Error in SRM iView calling https screen from R/3 backend.

Hello All,
I have deployed on SRM Bussiness Package on EP and connected R/3 SRM Server with Ep vis system.
When i check connection test for system it shows connectioin successfull, But when i navigated to one of the Role present in BP and tried to a preview on iView which in turn calling screen from R/3.
That screen is working fine in R/3 that use https:// connection in Bckend and working fine there.
But when i click on iView in Ep it is throwing error .
I have pasted Error Log from NWA under.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Full Message Text
06:15_06/08/09_0093_205774451
[EXCEPTION]
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL ':///sap/bc/bsp/sap/srmsus/default.htm' is not valid! Please check the protocol and host entries for system 'SAP_BW'.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:123)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Thanks in advance.
Vinit

Hello Sandeep,
Thanks for ur fast reply.
i have navigated to the path you told in SICf but i cant find any node under srmsum .
srmsum is the only node, no subnode in it.
I have deactivated and activated srmsum node i can test it success fully in SICF but it does not have default.htm page in SICf but it does in SE80.
And other thing is regarding SAp_BW system that i am useing is the aliase that i have used for system connecting SRm server SA_BW is just the aliase name and nothing have to do with Bi functionality.
Pls suggest.
Thanks in advance.
Vinit.

Similar Messages

Call multiple screens from LSMw

Hi
i want to call multiple screens from lsmw
I need to call a three transaction from LSMW wich are subzequent steps for data entry.
1) first tcode to be called is eprodcust which creates some master data and using this master data and some fields of data creatd i need to call two more tcodes first iq01 to create meter and save then eg31 tcod to feed data.
Please suggest where in lsmw can i give options for suc hscnerio and call of subsequent screens.
regards
Edited by: Prieti_V on Nov 8, 2011 8:28 PM

Hi Priti ,
we have few options to handle such cases , to avoid Locked Problems what you can do is
-->write BDC program within LSMW to create installation ( this will be created within step of 11 Convert Data ).
-->Based on the above BDC results ,run another BDC within LSMW to create Device.( this will be created within step of 11 Convert Data ).
-->third BDC records , let SAP do it thru LSMW or can you do it convert data step itself.
this approch needs lots of codes , so in worst case and if you dont want to break the loadings the follow this.
*Better to find any BAPI which will do creation of installation ,devices
regards
Prabhu

Can we call normal screen from subscreen

hi,
can any body tell how to call normal screen from subscreen in Dialog Programming
thanks in Advance,
Subodh.

Hi,
use stmt like":
call screen '1001'.
But this will be diplayed as new screen and not as subscreen.
Jogdand M B
Message was edited by:
Jogdand M B

Probe in calling tabstriped screen from another screen ..

hi
could any one please help me ,,,that what is the logic for calling tabstriped screen from another screen ..
Thanks N Regards
Priya

Hi,
Jonathan.
Thanks for the response ...
I did execute with call screen statement ...(CALL SCREEN 0123). ..when i excute the program its working fine ,but the same programe when I execute with the T.CODE ...its giving erorr ...
ERORR:Program " ZTEST "tried to use screen 000.
        the screen doesn't exist.
HERE IS CODE.
let me know where is the mistake ..
could you please , help me ,,what i suppose to do .
let me know where is the mistake ..
REPORT ZTEST .
DATA: DATE LIKE SY-DATUM,
       TIME LIKE sy-uzeit.
DATA number TYPE sy-dynnr.
CONTROLS tabstrip TYPE TABSTRIP.
tabstrip-activetab = 'TAB1'.
number = '1003'.
tabstrip-activetab = 'TAB2'.
number = '1004'.
CALL SCREEN 1000.
*&      Module STATUS_1000 OUTPUT
      text
MODULE STATUS_1000 OUTPUT.
CASE : SY-UCOMM.
    WHEN 'ENTER'.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'MOD'.
          DATE = DATE.
          TIME = time.
          SCREEN-INPUT = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
ENDCASE.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_1000 OUTPUT
*&      Module USER_COMMAND_1000 INPUT
      text
MODULE USER_COMMAND_1000 INPUT.
CASE SY-UCOMM.
    WHEN 'ENTER'.
      LEAVE TO SCREEN 1001.
endcase.
ENDMODULE.                 " USER_COMMAND_1000 INPUT
*&      Module USER_COMMAND_1001 INPUT
      text
MODULE USER_COMMAND_1001 INPUT.
CASE SY-UCOMM.
        WHEN 'button1'.
        CALL SCREEN 1002.
    ENDCASE.
    ENDMODULE.                 " USER_COMMAND_1001 INPUT
*&      Module USER_COMMAND_1002 INPUT
      text
MODULE USER_COMMAND_1002 INPUT.
    CASE sy-ucomm.
      WHEN 'TAB1'.
        number = '1003'.
      WHEN 'TAB2'.
        number = '1004'.
    ENDCASE.
    ENDIF.
ENDMODULE.                 " USER_COMMAND_1002 INPUT
*&      Module STATUS_1002 OUTPUT
      text
MODULE STATUS_1002 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_1002 OUTPUT
Thanks N Regards.
Priya.

