Error in shopping cart creation

Hello,
We are creating a shopping cart and following error message has been displayed on the portal.
The url was not called due to an error.
Following notes were describing the error:
Inetrnal error cannot sync.
The error was occured on application server eccps_srq_50 and work process 4
termination type TH_RES_FREE.
ABAP Call stack was
system-exit of program SAPLBBP_SC_UI_ITS
Regards,
Ashish

Hi
On what event, this short dump is happening. Please elaboarte.
Can you please paste the details dump here. ?
Hope this will help.
Regards
- Atul

Similar Messages

Object: Error on Shopping Cart creation (BBPSC02)

Hi all,
While adding an item to a Shopping Cart, the following error is occurring:
Error when processing your request
What has happened?
The URL https://srm.test.corp:8005/sap/bc/gui/sap/its/bbpsc02/~flNUQVRFPTIwMzA1LjAwNC4wMy4wMQ== was not called due to an error.
Note
The following error text was processed in the system EST : Template interpretation failed. Template does not exist.
The error occurred on the application server sapsrmt_EST_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: B40B_ACCSERV_CHECKACCASSIGNMT of program SAPLBBP_BD_DRIVER_40B
Function: META_ACCSERV_CHECKACCASSIG_BUF of program SAPLBBP_BD_META_BAPIS
Function: META_ACCSERV_CHECKACCASSIGNMT of program SAPLBBP_BD_META_BAPIS
Form: COBL_CHECK of program SAPLBBP_PDACC
Form: ACCOUNT_CHECK_SINGLE of program SAPLBBP_PDACC
Form: ACCOUNT_MAINTAIN_SINGLE of program SAPLBBP_PDACC
Form: ACCOUNT_F_CREATE of program SAPLBBP_PDACC
Function: BBP_ACCOUNT_CREATE of program SAPLBBP_PDACC
Form: ITEM_F_CREATE_FROM_WTAB of program SAPLBBP_PDIAD
Form: ITEMLIST_F_UPDATE of program SAPLBBP_PDIAD
Going into the ST22, as Error Analysis it is suggested:
As a test, you can set the service parameter ~generateDynpro = 1. The system then generates the HTML page for this service without a template. You can then at least see which screen was sent by the WebAs. Make sure to reset the parameter to its original value.
Adding this parameter, the transaction is working properly, but is asking User ID and password to connect to the back-end (that seems strange to me!).
A similar error (with different functions involved) is occurring while clicking on Settings: user settings are not visualized, but also changing the service parameter ~generateDynpro = 1, the transaction is working.
Any idea on where is the problem?
Thanks in Advance,
#Bill J.

Hi Luciano,
these are the information coming from ST22 about the dump:
Information on where terminated
Termination occurred in the ABAP program "SAPLBBP_BD_DRIVER_40B" - in "B40B_ACCSERV_CHECKACCASSIGNMT".
The main program was "SAPLBBP_SC_UI_ITS ".
In the source code you have the termination point in line 181 of the (Include) program "LBBP_BD_DRIVER_40BU34".
Source code extract
164 IMPORTING
165 expcobl = e_backend_cobl[]
166 messages = return40b[].
167 IF e_backend_cobl[] IS NOT INITIAL.
168 REFRESH lt_backend_cobl.
169 lt_backend_cobl[] = e_backend_cobl[].
170 lv_change_in_badi = gc_yes.
171 ELSE.
172 IF lv_change_in_badi = gc_yes.
173 e_backend_cobl[] = lt_backend_cobl[].
174 ENDIF.
175 ENDIF.
176 ENDIF.
177 ENDDO.
178 ENDIF.
179 IF lv_change_in_badi = gc_no.
180
>>>> CALL FUNCTION 'BBP4X_CODINGBLOCK_CHECK'
182 DESTINATION destination
183 TABLES
184 bbpcobl = i_backend_cobl
185 expcobl = e_backend_cobl "note 202684
186 return = return40b
187 EXCEPTIONS
188 communication_failure = 1 MESSAGE msg_text
189 system_failure = 2 MESSAGE msg_text
190 OTHERS = 3.
191
192 IF NOT sy-subrc IS INITIAL.
193 CALL FUNCTION 'CONTROL_RECORD_ADD_VALUE'
Any suggestion on how to debug are welcome.
Thanks
#Bill J.

