Error in syncrhronous message retrieving data of AS400

Hello guys,
I have an scenario where I receive a message from a JMS queue in XI, this message goes to a BPM and in the BPM I send a synchronous message to database with AS400 to retrieve a very big file.
The problem is that after 3 minutes we have the error an error in the JDBC adapter:
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.MessageExpiredException: Sync application request expired.. Setting message to status failed.
If the request is less than 3 minutes there is no error in the JDBC adapter. Do you know if there is any parameter in XI that we have to modify?
The data we retrieve is more than 100 megabytes. This could be a problem?The really strange is that in the adapter we seen that the request has been processed successfully, but after we have the error.
Somebody had the same error? Anybody knows how to solve it?
Many thanks in advance.
Regards,
Xavi.

Hello guys,
now I don't have the timeout but I have another error.
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">PART_BOUNDARY_NOT_FOUND</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Boundary SAP_c1870c01-c051-11dd-9b08-6e04941dd8e9_END not found</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
Do you know what could be the problem?
I go to the JDBC adapter and the select has been processed successfully, but now I have this error.
I have a BPM with a synchronous abstract message and two asynchronous abstract, one for the request and other for the response. With the responses I put an action send to send it to a proxy.
Do you know why I have this error?
Many thanks in advance.
Regards,
Xavier.

Similar Messages

EVDRE error "encountered problem when retrieving data from webserver"

Hi,
in a EVDRE we always get the error "encountered problem when retrieving data from webserver"
When analysing this further we noticed this is always generated when a base member is selected in the CV and the expansion on the row for this dimension is has one of the following expansion settings:
DEP
ALL
NOEXPAND
if we select SELF, the error disappears again and the EVDRE works fine again ... is this normal behavior?
there is no problem with application nor dimension.
D
solved it

Note that the keyword "ALL" does not include the member itself. This may cause some confusion, but as Harish implies, when you select a base member it finds no matches if your memberset is "ALL".
If you want to design a report to handle the user moving back and forth between base and non-base members in their CV, you either need to include SELF,ALL or SELF,DEP, or something similar....
OR you need to get a little fancier, and use EVPRO to look and see if the CV member is base -- evpro(app,member,"CALC") -- and then use some conditional logic in Excel to choose the correct expansion options. If Calc=N, use Self, otherwise use SELF,DEP or whatever you choose. This can be a bit tricky if you then want the user to be able to drill down in the report (especially if you want the workbook option to insert add'l rows on the expansion, rather than replace), but it's all possible.

6024E - Error 10846: Unable to retrieve data fast enough error?

I am using a PCMCIA DAQ 6024E on a Dell Latitude C610 (1Ghz) - I'm trying to do Double buffered analog acquisition over 4 channels
Whenever I try to run the application (VC++6) i get "Error 10846 - Unable to retrieve data from the backgound acquisition buffer fast enough..."
I have tried the sample program "Double-Buffered Asynchronous Scanning in Microsoft Visual C++ with NI-DAQ" downloaded from the NI website - has the same result: Error 10846...
I just need to sample 4 channels at 1kHz continuously, extracting the data every 250ms max - are the following settings sensible:
i16 iChan = 0;
i16 iNumChans = 4;
u32 ulCount = 2000
i16 iUnits = 0;
f64 dSampRate = 4000.0;
f64 d
ScanRate = 1000.0;
static i16 piBuffer[2000] = {0};
static i16 piHalfBuffer[1000] = {0};
Tried loads of different variations - as well as stopping all other apps running and removing everything from inside the acquisition loop - don't know what to try next. Can anyone help? Cheers!

Hi,
The error you are getting is due to the fact that your application is not emptying the PC buffer fast enough so new data overwrites old data before they are copied to the application allocated memory. You can try increasing the buffer size and/or reducing the Scan rate, whichever possible.
Regards,
RamziH.

