Error in Sending the data
Hi Experts,
When I am trying to send the data through Input Schedule.Its rejecting all the data and giving error message as
"The current members are locked."
Anyone can please suggest the solution.
Thanks in advance
Regards,
Prakash
Hi,
Kindly check whether the Work Status has been changed for the CV for which you are trying to enter the values. In addition to this, validate the concurrent locks also for your application in BPC Admin.
Hope this helps.
Similar Messages
-
Error while sending the data using input schedule
Dear Friends,
I am unable to send the data using input schedule due to following error is occur while sending the data.
The Error Message : Member (H1) of dimension (ENTITY) is not a base member (parent or formula)
Can anyone please help me to resolve the above error.
Thanks and regards,
MD.Hi,
You are trying to send data to a parent/node, you can only send data in BPC to lowest-level children (base mamabers) of any dimension.
"H1" is a parent in the entity dimension so you should try sending to a child.
Tom. -
Problem sending the data into XI through webservice
Dear All,
I am getting an error while sending the data into XI after hitting my webservice.
SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header>
</SOAP:Header>
<SOAP:Body>
<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Error during conversion of XI message</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail>
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSER">UNEXPECTED_VALUE</SAP:Code>
<SAP:P1>Main/@versionMajor</SAP:P1>
<SAP:P2>000</SAP:P2>
<SAP:P3>003</SAP:P3>
<SAP:P4/>
<SAP:AdditionalText/>
<SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack>XML tag Main/@versionMajor has incorrect value 000; expected value is 003
</SAP:Stack></SAP:Error></detail></SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Please suggest what the problem could be.
Abhishek<SAP:Stack>XML tag Main/@versionMajor has incorrect value 000; expected value is 003
</SAP:Stack></SAP:Error></detail></SOAP:Fault>
--> this states as it is version problem
Main/@versionMajor is XI message protocol version
check SXMB_ADM if the system is maintained as XI -
Error while extracting the data in R/3 production system,
Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issueIt´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus -
Unable to send the data entered in sap portal
Hi
All
i am trying to configure and test Leave Request from portal. When, we create the leave request and submit for the first time, it is giving the error/message Unable to send the data entered However, if do a submit for the second time, the same leave request, it sends the leave request.
Please share your valuable thoughts or solutions.Thanks in advance.
Tanks
Rafi ShaikHi Rafi,
We are also facing similar kind of issue.
When i select type of leave as annual it is giving an error message as
" Parameter missing in call of method BUILD_ACTOR_SELECT_CLAUSE in class CA_PT_REQ_ACTOR "
But when i select some other leave type and click review it is working fine, again if i click on previous step and change the leave type to annual it is working fine without giving any error message.
Please let us know how you have solved your issue?
Thanks.
-Suresh -
Error while sending the email notifcation
Hi All
I am getting this error while sending the email notifcation.If any one of you have any idea regarding this please suggest
[2012-09-12T03:55:41.288-10:00] [soa_server1] [ERROR] [SDP-26102] [oracle.sdp.messaging.driver.email] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingdriver-email] Error while writing e-mail message content.[[
java.lang.ArrayIndexOutOfBoundsException: 0 >= 0
at java.util.Vector.elementAt(Vector.java:427)
at javax.mail.Multipart.getBodyPart(Multipart.java:157)
at javax.mail.internet.MimeMultipart.getBodyPart(MimeMultipart.java:256)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.getHeaderEncoding(EmailDriver.java:1079)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.send(EmailDriver.java:670)
at oracle.sdpinternal.messaging.driver.email.EmailManagedConnection.send(EmailManagedConnection.java:50)
at oracle.sdpinternal.messaging.driver.DriverConnectionImpl.send(DriverConnectionImpl.java:41)
at oracle.sdpinternal.messaging.dispatcher.DriverDispatcherBean.onMessage(DriverDispatcherBean.java:296)
at sun.reflect.GeneratedMethodAccessor2553.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy346.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
[2012-09-12T03:55:41.331-10:00] [soa_server1] [WARNING] [SDP-25107] [oracle.sdp.messaging.engine.store] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: OracleSystemUser] [ecid: f5c1f5acbf0bb7a6:22e05768:139ba096e4d:-8000-00000000000006ef,0] [APP: usermessagingserver] Message ID bac38bd50a1f32a129c5c739335a7855 in Status object does not match previously recorded Message ID b7e259a30a1f32a12c981a3ffd343f6d.
