Error in SAP installation in phase 19 of 34 - Import ABAP
Hi SAP Gurus,
Good day all, I'm facing problem when installing SAP ECC 6.0 EHP7 (IDES version). Its stucked in phase 19 of 34 Import ABAP.
Below are the error details:-
ECC Message Box
An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > Oracle > SAP Systems > Application Server ABAP > Standard System > Standard System( Last error reported by the step: Process call 'D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.). You can now:
Choose Retry
to repeat the current step.
Choose Log Files
to get more information about the error.
Stop the option and continue later.
Log files are written to C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP.
Below are the logs from R3load.exe:-
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20141006062234
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:31:32
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 4612
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: db_connect rc = 256
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: DbSlErrorMsg rc = 29
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20141006062234
Looking forward for your reply.
Regards,
Jay
-96-
Hi
I'm afraid you forget selecting the SSFS option during installation and it is the only connection method supported for kernel 7.40
It should be possible to fix this manually and perform all the step to connect using SSFS... but restarting your installation might be faster & easier.
1622837 - Secure connection of AS ABAP to Oracle via SSFS
As of SAP Kernel Release 7.40 (irrespective of the Oracle version), only the secure connection (secure connect) is supported via SSFS.
Regards
Similar Messages
-
Error in SAP Installation in phase 12 Create database
Hi gurus,
I´m stuck on sap installation main process.
I´m install SAP ERP 2005 SR2 (= ECC 6.0 SR2) with OS windows 2003 server X64 and the Database is Oracle 10.2.0.4 !
I´m facing with error in phase 12 of 44. That is in Create Database phase as you can see in following images:
Error --> http://img60.imageshack.us/img60/8488/errorinstallation12phas.jpg
Error Log --> http://img60.imageshack.us/img60/5725/errorinstallation12phas.png
I checked some log files, such sapinst.log and clsc.log and the css.log, following you can see them:
sapinst.log :
ERROR 2009-07-15 20:09:50
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-07-15 20:09:50
FCO-00011 The step runCatprocSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql was executed with status ERROR .
On path/directory D:oracleERP102logsaperpaioclient :
clsc.log :
Oracle Database 10g CRS Release 10.2.0.4.0 Production Copyright 1996, 2008 Oracle. All rights reserved.
2009-07-15 20:02:01.672: [2292]utgdv:1:could not open registry key SOFTWAREOracleocr os error The system could not find the environment option that was entered.
2009-07-15 20:02:01.672: [2292]proprinit: Could not open raw device
2009-07-15 20:02:01.672: [2292]a_init:7!: Backend init unsuccessful :
2009-07-15 20:02:01.672: [2292]clsssinit: error(33 ) in OCR initialization
2009-07-15 20:02:02.844: [2292]utgdv:1:could not open registry key SOFTWAREOracleocr os error The system could not find the environment option that was entered.
2009-07-15 20:02:02.844: [2292]proprinit: Could not open raw device
2009-07-15 20:02:02.844: [2292]a_init:7!: Backend init unsuccessful :
css.log :
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2009-07-14 22:01:19.831: [1748]utgdv:1:could not open registry key SOFTWAREOracleocr os error The system could not find the environment option that was entered.
Best regards,
João Dimas - PortugalHi uday kumar,
1: I install the DB release 10.2.0.1 through sapserver.cmd and next I install the patch 10.2.0.4 using setup.exe !!
2: The ora_sql_results.log have a big log ... I´m going put here the last entries of log: It´s possible to send you the log file of this using a personal message?! ...and so, in this way, you could see better the log file!!
PL/SQL procedure successfully completed.
SQL>
SQL> #Rem stop the job
SQL> BEGIN
2 BEGIN
3 -- call to stop the job
4 ORACLE_OCM.MGMT_CONFIG.stop_job;
5 EXCEPTION
6 WHEN OTHERS THEN
7 -- ignore any exception
8 null;
9 END;
10 END;
11 /
PL/SQL procedure successfully completed.
SQL>
SQL> #Rem submit the job and run now
SQL> execute ORACLE_OCM.MGMT_CONFIG.submit_job;
PL/SQL procedure successfully completed.
SQL> execute ORACLE_OCM.MGMT_CONFIG.run_now;
PL/SQL procedure successfully completed.
SQL>
SQL>
SQL> Rem ADD NEW PACKAGES/NEW POST CATPROC FIXED VIEWS ABOVE THIS BLOCK
SQL> -
SQL>
SQL> SET SERVEROUTPUT ON
SQL>
SQL> Rem Indicate CATPROC load complete and check validity
SQL> BEGIN
2 dbms_registry.update_schema_list('CATPROC',
3 dbms_registry.schema_list_t('SYSTEM', 'OUTLN', 'DBSNMP'));
4 dbms_registry.loaded('CATPROC');
5 dbms_registry_sys.validate_catproc;
6 dbms_registry_sys.validate_catalog;
7 END;
8 /
PL/SQL procedure successfully completed.
SQL>
SQL> SET SERVEROUTPUT OFF
SQL> exit;
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program D:oracleERP102/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2009-07-15, 20:09:50 SAPINST ORACLE stop logging
Best regards,
João Dimas - Portugal -
Hello gurus
I'm installing a Central Instance of SAP R3 4.7 Enterprise Edition, the central instance in one host and the database in another host. I'm getting the error below and the installation stops.
ERROR 2012-01-26 17:52:04
FKD-00034 Query returned more than one result.
ERROR 2012-01-26 17:52:04
FKD-00035 Query did not return a result. Select attribute WHERE WapsInstanceName = getContextParameter ('WapsInstanceName' ) AND WapsSystemName = getContextParameter ('WapsSystemName' ) , statement:
ERROR 2012-01-26 17:52:04
FKD-00029 Subselect for table t_SAPComponent_Waps_Instance_SHARED, column WapsExeDir with WHERE clause WHERE WapsInstanceName = getContextParameter ('WapsInstanceName' ) AND WapsSystemName = getContextParameter ('WapsSystemName' ) failed.
ERROR 2012-01-26 17:52:04
MUT-02010 Internal error: Access to key db failed. Original message: Subselect to table >t_SAPComponent_Waps_Instance_SHARED< column name >WapsExeDir< using where clause >WHERE WapsInstanceName = getContextParameter ('WapsInstanceName' ) AND WapsSystemName = getContextParameter ('WapsSystemName' ) < ends with an exception. ExceptionText :single select returns more than on row .
WARNING 2012-01-26 17:52:04
The step diPrepareDbEnvironment with step key SAPSYSTEM_CI|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseSystem|ind|ind|ora|ind|ind|0|DatabaseCommonParameters|ind|ind|ora|ind|ind|0|diPrepareDbEnvironment was executed with status ERROR.
WARNING 2012-01-26 17:54:09
An error occurred during the installation.
Do you have any ideia what could it be?
RegardsJuan
The installation guide informs to change the environment variable LD_LIBRARY_PATH and I changed as suggested in installation guide, but the error persists.
There are another environment variables besides LD_LIBRARY_PATH that I have to change?
VNCDESKTOP=xxx
HOSTNAME=xxx
TERM=xterm
SHELL=/bin/bash
HISTSIZE=1000
WINDOWID=6291495
XTERM_SHELL=/bin/bash
USER=root
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:.cmd=00;32:.exe=00;32:.com=00;32:.btm=00;32:.bat=00;32:.sh=00;32:.csh=00;32:.tar=00;31:.tgz=00;31:.arj=00;31:.taz=00;31:.lzh=00;31:.zip=00;31:.z=00;31:.Z=00;31:.gz=00;31:.bz2=00;31:.bz=00;31:.tz=00;31:.rpm=00;31:.cpio=00;31:.jpg=00;35:.gif=00;35:.bmp=00;35:.xbm=00;35:.xpm=00;35:.png=00;35:.tif=00;35:
LD_LIBRARY_PATH=/sapmnt/TRN/exe:/oracle/10.2.0.5.5/lib
PATH=/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/etc/opt/emcpower/bin:/root/bin:/usr/local/sbin:/usr/local/bin
MAIL=/var/spool/mail/root
PWD=/sapmnt/TRN/instdir/inst5
INPUTRC=/etc/inputrc
LANG=en_US.UTF-8
XTERM_VERSION=XTerm(215)
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
HOME=/root
SHLVL=4
LOGNAME=root
LESSOPEN=|/usr/bin/lesspipe.sh %s
DISPLAY=:1.0
ORACLE_HOME=/oracle/10.2.0.5.5
G_BROKEN_FILENAMES=1
_=/bin/env -
Error in SAP Installation , Dispatcher nto starting
Hi,
I am in the process of installaion of nW2004s in Ms SQL server .
