Error in splitting records from an internal table

Hi all,
After uploading the data from flat file into an internal table the data consists of # between each field and while I try to split each field and assign to a different table the data is not getting split properly ,
i.e. split function splits the fields after 3 '#' and storing it in the table field.
Thanks & Regards
Jerry

Hi Jerry,
What Uwe said is correct. We too faced that kind of scenario. In the internal table when uploaded from flat file it will show '#' but it wont get split with '#' symbol in the program. However we solved the issue with the following class.
Data: c_tab value cl_abap_char_utilities=>newline,
it_string type table of string.
" if it_table1 is the table which contains the flat file data, then go throuhg this logic.
loop at it_table1 into wa_table1.
split wa_table1 at c_tab into table it_string.
endloop.
If the table is not getting split with cl_abap_char_utilities=>newline, then try using differnt attributes of that class ( like cl_abap_char_utilities=>cr_lf, cl_abap_char_utilities=>backspace so on ).
Hope this will help.
Regards,
Swarna Munukoti.
Edited by: Swarna Munukoti on Sep 13, 2008 5:54 PM

Similar Messages

Help needed to get unique record from an internal table

Hi Everybody,
I have to get unique record from an internal table. i know we can use read statement with key condition .
But the problem is i have to use some relational operators like GE or LE.
eg
read table itab into wa with key width GE itab-widthfrom
                                                   width LE itab-widthto
                                                   machno eq itab-machno.
Its giving me error when I use the operators GE , LE.( I think since it can't find a unique record with those relational
operators in the with key statement)
Is there any other way to get unique record from internal table without using the loop?
Thanks,
Sunny

Using the read statement you will need some kind of loop. For example.
DO.
READ TABLE......
WITH KEY ......
                    READ = SPACE
IF SY-SUBRC EQ 0
TABLE-READ = 'X'.
MODIFY TABLE
ADD 1 TO W_FOUND.
ELSE
EXIT.
ENDIF
ENDDO.
IF W_FOUND EQ 1.
...record is unique.
ENDIF.

Filtering records from one internal table based on ranges in another itab

Hi guys,
I have 1 internal table with set of GL accounts. I have 2nd internal table where lower interval and upper interval of GL accounts
How to filter out records from 1 internal table by comparing with the GL account ranges present in 2nd internal table.
Please reply.

Hi
Create a RANGE for GL Accounts.
LOOP the second Internal Table.
And assign HIGH & LOW to ranges from second ITAB.
And Delete the accounts which are not there in the range.
Use the below code as reference.
DATA: itab TYPE TABLE OF mara WITH HEADER LINE.
DATA: r_matnr TYPE RANGE OF matnr WITH HEADER LINE.
SELECT * FROM mara INTO TABLE itab UP TO 10 ROWS.
r_matnr-sign = 'I'.
r_matnr-option = 'BT'.
r_matnr-low = '000000000016900036'.
r_matnr-high = '000000000016900040'.
APPEND r_matnr.
DELETE itab WHERE matnr NOT IN r_matnr.

How to collect similar record from the internal table

I need to collect exact matched records from 1 internal table to another internal table by searching 5 fields. I need to have records which are exactly matched for 5 fields. i have written a code wich is mention below it gave me only similar records but not 100% matched record.. would you like to help me. any correction, suggetion,. Will be great help to me.