[2012-09-12T03:55:41.362-10:00] [soa_server1] [ERROR] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Error status received from UMS.[[
Status detail :
Status type : DELIVERY_TO_GATEWAY:FAILURE,
Status Content : Failed to set message headers: java.lang.ArrayIndexOutOfBoundsException: 0 >= 0,
Addressed to : EMAIL:[email protected],
UMS Driver : Farm_base_domain/base_domain/soa_server1/usermessagingdriver-email:oracle_sdpmessagingdriver_email#Email-Driver,
UMS Message Id : b7e259a30a1f32a12c981a3ffd343f6d,
Gateway message Id : ,
Status Received at : Wed Sep 12 03:55:41 HST 2012.
Check status details and fix the underlying reason, which caused error.
[2012-09-12T03:55:51.492-10:00] [soa_server1] [WARNING] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@3066bad4] [userId: <anonymous>] [ecid: 0000Jau4qHj9Lex_w9w0yW1GK6Rn000003,1:32530] [APP: soa-infra] <.> Could not find notification record corresponding to failed notification : (Channel message id) : b7e259a30a1f32a12c981a3ffd343f6d[[
Hence it will not be retried.
Possible cause could be purging of notification data after sending out notification, but before receiving status.
]]Are you using your email address to send the email notifications if it Is not configured with AD? Have you populated the mail attribute in weblogic console-->realms-->my realms-->users
In addition are you sure you have configured the 'Email Driver Properties' correctly in EM ?? have you specified the Notification Mode to Email ?
Please make sure that the outgoing mail server and port along with the username and password are correct.
Also validate the workflow settings in your EM?
In addition, please validate that when you logon to BPM worklist using the admin account and click on the name for e.g. weblogic, you see the email attribute populated properly.
Thanks
ACM -
RFC error when sending logon data
Hi;
We cannot configure the STMS of our development system. When we try to
configure it, system gives an error message: Errors during distribution
of tp configuration; TMS Alert Viewers tells us
RFC_COMMUNICATION_FAILURE: RFC communications error with
system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
data and READ_PROFILE_FAILED:File
erptest\sapmnt\trans\bin\TPPARAM
could not be opened for reading (No such file or directory).
Is there any advise for solution?
Best regards
Noyan
PS: Please find the profiles below:
START:
#.* Start profile START_DVEBMGS00_erptest *
#.* Version = 000006 *
#.* Generated by user = BASIS *
#.* Generated on = 30.12.2010 , 15:40:55 *
generated by R3SETUP
SAPSYSTEMNAME = FKT
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = erptest
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
start database
#_DB = strdbs.cmd
#Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
start message server
#_MS = msg_server.exe
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start IGS
Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
start application server
#_DW = disp+work.exe
#Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
General parameters for starting the system
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPSYSTEM = 00
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPSYSTEMNAME = FKT
#parameter created by: BASIS 24.12.2007 23:53:27
#INSTANCE_NAME = DVEBMGS00
#parameter created by: BASIS 24.12.2007 23:53:27
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPGLOBALHOST = erptest
Start database
#parameter created by: BASIS 24.12.2007 23:53:27
_DB = strdbs.cmd
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
Start message server
#parameter created by: BASIS 24.12.2007 23:53:27
MS = msgserver.exe
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start applications server
#parameter created by: BASIS 24.12.2007 23:53:27
_DW = disp+work.exe
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
DEFAULT:
SAPDBHOST = ERPTEST
dbms/type = mss
dbs/mss/server = ERPTEST
dbs/mss/dbname = FKT
dbs/mss/schema = fkt
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPFQDN = tr.delta.is
SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
SAPDBHOST = erptest
SAPTRANSHOST = erptest
DIR_TRANS =
$(SAPTRANSHOST)\sapmnt\trans
#DIR_TRANS = D:\usr\sap\trans
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
SAP Message Server for ABAP
rdisp/mshost = erptest
rdisp/sna_gateway = erptest
rdisp/sna_gw_service = sapgw00
rdisp/vbname = erptest_FKT_00
rdisp/enqname = erptest_FKT_00
rdisp/btcname = erptest_FKT_00
rdisp/msserv = sapmsFKT
rdisp/msserv_internal = 3900
rdisp/bufrefmode = sendoff,exeauto
login/system_client = 200
#GUVENLIK PARAMETRELERI
login/password_expiration_time = 90
login/min_password_lng = 6
#parameter created by: BASIS 25.03.2004 08:41:25
rdisp/gui_auto_logout = 10800
#parameter created by: BASIS 25.03.2004 08:37:47
#old_value: 3 changed: BASIS 25.03.2004 08:42:38
login/fails_to_user_lock = 6
#validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
#parameter created by: BASIS 16.06.2007 17:35:41
#old_value: 2
#changed: BASIS 14.05.2008 15:24:55
auth/rfc_authority_check = 1
#otomatik unlocki iptal eder
#parameter created by: BASIS 10.11.2006 17:47:15
login/failed_user_auto_unlock = 0
#AUDIT PARAMETRELER?