Call a Screen from A selection screen report

Hi Friends,
I developed a report (1. Excecutable) and i am calling a screen say 9000 which is having several subscreens. While i am clicking the BACK button it should come to the same selection screen report. How to do this? We can't use LEAVE SCREEN or LEAVE TO SCREEN 0. Because 9000 screen having the subscreen. If i use LEAVE PROGRAM it won't come to selection screen. Instead it will come out of program.
Please help me.
Thanks and regards
Srikanth. S

hi srikanth,
We can come from screen to selection screen of the report by using -- "LEAVE TO LIST PROCESSING".
If u need some more info plz check below.
https://www.sdn.sap.com/irj/sdn/forums
https://www.sdn.sap.com/irj/sdn/forums
https://www.sdn.sap.com/irj/sdn/forums
Reward if it is usful,
Thanks,
Srikanth.A

Error while executing the call list maintenance from the UI ???

Hello All
I am using CRM 6.0
I am want to open the call list maintenance from the IC manager screen the system sues transaction launcher to open it, the URL link defined in the back end is :
sap/bc/gui/sap/its/webgui/!?~transaction=CRMD_TM_CLDIST
but when the system calls the transaction, I got the error:
Transaction CRMD_TM_CLDIST?SAP-C is unknown
Then I have the SAP menu
Regards
Jacopo Françoise

Hi
i think this transaction can be called only in SAP GUI.
SAP has left some transactions (especially those for managers) in SAP GUI.
Regards
Radek

RFC iView calling SAP screen

Hello all,
We have a RFC that calls a SAP screen. Is there a way showing this screen from a RFC iView? Parameter I can set on the iView, connector, SAP system?
Other RFC'S work great, but this one contains a SAP popup.
Thanks!
Martin

if there is a screen processing it will not work with RFC iview. (general rule of RFC is not to have screens in them)
Regards
Raja

Calling Java screens from Oracle Forms application

I am working with a client that has a large Oracle forms application. Since rewriting the entire application in Java is not an option at this time, the strategic direction is that any new modules that are to be created for the application are to be done in Java and called from the Forms menu. The decision as to what tool to use to develop the Java modules is still under debate. What is the best (most seamless) way to do this...calling a Java screen from a Forms application? If anyone has any experience in this, or can direct me to some literature on it, it would be greatly appreciated. Thanks.

This is a web app in Forms/Reports 10g R2 running off Oracle AS and an Oracle db. The challenge for us is that the direction is that any new enhancements (screens) are to be built using Java (in either ADF Faces or Swing, another point for debate later) and then called from the Forms app. The business client is only paying for the enhancement. They don't care about moving off Forms to Java, so any extra work on the part of IT to do this, has to be fairly minimal and doable within the project budget. The movement to Java is an IT direction. Is there a way to do this without having to build a java framework for the entire Forms application (which I assume would take some time and involve retesting the entire app)?

Back on a CALL SELECTION-SCREEN from an ALV

Hi all,
I have created a program with a normal selection-screen (1000).
According to the selected values, when I press "Execute" I go to a next selection-screen (2000) with instruction CALL SELECTION-SCREEN 2000.
Then I display an ALV.
When I press the back button, I want to go back to screen 2000, but actually I go directly to screen 1000.
PARAMETERS : p_choic1 RADIOBUTTON GROUP cho DEFAULT 'X'.
PARAMETERS : p_choic2 RADIOBUTTON GROUP cho.
SELECTION-SCREEN BEGIN OF SCREEN 2000.
PARAMETERS : p_table TYPE char10.
SELECTION-SCREEN END OF SCREEN 2000.
START-OF-SELECTION.
IF NOT p_choic1 IS INITIAL.
    CALL SELECTION-SCREEN 2000.
    PERFORM alv_process.
ENDIF.
Have you got any idea of what I can do to return to screen 2000 from the ALV after pressing Back button ?
Thanks.

Hi,
Follow below sample code...
SELECTION-SCREEN BEGIN OF SCREEN 2000.
PARAMETERS p_mat TYPE matnr.
PARAMETERS p_enam TYPE ernam.
SELECTION-SCREEN END OF SCREEN 2000.
START-OF-SELECTION.
set PF-STATUS 'STATUS'.
WRITE:/ p_mat,
          p_enam.
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'S2000'.
      CALL SELECTION-SCREEN 2000.
WHEN 'EXIT'.
      EXIT.
ENDCASE.
Ram.

