Error in Saving Description of Task

Hi @ all,
i´ve got a curious phenomenon.
If i create a task in an Collaboration Room or via CLP i cannt save the description of the task.
The Rest of the task is saved normally.
Any ideas?
Greetingz
Larz

Hi Lutz,
Stack 19 solved this problem. Hope, it works...
Olli

Similar Messages

Error while saving Type of Task in POSDM

Hi Frnds,
In PIPE IMG , Under one step processing --> task , and for the Profile type 0001 , and Task Code 001
( Supply BW Immediately, Non-Aggr., w. Distribution) am changing the " Type of Task " from "No processing " to " Immediate processing " , it doesnot allow me to save it and throws a message saying " Do not make any changes (SAP entry) " . Pls advise how to go about it.
Also am not able to make my own Zprofile.
Thanks
Prasad

You can create copy of Profile Type (say Z100) & Task Code (say Z001) and you can use those for further processing. Try and avoid using the standard ones, if you want to customize.

Error while saving the FM8 XML file

Hello,
While saving the FM8 XML file, an error message appears (see attached screen shot).
Is there a solution to resolve this issue? Please suggest.

Hi,
This type of error is non-descript and could be caused by any number of things. It is impossible to troubleshoot from here based solely on that message. Let me ask a couple of questions, though:
- Are you using structured FrameMaker? If so, are you using a structured app that has worked successfully before? In other words, did this just suddenly start happening to an otherwise-stable process?
- Is there anything unusual about your layout; that is, anything other than a single text flow with graphics?
Russ

Error in transporting WF workflow task

Hello,
I face an error when moving WF workflow task from Dev to QA.
System is 4.0B.
The QA transport log shows (errors in bold):
Subsequent processing RH_ACTIVATE_PDOBJECT_AFTER_IMP for PDWS T started at 20:23:01
Time... 20:23:02 Run time... 00:00:01
Start activation of object WF 91000095 (client: 100) 202302
Error while activating
Time... 20:24:00 Run time... 00:00:58
Errors occurred during post-handling RH_ACTIVATE_PDOBJECT_AFTER_IMP for PDWS T
Post-handling RH_ACTIVATE_PDOBJECT_AFTER_IMP belongs to development class SP00
The errors affect the following R/3 components:
 BC-BMT-OM (Organizational Management)
In QA, the new version of the WF - created and activated in Dev - does not appear at all. I checked OSS Note 138411 - Collective note: PD Transports and OSS Note 88180 - Error during import postprocessing (Org.unit) but they didn`t help.
In Dev, the new version of the WF was saved and activated and manually inserted in a customizing request from tr. PFTC. The transport included object R3TR TDAT PDWS with entries for HRP, HRT and SWD_* tables, with records for the WF task.
Any help would be appreciated.
Thanks and regards,
Krisztian

Hi Ravi,
WS and TS tasks are recorded in changes, only the WFs and Ts are not. This is because some Personal Development objects are not to be transported, hence automatic transport connection for these is deactivated in IMG. Since WFs and Ts are considered as PD objects, the automatic transport is deactivated for them as well. For WFs and Ts manual transport is available in PFTC.
This is unfortunate but this is how it`s set.
On the other hand, version management is not something that works too well for workflows anyway (at least in 4.0B). You can`t see the differences in two separate versions like you would in a program. And in WFs and Ts you are able to generate versions just like for WSs and TSs for version management. So from my point of view manually transporting WFs and Ts are not the issue. But I may be wrong...
Nevertheless I activated automatic transport connection and did a change in Dev like that. The transport created was moved to Acc, but still same problem...
So I`m running out of clues.. maybe I just overlooked something...
Thanks
Krisz

I am getting error while saving new WORKFLOW

Dear All,
Please help me for the following issue.
I am trying to make new WORKFLOW but system gives a ERROR while saving from SWDD tcode.
error is:
System error: Function cancelled
Message no. WD255
Regards,
Mukesh

Hi Mukesh,
You have to maintain the Prefix numbers in the system, in tcode SWU3 --> maintain definition environment --> Maintain prefix number --- > click on execute button.
There, create a new value for your client(XXX) system to generate the workflow definition / task definition.
Regards,
Murali Krishna.