#old_value: changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_day = 1996800000
#old_value: 1000000000 changed: BASIS 20.04.2005 17:17:01
#old_value: 0 changed: BASIS 20.04.2005 17:19:12
rsau/max_diskspace/local = 2048000000
#old_value: 2000000000 changed: BASIS 28.03.2005 23:17:11
#old_value: 2 changed: BASIS 29.03.2005 12:09:14
#old_value: 0 changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_file = 665600000
rsau/enable = 1
rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
rsau/selection_slots = 12
#rec/client = ALL
DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
FN_AUDIT = ++++++++######..AUD
#DIL PARAMETRELERI
#Turkish codepage settings
abap/import_char_conversion = 0
install/codepage/db/non_transp = 1610
install/codepage/db/transp = 1610
zcsa/installed_languages = DET
#zcsa/system_language = E
zcsa/system_language = T
zcsa/second_language = E
install/codepage/appl_server = 1610
#OS dependent
abap/locale_ctype = Turkish_turkey.28599
#DIR_PUT = D:\usr\sap\FKQ\upg\abap
*** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/msserv_internal = 3900
#system/type = ABAP
INSTANCE:
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
#rdisp/wp_no_dia = 10
#rdisp/wp_no_btc = 3
#rdisp/wp_no_enq = 1
#rdisp/wp_no_vb = 1
#rdisp/wp_no_vb2 = 1
#disp/wp_no_spo = 1
rdisp/wp_no_dia = 12
rdisp/wp_no_vb = 3
rdisp/wp_no_vb2 = 0
rdisp/wp_no_enq = 1
rdisp/wp_no_btc = 3
rdisp/wp_no_spo = 1
#PERFORMANS PARAMETRELERI
#parameter created by: SAP* 08.08.2001 10:30:18
abap/fieldexit = yes
#parameter created by: ALPER 13.10.2000 18:24:16
install/collate/active = 1
rdisp/max_wprun_time = 25000
MEMORY_NO_MORE_PAGING dump nedeniyle
#parameter created by: BASIS 27.12.2006 17:00:22
rdisp/PG_MAXFS = 262144
abap/heap_area_nondia = 2000000000
rdisp/PG_SHM = 16384
rdisp/ROLL_SHM = 32768
#'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
#Note 552209 - Maximum memory utilization for processes on NT/Win2000
#parameter created by: BASIS 30.10.2007 10:57:24
#abap/heap_area_nondia = 50000
#parameter created by: BASIS 30.10.2007 10:58:54
#rdisp/PG_SHM = 0
#parameter created by: BASIS 30.10.2007 10:58:27
#rdisp/ROLL_SHM = 625
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:49:57
dbs/mss/stats_on = 1
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:49:33
dbs/oledb/stats_on = 1
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:48:23
dbs/oledb/add_procs = 8
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:47:29
rsdb/esm/max_objects = 2000
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:47:03
rsdb/otr/buffersize_kb = 4096
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:46:21
rsdb/esm/buffersize_kb = 4096
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:18:14
ztta/parameter_area = 16000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:43
enque/table_size = 10000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:20
gw/max_sys = 2000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:01
gw/max_overflow_size = 25000000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:15:19
rdisp/max_comm_entries = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:14:48
rdisp/tm_max_no = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:14:20
gw/max_conn = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:13:42
rdisp/max_arq = 2000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:12:57
ztta/roll_area = 3500000
#parameter created by: BASIS 18.05.2005 09:20:25
#old_value: 90 changed: BASIS 18.05.2005 09:22:25
rdisp/max_hold_time = 300
#parameter created by: BASIS 20.08.2003 12:10:20
#old_value: 6144
#changed: BASIS 03.01.2008 19:42:10
rsdb/obj/buffersize = 20000
#parameter created by: BASIS 20.08.2003 12:09:48
#old_value: 6000
#changed: BASIS 03.01.2008 19:42:59
rsdb/obj/max_objects = 20000
note 103747
#parameter created by: BASIS 08.07.2003 20:42:11