Error message-retrieve data from database

I tried to retrieve data from oracle database. I got the following error message. I did compile the files without error. but when I run index.jsp I got the following error message. is it related with taglib Directives ?
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Exception in JSP: /index.jsp:8
5: <% AccessDB accessDB=new AccessDB(); %>
6:
7: <%-- create an instance of List, then retrieve SubjectNames --%>
8: <% List subjNames=accessDB.getSubjectName(); %>
9:
10: <%-- make list accessible to page --%>
11: <% request.setAttribute("subjNames", subjNames); %>
Stacktrace:
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
root cause
java.lang.NullPointerException
     org.AccessDB.getSubjectName(AccessDB.java:68)
     org.apache.jsp.index_jsp._jspService(index_jsp.java:62)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.17 logs.
Apache Tomcat/5.5.17

Hi,
Try to print the value in List...n comment the request.setAttribute...n then run the program....
check wot value is printed in List....
This error may b because the List doesnt have anyvalue into it.....

Error while trying to retrieve data from BW BEx query

The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
In BEx report there is a limitation but is it also a limitation in Webi report.
Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
A database error occured. The database error text is: The MDX query SELECT { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)

Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry

Crystal Reports 2008 - C-ISAM/ODBC Error 42000 Failed to retrieve data

I'm hoping someone out there has a solution to this problem.
I have a bunch of reports which I've converted from CR8.5 to CR2008 (SP2 + HotFixPack 2.7 Installed)
Our server is currently running SCO UNIX OpenServer 5.0.7 with a C-ISAM Database serving our accounting software.
Some of the more basic reports have converted with no problem (daily sales figures etc...), but some reports such as customised purchase orders, and complex sales histories etc... continue to have this problem.
Note, all my reports functioned perfectly under CR8.5.
This error occurs within seconds of executing the report.
FAILED TO RETRIEVE DATA FROM THE DATABASE
Details: 42000:ERROR Syntax Error - Database Vendor Code: -1
After which, the winsock comms need to be reset.
One example SQL query is as follows (on a report re-designing my purchase order for imported products.
SELECT purchase_order.po_order_no, purchase_order_line.stock_code, purchase_order.po_backorder_flag,
purchase_order_line.po_line_description, stock_master.stk_desc_line_3, stock_master.stk_description,
stock_master.stk_desc_line_2
FROM (purchase_order_line purchase_order_line INNER JOIN purchase_order purchase_order ON
(purchase_order_line.po_order_no=purchase_order.po_order_no) AND (purchase_order_line.po_backorder_flag=purchase_order.po_backorder_flag))
INNER JOIN stock_master stock_master ON purchase_order_line.stock_code=stock_master.stock_code
Does anyone have any idea??? Really driving me insane... Is it the order of my links, type of links, grouping??????
Strangely, some other similarly linked reports work perfectly.
Cheers in advance,
Steve

Hi Steve,
If you open the Report and then click on DataBase, Log on and connect first. Then open your report, then Database, Set Location and once it's done then Verify the Database. Fix any errors or warnings that may pop up.
Lots of changes between 8.5 and 2008. CR detects that the report is the old format and it then goes through an series of internal report upgrade routines to convert all functions to the current format.
Also, all of the database drivers were re-written to take advantage of the updated functionality and Client enhancements. As well as we removed any "custom hacks" that we did back then to fix "issues" int he DB client drivers at the time. All of those "fixes" were removed, to much work to maintain them all, now if there are issues it's usually due to the DB Client not following ANSII 92 Standards.
One issue that does show up from time to time is that the order you inserted the tables can have an affect on how CR generates the SQL, may not be the case for your issue though, just something to watch for.
What happens if you create a new report and use that same SQL, save it, close all, re-open the report and run it. Do you get the same errors?
Also note: you did not say if you also updated the ODBC driver? As of CR 9 we are UNICODE compliant, may be your client needs to be updated also. Also verify it's using ODBC 3 and not ODBC 2 standards.
Thank you
Don
Edited by: Don Williams on May 6, 2010 7:21 AM

Error when trying to retrieve data from Essbase

Hi There
I running OBIEE 10.1.3.4.0 and Essbase 9.3.1. When im trying to update member count for instance(from administration tool) it gives me the following errors.
nQSError 10058, nQSError 43093 and Essbase Error 1260046. This is when im testing against an Essbase I have developed for my self. If I try using one of the supplied sample databases it works fine...
Does anybody have an idea about what could be wrong?
Any pointers would be much appreciated!
Regards, Jacob

Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry

Try to retrieve data from database got error message

Try to retrieve data from database got error message *"java.lang.ArrayIndexOutOfBoundsException: 2*
*     sun.jdbc.odbc.JdbcOdbcPreparedStatement.clearParameter(JdbcOdbcPreparedStatement.java:1023)*
*     sun.jdbc.odbc.JdbcOdbcPreparedStatement.setDate(JdbcOdbcPreparedStatement.java:811)*
*     guestbk.doGet(guestbk.java:32)*
*     guestbk.doPost(guestbk.java:73)*
*     javax.servlet.http.HttpServlet.service(HttpServlet.java:710)*
*     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)"*
I have used prepared statment
java.text.SimpleDateFormat sdf = new java.text.SimpleDateFormat("dd/MM/yy");
            java.util.Date dt = sdf.parse(str3);
                   Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                   con=DriverManager.getConnection("jdbc:odbc:gbook");
                   //Statement stmt=con.createStatement();
PreparedStatement ps = con.prepareStatement("SELECT * from gbook where emailid =? AND date =?");
ps.setString(1,str1);
ps.setString(2,str2);
ps.setDate(3,new java.sql.Date(dt.getTime()));
//ps.executeQuery();
                   //ResultSet rs=stmt.executeQuery("select * from gbook where emailid = str1");
              ResultSet rs = ps.executeQuery();
                   out.println("<Html>");
                out.println("<Head>");
                   out.println("<Title>GuestBook</Title>");
                   out.println("</Head>");
                   out.println("<Table border=1 align=center >");
                   out.println("<H4><B><center>Teacher's Lesson Plan</center></B></H4><BR>");
                   out.println("<TR><TD><b>Teacher Name</b></TD><TD><b>Class</b></TD></TR>");
           while(rs.next())
                    ctr++;
                    String email=rs.getString("emailid");
                    String cmt=rs.getString("comment");
                    out.println("<TR><TD>"+email+"</TD><TD>"+cmt+"</TD></TR>");
        }Please anybody help .

PreparedStatement ps = con.prepareStatement("SELECT * from gbook where emailid =? AND date =?");
ps.setString(1,str1);
ps.setString(2,str2);
ps.setDate(3,new java.sql.Date(dt.getTime()));Your SQL query has 2 placeholders but you try to set 3 values.
And didn't you read the stack trace?
guestbk.doGet(guestbk.java:32)You could've tracked down line 32 and seen what was there at that line.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://www.catb.org/~esr/faqs/smart-questions.html
----------------------------------------------------------------

Failed to retrieve data from the database error message

Hello,
I have a fairly simple report that correctly retrieves the data from the database providing that there are no selection formula.
However, as soon as I add the record selection formula:
{fireService.serviceDate} >= DateTime (2009, 10, 3, 0 ,0 ,0)
I get the following errors:
Failed to retrieve data from the database
Cannot determine the queries necessary to get data for this report. Details: An invalid range operator has been encountered.
However, when I use the Database / Show SQL Query option and copy the query directly into the sql query analyser it works perfectly.
Any ideas?

I am using a table to select the records from.
In fact it is a series of joined tables.
The SQL Query generated is:
SELECT "fire"."unitNumber", "configLocation"."location", "configFireEquipmentType"."type", "configFireEquipmentSize"."size", "configFireEquipmentRating"."rating", "fire"."yearManufactured", "fire"."LPT", "configFireServiceLevel"."Level", "configTest"."test", "fireService"."serviceRepairs", "customer"."name", "customer"."customerGUID", "customer"."address1", "customer"."address2", "fireService"."serviceDate", "fireService"."comment"
FROM (((((((("SAFE2"."dbo"."fire" "fire" INNER JOIN "SAFE2"."dbo"."customer" "customer" ON "fire"."customerGUID"="customer"."customerGUID") INNER JOIN "SAFE2"."dbo"."fireService" "fireService" ON "fire"."fireGUID"="fireService"."fireGUID") LEFT OUTER JOIN "SAFE2"."dbo"."configLocation" "configLocation" ON "fire"."locationGUID"="configLocation"."locationGUID") INNER JOIN "SAFE2"."dbo"."fireEquipment" "fireEquipment" ON "fire"."fireEquipmentGUID"="fireEquipment"."fireEquipmentGUID") LEFT OUTER JOIN "SAFE2"."dbo"."configFireEquipmentRating" "configFireEquipmentRating" ON "fireEquipment"."ratingGUID"="configFireEquipmentRating"."fireEquipmentRatingGUID") LEFT OUTER JOIN "SAFE2"."dbo"."configFireEquipmentSize" "configFireEquipmentSize" ON "fireEquipment"."sizeGUID"="configFireEquipmentSize"."fireEquipmentSizeGUID") LEFT OUTER JOIN "SAFE2"."dbo"."configFireEquipmentType" "configFireEquipmentType" ON "fireEquipment"."typeGUID"="configFireEquipmentType"."fireEquipmentTypeGUID") LEFT OUTER JOIN "SAFE2"."dbo"."configFireServiceLevel" "configFireServiceLevel" ON "fireService"."serviceLevelID"="configFireServiceLevel"."levelID") LEFT OUTER JOIN "SAFE2"."dbo"."configTest" "configTest" ON "fireService"."testID"="configTest"."testID"
WHERE "fireService"."serviceDate">={ts '2009-10-03 00:00:00'}
ORDER BY "customer"."name", "customer"."customerGUID"
It looks complext but is not. Most of these joins reference lookup tables.

