Error in running Swing on solaris m/c
I am trying to run a Swing application on solaris machine using java1.2.2
I am getting following error:
Font specified in font.properties not found [-b&h-lucida sans-medium-r-normal-sans-*-%d-*-*-p-*-iso8859-1]
Font specified in font.properties not found [-urw-itc zapfdingbats-medium-r-normal--*-%d-*-*-p-*-sun-fontspecific]
Exception occurred during event dispatching:
java.lang.InternalError: Unsupported 16-bit depth
at sun.awt.motif.X11Graphics.X11LockViewResources(Native Method)
at sun.awt.motif.X11Graphics.lock(X11Graphics.java:840)
at sun.java2d.loops.LockableRaster.<init>(Compiled Code)
at sun.java2d.loops.RasterOutputManager$RenderImageCachedState.getDstLR(RasterOutputManager.java:361)
at sun.java2d.loops.RasterOutputManager.renderImage(RasterOutputManager.java:472)
at sun.java2d.SunGraphics2D.renderingPipeImage(Compiled Code)
at sun.java2d.SunGraphics2D.drawImage(SunGraphics2D.java:1626)
at sun.awt.motif.X11Graphics.drawImage(X11Graphics.java:584)
at javax.swing.JComponent.paint(Compiled Code)
at java.awt.Container.paint(Compiled Code)
at javax.swing.JFrame.update(JFrame.java:260)
at sun.awt.motif.MComponentPeer.handleEvent(MComponentPeer.java:316)
at java.awt.Component.dispatchEventImpl(Component.java:2444)
at java.awt.Container.dispatchEventImpl(Container.java:1053)
at java.awt.Window.dispatchEventImpl(Window.java:755)
at java.awt.Component.dispatchEvent(Compiled Code)
at java.awt.EventQueue.dispatchEvent(Compiled Code)
at java.awt.EventDispatchThread.pumpOneEvent(Compiled Code)
at java.awt.EventDispatchThread.pumpEvents(Compiled Code)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:76)
Exception occurred during event dispatching:
java.lang.InternalError: Unsupported 16-bit depth
at sun.awt.motif.X11Graphics.X11LockViewResources(Native Method)
at sun.awt.motif.X11Graphics.lock(X11Graphics.java:840)
at sun.java2d.loops.LockableRaster.<init>(Compiled Code)
at sun.java2d.loops.RasterOutputManager$RenderImageCachedState.getDstLR(RasterOutputManager.java:361)
at sun.java2d.loops.RasterOutputManager.renderImage(RasterOutputManager.java:472)
at sun.java2d.SunGraphics2D.renderingPipeImage(Compiled Code)
at sun.java2d.SunGraphics2D.drawImage(SunGraphics2D.java:1626)
at sun.awt.motif.X11Graphics.drawImage(X11Graphics.java:584)
at javax.swing.JComponent.paintWithBuffer(Compiled Code)
at javax.swing.JComponent._paintImmediately(Compiled Code)
at javax.swing.JComponent.paintImmediately(Compiled Code)
at javax.swing.RepaintManager.paintDirtyRegions(Compiled Code)
at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:192)
at javax.swing.SystemEventQueueUtilities.processRunnableEvent(SystemEventQueueUtilities.java:392)
at javax.swing.SystemEventQueueUtilities.access$0(SystemEventQueueUtilities.java:388)
at javax.swing.SystemEventQueueUtilities$RunnableTarget.processEvent(SystemEventQueueUtilities.java:429)
at java.awt.Component.dispatchEventImpl(Compiled Code)
at java.awt.Component.dispatchEvent(Compiled Code)
at java.awt.EventQueue.dispatchEvent(Compiled Code)
at java.awt.EventDispatchThread.pumpOneEvent(Compiled Code)
at java.awt.EventDispatchThread.pumpEvents(Compiled Code)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:76)
Exception occurred during event dispatching:
java.lang.InternalError: Unsupported 16-bit depth
at sun.awt.motif.X11Graphics.X11LockViewResources(Native Method)
at sun.awt.motif.X11Graphics.lock(X11Graphics.java:840)
at sun.java2d.loops.LockableRaster.<init>(Compiled Code)
at sun.java2d.loops.RasterOutputManager$RenderImageCachedState.getDstLR(RasterOutputManager.java:361)
at sun.java2d.loops.RasterOutputManager.renderImage(RasterOutputManager.java:472)
at sun.java2d.SunGraphics2D.renderingPipeImage(Compiled Code)
at sun.java2d.SunGraphics2D.drawImage(SunGraphics2D.java:1626)
at sun.awt.motif.X11Graphics.drawImage(X11Graphics.java:584)
at javax.swing.JComponent.paint(Compiled Code)
at java.awt.Container.paint(Compiled Code)
at javax.swing.JFrame.update(JFrame.java:260)
at sun.awt.motif.MComponentPeer.handleEvent(MComponentPeer.java:316)
at java.awt.Component.dispatchEventImpl(Compiled Code)
at java.awt.Container.dispatchEventImpl(Container.java:1053)
at java.awt.Window.dispatchEventImpl(Compiled Code)
at java.awt.Component.dispatchEvent(Compiled Code)
at java.awt.EventQueue.dispatchEvent(Compiled Code)
at java.awt.EventDispatchThread.pumpOneEvent(Compiled Code)
at java.awt.EventDispatchThread.pumpEvents(Compiled Code)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:76)
What is the problem
plz help
TIA
Mansi
You already asked about this, almost two weeks earlier.