#old_value: 250000
#changed: BASIS 30.10.2007 10:56:17
#abap/buffersize = 100000
#changed: BASIS 03.01.2008 19:40:36
#abap/buffersize = 300000
#by: BASIS 12.06.2008
abap/buffersize = 400000
note 103747
#parameter created by: BASIS 08.07.2003 20:41:32
#zcsa/presentation_buffer_area = 20000000
#64 bite gectikten sonra by: BASIS 10.06.2008
zcsa/presentation_buffer_area = 30000768
note 103747
#parameter created by: BASIS 08.07.2003 20:40:55
rsdb/ntab/ftabsize = 30000
note 103747
#parameter created by: BASIS 08.07.2003 20:40:12
rtbb/max_tables = 500
note 103747
#parameter created by: BASIS 08.07.2003 20:39:15
#old_value: 20000
#changed: BASIS 03.01.2008 19:41:29
#rtbb/buffer_length = 30000
#64 bite gectikten sonra by: BASIS 10.06.2008
rtbb/buffer_length = 50000
note 103747
#parameter created by: BASIS 08.07.2003 20:38:26
zcsa/db_max_buftab = 10000
note 103747
#parameter created by: BASIS 08.07.2003 20:37:37
#zcsa/table_buffer_area = 50000000
#64 bite gectikten sonra by: BASIS 10.06.2008
#zcsa/table_buffer_area = 89000000
by: BASIS 12.06.08
zcsa/table_buffer_area = 99000000
note 103747
#parameter created by: BASIS 08.07.2003 20:36:54
sap/bufdir_entries = 10000
note 103747
#parameter created by: BASIS 08.07.2003 20:36:12
rsdb/cua/buffersize = 8000
#note 103747
#parameter created by: BASIS 08.07.2003 20:34:46
#old_value: 5000 changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/sntabsize = 5500
#parameter created by: BASIS 08.07.2003 20:33:56
#note 103747
#old_value: 10607 changed: BASIS 08.07.2003 20:34:58
#old_value: 10000 changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/irbdsize = 11000
#note 103747
#parameter created by: BASIS 08.07.2003 20:32:18
rsdb/ntab/entrycount = 40000
#old_value: 2076 changed: BASIS 28.06.2005 19:36:21
#old_value: 5735 changed: BASIS 28.06.2005 19:40:01
PHYS_MEMSIZE = 4096
#64 bite gectikten sonra by: BASIS 10.06.2008
abap/heaplimit = 40894464
abap/heap_area_total = 2000683008
ztta/roll_extension = 2000683008
em/blocksize_KB = 4096
*** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/elem_per_queue = 2000
#auth/auth_number_in_userbuffer = 9000
#snc/enable = 0Hi Srikishan;
You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
Thanks for your help and interest
Best regards
Noyan -
Hi Experts,
I need small information.when messages are gone into queue state due to one message
When an EDI file came into wrong format and with that some messages are gone into queue state in MONI.
if i cancel the first message then remaining all the messages are processing successfully.
So from that cancel message i want sent the data manually as business needs that data.
Can all please tell me how to send the data manually with steps.
Thanks in Advance.
BhaskarHi,
I think you are talking about QoS "EOIO", in which all messages are porcessed in FIFO order and whenever the preceeding message get stuck due to error in the queue, then all the messages are stoped. And yes as soon as you will cancel the message which went into error all the remaining messages will automatically will be delivered.
In my opinion since QoS is EOIO then it will be not possible to sent the data mannually, you can do one thing, do not cancel the message. Try to correct the messge and then resend it.
Regards,
Sarvesh -
Error when updating the data from DSO to cube
Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
AnnieHi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha -
Error message "An error occurred sending the command to the application" When trying to open excel document from outlook 2007.
OS: Windows Server 2008 R2
If I save the document then it opens fine, messing with default file associations does not resolve this problem, I've googled for ir it and some suggest unticking compatibility mode or "run as admin" for excel application, neither is selected in my case.