To get exact match of 5 records, do as follows.
Check whether internal table gives only one record or not after READ statement.If internal table gives more than one entry for READ then the results will be improper.
I think there is no need of READ statement on same internal table within LOOP. I commented the same in code.
sort i_bp_p by title initials name_last idnumber idtype f50code rbcode. "acc_num.
loop at i_bp_p into wa_i_bp_p.
*lv_tabix = sy-tabix.
*read table i_bp_p index lv_tabix into wa_i_bp_p.read table i_but0id into wa_but0id with key idnumber = wa_i_bp_p-idnumber
idtype = wa_i_bp_p-idtype binary search.
if sy-subrc = 0.
read table i_but000 into wa_but000 with key title = wa_i_bp_p-title
initials = wa_i_bp_p-initials
name_last = wa_i_bp_p-name_last binary search.
if sy-subrc = 0.
read table i_but0is into wa_but0is with key f50code = wa_i_bp_p-f50code
rbcode = wa_i_bp_p-rbcode binary search.
if sy-subrc = 0.
move-corresponding wa_i_bp_p to i_bp_p100.
append i_bp_p100.
endif.
endif.
endif.
endloop.
sort i_bp_p100 by partner.
loop at i_bp_p100.
write : /10 i_bp_p100-partner,
20 i_bp_p100-title,
30 i_bp_p100-initials,
40 i_bp_p100-name_last,
53 i_bp_p100-idnumber,
70 i_bp_p100-idtype,
85 i_bp_p100-rbcode,
95 i_bp_p100-f50code.
endloop.
sort i_bp_p by title initials name_last idnumber idtype f50code rbcode. "acc_num.
loop at i_bp_p into wa_i_bp_p.
lv_tabix = sy-tabix.
read table i_bp_p index lv_tabix into wa_i_bp_p.
if sy-subrc = 0.
read table i_but0id into wa_but0id with key idnumber = wa_i_bp_p-idnumber
idtype = wa_i_bp_p-idtype binary search.
if sy-subrc = 0.
read table i_but000 into wa_but000 with key title = wa_i_bp_p-title
initials = wa_i_bp_p-initials
name_last = wa_i_bp_p-name_last binary search.
if sy-subrc = 0.
read table i_but0is into wa_but0is with key f50code = wa_i_bp_p-f50code
rbcode = wa_i_bp_p-rbcode binary search.
if sy-subrc = 0.
move-corresponding wa_i_bp_p to i_bp_p100.
append i_bp_p100.
endif.
endif.
endif.
endif.
endloop.

How to delete records from dynamic internal table.

Hi Experts,
Need urgent help!!!
Issue is with Dynamic internal tables.
Below is code written by me :
FORM select_query USING Lw_tabnam
                  TYPE t682i-kotabnr.
DATA : lw_line TYPE REF TO data,
          lw_line1 TYPE REF TO data.
    CREATE DATA Lw_line    TYPE (lw_TABNAM).
    ASSIGN      Lw_line->* TO   <WA_tbl>.
    CREATE DATA LW_LINE    TYPE STANDARD TABLE OF (Lw_tabnam)
                           WITH NON-UNIQUE DEFAULT KEY.
    ASSIGN      Lw_line->* TO <TBL>.
    SELECT * FROM (Lw_tabnam)
             INTO CORRESPONDING FIELDS OF TABLE <TBL>
             WHERE (t_keys).
Endform.
code is working fine.
here even the table name and where condition are dynamic,everything is fine upto this point.
Now i have to delete some record from <TBL> based on some conditons.
     for ex : ( here lc_fieldname is KUNNR)
      loop at t_kunnr.
          lw_tabix = sy-tabix.
        Read table <tbl>
                with key (lc_fieldname) = t_kunnr-kunnr ASSIGNING <wa_tbl>.
        If sy-subrc = 0.
        *Delete
        delete <tbl> from <wa_tbl>
delete <tbl> index lw_tabix.
        Endif.
     Endloop.
The above delete statement doesn't work ,even we can't use index as it gives a syntax error " something related to "index is not allowed in standard table or hash table.
Can you help me ab't how to delete records in Dynamic internal table?
Other option that i am thinking of is to create a static table of type dynamic table.
means, data itab type standard table of <tbl> .I know the syntax is wrong ,however is there any way to do this?
Thanks in advance ,
If you have any suggestion ab't this then do let me know.
bye,
Gaurav.

Hi
I wrote this code and it works fine:
DATA LW_TABNAM(10) VALUE 'LFA1'.
DATA : LW_LINES TYPE REF TO DATA,
       LW_LINE TYPE REF TO DATA.
FIELD-SYMBOLS: <TABLE> TYPE TABLE,
               <WA>    TYPE ANY.
CREATE DATA LW_LINES TYPE TABLE OF (LW_TABNAM)
WITH NON-UNIQUE DEFAULT KEY.
ASSIGN LW_LINES->* TO <TABLE>.
CREATE DATA LW_LINE TYPE (LW_TABNAM).
ASSIGN LW_LINE->* TO <WA>.
DO 10 TIMES.
APPEND INITIAL LINE TO <TABLE>.
ENDDO.
SY-TABIX = 4.
DELETE <TABLE> INDEX SY-TABIX.
WRITE SY-SUBRC.
I hope it help you
Max

How to delete the matching records from two internal tables

Hi ,
I have two internal tables say A and B of the same type. If A has 10 records and B has 4 records , I want to delete the 4 records in B from A .
loop at B into wa .
delete A where key = wa - key .
endloop.
takes a long time if the table B is huge. how can I improve the performance.
Thanks.
Gayathri

Hi Gayathri,
You could try field-symbols. It reduces the data transfer from the internal table B to the work area.
field-symbols <fs_itab_b> like line of B.
loop at B assigning <fs_itab_b>.
delete A where key = <fs_itab_b>?-key.
endloop.
Regards,
<a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=zwcc%2fwm4ups%3d">anand Mandalika</a>.

