Error in the Advisor

I just found an error on the advisor reports.
If I have a form page based on "TABLE1" and on that page I also have a tabular form based on "TABLE2" then the advisor thinks all my columns in the tabular form have an error in the category "Fetch, DML, MR* Processes are Valid (x)"
this is what it returns:
Compilation error - ORA-00904: "COLUMN1": invalid identifier Statement: SELECT "COLUMN1" FROM "SCHEMA"."TABLE1"
The error from the advisors side is that it thinks the column should be in TABLE1, when it should actually be in TABLE2

Hi there ,
Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I seen your post here on the HP Support Forums and I would be happy to help you. I see that you are having an issue with the power options. More specifically what closing the lid does. In System Settings you should see at the top where it says Change Settings that are currently unavailable. Please click that. Then you will see where it says Shutdown Settings. Make sure that Sleep - Show in power menu is checked. Save changes at the bottom of the window. Restart your Notebook and see if you have the Sleep Option under When I close the lid. Have you tried to use the Power troubleshooter? Here is a link to a document called Managing Power Options (Windows 8). At the very bottom you will notice the last step is Using the Power troubleshooter to fix problems in Windows 8. Try this step, restart your Notebook and see if the sleep option reappears. If these steps do not help, you can try to Update the BIOS. Please follow these provided troubleshooting steps, re-post and let me know if anything worked, and if it did not, details on what you see. Have a great day!

Similar Messages

There was an error in the App Store. Please try again later. (null)

I seem unable to purchase from the Mac App Store. Free downloads work fine, but purchases do not. iTunes purchases are fine, as are iOS purchases.
Firstly I get "Your Purchase Could Not Be Completed - For assistance, contact iTunes Support at www.apple.com/support/itunes/ww/."
Then I get "We could not complete your request. - There was an error in the App Store. Please try again later. (null)"
Anyone else got the same problem or a solution?
I'm using Mavericks on a 2013 MBA.
TIA,
SPD.

Ok. I got in touch with an Apple Support Correspondent via Email (he was rediculuously helpful) and he said:
I checked your account and I can confirm that it was related to other accounts which was disabled. Considering the case, you'll need to contact our Account Security team for account verification.
Apple takes the security of your account very seriously. To make sure only you can access your account, you'll need to speak with one of our specially trained Account Security Advisors and request for verification and re-enabling of your account.
He said to go to this page:
Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Choose your country, then pick the "Apple ID Account Security Option". There will be options on when to call Apple Support. The advisor also said that calling Support was the only option.

When I attempt to upgrade an app in iTunes for windows, I get an error: "Could not purchase. An unknown error occurred (11111). There was an error in the iTunes Store. Please try again later"

When I attempt to upgrade an app in iTunes for windows, I get an error: "Could not purchase. An unknown error occurred (11111). There was an error in the iTunes Store. Please try again later"
I am running the latest iTunes 10.7.0.21 for Windows 7.
This error occurs if I try to either update the app or if I delete it and attempt to redownload.
I have an iPhone and an iPad. I am unable to update the apps or install the apps from within the App Store on iOS.
I do not have an AOL ID, as is a common issue with this type of error.
From what I can tell, my Apple ID account seems fine. I logged in, changed some information, and ensured my credit card is valid and updated.
I can download new apps just fine. I am unable to update or install apps I have purchased in the past.

After 30 minutes this morning, no resolution. Then another tech support call this afternoon, 15 minutes in, was escalated to a Tier 2 (Senior) advisor. He said something similar to the above ("this is one of the strangest things I've seen"). He was chatted with iTunes guys and took all my info into the case and was escalating it over to engineering. Said they would be in touch.
So, no solution...yet.
Just to clarify:
iTunes on Windows7: trying to update an existing app, or re-download a prior app, gives the (11111) error. Downloading a new (free) app worked fine.
App Store on iPhone5, iOS 6.0.1: click on UPDATE, switches to INSTALLING...for a second, then switches back to UPDATE. No error message (and nothing in Diagnostic data).
App Store on iPad 3, iOS 6.0.1: same as iPhone 5.
Definitely account related.
I have cleared the store cache, signed out and back in, deleted the credit card data, and re-added, rebooting PC and iPhone...nothing works.
Will post if I hear anything back from Apple.

How to get access to all the advisories in mozilla?

Mozilla Foundation Security Advisories (http://www.mozilla.org/security/announce/),
when accessed provides information on many of the advisories, but for some it displays an error that you are not authorized to open.
I tried to open bug #790879 & it showed following error:-
(https://bugzilla.mozilla.org/show_bug.cgi?id=790879).
Can anybody please tell me what needs to be done to get complete access of the advisories.

i myself am no mozilla staff but just a contributing volunteer, so i cannot tell you for sure how it works in practise (the policy document is now nearly a decade old). however according to the document most bugs should get disclosed after a unspecified amount of time after they got fixed and then they are just readable like any other normal bug report at bugzilla.mozilla.org.
in case you have a legitimate interest in reviewing a certain inaccessible bug-report (& have an account on bugzilla.mozilla.org) you could also try to write an email to the security@XXX mail address & explain the situation - maybe they can/will add you to the list of people who are authorized to view the details.

