Error in tax code for UK IT0065

Hi every body, I have an error with IT0065. When I try to create a new IT0065 with the new emergency value has of 6th April 2011: 747L, I have the following error message: "enter valid tax code"
I have correctly implemented notes 1564954 (change the value in T511K)
Does I need to do something else ?
Thanks a lot,
KR
Greg

Yes this exactly what I have into my T511K table.
Constant       Text                                    BEGDA         ENDDA         Value
TXCOD     Emergency tax code     2008.09.07     2009.04.05     603.00
TXCOD     Emergency tax code     2009.04.06     2011.04.05     647.00
TXCOD     Emergency tax code     2011.04.06     9999.12.31     747.00
Edited by: GREGORY DAHAN on May 3, 2011 2:17 PM
Edited by: GREGORY DAHAN on May 3, 2011 2:18 PM

Similar Messages

Error 'No tax code found for difference' in Posting Vendor Invoice IDOC

Hi All,
I am getting error message 'No tax code found for difference' while posting Vendor Invoice IDOC into SAP. IDOC type is INVOIC02. There is no difference in PO price, Invoice price and even Standard price. then why this error message? Other Vendor EDI settings are done ( OBCA, OBCD, OBCE etc). Is there any thing specific to be done in the config for this error?
IDOC has PO as reference document.
I looked into several threads in SDN forum but could not find proper solution
Can any ine help me with this issue?
Thanks in advance
Hari

Hi
You might be missing the tax code for uploding through IDOC
so you can use the t.code we02 and give the doc and find the error
go to the WE19 to edit the tax code
and USE the t.code BD87 to select the doc and process it
thanks
Madhu

Syntax error while creating tax codes for sales n purchases

Hi all,
While creating the tax codes for sales and purchases, i got the below error:
Report RB13A003 has a syntax error.
What should be done?
Thank you

Hi,
I believe, it's RV13A003 report and not RB13A003... What is the exact error message (or is it a dump)?
Regards,
Eli

Error in Tax code while creating a PO in T.code ME21n

Hi,
I am trying to create purchase Order, I am getting an error when while entering this
Tax Code : v1
Jurisdict. Code: RS14902
The error is "Tax code v1 in procedure TAXBRJ is Invalid"
How to rectify this error. Or
What can be other way of entering the tax code and jurisdict code

Hi,
Go to the Table T007A, where you find the tax codes.
Input & out put taxes are the tax types.
In FTXP T.code give the tax code and click on the
Input tax codes are used for purchase cycle and out put taxes are for sales cycle. I Hope you have given the sales related tax code. Thats why system is giving the error message.
In T007 Table give the proper input and get the details.
Regards,

Error in Tax Code after Creation of Excise Invoice

Dear All,
We are using TAXINN Procedure,I have maintained condition records and given the correct tax codes in them for Basic Excise Duty,Secondary Cess and Higher Secondary Cess on the table 357,however after checking the accounting document which is created post creation of excise invoice the wrong tax codes are getting picked up however when i create my commercial invoice and check the tax codes the correct tax codes are coming,please advice what needs to be done to rectify this error.
Best Regards
Atul Keshav

Hi
If you are using TAXINN procedure, check apart from VK11 check you have maintained TAX CODE for excise condition types. Example FTXP or VK19 (using application as TX). Also check whether you are using UTXJ condition type. If you are using UTXJ condition type then please remove it.
For TAXINN you need not have UTXJ condition type.
Regards
MBS

Error FF753 Tax code 01 not appear in any G/L account item with FM Active

Hi
We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are getting the Error FF753 Tax code 01 not appear in any G/L account item.
This error however does not appear when posting directly from FI with the same tax code.
I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
Please advise.
Regards
Sandeep

Hi:
          If you could please refer to the contents of OSS Note 112609 - How are tax codes transferred to conditions ?
"Symptom
If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
Other terms
FF805, FF747, FF753, MWSKZ, MWSK1, tax code
Reason and Prerequisites
The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
Solution
In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
Basically:
The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
    1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
    2. The tax code is transferred into all conditions, for which
    the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
    the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
    the condition is not statistical (if it is no invoice list condition),
    the condition is no tax condition.
After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
Special features:
    1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
    the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
    the condition is not statistical (if it is no invoice list condition).
    the condition is not a tax condition.
    2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
Notes:
    1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
    2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
    3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
    4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
Regards

Tax Code for NR00 Free Goods

Hello,
I have configured discount-in-kind free goods using the standard NR00 condition type. With the necessary configuration and condition records in place I am attempting to test my setup by creating a purchase order.
The discount-in-kind calculation is working correctly, creating item 11 containing the free goods quantity (set up as exclusive).
However, I am receiving the error: In case of ERS, please enter Tax Code. Due to our business process the user is not able to enter this manually, it must be automatically populated.
We have a tax condition type on in our main calculation schema which is correctly determining the tax code for the item 10. However, this is not getting copied down when item 11 is created, and since it is a free good, there is no condition tab which is used to determine the tax code.
Am I missing something or is there additional set up to populate the tax code for the free good? Our taxes are somewhat complex as we operate cross boarder (one material may be not taxable in one country, and taxed at different rates in another one).
Thanks in advance,
Matt

Hi,
ERS indicator is based on Vendor Master if you are creating PO for that vendor for all items it will ask for Tax code
Since tax code is mandatory to for ERS to run in backgeorund
Now if you are using one line item as free goods you need to create some dummay tax code with ZERO tax
Hope its clear
Thanks
Diwakar

Definig tax codes for sales and procedure

Hi,
I am getting an error in definig tax codes for sales and procedures.It's asking for Tax Jurisdiction.But can't accept whatever I enter.Please advice.