Memory fault error while executing Pro*C executables..
and
Pro*C compilation error after database upgrade to 11g
Similar Messages
-
Error while running Swing program on FreeBSD
Hi,
I am trying to run simple swing program "helloworld"
but while executing it gives following error on FreeBSD
Exception in thread "main" java.lang.UnsatisfiedLinkError:
/usr/local/linux-sun-jdk1.4.2/jre/lib/i386/libawt.so: libXp.so.6:
cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1560)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1477)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:834)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(NativeLibLoader.java:38)
at sun.awt.DebugHelper.<clinit>(DebugHelper.java:29)
at java.awt.EventQueue.<clinit>(EventQueue.java:80)
at javax.swing.SwingUtilities.invokeLater(SwingUtilities.java:1170)
at JPanels.main(JPanels.java:29)
Should i install XFree86-libs package on FreeBsd
configuration
FreeBSD 4.10-BETA (GENERIC)
I am using following packages
linux-sun-jdk-1.4.2.04 Sun Java Development Kit 1.4 for Linux
linux_base-8-8.0_4 Base set of packages needed in Linux mode (only for i386)
linux_devtools-8.0_1 Packages needed for doing development in Linux mode
libtool-1.3.5_1 Generic shared library support script
gmake-3.80_1 GNU version of 'make' utility
automake-1.4.5_9 GNU Standards-compliant Makefile generator (legacy version
GCC 2.95.4
gdb 4.18
ld 2.12.1 supported emulation elf_i386
regards
Man479This is not really a Swing question. You should install the library which satisfies the lookup of libXp.so.6 .
I quess the jre for this platform is compiled against this version. Looks to me like some X related library, maybe google can resolve a solution/package to install?
Greetz -
Cannot run loadjava on Solaris 10 64-bit server - wrong ELF class error
We are running into a problem when trying to run loadjava on a 10.2.0.3 database running on a Solaris 10 64-bit server.
loadjava -user xxxxx/xxxxx -verbose -resolve -force my.jar
creating : resource pea.properties
loading : resource pea.properties
ld.so.1: oracle: fatal: /var/db/10.2.0/lib32/libskgxp10.so: wrong ELF class: ELFCLASS32
The LD_LIBRARY_PATH does not have the lib32 directory on it, it has /var/db/10.2.0/lib instead.
Any idea on what to do?Hi,
Correct. The note specify general recommendations for setting the environment. The utility loadjava is not an exception.
Regards, -
Custom tag error in running OJSP 1.1 on iAS Solaris
I got an error in running the customtag demo that comes with iAS. Any idea?
Request URI:/demo/customtag/exampletag.jsp
Exception:
oracle.jsp.parse.JspParseException: Line # 2, <%@ taglib prefix="foo" uri="/WEB-INF/exampletag.tld" %> Error: Unable to load taghandler class:
/WEB-INF/exampletag.tld
nullI had this problem, got jdk reinstalled and the error was gone.
-
Error while running a customize report in oracle ebs
Hi ..
can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
XXIFMS: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Current system time is 03-JUN-2011 11:09:24
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DATE_FROM='2010/04/01 00:00:00'
P_DATE_TO='2011/06/03 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
stat_low = 9
stat_high = 0
emsg:was terminated by signal 9
ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 9
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JUN-2011 11:09:24Please post the details of the application release, database version and OS.
Is the issue with this specific concurrent program?
Can you find any errors in the CM/OPP log files?
Please see if these docs help.
