Error in saving .aspx pages after editing the XSLT

Hi,
I am developing a SharePoint 2010 web app and I had to do some modifications for a .aspx page which has a data form web part and I am encountering following issues:
1. After selecting the web part, when trying to modify the filter criteria of the data source, the "group" and "ungroup" buttons are seen as disabled and the option of editing in the XSLT editor is also not visible.
2. after editing the XSLT, knowing that there are no issues if I try to save it an is showed saying null value issue and asking whether to allow scripts to run in this page r not. After choosing either yes or no, when I try to preview it in browser I get
an error in the place where I have the data form web part saying error with web part try to edit it in SharePoint editor such as SharePoint designer.
3. this is happening only i try to edit the code but no matter how many copies I get from the original page, they are correctly previewed in the browser unless I try to edit it.
your kind support or suggestions are highly appreciated as I am unable to fix this
thanks.

Data you are changing is on the frontend. You need to pass data to backend (server). The static method 'dispatch' of control framework class (CL_GUI_CFW) is used to do this 'manual' synchronization. It is sort of helper method of control framework (which is basis for ALV controls) and is independent of ALV controls (cl_gui_alv_grid etc.) that are used.
Try putting this code as suggested and check.
short code would be (without error handling)
CL_GUI_CFW=>DISPATCH( ).
null

Similar Messages

I have created a form in InDesign, exported to a pdf, created an editable form and saved. When I open the form and make changes and save, the reopen the changes are there. If try to email this form as an attachment after editing, the attachment is alway

I have created a form in InDesign, exported to a pdf, then created an editable form and saved. When I open the form and make changes and save, then reopen the changes are there. If try to email this form as an attachment after editing, the attachment is always minus the edits. ????

Hi chuck,
If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
Can you please send the form to me at [email protected] so that I can have a look.
Regards,
Rave

How to do that when you open a new tab to appear like the start page after opening the browser?

How to do that when you open a new tab to appear like the start page after opening the browser?

https://addons.mozilla.org/en-US/firefox/addon/newtaburl/
Never used it myself, so I'm not sure if you can set to about:home or not. You'll have to give it a try.

SharePoint Bug? Conflict Error when saving a Page with a "Required" DateTime field in the page layout

Hello,
I've just recently encountered a weird error / bug in SharePoint. Here is the scenario:
- I have a custom column "Test Date" that is of DateTime field type. The field is configured as REQUIRED.
- It is added to a custom Content Type "Test CT" that is based on a "Publishing Page" content type
- I have created a Page Layout "Test PL" which is based on that particular content type.
Now here is what happens:
1. I try to create a page based on both that Content Type and Page Layout in the Pages Library. I manage to create it successfully.
2. However, when I go to try and edit the page, fill-in the required values and try to save it using the PAGE TAB -> SAVE BUTTON, I get the below error/s. Note that this happens no matter what I choose in the drop-down menu for Save Button.
"The file XXX has been modified by USER on DATE"
But I know I am the ONLY user modifying the page.
If I try to save again it gives me options to whether Discard my Changes, Keep Editing, Overwrite Changes, or Merge.
3. HOWEVER, if I use the Save button on the UPPER RIGHT corner of the screen (the shortcut). I am able to save successfully without any errors!
The only thing I've tried that made it work was if I made the DateTime OPTIONAL. But I need it to be REQUIRED.
Is there any workaround to this error / bug?
Thanks

I have some additional info but nothing really good.
If you click the Save in the left side of the Ribbon then it looks like that is when you get the message. If you click the Save in the top right corner you won't get the message. They must be calling different saving functions.
There really is no way around it other than making the field optional which probably removes some server side validation checks causing that message.
We've chosen to remove that field from the page as I needed it required, then they can't publish the page until they go to the properties and set the article date. By removing the field from the page layout the message goes away.
I hope MS will fix this at some point.
-tom daly

Contribute CS3 embeds the contents of SSI Includes into page after Edit and Publish

I have tried every possible way to figure this out but it
seems as though no one has this problem or a solution...
My Dreamweaver CS3 Template based files that have SSI
Includes placed in a "non-editable region" of a template and/or
nested templates are continually embedded, merged, or hard-coded (I
used those keywords for anyone else who might be searching for help
on this frustrating issue) into the page after it has been edited
and published with Contribute CS3 for Windows.
After many, many, hours and days rebuilding templates
(thinking that it was my code), experimenting with .htaccess
include_path variables, and cursing this application, I have come
to one conclusion - if I put my includes within "editable regions"
in the templates or the template based pages, edit and publish the
page with Contribute - then the page is saved normally, with the
includes intact and not embedded within the page. This is of course
not necessarily desirable!
I have tried using various types of include directives like:
<?php include('footer.inc'); ?>
<?php require('footer.inc'); ?>
<?php virtual(footer.php'); ?>