Error while shopping cart creation

Hi All,
We are on SRM 7.0 and ECC 6.0.
We have just recently set up our SRM 7.0 system along with the portal. SSO, UWL etc have been configured in the Portal.
Now when the user logs in to create a shopping cart and clicks on the
1. Employee Self Service link, he gets the following error :
The URL http://sapsrmdev:8003/sap/bc/webdynpro/sap/powl/ was not called due to an error.
Note
The following error text was processed in the system ASR : Die URL enthält keine vollständige Domainangabe (sapsrmdev statt sapsrmdev.<domain>.<ext>).
The error occurred on the application server SAPSRMDEV_ASR_03 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
PS : The user has the standard employee self service role in the portal and employee role in the backend.
Also the service sap/bc/webdynpro/sap/powl/ is active.
Please provide inputs.
Regards
Edited by: sivakumar lakshminarayanan on May 12, 2011 11:56 AM

Hi Jay,
I maintained the FQDN as you mentioned.
Now I am getting a different error when I click on Employee Self Service link.
The URL http://sapsrmdev.patni.com:8003/sap/bc/webdynpro/sap/powl/ was not called due to an error.
Note
The following error text was processed in the system ASR : An exception occurred that was not caught.
The error occurred on the application server SAPSRMDEV_ASR_03 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_LAYOUT of program CL_POWL_PERS_ACCESSOR=========CP
Method: INITIALIZE of program CL_POWL_MODEL=================CP
Method: HANDLEDEFAULT of program /1BCWDY/AFSW3OIPJU90DEGN2AMU==CP
Method: HANDLEDEFAULT of program /1BCWDY/AFSW3OIPJU90DEGN2AMU==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/AFSW3OIPJU90DEGN2AMU==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Regards

Accoung Assignment tab is disable during shopping cart creation

Hi Gurus,
Ned your expert advice on this issue.
We are using SRM7.0 classic scenario. During configuration, under SPRO>Supplier Relationship Management>SRM Server>Cross Application Basic Settings>Account Asisgnment, we define Account assignment categories, define G/L account for Product Category and Account assignment Category and no entry under Maintain Local Accounting Data.
However during shopping cart creation, Account Assignment tab is disable. We cannot even add line item and throwing an error. We assigned therequired entries under PPOSA_BBP but still unable to complete the shopping cart.
Please advice how to resolve the issue.
Thanks.

Hi,
Have you enabled the 'default' checkbox?
Regards,
Nikhil

Shopping cart Creation Time is different from system time

Hi ,
Shopping Cart Creation Time is Different from System time.
Could you tell me,        to which time it is refering to.
How to change it.
Create By is      webseruser
Where can I find the required settings for the same
Thanks In advance

Hello,
Are you checking this in BBP_PD?
If you go to SU01 and check parameter "Personal Time Zone" -> "of the user", this time will appear to end user when creating document (document header in web).
                                                                                If you do not have informed any value, it will be populated the pattern system timezone, defined in SU01 as well.
                                                                                - I created a RFX in my test system with a user who's timezone (in tx SU01) is set as:
Sys. Time Zone     CET
of the User        INDIA
- CET time was 20:01:55
- GMT time was 18:01:55
- India time was 23:31:55
Looking at this RFX in BBP_PD I see the following:
Same user (India timezone and CET as "Sys. Time Zone"):
Created_At: 20:01:55
Changed_at: 20:01:55
DETAILS (header):
Created at: 18:01:55
Changed at: 18:01:55
RFX header (description): 23:31:55
So, for end users, you should populate field "of the user" in SU01.
In BBP_PD header details, you will have the GMT time (which is stored in internal tables).
In BBP_PD created_at and changed_at you will have the system time zone, as defined in SU01.
Regards,
Ricardo

Using Wforms (Adobe interactive forms) in lieu of shopping cart creation

Our users complain of too much data entry during shopping cart creation and less frequent users complain about forgetting GL a/c and product ID. In talking to SAP their suggestion is to implement Wforms to avoid end users logging into SRM and rather enter relevant details on wform and then convert it to Shopping cart.
Has anyone implemented and can share how the experience has been,how difficult it to to implement wforms and support thereafter.I undertsand that wforms had issues in the past but SAP now claims to have overcome all those limitations.Please share your experience.