On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
Thanks,
Hussein -
Error while running BIP report, in one of our ST environments
we are getting this exception while running one of our BIP report(RTF template).
the same code is working in the other ST environments
NOTE: we observed some special cases
if the report contain any Graph(chart) then this error is coming,
with the plain report (means only text), we observe it working fine.
could any one help, for debugging this issue
we found this log in EM console.
oracle.xdo.XDOException: java.lang.reflect.InvocationTargetException[[
at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1205)
at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:276)
at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1118)
at oracle.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:124)
at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:434)
at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:93)
at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1059)
at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:624)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:473)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:445)
at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:265)
at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:297)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:277)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:64)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:917)
at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:609)
at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:327)
at oracle.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:187)
at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1181)
at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:276)
at oracle.xdo.template.FOProcessor.createFO(FOProcessor.java:1974)
at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1118)
at oracle.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:124)
at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:434)
at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:93)
at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1059)
at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:624)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:473)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:445)
at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:265)
at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:296)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:276)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
... 1 more
Caused by: oracle.xdo11g.xpath.XPathException: Extension function error: Error invoking 'chart_svg':'java.lang.NoClassDefFoundError: oracle/dss/graph/TickLabelCallback'
at oracle.xdo11g.xslt.XSLStylesheet.flushErrors(XSLStylesheet.java:1850)
at oracle.xdo11g.xslt.XSLStylesheet.execute(XSLStylesheet.java:616)
at oracle.xdo11g.xslt.XSLStylesheet.execute(XSLStylesheet.java:551)
at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:345)
at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:194)
at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:230)
at oracle.xdo11g.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:124)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:920)
at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:609)
at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:328)
at oracle.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:187)
at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1181)
at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:276)
at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1118)
at oracle.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:124)
at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:434)
at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:93)
at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1059)
at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:624)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:473)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:445)
at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:265)
at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:297)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:277)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:64)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
... 1 more
i observed some of the forums facing same issue but no use.
BI Beans chart - 'chart_svg' error after migration to Solaris 10
Re: Error while running displaying Charts
Could not initialize class sun.awt.X11GraphicsEnvironment
Edited by: 852973 on Dec 2, 2011 3:31 AM
Edited by: 852973 on Dec 2, 2011 3:33 AMYou might want to repost this in the Reports forum here on OTN to get a Reports Guru to help out with this.
Here's the URL for the Reports Forum: Reports
Thanks,
Rob -
We are doing EBS R12.1.1 with 11gR2 database OS platform migration from Solaris Sparc 10(64 bit) to RHEL 5.6 (64 bit),
we are following Oracle documents :-
Export/import process for R12 using 11gR1 or 11gR2 [ID 741818.1]
Application Tier Platform Migration with Oracle E-Business Suite Release 12 [ID 438086.1]
We are facing issue during Application Tier Platform Migration for following step :-
Section 2: Migration Tasks >> 7.Run AutoConfig setup phase on the Target System
Executing script in InstantiateFile:
/u01/app/applmgr/inst/apps/PRD_sebs01/admin/install/adgenjky.sh
script returned:
adgenjky.sh started at Thu Aug 23 04:31:35 PDT 2012
Creating the key
Error while creating keys
Error while running keytool
adgenjky.sh finished at Thu Aug 23 04:31:36 PDT 2012
adgenjky.sh exiting with status 1
Log file is located at : /u01/app/applmgr/inst/apps/PRD_sebs01/admin/log/PRD_sebs01jkey.log
ERRORCODE = 1 ERRORCODE_END
.end std out.
/u01/app/applmgr/inst/apps/PRD_sebs01/admin/install/adgenjky.sh: line 192: createKeysCerUsingJava: command not found
.end err out.
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/app/applmgr/inst/apps/PRD_sebs01/admin/install
adgenjky.sh INSTE8_SETUP 1
AutoConfig is exiting with status 1
AutoConfig execution completed on Thu Aug 23 04:31:50 2012
Time taken for AutoConfig execution to complete : 0 mins 36 secs/u01/app/applmgr/inst/apps/PRD_sebs01/admin/install/adgenjky.sh: line 192: createKeysCerUsingJava: command not foundHave you sourced the application env file before running AutoConfig?
Did you complete all the steps in ([ID 438086.1]), under "Verify Source and Target nodes software versions" section?
Thanks,
Hussein -
Error while running BDB tcl testsuite commands
Hi,
I build berkeley db (4.7.25) libraries with tcl test suite is enabled in the solaris 9 machine using below configuration
../dist/configure --enable-dynamic ${BUILD_TAG} enable-tcl with-tcl=/export/tcl8.5/lib enable-test enable-java -prefix ${BUILD_DIR}
I used tcl 8.5, jdk1.6.0_18 and gcc-3.4.6 for building libraries.Libraries are build successfully.
When I run tcl command "run_std" in the tcl prompt, test is completed with below error logs in ALL.OUT file.