All Includes are merged into the template-based page after
the page has been edited and published with Contribute - if they
are in "non-editable regions"!
Please, someone point me in the right direction - if it's
calling Adobe's Help line, or posting the files or whatever. I
can't finish this project and hand off to the client until this is
resolved.
Andrew

Hi,
I'd be reall interested to know if you got anywhere with this as I'm having the same problem.
The article referenced further down this thread is no longer available either.
Any suggestions or advice on this issue would be much appreciated.
Cheers,
Bill

Document ID - Property field shows on item view property page after deactivating the Document ID Service features at Site Collection level

Hi,
When a site collection was created, I enabled the Document ID feature at site collection level. Then some item was created in a document library as well as list libarary
Now it was decided that we dont want the Document ID feature so I disable the feature from Collection feature list
Still when a user view the property of a document it shows the Document ID property with the ID (when click on the ID it shows the message that
This Site Collection is not configured to use Document IDs.
Troubleshoot
issues with Microsoft SharePoint Foundation.
Correlation ID: 9640ac9f-4b9c-4ae8-9f0b-402ed7e3b3c5) Is there anything that I should do so that DOcument ID property does not show on the document property page... I tried
to looked at the content type to see if I can remove the document ID but I could not find the Document ID as a property that can be removed from the type

Hi,
I would just remove the column from the view. You can make views for each list, it you look under the list by Clicking List while the list is open, you should see a link in the ribbon which say "Modify view" click this link.
This link will open the edit view page you can then uncheck the box for the column which will remove it form that view.
According to this
http://msdn.microsoft.com/en-us/library/ee559302.aspx
Deactivating the feature removes links to the Site Collection Settings page, makes the page that is used to look up document IDs no longer available, turns off the document ID service, and stops assigning document IDs. The server does not remove the columns
that it adds at the site level when the feature is first activated so that, even after deactivation, the existing document IDs are preserved. After the feature is deactivated, users who try to use a static URL to look up an item by its document ID see an error
message indicating that "This Site Collection is not configured to use document IDs."
The Document id service will add new columns to the document content type and the document set content type.
It also adds an event receiver which should be deactivated when you deactivate the doc id service.
Theoretically. You should be able to go in and remove the columns from the document type, and then force an update.
Thanks,
Rock Wang
Rock Wang TechNet Community Support

Sharepoint Foundation 2010 / IE11 Error when loading aspx page

Sharepoint 2010 throws an error anytime a user tries to access a specific page (instead of the main URL share.domain.com) through IE11. Chrome appears to be uneffected. It's driving me crazy trying to figure it out. It's also effecting One Note as we're
no longer able to sync with Sharepoint hosted OneNote documents.
Does not work:
http://share.domain.com/Lists/Digital%20Marketing%20%20Tasks/AllItems.aspx
http://share.domain.com/IT%20Wiki/Home.aspx
Does work:
http://share.domain.com/Lists/Digital%20Marketing%20%20Tasks/
http://share.domain.com/IT%20Wiki/
Here's the error from the logs:
Timestamp
Process
TID
Area
Category
EventID
Level
Message
Correlation
10/22/2014 11:50:15.63
w3wp.exe (SERVER_NAME:0x0714)
0x1BD8
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Name=Request (GET:http://share.domain.com:80/IT%20Wiki/Contacts.aspx)
a5c139bd-0232-4164-871e-c5687343b897
10/22/2014 11:50:15.63
w3wp.exe (SERVER_NAME:0x0714)
0x1BD8
SharePoint Foundation
Runtime
tkau
Unexpected
System.InvalidOperationException: Operation is not valid due to the current state of the object. at Microsoft.SharePoint.WebControls.SPControl.EnsureSPWebRequest(SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
a5c139bd-0232-4164-871e-c5687343b897
10/22/2014 11:50:15.65
w3wp.exe (SERVER_NAME:0x0714)
0x1BD8
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://share.domain.com:80/IT%20Wiki/Contacts.aspx)). Execution Time=13.1097
a5c139bd-0232-4164-871e-c5687343b897

HI Shaun,IE11 is having some know issues with the share point.Make sure the IE (Internet Explorer) Version should be 32-bit and not a 64-bit.
http://expertsharepoint.blogspot.de/2014/08/issues-with-sharepoint-2013-and.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Safari reloading previous page after pressing the back button

