Error in Task List while creating routing

Dear Guru's
When I create routing ,i am using  MIC in the routing.While saving the routing I get a messaae <b>Task List Contain Error , do you want to save</b> .
Can any one will guide how to remove this error ?
Thanks
Regards,
Chetan

Dear Chetan Chaskar,
Some of the reasons for this are
1.Check whether you have maintained formual keys,Cost centre,proper activity
types( for that cost centre )for your work centres which have mentioned in routing
details & assign control keys .
2.check whether you tried to change the time unit for the activity type ,when
alloting for an operation.
3.Always before saving routing just,test it by pressing check button Control+Shift
+F1,the system gives you Information,Error,Warning & termination messages.
4.Check the log and act accordingly.
Regards
Mangal

Similar Messages

  • How to customize Category and Category items list while creating New Model

    Hi,
    what the most convenient way to customize the Category and Category items list while creating New Model?
    This is standard:
    Now, what we want to achieve, is to customize this menu, to:
    1. Display in the Category window only f.e. two categories:
    - EA Diagrams
    - BPM Diagrams
    2. In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available. Additionally, it should behave like a hierarchy ... meaning you can create the second diagram, only as child (related diagram) of the first diagram etc.
    I know, excluding the particular diagrams/diagram elements can be configured using the right/profile settings, but how to:
    1. Customize the standard New Model menu window
    2. Create copies of City Planning Diagrams with different set-ups
    3. Set the relationship between diagrams
    Is such a configuration change possible?
    Thanks a lot for your help!
    Regards,
    Rafal

    Now, what we want to achieve, is to customize this menu, to:
    Question #1. Display in the Category window only f.e. two categories:
    - EA Diagrams
    - BPM Diagrams
    Click on Tools => General Options=> Model Creation
    Click on Properties => at right of Default category set
    Note : Model template does not work as Category. We can't set. An enchancement request has been open to SAP
    In the following example I defined a new default (MyNewDefault.mcc). As you can see only BPMN models are available.
    To create a new category set with BPMN choice
    a) Copy default.mcc in MyNewDefault.mcc file.
        Go to Tools=>General Options=>Model Creation : Select your new category
        Go to Tools=>General Options=>Model Creation : Edit properties and remove all things you does not want keep
    or
    b) Go to Tools=>General options=>Model Creation : Edit properties and click on Save as button and specify the file name "MyNewDefault".
        Quit the window.
        Select you new category : Go to Tools=>General Options=>Model Creation : "MyNewDefault"
        Edit properties and remove all things you does not want keep.
        Save you new category
    Question #2. How to define copies/replicas of existing diagrams
         Wrote an extension
    Question #3. How to make sure, particular diagrams can be used (created) only on predefined "levels" and how to set the parent-child relationship, so that PD enforced it directly when creating a new diagram.
         Specify yours conditons in your extension attached to your model
         Example : When the user want create a child diagram :  You can display a list of Parent Diagrams to select from.
         You can set in your extension by VBScript parent-child relationship
    Question #4 In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available.
    If I understand well your question. I suggest to take a look in
    Repository=>Administration=>Objects Permission Profile
    You can specify objects to show, mask, deactivate at model level.
    You can specifiy your own metadata.
    But I'm not sure you can mask, deactivate functions following diagram selection. It seem to specific.
    Message was edited by: Benoit Le Nabec

  • Error in message monitoring while creating new record in R/3

    Hi All,
    I am getting the following error in message monitoring while creating a new record from SAP Mobile client.
    Service name: Validation_Service
    Message: BackendKeys are not filled in table HEADER returned by getDetails
    I am passing some random number from Client to SAP R/3 create function module.
    When i pass the same value in create FM as in message monitoring. I am able to create the record successfully,
    Corresponding to newly created record, i can see the data in getdetail header also.
    Not sure why this error is coming.
    Appreciate your help!!
    Thanks & Regards
    Devendra

    The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
    i.e. the CREATE signature is usually something like:
    CREATE_BLAH
      IMPORTING header TYPE header_row
      EXPORTING key type header_row-key_field.
    So the 'key' here should be filled by the FM and returned to DOE.

  • How to restrict the the oreder reason list while creating sales order

    Hi gurus,
    Can anyone suggest me
    how to restrict the Order rerson list
    while creating the sales order in VA01
    Thanks & Regards
    kalyan.

    hi,
    Try this exit:
    Enhancement            MMFAB001     User exit for generation of release order                    
    Thanks,
    AMS

  • Layout Par file name not appearing in list while creating new Layout

    Hi
    I downloaded com.sap.portal.layouts to modify the light_framework page to suit my needs, renamed it to com.mycomp.portal.layouts, modified the page, created a par file and uploaded it thru NWDS.
    When I go to the portal to create a new Layout, I do not see my custom par file in the list.
    I have even uploaded it from the portal: System Administration -> Support -> Support Desk -> Portal Runtime -> Administration Console -> Archive Uploader. Even after it was successful, I was not able to see the par file listed while creating a new Layout.
    How do I get my Layout par file listed do i can create my Layout?
    Thanks
    J