Unable to install SQL Server Express 2008 R2 - Errors "Failed to retrieve data for this request"

As domain admin I am attempting to install "SQL Server 2008 R2 with SP2" but it keeps failing with "Failed to retrieve data for this request".
The installation never actually starts, it errors before then.
It displays the same error even if I run the System Configuration Checker.
The summary.txt for the install displays the following text:
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -1554760125
Exit facility code:            852
Exit error code:               15939
Exit message:                  Failed to retrieve data for this request.
Start time:                    2014-08-15 16:49:52
End time:                      2014-08-15 16:50:06
Requested action:              RunRules
Machine Properties:
Machine name:                  servername
Machine processor count:       8
OS version:                    Windows Server 2008 R2
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  Yes
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Package properties:
Description:                   SQL Server Database Services 2008 R2
ProductName:                   SQL Server 2008 R2
Type:                          RTM
Version:                       10
SPLevel:                       1
Installation location:         c:\84122ef5b6d9cdcd3b2ac48cec\x64\setup\
Installation edition:          EXPRESS
User Input Settings:
ACTION:                        RunRules
CONFIGURATIONFILE:
ENU:                           True
FARMACCOUNT:                   <empty>
FARMADMINPORT:                 0
FARMPASSWORD:                  *****
FEATURES:
HELP:                          False
INDICATEPROGRESS:              False
INSTANCENAME:                  <empty>
PASSPHRASE:                    *****
QUIET:                         False
QUIETSIMPLE:                   False
RULES:                         GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2008InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck
UIMODE:                        AutoAdvance
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140815_164944\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
    Message:
        Failed to retrieve data for this request.
    Data:
      HelpLink.ProdName = Microsoft SQL Server
      HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
      HelpLink.LinkId = 20476
      DisableWatson = true
    Stack:
        at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
        at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
        at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
        Message:
                The network path was not found.
        Data:
          WatsonData = [email protected]rror
        Stack:
                at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.CreateBaseKey(ServiceContainer ctx, String machineName, IntPtr hKey, String keyName, RegistryAccess access, RegistryView
view)
                at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocalMachine(ServiceContainer ctx, String machineName, RegistryAccess access, RegistryView view)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
                at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
                at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)

    Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
        Message:
                The network path was not found.
        Data:
          WatsonData = [email protected]rror
Above message says that your registry is not consistent and some of the parameters are missing from registry.Or
Account installing SQL server does not have permission to access this. I think case can be here that account with which you logged into your system to install SQL Server might not have certain privileges. Can you take help
of domain admin account add it as a local administrator in this machine always right click on setup file and select run as administrator. Before this make sure you remove all SQL Server components from add remove program
I strongly recommend you to have a good look at below thread
http://support.microsoft.com/kb/2000257/en-us
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Web Analysis Error -- Error while executing query and retrieving data

Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveW

Hi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P

Error Message: The data provider required to connect to the local data file could not be found. The file will be added to the project but the typed DataSet associated with the file will ont be generated.