Hey guys, here my question regarding Safari...
Why is it that every time I do the two finger swipe on the trackpad to go back to the previous page I was viewing on the web, freaking Safari takes me back to that page instantly but then automatically reloads the page. WHY?!?!
I don't have this issue while using Firefox. I swipe to go back to the previous page and it's instantly available for me to continue browzing / scrolling, etc.
Another thing I noticed in Safari is that if I'm half way down a page and click on something, which takes me to that page but then I swipe to go back, it doesn't take me back to where I was on the page (say, half way down, for example) it take me up towards the top (not all the way at the top, mind you, just up higher, NOT WHERE I WAS WHEN I LEFT THE PAGE) Why does it do this?!?! You'd think that Apple would have designed Safari to be the next best thing since sliced bread and that it would work instantly and flawlessly. I'd imagine that Firefox and other browzers would be the ones taking forever to load but it's freakin Safari that is doing this, I don't get it.
For the record, Firefox functions flawlessly. Instantly shows the page I was at when I press the back button or swipe back and it puts me BACK IN THE SAME SPOT THAT I WAS AT BEFORE I LEFT THE PAGE!!!!
I use both browzers as I need two (use both for different things and have different bookmarks saved, etc) but I'm starting to HATE Safari simply for this one issue I'm having. It makes surfing the web take 2x as long as I not only have to wait for the page to RELOAD after pressing the back button, I also have to scroll back down to where I was before I left the page, which takes TIME!
Someone please explain this to me. I looked at other posts regarding this issue but there is no clear solution to the problem.
HELP.

I think Apple should give the end user the choice whether to autoload the webpage when you press the back button or not. It would be a simple fix for this issue that it seems a lot of people are suffering with.
I WANT to use the default web browser that my Macbook Pro came with (Safari) and don't really want to use the alternatives (Firefox, Chrome, etc) but surfing the web is a slow, time consuming process with this auto reload "feature".
Apple, Please fix this ASAP!
This is my first Apple laptop (was a long time Sony Vaio / Windows user) and I expected good things from my Mac, after hearing / reading all the reviews but this Safari issue is a MAJOR turn off for me. It needs to be address ASAP.

Error while saving a Sales Order in the CRM Mobile Application

Hi,
I am facing issues while saving a Sales Order in the CRM Mobile Application. I am getting the error message "Value Field KvLangu is not valid (Error: 236 / 1102)".
I would be very grateful if somebody had faced this issue before and this way could help me with some information.
Best Regards,
Rogerio Prado.

Hi Rogerio,
You should put mobile sales related messages in the forum "CRM Mobile applications"
This error message is coming because the language table SMOT002 might be empty in your mobile client OR it does not have all the values which have been customized in the system.
You need to have subscription based on publication "customizing objects" assigned to your site.
Regards
Vivek

Opens Webmail login page instead of sso login page after changing the webma

Hi Gurus,
I have setup notes webmail in portal which uses SSO. I login to portal and click the webmail link which opens the sso page for authentication(Cuz I have integrated the webmail to use SSO). I enter my username and password. Then it shows my emails, inbox..etc. I logout of portal, Go to Notes client on my PC and change my webmail password there. I go back to portal and log in and click the webmail link on the portal. Cuz I have changed the webmail password, I expected that it will open the SSO page and ask me to enter the password again. It didn't happen. Instead of opening eh SSO login page, It opens the Webmail login page with an error saying "Invalid User Name or Password". I am wondering why it opens the webamil login page instead the sso login page. I can still login to webmail If I enter the user name and new password. But it doesn't update the webmail password which is stored in the SSO. Please post a reply if you have some idea about fixing this.
Thanks
Raj
-------------

Hi Gurus,
I have setup notes webmail in portal which uses SSO. I login to portal and click the webmail link which opens the sso page for authentication(Cuz I have integrated the webmail to use SSO). I enter my username and password. Then it shows my emails, inbox..etc. I logout of portal, Go to Notes client on my PC and change my webmail password there. I go back to portal and log in and click the webmail link on the portal. Cuz I have changed the webmail password, I expected that it will open the SSO page and ask me to enter the password again. It didn't happen. Instead of opening eh SSO login page, It opens the Webmail login page with an error saying "Invalid User Name or Password". I am wondering why it opens the webamil login page instead the sso login page. I can still login to webmail If I enter the user name and new password. But it doesn't update the webmail password which is stored in the SSO. Please post a reply if you have some idea about fixing this.
Thanks
Raj
-------------

How to remove data from page after submitting the page?

