....
How do we get the Purchase Order number from ECC in the Document flow section of an Service Order in CRM ?
We need the PO number somehow to be able to create a Goods Received document in ECC from CRM.
BR,
Abjuh

Hello Abjuh,
As of CRM 4.0 (with Service Industry extensions), you can automatically create ECC Purchase Orders from a CRM service order.
It is possible to track the status of the individual service order items with the document flow.
Please refer to the SAP Help for more information.
http://help.sap.com/saphelp_crm70/helpdata/EN/46/8bae7e9e886160e10000000a1553f7/frameset.htm
Kind regards,
Kristoff.

Mutual Changes of sales document in CRM and ECC

HI
1.We have a scenario as we are creating orders in CRM, but want to change the same in ECC. Also whatever changes we do in ECC should flow back to CRM.
2.Similarly, if we create sales order in ECC, it should be changeable in CRM and the corresponsing changes flow back to ECC.
I came across following SAP notes for the same.
1.889051: Scenario A
2.642944:Interdependent changes
My question is What is the difference between Scenario A and Interdependent Changes?
Please help urgently.
Regards

Hi D J,
Check the below link.
Data Exchange CRM <--> ECC Sales transactions
Hope this helps.
Thanks.
Best Regards,
Arun Sankar.

Errors while creating customers in CRM 5.0

when i create a new customer in CRM and check SMW01, the bdoc is failed for that customer and I get an error saying "No batch input data for screen SAPLV02Z 0100"
any idea on why this is coming?
Long text: The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
regards
RH

Hi RH,
Again I am mentioning the steps to find what batch data is missing in the batch input screen.
In transaction SMQS deregistor your R/3 system by pressing the button "Deregistration" then create a BP in CRM and save the data. Come back to the transaction SMQS again select your R/3 system and press the button QRFC monitor. Here you will find the queue related to your. Double click on it twice and then press the button Debug LUV. You will reach to the R/3 system ( make sure that the RFC user is dialog user in R/3 system).
but the break point at the statement " call transaction" and press F8. Here you change the value of mode from "N" to "A" in debugger and then press F8 again. by doing this you will get the batch input screen. Just keep on pressing enter and the system will fill the values. Here you will find what is the required entry missing.
You have to debug the R/3 Inbound to find what batch input data is missing.
Reward points if my post helps!!
Best regards,
Vikash.

Need to transfer field KLABC (ABC Classification) between CRM and R/3

Hello Group,
We plan to make the R/3 field KLABC (ABC Classification) of a customer (R/3 Table KNVV, Attribute KLABC) available in SAP CRM under Customer's sales area data. It should also be maintainable in SAP CRM.
After some analysis we found out, that this field also exists in SAP CRM (Table SMOKNVV, Attribute KLABC) but it is not replicated between CRM and R/3 (and vice versa). Also this field is not displayed in SAP GUI as well as not in the PCUI.
Now we are analyzing the two options:
1) Make KLABC from table SMOKNVV available in SAP CRM (and PCUI) for maintenance and extend the Middleware to enable the replication of KLABC between CRM and R/3
2) Extend the customers sales area data in CRM (PCUI) by a new attribute ZKLABC and extend the Middleware to enable replication between R/3 KLABC and the newly created ABC attribute in CRM
We have the following questions:
- What would be the better & easier approach ? Any recommendation or comment is highly appreciated.
- If we choose option 2, to what extend would the SAP CRM Easy Enhancement Workbench (EEWB) support this development (Is it possible to extend the business partners sales area data with EEWB ? Does the EEWB also extend BDocs if you add new fields to Business Partner tables ?)
Background Information:
We have SAP CRM 4.0 SP8, R/3 4.7 and SAP Enterprise Portal 6.0
Thanks a lot for help,
Erik

Hello Frédéric,
no, I do not have the middleware enhancement guide. Do you have it electronically and could send it to me erikmueller (at) gmx.de ?
In CRM would make the field KLABC from table SMOKNVV available in PCUI? Or would you use the Easy Enhancement Workbench to introduce a new field?
Either way I the middleware would need to be enhanced, but I would like to understand what is easier in CRM to have the field available in PCUI.
Thanks for the info.
Regards,
Erik

Integrating BP in CRM and R/3

Hello Friends,
I have a Customer created in R/3 with BP number 100. I have the same customer created manually in CRM system as BP number 100.
Now I do my middleware settings and do an initial download from R/3 to CRM. I should get an error that BP 100 already exists. Now if I activate my delta will the change in BP in R/3 get reflected in BP in CRM? As there is no GUID logic in R/3 and in KNA1 table the customer is solely identified with it's number will the changes be reflected in CRM?
If possible what is the difference between:
1. replicate BP Master using middleware
2. BP created manually and then middleware settings done and delta download activated
Regards,
Deba.

Hi Deba,
The mapping customer no. <-> BP Guid is stored in R/3 table CRMKUNNR and in CRM in table CRMM_BUT_CUSTNO. And the assignment between BP no. and BP guid in table BUT000 (in CRM, of course).
Also there is a transaction, /nCRMM_BUPA_MAP where data is retrieved from both tables BUT00 and CRMM_BUT_CUSTNO. to execute it, just enter any of the fields, e.g. R/3 Customer no. 1000 and press enter; you will get the BP guid and BP number. Or you can enter the BP no. instead, and you will get the BP guid and the customer no.
Hope that helps,
patricia

Creating consumers in CRM and R/3

Similar Messages

Maybe you are looking for