The current user username has not been granted the ADVISOR privilege despite having it !

Hi,
I'm trying to follow ML note 2499931.1 'Using Dbms_Advisor.Tune_Mview To Optimize Materialized Views For Fast Refresh' and am receiving an error suggesting the user4 does Not have the Advisor privilege
despite the fact that it does. What am I missing ?
Every note I've found so far suggests granting the privilege is the fix.
I have and continue to receive the error.
Version 11.2.0.3 on Redhat 5
select * from dba_sys_privs where grantee = 'SOAUSER';
GRANTEE                        PRIVILEGE                                ADM
SOAUSER                        CREATE MATERIALIZED VIEW                 NO
SOAUSER                        CREATE VIEW                              NO
SOAUSER                        CREATE PUBLIC SYNONYM                    NO
SOAUSER                        SELECT ANY DICTIONARY                    NO
SOAUSER                        ON COMMIT REFRESH                        NO
SOAUSER                        CREATE ANY DIRECTORY                     NO
SOAUSER                        CREATE DATABASE LINK                     NO
SOAUSER                        SELECT ANY TABLE                         NO
SOAUSER                        ADVISOR                                  NO
SOAUSER                        UNLIMITED TABLESPACE                     NO
SOAUSER                        CREATE SESSION                           NO
Error at line 2
ORA-13616: The current user SOAUSER has not been granted the ADVISOR privilege.
ORA-06512: at "SYS.PRVT_ADVISOR", line 4869
ORA-06512: at "SYS.DBMS_ADVISOR", line 1969
ORA-06512: at "SYS.PRVT_TUNE_MVIEW", line 490
ORA-06512: at "SYS.PRVT_TUNE_MVIEW", line 970
ORA-06512: at "SYS.DBMS_ADVISOR", line 739
ORA-06512: at line 3
Thanks in Advance
Ken

Sorry, but the code I was receiving the error message for is essentially   the same as the example in the note. Assumed people would have access to the note.
The statement is:
variable foo varchar2(20);
declare foo varchar2(20) := 'ken_foo';
begin
dbms_advisor.tune_mview(:foo,
'create materialized view ken_foo
as
select
papf.rowid R_papf,
paaf.rowid R_paaf,
gcc.rowid R_gcc,
papf.employee_number,
gcc.segment4 cost_center
from hr.per_all_people_f@atc_pp_to_ebs_atcllc papf,
     hr.per_all_assignments_f@atc_pp_to_ebs_atcllc paaf,
     gl.gl_code_combinations@atc_pp_to_ebs_atcllc gcc
where papf.person_id = paaf.person_id
--and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
--and trunc(sysdate) between paaf.effective_start_date and paaf.effective_end_date
and paaf.default_code_comb_id = gcc.code_combination_id');
end;
Per another forum the answer appears to be that sys didn’t have the advisor privilege.
Granted advisor to sys and ran the statement again as soauser and no error.
Thanks
Ken

Errors using DBMS_SQLTUNE Advisors for Oracle 10g

I get errors trying to tune the below query for Oracle 10g using the DBMS_SQLTUNE advisors.
It happens when I wrap either a large block of PL/SQL code that uses bind variables or multiple nested subqueries with multiple JOIN conditions in a SELECT query statement that I wish to tune using the 10g SQLTUNE advisors.
Message was edited by:
benprusinski

Hi, I was trying to use the DBMS_SQLTUNE package to tune my sql statements used in the huge procedure. I can successfully create a task and execute it. But when I run report tuning task, I'm always getting error like the one in below example. Two questions I have now.
1) Is this becuase I'm using bind, but not passing any values?
2) Can I able to use to this package to tune a procedures instead of sql statement?
Example output...
SQL> SELECT DBMS_SQLTUNE.REPORT_TUNING_TASK( 'my_sql_tuning_task3')
2 FROM DUAL;
DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK3')
GENERAL INFORMATION SECTION
Tuning Task Name : my_sql_tuning_task3
Tuning Task Owner : SCOTT
Scope : COMPREHENSIVE
Time Limit(seconds) : 3000
Completion Status : COMPLETED
Started at : 02/26/2009 21:44:41
Completed at : 02/26/2009 21:44:41
Number of Errors : 1
DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK3')
Schema Name: KPRAVEEN
SQL ID : 479831s42xj1n
SQL Text : SELECT a.pdrorn, a.pdrcto, a.pdrlln FROM f4311 a
WHERE a.pddoco = receiptsrcrec.prdoco AND a.pddcto = :2 AND
a.pdkcoo = :3 AND a.pdsfxo = :4 AND a.pdlnid = :5
ERRORS SECTION
SQL>