Hi,
I am using API to create person record.After submitting the create page the data are still
showing on that page.
How to remove data after submitting the page?
Please suggest.
Regards,
Sagarika

Abdul,
Your solution is perfect if the UIX beans on the page do not have BC4J binding with a VO attribute, otherwise, Sumit's soution is appropriate.
--Mukul

Cap5: User must get a certain page after closing the browser page in the middle of a quiz

Captivate 5, Output Flash10, LMS Cornerstone, majority of the users use IE7.
The 10 quiz pages (always followed by 2 text pages ---> 30 pages) do not have TOC activated. So there is no bookmarking.
Sequence:
40 text pages --- 30 quiz pages --- 10 additional pages linked from buttons of the first 40 text pages.
If the user closes the browser page in the middle of the quiz, no bookmark was set.
When he starts the module again, he would just see the message "Loading".
I'd like to open the module and lead the user to the beginning of the quiz.
Any ideas?
freddy209

Hi Freedy!!
I think I have seen this before. Please try the following solution :
http://helpx.adobe.com/captivate/kb/projects-published-captivate-5-lms.html
You need to replace your CPSWF9Template.dll from the installed location. Be careful to choose the one meant for your Captivate version.
Thanks,
Anjaneai

Problem occures after editing the JTable....

Before understanding problem, let understand my logic first --
I m writing code for 'find' functionality, which works exactly same as find (ctrl+f) in any document or table...
- In my case I m applying it on JTable it follows the steps bellow .
- Enter word to search in a GUI & click on find or find all
Internal working as :---
- take JTable instance..
-pass it to function which detects the occurrence of 'search word' in a JTable cell.
- save rows & columns no. of all occurrences in a vector
- pass the vector to cell renderer, which ll high light the occurrences with blue color.
- update table UI using "table.updateUI()".
Now my problem is :--
The code works fine & doesn't gives any problem until I do not edit the cell of JTable displayed on screen...
If I edit the cell & then try to search a particular word in the table then it ll not work properly & shows message "Word not found".(Which actually displayed if the word count is zero in the table).
Code is too large so I am not pasting here....
Any suggestion or clue will be appreciated....
Thank you very much in advance
Suyog

Code is too large so I am not pasting here....If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html]
that demonstrates the incorrect behavior, because I can't guess exactly what you are doing based on the information provided.
Don't forget to use the [Code Formatting Tags|http://forum.java.sun.com/help.jspa?sec=formatting] so the posted code retains its original formatting.

SharePoint 2010 search error on searchadministration.aspx page in Windows Server 2012

Hi,
I am facing the below error on when I click on any of the page under the Search Serve
System.ArgumentException: Could not find the sitemap node with URL '/searchadministration.aspx'. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP._admin_search_listcontentsources_aspx.ProcessRequest(HttpContext context) at ... 29b1b089-c6d3-4276-aeba-c1fb063c524b
08/12/2014 10:48:36.04* w3wp.exe (0x538C) 0x0244 SharePoint Foundation Runtime tkau Unexpected ...System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 29b1b089-c6d3-4276-aeba-c1fb063c524b
08/12/2014 10:48:36.04 w3wp.exe (0x538C) 0x0244 SharePoint Foundation Monitoring b4ly Medium
I got the correlation ID and upon checking this was the error that I got.

Hi Cally,
As I understand, you encountered the issue when you accessed Search Service Application.
Did you install any updates recently? Does it work before? Could you find more related error message?
Please go to CA > Application Management > Manage service on this server, restart search service. Then go to Services.exe on the SharePoint machine, and restart SharePoint 2010 Timer and SharePoint Sever Search 14 services.
In addition, here is an article with similar issue for your reference:
http://akifkamalsyed.wordpress.com/2008/09/19/errors-after-installing-infrastructure-update-for-moss-2007/
Regards,
Rebecca Tu
TechNet Community Support

Error when saving a page

Hi everyone...
I get this Javascript error everytime I save a web page. I
click Save As and then this appears...
"While executing onLoad in _afterSave.htm, the following
JavaScript error(s) occurred:
In file _afterSave:
ReferenceError: afterSave is not defined"
...then I click "OK" ...then it appears again. So I have to
click "OK" again. And then it's saved.
I hate having to do this everytime I save a page.
What's causing this error?
Please help if you can. Thanks guys!
drewC

drew7873 wrote:
> I found my Dreamweaver 8 folder...that was no problem
but finding the actual
> MacFileCache.dat file is impossible as I can't find it!
Are you sure you're looking in your *user* configuration
folder?
Dreamweaver 8 has at least two configuration folders: one for
the main
program (which you shouldn't alter), and one each for every
user account
on the computer. It's the one for the user account that
contains
MacFileCache-********.dat.
Have you tried searching your hard disk for MacFileCache?
If you still can't find it, the (more aggressive) cure is to
delete the
*user's* configuration folder. This resets everything in
Dreamweaver,
including wiping out all installed extensions, so should be
used only as
a last resort.
David Powers
Adobe Community Expert, Dreamweaver
http://foundationphp.com

Error in saving .aspx pages after editing the XSLT

Similar Messages

Maybe you are looking for