Reg: calling selection screen from the second list

Hi all,
How can we call the selection screen from the second screen.
Can any one help me to solve this problem.

HI RJ,
Try .....
case sy-ucomm.
WHEN '&F03'.
LEAVE TO SCREEN '0'.
endcase.
after the FM for grid-display
i m using the same .....
i hav selection-screen..then alv grid screen 1 then again another screen with alv grid display..
bt in my code for first alv grid ...i m using REUSE_ALV_GRID_DISPLAY_LVC
as
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
      EXPORTING
        i_callback_program       = sy-repid
        i_callback_pf_status_set = 'SET_PF_STATUS'(303)
        i_callback_user_command = 'USER_COMMAND'(304)
        i_grid_title             = 'Reconcilation Report'(305)
        is_layout_lvc            = it_layout
        it_fieldcat_lvc          = gt_fieldcat3[]
      TABLES
        t_outtab                 = gt_msg[].
here i musing set_pf_status to add one pushbutton to the screen. in ur case u can avoid that...
after that
*&      Form set_pf_status
      text
     -->EXTAB      text
FORM set_pf_status USING extab TYPE slis_t_extab.           "#EC NEEDED
SET PF-STATUS 'STANDARD_FULLSCREEN'.
*get back to Selection Screen
case sy-ucomm.
    WHEN '&F03'(328).
      LEAVE TO SCREEN '0'.
endcase.
ENDFORM.                    "set_pf_status
its working for me..
Thnx
Rohit...
Edited by: Rohit Kumar on Oct 29, 2008 3:20 PM

Calling HTTPS webservice from BPEL

Hi All,
We have enable SSL on soa 11g and its working fine.
We have developed and deployed a process on same soa server, Now we are trying to invoke this service (process) in another BPEL process.
While developing the second BPEL process in jdev we are not getting any error but while deploying (on the same server) its throwing error.
The second process gets deployed without any error if we dont call the HTTPS webservice(first BPEL process).
Please help.
Error desc:
Error during deployment: Deployment Failed: Unable to find a WSDL that has a definition for service {http://oracle.com/sca/soapservice/TSystemOrderProcessing/TSystemOrderProcessing/receivePO}receivePO and port execute_pt. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate the HTTP proxy settings for the server..
[05:30:06 PM] Check server log for more details.
Regards,
Surendra

Hi Surendra,
It seems that WSDL for service receivePO is not available at the deployment time.
Below threads should help you out -
Partner Link in 11g
SOA 11g FOD Demo Deploy Issue
Regards,
Anuj

How to call custom screen from User exit?

Hai,
I have to call a custom screen from user exit include after the delivery save.
Depends on the data in the delivery,
if the data satisfies certain conditions I will call the screen otherwise no.
Could any one please tell me how to do this?where to create screen & how to link it here?
Regards,
Bhaskar.

Hi,
Please check with the following Enhancements -
V50PSTAT - Delivery: Item Status Calculation
V50Q0001 - Delivery Monitor: User Exits for Filling Display Fields
Rewards if it helps
Regard
Goutham

Can we call sap screens from our own abap program?

Hi... Friends...,
I want to develop one program...
In that program my selection screen contains transcation code and screen number as input parameters.
so now if i give inputs as...
> VA41
> 4001
for given T'code and screen number...
I hav to get that screen directly!
other wise it has to give error message like...
> NO SCREEN EXISTS FOR VA41 WITH GIVEN SCREEN NUMBER
Is it possible???
If possible... guide me the logic...!
Thanks,
Naveen.I
Edited by: Naveen Inuganti on Jul 14, 2008 11:15 AM

No no.. thats ok...
we can call screen and we can update...
But in VA01 or in VA41 .. we are having more than 10 screens... can i call them with my selection screen inputs...?
let me tel you one situation.
I am having billing plan in VA41 screen's 4002nd screen so now i know the screen number and t'code here.
So if i want to know the field documnetation or technical details of billing plan field... i hav to go through va41 transaction...
can i do that from my program with one step?
And...,
one more thing here we know that there will be some mandatory inputs for screens to get the screen which we are calling!
So this reuirement may not possible for that kind of screen!
Even.... I want your suggetions!
Thanks,
Naveen.I

Getting error code 1 when calling SSIS package from a stored procedure (SQL Server 2008 R2)