Backups failing with error 19: the backup disk could not be resolved, or there was a problem mounting it

Hello all,
Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
Time Capsule won't backup if Modem (Motorola SB6121) attached
This was on Feb 10th resolved. Few days later I upgraded to Yosemite. Backups were working fine since.
Yesterday I happen to notice my last backup was 5 days ago. I looked in the console logs and saw:
2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
I called Apple. Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
But the next hour it failed
Called Apple again, this time to Sr Advisor. He suggested factory reset of the TC and set up again. Also first backup worked then rest failed
Third call to Apple useless also. He was asking questions I didn't feel relevant. He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
I begged him to collect data to submit to engineering, which will take days to get a reply.
So I thought I would throw this out to the community....
TC Is NEW (replaced from last issue). Mac is 8 months old (iMac 27"), Os is Yosemite, TC also new (latest model)
Thanks...

Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

Anyone can help to advice how to solve this issue ?

Unable to Update iPhoto after upgrading to Maverick. Error "There was an error in the App Store. Please try again later. (20)". Please help.

Hello,
I just updated my software to Mavericks and I have been trying to update iPhoto on my system without success. Error from App Store is "There was an error in the App Store. Please try again later. (20)".
Can anyone help with this please.
Thank you.

Try this:
Make sure this checkbox is checked in the System/Sharing preference pane:
If it is, uncheck it and then recheck and try ordering again.
OT

I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any sugge

I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any suggestions on how I could kill this error message? Thanks.
iMac, Mac OS X (10.7.2)
Basically i tried to enter too much information into my calendar and it has crashed now i can not get rid of the error message or use the calendar can anyone help please

did you find ou how to get rid of it i can't

Error in the bind variable!!

Hi all,
I have the following quiery in my report
SQL> ed
Wrote file afiedt.buf
1* select add_months(to_date('30-apr-07') , rownum- 1) i from all_objects where rownum < 5
SQL> /
I
30-APR-07
31-MAY-07
30-JUN-07
31-JUL-07Now I wrote a finction in the group as
function CF_bFormula return Number is
b number(17, 3);
begin
select t.B_VAL into b from test6152 t where to_date(t.i_date, 'dd-mon-yy') = to_date(:i, 'dd-mon-yy');
return (b);
end;The this function is giving me an error. ORA-01403 No data found
Can anyone point out the error.
The structure of the TEST6152 table is like this
SQL> select * from test6152;
I_DATE    CUR      B_VAL      C_VAL
30-APR-07 USD         20         30
31-MAY-07 USD         50         10
30-JUN-07 USD         25         18
31-JUL-07 USD         13         12Im quite confused beacuse this quiery gives me the correct output
SQL> ed
Wrote file afiedt.buf
1 select t.B_VAL from test6152 t,
2 (select    add_months(to_date('30-apr-07') , rownum- 1) i from all_objects where rownum < 5) L
3* WHERE to_date(t.i_date, 'dd-mon-yy') = to_date(I, 'dd-mon-yy')
SQL> /
     B_VAL
        20
        50
        25
        13Thanks in advance

Today I restart my comp and run the report and ....Woah!
It runs without ant error!!!
I wonder what went wrong yesterday!

Error while saving Adobrforms: There was a error reading the document(26)

Hello,
Am not able to save the pdf form.
Error : "The document could not be saved.There was a error reading the document(26)."
Can anyone please tell me why i am getting this error.
Thanks,
satheesh

Hi Satheesh,
Can you give more details about your scenario..
Regards,
Ravi

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." I am obviously connected to the internet since you are reading this.
I tried upgrading permissions but it did not help!? Can anyone tell me what is wrong? Thanks

Try
Reboot the computer, see if that fixes it.
Then try:
Backup your files off the computer (not TimeMachine) and disconnect
Hold c boot off the 10.6 disk and simply reinstalling OS X
Log in and update to 10.6.8
c boot off the 10.6 disk again and use Disk Utility >Repair Disk
reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

Error in the standard HRforms

Dear All,
i cant able to activate the Std HR forms " SAP_TIM_99_0001". its throwing the error in the HR forms generated Print program like "P_IPVIEW" is unknown.
if you have come across the same situation please provide me the solution.
Thanks
Yogesh

No child found in WebDynproContext with name "mss~hras "
check the code where you define that.
see the thhread below which is similar issue
Description attribute of PCD element
Points are welcome if it is helpful
Koti Reddy

Error in the Advisor

Similar Messages

Maybe you are looking for