Outlook is configured to run as remote application from remoteApp server, this error is only occurring for one user, for others excel documents open just fine.Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can Create a trusted location follow these steps
Click the Microsoft Office Button , and then click Excel Options.
Click Trust Center, click Trust Center Settings, and then click
Trusted Locations.
If you want to create a trusted location that is not local to your computer, select the Allow trusted locations on my network (not recommended) check
box.
Click Add new location.
IMPORTANT We recommended that you don't make your entire
Documents or My Documents folder a trusted location. Doing so creates a larger target for a hacker to potentially exploit and increases your security risk. Create a subfolder within Documents or My Documents, and make only that folder a trusted location.
In the Path box, type the name of the folder that you want to use as a trusted location, or click Browse to
locate the folder.
If you want to include subfolders as trusted locations, select the
Subfolders of this location are also trusted check box.
In the Description box, type what you want to describe the purpose of the trusted location.
Click OK.
More detailed information you can refer to this link:
http://office.microsoft.com/en-us/word-help/create-remove-or-change-a-trusted-location-for-your-files-HA010031999.aspx?CTT=1#BM12
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Now, I need to send something over network, yet those are not packed in TCP/IP or IPX packet, them are just some data a device can understand.
So the problem I met is seems I cann't send the data into NIC's buffer(I can do that in C, yet I want to use LabVIEW to do that)
And I don't want to do that by using a CIN, every time the program call or exit the CIN,there will be a delay, it's would bring me a bad impace to my application.
So is there anyone can help me with that? I really need some master can give me a comfirm!I'm not an expert on network communication, so maybe you can explain how data can travel on an IP based network without being wrapped in some packets from a protocol like TCP or UDP? Maybe it's possible for LabVIEW to do what you want, or maybe compiling your C code into a DLL (no need for a CIN) and calling that will be fast enough for what you want.
In any case, I think I can answer one question:
So, how long would we have to expect LV add/improve these functions? Could it be in next minor update?
Not likely, nor is it likely to be in any other version soon. LabVIEW is not built to handle this sort of thing any more than PHP or perl are and I don't think NI will change it to be able to do so. For that you have C, which you can call through a DLL. Some DLLs are supported on RT targets as well, but I'm not sure what the criteria are. They are probably listed somewhere on this site.
I assume that calling a DLL in an RT target will hurt your determinism, but communication code should not be time-critical code, unless your application is an application which requires high speed data transfers and synchronization between different nodes.
Try to take over the world! -
Error while uploading the data using FM"upload"
Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
VishnuYou have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY -
Error while loading the data from PSA to Data Target
Hi to all,
I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document posted
Info IDoc 2 : Application document posted
Info IDoc 1 : Application document posted
Info IDoc 4 : Application document posted
Info IDoc 3 : Application document posted
Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
Update PSA ( 2462 Records posted ) : No errors
Transfer Rules ( 2462 -> 2462 Records ) : No errors
Update rules ( 2462 -> 2462 Records ) : No errors
Update ( 0 new / 0 changed ) : Errors occurred
Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
SaranHi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM -
No data Exists error while retrieving the data from a table
Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding thisHi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake.... -
Error when loading the data from PSA to ODS......
Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil
Maybe you are looking for
-
I cannot edit/navigate the number on dialer
hi everyone, this is very annoying thing in the iphone. Even a simple basic mobile has this feature. Once you dial a number and if you want to edit it like you want to add the 0 or the country code at the beginning then apple won't allow user to do i
-
Generating Header and trailer sections in reports..
Hi all. I want to generate reports, that has both a header- and a trailer section page. Usually this was part of the template report, but in Designer 9, the generator first converts the template report (.rdf) to a template report (.tdf), and is then
-
Unresponsive when importing photos
Okay. So I have an SD card that has some movies and pictures on it (taken via my Canon). Whenever I try to import the items, iPhoto freezes up. It simply stays at the "preparing to import" screen and that's it. iPhoto does recognize the camera/card r
-
after update my iphone4 from ios5.0 to untethered ios5.0.1 i have the next problem, my home-screen wallpaper default folder become to black icons and if a set any it aply but in black, a lot of friends had the same issue without a fix. can someone te
-
Need help using JTextArea to read large file
Hi here is the deal. I've got a large file (about 12Mbytes) of raw data (all of the numbers are basically doubles or ints) which was formed with the ObjectOutputStream.writeInt/writeDouble (I say this to make clear the file has no ascii whatsoever).