Pick Common records from 2 internal tables

Hi,
I have 2 similar internal tables it_bseg1 (contain records based on the Posting Date BUDAT of document) & it_bseg2 (contain records based on the Customer Code KUNNR). Both these tables contains some common records. And I want these common records only. So please tell me to get the common records in the easiest way.
Regards,
Vishal

Hi,
There must be atleast one common field for these two internal tables to get the common records.
If you identify the common field then you can use this logic.
Loop at it_bseg1 into wa_bseg1.
Read table bseg2 into wa_bseg2 with key <commonfield > = wa_itab1-<commonfield>.
If sy-subrc eq 0.
Append wa_bseg1 to it_bseg3.
Endif.
Endloop.
Now it_bseg3 contains the common records.
If there is no use of it_bseg1 in your further development then you can do teh logic without declaring third internal table it_bseg3.
Loop at it_bseg1 into wa_bseg1.
Read table bseg2 into wa_bseg2 with key <commonfield > = wa_itab1-<commonfield>.
If sy-subrc ne 0.
delete it_bseg1 where <commonfield> = wa_itab1-<commonfield>.
Endif.
Endloop.
Now it_bseg1 contains teh common records of it_bseg1 and it_bseg2.
Hope this will help.
Regards,
Swarna Munukoti.
Edited by: Swarna Munukoti on Sep 3, 2008 2:05 PM

Getting the last record from the internal table

When we use a READ statement it always picks up the first record which fulfill its condition but in my case I want to pick up the last record that fulfills it condition
I have a internal table like
id     type
N1      A
N1      T
N1      A
N1      6 ----> LAST RECORD
my code is
read table itab wIth key id = netobjid.
for eg if netobjid = N1 , then I want to read the last record that corresponds to N1 ie ID N1 TYPE - 6...
How to do that?

HI
actually i have done same requirement like this ...
Take one count variable into your internal table ..you pass the number of records into cont variable for every time u enter the loop .
Sort the internal table with count variable descending . ( AS we cant sort the internal table with sy-tabix)
Then use read statement with sy-index = 1 .
USe below logic ,............
data : count type i value '0'.
LOOP at int .
count = count + 1 .
endloop.
sort int count descending .
read int with index = 1 .

How to split all the fields of output ls-l from an internal table

Hi all,
Using ls-l command i have brought the file attributes of a file like its read and write permissions,creation date ,path etc in a internal table.
Now how to split all these fields from the internal table or what should be the splitting criteria.
The field contents of internal table are like this:
-rw-rw---- 1 devadm sapsys 18360 apr 29......so on
I want to split this into different fields.
Kindly suggest.
Thank You.

Hi,
I think the delimiter will be space. For date alone (Apr 29) you need to concatenate after the string has been split.
Thanks and regards,
S. Chandramouli

Store the vital info from the absence quota record in an internal table

Hi experts,
I want to detrmine if the Absence records (PA2001 rec) deduction from date (PA2001-BEGDA) and absence to date (PA2001-ENDDA) are permissible for the validity period of the Absence Quota record (the PA2006 rec). If the quotas deduction from date, PA2006-DESTA, is greater than the PA2001-BEGDA, we then need to identify this absence quota record for change and change the deduction from date, PA2006-DESTA, to be the same as PA2001-BEGDA. Store the vital info from the absence quota record in an internal table and record the new date that the deduction from date that needs to be changed to. The changes will be made via a BDC session.
Please help me out...
Thanks,
Vicky

This looks possible if we code it in 'dynamic action' table, but the BDC may not read it during run time.
Do you still have this issue?
Thanks
Narasimha

Creating MS- Access data base from the Internal tables data of an ABAP Prog

Hi,
I have a requirement where I have to create Access tables from the Internal tables of ABAP program.
The tables are like Project systems Header data, WBS elements data, Netwrok data, Activity data, Milestone data and Project revunes. I will have the internal tables for these. I want to transfer these tables data into MS-Access tables onto Users desktop.
Please adivce me how to do this.
Thanks,
Prabhakar