==========================================================================
cat ALL.OUT | grep FAIL
FAIL: error message in .out file: ./TESTDIR/lock003.1.out:FAIL:14:53:06 (00:00:01) number of other locks on 5: expected 0, got 1
FAIL: error message in .out file: ./TESTDIR/lock003.1.out:FAIL:14:53:06 (00:00:00) ../dist/../test/lockscript.tcl run: FAIL:14:53:06 (00:00:01) number of other locks on 5: expected 0, got 1: pid 28332: expected 0, got 1
FAIL: error message in .out file: ./TESTDIR/lock003.1.out:FAIL:18:24:50 (00:00:00) number of other locks on 44: expected 0, got 1
FAIL: error message in .out file: ./TESTDIR/lock003.1.out:FAIL:18:24:50 (00:00:00) ../dist/../test/lockscript.tcl run: FAIL:18:24:50 (00:00:00) number of other locks on 44: expected 0, got 1: pid 28378: expected 0, got 1
FAIL:03:09:45 (00:00:42) db_dump/db_load(./TESTDIR/primary007.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:09:45 (00:00:00) Dump/load of ./TESTDIR/primary007.db failed.
FAIL:03:09:45 (00:00:00) db_dump/db_load(./TESTDIR/secondary007.0.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:09:45 (00:00:00) Dump/load of ./TESTDIR/secondary007.0.db failed.
FAIL:03:09:45 (00:00:00) db_dump/db_load(./TESTDIR/secondary007.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:09:45 (00:00:00) Dump/load of ./TESTDIR/secondary007.1.db failed.
FAIL:03:10:31 (00:00:46) db_dump/db_load(./TESTDIR/primary008.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:10:31 (00:00:00) Dump/load of ./TESTDIR/primary008.db failed.
FAIL:03:10:31 (00:00:00) db_dump/db_load(./TESTDIR/secondary008.0.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:10:31 (00:00:00) Dump/load of ./TESTDIR/secondary008.0.db failed.
FAIL:03:10:31 (00:00:00) db_dump/db_load(./TESTDIR/secondary008.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:10:31 (00:00:00) Dump/load of ./TESTDIR/secondary008.1.db failed.
FAIL:03:12:06 (00:01:35) db_dump/db_load(./TESTDIR/primary001.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:06 (00:00:00) Dump/load of ./TESTDIR/primary001.db failed.
FAIL:03:12:06 (00:00:00) db_dump/db_load(./TESTDIR/secondary001.0.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:06 (00:00:00) Dump/load of ./TESTDIR/secondary001.0.db failed.
FAIL:03:12:06 (00:00:00) db_dump/db_load(./TESTDIR/secondary001.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:06 (00:00:00) Dump/load of ./TESTDIR/secondary001.1.db failed.
FAIL:03:12:34 (00:00:28) db_dump/db_load(./TESTDIR/primary002.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:34 (00:00:00) Dump/load of ./TESTDIR/primary002.db failed.
FAIL:03:12:34 (00:00:00) db_dump/db_load(./TESTDIR/secondary002.0.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:34 (00:00:00) Dump/load of ./TESTDIR/secondary002.0.db failed.
FAIL:03:12:34 (00:00:00) db_dump/db_load(./TESTDIR/secondary002.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:34 (00:00:00) Dump/load of ./TESTDIR/secondary002.1.db failed.
FAIL:03:12:47 (00:00:00) db_dump/db_load(./TESTDIR/primary006.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:47 (00:00:00) Dump/load of ./TESTDIR/primary006.db failed.
FAIL:03:12:47 (00:00:00) db_dump/db_load(./TESTDIR/secondary006.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:47 (00:00:00) Dump/load of ./TESTDIR/secondary006.1.db failed.
FAIL:03:12:47 (00:00:00) db_dump/db_load(./TESTDIR/secondary006.2.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:47 (00:00:00) Dump/load of ./TESTDIR/secondary006.2.db failed.
FAIL:03:13:10 (00:00:23) r: sindex: db open:too many open files
FAIL:06:38:47 (02:19:40) rep_process_message returned DB_NOTFOUND: No matching key/data pair found
====================================================================================
What could be the reason for the above errors while running the tcl testsuite ?
Is there any problem in berkeley db libraries that are build with above configuration?
Could you please clarify.
Thanks in advance.
Regards,
MadhuHi Sandra,
I have executed lock003 in the tclsh prompt and error occurred while executing this lock test.
========================================================
[exec] Lock003: Multi-process random lock test
[exec] Lock003.a: Create environment
[exec] Script watcher process 11571 launching lockscript.tcl process 11574.
[exec] Script watcher process 11570 launching lockscript.tcl process 11573.
[exec] Script watcher process 11572 launching lockscript.tcl process 11575.
[exec] Script watcher process 11576 launching lockscript.tcl process 11578.
[exec] Lock003.b: 5 independent processes now running
[exec] Script watcher process 11577 launching lockscript.tcl process 11597.