    Hi Bala
    I never had a problem with the JAR files in this par file while opening, nor did I have to manually add anything.
    I know it has been successfully uploaded in the portal, as I can see my par file in the Archive Deployment Checker.
    What could be wrong? Is there something else I have to put in the portalapp.xml to make it visible in the list?
    Thanks
    J

  • Blank Technologies list while creating master repository

    I am getting no technologies in the technologies list while creating the master repository in ODI. Unless I select something, master repository creation wizard is not allowing me to create a master repository. Can anyone help me where I need to mention the list.

    You need to have filled in the details in the connection boxes before a technology selection can be made.
    Craig

  • Error while creating Routing using LSMW

    Hi Guys ,
    I am trying to create LSMW using Direct Input Method .
    My structures are ::
    RC271_DS   Work center structure for direct input (for datasets)
    RC27M_DS   Material master view DIRECT INPUT routing for datasets
    PLKO_DI_DS Header structure for direct input (for datasets)
    PLPO_DI_DS Routing/item structure for direct input (for datasets.
    I getting correct data from multiple flat files .
    It's converting the data also .
    But while executing start direct input method i am getting the followig error ....
    You cannot edit the task list object with activity type
    Please let me know problem guys .
    Regards,
    Raj

    Hi Naveen,
    It means you have to assign  the task list type to  material type ZPRD. Then it will carry its job:
    The path is:
    Go To-> SPRO-> IMG Activity-> Production-> Basic Data-> Routing-> General Data---> Define Material Type Assignments. T-Code: OP50
    I hope it will work.
    Regards,
    Madhu.G

  • Error while creating routing in CA01

    Hi,
    I'm trying to create a routing for a material using CA01 in dev environment. I have given the input of a material number and plant that exists in the system, but when i execute it throws an error saying "Material type ZPRD is not defined for task list type N"
    Message no. CT761
    it suggests with procedure :
    To create a task list with task list type N for a material with material type ZPRD, you must maintain the material type allocation under General data in Customizing for routings.
    I didn't understand this procedure. Can anyone please help me how to proceed to find the solution.
    Appreciated if you can answer.

    Hi Naveen,
    It means you have to assign  the task list type to  material type ZPRD. Then it will carry its job:
    The path is:
    Go To-> SPRO-> IMG Activity-> Production-> Basic Data-> Routing-> General Data---> Define Material Type Assignments. T-Code: OP50
    I hope it will work.
    Regards,
    Madhu.G

  • Missing Parts List While creating Prd. Order

    Hi Friends,
    My client is creating production Orders Manually thru CO01and While Creating & Saving The Production Order System Is Not Supporting In Giving  Missing Parts list In spite Of Deficit of Un Restricted stock inStorage Location For BOM components used in that Order.
    To my surprise when the defisit is for all the BOM components only one component is showing as missing part in missing parts list.
    But While confirming the order The system is showing missing parts for all the components which are defisit for order confirmation.
    I Tried To Get This From the Following Method
    Checked For Define checking control In OPJK.
    Selected plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
    a) Removed tick mark in No Availability check.
    b) Type of component check Given as - ATP check.
    c) Material release - 1. User decides on release if parts are missing.
    d) PP Checking rule (Which Is same As with plant parameter OPPQ)
    e) In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
    Then Assigned the availability checking group at Mrp View of Header material.
    In spite Of All These Settings Still At The Time Of Order Release/Save A Warning Massage Or A Informative Massage Is Not Appearing
    *Please Suggestu2026u2026u2026u2026*
    hari

    Hi,
    Please check same checking rule use in Material master and with order type and plant?
    Check the cheking group in material master MRP3 view for all material.
    Go to Transection OPJJ - Maintain scope of check,
    Select your Checking rule which you have assing to your order type and tick INLCUDE RESERVATION.
    (1). CO24- Missing Parts Information System
    Under this transaction you choose Selection from Reservations and then select Plant & Material then you can get Missing Parts List for your respective material without production / planned order also.
    (2). COOIS : Production Order Information System
    Under this transaction you need to Select in List option as Components and then go on Selection Tab.
    For collective availability check use
    COHV - Excute the roport w ith collective avaliabilty check.
    COMAC.
    Hope this help.
    Regards,
    R.Brahmankar

  • Error related to depreciation while creating PR - BAPI_REQUISITION_CREATE

    Hi Experts,
    We are using the  BAPI_REQUISITION_CREATE to create the PR  (Purchase requisition).
    While creating the PR we were got stucked by the following errors.
    - Parallel depreciation area 33 is not posted
    -You cannot post to this asset (No depreciation areas present)
    Please guide us if someone had faced similar error/suituation.
    Early reply will be really appreciated.
    Thanks,
    Ravi.K