When the Central instance is running , the sapinst could not restart the sap from sap management console.
When i tried to restart SAP from MMC the dispatcher gets stopped in 2 mins. Pls hlep
the folowing is the output of dev_disp file
Mon Mar 10 15:36:36 2008
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ****
***LOG Q00=> DpSapEnvInit, DPStart (01 3500) [dpxxdisp.c 1239]
* shared lib "dw_xml.dll" version 111 successfully loaded*
* shared lib "dw_xtc.dll" version 111 successfully loaded*
* shared lib "dw_stl.dll" version 111 successfully loaded*
* shared lib "dw_gui.dll" version 111 successfully loaded*
* shared lib "dw_mdm.dll" version 111 successfully loaded*
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Mon Mar 10 15:36:41 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds*
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >WDBSSAPBWD01_BWD_01 <
DpShMCreate: sizeof(wp_adm) 19248 (1480)
DpShMCreate: sizeof(tm_adm) 5584592 (27784)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F270050, size: 6275136)
DpShMCreate: allocated sys_adm at 000000000F270050
DpShMCreate: allocated wp_adm at 000000000F272150
DpShMCreate: allocated tm_adm_list at 000000000F276C80
DpShMCreate: allocated tm_adm at 000000000F276CE0
DpShMCreate: allocated wp_ca_adm at 000000000F7CA3B0
DpShMCreate: allocated appc_ca_adm at 000000000F7D0170
DpShMCreate: allocated comm_adm at 000000000F7D20B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F858D40
DpShMCreate: allocated gw_adm at 000000000F858DC0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F858DF0
DpShMCreate: allocated wall_adm at 000000000F858E00
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( WDBSSAPBWD01) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >WDBSSAPBWD01_BWD_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Mon Mar 10 15:37:21 2008
ERROR => W0 (pid 3864) died [dpxxdisp.c 14441]*
ERROR => W1 (pid 5556) died [dpxxdisp.c 14441]*
ERROR => W2 (pid 5388) died [dpxxdisp.c 14441]*
ERROR => W3 (pid 5568) died [dpxxdisp.c 14441]*
ERROR => W4 (pid 4200) died [dpxxdisp.c 14441]*
ERROR => W5 (pid 5520) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 5452) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2600) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 4220) died [dpxxdisp.c 14441]*
ERROR => W9 (pid 4212) died [dpxxdisp.c 14441]*
ERROR => W10 (pid 3628) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 4176) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 5652) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes*
DISPATCHER EMERGENCY SHUTDOWN ****
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=501
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 10 15:37:31 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Mar 10 19:37:31 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3864 Ended no 1 0 0
1 DIA 5556 Ended no 1 0 0
2 DIA 5388 Ended no 1 0 0
3 DIA 5568 Ended no 1 0 0
4 DIA 4200 Ended no 1 0 0
5 DIA 5520 Ended no 1 0 0
6 UPD 5452 Ended no 1 0 0
7 ENQ 2600 Ended no 1 0 0
8 BTC 4220 Ended no 1 0 0
9 BTC 4212 Ended no 1 0 0
10 BTC 3628 Ended no 1 0 0
11 SPO 4176 Ended no 1 0 0
12 UP2 5652 Ended no 1 0 0
Dispatcher Queue Statistics Mon Mar 10 19:37:31 2008
===========================
--------++++--+
| Typ | now | high | max | writes | reads |
--------++++--+
| NOWP | 0 | 2 | 2000 | 6 | 6 |
--------++++--+
| DIA | 5 | 5 | 2000 | 5 | 0 |
--------++++--+
| UPD | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| BTC | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| SPO | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Mon Mar 10 19:37:31 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Mar 10 19:37:31 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--+
| id | owner | pid | eyecatcher |
--------++--+
*| 0 | DISPATCHER | -1 | WPCAAD000 |*
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=501
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 10 15:37:36 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >WDBSSAPBWD01_BWD_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4208) (SOFT_KILL)
Stop icman
killing process (3768) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4208 HANDLE:468)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=501
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 10 15:37:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4208 HANDLE:468)
wait for end of icman
[DpProcDied] Process lives (PID:3768 HANDLE:476)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=501
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 10 15:37:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3768 HANDLE:476)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=501Hi Balaji,
check errors on dev_w0 and post the here.
Regards
Juan -
Error in SAP installation ECC 6.0 "HKEY_LOCAL_MACHINE does not exist"
Here is log can any body suggest
INFO 2009-02-21 10:17:02
Connection request to guiengine backend by host 192.168.16.249 .
INFO 2009-02-21 10:17:07
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.2.xml'.
INFO 2009-02-21 10:17:07
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.3.xml'.
INFO 2009-02-21 10:17:07
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.2.xml'.
INFO 2009-02-21 10:17:07
Execute step changeUserInstall of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:23
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\change.log.
INFO 2009-02-21 10:17:23
Output of change user /install is written to the logfile change.log.
WARNING 2009-02-21 10:17:23
Execution of the command "change user /install" finished with return code 1. Output:
Install mode does not apply to a Terminal server configured for remote administration.
INFO 2009-02-21 10:17:23
Execute step chgautInstdirPublicAllOS4 of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:42
Execute step done of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:42
Execute step checkParams of component |NW_Onehost|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:42
Execute step fillContextForSoftwareFeatures of component |NW_Onehost|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:43
Execute step loadUsageTypes of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Init|ind|ind|ind|ind|2|0.
INFO 2009-02-21 10:17:44
Execute step fillContextUsageTypes of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0.
INFO 2009-02-21 10:17:44
Execute step setAllPossible of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:45
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.1.xml'.
INFO 2009-02-21 10:17:45
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.2.xml'.
INFO 2009-02-21 10:17:45
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/jexclude.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/jexclude.1.xml'.
INFO 2009-02-21 10:17:45
Execute step determineScenarioParameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:45
Execute step prepareUsagesTableForUserInputXml of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:46
Execute step determinePossibleUsageTypesXml of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:47
Execute step prepareUsagesTableForUserInputDB of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:47
Execute step setDefaultsGuiValues of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:47
Execute step setDefaultsStackDetermined of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:47
Execute step chooseMandatory of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:48
Execute step makeABAPPartsImpossible of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:48
Execute step setDependencyRestrictions of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:17:49
Execute step prepareScenario of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
INFO 2009-02-21 10:17:49
Execute step fillUsagesTable of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
INFO 2009-02-21 10:17:50
Execute step selectUsages of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
INFO 2009-02-21 10:18:00
Execute step selectUsagesNetWeaver of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
INFO 2009-02-21 10:18:03
Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output:
#Sat Feb 21 10:18:03 GMT+05:30 2009
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_08
jre
bin
java.vm.version=1.4.2_08-b03
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) Client VM
file.encoding.pkg=sun.io
user.country=US
sun.os.patch.level=Service Pack 1
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
PROGRA1
SAPINS1
ERP
SYSTEM
ORA
CENTRAL
AS
java.runtime.version=1.4.2_08-b03
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_08
jre
lib
endorsed
os.arch=x86
java.io.tmpdir=C\:
DOCUME1
ADMINI1
LOCALS~1
Temp
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_08
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;D\:
oracle
product
10.2.0
db_1
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;%JAVA_HOME%/bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
Administrator
user.timezone=GMT+05\:30
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar
user.name=Administrator
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_08
jre
sun.arch.data.model=32
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_08
java.ext.dirs=C\:
j2sdk1.4.2_08
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_08
jre
lib
rt.jar;C\:
j2sdk1.4.2_08
jre
lib
i18n.jar;C\:
j2sdk1.4.2_08
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_08
jre
lib
jsse.jar;C\:
j2sdk1.4.2_08
jre
lib
jce.jar;C\:
j2sdk1.4.2_08
jre
lib
charsets.jar;C\:
j2sdk1.4.2_08
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=pentium i486 i386
INFO 2009-02-21 10:18:03
Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.1988.1235191614/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output:
CORRECT
INFO 2009-02-21 10:18:03
Found a valid JAVA_HOME directory C:\j2sdk1.4.2_08 with JDK version 1.4.2_08.
