RFC error when sending logon data

Hi;
We cannot configure the STMS of our development system. When we try to
configure it, system gives an error message: Errors during distribution
of tp configuration; TMS Alert Viewers tells us
RFC_COMMUNICATION_FAILURE: RFC communications error with
system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
data and READ_PROFILE_FAILED:File
erptest\sapmnt\trans\bin\TPPARAM
could not be opened for reading (No such file or directory).
Is there any advise for solution?
Best regards
Noyan
PS: Please find the profiles below:
START:
#.*       Start profile START_DVEBMGS00_erptest                                                                                *
#.*       Version                 = 000006                                                                                *
#.*       Generated by user = BASIS                                                                                *
#.*       Generated on = 30.12.2010 , 15:40:55                                                                                *
generated by R3SETUP
SAPSYSTEMNAME = FKT
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = erptest
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
start database
#_DB = strdbs.cmd
#Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
start message server
#_MS = msg_server.exe
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start IGS
Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
start application server
#_DW = disp+work.exe
#Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
  General parameters for starting the system
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPSYSTEM = 00
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPSYSTEMNAME = FKT
#parameter created                          by: BASIS        24.12.2007 23:53:27
#INSTANCE_NAME = DVEBMGS00
#parameter created                          by: BASIS        24.12.2007 23:53:27
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPGLOBALHOST = erptest
  Start database
#parameter created                          by: BASIS        24.12.2007 23:53:27
_DB = strdbs.cmd
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
  Start message server
#parameter created                          by: BASIS        24.12.2007 23:53:27
MS = msgserver.exe
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
  Start applications server
#parameter created                          by: BASIS        24.12.2007 23:53:27
_DW = disp+work.exe
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
DEFAULT:
SAPDBHOST = ERPTEST
dbms/type = mss
dbs/mss/server = ERPTEST
dbs/mss/dbname = FKT
dbs/mss/schema = fkt
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPFQDN = tr.delta.is
SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
SAPDBHOST = erptest
SAPTRANSHOST = erptest
DIR_TRANS =
$(SAPTRANSHOST)\sapmnt\trans
#DIR_TRANS = D:\usr\sap\trans
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
SAP Message Server for ABAP
rdisp/mshost = erptest
rdisp/sna_gateway = erptest
rdisp/sna_gw_service = sapgw00
rdisp/vbname = erptest_FKT_00
rdisp/enqname = erptest_FKT_00
rdisp/btcname = erptest_FKT_00
rdisp/msserv = sapmsFKT
rdisp/msserv_internal = 3900
rdisp/bufrefmode = sendoff,exeauto
login/system_client = 200
#GUVENLIK PARAMETRELERI
login/password_expiration_time = 90
login/min_password_lng = 6
#parameter created                          by: BASIS        25.03.2004 08:41:25
rdisp/gui_auto_logout = 10800
#parameter created                          by: BASIS        25.03.2004 08:37:47
#old_value: 3                                 changed: BASIS 25.03.2004 08:42:38
login/fails_to_user_lock = 6
#validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
#parameter created                          by: BASIS        16.06.2007 17:35:41
#old_value: 2
#changed:  BASIS         14.05.2008  15:24:55
auth/rfc_authority_check = 1
#otomatik unlocki iptal eder
#parameter created                          by: BASIS        10.11.2006 17:47:15
login/failed_user_auto_unlock = 0
#AUDIT PARAMETRELER?
#old_value:                                   changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_day = 1996800000
#old_value: 1000000000                        changed: BASIS 20.04.2005 17:17:01
#old_value: 0                                 changed: BASIS 20.04.2005 17:19:12
rsau/max_diskspace/local = 2048000000
#old_value: 2000000000                        changed: BASIS 28.03.2005 23:17:11
#old_value: 2                                 changed: BASIS 29.03.2005 12:09:14
#old_value: 0                                 changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_file = 665600000
rsau/enable = 1
rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
rsau/selection_slots = 12
#rec/client = ALL
DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
FN_AUDIT = ++++++++######..AUD
#DIL PARAMETRELERI
#Turkish codepage settings
abap/import_char_conversion = 0
install/codepage/db/non_transp = 1610
install/codepage/db/transp = 1610
zcsa/installed_languages = DET
#zcsa/system_language = E
zcsa/system_language = T
zcsa/second_language = E
install/codepage/appl_server = 1610
#OS dependent
abap/locale_ctype = Turkish_turkey.28599
#DIR_PUT = D:\usr\sap\FKQ\upg\abap
   *** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/msserv_internal = 3900
#system/type = ABAP
INSTANCE:
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
#rdisp/wp_no_dia = 10