Hello,
I am trying to execute a SSIS package from SQL Server 2008 R2 stored procedure but getting error code 1 (as per my knowledge, error code description is as below:
0 The package executed successfully.
1 The package failed.
3 The package was canceled by the user.
4 The utility was unable to locate the requested package. The package could not be found.
5 The utility was unable to load the requested package. The package could not be loaded.
6 The utility encountered an internal error of syntactic or semantic errors in the command line.
Details:
I have a stored procedure named "Execute_SSIS_Package" (see below sp) which executes 'Import_EMS_Response' SSIS package (when I execute this package directly from SQL Server BID it works fine it means package itself is correct) and calling
it from SQL as:- EXEC Execute_SSIS_Package 'Import_EMS_Response'.
Here I receives error code 1.
Can anyone help me to resolve this issue please?
Thanks in advance!
CREATE PROCEDURE [dbo].[Execute_SSIS_Package]
@strPackage nvarchar(100)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @cmd VARCHAR(8000)
DECLARE @Result int
DECLARE @Environment VARCHAR(100)
SELECT @Environment = Waarde
FROM Sys_Settings
WHERE Optie = 'Omgeving'
--print @Environment
SET @strPackage = '"\W2250_NGSQLSERVER\BVT\' + @Environment + '\' + @strPackage + '"'
SET @cmd = 'dtexec /SQL ' + @strPackage + ' /SERVER "w2250\NGSQLSERVER" /Decrypt "BVT_SSIS" /CHECKPOINTING OFF /REPORTING E'
--print @cmd
EXECUTE @Result = master..xp_cmdshell @cmd, NO_OUTPUT
--print @Result
END

It has something to do with the security.
E.g. cmdshell is not enabled or the caller has not rights over the package.
There could be a syntax error, too.
I suggest you make the package runnable off a SQL Agent job then trigger the job from the stored proc with
sp_start_job <job name>
Arthur
MyBlog
Twitter

Error while trying to call Java Class from Peoplecode

Gurus,
I am trying to read a property file from peoplecode using standard java classes. However, I am getting this error more than one overload matches
Below are 2 ways in which I tried doing this and both ended up in the same error
Code 1>_
     Local JavaObject &file = CreateJavaObject("java.io.File", "D:\\psft.properties");
     Local JavaObject &properties = CreateJavaObject("java.util.Properties");
     Local JavaObject &reader = CreateJavaObject("java.io.FileReader", &file);
     &properties.load(); Error thrown : "Calling Java java.io.FileReader.<init>: more than one overload matches"
Code 2>_
     Local JavaObject &file = CreateJavaObject("java.io.File", "D:\\psft.properties");
     Local JavaObject &properties = CreateJavaObject("java.util.Properties");
     Local JavaObject &properyFile = CreateJavaObject("java.io.FileInputStream", &file);
     &properties.load();
Error thrown : "Calling Java java.io.FileInputStream.<init>: more than one overload matches."
The above error is thrown on the 3rd line when I try to invoke the FileInputStream or FileReader class/constructor.
In fact both the above code pieces work absolutely fine when I write them into a java class and run them on a java runtime. Any inputs would be of great help !! Alternatively, I will have to use peoplecode file.readline(), etc to read the property file. Since java has this smarter way to reading a property file, I thought of giving it a try ..
-Sudripta

I tested this on one of my windows servers using PT 8.50:
Local JavaObject &joCurrFile = CreateJavaObject("java.io.File", "c:/temp/test-date.txt");
Local JavaObject &jlongtime = CreateJavaObject("java.util.Date");
Local number &modifytime = &jlongtime.getTime();
MessageBox(0, "", 0, 0, "original time: " | &joCurrFile.lastModified());
Local boolean &filemodified = &joCurrFile.setLastModified(&modifytime);
MessageBox(0, "", 0, 0, "&modifytime: " | &modifytime, "");
MessageBox(0, "", 0, 0, "&filemodified: " | &filemodified, "");
MessageBox(0, "", 0, 0, "new time: " | &joCurrFile.lastModified());Here are the results:
PeopleTools 8.50.05 - Application Engine
Copyright (c) 1988-2010 PeopleSoft, Inc.
All Rights Reserved
original time: 1287677026144 (0,0)
Message Set Number: 0
Message Number: 0
Message Reason: original time: 1287677026144 (0,0) (0,0)
&modifytime: 1287677277845 (0,0)
Message Set Number: 0
Message Number: 0
Message Reason: &modifytime: 1287677277845 (0,0) (0,0)
&filemodified: True (0,0)
Message Set Number: 0
Message Number: 0
Message Reason: &filemodified: True (0,0) (0,0)
new time: 1287677277845 (0,0)
Message Set Number: 0
Message Number: 0
Message Reason: new time: 1287677277845 (0,0) (0,0)
Application Engine program DSS_TEST_IO ended normallyDoes your app server have permissions to modify the files you are trying to modify? Also, how did you verify the date/time of the files? Were you using Windows Explorer? Did you refresh the view first? Or did you use the console dir/ls? I seriously doubt there is a security manager in place that would restrict what you can do with Java. Security managers are common in applets/browser context, but not in apps.

Error in SRM iView calling https screen from R/3 backend.

Similar Messages

Maybe you are looking for