I am currently taking the course "C# Fundamentals" from Bob Tabors site: LearnVisualStudio.NET . I'm on day 8 where we are integrating SQL Server with C#. In Lesson 6 and 7, (havent' gotten past these two) I am having an
issue. In Lesson 6, "Retrieving Data with ADONET 2 in a Connected Scenario (SQL Server Compact Edition) when I go to create the data file I get the error message I typed into the title. I cannot get the db to appear in the Solution
Explorer, or open up so I can create a table. When I try to skip by that lesson, and complete lesson7, I'm running into the same basic problem, where the error messages are different but I get an exception when I attempt to run the program. Even
though I have been able to create the table for this lesson, the Exception states I have an invalid object name 'Customers' which is the name of the table. I have tried reading several different suggestions for correcting this issue, but have not understood
exactly what I need to do. Since I work from home on my computer, I do not want to do anything with files or downloads unless I understand what I need to do, cause I do not want to lose my job. Any help would be appreciated.
JennyBarrett7

Hi
According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
Change Data Source dialog. If not, you need to install
SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, you can review the following link:
Working with SQL Server Compact in Visual Studio：http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
Thanks
Lydia Zhang

Error while retrieving data from SQL

HI All,
I am getting the below error while tryting to retrieve the data from SQL. Its working fine in developement server. But in production getting the below error.
**Mon Oct 6 05:02:49 2008]esbux106/survey/survey/kpmbatch/Info(1021013)**
**ODBC Layer Error: [S1000] ==> [[DataDirect][ODBC SQL Server Driver][SQL Server]Cannot open database requested in login 'PD_OD**
**S'. Login fails.]**
**[Mon Oct 6 05:02:49 2008]esbux106/survey/survey/kpmbatch/Info(1021014)**
**ODBC Layer Error: Native Error code [4060]**
Iam using essbase 6.5 with Oracle as database. Please Advice.

From the error message..
[DataDirectODBC SQL Server DriverSQL Server
Why is it trying to use a SQL Server Driver to open a Oracle Database? Do you have the ODBC connection on the prod box setup to use the correct driver?

Get "An Error occurred while retrieving data From ProjectWebApp.." when searching content on an External Content Type

I have set-up an ECT in SPD2013 on SP2013. It is a SQL Data source called ProjectWebApp. I have BCS/SSS set-up. I can create an ECT OK in SPD. I can add the ECT to a custom list.
The problem is when I add a new item in the list the following error message appears in red
An error occurred while retrieving data from ProjectWebApp. Administrators, see the server log for more information
I cannot filter or return any results. There is data in the DB.
Another test I do is to try and create a new App/List using the "External List" template. When
I select the ECT a red message appears "External Content Types are not available". which is odd since I can add an ECT to a list as mentioned above.
Any ideas?
Tx
Andrew
Andrew Payze

Hi Andrew,
Please try the option Allow unlimited length in document libraries in the column settings:
http://littletalk.wordpress.com/2011/08/18/external-content-type-an-error-occurred-while-retrieving-data-from-a-system-administrators-see-the-server-log-for-more-information/
If it doesn't help, please refer to the link below and raise the External content type Read List operation thresholds:
http://lightningtools.com/bcs/business-connectivity-services-end-user-implications-part-one-threshold-limit-errors/
Please provide error message in ULS log for further troubleshooting.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Failure to install SQL Server 2012 SP1 CU8/9 with a "Failed to retrieve data for this request." error