#rdisp/wp_no_btc = 3
#rdisp/wp_no_enq = 1
#rdisp/wp_no_vb = 1
#rdisp/wp_no_vb2 = 1
#disp/wp_no_spo = 1
rdisp/wp_no_dia = 12
rdisp/wp_no_vb = 3
rdisp/wp_no_vb2 = 0
rdisp/wp_no_enq = 1
rdisp/wp_no_btc = 3
rdisp/wp_no_spo = 1
#PERFORMANS PARAMETRELERI
#parameter created                          by: SAP*         08.08.2001 10:30:18
abap/fieldexit = yes
#parameter created                          by: ALPER        13.10.2000 18:24:16
install/collate/active = 1
rdisp/max_wprun_time = 25000
MEMORY_NO_MORE_PAGING dump nedeniyle
#parameter created                          by: BASIS        27.12.2006 17:00:22
rdisp/PG_MAXFS = 262144
abap/heap_area_nondia = 2000000000
rdisp/PG_SHM = 16384
rdisp/ROLL_SHM = 32768
#'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
#Note 552209 - Maximum memory utilization for processes on NT/Win2000
#parameter created                          by: BASIS        30.10.2007 10:57:24
#abap/heap_area_nondia = 50000
#parameter created                          by: BASIS        30.10.2007 10:58:54
#rdisp/PG_SHM = 0
#parameter created                          by: BASIS        30.10.2007 10:58:27
#rdisp/ROLL_SHM = 625
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:49:57
dbs/mss/stats_on = 1
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:49:33
dbs/oledb/stats_on = 1
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:48:23
dbs/oledb/add_procs = 8
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:47:29
rsdb/esm/max_objects = 2000
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:47:03
rsdb/otr/buffersize_kb = 4096
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:46:21
rsdb/esm/buffersize_kb = 4096
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:18:14
ztta/parameter_area = 16000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:43
enque/table_size = 10000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:20
gw/max_sys = 2000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:01
gw/max_overflow_size = 25000000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:15:19
rdisp/max_comm_entries = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:14:48
rdisp/tm_max_no = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:14:20
gw/max_conn = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:13:42
rdisp/max_arq = 2000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:12:57
ztta/roll_area = 3500000
#parameter created                          by: BASIS        18.05.2005 09:20:25
#old_value: 90                                changed: BASIS 18.05.2005 09:22:25
rdisp/max_hold_time = 300
#parameter created                          by: BASIS        20.08.2003 12:10:20
#old_value: 6144
#changed:  BASIS         03.01.2008  19:42:10
rsdb/obj/buffersize = 20000
#parameter created                          by: BASIS        20.08.2003 12:09:48
#old_value: 6000
#changed:  BASIS         03.01.2008  19:42:59
rsdb/obj/max_objects = 20000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:42:11
#old_value: 250000
#changed:  BASIS         30.10.2007  10:56:17
#abap/buffersize = 100000
#changed:  BASIS         03.01.2008  19:40:36
#abap/buffersize = 300000
#by: BASIS 12.06.2008
abap/buffersize = 400000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:41:32
#zcsa/presentation_buffer_area = 20000000
#64 bite gectikten sonra   by: BASIS 10.06.2008
zcsa/presentation_buffer_area = 30000768
note 103747
#parameter created                          by: BASIS        08.07.2003 20:40:55
rsdb/ntab/ftabsize = 30000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:40:12
rtbb/max_tables = 500
note 103747
#parameter created                          by: BASIS        08.07.2003 20:39:15
#old_value: 20000
#changed:  BASIS         03.01.2008  19:41:29
#rtbb/buffer_length = 30000
#64 bite gectikten sonra  by: BASIS 10.06.2008
rtbb/buffer_length = 50000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:38:26
zcsa/db_max_buftab = 10000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:37:37
#zcsa/table_buffer_area = 50000000
#64 bite gectikten sonra   by: BASIS 10.06.2008
#zcsa/table_buffer_area = 89000000
by: BASIS 12.06.08
zcsa/table_buffer_area = 99000000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:36:54
sap/bufdir_entries = 10000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:36:12
rsdb/cua/buffersize = 8000
#note 103747
#parameter created                          by: BASIS        08.07.2003 20:34:46
#old_value: 5000                              changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/sntabsize = 5500
#parameter created                          by: BASIS        08.07.2003 20:33:56
#note 103747
#old_value: 10607                             changed: BASIS 08.07.2003 20:34:58
#old_value: 10000                             changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/irbdsize = 11000
#note 103747
#parameter created                          by: BASIS        08.07.2003 20:32:18
rsdb/ntab/entrycount = 40000
#old_value: 2076                              changed: BASIS 28.06.2005 19:36:21
#old_value: 5735                              changed: BASIS 28.06.2005 19:40:01
PHYS_MEMSIZE = 4096
#64 bite gectikten sonra   by: BASIS  10.06.2008
abap/heaplimit = 40894464
abap/heap_area_total = 2000683008
ztta/roll_extension = 2000683008
em/blocksize_KB = 4096
   *** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/elem_per_queue = 2000
#auth/auth_number_in_userbuffer = 9000
#snc/enable = 0