[exec] 06:35:39 (00:00:00) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:36:15 (00:00:36) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:36:51 (00:00:36) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:37:27 (00:00:36) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:38:03 (00:00:36) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:38:38 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:39:12 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:39:48 (00:00:36) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:40:22 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:40:57 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:41:32 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:42:07 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:42:41 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:48:46 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:49:20 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:49:55 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:50:29 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:51:04 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:51:39 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:52:13 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:52:48 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:53:23 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:53:58 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:54:32 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:55:07 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:55:41 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:56:16 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:56:51 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:57:25 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:58:00 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:58:34 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:59:09 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:59:46 (00:00:37) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:00:21 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:00:56 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:01:30 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:02:05 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:02:39 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:03:14 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] All processes have exited.
[exec] FAIL: error message in .out file: ./TESTDIR/lock003.0.out:FAIL:06:38:00 (00:00:00) number of other locks on 52: expected 0, got 1
[exec] FAIL: error message in .out file: ./TESTDIR/lock003.0.out:FAIL:06:38:00 (00:00:00) ../dist/../test/lockscript.tcl run: FAIL:06:38:00 (00:00:00) number of other locks on 52: expected 0, got 1: pid 11573: expected 0, got 1
===================================================================
Is this problem occur if berkeley db jars having any issues ?Why because, when berkeleydb jars (build without tcl test flags in the same environment) are used in application under high load,application is hanged because of berkeley db native api.
Sorry,I could not change ulimit value in my system because of lack of permissions.
Can you please explain what could be the reason for the above error and how to rectify it.
Thanks
Madhu -
Getting Error while running adlnkoh.sh
Hi Team,
Please help me out from below error, Appriciate for quick responce as it is production.
DB Version:11.2.0
O/S Version : Solaris 64 bit
Getting the blelow error while running adlnkoh.sh...
mv -f /hazeldb/db/tech_st/11.2.0/lib/libnmcfsga.so /hazeldb/db/tech_st/11.2.0/lib/libnmcfsga.so.0
mv /hazeldb/db/tech_st/11.2.0/sysman/lib/libnmcfsga.so /hazeldb/db/tech_st/11.2.0/lib/libnmcfsga.so
/usr/ccs/bin/make -f /hazeldb/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk relink_exe EXENAME=nmccollector
/usr/ccs/bin/ld -o /hazeldb/db/tech_st/11.2.0/sysman/lib/nmccollector -L/hazeldb/db/tech_st/11.2.0/lib/ -L/hazeldb/db/tech_st/11.2.0/sysman/lib/ -dy /hazeldb/db/tech_st/11.2.0/lib/prod/lib/v9/crti.o /hazeldb/db/tech_st/11.2.0/lib/prod/lib/v9/crt1.o -L/opt/SUNWcluster/lib -R/opt/SUNWcluster/lib -L/opt/ORCLcluster/lib/ -R/opt/ORCLcluster/lib/ `cat /hazeldb/db/tech_st/11.2.0/lib/sysliblist` -R /opt/SUNWcluster/lib/sparcv9:/hazeldb/db/tech_st/11.2.0/lib:/opt/ORCLcluster/lib/ -Y P,:/opt/SUNWcluster/lib/sparcv9:/opt/ORCLcluster/lib/:/usr/ccs/lib/sparcv9:/usr/lib/sparcv9 -Qy -lc -laio -lm /hazeldb/db/tech_st/11.2.0/lib/prod/lib/v9/crtn.o /hazeldb/db/tech_st/11.2.0/sysman/lib/snmccolm.o /hazeldb/db/tech_st/11.2.0/sysman/lib/libnmccol.a /hazeldb/db/tech_st/11.2.0/sysman/lib/libnmcbuf.a /hazeldb/db/tech_st/11.2.0/lib/libclntsh.so /hazeldb/db/tech_st/11.2.0/rdbms/lib/libdsga11.a /hazeldb/db/tech_st/11.2.0/lib/libserver11.a `cat /hazeldb/db/tech_st/11.2.0/lib/sysliblist` -R/hazeldb/db/tech_st/11.2.0/lib -lm -L/hazeldb/db/tech_st/11.2.0/rdbms/lib
mv -f /hazeldb/db/tech_st/11.2.0/bin/nmccollector /hazeldb/db/tech_st/11.2.0/bin/nmccollector0
mv: cannot access /hazeldb/db/tech_st/11.2.0/bin/nmccollector
*** Error code 2 (ignored)
mv /hazeldb/db/tech_st/11.2.0/sysman/lib/nmccollector /hazeldb/db/tech_st/11.2.0/bin/
Enterprise Manager Direct Memory Access Collector relinked
Completed linking target collector on Sunday, February 6, 2011 9:16:57 PM GMT...
The value of IS_RAC:false
Error found while relinking
return code = .25.26.27.30.31.32.33.34.35.36.37.38.39.40.41.42.43.44.46.47.48.49.50.51.52Please help me out from below error, Appriciate for quick responce as it is production.For production issues, please log a SR.