Hi all,
Has anyone come across SQL Server 2012 SP1 CU8/9 failing to install with a “Failed to retrieve data for this request.” error.
The error is too generic for a useful search on web, for me at least anyway.
Had no problems patching a whole bunch of other servers in the same environment.
I’m no good at reading these error logs. For some reason the primary replica is referenced in the detailed log???
The CU8/9 patch has been run by both Domain Admins and local Admin with no luck.
We are trying to patch a secondary failover replica. (SharePoint 2013 is installed on this server.)
This is from the summary log:
Overall summary:
Final   result:                    The patch installer has failed to update the shared features. To determine   the reason for failure,
review the log files.
Exit code   (Decimal):             -2146233088
Exit facility   code:            19
Exit error   code:                 5376
Exit   message:                    Failed to retrieve data for this request.
Start   time:                      2014-04-10 11:51:11
End   time:                        2014-04-10 11:51:49
Requested   action:                Patch
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3412.0&EvtType=0xB2652E58%400xDC80C325&EvtType=0xB2652E58%400xDC80C325
Machine Properties:
Machine   name:                    VMSPDB2
Machine processor   count:       4
OS version:                      Future Windows Version
OS service   pack:
OS   region:                       Australia
OS   language:                     English (United States)
OS   architecture:                 x64
Process   architecture:          64 Bit
OS   clustered:                    Yes
Product features discovered:
Product                Instance               Instance ID
Feature                                    Language
Edition                Version         Clustered Configured
SQL Server   2012        MSSQLSERVER            MSSQL11.MSSQLSERVER              Database
Engine Services                   1033                   Enterprise Edition
11.1.3000.0     No           Yes
SQL Server   2012        MSSQLSERVER          MSSQL11.MSSQLSERVER              SQL Server
Replication                     1033                   Enterprise
Edition     11.1.3000.0       No           Yes
SQL Server   2012        MSSQLSERVER            MSSQL11.MSSQLSERVER              Full-Text
and Semantic Extractions for Search   1033                   Enterprise Edition   11.1.3000.0       No
Yes
SQL Server   2012        MSSQLSERVER            MSSQL11.MSSQLSERVER              Data
Quality Services                      1033
Enterprise Edition   11.1.3000.0       No           Yes
SQL Server   2012
Management   Tools -   Basic                   1033
Enterprise Edition   11.1.3000.0       No           Yes
SQL Server   2012
Management Tools - Complete                1033                   Enterprise Edition
11.1.3000.0       No           Yes
SQL Server   2012
Client Tools Connectivity                  1033                   Enterprise Edition
11.1.3000.0     No           Yes
SQL Server   2012
SQL Server Data   Tools                      1033
Enterprise Edition   11.1.3000.0       No           Yes
SQL Server   2012
Integration   Services                       1033
Enterprise Edition   11.1.3000.0       No           Yes
Package properties:
    Description:                     Microsoft SQL Server 2012 Service Pack 1
    ProductName:                     SQL Server 2012
    Type:                            RTM
    Version:                         11
    SPLevel:                         1
KBArticle:                       KB2931078
    KBArticleHyperlink:
http://support.microsoft.com/?kbid=2931078
    PatchType:                       QFE
    AssociatedHotfixBuild:         0
    Platform:                        x64
    PatchLevel:                      11.1.3412.0
    ProductVersion:                  11.1.3000.0
    GDRReservedRange:                10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0
    PackageName:                     SQLServer2012-KB2931078-x64.exe
Installation   location:           e:\90a192411a98d1f6dc\x64\setup\
User Input Settings:
    ACTION:                          Patch
    ALLINSTANCES:                    false
    CLUSTERPASSIVE:                  false
    CONFIGURATIONFILE:
ENU:                             false
    HELP:                            false
IACCEPTSQLSERVERLICENSETERMS:    false
    INDICATEPROGRESS:                false
    INSTANCEID:                      <empty>
    INSTANCENAME:                    <empty>
    QUIET:                           false
    QUIETSIMPLE:                     false
    SQMREPORTING:                    false
    UIMODE:                          Normal
    X86:                             false
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report   file:                 The rule result report file is not available.
Exception summary:
The following is an exception stack listing   the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type:   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
    Message:
        Failed to retrieve data for   this request.
    HResult : 0x80131500
    Data:
      HelpLink.ProdName   = Microsoft SQL Server
        HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
        HelpLink.LinkId = 20476
        HelpLink.EvtType =
0xB2652E58@0xDC80C325
      DisableWatson   = true
    Stack:
        at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
        at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable   dt, Int32 level)
        at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String   machineName)
        at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String   machineName)
        at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1   machineNames, String discoveryDocRootPath, String   clusterDiscoveryDocRootPath)
        at   Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String   actionId)
        at   Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId,   TextWriter errorStream)
        at   Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter   statusStream, ISequencedAction actionToRun, ServiceContainer context)
    Inner exception type:   System.ComponentModel.Win32Exception