    Hi Ravi,
    Generally : the system checks whether depr.areas exist for this dummy asset and if not,  the error AA 304 is prompted.               
    Further checks are made when using (N) transactions, that's why you  get AA 025 when posting with ME51N.         
    Best regards Bernhard

  • Error in account determination while creating shipment cost document in SD

    Dear all,
    I have come across a case where an error has come in determining account while creating shipment cost document. This is happening only in the case of a particular shipment cost type. The Status of " Calculated" is C, the status of " Assigned" is " B" and the status of "Transferred" is A.
    Can any one throw any light as to why it is happening like this?
    Thanks and best regards
    Kumaran

    Dear all,
    With the help provided, I am unable to resolve the issue.
    Any further inputs please?
    Thanks & best regards
    Kumaran

  • "Error in source system" while creating source system

    Hello,
    I don't know what's our general problem (I suppose that it's ageneral problem) but we always have the following eror while creating a source system:
    When we want to create a source system on BI, we first get an error "No connection to source system possible". After checking the RFC connection and correct the password of the remote user on the automatically created _DIALOG RFC connection the exception changes to "Error in source system".
    The error occurs after the information "Please log on as an administrator in the following screen".
    The remote user on R/3 side has got profiles S_BI-WHM_RFC and S_BI-WX_RFC (found two conflicting statements regarding this profiles), on BI side it has got SAP_ALL and some more profiles
    What else could be the problem?
    Greetings & Thanks
    Bettina

    Hello,
    now we know that
    1. the remote user needs profiles SAP_ALL and SAP_NEW and has to be dialog user with a password unequal that password it should have in the future (otherwise you don't see the error messages that appear during the login process)
    2. the system has to be changeable (scc4 and se03)
    After the source system is created the changeability can be changed to the original values and the remote user can be changed to a communication user again.
    Thanks for the tip regarding the authorizations.
    Greetings
    Bettina

  • Restricting values on the drop down list, while creating a PO

    Hello SAP Experts,
       Could you help me with the following.
      While creating a PO (ME21N), based on the Account Assignment Category(KNTTP) entered , I have to restrict the values in the drop down list for selecting the material group (MAKTL). I have searched some in SDN, but couldn't find anything suitable. Appreciate any help.
    Thank you,
    Sorab

    Could anyone tell me , if it is possible. Has anyone tried this before.
    Thank you,
    Sorab

  • Giving error of insufficient privileges while creating triggers

    Hi all,
    I am facing the problem of insuffcient privilege on base tables while creating triggers. I have three schemas say A, B, C in my database.
    Base tables are in schema A. I have given all the grants on base table to schema B and C.
    grant all on base_table_name to B;
    grant all on base_table_name to C;
    I have created synonym also on that base table.
    And i m creating triggers in schema B.
    When i execute the query for trigger the it giving following error :
    +AFTER INSERT OR UPDATE OR DELETE ON BASE_TBALE_NAME                                      *+
    ERROR at line 3:
    ORA-01031: insufficient privileges
    even i have checked in dba_tab_privs for that base_table.....it is showing all the grants to USER B and C.
    What should I do now?
    please suggest.......
    Regards,
    Andy.

    Hi karan,
    You are right. While searching docs i got the solution of my problem.
    Privileges Required to Use Triggers
    To create a trigger in your schema:
    +•You must have the CREATE TRIGGER system privilege+
    +•One of the following must be true:+
    +◦You own the table specified in the triggering statement+
    +◦You have the ALTER privilege for the table specified in the triggering statement+
    +◦You have the ALTER ANY TABLE system privilege+
    To create a trigger in another schema, or to reference a table in another schema from a trigger in your schema:
    +•You must have the CREATE ANY TRIGGER system privilege.+
    +•You must have the EXECUTE privilege on the referenced subprograms or packages.+
    To create a trigger on the database, you must have the ADMINISTER DATABASE TRIGGER privilege. If this privilege is later revoked, you can drop the trigger but not alter it.
    The object privileges to the schema objects referenced in the trigger body must be granted to the trigger owner explicitly (not through a role). The statements in the trigger body operate under the privilege domain of the trigger owner, not the privilege domain of the user issuing the triggering statement (this is similar to the privilege model for stored subprograms).
    I have to grant only create any trigger to user.
    Problem solved.
    Thanks to all for ur help.
    Regards,
    Andy.

  • Unable to see web service listed  while  creating the form on webservice

    Hi All,
    i created a web service reference and tested it and i m even getting the response of it .
    but i m unable to see the webservice being listed ...while creating a form on webservice .
    whereas if i create a process on webservice .. i can find webservices in the webservice list .(.the webservice which i created in the shared component)
    can anyone help me ...
    Thanks & Regards,
    Nandini Thakur.

    that should be an easy one. you might not have the GP roles needed. give to your user the caf roles in the UME

Maybe you are looking for