Error in Sender File Channel

Dear all,
I'm trying to execute a File to File scenario.But I'm getting this error in the sender file channel.
"Putting message into send queue failed, due to: com.sap.aii.af.ra.ms.api.DuplicateMessageException: Message ID a0ff7230-8793-11dc-a4d5-001558e4827d(OUTBOUND) already exists in database: com.sap.sql.DuplicateKeyException: NWMssSQLServer JDBC DriverSQLServerViolation of PRIMARY KEY constraint 'PK__XI_AF_MSG__2B090089'. Cannot insert duplicate key in object 'dbo.XI_AF_MSG'.."
The file is not getting picked, the processing mode is set to "Delete". Please help me out in resolving it.
Any hep would be rewarded.
Regards,
Younus

Hi,
Check whether you have given the filename to other communication channel as well. Because it seems to execute another interface where you have a JDBC been used.
If so change the file name in CC and in your file and check it once again.
Regards,
Nithiyanandam

Similar Messages

Sender File Channel unable to process

Hi,
I have a scenario where we are using a sender file channel. It polls every 1 hour at the source directory.
Suddenly yesterday the channel stopped processing and never polled again automatically.
It started the processing but did not finish the processing. (There is no error)
Now when I manually restart the channel it directly goes to the polling interval and gives the log :
"Polling interval started. Length: 3600.0 seconds" every 1 hour. It does not start the processing of channel.
As an additional information I checked that the Server to which it is polling had some error at the time when it stop processing.
Please help how could I start the channel processing now? Is there some kind of lock issue or anything else.
Thanks,
Vikas

Hello Vikas,
In addition to the previous posts, check the following as well.
1)
As I donu2019t know which SP level your system is on, please check the note below and apply the patch accordingly.
> 1317686 - Adapter Framework Scheduler may fail to remove a job
2)
Check whether you have deployed on your system the patches described in this note (as as mentioned in the post above).
> 1083488u2013 XI FTP/JDBC sender channel stop polling indefinitely
3)
Please check if there are locks (as as mentioned in the post above) for this channel according to section u201CHow to manually delete hanging Enqueue-Locksu201C in note:
> 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter
Follow the instructions and delete the lock related to the stopped communication channel.
For the 7.1 versions, please note that the Lock Manager is under the /nwa/locks, or on the location "Availability and Performance Management -> Locks".
4)
Configure a timeout for the FTP connection.
In more recent support packages you can set the "Timeout" parameter available in the "FTP Connection Parameters" section.
Alternatively, please enable the "Advanced Mode" for the respective FTP communication channel in the Integration Directory and add an entry "ftp.timeout"=timeoutSecs (without any quotation marks) to the "Additional Parameters" section, where timeoutSecs is the desired FTP timeout in seconds.
Please refer to the note below for further details on this.
> 849089 - XI 3.0 / PI 7.0 File Adapter: FTP Timeout Handling
Cheers,
Jorge Eidelwein

Cluster node (1 out of 6) is in error for a file channel - SAP XI

Hi,
In one of a sender file channel for an interface, one java node out of 6 configured ones failed. The error message says "Login Incorrect" while the other cluster nodes are polling properly. I have tried to update the password in the channel's configuration in Integration Directory and activated it. This doesnt help. Please advice!
Thanks in advance!
Regards,
Kumaran

Hello Kumaran,
The status of the file adapter is not reflected properly but this should not have an impact. No message might have arrived at that node yet. Once it receives a message for processing, the status will be changed.
Anil

Multiple Archive directories in Sender file channel

Hi Experts,
My requirment is to have multipple archive direcotories in Sender file channel.
We have multiple source dirs e.g.
c:/abc/
c:/bcd/
c:/cde/
and we want to archive the files from these source dirs to corresponding archive directories e.g.
c:/abc/archive
c:/bcd/archive
c:/cde/archive
I can see that we can have only 1 archive directory when the processing mode is kept as "Archive"
How can we achive the same , Please help
Thanks in Advance,
Jyoti

Hello,
I guess you don't have option to archive files in different directories using single CC.
You can archive the files in 1 directory and then run a OS script, which will place the files in different directories (using NFS as protocol).
Some reference:
http://wiki.sdn.sap.com/wiki/display/XI/SAPXIFileAdapterOSCommandLine+Feature
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/10392. [original link is broken] [original link is broken] [original link is broken]
-Rahul

How to raise Alerts for Sender File Channel

Hi All,
For Sender File Channels , we can find out the status of the adapter through RWB as to whether it is Content Conversion related exception or Folder path not found exception & etc .
I wanted to know as to whether there is any way where can rasie alerts for Sender File Channels (similar to what we do for Reciever File Channels) as well.
Regards
Vinay P.