        Message:
                Not   all privileges or groups referenced are assigned to the caller.
        HResult : 0x80004005
        Error : 1300
          Stack:
                at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean   enable)
                  at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
                  at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer   ctx, String machineName, SqlRegistryKey
key)
                  at   Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx, String machineName, SqlRegistryKey
machineKey, String registryPath,   RegistryView regView, String regPath, RegistryAccess registryAccess,   Boolean& alreadyCached)
                  at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer   ctx, String machineName, RegistryView regView,
String regPath, RegistryAccess   registryAccess)
                  at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String   machineName, RegistryView regView)
                  at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
                  at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
                  at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
                  at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req,   Object ci)
                  at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
                  at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
And the tail of the detailed log:
(01) 2014-04-10 11:51:29 Slp: Completed Action:   InitializeMsiExtension, returned True
(01) 2014-04-10 11:51:30 Slp:   ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action:   AddPackageModifierSourcesAction
(01) 2014-04-10 11:51:30 Slp: Completed Action:   AddPackageModifierSourcesAction, returned True
(01) 2014-04-10 11:51:30 Slp:   ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action:   InitializeConfigAction
(01) 2014-04-10 11:51:30 Slp: Completed Action:   InitializeConfigAction, returned True
(01) 2014-04-10 11:51:30 Slp:   ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action:   RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:31 Slp: Running discovery on local   machine
(01) 2014-04-10 11:51:33 Slp: Discovery on local machine   is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote   machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp:   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to   retrieve data for this request. ---> System.ComponentModel.Win32Exception:   Not all privileges or groups referenced are
assigned to the caller.
at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean   enable)
   at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
   at   Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer   ctx, String machineName, SqlRegistryKey key)
   at   Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx, String machineName, SqlRegistryKey machineKey, String registryPath,   RegistryView regView, String regPath, RegistryAccess
registryAccess,   Boolean& alreadyCached)
   at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer   ctx, String machineName, RegistryView regView, String regPath, RegistryAccess   registryAccess)
   at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String   machineName, RegistryView regView)
   at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
   at   Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
   at   Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
   at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request   req, Object ci)
   at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
   at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
   --- End of inner exception stack trace ---
   at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
   at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable   dt, Int32 level)
   at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String   machineName)
   at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String   machineName)
   at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1   machineNames, String discoveryDocRootPath, String   clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:36 Slp: Error: Action   "Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction"   threw an exception during execution.
(01) 2014-04-10 11:51:36 Slp:   Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Failed   to retrieve data for this request. --->   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to
retrieve data for this request. ---> System.ComponentModel.Win32Exception:   Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean   enable)
(01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
(01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer   ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx, String machineName, SqlRegistryKey machineKey, String registryPath,   RegistryView
regView, String regPath, RegistryAccess registryAccess,   Boolean& alreadyCached)
(01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer   ctx, String machineName, RegistryView regView, String regPath, RegistryAccess   registryAccess)
(01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String   machineName, RegistryView regView)
(01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
(01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req,   Object ci)
(01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp:    --- End of   inner exception stack trace ---
(01) 2014-04-10 11:51:39 Slp: Received request to add the   following file to Watson reporting:   C:\Users\HS2\AppData\Local\Temp\tmp6614.tmp
(01)   2014-04-10 11:51:39 Slp: The following is an exception stack listing the   exceptions in outermost to innermost order
(01)   2014-04-10 11:51:39 Slp: Inner exceptions are being indented
(01)   2014-04-10 11:51:39 Slp:
(01)   2014-04-10 11:51:39 Slp: Exception type:   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
(01)   2014-04-10 11:51:39 Slp:     Message:
(01)   2014-04-10 11:51:39 Slp:           Failed to retrieve data for this request.
(01)   2014-04-10 11:51:39 Slp:     HResult : 0x80131500
(01) 2014-04-10 11:51:39 Slp:       Data:
(01) 2014-04-10 11:51:39   Slp:       HelpLink.ProdName = Microsoft SQL   Server