INFO 2009-02-21 10:18:03
Execute step getCD of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:18:03
Execute step verifyJavaHome of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:18:03
Execute step verifyPolicy of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:18:04
Execute step setNWOption of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2009-02-21 10:18:04
Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output:
#Sat Feb 21 10:18:04 GMT+05:30 2009
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=C\:
j2sdk1.4.2_08
jre
bin
java.vm.version=1.4.2_08-b03
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=;
java.vm.name=Java HotSpot(TM) Client VM
file.encoding.pkg=sun.io
user.country=US
sun.os.patch.level=Service Pack 1
java.vm.specification.name=Java Virtual Machine Specification
user.dir=C\:
PROGRA1
SAPINS1
ERP
SYSTEM
ORA
CENTRAL
AS
java.runtime.version=1.4.2_08-b03
java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs=C\:
j2sdk1.4.2_08
jre
lib
endorsed
os.arch=x86
java.io.tmpdir=C\:
DOCUME1
ADMINI1
LOCALS~1
Temp
line.separator=\r\n
java.vm.specification.vendor=Sun Microsystems Inc.
user.variant=
os.name=Windows 2003
sun.java2d.fontpath=
java.library.path=C\:
j2sdk1.4.2_08
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;D\:
oracle
product
10.2.0
db_1
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;%JAVA_HOME%/bin
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
os.version=5.2
user.home=C\:
Documents and Settings
Administrator
user.timezone=GMT+05\:30
java.awt.printerjob=sun.awt.windows.WPrinterJob
file.encoding=Cp1252
java.specification.version=1.4
java.class.path=C\:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar
user.name=Administrator
java.vm.specification.version=1.0
java.home=C\:
j2sdk1.4.2_08
jre
sun.arch.data.model=32
user.language=en
java.specification.vendor=Sun Microsystems Inc.
awt.toolkit=sun.awt.windows.WToolkit
java.vm.info=mixed mode
java.version=1.4.2_08
java.ext.dirs=C\:
j2sdk1.4.2_08
jre
lib
ext
sun.boot.class.path=C\:
j2sdk1.4.2_08
jre
lib
rt.jar;C\:
j2sdk1.4.2_08
jre
lib
i18n.jar;C\:
j2sdk1.4.2_08
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_08
jre
lib
jsse.jar;C\:
j2sdk1.4.2_08
jre
lib
jce.jar;C\:
j2sdk1.4.2_08
jre
lib
charsets.jar;C\:
j2sdk1.4.2_08
jre
classes
java.vendor=Sun Microsystems Inc.
file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeLittle
sun.cpu.endian=little
sun.cpu.isalist=pentium i486 i386
INFO 2009-02-21 10:18:04
Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath
finished with return code 0. Output:
CORRECT
INFO 2009-02-21 10:18:04
Found a valid JAVA_HOME directory C:\j2sdk1.4.2_08 with JDK version 1.4.2_08.
INFO 2009-02-21 10:18:04
Execute step collect of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
WARNING 2009-02-21 10:18:05
*Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (69), with parameter (SYSTEM\CurrentControlSet\Services\ltpsnr).*
*WARNING 2009-02-21 10:18:05
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.*
*ERROR 2009-02-21 10:18:05
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.*
ERROR 2009-02-21 10:18:05
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
INFO 2009-02-21 10:19:50
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
WARNING 2009-02-21 10:19:50
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (69), with parameter (SYSTEM\CurrentControlSet\Services\ltpsnr).
WARNING 2009-02-21 10:19:50
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.
ERROR 2009-02-21 10:19:50
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.
ERROR 2009-02-21 10:19:50
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
INFO 2009-02-21 10:21:43
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
please provide me the solution .....Hello,
this error is really strange. At this step, sapinst scans all keys that are located under
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
in order to find existing SAP services and to retrieve their parameters. Since this usually happens in a sorted way, many other keys must have already been successfully retrieved.
My guess is now that there is a problem that is related just to the service that was processed in the current iteration: ltpsnr
-> call regedit and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
-> locate the ltpsnr entry, is it actually there? If yes:
-> right click on the entry and chose 'permissions'
-> are the permissions here actually different compared to the other entries?
Best Regards,
Michael -
SAP NetWeaver 7.01 SR1 SP3 ABAP Trial Version ERROR in importing ABAP phase
Hi all,
I am trying to instal this trial version on my computer. I have tried with Windows XP Pro SP2 and with Windows XP Pro SP3 and I get the same error, in both cases, in the phase 18 wich is: Importing ABAP.
These are the errors I get:
Import Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
Import Monitor jobs: running 2, waiting 26, completed 0, failed 0, total 28.
Import Monitor jobs: running 3, waiting 25, completed 0, failed 0, total 28.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 2, waiting 25, completed 0, failed 1, total 28.
Loading of 'REPOSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 25, completed 0, failed 2, total 28.
Loading of 'SAPSSEXC_1' import package: ERROR
Import Monitor jobs: running 0, waiting 25, completed 0, failed 3, total 28.
Import Monitor jobs: running 1, waiting 24, completed 0, failed 3, total 28.
Import Monitor jobs: running 2, waiting 23, completed 0, failed 3, total 28.
Import Monitor jobs: running 3, waiting 22, completed 0, failed 3, total 28.
Loading of 'SMIMCONT1' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 0, failed 4, total 28.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 1, waiting 22, completed 0, failed 5, total 28.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 0, waiting 22, completed 0, failed 6, total 28.
Import Monitor jobs: running 1, waiting 21, completed 0, failed 6, total 28.
Import Monitor jobs: running 2, waiting 20, completed 0, failed 6, total 28.
Import Monitor jobs: running 3, waiting 19, completed 0, failed 6, total 28.
Loading of 'SEOCOMPODF' import package: ERROR
Import Monitor jobs: running 2, waiting 19, completed 0, failed 7, total 28.
Loading of 'SAPNTAB' import package: ERROR
Import Monitor jobs: running 1, waiting 19, completed 0, failed 8, total 28.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 19, completed 0, failed 9, total 28.
Import Monitor jobs: running 1, waiting 18, completed 0, failed 9, total 28.
Import Monitor jobs: running 2, waiting 17, completed 0, failed 9, total 28.
Import Monitor jobs: running 3, waiting 16, completed 0, failed 9, total 28.
Loading of 'SAPSSEXC_2' import package: ERROR
Import Monitor jobs: running 2, waiting 16, completed 0, failed 10, total 28.
Loading of 'ATAB' import package: ERROR
Import Monitor jobs: running 1, waiting 16, completed 0, failed 11, total 28.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 16, completed 0, failed 12, total 28.
Import Monitor jobs: running 1, waiting 15, completed 0, failed 12, total 28.
Import Monitor jobs: running 2, waiting 14, completed 0, failed 12, total 28.
Import Monitor jobs: running 3, waiting 13, completed 0, failed 12, total 28.
Loading of 'REPOTEXT' import package: ERROR
Import Monitor jobs: running 2, waiting 13, completed 0, failed 13, total 28.
Loading of 'STXL' import package: ERROR
Import Monitor jobs: running 1, waiting 13, completed 0, failed 14, total 28.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 0, waiting 13, completed 0, failed 15, total 28.
Import Monitor jobs: running 1, waiting 12, completed 0, failed 15, total 28.
Import Monitor jobs: running 2, waiting 11, completed 0, failed 15, total 28.
Import Monitor jobs: running 3, waiting 10, completed 0, failed 15, total 28.
Loading of 'WDY_CTLR_COMPO' import package: ERROR
Import Monitor jobs: running 2, waiting 10, completed 0, failed 16, total 28.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 1, waiting 10, completed 0, failed 17, total 28.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 0, waiting 10, completed 0, failed 18, total 28.
Import Monitor jobs: running 1, waiting 9, completed 0, failed 18, total 28.
Import Monitor jobs: running 2, waiting 8, completed 0, failed 18, total 28.
Import Monitor jobs: running 3, waiting 7, completed 0, failed 18, total 28.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 2, waiting 7, completed 0, failed 19, total 28.
Loading of 'SAPSLEXC' import package: ERROR
Import Monitor jobs: running 1, waiting 7, completed 0, failed 20, total 28.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 0, waiting 7, completed 0, failed 21, total 28.