Hi Srikishan;
You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
Thanks for your help and interest
Best regards
Noyan

Similar Messages

  • Error when sending data request

    Hi All,
       i have scheduled info package for different type data sources in bi 7.0, for this i am getting the data from  ecc 6.0 . all of this schedule's showing  the status "error when sending data request" with the following details.
    status
    diagnosis
    the request idoc could not be sent to the source system using rfc
    system response
    there is an idoc in the warehouse outbox that did not arrive in the ale inbox of the source system
      in step by step analysis it is showing
       rfc to source system successful showing with ash status
       data selection successfully stated  and finished ? show with red status
    in that details tab
    request : showing with green status
    everything ok
    extraction :showing with red status
    missing messages
    transfer(idocs and trfc) : missing messeges
    processing(data packet) : no data
        it is showing technical status with red as processing overdue
                           processing step call to source system
       so it is showing error with 0 from 0 records.
    please any body could help me for solving this error.
    regards,
    naveen.

    Hi
    Seems you have connectivity issues between the Source system and Bi system.
    You need to check whether you have data on R/3 side via RSA3 with Full / Delta Update Modes with Target System as your BI system.
    RSA13--Source System -- Right click Connection parameters/check/Restore/Activate again Say Replicate All Data Sources (If Possible , provided if you have time because it consumes lot of time )
    You need to check the tRFC Queue SM58/59 for any Stucks and WE19/20 for IDocs.
    Much of BASIS Issue .
    Hope it helps and clear

  • IDoc_02_Error passing data to port-Communication error when  sending with HTTP

    Hello All,
    We are receiving the error "02_Error passing data to port-Communication error when  sending with HTTP", when sending the idoc to PI from ECC system.
    Observation:
    1. Some idocs are failing and immediately after sometime the same type of  idocs with different idoc numbers are getting successful.
    Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
    2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
    please help me in resolving the issue.
    Regards,
    Ch. Venkat.

    status 02 is     Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
    Thanx and Regards
    Arpan Maheshwari

  • Error when sending message: 500 Internal Server Error

    Hi
    IE is not accepting any messages,
    when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
    following things what i have noticed.
    1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the  IE admin) URL is  "http://<host>:8000/sap/xi/engine?type=entry"
    2. SICF all the XI serivess are up and running, i am able to test these service.
    3. The http port is active ( SMICM )
    Pls note the error is  500 Internal Server Error  
    regards
    Nisar

    I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
    This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
    1 Check Table Space is enough. ---i had installed server recently & very few interface running.
    2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
    3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
    Try restart the java stack(XI Server) and follwing services.
    com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
    com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
    basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
    regards
    Nisar

  • Error when sending message: 500 Timeout

    while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
    can any1 throw some light on this.