Hi Ruchi,
Did you say SAP proposed that you use WFORMS in place of SRM Shopping Cart?? I am not entirely sure we are quite there yet! There is lots of details available [here |http://www.sdn.sap.com/irj/sdn/adobe]which describe SAP interactive forms. Maybe this will help you. But I am surprised your users find the SC creation difficult, especially the 4 step wizard, can you not assign default values to many of these areas where they are having trouble? (GL accounts etc)
Regards,
Jason

Shopping Cart Creation - SAPLBBP_PD program error

Hi Folks,
I have one query. Need your help on this.
We are using Product category. In extended attributes, for company code i deactivated the product category. Now, how is the possibility that i can use these product categories again back in my SRM system.
I'm also observing the error in SRM shopping cart processing as below:
Error application is coming up.
20110315
168996
085921
ISVSAPSRMDEV
http://isvsapsrmdev.ad.infosys.com:8001/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
SYNTAX_ERROR
Syntax error in program SAPLBBP_PD .
Method: CREATE_SC_INT of program /SAPSRM/CL_PDO_FACTORY_SC_ADV=CP
Method: CREATE_SC_INT of program /SAPSRM/CL_PDO_FACTORY_SC_ADV=CP
Method: CREATE_NEW_INSTANCE of program /SAPSRM/CL_PDO_FACTORY_SC_ADV=CP
Method: CONSTRUCTOR of program /SAPSRM/CL_CH_WD_BOM_SC=======CP
Method: /SAPSRM/IF_CH_WD_MAP_FACTORY~CREATE_SC_MAPPER of program /SAPSRM/CL_CH_WD_MAP_FACTORY==CP
And short dump while processing BBP_PD
Kindly guide.
thanking you all.
Sangmesh Hiremath

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Shopping Cart creation error

I am using SRM 4.0 and ECC 5.0 with Ex Classic scenario.
While I am trying to create Shopping cart following error is coming :-
"No organizational data exists on item level"
I have checked up all Org. plan data i.e. users are consistent all attribute in org nodes in function tab like company code Pur Org or Pur Grp maintained.
Secondly I have checked in R/3 that Material is also having Organization data like is extended to a Plant and Storage and Pur and Storage views are maintained. Still problem not resolved.
I am not able to understand this error message.
Could somebody help me ?
Thanks
Sanjay

Hi Vadim,
I found out the reason of problem. When we deflag check box for activate Extended Classic. This problem goes away.
Further as suggested by you we have analyzed Xn BBPSC01 in SAP gui and found in Extended details every data is populated like Prod Cat.,Company,Plant and S Loc etc. except Pur Org and Pur Grp. When we deflag Extended classic check box than Pur Org and Pur Grp are also populated.
What could be done as I have to use Extended classic scenerio.
Problem of in ITS service page of basic data not being displayed remains.
Thanks
Sanjay

Error in shopping cart

Hi all,
While creating the shopping cart i'm getting this problem
"select storage location that is assigned to the plnat"
for some othey product category ( extended )
"Plant for follow-on document missing"
Any suggestion from your side ,please
Thanks
Hareesha

Hi
Which SRM version are you using ?
Please go through this ->
For the Error - "select storage location that is assigned to the plant"
Re: Error: Select a location to which a plant is assigned
PO error !!
Plant and Location in SRM
Re: Plant (location) and purchasing group matchcode empty in the SC
Re: Plant disappears in extended attributes
"Error- Plant for follow-on document missing"
SAP OSS note 913831
Plant missing for follow-on documents
New Plant creation
Plant disappears from PPOMA?
Please revert in the event of any query.
Regards
- Atul

Shopping Cart creation with reference to Backend Contract

Dear Experts,
We are working in SRM 7.0 Classic Scenario.
We have Backend Contract with document type PCTR which is available as Source of Suppliy when creating Shopping cart.
I can use this contracts as source of supply but the issue is when the Shopping cart total quantity crosses the target value of the Contract quantity there was no error message as the quantity has exceeded the target quantity.
The system is allowing me to create the Shopping cart but after approval the Shopping cart is showing the status as Approved and not creating PO or PR.
Is there any configuration available to get the update if the quantity in SC crosses the Target quantity of the backend contract.
It is also OK if the SC goes to Purchasers work list if the target quantity is crossed.
Kindly reply to this thread immedeately.
Regards,
B.N.Karthikeyan.