Import Monitor jobs: running 1, waiting 6, completed 0, failed 21, total 28.
Import Monitor jobs: running 2, waiting 5, completed 0, failed 21, total 28.
Import Monitor jobs: running 3, waiting 4, completed 0, failed 21, total 28.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 2, waiting 4, completed 0, failed 22, total 28.
Loading of 'SAPDDIM' import package: ERROR
Import Monitor jobs: running 1, waiting 4, completed 0, failed 23, total 28.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 0, failed 24, total 28.
Import Monitor jobs: running 1, waiting 3, completed 0, failed 24, total 28.
Import Monitor jobs: running 2, waiting 2, completed 0, failed 24, total 28.
Import Monitor jobs: running 3, waiting 1, completed 0, failed 24, total 28.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 0, failed 25, total 28.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 0, failed 26, total 28.
Loading of 'SAP0000' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 0, failed 27, total 28.
WARNING[E] 2009-04-10 18:45:34.749
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2009-04-10 18:45:34.764 sixxcstepexecute.cpp:950
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
I am very new on this so I probably will not understand many technical words.
Please. Can any one tell what´s going on. This is the 5th time I try to instal the program.
Thank you very much in advance.
Regards.Hi,
I got a similar error while installing Solution Manager 7 EHP1 on Windows/Oracle. Ihave gone through the import log, and the respective logs directed to, and pasted below.
Loading of 'REPOSRC' import package: ERROR
ERROR: 2009-06-18 11:19:40 com.sap.inst.migmon.LoadTask run
Loading of 'REPOSRC' import package is interrupted with R3load error.
Process 'D:\usr\sap\SMN\SYS\exe\uc\NTAMD64\R3load.exe -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -stop_on_error' exited with return code 2.
For mode details see 'REPOSRC.log' file.
REPOSRC.log
(TSK) ERROR: file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\REPOSRC.TSK.bck already seems to exist
a previous run may not have been finished cleanly
file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\REPOSRC.TSK possibly corrupted
D:\usr\sap\SMN\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
REPOSRC.TSK
REPOSRC.TSK.bck
Upon inspection of the previous .TSK files, i found that it contained a list of Tables to be created: the REPOSRC.TSK.bck was a continuation of the same list. Hence the installation uses/used both to see where it had stopped.
I found a sapnote 455195 (last paragraph) which advises that i run R3load with the -merge option, but how can i do that during the installation process? -
Error during SSL installation on weblogic 8.1
Hi
I'm getting an error during the installation of SSL certificate.
After importing the keystore, configuring the webserver and rebooting the webserver, I'm getting identity certificate expired error in the webserver logs.Due to this i'm unable to access the HTTPS URL.
But when i check the keystore, the validity of the certificate is there till 2010.I'm using WEBLOGIC 8.1If you get (for example) a 128-bit SSL certificate from Verisign you need to specify a Certificate Signing Request (CSR). This is unique for each server. If you have upgraded your server and the CSR generated from the weblogic CSR generator servlet is the same as it was in the previous version, then I guess you can use the same certificate. If the CSR has changed then I think you will need to replace the certificate, this costs $100. If it's been less than 30 days since your certificate was issued, it's free.
-
SAP NetWeaver 7.3 AS Java install error in Install Java Engine phase
Hi All,
I am doing my first installation of SAP NetWeaver 7.3 AS Java on Windows Server 2008 R2 with Oracle database 11.2.0.3, this is a domain installation.
I have been following the SAP Installation guide and everything has been going well but I am now stuck with an error in the Install Java Engine phase of the installation.
The error message I am receiving is:
An error occurred while processing option SAP NetWeaver 7.3 > SAP Systems > Application Server Java > Standard System > Standard System( Last error reported by the step: Process call 'C:\usr\sap\E1D\J00\exe\jstart.exe pf=\\sourcing\sapmnt\E1D\SYS\profile\E1D_J00_sourcing -file=C:\usr\sap\E1D\J00\exe\startup.properties -nodename=bootstrap -launch' exits with error code 1. For details see log file(s) jstart_bootstrap_J00.log.)
When I check the jstart_bootstrap_J00.log it is empty.
I have done some searching for a solution for this error and it seems it may be related to the database not running. I can confirm that I have run lsnrctl start and also, in sqlplus, run startup; both commands showed that the starting of the listener and database were successful.
Does anyone know what might be causing this error?
Many thanks
DanHi Srikishan,
In C:\Program Files\sapinst_instdir\NW73\INSTALL\NW73\ORA\STD the file jstart_bootstrap_J00.log is empty.
In C:\usr\sap\E1D\J00\work there was no jstart_bootstrap_J00.log file, however there was a file called log_bootstrap.0.log, the contents are:
<!--LOGHEADER[START]/-->
<!--HELP[Manual modification of the header may cause parsing problem!]/-->
<!--LOGGINGVERSION[2.0.7.1006]/-->
<!--NAME[..\..\work\log_bootstrap.log]/-->
<!--PATTERN[log_bootstrap.log]/-->
<!--FORMATTER[com.sap.tc.logging.TraceFormatter([%24d] %m)]/-->
<!--ENCODING[UTF8]/-->
<!--FILESET[0, 3, 5242880]/-->
<!--PREVIOUSFILE[log_bootstrap.2.log]/-->
<!--NEXTFILE[log_bootstrap.1.log]/-->
<!--LOGHEADER[END]/-->
[Aug 22, 2012 12:11:10 PM] Starting to configure the bootstrap
[Aug 22, 2012 12:11:10 PM] Bootstrap properties file [C:\usr\sap\E1D\J00\j2ee\cluster\bootstrap\bootstrap.properties] found
[Aug 22, 2012 12:11:10 PM] Bootstrap configured for [32] ms
[Aug 22, 2012 12:11:10 PM]
[Aug 22, 2012 12:11:10 PM] Memory available to the bootstrap JVM: [2 GiB / 3113877504 bytes]
[Aug 22, 2012 12:11:10 PM]
-----[Bootstrap Module started]--------[Wed Aug 22 12:11:10 BST 2012]-------
[Aug 22, 2012 12:11:10 PM]
+------------[Bootstrap synchronization activities information]-----------+
| Runtime Binaries: [X] Native files: [X] Instance Properties: [X] |
| Nodes Structure: [X] Cluster File System: [X] Online bootstrap: [ ] |
+-------------------------------------------------------------------------+
[Aug 22, 2012 12:11:10 PM] Properties used for initialization: [element.resynch=detect, Logging properties = {log[defaultTrace]=FileLog, log[defaultTrace].pattern=..\..\work\log_bootstrap.log, log[consoleLog].formatter=formatter[ConsoleFormatter], com.sap.engine.bootstrap.severity=Info, formatter[ConsoleFormatter]=TraceFormatter, log[consoleLog]=com.sap.engine.bootstrap.logging.BootstrapConsoleLog, com.sap.engine.bootstrap.logs=log[defaultTrace],log[consoleLog], log[defaultTrace].cnt=3, formatter[BootstrapFormatter]=TraceFormatter, log[defaultTrace].formatter=formatter[BootstrapFormatter], formatter[ConsoleFormatter].pattern=%m, log[defaultTrace].limit=5242880, formatter[BootstrapFormatter].pattern=[%24d] %m}, debug=no, Watchdog properties = {watchdog.timeout=90000, watchdog.check_interval=2000}]
[Aug 22, 2012 12:11:10 PM] Bootstrap initialized for [63] ms
[Aug 22, 2012 12:11:10 PM] Watchdog [90000] ms checking every [2000] ms started
[Aug 22, 2012 12:11:10 PM] Starting to initialize database connection
[Aug 22, 2012 12:11:11 PM] Exception occurred for component [internal/unkown] of type [unkown]
com.sap.engine.bootstrap.SynchronizationException: Storage access initialization failed.Check if the database is running and the database connection properties
at com.sap.engine.bootstrap.StorageAccess.<init>(StorageAccess.java:138)
at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:79)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:273)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:157)
----------==[ Caused by: ]==----------
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.createConnection(DBConnectionPoolImpl.java:412)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.<init>(DBConnectionPoolImpl.java:167)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandlerImpl.<init>(PersistenceHandlerImpl.java:50)
at com.sap.engine.core.configuration.impl.cache.ConfigurationController.<init>(ConfigurationController.java:138)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:307)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.bootstrap.StorageAccess.<init>(StorageAccess.java:131)
at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:79)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:273)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:157)
Caused by: com.sap.sql.log.OpenSQLException: Could not load class oracle.jdbc.driver.OracleDriver with class loader com.sap.engine.offline.FileClassLoader@68814013.