    Hi venu,
    you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
    there are two ways you can change it:
    1. check out note: 824554
    TCODE - rz10
    icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
    (for 800 seconds)
    8010 is my HTTP port so you have to change it:)
    2. SXMB_ADM -> configure integration server -> change specific identifiers
    runtime parameter:
    Parameter HTTP_TIMEOUT
    Meaning
    Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
    Personally I only changed the one from the instance profile but the second one should work too
    My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
    If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
    Let me know what u have done , if it works
    Thanks,
    srini

  • RWB:Error when sending message: 404 Not Found

    Dear all,
    "i am getting error:      Error when sending message: 404 Not Found"
    while testing from rwb > Component Monitoring   > Non-Central Adapter Engines >  Adapter Engine AIPID > test message >
    with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
    sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
    and my id comm channel > target host > bid.xxx.com with service no
    (adapter type: xi
    adapter engine: Integration server
    address type: url address
    target host: bid
    service no: 8000
    path: /sap/xi/engine?type=entry
    i am working in nw2004s system)
    while testing cache connectivity test from rwb > Component Monitoring 
    i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
    green: Integration Repository
    green: Integration Directory
    green: Integration Server - JAVA
    red:Adapter Engine af.axd.aipid
    yello:Integration Server - ABAP
    Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
    [Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
    [Data Evaluation]: GlobalError
    though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
    what should i do?
    best regards,
    dushyant.
    refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
    and
    SXI_CACHE
    @8O@ Error during last attempt to refresh cache
    LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
    Smq2 = 0
    Sm58 = 0

    Hi,
    If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
    http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
    For your error, refer to the following threads:
    Unable to find an associated SLD element
    Unable to refresh cache contents in XI.
    Unable to find an associated SLD element
    Cheers
    Manish

  • Error when sending message: Method not implemented

    Hi, All:
    We have newly setup system and when we test sending test message from RWB, (RWB-Component Monitoring-Integration Engine-Test Tab), we got following error:
    "Error when sending message: Method not implemented", I know this is related to post configuration issue, I just know someone has come cross the situation and how it was resolved.
    Thanks
    Liang

    HI Liang
    Yes it looks like post installation problem. I have not come across this but i think you should check with the RFC created for IE while installation. To connect IE & AE and even the exchange profile if something is missing
    Thanks
    Gaurav

  • Error when updating the data from DSO to cube

    Hi,
    I am getting the error when uploading the data from the ods to cube.
    The following is the error message.
    Unable to determine period for date 20090101, fiscal year variant Z2: Error #
    How can i solve this issue.
    Regards
    Annie

    Hi ,
    fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
    check this link ..
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
    Regards,
    shikha

  • Error when sending message: 404 not found

    Hi,
    New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
    In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
    "Error when sending message : 404 not found"
    Also tried in Adapter Engine and the result same.
    Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
    Any idea's?? what might be the issue????
    Thanks,
    Venu.

    Hi Venu,
    "404 is a not found error", plz make a check of  your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
    Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
    If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
    http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
    For your error, refer to the following threads:
    Unable to find an associated SLD element
    Unable to refresh cache contents in XI.
    Unable to find an associated SLD element
    Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
    http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
    Select XI Adapter Framework.
    Thirteen associations have to be registered.
    (Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
    If you can't find all the associations, then you will have to create the associations manually.
    This is a very good blog which answers ur question:
    check this weblog
    https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
    Regards,
    Vinod.

  • Test message from RWB: Error when sending message: 401 Unauthorized

    Hi Experts,
    While I am sending test message from RWB, I am getting following error:
    Error when sending message: 401 Unauthorized
    I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
    I am having SAP_ALL authorizations and few days back everything was fine.
    I think something wrong with configuration in XI but I am unable to pin point.
    Please help.
    Regards,
    Gourav

    Yes,
    but
    Role of Business System : Integration system
    Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
    How can I change it to Application system
    and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
    Regards,
    Gourav