Hi
target quantity or Target value ?
what about your Contract value contract - target value or target quantity
i aware value contract is throwing message if the sc exceeds the contract value.
share your contract details.
is it created in ECC or CCTR or GCTR . target quantity for materials or taget value for that material
br
Muthu

Is there anyone who can help me out in shopping cart creation by FM?????

Hi Guys,
I am trying to create a Shopping cart in SRM system executing the RFC from External system.I am trying hard to solve this issue since last 1 months and still i am not able to do that.plz help me out its very urgent now.
I am trying to use BBP_PD_SC_CREATE in combination with BBP_PD_SC_SAVE and Commit.
Here Below i am mentioning what all fields i using to pass the data, and what all errors i am getting after executing the function Module.
Please check it and tell me where exactly i am doing mistake.
FM ---> BBP_PD_SC_CREATE
I_REF_GUID 00000000000000000000000000000000
I_PARK X
I_SAVE X
I_HEADER
GUID 00000000000000
DESCRIPTION TEST
CURRENCY USD
PROCESS_TYPE SHC
I_ITEM
GUID 00000000000000000000000000000000
PARENT 00000000000000000000000000000000
NUMBER_INT 0000000001
NUMBER_EXT 0000000000
PRODUCT 00000000000000000000000000000000
DESCRIPTION MONITOR
CATEGORY 00000000000000000000000000000000
CATEGORY_ID 65.10
QUANTITY 1.000
UNIT EA
PRICE 1.00
PRICE_UNIT 1
GROSS_PRICE 1.00
CATALOG_PRICE 0.00
CURRENCY USD
PRODUCT_TYPE 01
LOGSYS_FI CFG300
BE_LOG_SYSTEM CFG300
BE_PLANT BUS1
BE_MOVE_REAS 0000
BE_PUR_GROUP W01
BE_PUR_ORG IBRD
BE_CO_CODE IBRD
BE_DOC_TYPE ECPO
BE_PACKNO 00000000
BE_INTROW 00000000
BE_PO_PRICE 1
I_ACCOUNT
GUID 00000000000000000000000000000000
P_GUID 00000000000000000000000000000000
DISTR_PERC 100.00
ACC_NO 0001
ACC_CAT CC
SRC_GUID 00000000000000000000000000000000
G_L_ACCT 500411060
BUS_AREA VTRS
COST_CTR 6589
SDOC_ITEM 000000
SCHED_LINE 0000
CO_AREA WBG1
PROF_SEGM 0000000000
CMMT_ITEM 500411060
FUNDS_CTR 6589
FUND BB
I_PARTNER
PARTNER_GUID 000000000000000000000000
P_GUID 000000000000000000000000
PARTNER_FCT 00000039
PARTNER_NO
ADDR_TYPE 1
ADDR_ORIGIN A
ADDR_NO 10735
PARTNER_ID 1058
same like i have passed 3 more partner details.
I_ORGDATA
GUID 0000000000000000000000000
P_GUID 0000000000000000000000000
PROC_ORG_RESP_ID 50000641
PROC_ORG_ID 50000640
PROC_GROUP_ID 50000641
When i execute it, i am getting error like
"Interface Data Contains error"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDDYN"
"Incorrect Interface Data for set PDFRT"
"Incorrect Interface Data for set PDHCF"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDORG"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDTAX"
"Incorrect Interface Data for set PDDEP"
"Incorrect Interface Data for set PDTOL"
"Incorrect Interface Data for set PDWGT"
"Enter Atleast one item for one limit"
Thanks alot.
GRTZ.
Regards,
Manoj Tiwari