HI,
I am trying to create a DB table in the access but I am not successful. The following is the format of the table needs to be created from the ABAP program.
I have created a table with the following format in MS-Access with the name tblHeader. Is it neccessary to create a DB table ( MS-Access) in advance or by using the FM STRUCTURE_EXPORT_ TO_MSACCESS we need to create a structure in MS-Access?
False tblHeader
Field Name Type Length
ProjectDef Text 255
ProjectDes Text 255
Created Text 50
Change Text 50
RespPerson Text 255
Profile Text 255
Plant Text 255
ObjNo Text 255
OverheadKey Text 255
I have created a Z table ZTAB1 with the same format from the SAP fields.
MS-Access Table name : tblHeader
ABAP program Internal table : t_tblheader
Z table Name : ZTAB1.
First I am trying to create a structure in MS-Access with the following FM.
CALL FUNCTION 'STRUCTURE_EXPORT_ TO_MSACCESS'
EXPORTING
dbname = 'D:\test\db2'
LANGU = SY-LANGU
dest = 'PS_ACCESS_1'
TABLES
tabname = ttblheader
EXCEPTIONS
system_failure = 1
comm_failure = 2
OTHERS = 3
Table ttblheader type is DFIES and I am filling the table with only one record and one field i.e TABNAME and the value is ZTAB1.
The source code of the FM is using another FM
CALL FUNCTION 'MSACCESS_STRUCT_ EXPORT_RFC' DESTINATION DEST
Here I am getting the Error message Object required. I can't able to create a table structure in MS-Access.
Next I am going to Use the FM
'TABLE_EXPORT_ TO_MSACCESS'
and it will create the records in the MS-access table.
CALL FUNCTION 'TABLE_EXPORT_ TO_MSACCESS'
EXPORTING
dbname = 'D:\test\db2'
langu = sy-langu
dest = 'PS_ACCESS_2'
tabname = 'ZTAB1'
reftable = 'tblheader'
FLG_NO_DOWNLOAD = ' '
FLG_APPEND = ' '
FLG_POPUP = ' '
TABLES
dtab = t_tblheader
here t_tblheader is the internal table.
Reftable = tblheader is the table which i have created in advance. ( not by using the First FM)
In this FM i am getting a error message : Unable to connect to Database D:\test\db2.
Please help me how to create the MS-Access database.

Deleting from Dynamic Internal table

Hi,
How can we delete data from dynamic internal table...
I have a dynamic internal table <fs_dyn_table> which is of type any and can have any fields...
I want to delete all those records which have a value of '10' in a field named field1
I have written my delete statement in the following manner..
DELETE <fs_dyn_table> WHERE field1 = '10'.....but it is not working...it gives me an error...stating that the line type of table must be statically defined.

Hi,
Loop on the internal table into a field-symbol of line type same as the internal table.
Use assign component statement and then delete the corresponding record.
Regards,
Ankur Parab

INSERT works for only last record of the Internal table ...??

I am trying to insert data from an internal table JTAB to a Databse Table
in CRM. The name of the databse table in CRM is CRMD_PARTNER
For this i first declared an internal table JTAB with same structure as that of
the databse table CRMD_PARTNER
DATA: BEGIN OF JTAB OCCURS 0,
     INCLUDE STRUCTURE CRMD_PARTNER,
      END OF JTAB.
Then I filled my JTAB with the required entries. For filling the JTAB i am
getting data from couple of other tables and filling the internal table JTAB
     loop at ktab.
here i am filling values in JTAB and then i say APPEND JTAB.
        endloop.
     Till here every thing works well and my internal table JTAB has all values that
I need to insert to the CRMD_PARTNER table. Also my JTAB has vales for all primary key fields.
Now I write a condition like below.
if not jtab[] inital.
MODIFY CRMD_PARTNER from TABLE JTAB.
COMMIT WORK.
endif.
Here comes the problem...once this code is executed and once program totally executes...
i always see that only last record in JTAB is being inserted to the databse table CRMD_PARTNER.
When i check in the debugger ..i see that the loop is being executed only once
and the SY-TABIX of JTAB is being always set to the length of JTAB and
that is why only last record is being inseretd to the table CRMD_PARTNER.
Now what should i do ..to insert all records of JTAB to CRMD_PARTNER table?
is there a way i can restet the SY-TABIX and make the modify statement work for all records of JTAB?
Finally i hardcoded the values in JTAB then i dont have any problem and all records of JTAB are being
inserted into the database table.
only if i am dynamically fetching the values into JTAB(by Putting in loop..endloop statements and
pushing values to JTAB and APPENDING JTAB ) i have a problem .
in this case also my JTAB is being correctly filled with values ..but when i try to
insert theses values to CRMD_PARTNER with MODIFY stmt ..only always last record is being inserted.
i tried with INSERT instead of MODIFY and i am getting runtime error.
kindly pease help.
Regards,
Jessica Sam