Getting the blelow error while running adlnkoh.sh...Is this as part of installation, patching, upgrade .. or what exactly?
mv -f /hazeldb/db/tech_st/11.2.0/bin/nmccollector /hazeldb/db/tech_st/11.2.0/bin/nmccollector0
mv: cannot access /hazeldb/db/tech_st/11.2.0/bin/nmccollector
*** Error code 2 (ignored)Does nmccollector already exist? If yes, does oracle user have read/write permission on this file/directory to rename the file.
Thanks,
Hussein -
Getting error while running Perl adcfgclone.pl appsTier
hi ,
i m getting error while running Perl adcfgclone.pl appsTier
error:ksh: Perl: not found
i check for per and ksh
which perl
/usr/bin/perl
which ksh
/usr/bin/ksh
(my os out put for perl ,my os is SunOS testserver 5.10 Generic_137137-09 sun4u sparc SUNW,Ultra-250)
perl -V
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/5.00503
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/site_perl/5.005
/appl2/applmgr2/prodappl/au/11.5.0/perl
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
which i need to set in path
PATH=$PATH:/usr/local/bin:/usr/ccs/bin:/usr/sfw/bin (like this )
export PATH
please help me outhi ,
here is the out put
# pwd
/appl2/applmgr2/prodora/iAS/Apache/perl
# perl -V
Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
Platform:
osname=solaris, osvers=2.10, archname=sun4-solaris-64int
uname='sunos localhost 5.10 sun4u sparc SUNW,Ultra-2'
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xarch=v8 -D_TS_ERRNO',
optimize='-xO3 -xspace -xildoff',
cppflags=''
ccversion='Sun WorkShop', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =''
libpth=/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lc
perllibs=-lsocket -lnsl -ldl -lm -lc
libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-R /usr/perl5/5.8.4/lib/sun4-solaris-64int/CORE'
cccdlflags='-KPIC', lddlflags='-G'
Characteristics of this binary (from libperl):
Compile-time options: USE_64_BIT_INT USE_LARGE_FILES
Locally applied patches:
22667 The optree builder was looping when constructing the ops ...
22715 Upgrade to FileCache 1.04
22733 Missing copyright in the README.
22746 fix a coredump caused by rv2gv not fully converting a PV ...
22755 Fix 29149 - another UTF8 cache bug hit by substr.
22774 [perl #28938] split could leave an array without ...
22775 [perl #29127] scalar delete of empty slice returned garbage
22776 [perl #28986] perl -e "open m" crashes Perl
22777 add test for change #22776 ("open m" crashes Perl)
22778 add test for change #22746 ([perl #29102] Crash on assign ...
22781 [perl #29340] Bizarre copy of ARRAY make sure a pad op's ...
22796 [perl #29346] Double warning for int(undef) and abs(undef) ...
22818 BOM-marked and (BOMless) UTF-16 scripts not working
22823 [perl #29581] glob() misses a lot of matches
22827 Smoke [5.9.2] 22818 FAIL(F) MSWin32 WinXP/.Net SP1 (x86/1 cpu)
22830 [perl #29637] Thread creation time is hypersensitive
22831 improve hashing algorithm for ptr tables in perl_clone: ...
22839 [perl #29790] Optimization busted: '@a = "b", sort @a' ...
22850 [PATCH] 'perl -v' fails if local_patches contains code snippets
22852 TEST needs to ignore SCM files
22886 Pod::Find should ignore SCM files and dirs
22888 Remove redundant %SIG assignments from FileCache
23006 [perl #30509] use encoding and "eq" cause memory leak
23074 Segfault using HTML::Entities
23106 Numeric comparison operators mustn't compare addresses of ...
23320 [perl #30066] Memory leak in nested shared data structures ...
23321 [perl #31459] Bug in read()
27722 perlio.c breaks on Solaris/gcc when > 256 FDs are available
SPRINTF0 - fixes for sprintf formatting issues - CVE-2005-3962
6663288 Upgrade to CGI.pm 3.33
REGEXP0 - fix for UTF-8 recoding in regexps - CVE-2007-5116
Built under solaris
Compiled at Jul 31 2008 12:07:52
@INC:
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
Thanks &Regard -
ORA-06502 - Error when running "Ask The Expert 0.9"
Hi ,
I successfully installed "Ask the Expert" package with Apex 3.0 on Oracle 10g Database 10.2.0.1.0. No error ocurred during the import in my Apex environment.
Besides that, i'm having problems when i tried to run the "Aks the Expert". It always shows the following message errors:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Error Unable to write activity log.
I think it was a problem with APEX instalation, but i could run the Sample Application of Apex without any problem.