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:104)
at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:210)
at com.sap.sql.connect.factory.VendorConnectionFactory.createVendorDriver(VendorConnectionFactory.java:43)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.<init>(DriverPooledConnectionFactory.java:31)
at com.sap.sql.connect.datasource.DataSourceManager.createPooledConnectionFactory(DataSourceManager.java:642)
at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:603)
at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:137)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getDataSource(OpenSQLDataSourceImpl.java:272)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:208)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.createConnection(DBConnectionPoolImpl.java:399)
... 13 more
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:911)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:802)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:750)
at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:206)
... 21 more
[Aug 22, 2012 12:11:11 PM] [Bootstrap]> Error during synchronization. More details: the previous log entries
[Aug 22, 2012 12:12:29 PM] Starting to configure the bootstrap
[Aug 22, 2012 12:12:29 PM] Bootstrap properties file [C:\usr\sap\E1D\J00\j2ee\cluster\bootstrap\bootstrap.properties] found
[Aug 22, 2012 12:12:29 PM] Bootstrap configured for [32] ms
[Aug 22, 2012 12:12:29 PM]
[Aug 22, 2012 12:12:29 PM] Memory available to the bootstrap JVM: [2 GiB / 3113877504 bytes]
[Aug 22, 2012 12:12:29 PM]
-----[Bootstrap Module started]--------[Wed Aug 22 12:12:29 BST 2012]-------
[Aug 22, 2012 12:12:29 PM]
+------------[Bootstrap synchronization activities information]-----------+
| Runtime Binaries: [X] Native files: [X] Instance Properties: [X] |
| Nodes Structure: [X] Cluster File System: [X] Online bootstrap: [ ] |
+-------------------------------------------------------------------------+
[Aug 22, 2012 12:12:29 PM] Properties used for initialization: [element.resynch=detect, Logging properties = {log[defaultTrace]=FileLog, log[defaultTrace].pattern=..\..\work\log_bootstrap.log, log[consoleLog].formatter=formatter[ConsoleFormatter], com.sap.engine.bootstrap.severity=Info, formatter[ConsoleFormatter]=TraceFormatter, log[consoleLog]=com.sap.engine.bootstrap.logging.BootstrapConsoleLog, com.sap.engine.bootstrap.logs=log[defaultTrace],log[consoleLog], log[defaultTrace].cnt=3, formatter[BootstrapFormatter]=TraceFormatter, log[defaultTrace].formatter=formatter[BootstrapFormatter], formatter[ConsoleFormatter].pattern=%m, log[defaultTrace].limit=5242880, formatter[BootstrapFormatter].pattern=[%24d] %m}, debug=no, Watchdog properties = {watchdog.timeout=90000, watchdog.check_interval=2000}]
[Aug 22, 2012 12:12:29 PM] Bootstrap initialized for [63] ms
[Aug 22, 2012 12:12:29 PM] Watchdog [90000] ms checking every [2000] ms started
[Aug 22, 2012 12:12:29 PM] Starting to initialize database connection
[Aug 22, 2012 12:12:30 PM] Exception occurred for component [internal/unkown] of type [unkown]
com.sap.engine.bootstrap.SynchronizationException: Storage access initialization failed.Check if the database is running and the database connection properties
at com.sap.engine.bootstrap.StorageAccess.<init>(StorageAccess.java:138)
at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:79)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:273)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:157)
----------==[ Caused by: ]==----------
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.createConnection(DBConnectionPoolImpl.java:412)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.<init>(DBConnectionPoolImpl.java:167)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandlerImpl.<init>(PersistenceHandlerImpl.java:50)
at com.sap.engine.core.configuration.impl.cache.ConfigurationController.<init>(ConfigurationController.java:138)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:307)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:57)
at com.sap.engine.bootstrap.StorageAccess.<init>(StorageAccess.java:131)
at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:79)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:273)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:157)
Caused by: com.sap.sql.log.OpenSQLException: Could not load class oracle.jdbc.driver.OracleDriver with class loader com.sap.engine.offline.FileClassLoader@38ee6681.
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:104)
at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:210)
at com.sap.sql.connect.factory.VendorConnectionFactory.createVendorDriver(VendorConnectionFactory.java:43)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.<init>(DriverPooledConnectionFactory.java:31)
at com.sap.sql.connect.datasource.DataSourceManager.createPooledConnectionFactory(DataSourceManager.java:642)
at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:603)
at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:137)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getDataSource(OpenSQLDataSourceImpl.java:272)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:208)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.createConnection(DBConnectionPoolImpl.java:399)
... 13 more
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:911)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:802)
at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:750)
at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:206)
... 21 more
[Aug 22, 2012 12:12:30 PM] [Bootstrap]> Error during synchronization. More details: the previous log entries
Many thanks
Dan -
Error during sap r/3 installation at update databse statistics
Hi friends,
I am getting an error during sap r/3 installation almost at the last stage.
the error is at update database statistics.
my configuration is
os: windows 2000 server.
d/b: oracle 9i.
erp: sap 4.7 ee
During oracle installation stage the oui is asking for create a database, i am chechking it ok. Is that a problem ?.
I am sending the log file. Please can anybody help me, where i am going wrong-
The log file----
Click Browse and give location of export1, as shown in the bellow figure
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata4\drs620_5.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata4\drs620_5 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata5\drs620_6.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata5\drs620_6 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata5\drs620_7.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata5\drs620_7 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drs620_8.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drs620_8 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drs620_9.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drs620_9 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drsusr_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drsusr_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata2\roll_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata2\roll_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata3\temp_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata3\temp_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata1\system_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata1\system_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-02-04 21:46:33
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2007-02-04 21:46:34
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-02-04 21:46:35
Creating file c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 21:46:36
Creating file C:\oracle\ora90\database\initDRS.sap.
INFO 2007-02-04 21:46:37
Copying file F:/sap4.7/ker/NT/COMMON/INSTALL/INITSID.DBA to: c:\oracle\ora90/database/initDRS.dba.
INFO 2007-02-04 21:46:37
Creating file c:\oracle\ora90\database\initDRS.dba.
INFO 2007-02-04 21:46:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:46:39
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-04 21:46:39
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 21:46:39
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-04 21:46:40
Creating file C:\SAPinst ORACLE KERNEL\oradim.log.
INFO 2007-02-04 21:46:45
See 'c:\oracle\ora90/bin/oradim -new -sid DRS -STARTMODE auto' output in 'C:\SAPinst ORACLE KERNEL\oradim.log'.
INFO 2007-02-04 21:46:45
'c:\oracle\ora90/bin/oradim -new -sid DRS -STARTMODE auto' returned with '0'.
INFO 2007-02-04 21:46:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:46:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:59:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:01:31
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:01:34
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:02:18
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:02:20
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:55
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:04:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:04:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:05:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:05:35
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:06:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:06:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:10
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:40
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:41
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:44
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-04 22:10:44
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 22:10:44
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-04 22:10:45
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-02-04 22:10:46
See 'c:\oracle\ora90/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-02-04 22:10:46
'c:\oracle\ora90/bin/lsnrctl stat' returned with '3'.
INFO 2007-02-04 22:10:46
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-02-04 22:10:48
See 'c:\oracle\ora90/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-02-04 22:10:48
'c:\oracle\ora90/bin/lsnrctl start' returned with '0'.
INFO 2007-02-04 22:10:48
Copying file F:/sap4.7/ker/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2007-02-04 22:10:48
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2007-02-04 22:10:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
PHASE 2007-02-04 22:10:54
Database Load
INFO 2007-02-04 22:10:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Task files created
INFO 2007-02-04 22:11:03
Command files created
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 00:06:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 03:43:19
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 04:55:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:17:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:39:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:45:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:57:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:00:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:03:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:05:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:07:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:08:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:09:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:24:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:24:46
Processes finished successfully
INFO 2007-02-05 06:26:23
Creating file C:\SAPinst ORACLE KERNEL\ddicora.sql.