(01) 2014-04-10 11:51:39   Slp:       HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
(01) 2014-04-10 11:51:39   Slp:       HelpLink.LinkId = 20476
(01) 2014-04-10 11:51:39 Slp:       Stack:
(01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
(01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable   dt, Int32 level)
(01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String   machineName)
(01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String   machineName)
(01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1   machineNames, String discoveryDocRootPath,
String   clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String   actionId)
(01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId,   TextWriter errorStream)
(01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter   statusStream, ISequencedAction actionToRun, ServiceContainer
context)
(01)   2014-04-10 11:51:39 Slp:     Inner exception type:   System.ComponentModel.Win32Exception
(01)   2014-04-10 11:51:39 Slp:           Message:
(01)   2014-04-10 11:51:39   Slp:                   Not all privileges or groups referenced are assigned to the caller.
(01)   2014-04-10 11:51:39   Slp:
(01)   2014-04-10 11:51:39 Slp:           HResult : 0x80004005
(01)   2014-04-10 11:51:39 Slp:           Error : 1300
(01) 2014-04-10 11:51:39   Slp:         Stack:
(01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean
enable)
(01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
(01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer
ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx,
String machineName, SqlRegistryKey machineKey, String registryPath,   RegistryView regView, String regPath, RegistryAccess registryAccess,   Boolean& alreadyCached)
(01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer
ctx, String machineName, RegistryView regView, String regPath, RegistryAccess   registryAccess)
(01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String
machineName, RegistryView regView)
(01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
(01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req,   Object ci)
(01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
(01) 2014-04-10 11:51:39 Slp:                   at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
(01) 2014-04-10 11:51:44 Slp: Watson Bucket 2
Original Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 :   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process
(01) 2014-04-10 11:51:44 Slp: Parameter 2 :   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege
(01) 2014-04-10 11:51:44 Slp: Parameter 3 :
Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException@-2146233088
(01) 2014-04-10 11:51:44 Slp: Parameter 4 :
System.ComponentModel.Win32Exception@-2147467259
(01) 2014-04-10 11:51:44 Slp: Parameter 5 :   RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 1300
(01) 2014-04-10 11:51:44 Slp:
Final Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 : 0x6785B09D
(01) 2014-04-10 11:51:44 Slp: Parameter 2 : 0xB2652E58
(01) 2014-04-10 11:51:44 Slp: Parameter 3 : 0x74E34741
(01) 2014-04-10 11:51:44 Slp: Parameter 4 : 0xDC80C325
(01) 2014-04-10 11:51:44 Slp: Parameter 5 :   RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 0xA05EFA62
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Microsoft SQL
Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Uninstall to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL   Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft
SQL Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Uninstall to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL   Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:46 Slp: Failed to retrieve data for   this request.
(01) 2014-04-10 11:51:46 Slp: Watson bucket for exception   based failure has been created
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to create   base registry key HKEY_LOCAL_MACHINE, machine
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to open   registry subkey Software\Microsoft\Microsoft SQL Server\110
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to get   registry value EnableErrorReporting
(01) 2014-04-10 11:51:46 Slp: WER: Successfully read app   consent from registry Software\Microsoft\Microsoft SQL   Server\110\EnableErrorReporting=0.
(01) 2014-04-10 11:51:46 Slp: WER: Application level   consent value '0' was mapped to consent status 'WerConsentDenied'
(01) 2014-04-10 11:51:46 Slp: WER: Result of the   submission:: 'WerDisabled'
(01) 2014-04-10 11:51:46 Slp: WER: Submitted 1 of 1   failures to the Watson data repository
(01) 2014-04-10 11:51:46 Slp: Sco: File   'C:\Windows\system32\Cluster.exe' does not exist
(01) 2014-04-10 11:51:46 Slp: Failed to collect cluster   logs, cannot find Cluster.exe under system directory.
(01) 2014-04-10 11:51:46 Slp: Dumping final cluster state.
(01) 2014-04-10 11:51:49 Slp: Completed dumping final   cluster state.
(01) 2014-04-10 11:51:51 Slp:
(01) 2014-04-10 11:51:51 Slp:   ----------------------------------------------------------------------
(01) 2014-04-10 11:51:51 Slp:
(01)   2014-04-10 11:51:51 Slp: Error result: -2146233088
(01)   2014-04-10 11:51:51 Slp: Result facility code: 19
(01)   2014-04-10 11:51:51 Slp: Result error code: 5376
(01)   2014-04-10 11:51:51 Slp: SQM Service: Sqm does not have active session.

Hello SQL Ranger,
Thanks for posting the detailed log. I dont have exact solution for this but I can give you some hint what could be reason patch has failed below message points to fact that there is some issue with account which is used to install CU patch.Have alook at
below log.It says that when patch was trying to get details from other node in cluster it was not able to.
01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
IMO I strongly feel it is issue with the account. Microsoft has also documented about this for SQL Server 2008 .Have a look at following links
http://support.microsoft.com/default.aspx?scid=kb;en-US;2000257
Please also assign privilege mentioned in below link
http://www.bradg.co.za/?p=12
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Error in syncrhronous message retrieving data of AS400

Similar Messages

Maybe you are looking for