I opened an SR in Metalink, but to my surprise, the analist of support don't know what's wrong with the demo "Ask de Expert".
The debug function of the application show the following commands before the error ocurrs:
0.01:
0.01: S H O W: application="103" page="1" workspace="" request="" session="6648566035252817"
0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to -03:00
0.02: NLS: Language=en-us
0.02: Application 103, Authentication: CUSTOM2, Page Template: 667896385843019243
0.02: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.02: ...ok to reuse builder session for user:nobody
0.03: ...Application session: 6648566035252817, user=nobody
0.03: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.03: Session: Fetch session header information
0.03: ...Metadata: Fetch page attributes for application 103, page 1
0.03: Fetch session state from database
0.03: Branch point: BEFORE_HEADER
0.03: Fetch application meta data
0.04: Computation point: BEFORE_HEADER
0.04: ...Perform computation of item: P1_CLEAN_CRITERIA, type=FUNCTION_BODY
0.04: ...Performing function body computation
0.06: ...Session State: Save "P1_CLEAN_CRITERIA" - saving same value: ""
0.06: Processing point: BEFORE_HEADER
0.06: ...Process "Read and Write Activity Cookie": PLSQL (BEFORE_HEADER) declare l_cookie_id number; begin owa_util.mime_header('text/html', FALSE); -- ate_api.read_activity_cookie; l_cookie_id := ate_api.fetch_activity_cookie_val( 'COOKIE_ID' ); -- if l_cookie_id is null then l_cookie_id :=
Content-type: text/html; charset=ISO-8859-1 Set-Cookie: activity_ask_expert=1|2400346189796; expires=Wed, 01-Jan-2020 08:00:00 GMT; path=/;
0.06: Encountered unhandled exception in process type PLSQL
0.06: Show ERROR page...
0.06: Performing rollback...
Please, could any one help me to solve this problem ? Metalink couldn't help me diagnosing what's wrong.
Thanks,
Sergio CoutinhoHi,
I don´t know if it help the analisis, but i collect some informations about my environment:
1) HTML DB version
3.0.1
2) Database version
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
3) Database server operating system (as well, if 32-bit or 64-bit)
Solaris 5.9 - 64 bits
4) Database Parameters:
PARAMETER VALUE
NLS_CALENDAR GREGORIAN
NLS_CHARACTERSET WE8ISO8859P1
NLS_COMP BINARY
NLS_CURRENCY $
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_DUAL_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_LANGUAGE AMERICAN
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_NCHAR_CONV_EXCP FALSE
NLS_NUMERIC_CHARACTERS .,
NLS_RDBMS_VERSION 10.2.0.1.0
NLS_SORT BINARY
NLS_TERRITORY AMERICA
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
Could it explain why ASK THE EXPERT is running on hosted apex site and it´s
generating error when running in my environment?
Thanks for the help !
Sergio -
Urgent ! how to run swing from dos
hi
how should i run swing program through dos prompt.when found in i tried compiling from c:\jdk\bin i got an error "package javax.swing not import".
vijiwhat you willdo is this,
at the top of your code type the line.
import javax.swing.*;
//for event type the next line..
import javax.swing.event.*;
import java.awt.event.*;
I think this should solve your problem. -
Any known issue about running Swing application in WTS?
*{color:#0000ff}Is there any known issue about running Swing Application in Windows Terminal Server?{color}*
It is started using JWS from internet (I mean, it checks if there is an avaiable update and updates or just fun).
_*{color:#800000}+The problem is that just one machine can open the application at the same time+*_
_*{color}*_
*{color:#666699}Is there any config in java or jws to run properly several instances of the application (terminal clients)?{color}*
Edited by: Franzisk on Sep 24, 2007 6:16 PM876587 wrote:
... and that cause the other threads cannot access the JNI. The same application works fine on other Solaris 10 machines.
Different environments mean just that. So something could be causing it outside java.
Additionally if anything at all is different in the execution data, such as even a name having a different size, then it would change the execution path.
Which would cause a problem in the JNI code to manifest itself on only one box. Probably isn't a pointer bug but all sorts of odd behavior can result from that. -
Configure: error: cannot run C compiled programs.
Hi,
I am new to Solaris. I have installed Solaris 10 and compiled packages without any error.
I have tried to compile Wireshark 1.7.1 and it was exist indicating '/usr/include/sys/feature_tests.h no such file or directory'.
So I have download feature_tests.h file and uploaded it to the relevant location and run ./configure again.