INFO 2007-02-05 06:26:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:30
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:43
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-05 06:26:43
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-05 06:26:43
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:55
Creating file C:\SAPinst ORACLE KERNEL\brconnect.log.
INFO 2007-02-05 06:26:55
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:55
See 'D:\usr\sap\DRS\SYS\exe\run/brconnect -c -f crsyn -o SAPDRS' output in 'C:\SAPinst ORACLE KERNEL\brconnect.log'.
ERROR 2007-02-05 06:26:55
MOS-01012 PROBLEM: 'D:\usr\sap\DRS\SYS\exe\run/brconnect -c -f crsyn -o SAPDRS' returned with '128' which is not a defined as a success code.
ERROR 2007-02-05 06:26:55
FJS-00012 Error when executing script.
kindly help me where i am going wrong.
Yours friendly,
Bharath.Hi Andreas,
many thanks to you for the timely help.
a.)I want to know why there is an error at brconnect ? why is it returning an error code (128) at UPDATE DATABASE STATISTICS stage.
I have read in this forum itself that the UPDATE STATISTICS need not be suceesfully completed and we can edit database.r3s
" ..on the other hand you can easily invoke the update statistics after the installation has ended (succesfully!)...edit DATABASE.R3S (or the appropriate template file you are using) by changing the status=ERROR to status=OK...this will let you finish the installation..-GreetZ, AH."
I have searched for this file (database.r3s) in my system in vain Where can i find this file database.r3s?.
Have i done any configuration mistake at the pre-installation stage. I have installed Oracle 9.0 using setup.exe of oracle. should i use sapserver.cmd to install oracle?.I havent applied any patch for Oracle 9.0
Should I apply any patch just the same way we do for Oracle 8.1.x ?. If so, where can i get the patch for Oracle 9.0 .?.
b.) You said there should not be any spaces in file path (ex: C:/SAPinst ORACLE KERNEL/) . But I havent specified file path, the r/3 setup itself has created the directory path.
c.) I want to know one thing- should we create a database before installing r/3. When we are installing Oracle 8/9. x what are the components that we are installing?
Your friend,
Bharath. -
ECC6.0 installation error in Import ABAP Phase
Dear Experts,
I am in the process if Installing IDES for ECC 6.0 Non Unicode
Installation (SAP ERP 2005 SR2). During IMPORT ABAP
phase geting below error:
ERROR 2007-12-13 14:48:37
CJS-30022 Program 'Migration Monitor' exits with error code 103. For
details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-12-13 14:48:37
FCO-00011 The step runMigrationMonitor with step key
|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was
executed with status ERROR .
Import_monitor.java.log:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 4, completed 31, failed 0, total 36.
Import Monitor jobs: running 2, waiting 3, completed 31, failed 0, total 36.
Import Monitor jobs: running 3, waiting 2, completed 31, failed 0, total 36.
Loading of 'SAPSSEXC_3' import package: ERROR
Import Monitor jobs: running 2, waiting 2, completed 31, failed 1, total 36.
Import Monitor jobs: running 3, waiting 1, completed 31, failed 1, total 36.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 31, failed 2, total 36.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 31, failed 3, total 36.
Loading of 'SAPSSEXC_4' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 31, failed 4, total 36.
Import_monitor.log:
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\EC4\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\EC4\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080106214611
Please help me ASAP.
Regards,
Gajapathi Raju.Dear Marquis,
Some body copied dumps from Hard disk to server not from original cd's.Might be copied not properly.I have copied from Original cd's,Then i was suceed in installation.
Regards,
Gajapathi Raju.
Edited by: V R Gajapathi Raju on Feb 13, 2008 9:24 AM -
Create Index error on all jobs of import abap installation phase
Hello,
I'm facing an issue on import abap phase on IDES SAP ERP 2004 installation over SLES 11/MaxDB 7.6.03 build 9.
Logs below are focused on table REPOSRC because it is the first error over installation, the same error appear again and again for the next tables.
We ran the installation again changing the number of parallel processes to 1 job at time but finally nothing change.
sapdb log size : -rw-rw---- 1 sdb sdba 8808038400 Mar 30 23:01 DISKL001
cache_size = 159488
Thanks in advance, Deiby
import_monitor.log
TRACE: 2010-03-29 16:53:00 com.sap.inst.migmon.LoadTask run
Loading of 'REPOSRC' import package is started.
TRACE: 2010-03-29 16:53:00 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'REPOSRC' import package:
/usr/sap/IDS/SYS/exe/run/R3load -ctf I /software/51034985/51034985_2/EXP2/DATA/REPOSRC.STR /tmp/sapinst_instdir/ERP/SYSTEM/ADA/CENTRAL/AS/DDLADA.TPL REPOSRC.TSK ADA -l REPOSRC.log
TRACE: 2010-03-29 16:53:00 com.sap.inst.migmon.LoadTask processPackage
Loading of 'REPOSRC' import package into database:
/usr/sap/IDS/SYS/exe/run/R3load -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -nolog -c 10000
ERROR: 2010-03-29 16:53:04 com.sap.inst.migmon.LoadTask run
Loading of 'REPOSRC' import package is interrupted with R3load error.
Process '/usr/sap/IDS/SYS/exe/run/R3load -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -nolog -c 10000' exited with return code 2.
For mode details see 'REPOSRC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
REPOSRC.log
/usr/sap/IDS/SYS/exe/run/R3load: START OF LOG: 20100329165300
/usr/sap/IDS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/IDS/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Jan 23 2008 17:32:58
/usr/sap/IDS/SYS/exe/run/R3load -ctf I /software/51034985/51034985_2/EXP2/DATA/REPOSRC.STR /tmp/sapinst_instdir/ERP/SYSTEM/ADA/CENTRAL/AS/DDLADA.TPL REPOSRC.TSK ADA -l REPOSRC.log
/usr/sap/IDS/SYS/exe/run/R3load: job completed
/usr/sap/IDS/SYS/exe/run/R3load: END OF LOG: 20100329165300
/usr/sap/IDS/SYS/exe/run/R3load: START OF LOG: 20100329165300
/usr/sap/IDS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/IDS/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Jan 23 2008 17:32:58
/usr/sap/IDS/SYS/exe/run/R3load -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -nolog -c 10000
DbSl Trace: prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS)
DbSl Trace: SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS)
(DB) INFO: connected to DB
(DB) INFO: The MaxDB logwriter is switched off#20100329165300
(DB) INFO: Savepoint on database executed#20100329165300
(DB) INFO: REPOSRC created#20100329165300
(DB) INFO: Savepoint on database executed#20100329165301
(DB) INFO: REPOSRC~0 created#20100329165301
DbSl Trace: writeLob() of C_0003, rc=1, rcSQL=-10201 (Function sequence error (no data for execution expected))
DbSl Trace: LOB_WRITE on connection 0, rc=-10201 (Function sequence error (no data for execution expected))
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "REPOSRC"
(SQL error -10201)
error message returned by DbSl:
Function sequence error (no data for execution expected)
(DB) INFO: disconnected from DB
/usr/sap/IDS/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/IDS/SYS/exe/run/R3load: END OF LOG: 20100329165304
/usr/sap/IDS/SYS/exe/run/R3load: START OF LOG: 20100330120734
/usr/sap/IDS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/IDS/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Jan 23 2008 17:32:58
/usr/sap/IDS/SYS/exe/run/R3load -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -nolog -c 10000
(DB) INFO: connected to DB
(DB) INFO: The MaxDB logwriter is switched off#20100330120734
(DB) INFO: Savepoint on database executed#20100330120735
(DB) INFO: REPOSRC deleted/truncated#20100330120735
DbSl Trace: writeLob() of C_0004, rc=1, rcSQL=-10201 (Function sequence error (no data for execution expected))
DbSl Trace: LOB_WRITE on connection 0, rc=-10201 (Function sequence error (no data for execution expected))
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "REPOSRC"
(SQL error -10201)
error message returned by DbSl:
Function sequence error (no data for execution expected)
DbSl Trace: EXECUTE on connection 0, rc=-1452 (POS(1) Duplicate secondary key)
ERROR : Execute for create index BNK_BATCH_HEADERBA on BNK_BATCH_HEADER failed (dbrc=99).