Check availability at SPRO-Financial Accounting (New)-Tax on Sales/Purchases-Basic Settings-Specify Structure for Tax Jurisdiction Code OR Define Tax Jurisdictions
Srinivas

How to find open SO Items with tax code for a particular day?

Dear all
If i want to see all open SOs(items), with tax code for a particular day, how to find using table VBAP in SE16?
Please guide me
Edited by: Julius Bussche on Mar 3, 2009 11:10 PM
Please use descriptive subject titles and the search

Hi GB,
Its always better to see through the standard reports , as you will be able to see the aditional info as well.
In the case of table in se16 you will be able to see one table at a time and then you need to manually figure out the fields that required.
For example if you want to see the sales order details through tables then
1.You have to go to VBAK to see the document type and then you need to go to VBAP to see the items , it means that you need to access 2 tables for this simple thing ....
In standard reports there will be lot of joins between the tables and you can view the data more elobarately as weel.
Note : In general if you want to see the complete details of the documents(open), then pls use the reports.
Regards,
Vvieks

How to configure Two Tax Codes for single line item in work order

Hi All,
Please do Review the below scenario and tell me how to solve it.
A) Certified Work Done Gross Bill Amt      100,000
Total Work Done Value      100,000
Less : Labour & Like Charges @ 30 % on Rs 100,000 = 30,000
Vat applicable Amount =      70,000
Add VAT @12.5% Chargeable on Taxable Turnover of Rs. 70,000.00     = 8750
Total Bill Value = 108750
Service Tax @ 12.36% on 33% Value of Rs. 100000     = 4079
G.Bill Amt = 112829
Total Amt Due for Payment = 112829

HI, There is a possible solution for this scenario.
1. Create 2 tax codes for VAT and SERVICE Tax at 12.5% and 12.36% respectively
2. While posting the Invoice (TRX - FB60) following steps need to be followed.
3. Amount has to be split into two line items
4. Ist Line Item should have the Vat amount + 70000/- and select relevant tax code that was
    created for 12.5%
5. Similarly 2nd Line Item should have Service Tax amount + 30000/- and select relevant tax code that
    was created for 12.36%.
Hope this would meet your requirement. If the solution is okay, kindly indicate the points.
Regards
K.Sanjai Babu

P.O. with different Tax codes for each line item.

Hi
I would like to know how the IV has been done for the P.O. with differnt tax codes for each line item. Since in MIRO at header level we can select only one tax code.

Hi
Raju,
It means we can post only one invoice at time i.e.for line item same taxcode is there.
e.g. If line item 10 has tax code A1, 20 has A2 then on header i can only select either A1 or A2 tax code & post invoice of that line item.

While Printing Stock Transfer PO giving error message " Tax code in procedu

Dear SAP MM Cons,
I want see the print preview of stock transfer purchase order but i getting following error.
Tax code in procedure TAXINN is invalid
Where we need not require to give any tax code in the stock transfer PO. Can any body help me to see the printpreview of STO.
Reagrds
Abhishek Tiwari

Kedarji
Thank you.Urgent please.
Regards
venkat
Edited by: garapati on Feb 15, 2008 12:06 PM

Error in tax code creation

hi everyone,
i have defined new tax codes by using OB40 and FTXP. when i create a standart PO, these codes appear at "invoice" section of ME21N. but when i enter incoming invoice from MIRO these codes don't appear. what can cause this problem. if you can help me i would be grateful.
thanks a lot.
Melih

the tax code for the PO line items should eb defaulted in MIRO. Check the layout you are using in MIRO.
If you choose the layout 'All information', tax code is the 9th column from the left.
Praveen.

Tax Code Determination - default tax code for sales

Under the tax code determination window i have set the default tax code for sales as VAT@4% and I have save it. but when I open the sales quotation , order or any other sales document the tax code is not appeared. what could be the reason?
thanks
SV Reddy

Is ur "Determination Type" is 'Material Type'?
FYI from Help file,
When you enter item information in the marketing documents, system will check the item master data. If the item classification for the tax is:
Material Item
The tax code determination for material will start.
Service Item
The tax code determination for service will start.
When you enter service information in the marketing documents, the tax code determination for service documents will start
Regards,
Dhana

Creation of Service Tax code for Service Tax Payable

Hi
Please advise me to create service tax code for service tax payable
Thanks and Best Regards
Shekhar
Edited by: Shekhar Yecham on Sep 16, 2008 8:28 PM

Hi Randeep,
As they said it is service tax GTA.Right we are doing out of SAP, we want it to be done in SAP
The tax calculation will be like below
service tax of 10.3% has to caluclate on the 25% of the Base amount. Like
25% is taxable and 75% is livied.
Base Amount - 100.00
25% of the base amount(100/25) = 25.00
service tax(10.30%) to be calculate on Rs. 25.00
25*10.30% = 2.57
Base amount --> 100.00
Service Tax --> 2.57
Total: 102.57
Regards,
Siva.

Error in tax code for UK IT0065

Similar Messages

Maybe you are looking for