yes a@s i am really struggling from last 3 days.
I actually want to create a sales order in CRM and want to
assign ship to party for each line item in a sales order in CRM
for that i used the standard bapi BAPI_BUSPROCESSND_CREATEMULTI and i am able
to create an order successfully, but i see that the ship toparty
that i give at header is being copied to each line item.
but this is not what is expected.
So finally i tracked in which table the ship to party gets stored in each line item
and then tried to insert the records directly into databse. and it worked
but only if i am hardcoding..but not when i am dynamically fecthing the values into JTAB for insertion,
Can yoy help ..if you have any idea why insert/modify is processing only last record?
any help will be highly appreciated.
Regards,
Jessica Sam

Count the Records in an internal table without a loop.

How do i count the number of records in an internal table without using the loop statement.
The Describe statement give the total no. of records in the internal table.But i want the count of the key fields in the internal table
For eg
Row Field
1       A
2       A
3       A
4       B
5       B
6       C
Count of A = 3
Count of B = 2
Count of C = 1

Dilip,
I think isn't posible. Only 3 ideas:
1ª, make other table "table2", similar to your actual table.
     table2[] = yourtable[].
     delete table2 where key <> 'A'.
     describe table table2 lines contA.
    But depending the amount of data, you may have problems in performance or memory consumption...
2ª, make other table, only with the keys fields and a count field,
    data begin table2
       key_field1,
       cont type i.
    end data.
   when you append lines to yourdata, make a collect to this table:
    table2-keys = yourtable-keys.
    table2-cont = 1.
   collect table2.
   But only works if you can modify the program where data is appended, and you may be carefull when data is deleted :-(...
3ª if your data if filled in a select, you may fill the table2 of point 2ª, making a similar select but:
   select keyfields count( * ) into table table2
from ...
where (the same you have to fill your original table...)
   group by keys.
But you have the same problem is data is deleted later...
I hope that any of the three is useful for you...
Edited by: Diego Alvarez on Jan 5, 2010 5:09 PM

Maximum record length in internal table?

Is there a maximum record length in an internal table? Please note: My question is NOT related to table space. I'm referring only to the length of an individual record (A.K.A. row length).
I am using a work area to insert data into an internal table. Both the work area and internal table are defined by the same structure.
The structure has a total length of 672 bytes. For the sake of this discussion I'll point out that at the end of the structure, bytes 669, 670, 671, and 672 are four separate fields of 1 character each.
When viewing the work area record in the debugger I'm seeing all the fields and all the values. When viewing the internal table in the debugger after a record is inserted, the internal table ends with the field defined at Byte 670. The internal table does not include the two fields defined at Bytes 671 and 672.
Am I to assume from the above explanation that the length of a record ( A.K.A. row) in an internal table cannot exceed 670 bytes?
Thank you.

Manish,
False alarm! While, technically, you didn't answer my question, your request for code ended up helping me answer my own question.
To provide you with some code I wrote a simple test program using the record layout referred to above, with a DO loop to put some records into the internal table, followed by a LOOP AT, with accompanying WRITE statements to display the contents of the internal table and demonstrate that the last two fields weren't being stored.
However, when I ran the test program, the last two fields were being displayed.
It was at that point, when stepping through the debugger that I noticed the scroll arrows above the last column of my internal table that allowed me to scroll to the right and see my final two fields.
Apparently, because of the large number of fields in my internal table I had reached the default display length of the debugger. While I was obviously aware of the scroll bar found at the bottom of the display, I had never worked with an internal table of that width in the past and hadn't even noticed the scroll arrows above the last column before.
Thanks for taking the time to respond helping me get to the solution.

Error in splitting records from an internal table

Similar Messages

Maybe you are looking for