(SQL error -1452)
error message returned by DbSl:
SQL-Statement: CREATE UNIQUE INDEX "BNK_BATCH_HEADERBA" ON "BNK_BATCH_HEADER" ( "MANDT" , "BATCH_NO" )
/usr/sap/IDS/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/IDS/SYS/exe/run/R3load: END OF LOG: 20100330120739
REPOSRC.TSK
T REPOSRC C ok
P REPOSRC~0 C ok
D REPOSRC I err
Edited by: Deiby Alvez on Mar 31, 2010 10:39 PMhello friends,
i have a similar error in context of an unicode conversion in phase import with r3load. in logs in file D010TAB.log i see the following output:
DbSl Trace: EXECUTE on connection 0, rc=-7055 (POS(55) Column(s) already indexed:/BI0/E0D_DECU~P)
ERROR : Execute for create index /BI0/E0D_DECU~P on /BI0/E0D_DECU failed (dbrc=99).
(SQL error -7055)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "/BI0/E0D_DECU~P" ON "/BI0/E0D_DECU" ( "KEY_0D_DECUP" , "KEY_0D_DECUT" , "KEY_0D_DECUU" , "KEY_0D_DECU1" , "KEY_0D_DECU2" , "KEY_0D_DECU3" , "KEY_0D_DECU4" , "KEY_0D_DECU5" )
POS(55) Column(s) already indexed:/BI0/E0D_DECU~P
/usr/sap/SPV/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SPV/SYS/exe/run/R3load: END OF LOG: 20100414185908
45 / 47 are complete in phase import.
For a TEST Case , i have deleted all indices on tables in selection of /BI0/*. I will rerun this procedure. the largest part of indices on tables come from a bw-installation in a seperate client.
best regards,
christoph -
SAP INSTALLATION ECC6 WINDOWS 2003 ORACLE ERROR
while on the process of sap installation we are getting the error at phase 33 ie.java users creation phase.the error as follows.
1.
ERROR: CJS-30197.for more details see o/p of log file.but we do know where is that file.
2.FCO-00011 The step createJSF with step key.
pls tell us how to proceed.Thanks in advance.This is a known issue and the solution has been posted before in this forum. In short, you need to create the user manually in the backend system. Make sure to set the password for this user account to the same as you specified during "sapinst"
-
SAP NW04s: Import Abap Phase Error
Hi
i try to install sap nw04s with oracle 10g in Redhat 5 Environment.
During Import Abap Phase: i got error:
l attached the ERROR LOGS.
SAPINST.DEV.LOG
ERROR 2008-09-02 02:16:53
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-09-02 02:16:53 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
TRACE [iaxxgenimp.cpp:719]
showDialog()
<html><head></head><body><p>An error occurred while processing service <b>SAP NetWeaver 2004s Support Release 2 > SAP Systems > Oracle > Central System > Central System Installation</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:1155]
showDialog()
waiting for an answer from gui
INFO 2008-09-02 02:17:21 [iaxxgenimp.cpp:782]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
SAPINST.LOG
WARNING 2008-09-02 02:16:53
Execution of the command "/usr/java/j2sdk1.4.2_12/bin/java -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs /opt/sapdump/51032246_NW_exp/EXP1:/opt/sapdump/51032246_NW_exp/EXP2:/opt/sapdump/51032246_NW_exp/EXP3 -installDir /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS -orderBy "" -r3loadExe /usr/sap/PBC/SYS/exe/run/R3load -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 16, failed 0, total 18.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 16, failed 1, total 18.
IMPORT.MONITOR.LOG
WARNING 2008-09-02 02:16:53
Execution of the command "/usr/java/j2sdk1.4.2_12/bin/java -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs /opt/sapdump/51032246_NW_exp/EXP1:/opt/sapdump/51032246_NW_exp/EXP2:/opt/sapdump/51032246_NW_exp/EXP3 -installDir /tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS -orderBy "" -r3loadExe /usr/sap/PBC/SYS/exe/run/R3load -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 16, failed 0, total 18.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 16, failed 1, total 18.
kinldy provide me solutions.........
regards
raghuhi!
i attached SAPSSEXC.LOG
(IMP) INFO: import of ENH_DY_SUBS completed (0 rows) #20080902010623
(DB) INFO: ENH_DY_SUBS~0 created #20080902010623
(DB) INFO: ENLFDIR created #20080902010623
(RFF) ERROR: invalid checksum in data file "/opt/sapdump/51032246_NW_exp/EXP1/DATA/SAPSSEXC.001"
current table was "ENLFDIR"
(DB) INFO: disconnected from DB
/usr/sap/PBC/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/PBC/SYS/exe/run/R3load: END OF LOG: 20080902010623
/usr/sap/PBC/SYS/exe/run/R3load: START OF LOG: 20080902014139
/usr/sap/PBC/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PBC/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Aug 29 2006 07:46:52
/usr/sap/PBC/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ENLFDIR deleted/truncated #20080902014139
(RFF) ERROR: invalid checksum in data file "/opt/sapdump/51032246_NW_exp/EXP1/DATA/SAPSSEXC.001"
current table was "ENLFDIR"
(DB) INFO: disconnected from DB
/usr/sap/PBC/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/PBC/SYS/exe/run/R3load: END OF LOG: 20080902014139
/usr/sap/PBC/SYS/exe/run/R3load: START OF LOG: 20080902020550
/usr/sap/PBC/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PBC/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Aug 29 2006 07:46:52
/usr/sap/PBC/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ENLFDIR deleted/truncated #20080902020551
(RFF) ERROR: invalid checksum in data file "/opt/sapdump/51032246_NW_exp/EXP1/DATA/SAPSSEXC.001"
current table was "ENLFDIR"
(DB) INFO: disconnected from DB
/usr/sap/PBC/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/PBC/SYS/exe/run/R3load: END OF LOG: 20080902020551
/usr/sap/PBC/SYS/exe/run/R3load: START OF LOG: 20080902020637
/usr/sap/PBC/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PBC/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Aug 29 2006 07:46:52
/usr/sap/PBC/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ENLFDIR deleted/truncated #20080902020637
(RFF) ERROR: invalid checksum in data file "/opt/sapdump/51032246_NW_exp/EXP1/DATA/SAPSSEXC.001"
current table was "ENLFDIR"
(DB) INFO: disconnected from DB
/usr/sap/PBC/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/PBC/SYS/exe/run/R3load: END OF LOG: 20080902020637
/usr/sap/PBC/SYS/exe/run/R3load: START OF LOG: 20080902021524
/usr/sap/PBC/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PBC/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Aug 29 2006 07:46:52
/usr/sap/PBC/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ENLFDIR deleted/truncated #20080902021525
(RFF) ERROR: invalid checksum in data file "/opt/sapdump/51032246_NW_exp/EXP1/DATA/SAPSSEXC.001"
current table was "ENLFDIR"
(DB) INFO: disconnected from DB
/usr/sap/PBC/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/PBC/SYS/exe/run/R3load: END OF LOG: 20080902021525
/usr/sap/PBC/SYS/exe/run/R3load: START OF LOG: 20080902021624
/usr/sap/PBC/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PBC/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Aug 29 2006 07:46:52
/usr/sap/PBC/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ENLFDIR deleted/truncated #20080902021624
(RFF) ERROR: invalid checksum in data file "/opt/sapdump/51032246_NW_exp/EXP1/DATA/SAPSSEXC.001"
current table was "ENLFDIR"
(DB) INFO: disconnected from DB
/usr/sap/PBC/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/PBC/SYS/exe/run/R3load: END OF LOG: 20080902021625
regards
raghu -
CALL TO SYSLIB FAILED ERROR WHILE SAP 4.7 DATABASE INSTANCE INSTALLATION
I am trying to install SAP 4.7 with Oracle 9.2.0.1 on W2k SP3. I have installed central instance successfully. While installing Database instance, almost at the end of installation, i am facing problem with error message call to system library failed. i am attaching the log. Please help
PHASE 2007-06-25 00:53:53
SAP R/3 Enterprise 4.70 for Oracle
PHASE 2007-06-25 00:53:53
SAP Web Application Server
PHASE 2007-06-25 00:53:53
Request common parameters of SAP System
PHASE 2007-06-25 00:53:54
Create operating system accounts
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:54:00
Adapt filesystem
PHASE 2007-06-25 00:54:00
Prepare check/adapt SAP instance filesystem
PHASE 2007-06-25 00:54:00
Extract archives
PHASE 2007-06-25 00:54:01
Extract SAP System kernel archives
PHASE 2007-06-25 00:54:02
Create service ports
PHASE 2007-06-25 00:54:02
Generate instance profiles
PHASE 2007-06-25 00:54:02
Versionize default profile, instance profile and start profile
INFO 2007-06-25 00:54:07
Copying file E:/SAPinst ORACLE KERNEL/keydb.xml to: E:/SAPinst ORACLE KERNEL/keydb.3.xml.