Error while saving Long Texts

Hello
We are using SRM7 Extended classic scenario.
We don't use shopping carts, rather create POs directly in SRM which will be transferred to ECC as per the standard.
Error:
I am getting an error "Error while saving Long Texts" during my PO creation. I get this message in a small pop-up screen. As soon as i click ok or close the pop up screen it kicks me out of the PO creation screen back into the main SRM screen.
When:
During the PO Creation
Any specific situation:
Yes, only for Material POs
This is happening when I am creating the PO with a Material code. I can create free text PO without any issues.
This is a standard message and the message number is 022.
Thaks for the help guys.

Hi,
To confirm can you check commeting "getOADBTransaction().commit();" gives any error message?
If yes then you can try the following option:
Have you checked whether the "/" is changed to "\" in the dbc file?
In the following two entries the slash has to be made as shown below:
APPS_JDBC_URL=jdbc\:oracle\:thin\:@(DESCRIPTION\=(ADDRESS_LIST\=(LOAD_BALANCE\=YES)(FAILOVER\=YES)(ADDRESS\=(PROTOCOL\=tcp)(HOST\=10.100.503.6)(PORT\=1521)))(CONNECT_DATA\=(SERVICE_NAME\=VIS)))
JDBC\:processEscapes=true
Thanks and Regards,
Lacman

Error when reassigning a custom task process

Hello!
I have an error when reassigning a custom task process.
That is what I see at the workflow history: Task assigned to xxx was delegated by xxx. Coments: xxx
However in the second line of the history an error is shown with the following information:
Event type: error
User ID: System account
Description: An error has occurred in nameofthetask
No new task is created for the user who the task was reassigned to.
Any help would be appreciated

Hi，
From the error message， I
guess that you come across an OOTB Approval
Workflow.
When you define your workflow, there is a section "Enable content Approval Workflow Activities", where you can check "Update the approval status after the workflow is completed (use
this workflow to control content approval)". If you check this option, and you do not have content approval enabled on the library level, you get the system account error message. If you do not check it, everything works fine.
Or you can go to the document library settings and go to Versioning Settings Page, set "Require content approval for submitted items to?" to yes and everything should be fine.
Refer to the following blogs about the similar issue:
http://mossnwss.blogspot.com/2008/10/workflow-error-system-account-error-has.html
https://sharepointtechs.wordpress.com/2011/11/18/workflow-error-an-error-has-occurred-in-approval/
Besides, here is a similar post, you can use as a reference:
https://social.msdn.microsoft.com/Forums/en-US/fff5ee1f-904b-4a95-989f-c5a079cdf666/workflow-error-system-account-an-error-has-occured-after-workflow-completed-moss-2007?forum=sharepointcustomizationlegacy
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

WCM Error while saving Project

Hi,
I am getting following error while saving new created project in cProject.
Saving is not possible because the WFM Core data could not be adjusted
Message no. PRP086
Diagnosis
When checking the project role or project role staffing, differences to the related WFM Core data were found. The project cannot be saved because the data cannot be adjusted. Possible causes for this include:
The WFM Core is not installed locally. When working with the application, the WFM Core service is suddenly no longer available.
The WFM Core configuration has been changed in Customizing.
The WFM Core is only activated after projects have been created. During the automatic adjustment of data, it is determined that resources unknown in the WFM Core are assigned to existing project role staffing.
When working with the application, an existing resource already assigned in the WFM Core is deleted.
System Response
The project cannot be saved.
Procedure
Contact the system administrator if the required resource is not known in the WFM Core. The project can be saved as soon as the resource is created.
Let me know how to resolve this issue??
Thanks in advance,
Atul.