Hi,
before I would try to save a SC to the database, I would check how I have to fill the interface. Therefore I would suggest to read at first a SC from the database with FM BBP_PD_SC_getdetail. With this example of an existing SC you should be able to will the interface correctly.
E.g. when you check an existing SC with FM BBP_PD_SC_getdetail you see that some parameters are missing in your I_ORGDATA part. The I_ORGDATA part of my SC example looks like the following:
PROC_ORG_RESP_OT               O
PROC_ORG_RESP_ID               92001699
PROC_ORG_OT                    O
PROC_ORG_ID                    92000053
PROC_GROUP_OT                  O
PROC_GROUP_ID                  92001699
Here you can see that you forgot the whole *OT parts! In your case the system doesn't know that you mean an orgunit.
As I mentioned above, when you know how a SC looks like on the database, it should be easy to fill the FM interface.
Best regards
Dennis

Receiving Error in Shopping Cart : Order Does not exist

Hi
While creating Shopping Cart and click Insert From Clipboard button, I am receiving " Order xxxx does not exist (Item yyy ).
Please tell me why I receive this error and what causes and possible fixes to this?
Details:
The scenario I am doing is I have a webdynpro ABAP application which copies Value, Cost Center, OR Cost objects in to Clipboard.
now when I go to Shopping card - > descrive requirment -> Cost assignment section-click Insert From ClipBoard - throws below error: "Order xxxxxx does not exist (Item yyyy)"
Indeed OR cost objects which are valid in the SRM system and every OR line is seen as invalid by SAP with above error message. Please explain
Thanks
Praveen
Edited by: Praveen kumar Kadi on Jun 21, 2011 9:16 AM

Hi,
Thnaks for your reply.
Actually manual copy To clipboard works fine from Shopping Cart. when we use webdynpro application to copt to Cliboard with same data it doesn't work. So I believe the key to debug SRM Shopping Cart-> CopyToClipBoard functionality like how the values have been copied to from shopping cart. So that we can compare Shopping Cart->CopyToClipboard value with Webdynpro CopyToClipBoard values.
How to find what and which values and in which format copied from shopping Cart-CopyToCliboard.? Anyway to see this in debug.
Please help with some screenshots/debug screens.
thanks
Praveen

Cost Center Error in Shopping cart Multi Line items

Hi,
We are working on SRM 4.0. when the user is trying to create a shopping cart from catalog he gets the error message as
"you don't have the acces to the cost object xyz12.please return to the cost assignment section and correct".
We have given the access to that cost center in SRM even also he is getting the same error.
He does not have any problem with single line item against the same cost center. problem gets only when he is going to create with multiple line items in shopping cart against the same cost center.
Request all please advise me where i need to check to overcome the issue.
Regards,
Sri

Hi,
Thanks for your kind response. can you please elaborate bit more step by step.
Awaiting for your feedback.
Regards,
sri

Error on shopping cart : "No purchasing group exists"

Hi,
While the user tries to add items to shopping cart through portal, he is getting error "No purchasing group exists" which stops the user from saving the shopping cart.
We have checked org structure where all the necessary configuration is existing. Please suggest what could be the reason for the error.
Thanks in advance.
Tejas Jani

Hello Tejas,
System is not able to determine the PGrp. 3 things are important for determining PGrp
a. Organization Unit
b. Product category
c. Logical System
To check whether its a data issue or system issue. Best way is to update one of the PGrp
1. Ensure in function tab PGrp is flagged & assigned to backend PGrp
2. Maintain Responsibility tab Product responsibility as * & Organization responsibility as highest node in Org structure.
Now, create a new shopping cart. It should pick this PGrp. If not, check if you have implemented BBP_PGRP_FIND BADI in system.
Hope this helps.
Ashutosh

Error creating shopping cart

Hi
While creating Shopping Cart. In Account Assignment view, Assign
type select ->WBS Element than give WBS Element Assign No and Check.
Describe the problem
While check the following error noticed "The Account Assignment objects
are defined for diff. business area".
what is the problem??
Thanks
Hareesha

Hi
Seems like you are using Wrong WBS Element combination with the Account asignment in this case.
Please cosult with Functional persons here to get the correct test data for creating a new Sales order... Alternatively, try the same combination in R/3 system in transaction - ME21N (Create PO), and see what error messages comes up there ..
Hope this will help.
Regards
- Atul

Error in shopping cart creation

Similar Messages

Maybe you are looking for