INFO 2007-06-25 00:54:07
Creating file E:\SAPinst ORACLE KERNEL\keydb.3.xml.
WARNING 2007-06-25 00:54:11
Error 1314 (A required privilege is not held by the client.
) in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora92/bin/sqlplus.exe /NOLOG @ora_scr_tmp.sql).
ERROR 2007-06-25 00:54:11
MDB-06029 Caught exception while trying to start script executing application: [E:\oracle\ora92/bin/sqlplus.exe].
ERROR 2007-06-25 00:54:11
MDB-06030 A call to the system library failed. System error message: [Unknown error].
ERROR 2007-06-25 00:54:11
MUT-02011 Internal error: A call to syslib failed. System error message: Unknown error.
ERROR 2007-06-25 00:54:11
FJS-00012 Error when executing script.What do mean with administrative priviledges? there is no administrativ priviledge on Windows. We only have a local group administrators.
in 4.7 sapinst will put erpadm and sapserviceerp to the local administrators group. There is no need to do it manually.
But this will not help in this case, because local Administrators did not have the rights
- replace process level token
- act as part of the operating system
if you don't believe me have a look at gpedit.msc Local Computer Policy - Computer Configartion - Windows Settings - Security Settings - Local Policy - User Rights Assignemt.
But as I already told you, log on and log off will fix this rights problem.
2. regarding memory: RAM is physical Memory
did I read right you are trying to install 4.7 on a 256 MB box?
forget that! 256 MB is often too less for office application. Enterprise Style applications and database will need at least ten times 256 MB (and even that is too small).
By the way Pagefile needs to be at least 4-8 GB.
Peter
Peter -
Installation Error with SAP ERP6,EHP7, NW7.4 (IDES Export)
Hi,
I am trying to setup an IDES Server and downloaded the latest packages from market place.
Operating System: SLES 11 SP3, in SAP flavour as it is provided by Novell.
There is enough space on disks as per Note 2012989 and the Installation Guide.
This is my first Sybase SAP-Installation.
The error appears in phase "Setup Backup Server".
bsrv,log:
Building Backup Server 'SIS_BS':
Writing entry into directory services...
Directory services entry complete.
Writing RUN_SIS_BS file...
RUN_SIS_BS file complete.
Starting server...
Unable to boot server 'SIS_BS'.
Task failed
Server 'SIS_BS' was not created.
And from sapinst_dev.log:
ERROR
2014-07-09 12:48:18.956 [CInstallerCallBackImpl.cpp:228]
CJS-00030 Assertion failed: Unable to set up backup server. Refer to trace file sapinst_dev.log for further information.
TRACE
2014-07-09 12:48:19.9 [JSExtension.hpp:141]
JSExceptionHandler::setJSException()
Member function 'Installer.abortInstallation()' has thrown ESAPinstException. Converting to JavaScript exception EJS::Exception.
TRACE
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException
ERROR
2014-07-09 12:48:19.010
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in module call: .
TRACE
2014-07-09 12:48:19.11 [JSExtension.hpp:1065]
CallFunctionBase::call()
Member function 'Installer.invokeModuleCall() has thrown unknown exception. Rethrowing.
Thanks for looking and any hints welcome.
SvenI have investigated further and found the following:
Got error while installing Sybase 15.7
My servers environment/ explainer:
Hostname and SID: SIS
/etc/hosts
10.10.50.50
s25.domain.tld s25
10.10.50.50 sis_bs.domain.tld sis_bs
10.10.50.51 sis.domain.tld sis
/sybase/hosts.allow
sis.domain.tld +
s25.domain.tld +
sis_bs.domain.tld +
10.10.50.50 +
10.10.50.51 +
RUN_SIS_BS:
s25:/sybase/SIS/ASE-15_0/install # cat RUN_SIS_BS
#!/bin/sh
# Error log path: /sybase/SIS/ASE-15_0/install/SIS_BS.log
# Maximum number of network connections: 25
# Maximum number of server connections: 20
# Multibuf executable path: /sybase/SIS/ASE-15_0/bin/sybmultbuf
# Backup Server name: SIS_BS
/sybase/SIS/ASE-15_0/bin/backupserver \
-e/sybase/SIS/ASE-15_0/install/SIS_BS.log \
-N25 \
-C20 \
-M/sybase/SIS/ASE-15_0/bin/sybmultbuf \
-SSIS_BS \
SIS_BS.log
Jul 13 14:20:32 2014: Backup Server/15.7 SP122/EBF 22779/P/Linux AMD Opteron/Enterprise Linux/ase157sp12x/4489/64-bit/OPT/Fri Apr 18 23:08:01 2014
Jul 13 14:20:32 2014: Confidential property of Sybase, Inc.
Copyright 1987, 2014
Sybase, Inc. All rights reserved.
Unpublished rights reserved under U.S. copyright laws.
This software contains confidential and trade secret information of Sybase,
Inc. Use, duplication or disclosure of the software and documentation by
the U.S. Government is subject to restrictions set forth in a license
agreement between the Government and Sybase, Inc. or other written
agreement specifying the Government's rights to use the software and any
applicable FAR provisions, for example, FAR 52.227-19.
Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
Logging Backup Server messages in file '/sybase/SIS/ASE-15_0/install/SIS_BS.log'
Jul 13 14:20:32 2014: Backup Server: 1.78.1.1: The interfaces file used by the backup server is '/sybase/SIS/interfaces'.
Jul 13 14:20:32 2014: Backup Server: 1.88.1.1: The hosts authentication file used by the backup server is '/sybase/SIS/hosts.allow'.
Jul 13 14:20:32 2014: Backup Server: 1.79.1.1: The backup server name is 'SIS_BS'.
Jul 13 14:20:32 2014: Backup Server: 1.70.1.1: Configuring the maximum shared memory usage to 48 MB.
Jul 13 14:20:32 2014: Backup Server: 1.69.1.2: Configuring the number of service threads to 48.
Jul 13 14:20:32 2014: Backup Server: 1.70.1.3: Configuring the maximum shared memory per stripe to 1048576 bytes.
Jul 13 14:20:32 2014: Backup Server: 2.24.2.1: The host '10.10.50.50' is not authorized to connect to this Backup Server.
Jul 13 14:20:32 2014: Backup Server: 5.40.2.1: Login host authentication has failed.
Jul 13 14:20:32 2014: Open Server Error: 16240.10.0: Net-Library routine sybnet_listen() failed in srv__start_net
Network error: status = 23 - Net-Lib protocol driver call to register a listener failed
Jul 13 14:20:32 2014: Open Server Server Fatal Error: 16029.20.0: Failed to start any network listeners
Jul 13 14:20:42 2014: Backup Server: 2.24.2.1: The host '10.10.50.50' is not authorized to connect to this Backup Server.
Maybe you are looking for
-
I submitted my question but ran out of room in the box. I can still down load new Apps to my iPod touch AND update them but CAN NOT update the older Apps. that was on the iPod before the problem. I have been to Three Apple Service Center stores - In
-
Only amandment lines reflecting in po form print
Hi All, My print out is displaying correct in me23n (its displaying the details of both changed items as well as not changed items ) but if i see the same through me9f , and messgae output i am getting only the amandment detials (the line items which
-
I have installed flash player and also I have installed flash video downloader. i cant download videos how to download videosu
-
Migrate Central instance from 32-bit to 64-bit
Hi All, We have SAP in Distributed Environmnet( Central Instance running on 32-bit windows & Database instance is running on 64-bit AIX). Since there are lots of memory dumps , we have decided to upgrade Central instance from 32-bit to 64-bit windows
-
LFA1, T024E,TSP01,S012 - Tables definitions please,
Hello ABAPers, I want to know the details and what is the use of the following tables . <b>LFA1, T024E, TSP01, S012</b> awaiting for reply.