hi Atul,
Are you using WFD server for your resource planning in cProjects???
If yes, you have to do settings in customizing for the same in Workforce deployment server under Resource Management in cProjects.
If not, then do following settings to remove the error you are getting:
1) SPRO -> Collaboration Projects -> Resource management-> Business Partner-> Set Up Integration of HR,
Maintain following setting:
Group Sem. abbr Value abbr Description
HRALX HRAC X Activate HR Integration
2) SPRO -> Collaboration Projects -> Resource management Qualification Management-> Activate Qualification Search and Matchup Using WFM Core
In this, deactivate the use of WFD Core for the qualification match up and the search by deleting the X under Value abbr. in the activity Activate Qualification Match up and Search Using WFM Core.
Hope this will be helpful to you.
Regards,
Niraj Sikligar

Update error while saving quotation

update error while saving quotation - express message
Error reads as "device type sapwin"
When the print option send immediately (option 4) in the printer configuration the error is coming and the document is not saving due to update error.
When the print option is send with own application (option 3) in the printer configuration the document is getting saved.
we want to run with option 4. could some one show some light on this problem.
regards
VS Arava

From the description the job is trying to print to a frontend printer. Try sending the job to another printer. Or print to LOCL. This will send the spool to your local default printer.
I suspect there is a network issue related to the printer set up.
when you use option 4 the error gets hit immediately. Option three is waiting to print later, the error does not likely show up until later when the job is actually printed.
Check the printer config..

Variable is used in description text Task description, but does not exist

Hi,
I am getting following error in the standard task 207914 ERMS_DECSN.
Workflow Error
Variable &REQREQ.REQUISITIONERUSER.ITSDESTINATIONSY& exists in description text Task description, but not in the container
Message no. 5W146
Diagnosis
Variable is used in description text Task description, but does not exist in the container.
System Response
The task could cause workflow errors.
Procedure
Correct description text Task description or add the variable to the container.
Can anybody please guide step by step process to correct this error.
Regards,
Deepak

Hi Deepak,
I face a similar issue,Task description contains an element which is available in container, but during Check, it throws below error.
Variable &ZINFO.REASON& exists in description text Task description, but not in the container
but variable "&ZINFO.REASON&" is not accessed in Task description.
suggest any ways to check the binding or adjust binding between workflow/task.
Please provide a solution to fix this error or advice if this error can be ignored?

APP-AR-11526 ERROR WHEN SAVING ADJUSTMENT IN AR RECEIPTS FORM

제품 : FIN_AR
작성날짜 : 2003-04-25
APP-AR-11526 ERROR WHEN SAVING ADJUSTMENT IN AR RECEIPTS FORM.
==============================================================
PURPOSE
Problem Description
Receipt화면에서 Adjustment를 하고 Save버튼을 누를때,
APP-AR-11526 arp_process_adjustment.insert adjustment exception ORA-20001
위와 같은 에러 발생.
Workaround
select taxable_amount
from RA_CUSTOMER_TRX_LINES_ALL
where customer_trx_id = 문제가되는 transaction id
and line_type='TAX';
NULL
Update RA_CUSTOMER_TRX_LINES_ALL
set taxable_amount = transaction의 원래 금액
where customer_trx_id = 문제가되는 transaction id
and line_type='TAX';
Solution Description
RA_CUSTOMER_TRX_LINES_ALL의 taxable_amount값이 NULL인 경우,
invoice 금액 adjustment시 오류가 발생한다.
Reference Documents
-------------------

Pl see if MOS Doc 341469.1 (Adjustment Entry: APP-AR-96027: Tax accounting not defined for the tax code or tax location assigned to this invoice) can help.
HTH
Srini