  • KP06 Cost Center Budget Planning System error when locking the data records

    Hi,
    While updating Cost Center Planning system(KP06) its giving the below error:
    System error when locking the data records.
    Message no. KI502
    Diagnosis
    The lock to protect the data records being processed could not be set. The
    probable reason for this is that the SAP locking table is full and no more
    entries can be added.
    Procedure
    Inform your system administrator immediately
    No planning data has been changed
    Message no. K8038
    Diagnosis
    You used Post. While preparing the data for posting, the SAP System
    determined that no changes were made in the available databank values.
    System Response
    A posting activity price is not necessary
    Please help me how can we rectify the above error..
    Thanks
    VS Rao

    Hi,
    check the locking entries (t-code SM12).
    http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
    Best regards, Christian

  • Error when generating master data routines

    Hello all,
    I´m trying to activate 0BPARTNER but an error appears: Error when generating master data routines, and no more information is provided.
    I´m working with BW 7.0.
    Has anybody had this problem?
    How could I solve it?
    Thanks in advance.
    Carmen

    Hi Carmen,
    I'm working with SAP BW 700 and I had also this error during a characteristic activation in my QA system. This happened when I tried to transport the activated characteristic from my DEV system.
    I found  also message TK425 when I was trying activation through RSDG_IOBJ_ACTIVATE program.
    I solved this error message with OSS note 01458319 700SP24: "Transport fails during the impact analysis of DTP".-
    I hope this helps.
    Best Regards.
    AW

  • Error when generating master data routines when activating infoobject

    Hello Gurus,
    I had an issue with one of my info object.
    I Created the one Custom InfoObject  with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject  went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject  again the test system it gives me an error
    Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
    Can you please suggest me what are the options.
    i cannot delete the object as it is used in many cubes which is having data.
    Appreciate your quick response.
    Thanks,
    Bhaskara Rao.

    If your Prod is working fine, it should work in test too.
    Did it ever worked in test after transport?
    Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
    You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
    Edited by: ashok saha on Mar 6, 2008 8:05 PM

  • ERROR WHEN GENERATING EXPORT DATA SOURCE

    Dear Members,
    I am getting an error when generating export data source for Info Cube.  I'm creating an Info Cube based on already existed info cube.  Literally I am copying all the settings of an info cube to new Info Cube.  The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful.  But the problem is when I am generating export data source the following error is occurred.
    Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
    what could be the reason for the error?
    Please let me know.
    Thanks in advance.

    Dear Venkat,
    The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
    Thanks,
    Krish

  • Error when transforming object data HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Hi
    I am running on NW04s. Working on WD for ABAP Interactive forms. whenever I open the Adobe editor thru SFP or Se80,  the editor opens up and I am able to do my operations. The moement I hit back button/Save or any other action which involves coming out of the adobe editor, it throws me an Fatal error - <b>Error when transforming object data</b>. I find that in most of the threads there are similar issues which are still open. Any Help would be appreciated.
    I have installed ADLC 7.1, xACF04s.
    Murali.

    I did the same installation on another PC, and to my suprise it works fine. Looks very strange

Maybe you are looking for

  • Ajax4jsf filter is not getting stated...

    Hi, I am using jboss-portal-4.0.2 and JSF myfaces implementation. In one of my pages, I want to use ajax functionality for dropdown boxes. For that i m usinf ajax4jsf.jar. And i am trying to configure the Filter which is there in this jar. But i am u

  • No luck trying to capture vinyl albums

    I'm trying to figure out what I'm doing wrong when using Soundbooth to capture audio from vinyl albums. I'm using a turntable that's connected to a receiver. I've got RCA jacks connected to the receiver's tape playback plugs with the other end connec

  • System monitoring configuration in solution manager EHP1

    Hi all I am in a bit of fix We have upgraded our solution manager devlopment to EHP1 Now I have added one system through SMSY in solution manager to configure system monitoring I have generated all the RFC's,I have created the logical component and s

  • X-fi extrememusic keeps resetting to 2/2.1 speakers on a restart after vista upgr

    I checked the knowledgebase and it said to make sure x-fi is default device and disable other devices, which I have done, but everytime I reboot the settings in audio console keep resetting to 2/2. speaker configuration when I used 5.. If I manually

  • About Insert Error

    insert into t1 values(a,b,c,d) as select e,f,g,h from scott.t2; ORA-01401: inserted value too large for column why?If t1's column larger than t2's column?