Now I am not able to compile any package and it indicate error
'configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details'
I have attached portion of the config.log
configure:3739: checking whether the C compiler works
configure:3761: gcc conftest.c >&5
configure:3765: $? = 0
configure:3813: result: yes
configure:3816: checking for C compiler default output file name
configure:3818: result: a.out
configure:3824: checking for suffix of executables
configure:3831: gcc -o conftest conftest.c >&5
configure:3835: $? = 0
configure:3857: result:
configure:3879: checking whether we are cross compiling
configure:3887: gcc -o conftest conftest.c >&5
In file included from conftest.c:11:
/usr/include/stdio.h:21:31: sys/feature_tests.h: No such file or directory
In file included from /usr/include/stdio.h:66,
from conftest.c:11:
/usr/include/iso/stdio_iso.h:90: error: syntax error before "fpos_t"
/usr/include/iso/stdio_iso.h:208: error: syntax error before "fpos_t"
/usr/include/iso/stdio_iso.h:210: error: syntax error before '*' token
In file included from /usr/include/stdio.h:135,
from conftest.c:11:
/usr/include/iso/stdio_c99.h:54: error: conflicting types for '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:54: error: previous definition of '_RESTRICT_KYWD' was here
/usr/include/iso/stdio_c99.h:56: error: redefinition of parameter '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:56: error: previous definition of '_RESTRICT_KYWD' was here
/usr/include/iso/stdio_c99.h:68: error: conflicting types for '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:68: error: previous definition of '_RESTRICT_KYWD' was here
/usr/include/iso/stdio_c99.h:70: error: conflicting types for '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:70: error: previous definition of '_RESTRICT_KYWD' was here
configure:3891: $? = 1
configure:3898: ./conftest
./configure: line 3900: ./conftest: No such file or directory
configure:3902: $? = 127
configure:3909: error: in `/wireshark-1.6.7':
configure:3911: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details934802 wrote:
Hi,
I am new to Solaris. I have installed Solaris 10 and compiled packages without any error.
I have tried to compile Wireshark 1.7.1 and it was exist indicating '/usr/include/sys/feature_tests.h no such file or directory'.
So I have download feature_tests.h file and uploaded it to the relevant location and run ./configure again.
Now I am not able to compile any package and it indicate error Where did you get this file? -
PANIC: fatal region error detected; run recovery - How Can I resolve it?
PANIC: fatal region error detected; run recovery
Error loading files into container null.dbxml
Message: DB_RUNRECOVERY: Fatal error, run database recovery
com.sleepycat.db.RunRecoveryException: DB_RUNRECOVERY: Fatal error, run database recovery: DB_RUNRECOVERY: Fatal error, run database recovery
at com.sleepycat.db.internal.db_javaJNI.DbEnv_open(Native Method)
at com.sleepycat.db.internal.DbEnv.open(DbEnv.java:240)
at com.sleepycat.db.EnvironmentConfig.openEnvironment(EnvironmentConfig.java:714)
at com.sleepycat.db.Environment.<init>(Environment.java:30)
at dbxml.gettingStarted.CopyOfexampleLoadContainer.createEnv(CopyOfexampleLoadContainer.java:144)
at dbxml.gettingStarted.CopyOfexampleLoadContainer.loadXmlFiles(CopyOfexampleLoadContainer.java:157)
at dbxml.gettingStarted.CopyOfexampleLoadContainer.main(CopyOfexampleLoadContainer.java:78)
at dbxml.gettingStarted.Imagem.actionPerformed(Imagem.java:174)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1778)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)You will need to know about recovery. I suggest you read up on it in the Berkeley DB reference guide:
http://www.oracle.com/technology/documentation/berkeley-db/xml/ref/transapp/put.html
http://www.oracle.com/technology/documentation/berkeley-db/xml/ref/transapp/recovery.html
John
Maybe you are looking for
-
Inutilização de uma nfe com mensageria não sap
Prezados Colegas, Gostaria de solicitar uma preciosa ajuda de vocês. Estou em um projeto de implementação, utilizando a solução SAP para NF-e, porém com uma mensageria NÃO-SAP que o cliente já utiliza hoje. Preciso entender como funciona o seguinte c
-
My Ipod touch is recognized by itunes, but not by my computer!
My hard drive recently crashed, and I had to get a new one. I lost all my songs, so I am trying to transfer them to my new harddrive, but windows only recoginzes my ipod touch as a camera, so I can't get to my songs. Help?
-
Windows XP machine doesn't show up in finder
How can I change this, and then allow screen sharing (We have 3 other computers, which are macs, and they work fine together).
-
How to reinstall Lexmark driver?
I need help to reinstall the software for my Lexmark Z615 printer. Due to other problems on the MacBook, I had to wipe the hard drive and start over. When I did, I could not find the CD-ROM with the software for the printer. I am still looking for
-
No underline is visible in pivot view of a report.
Hi, I have report in which I have used GOURL. When I click on the result, underline is showing under the result in Table view unless underline is set for Effect in Column Properties->Style of the column. But for the same report, no under is showing f