ERROR: control_updates_flag is null for TASK ActivityID

hi all:
Cannot add new activities when importing XLS into P6 8.2Steps to Reproduce1.Create a test project and create 1 activity.2.Export the project using XLS format.3.Open the XLS sheet add an activity.4.Import the XLS sheet with the newly created activity.5 XLS sheet will not import note the error message in import log.:Excel Import log started : 15-Mar-12INFO: Importing Global Data...INFO: Importing Project Data...INFO: Importing: INFO: Saving: ERROR: control_updates_flag is null for TASK ActivityID: A1010
for excample:
ERROR: control_updates_flag is null for TASK ActivityID: 407CSCAIC0020, Project: N407 - Rev.2.03
ERROR: control_updates_flag is null for TASK ActivityID: 407CSCAIC0030, Project: N407 - Rev.2.03
ERROR: control_updates_flag is null for TASK ActivityID: 407CSCAIC0040, Project: N407 - Rev.2.03
ERROR: control_updates_flag is null for TASK ActivityID: 407CSCAIC0050, Project: N407 - Rev.2.03
ERROR: control_updates_flag is null for TASK ActivityID: 407CSCAIC0060, Project: N407 - Rev.2.03
ERROR: control_updates_flag is null for TASK ActivityID: 407CSCAIC0070, Project: N407 - Rev.2.03
ERROR: control_updates_flag is null for TASK ActivityID: 407CSCAIC0080, Project: N407 - Rev.2.03
ERROR: control_updates_flag is null for TASK ActivityID: 407CSCAIC0090, Project: N407 - Rev.2.03

Hello,
thank you for help me,but this Problem is not resolved.I downloaded the patch,Installation in accordance with the documents:
1.Download the P6Web_8.2.0.1.zip and extract the contents.
2.Make a backup copy of your p6home directory containing your existing 8.2 installation.
3.Copy p6.ear to your 8.2 p6home directory.
4.Update your P6 configuration to the latest version in the P6 Administrator application:a.Run adminpv.cmd or adminpv.sh from your p6home directory.
b.Login as the privileged user (for example, privuser).
c.Right-click on the configuration name.
d.Select Update to latest version.
e.Click Save Changes.
To add P6 as a WebLogic application:
1.Launch the WebLogic Administration Console.
Note: You can open the Administration Console via a web browser using this address: http://serverIP:listenport/console. The default listenport is 7001.
2.In the Welcome window, log in using the user name and password that you created when you created the WebLogic domain.
3.In the Change Center pane of the Administration Console, click Lock & Edit.
4.In the Domain Structure pane, click Deployments.
5.In the Summary of Deployments pane:a.Select p6.
b.Click Update.
6.In the Update Application Assistant pane:a.Verify the the path is correct for p6.ear file.
If you need to change the path, click Change Path and navigate to the directory where p6.ear is located.
b.Click Next.
7.In the Update Application Assistant pane, review the configuration settings you have chosen, then click Finish to complete the update.
To start the P6 application in WebLogic:
1.In the Change Center pane, click Activate Changes.
2.In the Domain Structure pane, click Deployments.
3.In the Summary of Deployments pane, select p6.
4.Verify that the State column for p6.ear shows Active.
5.Logout of the Administration Console.
6.Stop and restart the WebLogic application server.
After the above steps, the new test and found that the import eppm p6 are still having problems after exsl data updates,
To seek your help, thank you

Error While saving a iBot

Hi All ,
I am getting the below error while saving a iBot.
Oracle BI Scheduler Error: [nQSError: 16001] ODBC error state: S1C00 code: 106 message: [Microsoft][ODBC Excel Driver]Optional feature not implemented . at stage of execute transaction command with data source: Procurement_Demo
I am using xls as a datasource to create Repository. I have created scheduler tables for iBot in the same datasource.
Can i not use XLS as a datasource for iBot?
If i can use , what is the solution of this problem.
Thanks in advance.
-- Ashish

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error while Saving the report

Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)

As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.

Error while saving the Sales Order

Hi experts,
i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
Thanks.

I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
If you see what they are, you can check to see what the usages represent. Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc. In our system, we only have A entries.
What are the usages for the 521 entries? Do they relate to Free Goods/Pricing???
Does the table KOTN521 exist in the ABAP Dictionary?
Answering these questions may get you closer to the answer.
Can you compare the values in these entries to what you have in different SIDs?
Is this problem happening in Production, or is it still in a development or Quality Assurance client?
If it is still in development or Q, then it may be that a recent customization change was made.
Compare the entries across your systems, if possible.
Good luck
Brian

Error in Saving Description of Task

Similar Messages

Maybe you are looking for