I found it myself .
In Alert Configuration while we are adding alerts for a particular aler category , the following parameters needs to be checked .
Connected to Message : Not Relevant
Sender Service/Party/Interface/Namespace needs to be mentioned.
Adapter Type should be selected as File

Sender file channel in DLNG mode when ICO used

Hello All,
I am working on SAP PI 7.4 version Dual stack installation.
As part of Inbound Interface development, Operation mapping has been included in Integrated Configuration Object (ICO). But when tried to execute the Interface the sender File communication channel always into Delivering mode DLNG and it never went to DLVD mode while reading input file.
Hence I have followed the traditional approach of by creating all configuration objects RD,ID,SA,RA in place of ICO. Now the communication channel is able to read the input file successfully.
Can any one please tell me the reason behind this issue
Note : There were no changes/corrections made to the sender file channel.
Thnx&Regards,
Moorthy

Hi naresh,
Check the communication channel montiring tab ,give the channel name and see whether able to ping the destination and down you can see logs as well.
Regards,
Loordh.

.csv file Vs .txt file Content conversion sender file channel

Hi Experts,
I have a file with filename say input.csv.I want to do content conversion for these .CSV file.Is it same like we have to do for .txt file say input.txt.
when i open my .csv file in notepad, i get multiple rows with each field separated by ';'.what are the content conversion parameters we have to define for .csv file and can we mention input.csv as the file name as a source file name.
Thanks
Deepak

Hi,
Use the following parameters for Sender file channel in case of reading .csv file
Recordset Structure.fieldSeparator -
Recordset Structure.endSeparator -
'nl'
Recordset Structure.fieldNames -
provide field names separated with ,
Regards
Seshagiri

BIC Module Error in Sender Communication channel for EDI to File scenario.

Hi Experts,
We are working on the EDI based scenarion where EDI files come to SAP PI from partner and then through Split 997 Adapter Func Ack is sent back to the Partner . But we are facing a issue in our sender Communication Channel which is a File Adapter Channel and uses BIC Module for the conversion of EDI to XML .Request if any one can provide any guidance on the below issue coming in sender CC.
Error: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: EdiSegmentData read(): Edifact Format not correct : segment must end with \"segment delimiter\" (Segment : ISA). DESCRIPTION: EdiSegmentData Error: Your Edifact Format is incorrect the segment must end with \"segment delimiter\". check segment [not specified]. Last error: InhouseDocReader moveNext(): com.seeburger.jucon.dochandler.AnsiX12DocReader, offset[92(read Segment : ISA)]: could not parse segment (wrong format): EdiSegmentData: Edifact Format not correct : segment must end with "segment delimiter" (Segment : ISA) DESCRIPTION: InhouseDocReader Error: [not specified] at position [not specified] could not parse the segment [not specified] Error while reading description - wrong format.
Thanks & Regards,
Abhishek

Hi Abhishek,
Is there any special character present in the EDI file?
the parser is not able to parse the data.
you can check the BIC conversion log for more information.
Regards,
Harish

Sender File channel error

Hi Experts,
We are getting the below error in the File sender channel.
Error: com.sap.engine.interfaces.messaging.api.exception.MessagingException:24
This error we are getting for one specific File Channel. Other File channels are working fine. 1 message is also picked up by this channel but everytime it shows the same message id and the error.
Please let me know how to fix this.
Regards,
Shaibayan

Hi Shaibayan,
Kindly check for detailed logs in NWA for this channel.
Also if possible try to collect logs from XPI Inspector tool, more details can be found in below OSS note:
1514898 - XPI Inspector for troubleshooting XI
Regards
VJ

Archive file with errors in sender file adapter not working! please help!

Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopal

and go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Error in sender file adapter: source directory does not exist

Hi,
The PI system is 7.11
I've created sender file adapter with following details:
Transport Protocol : File System
Source directory: /interfaces/In
I checked in AL11 that this path really exists and it does. (I can even see the .txt file that should be processed.)
But still i get in Communication Channel Monitoring the following error:
"Configured Source directory "/interfaces/In" does not exist.
(i also tried to give the source directory as "interfaces/In" and as "//interfaces/In" but still the same error.
Any suggestions as to what is wrong?
kr
Robert

Actually, Need to use forward slash (/) to separate directory names in accordance with the Java specification.
But wanted to try if that works..
Also check directory name , path again as this is case sensitive...
--Divyesh

Error in sending file using FCC

Hi all,
i am doing the file content conversion scenario from saptechnicalcom
my message type is as follows:
MT_File_Cont_Conv
     Record
        Emp_Header
          Key
          Emp_Id
          Emp_Name
File is not picked up by the sender file adapter and in RWB communication channel monitoring i am getting the following error:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'Emp_Header.keyFieldValue': no value found
anybody plz provide me some input to rectify this error
regards
sandeep sharma

>
sandeep sharma wrote:
> hi
> FCC parameters are as follows
>
> Document Name:                    MT_File_Cont_Conv
> Recordset Name:                      Record
> Recordset Structure:                   Emp_Header,1
> Recordset sequence:                    Ascending
> Recordset per message:                 1
> Key Field Name:                         Key
>
>
>
>
> Emp_Header.fieldFixedLengths                   1,6,10
> Emp_Header.endSeparator          'nl'
> Emp_Header.fieldNames          Key,Emp_Id,Emp_Name
> Emp_Header.keyFieldValue                      1
> Emp_Header.keyFieldInStructure                 ignore
make sure there is no white space before or after
Emp_Header.keyFieldValue and also the value 1
Even a single whitespace can cause an issue

Error in sender communication channel

Hi,
I am doing File to RFC scenario in which i am using Standard bapi to get the cost from the sap system
while sending the data in sender communication channel the processing mode is in delete mode but it is not deleting and throwing the error
Error: com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
this error is from sender communciation channel..
can any one give some inputs for this...
regards,
Kishore

K.P.N.,
i have checked it getting the same error. in moni also administrative cache clear error is coming
do we need to do any workaround...
regards
Kishore

Error in Receiver File Channel...in MTB module (Urgent)

Hi,
I am working on a Proxy to File scenario. I am using Message Transformation Bean in receiver file channel to convert xml file into fixed length file. I am getting an error : Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: java.lang.Exception: Exception in XML Parser (format problem?):java.lang.NullPointerException'; nested exception caused by: java.lang.Exception: Exception in XML Parser (format problem?):java.lang.NullPointerException
in MTB step of audit log for comm channel.
Please help me resolve this.
Thanks,
Jaya

Hi ,
"Transform: failed to execute the transformation:"
Pls check ur data what u have to send .. any missing information or any special Chacters or any extra fields are available in the data, this type of transformation error raised.
check once again ur mapping transformation and test the mapping in INTEGRATION REPOISTERY with the same data(what u have to send Previously).
and also check ur adapter status in RWB.
Regards,
Sateesh N.
Edited by: Sateesh N on Apr 21, 2008 1:53 PM

Error in Sender SFTP channel[URGENT]

Hi Experts,
I am getting the following error in my sender SFTP channel , i am using seeburger module in Sender channel :
Error type: TASK_ERROR >> Error date: 10/20/11 8:00 AM >> Description: File <O1110200610ZRFEDATA> could not be polled from directory </GFS/Application_Development/F/Outbound/Data> on host <mxgfudp>; Reason: Error occured while creating callback task. [10/20/11 8:00 AM]
Error type: COMPONENT_ERROR >> Error date: 10/20/11 8:45 AM >> Description: Could not add or update entry for filename <O1110200508ZFGLOUS_WBS_> [10/20/11 8:45 AM]
Can some one tell what can be the root cause for this error , these channels were working fine till yesterday.

This issue occured because of the less space on disk of production server , one the space is created the error got resolved

Error in Sender File Channel

Similar Messages

Maybe you are looking for